summaryrefslogtreecommitdiff
path: root/shared-core/i915_irq.c
AgeCommit message (Collapse)Author
2008-07-01i915: only use tiled blits on 965+Jesse Barnes
When scheduled swaps occur, we need to blit between front & back buffers. I the buffers are tiled, we need to set the appropriate XY_SRC_COPY tile bit, only on 965 chips, since it will cause corruption on pre-965 (e.g. 945). Bug reported by and fix tested by Tomas Janousek <tomi@nomi.cz>. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-06-24i915: register definition & header file cleanupJesse Barnes
It would be nice if one day the DRM driver was the canonical source for register definitions and core macros. To that end, this patch cleans things up quite a bit, removing redundant definitions (some with different names referring to the same register) and generally tidying up the header file.
2008-05-27[FreeBSD] Add vblank-rework support and get drivers building.Robert Noland
The i915 driver now works again.
2008-04-20[I915] Handle tiled buffers in vblank taskletKeith Packard
The vblank tasklet update code must build 2D blt commands with the appropriate tiled flags.
2008-04-20On I965, use correct 3DSTATE_DRAWING_RECTANGLE command in vblankKeith Packard
The batchbuffer submission paths were fixed to use the 965-specific command, but the vblank tasklet was not. When the older version is sent, the 965 will lock up.
2008-03-08Switch from PIPE_VBLANK to PIPE_EVENT interrupts.Keith Packard
My 965GM gets interrupts stuck when using the old PIPE_VBLANK interrupt. Switch to the PIPE_EVENT interrupt mechanism, and set the PIPE*STAT registers to use START_VBLANK on 965 and VBLANK on previous chips.
2008-03-03 [i915] 2D driver may reset Frame count value, this may lead driverZou Nan hai
to leap it's vblank count a huge value. This will stall some applications that switch video mode if vblank_mode is set to a non zero value in drirc.
2008-02-13i915: Make sarea_priv setup optional.Kristian Høgsberg
2008-01-24Remove broken 'in vblank' accountingJesse Barnes
We need to return an accurate vblank count to the callers of ->get_vblank_counter, and in the Intel case the actual frame count register isn't udpated until the next active line is displayed, so we need to return one more than the frame count register if we're currently in a vblank period. However, none of the various ways of doing this is working yet, so disable the logic for now. This may result in a few missed events, but should fix the hangs some people have seen due to the current code tripping the wraparound logic in drm_update_vblank_count.
2008-01-23Fix thinko in get_vblank_counterJesse Barnes
Should use vtotal not htotal to figure out if we're in a vblank period.
2008-01-22Correct vblank count valueJesse Barnes
The frame count registers don't increment until the start of the next frame, so make sure we return an incremented count if called during the actual vblank period.
2008-01-22i915 irq fixesJesse Barnes
Ack the IRQs correctly (PIPExSTAT first followed by IIR). Don't read vblank counter registers on disabled pipes (might hang otherwise). And deal with flipped pipe/plane mappings if present.
2008-01-22Merge branch 'master' into vblank-rework, including mach64 supportJesse Barnes
Conflicts: linux-core/drmP.h linux-core/drm_drv.c shared-core/i915_drv.h shared-core/i915_irq.c shared-core/mga_irq.c shared-core/radeon_irq.c shared-core/via_irq.c Mostly trivial conflicts. mach64 support from Mathieu Bérard.
2008-01-22Revert "Fix pipe<->plane mapping vs. vblank handling (again)"Dave Airlie
This reverts commit bfc29606e4a818897eebca46a5e23bbe7bc3ce25. This regresses i915 here for me I can't get greater than 0.333 fps with gears
2008-01-03drm: cleanup DRM_DEBUG() parametersMárton Németh
As DRM_DEBUG macro already prints out the __FUNCTION__ string (see drivers/char/drm/drmP.h), it is not worth doing this again. At some other places the ending "\n" was added. airlied:- I cleaned up a few that this patch missed also
2007-12-17drm: don't cast a pointer to pointer of list_headLi Zefan
The casting is safe only when the list_head member is the first member of the structure.
2007-12-07Fix pipe<->plane mapping vs. vblank handling (again)Jesse Barnes
If drmMinor >= 6, the intel DDX driver will enable vblank events on both pipes. If drmMinor >= 10 on pre-965 chipsets, the intel DDX driver will swap the pipe<->plane mapping to allow for framebuffer compression on laptop screens. This means the secondary vblank counter (corresponding to pipe B) will be incremented when vblank interrupts occur. Now Mesa waits for vblank events on whichever plane has a greater portion of the displayed window. So it will happly ask to wait for the primary counter even though that one won't increment. So we can fix this in either the DDX driver, Mesa or the kernel (though I thought we already had several times). Since current (and previous) userspace assumes it's talking about a pipe == plane situation and now uses planes when talking to the kernel, we should probably just hide the mapping details there (indeed they already are hidden there for vblank swaps), which this patch does. So as far as userland is concerned, whether we call things planes or pipes is irrelevant, as long as kernel developers understand that userland hands them planes and they have to figure out which pipe that corresponds to (which will typically be the same on 965+ hardware and reversed on pre-965 mobile chips).
2007-12-05Remove references to the sarea_priv perf_boxes field.Kristian Høgsberg
This field isn't touched or read by any other code in the stack so it's time to retire these last few references.
2007-11-06i915: cleanup most of the whitespaceDave Airlie
2007-11-05drm: remove lots of spurious whitespace.Dave Airlie
Kernel "cleanfile" script run.
