| Age | Commit message (Collapse) | Author |
|---|
|
|
|
Okay we have crtc, encoder and connectors.
No more outputs exposed beyond driver internals
I've broken intel tv connector stuff.
Really for TV we should have one TV connector, with a sub property for the
type of signal been driven over it
|
|
Use subclassing from the drivers to allocate the objects. This saves
two objects being allocated for each crtc/output and generally makes
exit paths cleaner.
|
|
This splits a lot of the core modesetting code out into a file of
helper functions, that are only called from themselves and/or the driver.
The driver gets called into more often or can call these functions from itself
if it is a helper using driver.
I've broken framebuffer resize doing this but I didn't like the API for that
in any case.
|
|
modesetting-101
Conflicts:
shared-core/i915_dma.c
shared-core/i915_drv.h
|
|
The i915 driver now works again.
|
|
It would be nice if one day the DRM driver was the canonical source for
register definitions and core macros. To that end, this patch cleans
things up quite a bit, removing redundant definitions (some with
different names referring to the same register) and generally tidying up
the header file.
|
|
In order to avoid recursive ->detect->interrupt->detect->interrupt->...
we need to disable TV hotplug interrupts in
intel_tv.c:intel_tv_detect_type. We also need to enable the TV interrupt
detection and hotplug sequence properly in i915_irq.c.
|
|
This reverts commit 2a78ad22647933aa8842d534bce6495ff93fbf76.
|
|
patch from F9 tree
|
|
Conflicts:
linux-core/Makefile.kernel
linux-core/drm_compat.c
linux-core/drm_fops.c
linux-core/drm_lock.c
shared-core/drm.h
shared-core/i915_dma.c
shared-core/i915_drv.h
shared-core/i915_irq.c
|
|
On my 865G machine, it seems the CPU will receive interrupt before
irq_postinstall is called. This will cause kernel oops because vblank is not
inited at that time. Clear interrupt status before install seems fixing this
problem.
Signed-off-by: Hong Liu <hong.liu@intel.com>
|
|
The vblank tasklet update code must build 2D blt commands with the
appropriate tiled flags.
|
|
The batchbuffer submission paths were fixed to use the 965-specific command,
but the vblank tasklet was not. When the older version is sent, the 965 will
lock up.
|
|
Doesn't yet work on my i915 test machine, but most of the necessary bits
should be there.
|
|
modesetting-101
Conflicts:
shared-core/i915_dma.c
shared-core/i915_drv.h
shared-core/i915_irq.c
|
|
they are not pipe A specific. Remove pipe B code.
|
|
Also adjust i915 irq handling as it follows the 16bit'ism's
of the i8xx series.
|
|
My 965GM gets interrupts stuck when using the old PIPE_VBLANK interrupt.
Switch to the PIPE_EVENT interrupt mechanism, and set the PIPE*STAT
registers to use START_VBLANK on 965 and VBLANK on previous chips.
|
|
Conflicts:
linux-core/drm_compat.c
|
|
to leap it's vblank count a huge value.
This will stall some applications that switch video mode if vblank_mode is set to a non zero value in drirc.
|
|
|
|
|
|
|
|
|
|
Conflicts:
linux-core/drm_bo.c
linux-core/drm_drv.c
shared-core/drm.h
shared-core/i915_dma.c
shared-core/i915_drv.h
shared-core/i915_irq.c
shared-core/radeon_irq.c
|
|
We need to return an accurate vblank count to the callers of
->get_vblank_counter, and in the Intel case the actual frame count
register isn't udpated until the next active line is displayed, so we
need to return one more than the frame count register if we're currently
in a vblank period.
However, none of the various ways of doing this is working yet, so
disable the logic for now. This may result in a few missed events, but
should fix the hangs some people have seen due to the current code
tripping the wraparound logic in drm_update_vblank_count.
|
|
Should use vtotal not htotal to figure out if we're in a vblank period.
|
|
The frame count registers don't increment until the start of the next
frame, so make sure we return an incremented count if called during the
actual vblank period.
|
|
Ack the IRQs correctly (PIPExSTAT first followed by IIR). Don't read
vblank counter registers on disabled pipes (might hang otherwise). And
deal with flipped pipe/plane mappings if present.
|
|
Conflicts:
linux-core/drmP.h
linux-core/drm_drv.c
shared-core/i915_drv.h
shared-core/i915_irq.c
shared-core/mga_irq.c
shared-core/radeon_irq.c
shared-core/via_irq.c
Mostly trivial conflicts.
mach64 support from Mathieu Bérard.
|
|
This reverts commit bfc29606e4a818897eebca46a5e23bbe7bc3ce25.
