| Age | Commit message (Collapse) | Author |
|---|
|
find_or_create_page doesn't quite set up pages correctly; any newly created
pages aren't hooked into the shmem object quite right; user space mmaps of
those pages end up mapping pages full of zeros which then get written to the
real pages inappropriately. This patch requires that the kernel export
shmem_getpage.
|
|
When a software fallback has completed, usermode must notify the kernel so
that any scanout buffers can be synchronized. This ioctl should be called
whenever a fallback completes to flush CPU and chipset caches.
|
|
Need to overhaul the mess that is driver ioctls
|
|
believing userspace causes oopses
|
|
The PCI caps register reports MSI support even though it isn't really there.
|
|
This fixes registration when MSI is set up after the stub function fills in
dev->irq. Otherwise /proc/interrupts would report attachment to the fasteoi
interrupt. dev->irq is still exposed (and updated at IRQ setup)
for the drivers that use it for whatever reason.
|
|
In leavevt_ioctl, queue an MI_FLUSH and then block waiting for it to
complete. This will empty the active and flushing lists. That leaves only
the inactive list to evict.
|
|
Pin/unpin need to know whether to remove/add objects from the inactive list,
inactive objects cannot be in any GPU write domain as those would be on the
flushing list instead. However, inactive objects may be in the CPU write
domain.
|
|
Now that gem_object_unbind waits for rendering to complete, objects should
not be active when they are being pulled from the GTT. BUG_ON if this is
broken.
|
|
Inactive list elements may not be pinned, active or have non-CPU write
domains.
|
|
|
|
|
|
Moving to the CPU domain doesn't ensure that rendering is finished, the
buffer may still be in use as a texture or other data source.
|
|
Not quite portable, but these are useful for intel. Some more general
mechanism could be done...
|
|
Loop end variable 'pinned' was set one too low.
|
|
Pinning the objects avoids accidentally evicting them while binding
other objects.
|
|
Record the last execbuffer sequence for each client.
Record that sequence in the throttle ioctl as the 'throttle sequence'.
Wait for the last throttle sequence in the throttle ioctl.
|
|
When i915_wait_request clears object from the active list, it may end up
freeing them and not moving them to the inactive list. This ends up
unbinding objects from the GTT without there ever being new objects visible
to i915_gem_evict_something on the inactive list. As the only success
condition required the presence of objects on the inactive list, this would
falsely assume that no GTT space had been made available, and end up
returning -ENOMEM to the application.
|
|
|
|
We want request retirement to occur about once a second when the request
queue is non-empty. This was done with a timer that queued a work_struct,
using a delayed_work instead makes a lot more sense.
|
|
i915_add_request was calling schedule_delayed_work before adding the request
to the list; it makes more sense to do that last.
|
|
|
|
|
|
This should have been bumped when the fence interface was changed the
other day. Better late than never, I suppose.
|
|
We no longer need to use it to protect against shared ringbuffer access.
|
|
|
|
This is the create (may want location flags), pread/pwrite/mmap
(performance tuning hints), and set_domain (will 32 bits be enough for
everyone?) ioctls. Left in the generic set are just flink/open/close.
The 2D driver must be updated for this change, and API but not ABI is broken
for 3D. The driver version is bumped to mark this.
|
|
|
|
They are not unnecessary since the kernel's the only thing touching the ring.
|
|
This requires that the X Server use the execbuf interface for buffer
submission, as it no longer has direct access to the ring. This is
therefore a flag day for the gem interface.
This also adds enter/leavevt ioctls for use by the X Server. These would
get stubbed out in a modesetting implementation, but are required while
in an environment where the device's state is only managed by the DRM while
X has the VT.
|
|
|
|
|
|
|
|
|
|
The driver can know what hardware requires MI_BATCH_BUFFER vs
MI_BATCH_BUFFER_START; there's no reason to let user mode configure this.
|
|
Without the user IRQ running constantly, there's no wakeup when the ring
empties to go retire requests and free buffers. Use a 1 second timer to make
that happen more often.
|
|
Instead of throttling and execbuffer time, have the application ask to
throttle explicitly. This allows the throttle to happen less often, and
without holding the DRM lock.
|
|
|
|
struct_mutex cannot be held while blocking on DRM lock.
|
|
Without kernel modesetting, this requires cooperation of the userspace
modesetting driver. We may have to leave the vblank interrupt enabled otherwise
to avoid problems.
|
|
Only compensate when the driver counter actually appears to have moved
backwards.
The compensation deltas need to be incremental instead of absolute; drop the
vblank_offset field and just use atomic_sub().
|
|
Turns out the radeon driver is affected by the same problem that prompted i915
to revert to less useful counter flipping at the end of the vblank interval. In
the long term, we can hopefully implement more reliable methods to achieve
counter flipping at the beginning of vblank, but otherwise this should be an
acceptable workaround.
|
|
|
|
This reverts commit 6671ad1917698b6174a1af314b63b3800d75248c.
The vblank ioctl needs to update the userspace parameters when interrupted by
a signal, which was prevented by this. Let's see if this breaks other ioctls...
|
|
This should be pci_map_page not pci_map_single
|
|
Just renaming this function and related parameters to match terminology used
elsewhere in the driver.
|
|
set_domain can block waiting for rendering to complete. If that process is
interrupted by a signal, it can return -EINTR. Catch this error in all
callers and correctly deal with the result.
|
|
Conflicts:
linux-core/Makefile.kernel
shared-core/i915_drv.h
shared-core/nouveau_state.c
|
|
The problem was revealed where on 965, the display list vertex buffer would see:
create -> (CPU, CPU)
set_domain (CPU, CPU) -> (CPU, CPU)
set_comain (CPU, 0) -> (CPU, 0) (no clflush occurred)
execbuf (GPU, 0) -> (CPU+GPU, 0) (still no clflush)
instead of:
create -> (CPU, CPU)
set_domain (CPU, CPU) -> (CPU, CPU)
set_comain (CPU, 0) -> (CPU, CPU)
execbuf (GPU, 0) -> (CPU+GPU, 0) (clflushed)
|
|
|
