summaryrefslogtreecommitdiff
path: root/shared-core/i915_irq.c
AgeCommit message (Collapse)Author
2008-01-03drm: cleanup DRM_DEBUG() parametersMárton Németh
As DRM_DEBUG macro already prints out the __FUNCTION__ string (see drivers/char/drm/drmP.h), it is not worth doing this again. At some other places the ending "\n" was added. airlied:- I cleaned up a few that this patch missed also
2007-12-17drm: don't cast a pointer to pointer of list_headLi Zefan
The casting is safe only when the list_head member is the first member of the structure.
2007-12-07Fix pipe<->plane mapping vs. vblank handling (again)Jesse Barnes
If drmMinor >= 6, the intel DDX driver will enable vblank events on both pipes. If drmMinor >= 10 on pre-965 chipsets, the intel DDX driver will swap the pipe<->plane mapping to allow for framebuffer compression on laptop screens. This means the secondary vblank counter (corresponding to pipe B) will be incremented when vblank interrupts occur. Now Mesa waits for vblank events on whichever plane has a greater portion of the displayed window. So it will happly ask to wait for the primary counter even though that one won't increment. So we can fix this in either the DDX driver, Mesa or the kernel (though I thought we already had several times). Since current (and previous) userspace assumes it's talking about a pipe == plane situation and now uses planes when talking to the kernel, we should probably just hide the mapping details there (indeed they already are hidden there for vblank swaps), which this patch does. So as far as userland is concerned, whether we call things planes or pipes is irrelevant, as long as kernel developers understand that userland hands them planes and they have to figure out which pipe that corresponds to (which will typically be the same on 965+ hardware and reversed on pre-965 mobile chips).
2007-12-05Remove references to the sarea_priv perf_boxes field.Kristian Høgsberg
This field isn't touched or read by any other code in the stack so it's time to retire these last few references.
2007-11-06i915: cleanup most of the whitespaceDave Airlie
2007-11-05drm: remove lots of spurious whitespace.Dave Airlie
Kernel "cleanfile" script run.
2007-10-14i915: fix vbl_swap allocationDave Airlie
2007-09-18i915: Reinstate check that drawable has valid information in i915_vblank_swap.Michel Dänzer
2007-09-18i915: Fix scheduled buffer swaps.Michel Dänzer
One instance of unlocking a spinlock was converted incorrectly when this code was fixed to build on BSD.
2007-09-12Remove plane->pipe mapping from SAREA private after allJesse Barnes
We can figure out which pipe a given plane is mapped to by looking at the display control registers instead of tracking it in a new SAREA private field. If this becomes a performance problem, we could move to an ioctl based solution by adding a new parameter for the DDX to set (defaulting to the old behavior if the param was never set of course).
2007-09-11Disambiguate planes & pipes for swap operationsJesse Barnes
This mod makes the SAREA track plane to pipe mappings and corrects the name of the plane info variables (they were mislabeled as pipe info since until now all code assumed a direct mapping between planes and pipes). It also updates the flip ioctl argument to take a set of planes rather than pipes, since planes are flipped while pipes generate vblank events.
2007-07-20Replace DRM_IOCTL_ARGS with (dev, data, file_priv) and remove DRM_DEVICE.Eric Anholt
The data is now in kernel space, copied in/out as appropriate according to the This results in DRM_COPY_{TO,FROM}_USER going away, and error paths to deal with those failures. This also means that XFree86 4.2.0 support for i810 DRM is lost.
2007-07-20Replace filp in ioctl arguments with drm_file *file_priv.Eric Anholt
As a fallout, replace filp storage with file_priv storage for "unique identifier of a client" all over the DRM. There is a 1:1 mapping, so this should be a noop. This could be a minor performance improvement, as everything on Linux dereferenced filp to get file_priv anyway, while only the mmap ioctls went the other direction.
