| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
|
|
Turns out lastclose() gets called even if firstopen() has never been...
|
|
Should be OK on G84 for a single channel, multiple channels *almost* work.
Untested on G80.
|
|
Allows multiple references to a single object, needed to support PCI(E)GART
scatter-gather DMA objects which would quickly fill PRAMIN if each channel
had its own.
Handle per-channel private instmem areas. This is needed to support NV50,
but might be something we want to do on earlier chipsets at some point?
Everything that touches PRAMIN is a GPU object.
|
|
|
|
|
|
|
|
For various reasons, this ioctl was a bad idea.
At channel creation we now automatically create DMA objects covering
available VRAM and GART memory, where the client used to do this themselves.
However, there is still a need to be able to create DMA objects pointing at
specific areas of memory (ie. notifiers). Each channel is now allocated a
small amount of memory from which a client can suballocate things (such as
notifiers), and have a DMA object created which covers the suballocated area.
The NOTIFIER_ALLOC ioctl exposes this functionality.
|
|
NV04/NV10 load_context()/save_context() are stubs. I don't know enough about
how they work to implement them sanely. The "old" context_switch() code
remains hooked up, so it shouldn't break anything.
NV20 will probably break if load_context() works. No inital context values
are filled in, so when the first channel is created PGRAPH will probably end
up having its state zeroed. Some setup from nv20_graph_init() will probably
need to be moved to the per-channel context setup.
|
|
|
|
Earlier NV1X chips use the NV04 code, see previous commits about NV10 RAMFC
entry size.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The PGRAPH init for the various cards will need cleaning up at some point,
a lot of the values written there are per-context state left over from the
all the hardcoding done in the ddx.
It's possible some cards get broken by this commit, let me know.
Tested on: NV5, NV18, NV28, NV35, NV40, NV4E
|
|
|
|
|
|
|
|
|
|
graphics objects:
- No longer takes flags/dmaobj parameters, requires some major changes
to the ddx to setup the object through the FIFO. This change is
likely to cause breakages on some cards (tested on NV05,NV28,NV35,
NV40 and NV4E).
dma objects:
- now takes a "class" parameter, not really used yet but we may need
it at some point.
- parameters are checked, so clients can't randomly create DMA objects
pointing at whatever they feel like.
misc:
- Added FB_SIZE/AGP_SIZE getparams
- Read PFIFO_INTR in PFIFO irq handler, not PMC_INTR
- Dump PGRAPH trap info on PGRAPH_INTR_NOTIFY if NSOURCE isn't
NOTIFICATION_PENDING.
|
|
|
|
|
|
|
|
|
|
Untested...
|
|
It is still not working, but now we could use some 3D commands
without needed to run nvidia blob before.
|
|
* Pulled in some registers from nv10reg.h. Needed for context switching.
* Filled in nv30 graphics context (based on nv40_graph.c).
* Figure out nv30 context table, set up on context creation. Allows the cards automatic switching to work.
|
|
|
|
|
|
|
|
|
|
It only fake a context switch : pgraph state are not save/restored.
|
|
This is enough to get grctx switching going on my NV40 and C51 after
the binary driver has initialised the card first.
Bumping the drm patchlevel because the ddx needs some modifications to
have NV4x work at all with these changes.
|
|
|
|
|
|
Add getparams for AGP and FB physical adresses.
Fix the MEM_ALLOC issue properly.
Fix context switches for nv44.
Change the DRM version to 0.0.1.
|
|
|
|
This will make it easier to support extra RAMIN in vram at a later point.
|
|
- Do important card init in firstopen
- Give each channel it's own cmdbuf dma object
- Move RAMHT config state to the same place as RAMRO/RAMFC
- Make sure instance mem for objects is *after* RAM{FC,HT,RO}
|
|
On X init, PFIFO and PGRAPH are reset to defaults. This causes the GPU to
loose the configuration done by the drm. Perhaps a CARD_INIT ioctl a proper
solution to having this problem again in the future..
|
|
|
|
|
|
|
|
Added preliminary support for context switches (triggers the interrupts, but hangs after the switch ; something's not quite right yet).
Removed the PFIFO_REINIT ioctl. I hope it's that a good idea...
Requires the upcoming commit to the DDX.
|
|
|