This regresses i915 here for me I can't get greater than 0.333 fps with gears
|
|
As DRM_DEBUG macro already prints out the __FUNCTION__ string (see
drivers/char/drm/drmP.h), it is not worth doing this again. At some
other places the ending "\n" was added.
airlied:- I cleaned up a few that this patch missed also
|
|
|
|
|
|
The casting is safe only when the list_head member is the first member of
the structure.
|
|
modesetting-101
Conflicts:
linux-core/drm_drv.c
shared-core/drm.h
shared-core/i915_dma.c
|
|
If drmMinor >= 6, the intel DDX driver will enable vblank events on both
pipes. If drmMinor >= 10 on pre-965 chipsets, the intel DDX driver will
swap the pipe<->plane mapping to allow for framebuffer compression on
laptop screens. This means the secondary vblank counter (corresponding
to pipe B) will be incremented when vblank interrupts occur.
Now Mesa waits for vblank events on whichever plane has a greater
portion of the displayed window. So it will happly ask to wait for the
primary counter even though that one won't increment.
So we can fix this in either the DDX driver, Mesa or the kernel (though
I thought we already had several times).
Since current (and previous) userspace assumes it's talking about a pipe
== plane situation and now uses planes when talking to the kernel, we
should probably just hide the mapping details there (indeed they already
are hidden there for vblank swaps), which this patch does.
So as far as userland is concerned, whether we call things planes or
pipes is irrelevant, as long as kernel developers understand that
userland hands them planes and they have to figure out which pipe that
corresponds to (which will typically be the same on 965+ hardware and
reversed on pre-965 mobile chips).
|
|
This field isn't touched or read by any other code in the stack so it's
time to retire these last few references.
|
|
modesetting-101
Conflicts:
linux-core/Makefile.kernel
shared-core/i915_dma.c
shared-core/i915_drv.h
shared-core/i915_irq.c
|
|
|
|
Conflicts:
linux-core/drm_bufs.c
shared-core/i915_dma.c
shared-core/i915_drv.h
shared-core/i915_irq.c
|
|
Kernel "cleanfile" script run.
|
|
Conflicts:
linux-core/drmP.h
linux-core/drm_drv.c
linux-core/drm_irq.c
shared-core/i915_drv.h
shared-core/i915_irq.c
shared-core/mga_drv.h
shared-core/mga_irq.c
shared-core/radeon_drv.h
shared-core/radeon_irq.c
Merge in the latest master bits and update the remaining drivers (except
mach64 which math_b is working on). Also remove the 9xx hack from the i915
driver; it seems to be correct.
|
|
modesetting-101
Conflicts:
linux-core/drm_bo.c
linux-core/drm_objects.h
shared-core/i915_dma.c
shared-core/i915_drv.h
|
|
|
|
Conflicts:
linux-core/drmP.h
linux-core/drm_bo.c
linux-core/drm_drv.c
linux-core/drm_objects.h
shared-core/drm.h
shared-core/i915_dma.c
shared-core/i915_drv.h
shared-core/i915_irq.c
Mostly removing typedefs that snuck into the modesetting code and
updating to the latest TTM APIs. As of today, the i915 driver builds,
but there are likely to be problems, so debugging and bugfixes will
come next.
|
|
|
|
One instance of unlocking a spinlock was converted incorrectly when this code
was fixed to build on BSD.
|
|
We can figure out which pipe a given plane is mapped to by looking at the
display control registers instead of tracking it in a new SAREA private field.
If this becomes a performance problem, we could move to an ioctl based solution
by adding a new parameter for the DDX to set (defaulting to the old behavior if
the param was never set of course).
|
