| Age | Commit message (Collapse) | Author |
|---|
|
|
|
This still isn't perfect but it fixes a few oopses and cleans up
some of the tabs and bugs in the original fb limit code
|
|
Originally from Jakob, cleaned up by airlied.
|
|
|
|
|
|
This is required to use TTM to allocate the ring buffer.
|
|
|
|
|
|
(Fence objects belonging to different command submission mechanisms).
|
|
|
|
|
|
The MI_WAIT_FOR_EVENT instruction does not support waiting for several events
at once, so this should fix the lockups with page flipping when both pipes are
enabled.
|
|
Always use dev_priv->sarea_priv->pf_current_page directly. This allows clients
to modify it as well while they hold the HW lock, e.g. in order to sync pages
between pipes.
|
|
|
|
The assumption is that synchronous flips are not isolated usually, and waiting
for all of them could result in stalling the pipeline for long periods of time.
Also use i915_emit_mi_flush() instead of an old-fashioned way to achieve the
same effect.
|
|
Unfortunately, emitting asynchronous flips during vertical blank results in
tearing. So we have to wait for the previous vertical blank and emit a
synchronous flip.
|
|
Pages are tracked independently on each pipe.
Bump the minor version for 3D clients to know page flipping is usable, and
bump driver date.
|
|
Leave it to the client to wait for the flip to complete when necessary,
but wait for a previous flip to complete before emitting another one. This
should help avoid unnecessary stalling of the ring due to pending flips.
Call i915_do_cleanup_pageflip() unconditionally in preclose.
|
|
|
|
|
|
This means the loop will wait up to ~10ms for ring buffer space to become
available, rather than just however long it takes to check the space 10000
times. This matches other drivers' behavior when waiting for ring buffer/fifo
space.
|
|
This adds a new ioctl for passing counter information from the chip back to
applications, these counters include the data needed to perform OC.
|
|
|
|
Conflicts:
linux-core/drmP.h
linux-core/drm_drv.c
linux-core/drm_irq.c
linux-core/drm_stub.c
shared-core/drm.h
shared-core/i915_drv.h
shared-core/i915_irq.c
|
|
Fix up init and destruction code.
|
|
This uses the core facility to schedule a driver callback that will be called
ASAP after the given vertical blank interrupt with the HW lock held.
(cherry picked from 257771fa290b62d4d2ad896843cf3a207978d0bb commit)
|
|
This uses the core facility to schedule a driver callback that will be called
ASAP after the given vertical blank interrupt with the HW lock held.
|
|
This helps us unbreak FreeBSD DRM from the 965 changes.
|
|
|
|
|
|
|
|
0x00 EXE fence. Signals when command stream interpreter has reached the point
where the fence was emitted.
0x01 FLUSH fence. Signals when command stream interpreter has reached the point
where the fence was emitted, and all previous drawing operations have been
completed and flushed.
Implements busy wait (for fastest response time / high CPU) and
lazy wait (User interrupt or timer driven).
|
|
smack my whitespace up.
|
|
This is a patch prepared by Guangdeng Liao based off of Tungsten Graphics's
final code drop.
|
|
i915 vblanks can be generated from either pipe a or b, however a disabled
pipe generates no interrupts. This change allows the X server to select
which pipe generates vblank interrupts.
|
|
|
|
reverted.
|
|
(Tungsten Graphics)
|
|
|
|
that particular file. Its contents have changed a good bit since the
original sis code, and the original sis code didn't care much about
attribution since it routinely disclaims Precision Insight/VA Linux
from responsibility. Also, adjust formatting around license headers
(have a comment open immediately before the "Copyright" line, not as a
runon of any previous comments) for automatic processing into FreeBSD,
where /*- is used to signal the beginning of license headers for
automatic compilation of license lists.
|
|
|
|
understandable: preinit -> load postinit -> (removed) presetup ->
firstopen postsetup -> (removed) open_helper -> open prerelease ->
preclose free_filp_priv -> postclose pretakedown -> lastclose
postcleanup -> unload release -> reclaim_buffers_locked version ->
(removed)
postinit and version were replaced with generic code in the Linux DRM
(drivers now set their version numbers and description in the driver
structure, like on BSD). postsetup wasn't used at all. Fixes the savage
hooks for initializing and tearing down mappings at the right times.
Testing involved at least starting X, running glxgears, killing
glxgears, exiting X, and repeating.
Tested on: FreeBSD (g200, g400, r200, r128) Linux (r200, savage4)
|
|
needing root.
|
|
|
|
that a device absolutely is, absolutely is not, or may or may not be
AGP. Modify the i915 DRM to use this to force all i9x5 devices to be
"AGP" (even the PCI-e devices).
Reported by: Lukas Hejtmanek
|
|
with IOMMUs and such. There is one usage of the forbidden vtophys()
left in drm_scatter.c which will be fixed up soon. This required a KPI
change for drm_pci_alloc/free() to return/use a drm_dma_handle_t that
keeps track of os-specific bits, rather than just passing around the
vaddr/busaddr/size.
Submitted by: Tonnerre Lombard (partially) Tested on: FreeBSD: Rage128
AGP/PCI Linux: Savage4 AGP/PCI
|
|
|
|
Bump to 1.2
|
|
|
|
code. Remove the "drv" from sisdrv, as it's unnecessary. Use the
drm_pci functions in i915 instead of per-os implementations of the
same. Avoid whitespace within fields in drm_pciids.txt (one of the r300
definitions), since it breaks the bsd pciids script. Tested on sis,
mga, r128. i915 needs more work.
|
