| Age | Commit message (Collapse) | Author |
|---|
|
modesetting-101
Conflicts:
shared-core/i915_dma.c
|
|
places).
Add new FB hooks to the drm driver structure and make i915 use them for an
Intel specific FB driver. This will allow acceleration and better handling
of the command stream.
|
|
i915_driver_irq_postinstall was forcing vblank interrupts to pipe A when
called with vblank interrupts disabled. This caused vblank interrupts to be
accidentally re-enabled when VT switching the X server. Instead, start the
driver with vblank interrupts enabled on pipe A to support older X servers,
but then leave control over the state to the X server if it is able to do so.
|
|
|
|
We need to keep a list of user created fbs to nuke on master exit.
We also need to use the bo properly.
|
|
When the kernel driver is loaded it sets up a lot of stuff..
it tears down the same stuff on unload.
This add a new map type called DRM_DRIVER which means the driver will clean the mapping up
and fix up the map cleaner
|
|
|
|
|
|
into origin/modesetting-101
Conflicts:
linux-core/drm_crtc.c - trivial merge
linux-core/drm_crtc.h - trivial merge
linux-core/intel_display.c - crtc_config -> mode_config
shared-core/i915_dma.c - accommodate new init code in i915_init.c
|
|
init routine that runs at driver load time.
|
|
|
|
This still isn't perfect but it fixes a few oopses and cleans up
some of the tabs and bugs in the original fb limit code
|
|
Originally from Jakob, cleaned up by airlied.
|
|
|
|
|
|
|
|
This is required to use TTM to allocate the ring buffer.
|
|
|
|
|
|
(Fence objects belonging to different command submission mechanisms).
|
|
|
|
|
|
The MI_WAIT_FOR_EVENT instruction does not support waiting for several events
at once, so this should fix the lockups with page flipping when both pipes are
enabled.
|
|
Always use dev_priv->sarea_priv->pf_current_page directly. This allows clients
to modify it as well while they hold the HW lock, e.g. in order to sync pages
between pipes.
|
|
|
|
The assumption is that synchronous flips are not isolated usually, and waiting
for all of them could result in stalling the pipeline for long periods of time.
Also use i915_emit_mi_flush() instead of an old-fashioned way to achieve the
same effect.
|
|
Unfortunately, emitting asynchronous flips during vertical blank results in
tearing. So we have to wait for the previous vertical blank and emit a
synchronous flip.
|
|
Pages are tracked independently on each pipe.
Bump the minor version for 3D clients to know page flipping is usable, and
bump driver date.
|
|
Leave it to the client to wait for the flip to complete when necessary,
but wait for a previous flip to complete before emitting another one. This
should help avoid unnecessary stalling of the ring due to pending flips.
Call i915_do_cleanup_pageflip() unconditionally in preclose.
|
|
|
|
|
|
This means the loop will wait up to ~10ms for ring buffer space to become
available, rather than just however long it takes to check the space 10000
times. This matches other drivers' behavior when waiting for ring buffer/fifo
space.
|
|
This adds a new ioctl for passing counter information from the chip back to
applications, these counters include the data needed to perform OC.
|
|
|
|
Conflicts:
linux-core/drmP.h
linux-core/drm_drv.c
linux-core/drm_irq.c
linux-core/drm_stub.c
shared-core/drm.h
shared-core/i915_drv.h
shared-core/i915_irq.c
|
|
Fix up init and destruction code.
|
|
This uses the core facility to schedule a driver callback that will be called
ASAP after the given vertical blank interrupt with the HW lock held.
(cherry picked from 257771fa290b62d4d2ad896843cf3a207978d0bb commit)
|
|
This uses the core facility to schedule a driver callback that will be called
ASAP after the given vertical blank interrupt with the HW lock held.
|
|
This helps us unbreak FreeBSD DRM from the 965 changes.
|
|
|
|
|
|
|
|
0x00 EXE fence. Signals when command stream interpreter has reached the point
where the fence was emitted.
0x01 FLUSH fence. Signals when command stream interpreter has reached the point
where the fence was emitted, and all previous drawing operations have been
completed and flushed.
Implements busy wait (for fastest response time / high CPU) and
lazy wait (User interrupt or timer driven).
|
|
smack my whitespace up.
|
|
This is a patch prepared by Guangdeng Liao based off of Tungsten Graphics's
final code drop.
|
|
i915 vblanks can be generated from either pipe a or b, however a disabled
pipe generates no interrupts. This change allows the X server to select
which pipe generates vblank interrupts.
|
|
|
|
reverted.
|
|
(Tungsten Graphics)
|
|
|