2007-10-30Merge branch 'master' into vblank-rework, fixup remaining driversJesse Barnes
Conflicts: linux-core/drmP.h linux-core/drm_drv.c linux-core/drm_irq.c shared-core/i915_drv.h shared-core/i915_irq.c shared-core/mga_drv.h shared-core/mga_irq.c shared-core/radeon_drv.h shared-core/radeon_irq.c Merge in the latest master bits and update the remaining drivers (except mach64 which math_b is working on). Also remove the 9xx hack from the i915 driver; it seems to be correct.
2007-10-14i915: fix vbl_swap allocationDave Airlie
2007-09-18i915: Reinstate check that drawable has valid information in i915_vblank_swap.Michel Dänzer
2007-09-18i915: Fix scheduled buffer swaps.Michel Dänzer
One instance of unlocking a spinlock was converted incorrectly when this code was fixed to build on BSD.
2007-09-12Remove plane->pipe mapping from SAREA private after allJesse Barnes
We can figure out which pipe a given plane is mapped to by looking at the display control registers instead of tracking it in a new SAREA private field. If this becomes a performance problem, we could move to an ioctl based solution by adding a new parameter for the DDX to set (defaulting to the old behavior if the param was never set of course).
2007-09-11Disambiguate planes & pipes for swap operationsJesse Barnes
This mod makes the SAREA track plane to pipe mappings and corrects the name of the plane info variables (they were mislabeled as pipe info since until now all code assumed a direct mapping between planes and pipes). It also updates the flip ioctl argument to take a set of planes rather than pipes, since planes are flipped while pipes generate vblank events.
2007-07-20Replace DRM_IOCTL_ARGS with (dev, data, file_priv) and remove DRM_DEVICE.Eric Anholt
The data is now in kernel space, copied in/out as appropriate according to the This results in DRM_COPY_{TO,FROM}_USER going away, and error paths to deal with those failures. This also means that XFree86 4.2.0 support for i810 DRM is lost.
2007-07-20Replace filp in ioctl arguments with drm_file *file_priv.Eric Anholt
As a fallout, replace filp storage with file_priv storage for "unique identifier of a client" all over the DRM. There is a 1:1 mapping, so this should be a noop. This could be a minor performance improvement, as everything on Linux dereferenced filp to get file_priv anyway, while only the mmap ioctls went the other direction.
2007-07-20Remove DRM_ERR OS macro.Eric Anholt
This was used to make all ioctl handlers return -errno on linux and errno on *BSD. Instead, just return -errno in shared code, and flip sign on return from shared code to *BSD code.
2007-07-19Merge branch 'origin'Eric Anholt
2007-07-18Add dry-coded DRM drawable private information storage for FreeBSD.Eric Anholt
With this, all modules build again.
2007-07-16drm: remove drmP.h internal typedefsDave Airlie
2007-07-16drm: detypedef drm.h and fixup all problemsDave Airlie
2007-07-03One more spinlock initializer cleanup.Michel Dänzer
2007-06-22more vblank reworkJesse Barnes
- use a timer for disabling vblank events to avoid enable/disable calls too often - make i915 work with pre-965 chips again (would like to structure this better, but this hack works on my test system)
2007-06-18Remove broken CRTC enable checks and incorrect user irq enable in set_pipeJesse Barnes
routine.
2007-06-15Wake up vblank waitqueue in drm_handle_vblank().Michel Dänzer
2007-06-15i915: Fix tests for vblank interrupts being enabled on CRTC by X server.Michel Dänzer
2007-06-15Fix memory leaks in vblank error paths.Michel Dänzer
Also use drm_calloc instead of drm_alloc and memset, and use the size of the struct instead of the size of the pointer for allocation...
2007-06-14Comment new vblank routines and fixup several issues:Jesse Barnes
- use correct refcount variable in get/put routines - extract counter update from drm_vblank_get - make signal handling callback per-crtc - update interrupt handling logic, drivers should use drm_handle_vblank - move wakeup and counter update logic to new drm_handle_vblank routine - fixup usage of get/put in light of counter update extraction - fix longstanding bug in signal code, update pending counter only *after* we're sure we'll setup signal handling
2007-06-12Remove unnecessary (and uncommented!) read barrier from the interruptJesse Barnes
path. It doesn't appear to serve any useful purpose.
2007-06-12Update vblank code:Jesse Barnes
- move pre/post modeset ioctl to core - fixup i915 buffer swap - fix outstanding signal count code - create new core vblank init routine - test (works with glxgears) - simplify i915 interrupt handler
2007-06-12Initial checkin of vblank rework. Code attempts to reduce the numberJesse Barnes
of vblank interrupt in order to save power.
2007-06-03Revert "move i915 to new drm_wait_on function"root
This reverts commit feb68037784ac09e333a321d294fdb2d8c57a4c8. This was a bad idea, the macro is actually a bit harder to convert to a static for the other use cases
2007-05-26drm: spinlock initializer cleanupThomas Gleixner
2007-05-10Allow vblank interrupts to remain disabled across VT switch.Keith Packard
i915_driver_irq_postinstall was forcing vblank interrupts to pipe A when called with vblank interrupts disabled. This caused vblank interrupts to be accidentally re-enabled when VT switching the X server. Instead, start the driver with vblank interrupts enabled on pipe A to support older X servers, but then leave control over the state to the X server if it is able to do so.
2007-04-28move i915 to new drm_wait_on functionDave Airlie
2007-04-03Make sure we ack irqs before we read a breadcrumb so thatThomas Hellstrom
breadcrumb updates that occur _AFTER_ we've read the breadcrumb really generates a new IRQ.
2007-02-28i915: Eliminate dev_priv->current_page.Michel Dänzer
Always use dev_priv->sarea_priv->pf_current_page directly. This allows clients to modify it as well while they hold the HW lock, e.g. in order to sync pages between pipes.
2007-02-28i915: Fix test for synchronous flip affecting both pipes.Michel Dänzer