2007-07-20Remove DRM_ERR OS macro.Eric Anholt
This was used to make all ioctl handlers return -errno on linux and errno on *BSD. Instead, just return -errno in shared code, and flip sign on return from shared code to *BSD code.
2007-07-19Merge branch 'origin'Eric Anholt
2007-07-18Add dry-coded DRM drawable private information storage for FreeBSD.Eric Anholt
With this, all modules build again.
2007-07-16drm: remove drmP.h internal typedefsDave Airlie
2007-07-16drm: detypedef drm.h and fixup all problemsDave Airlie
2007-07-03One more spinlock initializer cleanup.Michel Dänzer
2007-06-03Revert "move i915 to new drm_wait_on function"root
This reverts commit feb68037784ac09e333a321d294fdb2d8c57a4c8. This was a bad idea, the macro is actually a bit harder to convert to a static for the other use cases
2007-05-26drm: spinlock initializer cleanupThomas Gleixner
2007-05-10Allow vblank interrupts to remain disabled across VT switch.Keith Packard
i915_driver_irq_postinstall was forcing vblank interrupts to pipe A when called with vblank interrupts disabled. This caused vblank interrupts to be accidentally re-enabled when VT switching the X server. Instead, start the driver with vblank interrupts enabled on pipe A to support older X servers, but then leave control over the state to the X server if it is able to do so.
2007-04-28move i915 to new drm_wait_on functionDave Airlie
2007-04-03Make sure we ack irqs before we read a breadcrumb so thatThomas Hellstrom
breadcrumb updates that occur _AFTER_ we've read the breadcrumb really generates a new IRQ.
2007-02-28i915: Eliminate dev_priv->current_page.Michel Dänzer
Always use dev_priv->sarea_priv->pf_current_page directly. This allows clients to modify it as well while they hold the HW lock, e.g. in order to sync pages between pipes.
2007-02-28i915: Fix test for synchronous flip affecting both pipes.Michel Dänzer
2007-02-22i915: Add support for scheduled buffer swaps to be done as flips.Michel Dänzer
Unfortunately, emitting asynchronous flips during vertical blank results in tearing. So we have to wait for the previous vertical blank and emit a synchronous flip.
2007-02-19i915: Improved page flipping support, including triple buffering.Michel Dänzer
Pages are tracked independently on each pipe. Bump the minor version for 3D clients to know page flipping is usable, and bump driver date.
2007-02-19i915: Unify breadcrumb emission.Michel Dänzer
2007-01-24vblank interrupt fixZou Nan hai
2007-01-02i915: Fix a DRM_ERROR that should be DRM_DEBUG.Michel Dänzer
It would clutter up the kernel output in a situation which is legitimate before X.org 7.2 and handled correctly by the 3D driver.
2006-11-27i915_vblank_tasklet: Try harder to avoid tearing.Michel Dänzer
Previously, if there were several buffer swaps scheduled for the same vertical blank, all but the first blit emitted stood a chance of exhibiting tearing. In order to avoid this, split the blits along slices of each output top to bottom.
2006-10-18Merging drm-ttm-0-2-branchThomas Hellstrom
Conflicts: linux-core/drmP.h linux-core/drm_drv.c linux-core/drm_irq.c linux-core/drm_stub.c shared-core/drm.h shared-core/i915_drv.h shared-core/i915_irq.c
2006-10-02Fix type of second argument to spin_lock_irqsave().Michel Dänzer
(cherry picked from f6238cf6244b32bd84e3d2819963d7f5473867c8 commit)
2006-10-02Fix type of second argument to spin_lock_irqsave().Michel Dänzer
2006-09-29i915: Only schedule vblank tasklet if there are scheduled swaps pending.Michel Dänzer
This fixes issues on X server startup with versions of xf86-video-intel that enable the IRQ before they have a context ID. (cherry picked from 7af93dd9849442270ec89cb4bbeef5bfd4f9e424 commit)
2006-09-29i915: Only initialize IRQ fields in postinstall, not the PIPE_SET ioctl.Michel Dänzer
Some other minor changes in preparation for actually disabling user interrupts.
