| Age | Commit message (Collapse) | Author |
|---|
|
If drmMinor >= 6, the intel DDX driver will enable vblank events on both
pipes. If drmMinor >= 10 on pre-965 chipsets, the intel DDX driver will
swap the pipe<->plane mapping to allow for framebuffer compression on
laptop screens. This means the secondary vblank counter (corresponding
to pipe B) will be incremented when vblank interrupts occur.
Now Mesa waits for vblank events on whichever plane has a greater
portion of the displayed window. So it will happly ask to wait for the
primary counter even though that one won't increment.
So we can fix this in either the DDX driver, Mesa or the kernel (though
I thought we already had several times).
Since current (and previous) userspace assumes it's talking about a pipe
== plane situation and now uses planes when talking to the kernel, we
should probably just hide the mapping details there (indeed they already
are hidden there for vblank swaps), which this patch does.
So as far as userland is concerned, whether we call things planes or
pipes is irrelevant, as long as kernel developers understand that
userland hands them planes and they have to figure out which pipe that
corresponds to (which will typically be the same on 965+ hardware and
reversed on pre-965 mobile chips).
|
|
This field isn't touched or read by any other code in the stack so it's
time to retire these last few references.
|
|
|
|
Kernel "cleanfile" script run.
|
|
|
|
|
|
One instance of unlocking a spinlock was converted incorrectly when this code
was fixed to build on BSD.
|
|
We can figure out which pipe a given plane is mapped to by looking at the
display control registers instead of tracking it in a new SAREA private field.
If this becomes a performance problem, we could move to an ioctl based solution
by adding a new parameter for the DDX to set (defaulting to the old behavior if
the param was never set of course).
|
|
This mod makes the SAREA track plane to pipe mappings and corrects the name of
the plane info variables (they were mislabeled as pipe info since until now all
code assumed a direct mapping between planes and pipes).
It also updates the flip ioctl argument to take a set of planes rather than
pipes, since planes are flipped while pipes generate vblank events.
|
|
The data is now in kernel space, copied in/out as appropriate according to the
This results in DRM_COPY_{TO,FROM}_USER going away, and error paths to deal
with those failures. This also means that XFree86 4.2.0 support for i810 DRM
is lost.
|
|
As a fallout, replace filp storage with file_priv storage for "unique
identifier of a client" all over the DRM. There is a 1:1 mapping, so this
should be a noop. This could be a minor performance improvement, as everything
on Linux dereferenced filp to get file_priv anyway, while only the mmap ioctls
went the other direction.
|
|
This was used to make all ioctl handlers return -errno on linux and errno on
*BSD. Instead, just return -errno in shared code, and flip sign on return from
shared code to *BSD code.
|
|
|
|
With this, all modules build again.
|
|
|
|
|
|
|
|
This reverts commit feb68037784ac09e333a321d294fdb2d8c57a4c8.
This was a bad idea, the macro is actually a bit harder to convert
to a static for the other use cases
|
|
|
|
i915_driver_irq_postinstall was forcing vblank interrupts to pipe A when
called with vblank interrupts disabled. This caused vblank interrupts to be
accidentally re-enabled when VT switching the X server. Instead, start the
driver with vblank interrupts enabled on pipe A to support older X servers,
but then leave control over the state to the X server if it is able to do so.
|
|
|
|
breadcrumb updates that occur _AFTER_ we've read the breadcrumb really
generates a new IRQ.
|
|
Always use dev_priv->sarea_priv->pf_current_page directly. This allows clients
to modify it as well while they hold the HW lock, e.g. in order to sync pages
between pipes.
|
|
|
|
Unfortunately, emitting asynchronous flips during vertical blank results in
tearing. So we have to wait for the previous vertical blank and emit a
synchronous flip.
|
|
Pages are tracked independently on each pipe.
