summaryrefslogtreecommitdiff
path: root/shared-core
AgeCommit message (Collapse)Author
2008-05-08i915: Changed intel_fb to use the new drm_crtc_set_config interfaceJakob Bornecrantz
2008-05-08Revert "i915: fix vbl swap for multi-master"Dave Airlie
This reverts commit 2a78ad22647933aa8842d534bce6495ff93fbf76.
2008-05-08i915: fix vbl swap for multi-masterDave Airlie
patch from F9 tree
2008-05-08drm_mode: initial replacefb implemenationDave Airlie
2008-05-08Merge remote branch 'origin/master' into modesetting-101Dave Airlie
Conflicts: linux-core/Makefile.kernel shared-core/i915_drv.h
2008-05-05r500: add allowed range for us config/pixsizeDave Airlie
2008-05-02nv50: enable 0x400500 bit 0 after PGRAPH exception alsoBen Skeggs
No solid idea about what these 2 bits do, but nv50 can now survive a few PGRAPH exceptions just as nv40 does :)
2008-05-02nouveau: guard against channels potentially not having a context, fix nv50Ben Skeggs
2008-05-02nouveau: disable all card interrupts when unknown PFIFO IRQ occurs.Ben Skeggs
This is possibly temporary. I can trigger an unending IRQ storm on G8x in some circumstances, and have no idea how to handle that particular PFIFO exception correctly yet.
2008-05-02nouveau: restore original NV_PFIFO_CACHES_REASSIGN value in fifo handlerBen Skeggs
Doesn't fix any issue I've seen, but is a potential issue if a FIFO IRQ occurs during channel creation/takedown.
2008-05-02nouveau: gather nsource in trap_info()Ben Skeggs
The IRQ handling stuff really is a mess.. On the TODO :)
2008-05-02nv50: PGRAPH exception handling completely different from earlier chipsBen Skeggs
2008-05-01nv50: I cave... Add nv84 initial context values.Ben Skeggs
I swore I'd actually do this properly and not go the horrible route we did with nv4x, but I won't get around to it just yet with so many *actually* interesting things to do first.. One day. Since someone already added nv86, why not!
2008-04-29i915: fix off by one in VGA save/restore of AR & CR regsJesse Barnes
Turns out it's important to save/restore AR14 in particular.
2008-04-29nouveau: NV9x cards exist as well.Maarten Maathuis
2008-04-28Merge branch 'master' into modesetting-101Thomas Hellstrom
Conflicts: linux-core/Makefile.kernel linux-core/drm_compat.c linux-core/drm_fops.c linux-core/drm_lock.c shared-core/drm.h shared-core/i915_dma.c shared-core/i915_drv.h shared-core/i915_irq.c
2008-04-27Use fixed sized types in new ioctlsJesse Barnes
Make both crtc and the command argument 32 bits to avoid any 32-on-64 compat issues.
2008-04-26Enum-ectomy of vblank modesetting ioctlJesse Barnes
Enum can be of pretty much any size since C leaves the choice of size up to the implementation. So avoid using it in new interfaces like the vblank pre- & post-modeset ioctl. Thanks to hch for spotting this.
2008-04-23Make radeon_ms compile.Kristian Høgsberg
Remove lock functions and use pci_map_rom() instead of pci_map_rom_copy().
2008-04-23i915: fix for compatibility modeXiang, Haihao
2008-04-22i915: allocate devname at init timeJesse Barnes
Since it'll be freed at unload time, we should alloc devname rather than pointing to the DRIVER_NAME string.
2008-04-22clear interrupt status before install irqHong Liu
On my 865G machine, it seems the CPU will receive interrupt before irq_postinstall is called. This will cause kernel oops because vblank is not inited at that time. Clear interrupt status before install seems fixing this problem. Signed-off-by: Hong Liu <hong.liu@intel.com>
2008-04-22i915: gfx hw and i945gme fixes from upstreamDave Airlie
From Jesse and Zhenyu originally.
2008-04-20[I915] Handle tiled buffers in vblank taskletKeith Packard
The vblank tasklet update code must build 2D blt commands with the appropriate tiled flags.
2008-04-20On I965, use correct 3DSTATE_DRAWING_RECTANGLE command in vblankKeith Packard
The batchbuffer submission paths were fixed to use the 965-specific command, but the vblank tasklet was not. When the older version is sent, the 965 will lock up.
2008-04-17Porting DVO stuffHong Liu
Ported from Xorg intel 2d driver. Changed interfaces definitions, which needed to be changed later if other device wants to use these DVO stuff.
2008-04-11Save and restore dsparb and d_state regsKeith Packard
2008-04-12Merge branch 'modesetting-101' of ssh://git.freedesktop.org/git/mesa/drm ↵Jerome Glisse
into modesetting-101
2008-04-12radeon_ms: rework command submission ioctl & cleanupJerome Glisse
2008-04-09Add TV out hotplug detectionJesse Barnes
Doesn't yet work on my i915 test machine, but most of the necessary bits should be there.
2008-04-08Merge branch 'modesetting-101' of ssh://git.freedesktop.org/git/mesa/drm ↵Jesse Barnes
into modesetting-101
2008-04-08Add devname in modeset caseJesse Barnes
If the driver is 'modeset' enabled, it'll register it's interrupt handler at load time. Set the devname in this case so that /proc/interrupts makes sense.
2008-04-08radeon_ms: command buffer validation use array of function pointerJerome Glisse
2008-04-06radeon_ms: fix framebuffer codeJerome Glisse
2008-04-06radeon_ms: check for NULL fbJerome Glisse
2008-04-05nv50: primitive i2c interrupt handlerMaarten Maathuis
2008-04-03radeon_ms: add crtc set base callback & fix paletteJerome Glisse
2008-04-03nv50: primitive display interrupt handler.Maarten Maathuis
2008-03-31radeon_ms: small fix & cleanup to command checkingJerome Glisse
2008-03-31nouveau: fix return from function..Dave Airlie
dude kernel moduless use kernel errors :) this fixes an oops on init when this codepath hits.
2008-03-31radeon_ms: initial pass at command buffer validationJerome Glisse
2008-03-30nouveau: forgot to add a breakMaarten Maathuis
2008-03-30nouveau: Add ctx values for nv86.Maarten Maathuis
- Note that this may not work for all nv86.
2008-03-30radeon_ms: add hang debuging helper functionsJerome Glisse
2008-03-30drm/r300: fix wait interface mixupDave Airlie
This interface was defined completely wrong, however userspace has only ever used 4 values from it (0x1, 0x2, 0x3 and 0x6), so fix the interface to do what userspace actually expected but define new defines for new users to use it properly.
2008-03-29r300: Correctly translate the value for the R300_CMD_WAIT command.Oliver McFadden
Previously, the R300_CMD_WAIT command would write the passed directly to the hardware. However this is incorrect because the R300_WAIT_* values used are internal interface values that do not map directly to the hardware. The new function I have added translates the R300_WAIT_* values into appropriate values for the hardware before writing the register. Thanks to John Bridgman for pointing this out. :-)
2008-03-27radeon_ms: this is a modesetting driver, bring things up to dateJerome Glisse
2008-03-25nouveau: nv20 bios does not initialise PTIMERStuart Bennett
The wait functions depend on PTIMER, so write the old (incorrect, but working) values for uninitialised hw
2008-03-24i915: fix oops on agp=offDave Airlie
Kernel bug 10289.
2008-03-24Merge branch 'r500-fp'Dave Airlie