summaryrefslogtreecommitdiff
path: root/shared-core/i915_dma.c
AgeCommit message (Collapse)Author
2008-10-27i915: Since FreeBSD doesn't have gem support yet, don't advertise it.Robert Noland
This allows us to not crash X when using newer Intel ddx drivers.
2008-10-25drm/i915: fix ioremap of a user address for non-root (CVE-2008-3831)Matthias Hopf
Olaf Kirch noticed that the i915_set_status_page() function of the i915 kernel driver calls ioremap with an address offset that is supplied by userspace via ioctl. The function zeroes the mapped memory via memset and tells the hardware about the address. Turns out that access to that ioctl is not restricted to root so users could probably exploit that to do nasty things. We haven't tried to write actual exploit code though. It only affects the Intel G33 series and newer.
2008-09-06[FreeBSD] Ensure that drm_pci_alloc is never called while locks are held.Robert Noland
2008-09-05i915: fix i915_ring_validate()Robert Noland
2008-08-24i915: Fix i915 build on FreeBSDRobert Noland
ifdef out all the gem stuff for now. Also, the msi stuff isn't portable the way it is... I'll try and fix that up sometime soon.
2008-08-24i915: Clear sarea_priv during lastclose.Robert Noland
sarea_priv needs to be NULL before i915_initialized is called to properly reset it. The stale value produces a panic any time something opens/closes drm without calling initialize. i.e. version checking
2008-08-24i915: Free dev->dev_private on unload.Robert Noland
2008-08-24i915: Move spinlock init / destroy to load / unload time.Robert Noland
This resolves the panic on FreeBSD during VT switch, without attempting any of the more lofty goals for the time being.
2008-08-08Merge branch 'drm-gem'Eric Anholt
Conflicts: shared-core/i915_dma.c This brings in kernel support and userland interface for intel GEM.
2008-08-01Revert "i915: Move all of the irq install/uninstall to load time."Dave Airlie
This reverts commit 965a72202b439068e62ac341990f51953457b202. Please re-do over properly
2008-07-30intel-gem: Replace version bump signalling GEM with I915_PARAM_HAS_GEM.Eric Anholt
2008-07-30i915: add version checks for opregion on old kernelsDave Airlie
2008-07-28Merge commit 'origin/master' into drm-gemEric Anholt
Conflicts: linux-core/Makefile.kernel shared-core/i915_dma.c shared-core/i915_drv.h shared-core/i915_irq.c
2008-07-23i915: Move all of the irq install/uninstall to load time.Robert Noland
This resolves a panic on FreeBSD which was caused by trying to re-initialize the swap lock. It's just much easier to initialize all of the locks at load time. It should also ensure that the vblank structures are available earlier.
2008-07-15This is a modified version of Hong's patch from last month, with a fewHong Liu
modifications to make it work correctly on my test hardware (altered the backlight write function, made it enable the legacy backlight controller interrupts on mobile hardware, sorted the interrupt function so we don't get an excessive number of vblank interrupts). This lets the backlight keys on my T61 work properly, though there's a 750msec or so delay between the request and the brightness actually changing - this sounds awfully like the hardware spinning waiting for a status flag to become ready, but as far as I can tell they're all set correctly. If anyone can figure out what's wrong here, it'd be nice to know. Some of the functions are still stubs and just tell the hardware that the request was successful. These can be filled in as kernel modesetting gets integrated. I think it's worth getting this in anyway, since it's required for backlight control to work properly on some new platforms. Signed-off-by: Matthew Garrett <mjg@redhat.com>
2008-07-11intel-gem: Add two new ioctls for managing tiling on objects.Eric Anholt
Various chips have exciting interactions between the CPU and the GPU's different ways of accessing interleaved memory, so we need some kernel assistance in determining how it works. Only fully tested on GM965 so far.
2008-06-24i915: register definition & header file cleanupJesse Barnes
It would be nice if one day the DRM driver was the canonical source for register definitions and core macros. To that end, this patch cleans things up quite a bit, removing redundant definitions (some with different names referring to the same register) and generally tidying up the header file.
2008-06-20[intel-gem] Add DRM_IOCTL_I915_GEM_SW_FINISH to flag CPU writesKeith Packard
When a software fallback has completed, usermode must notify the kernel so that any scanout buffers can be synchronized. This ioctl should be called whenever a fallback completes to flush CPU and chipset caches.
2008-06-16[linux] Use the device's irq for handler setup instead of stale dev->irq.Eric Anholt
This fixes registration when MSI is set up after the stub function fills in dev->irq. Otherwise /proc/interrupts would report attachment to the fasteoi interrupt. dev->irq is still exposed (and updated at IRQ setup) for the drivers that use it for whatever reason.
2008-06-13[intel-gem] throttle based on frames rather than time. Reduces jitter.Keith Packard
Record the last execbuffer sequence for each client. Record that sequence in the throttle ioctl as the 'throttle sequence'. Wait for the last throttle sequence in the throttle ioctl.
2008-06-13[intel-gem] Use a delayed_work instead of a timer + work_structKeith Packard
We want request retirement to occur about once a second when the request queue is non-empty. This was done with a timer that queued a work_struct, using a delayed_work instead makes a lot more sense.
2008-06-13[gem] Remove the interrupt handler for retiring requests.Eric Anholt
This was insufficient once we started masking interrupts to only when someone was waiting for them (and would thus retire requests themselves). It was replaced by the retire_timer.