2006-09-29i915: Avoid mis-counting vblank interrupts when they're only enabled for pipe A.Michel Dänzer
It looks like 'after a while', I915REG_INT_IDENTITY_R for some reason always has VSYNC_PIPEB_FLAG set in the interrupt handler, even though pipe B is disabled. So we only increase dev->vbl_received if the corresponding bit is also set in dev->vblank_pipe. (cherry picked from 881ba569929ceafd42e3c86228b0172099083d1d commit)
2006-09-29i915_vblank_swap: Add support for DRM_VBLANK_NEXTONMISS.Michel Dänzer
(cherry picked from 0356fe260dcf80f6d2d20e3384f2a1f4ee7f5b30 commit)
2006-09-29Only return EBUSY after we've established we need to schedule a new swap.Michel Dänzer
(cherry picked from 50a0284a61d4415c0ebdb02decee76ef3115007a commit)
2006-09-29Fix 'sequence has passed' condition in i915_vblank_swap().Michel Dänzer
(cherry picked from 7f09f957d9a61ac107f8fd29128d7899a3e8a228 commit)
2006-09-29Make handling of dev_priv->vblank_pipe more robust.Michel Dänzer
Initialize it to default value if it hasn't been set by the X server yet. In i915_vblank_pipe_set(), only update dev_priv->vblank_pipe and call i915_enable_interrupt() if the argument passed from userspace is valid to avoid corrupting dev_priv->vblank_pipe on invalid arguments. (cherry picked from 87c57cba1a70221fc570b253bf3b24682ef6b894 commit)
2006-09-29DRM_I915_VBLANK_SWAP ioctl: Take drm_vblank_seq_type_t instead of pipe number.Michel Dänzer
Handle relative as well as absolute target sequence numbers. Return error if target sequence has already passed, so userspace can deal with this situation as it sees fit. On success, return the sequence number of the vertical blank when the buffer swap is expected to take place. Also add DRM_IOCTL_I915_VBLANK_SWAP definition for userspace code that may want to use ioctl() instead of drmCommandWriteRead(). (cherry picked from d5a0f107511e128658e2d5e15bd7e6215c507f29 commit)
2006-09-29i915: Add ioctl for scheduling buffer swaps at vertical blanks.Michel Dänzer
This uses the core facility to schedule a driver callback that will be called ASAP after the given vertical blank interrupt with the HW lock held. (cherry picked from 257771fa290b62d4d2ad896843cf3a207978d0bb commit)
2006-09-29Add support for secondary vertical blank interrupt to i915 driver.Michel Dänzer
When the vertical blank interrupt is enabled for both pipes, pipe A is considered primary and pipe B secondary. When it's only enabled for one pipe, it's always considered primary for backwards compatibility. (cherry picked from 0c7d7f43610f705e8536a949cf2407efaa5ec217 commit)
2006-09-29i915: Only schedule vblank tasklet if there are scheduled swaps pending.Michel Dänzer
This fixes issues on X server startup with versions of xf86-video-intel that enable the IRQ before they have a context ID.
2006-09-28i915: Avoid mis-counting vblank interrupts when they're only enabled for pipe A.Michel Dänzer
It looks like 'after a while', I915REG_INT_IDENTITY_R for some reason always has VSYNC_PIPEB_FLAG set in the interrupt handler, even though pipe B is disabled. So we only increase dev->vbl_received if the corresponding bit is also set in dev->vblank_pipe.
2006-09-28i915_vblank_swap: Add support for DRM_VBLANK_NEXTONMISS.Michel Dänzer
2006-09-28Only return EBUSY after we've established we need to schedule a new swap.Michel Dänzer
2006-09-28Fix 'sequence has passed' condition in i915_vblank_swap().Michel Dänzer