renesas/drm.git - libdrm, cloned from git://anongit.freedesktop.org/mesa/drm

Age	Commit message (Collapse)	Author
2008-05-12	fix G33 hardware status page in modeset	Hong Liu
	We need to alloc a hw status page bo for G33 if modeset is enabled since the 2D driver can't alloc gfx memory when working in drm modeset.
2008-05-12	drm: remove root only from a lot of drm ioctls to get stuff running as non-root	Dave Airlie

2008-05-09	fixup i915 workqueue handling when modeset=1	Hong Liu
	Fixup workqueue creation error handling and make sure we destroy the queue on unload.
2008-05-09	i915: add basic VBT support	Jesse Barnes
	Map the VBIOS (and therefore VBT) at init time for use by various output initialization routines.
2008-05-08	i915: Changed intel_fb to use the new drm_crtc_set_config interface	Jakob Bornecrantz

2008-05-08	Revert "i915: fix vbl swap for multi-master"	Dave Airlie
	This reverts commit 2a78ad22647933aa8842d534bce6495ff93fbf76.
2008-05-08	i915: fix vbl swap for multi-master	Dave Airlie
	patch from F9 tree
2008-05-08	drm_mode: initial replacefb implemenation	Dave Airlie

2008-05-08	Merge remote branch 'origin/master' into modesetting-101	Dave Airlie
	Conflicts: linux-core/Makefile.kernel shared-core/i915_drv.h
2008-05-05	r500: add allowed range for us config/pixsize	Dave Airlie

2008-05-02	nv50: enable 0x400500 bit 0 after PGRAPH exception also	Ben Skeggs
	No solid idea about what these 2 bits do, but nv50 can now survive a few PGRAPH exceptions just as nv40 does :)
2008-05-02	nouveau: guard against channels potentially not having a context, fix nv50	Ben Skeggs

2008-05-02	nouveau: disable all card interrupts when unknown PFIFO IRQ occurs.	Ben Skeggs
	This is possibly temporary. I can trigger an unending IRQ storm on G8x in some circumstances, and have no idea how to handle that particular PFIFO exception correctly yet.
2008-05-02	nouveau: restore original NV_PFIFO_CACHES_REASSIGN value in fifo handler	Ben Skeggs
	Doesn't fix any issue I've seen, but is a potential issue if a FIFO IRQ occurs during channel creation/takedown.
2008-05-02	nouveau: gather nsource in trap_info()	Ben Skeggs
	The IRQ handling stuff really is a mess.. On the TODO :)
2008-05-02	nv50: PGRAPH exception handling completely different from earlier chips	Ben Skeggs

2008-05-01	nv50: I cave... Add nv84 initial context values.	Ben Skeggs
	I swore I'd actually do this properly and not go the horrible route we did with nv4x, but I won't get around to it just yet with so many actually interesting things to do first.. One day. Since someone already added nv86, why not!
2008-04-29	i915: fix off by one in VGA save/restore of AR & CR regs	Jesse Barnes
	Turns out it's important to save/restore AR14 in particular.
2008-04-29	nouveau: NV9x cards exist as well.	Maarten Maathuis

2008-04-28	Merge branch 'master' into modesetting-101	Thomas Hellstrom
	Conflicts: linux-core/Makefile.kernel linux-core/drm_compat.c linux-core/drm_fops.c linux-core/drm_lock.c shared-core/drm.h shared-core/i915_dma.c shared-core/i915_drv.h shared-core/i915_irq.c
2008-04-27	Use fixed sized types in new ioctls	Jesse Barnes
	Make both crtc and the command argument 32 bits to avoid any 32-on-64 compat issues.
2008-04-26	Enum-ectomy of vblank modesetting ioctl	Jesse Barnes
	Enum can be of pretty much any size since C leaves the choice of size up to the implementation. So avoid using it in new interfaces like the vblank pre- & post-modeset ioctl. Thanks to hch for spotting this.
2008-04-23	Make radeon_ms compile.	Kristian Høgsberg
	Remove lock functions and use pci_map_rom() instead of pci_map_rom_copy().
2008-04-23	i915: fix for compatibility mode	Xiang, Haihao

