summaryrefslogtreecommitdiff
path: root/linux/drm_drv.h
AgeCommit message (Collapse)Author
2004-10-08Fix refcount bug in stealth modeJon Smirl
2004-10-07Fix drm_exit to allow for DRM(global) being deleted when framebuffer isJon Smirl
loaded.
2004-09-20Remove size restriction on permanent addmapJon Smirl
2004-09-20remove HAVE_COUNTERSDave Airlie
2004-09-16Let's try adding the dyn-minor patch again. This patch will reuse minorJon Smirl
numbers if a card is hotplugged in/out instead of just having them increase.
2004-09-15Back dyn-minor patch out for now. fops handling is broken on some cardsJon Smirl
2004-09-15Dynamic device minor support. Minor device numbers will be reused if theJon Smirl
device is hotplugged in/out of the system
2004-09-12Fix error path in probe() to release resources if there is an error.Jon Smirl
2004-09-10More general patch to mark resources in use by all DRM drivers. Makes theJon Smirl
code Linux specific.
2004-09-05missed fix as part of last checkinDave Airlie
2004-09-05merge back bunch of whitespace and misc changes from kernelDave Airlie
2004-09-04Fixup OS_HAS_AGP/OS_HAS_MTRR along lines of patches going to kernel, asDave Airlie
suggested by Arjan.. Signed-off-by: Dave Airlie <airlied@linux.ie>
2004-09-02Fix ref count problem in stealth mode. pci_get_subsys() with last parameterJon Smirl
set does the pci_dev_put for you.
2004-08-30implement drm_core_check_feature and use it .. looks lots nicerDave Airlie
2004-08-29remove hacky context thing that was gamma onlyDave Airlie
2004-08-29Drop GAMMA DRM from a great height ...Dave Airlie
2004-08-28Initialize pdev to NULL correctly so that pci_get_subsys() will work.Jon Smirl
2004-08-27Make DRM detect vesafb and revert to stealth mode to avoid resourceJon Smirl
conflicts
2004-08-24Merged drmfntbl-0-0-2Dave Airlie
2004-08-24addmap-base-2 patch from Jon Smirl:Dave Airlie
sets up the DRM to have the ability to have permanent maps while the driver is loaded...
2004-08-24This patch adds three new ioctl's to the VIA Unichrome/Pro DRM driver:Erdi Chen
DRM_IOCTL_VIA_DMA_INIT DRM_IOCTL_VIA_CMDBUFFER DRM_IOCTL_VIA_FLUSH The first ioctl sets up an area in AGP memory that will be used as the ring buffer. The second ioctl copies a command buffer from user space memory to the ring buffer. The third ioctl waits for engine idle until it returns. The motivation for this patch is to avoid the wait for engine idle call before each buffer flush in the current DRI driver. With this patch, the DRI driver can continue to flush its buffer as long as there is free space in the ring buffer. This patch adds an additional copy operation on the command buffer. This buffer copying is necessary to support multiple DRI clients rendering simultaneously. Otherwise, more CPU time will be spent in the busy loop waiting for engine idle between DRI context switch. Even in the single client case, the tradeoff is reasonable in comparision to the kernel call to check for free buffer space for the client to render directly to the ring buffer.
2004-08-17Merged drmfntbl-0-0-1Dave Airlie
2004-08-15Add dev to DRIVER_CTX_DTOR( dev, pos->handle) so that sis driver willJon Smirl
compile #if 0 get_pci_driver use in hotplug function until fbdev work around is written
2004-08-11minor patch from Jon Smirl : sets up some things for later useDave Airlie
2004-08-10Patch from Jon Smirl to add attribute field to the pciids, and use this forDave Airlie
certain radeon combinations - intel drivers can probably use this for dual head capable devices etc..
2004-08-03fix for drm in /proc - from Jon SmirlDave Airlie
2004-07-25if the driver has already register don't do another intermodule registerDave Airlie
2004-07-20first set of __user annotations from kernel (Al Viro)Dave Airlie
2004-07-15sparse cleanups from kernel: Al ViroDave Airlie
2004-07-14Fix reference counting for stub for new Linux PCI probeDave Airlie
2004-06-21fix bug with pci_disable_device in the wrong place (Paul Mackerras) removeDave Airlie
hack code from me..
2004-06-12dirty hack to make mach64 work, (don't worry I'll get around to fixing itDave Airlie
asap..)
