| Age | Commit message (Collapse) | Author |
|---|
|
Thanks to Nicolai Haehnle for pointing this out on IRC.
|
|
Thanks to the reworked vblank-rework, we can just use the hardware frame
counter directly, and make the RADEON_PARAM_VBLANK_CRTC getparam just return
what was set by the corresponding setparam.
|
|
All interrupt off vblank count updates are done in drm_vblank_get/put
now, so convert users of the vblank counter over to that interface.
|
|
|
|
|
|
Remove the unused (and broken) "in vblank" code now that the core has
been fixed to use a counter while interrupts are enabled. Also make the
vblank pipe get/set ioctls into dumb stub functions, since with the new
code we can no longer let userspace control whether vblank interrupts
are enabled, or the core code will misbehave.
|
|
modifications to make it work correctly on my test hardware (altered the
backlight write function, made it enable the legacy backlight controller
interrupts on mobile hardware, sorted the interrupt function so we don't
get an excessive number of vblank interrupts). This lets the backlight
keys on my T61 work properly, though there's a 750msec or so delay
between the request and the brightness actually changing - this sounds
awfully like the hardware spinning waiting for a status flag to become
ready, but as far as I can tell they're all set correctly. If anyone can
figure out what's wrong here, it'd be nice to know.
Some of the functions are still stubs and just tell the hardware that
the request was successful. These can be filled in as kernel modesetting
gets integrated. I think it's worth getting this in anyway, since it's
required for backlight control to work properly on some new platforms.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
|
|
|
|
|
|
Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com>
|
|
When scheduled swaps occur, we need to blit between front & back buffers. I
the buffers are tiled, we need to set the appropriate XY_SRC_COPY tile bit,
only on 965 chips, since it will cause corruption on pre-965 (e.g. 945).
Bug reported by and fix tested by Tomas Janousek <tomi@nomi.cz>.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
|
|
We won't get a PFIFO context switch when the same channel ID is recreated if
the hw still thinks the channel is already active, which causes fun issues.
Should allow X to be stopped and started without tearing down the entire
card state in lastclose().
|
|
It would be nice if one day the DRM driver was the canonical source for
register definitions and core macros. To that end, this patch cleans things up
quite a bit, removing redundant definitions (some with different names
referring to the same register) and generally tidying up the header file.
|
|
|
|
We depend on the VM fully now for memory protection, separate DMA objects
for VRAM and GART are unneccesary. However, until the next interface break
(soon) a client can't depend on the objects being the same and must still
call NV_OBJ_SET_DMA_* methods appropriately.
|
|
This avoids seeing garbage from engine setup etc before X gets around
to pointing the CRTCs at a new scanout buffer. Not actually a noticable
problem before G80 as PRAMIN is forced to the end of VRAM by the hardware
already.
|
|
See bug 14289
|
|
|
|
Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com>
|
|
|
|
|
|
|
|
|
|
This patch should fixe hard lockup and convert them in
softlockup (ie you can ssh the box but the gpu is busted
and we are waiting in loop for it to come back to reason).
|
|
According to the hw guys, you should use DSTCACHE_CTLSTAT to flush
the 2D dst cache rather than RB2D_DSTCACHE_CTLSTAT.
|
|
|
|
GART setup appears to work the same as RS480 chips.
Also RC4xx chips are actually RS400 based, not RS480 based.
|
|
|
|
Reported by vehemens
|
|
|
|
|
|
Fixes performance drop after suspend/resume on some systems.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The i915 driver now works again.
|
|
|
|
|
|
The new display controller has the vblank interrupts in a different place.
Add support for vbl interrupts for these chips
|
|
|
|
RS400 (intel based IGP) and RS480 (AMD based IGP) have
different MC and GART setups. Currently we only support
RS480.
|
|
|
|
Similar (broken) code in mesa needs to be removed
|
|
|
|
|