Bump the minor version for 3D clients to know page flipping is usable, and
bump driver date.
|
|
|
|
|
|
It would clutter up the kernel output in a situation which is legitimate before
X.org 7.2 and handled correctly by the 3D driver.
|
|
Previously, if there were several buffer swaps scheduled for the same vertical
blank, all but the first blit emitted stood a chance of exhibiting tearing. In
order to avoid this, split the blits along slices of each output top to bottom.
|
|
Conflicts:
linux-core/drmP.h
linux-core/drm_drv.c
linux-core/drm_irq.c
linux-core/drm_stub.c
shared-core/drm.h
shared-core/i915_drv.h
shared-core/i915_irq.c
|
|
(cherry picked from f6238cf6244b32bd84e3d2819963d7f5473867c8 commit)
|
|
|
|
This fixes issues on X server startup with versions of xf86-video-intel that
enable the IRQ before they have a context ID.
(cherry picked from 7af93dd9849442270ec89cb4bbeef5bfd4f9e424 commit)
|
|
Some other minor changes in preparation for actually disabling user interrupts.
|
|
It looks like 'after a while', I915REG_INT_IDENTITY_R for some reason always has
VSYNC_PIPEB_FLAG set in the interrupt handler, even though pipe B is disabled.
So we only increase dev->vbl_received if the corresponding bit is also set in
dev->vblank_pipe.
(cherry picked from 881ba569929ceafd42e3c86228b0172099083d1d commit)
|
|
(cherry picked from 0356fe260dcf80f6d2d20e3384f2a1f4ee7f5b30 commit)
|
|
(cherry picked from 50a0284a61d4415c0ebdb02decee76ef3115007a commit)
|
|
(cherry picked from 7f09f957d9a61ac107f8fd29128d7899a3e8a228 commit)
|
|
Initialize it to default value if it hasn't been set by the X server yet.
In i915_vblank_pipe_set(), only update dev_priv->vblank_pipe and call
i915_enable_interrupt() if the argument passed from userspace is valid to avoid
corrupting dev_priv->vblank_pipe on invalid arguments.
(cherry picked from 87c57cba1a70221fc570b253bf3b24682ef6b894 commit)
|
|
Handle relative as well as absolute target sequence numbers.
Return error if target sequence has already passed, so userspace can deal with
this situation as it sees fit.
On success, return the sequence number of the vertical blank when the buffer
swap is expected to take place.
Also add DRM_IOCTL_I915_VBLANK_SWAP definition for userspace code that may want
to use ioctl() instead of drmCommandWriteRead().
(cherry picked from d5a0f107511e128658e2d5e15bd7e6215c507f29 commit)
|
|
This uses the core facility to schedule a driver callback that will be called
ASAP after the given vertical blank interrupt with the HW lock held.
(cherry picked from 257771fa290b62d4d2ad896843cf3a207978d0bb commit)
|
|
When the vertical blank interrupt is enabled for both pipes, pipe A is
considered primary and pipe B secondary. When it's only enabled for one pipe,
it's always considered primary for backwards compatibility.
(cherry picked from 0c7d7f43610f705e8536a949cf2407efaa5ec217 commit)
|
|
This fixes issues on X server startup with versions of xf86-video-intel that
enable the IRQ before they have a context ID.
|
|
It looks like 'after a while', I915REG_INT_IDENTITY_R for some reason always has
VSYNC_PIPEB_FLAG set in the interrupt handler, even though pipe B is disabled.
So we only increase dev->vbl_received if the corresponding bit is also set in
dev->vblank_pipe.
|
|
|
|
|
|
|
|
Initialize it to default value if it hasn't been set by the X server yet.
In i915_vblank_pipe_set(), only update dev_priv->vblank_pipe and call
i915_enable_interrupt() if the argument passed from userspace is valid to avoid
corrupting dev_priv->vblank_pipe on invalid arguments.
|
|
Handle relative as well as absolute target sequence numbers.
Return error if target sequence has already passed, so userspace can deal with
this situation as it sees fit.
On success, return the sequence number of the vertical blank when the buffer
swap is expected to take place.
Also add DRM_IOCTL_I915_VBLANK_SWAP definition for userspace code that may want
to use ioctl() instead of drmCommandWriteRead().
|