2004-05-10do some real testing and fix the DRM initialising and unloadingDave Airlie
2004-05-09Commit sysfs and drm PCI changes for 2.6 kernelDave Airlie
2004-05-02better device class support from Jon Smirls patches..Dave Airlie
2004-04-21centralise pci ids into one place and use scripts to generate files forDave Airlie
kernel
2004-04-082.6 patches for larger dev_tDave Airlie
2004-04-08patch from Linux kernel 2.6.5Dave Airlie
2004-03-16Add a missing ifdef CTX to get rid of the waring in the gamma driver build.Jon Smirl
XFree86 bug: Reported by: Submitted by: Reviewed by: Obtained from:
2004-02-20drm_ctx_dtor.patch Submitted by: Erdi ChenKeith Whitwell
2003-11-05- Tie the DRM to a specific device: setunique no longer succeeds when givenEric Anholt
a busid that doesn't correspond to the device the DRM is attached to. This is a breaking of backwards-compatibility only for the multiple-DRI-head case with X Servers that don't use interface 1.1. - Move irq_busid to drm_irq.h and make it only return the IRQ for the current device. Retains compatibility with previous X Servers, cleans up unnecessary code. This means no irq_busid on !__HAVE_IRQ, but can be changed if necessary. - Bump interface version to 1.2. This version when set signifies that the control ioctl should ignore the irq number passed in and enable the interrupt handler for the attached device. Otherwise it errors out when the passed-in irq is not equal to the device's. - Store the highest version the interface has been set to in the device. - Fix a recursion on DRM_LOCK in irq_uninstall on FreeBSD. This leaves irq_uninstall being done without the lock in some cases, but it was racey anyways.
2003-11-04Memory layout transition:Michel Daenzer
the 2D driver initializes MC_FB_LOCATION and related registers sanely the DRM deduces the layout from these registers clients use the new SETPARAM ioctl to tell the DRM where they think the framebuffer is located in the card's address space the DRM uses all this information to check client state and fix it up if necessary This is a prerequisite for things like direct rendering with IGP chips and video capturing.
2003-10-24Switch pci enumeration call to work on both 2.4 and 2.6 pci_for_each_dev isJon Smirl
not supported on 2.6
2003-10-23Move to "old-style" probing as documented in linux/Documentation/pci.txt.Eric Anholt
This should resolve the probe problems with radeon framebuffer due to pci_driver attachment being exclusive.
2003-10-23- Introduce a new ioctl, DRM_IOCTL_SET_VERSION. This ioctl allows theEric Anholt
server or client to notify the DRM that it expects a certain version of the device dependent or device independent interface. If the major doesn't match or minor is too large, EINVAL is returned. A major of -1 means that the requestor doesn't care about that portion of the interface. The ioctl returns the actual versions in the same struct. - Introduce DRM DI interface version 1.1. If the server requests version 1.1, then the DRM sets the unique itself according to the busid of the device it probed, which may then be accessed as normal using getunique. - Request version 1.1 in libdrm's drmOpenByBusID, allowing the X Server to request based on a BusID. Introduce a wrapper for DRM_IOCTL_SET_VERSION and bump libdrm minor version. - Pass the busid in DRIScreenInit if libdrm can handle both a busid and name. This allows drmOpenByBusID to be used to find the DRM instead of just the driver name, which allows us in the future to tie a DRM more strongly to the device it probed to. Introduce a function DRICreatePCIBusID which creates a busid in the form pci:oooo:bb:dd.f similar to linux's pci_name() function. This matches the format used by the DRM in version 1.1. libdrm knows how to match both this format and the old PCI:b:d:f format. - Use the new DRICreatePCIBusID function in the *_dri.c to request the new, more exact busid format.
2003-10-19Fix probing on 2.5+ kernels, which require that drivers have .id_table set.Eric Anholt
We use PCI_ANY_ID to ask that our probe is called for every available device. Submitted by: jonsmirl
2003-10-17- Move IRQ functions from drm_dma.h to new drm_irq.h and disentangle themEric Anholt
from __HAVE_DMA. This will be useful for adding vblank sync support to sis and tdfx. Rename dma_service to irq_handler, which is more accurately what it is. - Fix the #if _HAVE_DMA_IRQ in radeon, r128, mga, i810, i830, gamma to have the right number of underscores. This may have been a problem in the case that the server died without doing its DRM_IOCTL_CONTROL to uninit.
2003-10-17- Converted Linux drivers to initialize DRM instances based on PCI IDs, notEric Anholt
just a single instance. Moved the PCI ID lists from <card>_drv.c in BSD to <card>.h. The PCI ID lists include a driver private field, which may be used by drivers for chip family or other information. Based on work by jonsmirl. - Make tdfx_drv.c and tdfx.h match other drivers. - Fixed up linking of sis shared files. Tested with Radeon and SiS on Linux and FreeBSD, including a Linux setup with 2 SiS cards in a machine, but only one head being used (with DRI)
2003-08-15Merge from 2.6 kernel (Linus Torvalds)Michel Daenzer
2003-08-06Fix maplist entries being used after they were freed; thanks to BenjaminMichel Daenzer
Herrenschmidt for tracking this down
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 14:43:05 +0000