2008-04-22	i915: allocate devname at init time	Jesse Barnes
	Since it'll be freed at unload time, we should alloc devname rather than pointing to the DRIVER_NAME string.
2008-04-22	clear interrupt status before install irq	Hong Liu
	On my 865G machine, it seems the CPU will receive interrupt before irq_postinstall is called. This will cause kernel oops because vblank is not inited at that time. Clear interrupt status before install seems fixing this problem. Signed-off-by: Hong Liu <hong.liu@intel.com>
2008-04-22	i915: gfx hw and i945gme fixes from upstream	Dave Airlie
	From Jesse and Zhenyu originally.
2008-04-20	[I915] Handle tiled buffers in vblank tasklet	Keith Packard
	The vblank tasklet update code must build 2D blt commands with the appropriate tiled flags.
2008-04-20	On I965, use correct 3DSTATE_DRAWING_RECTANGLE command in vblank	Keith Packard
	The batchbuffer submission paths were fixed to use the 965-specific command, but the vblank tasklet was not. When the older version is sent, the 965 will lock up.
2008-04-17	Porting DVO stuff	Hong Liu
	Ported from Xorg intel 2d driver. Changed interfaces definitions, which needed to be changed later if other device wants to use these DVO stuff.
2008-04-11	Save and restore dsparb and d_state regs	Keith Packard

2008-04-12	Merge branch 'modesetting-101' of ssh://git.freedesktop.org/git/mesa/drm ↵	Jerome Glisse
	into modesetting-101
2008-04-12	radeon_ms: rework command submission ioctl & cleanup	Jerome Glisse

2008-04-09	Add TV out hotplug detection	Jesse Barnes
	Doesn't yet work on my i915 test machine, but most of the necessary bits should be there.
2008-04-08	Merge branch 'modesetting-101' of ssh://git.freedesktop.org/git/mesa/drm ↵	Jesse Barnes
	into modesetting-101
2008-04-08	Add devname in modeset case	Jesse Barnes
	If the driver is 'modeset' enabled, it'll register it's interrupt handler at load time. Set the devname in this case so that /proc/interrupts makes sense.
2008-04-08	radeon_ms: command buffer validation use array of function pointer	Jerome Glisse

2008-04-06	radeon_ms: fix framebuffer code	Jerome Glisse

2008-04-06	radeon_ms: check for NULL fb	Jerome Glisse

2008-04-05	nv50: primitive i2c interrupt handler	Maarten Maathuis

2008-04-03	radeon_ms: add crtc set base callback & fix palette	Jerome Glisse

2008-04-03	nv50: primitive display interrupt handler.	Maarten Maathuis

2008-03-31	radeon_ms: small fix & cleanup to command checking	Jerome Glisse

2008-03-31	nouveau: fix return from function..	Dave Airlie
	dude kernel moduless use kernel errors :) this fixes an oops on init when this codepath hits.
2008-03-31	radeon_ms: initial pass at command buffer validation	Jerome Glisse

2008-03-30	nouveau: forgot to add a break	Maarten Maathuis

2008-03-30	nouveau: Add ctx values for nv86.	Maarten Maathuis
	- Note that this may not work for all nv86.
2008-03-30	radeon_ms: add hang debuging helper functions	Jerome Glisse

2008-03-30	drm/r300: fix wait interface mixup	Dave Airlie
	This interface was defined completely wrong, however userspace has only ever used 4 values from it (0x1, 0x2, 0x3 and 0x6), so fix the interface to do what userspace actually expected but define new defines for new users to use it properly.
2008-03-29	r300: Correctly translate the value for the R300_CMD_WAIT command.	Oliver McFadden
	Previously, the R300_CMD_WAIT command would write the passed directly to the hardware. However this is incorrect because the R300_WAIT_* values used are internal interface values that do not map directly to the hardware. The new function I have added translates the R300_WAIT_* values into appropriate values for the hardware before writing the register. Thanks to John Bridgman for pointing this out. :-)