Age | Commit message (Collapse) | Author | |
---|---|---|---|
2007-10-10 | nouveau : nv10 and nv04 PGRAPH_NSTATUS are different | Matthieu Castet | |
2007-10-06 | nouveau : print correct value in nouveau_graph_dump_trap_info for nv04 | Matthieu Castet | |
2007-09-30 | nouveau: let nv20 hardware do ctx switching automatically. | Pekka Paalanen | |
2007-09-30 | nouveau: NV30 should never call nouveau_nv20_context_switch(). | Pekka Paalanen | |
2007-08-26 | nouveau : add NV04_PGRAPH_TRAPPED_ADDR definition | Matthieu Castet | |
- fix offset for nv04 - use it in nv10 graph ctx switch for getting next channel - dump NV10_PGRAPH_TRAPPED_DATA_HIGH on nv10+ | |||
2007-08-09 | nouveau: silence irq handler a bit | Ben Skeggs | |
2007-08-08 | nouveau: return channel id | Ben Skeggs | |
2007-08-08 | nouveau: enable/disable engine-specific interrupts in _init()/_takedown() | Ben Skeggs | |
All interrupts are still masked by PMC until init is finished. | |||
2007-08-07 | nouveau : fix enable irq (in the previous code all irq were masked by engine | Matthieu Castet | |
init after irq_postinstall) | |||
2007-08-06 | nouveau: Determine trapped channel id from active grctx on >=NV40 | Ben Skeggs | |
2007-07-18 | nouveau: Add bitfield names for NSOURCE and NSTATUS. | Pekka Paalanen | |
Name strings and pretty-printing in nouveau_graph_dump_trap_info(). | |||
2007-07-18 | nouveau: Replace 0x00400104 and 0x00400108 with names. | Pekka Paalanen | |
NV03_PGRAPH_NSTATUS and NV03_PGRAPH_NSOURCE. The prefix NV03 is chosen because nv10reg.h had no versioned prefix, and the code using these registers does not check card_type. | |||
2007-07-14 | nouveau: nv10 and nv11/15 are different | Patrice Mandin | |
2007-07-13 | nouveau: nuke internal typedefs, and drm_device_t use. | Ben Skeggs | |
2007-07-09 | nouveau/nv50: Initial channel/object support | Ben Skeggs | |
Should be OK on G84 for a single channel, multiple channels *almost* work. Untested on G80. | |||
2007-07-09 | nouveau: enable reporting for all PFIFO/PGRAPH irqs | Ben Skeggs | |
2007-05-08 | nouveau : fix fifo context size for nv10 | Matthieu Castet | |
2007-03-26 | nouveau: move card initialisation into the drm | Ben Skeggs | |
The PGRAPH init for the various cards will need cleaning up at some point, a lot of the values written there are per-context state left over from the all the hardcoding done in the ddx. It's possible some cards get broken by this commit, let me know. Tested on: NV5, NV18, NV28, NV35, NV40, NV4E | |||
2007-03-07 | nouveau: ack PFIFO interrupts at PFIFO, not PMC. | Ben Skeggs | |
2007-02-28 | nouveau: intrusive drm interface changes | Ben Skeggs | |
graphics objects: - No longer takes flags/dmaobj parameters, requires some major changes to the ddx to setup the object through the FIFO. This change is likely to cause breakages on some cards (tested on NV05,NV28,NV35, NV40 and NV4E). dma objects: - now takes a "class" parameter, not really used yet but we may need it at some point. - parameters are checked, so clients can't randomly create DMA objects pointing at whatever they feel like. misc: - Added FB_SIZE/AGP_SIZE getparams - Read PFIFO_INTR in PFIFO irq handler, not PMC_INTR - Dump PGRAPH trap info on PGRAPH_INTR_NOTIFY if NSOURCE isn't NOTIFICATION_PENDING. | |||
2007-02-03 | nouveau: and of course, I was missing the last nv04 piece. | Stephane Marchesin | |
2007-02-03 | nouveau: rename registers to their proper names. | Stephane Marchesin | |
2007-01-25 | nouveau: always print nsource/nstatus regs on PGRAPH errors | Ben Skeggs | |
2007-01-17 | nouveau: Try to get nv35 pgraph switching working. Doesn't quite yet. | Jeremy Kolb | |
Hook into nv20 pgraph switching functions (they're identical for nv3x). Actually call nv30_pgraph_context_init so the ctx_table is allocated. Thanks to Carlos Martin for the help. | |||
2007-01-13 | nouveau: nv20 graph ctx switch. | Matthieu Castet | |
Untested... | |||
2007-01-13 | nouveau: first step to make graph ctx works | Matthieu Castet | |
It is still not working, but now we could use some 3D commands without needed to run nvidia blob before. | |||
2007-01-05 | Add basic pgraph context for nv10. | Matthieu Castet | |
It only fake a context switch : pgraph state are not save/restored. | |||
2006-11-21 | Don't spam dmesg if PMC_INTSTAT is 0 | Ben Skeggs | |
2006-11-17 | Dump some useful info when a PGRAPH error occurs. | Ben Skeggs | |
The "channel" detect doesn't work on my nv40, but the rest seems to produce sane info. | |||
2006-10-18 | Oops, we have more than 4 subchannels.. | Ben Skeggs | |
2006-10-17 | Useful output on a FIFO error interrupt. | Ben Skeggs | |
2006-10-17 | typo | Ben Skeggs | |
2006-10-17 | NV40: FIFO context switching now WorksForMe(tm) | Ben Skeggs | |
2006-10-14 | Again more work on context switches. They work, sometimes. And when they do ↵ | Stephane Marchesin | |
they seem to screw up the PGRAPH state. | |||
2006-10-12 | Oops. | Stephane Marchesin | |
2006-10-12 | Still more work on the context switching code. | Stephane Marchesin | |
2006-10-12 | More work on the context switch code. Still doesn't work. I'm mostly ↵ | Stephane Marchesin | |
convinced it's an initialization issue. | |||
2006-10-11 | Context switching work. | Stephane Marchesin | |
Added preliminary support for context switches (triggers the interrupts, but hangs after the switch ; something's not quite right yet). Removed the PFIFO_REINIT ioctl. I hope it's that a good idea... Requires the upcoming commit to the DDX. | |||
2006-09-09 | Add copyright notices while I still remember.. | Ben Skeggs | |
2006-08-27 | initial import of nouveau code from nouveau CVS | Dave Airlie | |