2008-06-11[gem] Move potentially device-specific ioctls to the intel driver.Eric Anholt
This is the create (may want location flags), pread/pwrite/mmap (performance tuning hints), and set_domain (will 32 bits be enough for everyone?) ioctls. Left in the generic set are just flink/open/close. The 2D driver must be updated for this change, and API but not ABI is broken for 3D. The driver version is bumped to mark this.
2008-06-10[gem] Manage the ringbuffer from the kernel in the GEM case.Eric Anholt
This requires that the X Server use the execbuf interface for buffer submission, as it no longer has direct access to the ring. This is therefore a flag day for the gem interface. This also adds enter/leavevt ioctls for use by the X Server. These would get stubbed out in a modesetting implementation, but are required while in an environment where the device's state is only managed by the DRM while X has the VT.
2008-06-08I915 suspend/resume for FreeBSDRobert Noland
2008-06-06[intel] remove settable use_mi_batchbuffer_startKeith Packard
The driver can know what hardware requires MI_BATCH_BUFFER vs MI_BATCH_BUFFER_START; there's no reason to let user mode configure this.
2008-06-06[intel-gem] Use timers to retire requests periodically.Keith Packard
Without the user IRQ running constantly, there's no wakeup when the ring empties to go retire requests and free buffers. Use a 1 second timer to make that happen more often.
2008-06-06[intel] free the hardware status page at driver_unloadKeith Packard
This goes with the other hardware status page patch.
2008-06-06[intel-gem] Add explicit throttle ioctlKeith Packard
Instead of throttling and execbuffer time, have the application ask to throttle explicitly. This allows the throttle to happen less often, and without holding the DRM lock.
2008-06-06[intel] Allocate hardware status page at driver load timeKeith Packard
I couldn't get the re-allocated HWS to work on my 965GM, so I just gave up and made it persist across the lifetime of the driver instead.
2008-06-06Ignore X server provided mmio addressKeith Packard
2008-05-30Merge commit 'origin/master' into drm-gemEric Anholt
Conflicts: linux-core/Makefile.kernel shared-core/i915_drv.h shared-core/nouveau_state.c
2008-05-27[FreeBSD] Add vblank-rework support and get drivers building.Robert Noland
The i915 driver now works again.
2008-05-25[intel-gem] Add DRM_I915_GEM_BUSY ioctl to check for idle buffers.Keith Packard
This new ioctl returns whether re-using the buffer would force a wait.
2008-05-22[intel] Add debug code to verify the cached ring tail pointer.Keith Packard
Recording the tail pointer in a local variable improves performance, but if someone messes up and fails to reload at the right time, the driver will write commands to the wrong part of the ring and scramble execution badly. This change (available by setting I915_RING_VALIDATE to 1) checks to make sure the cached tail pointer matches the hardware tail pointer at each ring buffer addition, calling BUG_ON when that's not true.
2008-05-22[gem] Release GEM buffers from work task scheduled from IRQ.Eric Anholt
There are now 3 lists. Active is buffers currently in the ringbuffer. Flushing is not in the ringbuffer, but needs a flush before unbinding. Inactive is as before. This prevents object_free → unbind → wait_rendering → object_reference and a kernel oops about weird refcounting. This also avoids an synchronous extra flush and wait when freeing a buffer which had a write_domain set (such as a temporary rendered to and then from using the 2d engine). It will sit around on the flushing list until the appropriate flush gets emitted, or we need the GTT space for another operation.
2008-05-20[gem] Use a separate sequence number field from classic/ttmEric Anholt
This lets us get some qualities we desire, such as using the full 32-bit range (except zero), avoiding DRM_WAIT_ON, and a 1:1 mapping of active sequence numbers to request structs, which will be used soon for throttling and interrupt-driven list cleanup.
2008-05-15[gem] Rename the GTT LRU lists to active (executing) and inactive (idle).Eric Anholt
2008-05-12[intel] When polling for ring space, sleep for a lot longer (10ms)Keith Packard
If the ring is full, the engine will surely be running for more than 10ms.
2008-05-09GEM: Separate the LRU into execution list and LRU list.Eric Anholt
Now, the LRU list has objects that are completely done rendering and ready to kick out, while the execution list has things with active rendering, which have associated cookies and reference counts on them.
2008-05-06GEM: Use irq-based fencing rather than syncing and evicting every exec.Eric Anholt
2008-05-05Monitor ACTHD register while polling for idle ring.Keith Packard
When batch buffers are executing, the ring may be stuck for a long time. Monitor the ACTHD pointer which will show if the execution engine is actually hung.
2008-05-05Remove some debug messages.Keith Packard
2008-05-05Correct execbuffer offset. Add memory barrier and chipset flush.Keith Packard
2008-05-05Add i915_dispatch_gem_execbuffer (broken).Keith Packard
This function submits a gem-based execbuffer to the ring. It doesn't work yet.
2008-05-01Add pin/unpin object ioctls for gem.Eric Anholt
2008-05-01checkpoint: rename to GEM and a few more i915 bits.Eric Anholt
2008-04-30Hacking towards hooking up execbuffer.Eric Anholt
2008-04-22i915: gfx hw and i945gme fixes from upstreamDave Airlie
From Jesse and Zhenyu originally.
2008-03-24i915: fix oops on agp=offDave Airlie
Kernel bug 10289.