| Age | Commit message (Collapse) | Author |
|---|
|
|
|
This is precursor to getting a TTM backend for this stuff, and also
allows the PCI table to be allocated at fb 0
|
|
This code doesn't enable a variable aperture it just modifies the codebase
to allow me fix it up later
|
|
The overflows could lead to the AGP aperture overlapping the framebuffer area
in the card's address space when the latter is located at the very end of the
32 bit address space, which would result in a freeze on X server startup,
probably because the card read commands from the framebuffer instead of from
AGP.
See http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=392915 .
|
|
|
|
This reverts af7b89d7246efbed7d05c38fcaa6a13c4b89db90 commit. It causes an oops
on X server shutdown here, and for the reporter of bug #7629 as well.
|
|
Commit 2a47f6bfecea5dabcbf79d5e1aaf271f50070b89 caused the CHIP_IS_AGP flag to
get 'restored' with PCI(e) cards. I can't think of a way to fix this without
introducing a (otherwise redundant) CHIP_IS_PCI flag.
|
|
|
|
The latter seems to be a read-only mirror of the former.
|
|
This allows using AGP after overriding to PCI mode in a previous session
without reloading the DRM.
|
|
Not doing this might waste bus bandwidth or even cause memory corruption or
system crashes on systems that check bus transfers. No such incident has been
reported though.
|
|
From: tilman
|
|
perfect but should be very safe... align some other kernel bits i810
align with kernel
|
|
chips may be problematic). Leave the existing entries for new chips in
though. Remove ids not known by ddx (secondary ids, non-existant,...).
Correct some entries (name/family). Make the radeon family enum look
more alike the ddx/dri versions. See #5413
|
|
|
|
|
|
|
|
|
|
that particular file. Its contents have changed a good bit since the
original sis code, and the original sis code didn't care much about
attribution since it routinely disclaims Precision Insight/VA Linux
from responsibility. Also, adjust formatting around license headers
(have a comment open immediately before the "Copyright" line, not as a
runon of any previous comments) for automatic processing into FreeBSD,
where /*- is used to signal the beginning of license headers for
automatic compilation of license lists.
|
|
radeon_cp.c to use a drm_local_map_t-type mapping (drm_core_ioremap
rather than drm_ioremap), which contains private device mapping
information on BSD. I also changed the ati_pcigart interface to use
"void *" for pointers to kva rather than "unsigned long". While PCIGART
support appears to be broken on FreeBSD currently, I think this is not
new, and BusType PCI remains working on my r100 in Linux.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
understandable: preinit -> load postinit -> (removed) presetup ->
firstopen postsetup -> (removed) open_helper -> open prerelease ->
preclose free_filp_priv -> postclose pretakedown -> lastclose
postcleanup -> unload release -> reclaim_buffers_locked version ->
(removed)
postinit and version were replaced with generic code in the Linux DRM
(drivers now set their version numbers and description in the driver
structure, like on BSD). postsetup wasn't used at all. Fixes the savage
hooks for initializing and tearing down mappings at the right times.
Testing involved at least starting X, running glxgears, killing
glxgears, exiting X, and repeating.
Tested on: FreeBSD (g200, g400, r200, r128) Linux (r200, savage4)
|
|
the driver already knew their correct value. For example the physical
address of the framebuffer and registers.
|
|
with BSD fix from jkim and the r300_reg.h license from Nicolai Haehnle.
Big thanks to everyone involved!
|
|
code duplication, and it also hands you the map pointer so you don't
need to re-find it.
- Remove the permanent maps flag. Instead, for register and framebuffer
maps, we always check whether there's already a map of that type and
offset around. Move the Radeon map initialization into presetup (first
open) so it happens again after every takedown.
- Remove the split cleanup of maps between driver takedown (last close) and
cleanup (module unload). Instead, always tear down maps on takedown,
and drivers can recreate them on first open.
- Make MGA always use addmap, instead of allocating consistent memory in
the PCI case and then faking up a map for it, which accomplished nearly
the same thing, in a different order. Note that the maps are exposed to
the user again: we may want to expose a flag to avoid this, but it's
not a security concern, and saves us a lot of code.
- Remove rmmaps in the MGA driver. Since the function is only called during
takedown anyway, we can let them die a natural death.
- Make removal of maps happen in one function, which is called by both
drm_takedown and drm_rmmap_ioctl.
Reviewed by: idr (previous revision) Tested on: mga (old/new/pci dma),
radeon, savage
|
|
zero does not mean no privs, instead it grants write access
_DRM_READ_ONLY only applies to non-root users. Problem is only in CVS,
initmaps are not in the kernel yet.
|
|
radeonfb.
|
|
sleep-with- mutex held. This probably ought to be an os-independent
sleep function ala DRM_USLEEP.
|
|
|
|
FreeBSD. Add drm_get_resource_{start|len} so linux-specific stuff
doesn't need to be in shared code.
- Fix mach64 build by using __DECONST to work around passing a const
pointer to useracc, which is unfortunately not marked const.
- Get rid of a lot of maplist code by not having dev->maplist be a pointer,
and by sticking the link entries directly in drm_local_map_t rather
than having a separate structure for the linked list.
- Factor out map uninit and removal into its own routine, rather than
duplicating in both drm_takedown() and drm_rmmap().
- Hook up more driver functions, and correct FreeBSD-specific bits of
radeon_cp.c, making radeon work.
- Baby steps towards using bus_space as we should.
|
|
|
|
drm. Add new ioctls to manage surfaces which cover the tiled areas
|
|
|
|
clear and z buffer compression are working correctly, hierarchical-z is
not.
|
|
doesn't run yet. Moves the ioctl definitions for these two drivers back
to the shared code -- they aren't OS-specific.
|
|
helping
2D operations.
Ups radeon to version 1.12.0, Vladimir, you might want to add any extra
pciids...
Approved-by: Dave Airlie <airlied@linux.ie>
|
|
functions are not identical.
|
|
weren't Lindent's because their comments didn't convert very well. A
bunch of other minor clean up with no code implact included.
|
|
get_order from drm_order.
|
|
|
|
VGA driver when it gets written.
|
|
|
|
files to the linux build but not to the BSD directories.
|
|
code Linux specific.
|
|
|
