| Age | Commit message (Collapse) | Author |
|---|
|
|
|
doesn't fix anything but just making it consistent
|
|
|
|
The i915_vblank_swap() function schedules an automatic buffer swap
upon receipt of the vertical sync interrupt. Such an operation is
lengthy so it can't be allowed to happen in normal interrupt context,
thus the DRM implements this by scheduling the work in a kernel
softirq-scheduled tasklet. In order for the buffer swap to work
safely, the DRM's central lock must be taken, via a call to
drm_lock_take() located in drivers/char/drm/drm_irq.c within the
function drm_locked_tasklet_func(). The lock-taking logic uses a
non-interrupt-blocking spinlock to implement the manipulations needed
to take the lock. This semantic would be safe if all attempts to use
the spinlock only happen from process context. However this buffer
swap happens from softirq context which is really a form of interrupt
context. Thus we have an unsafe situation, in that
drm_locked_tasklet_func() can block on a spinlock already taken by a
thread in process context which will never get scheduled again because
of the blocked softirq tasklet. This wedges the kernel hard.
To trigger this bug, run a dual-head cloned mode configuration which
uses the i915 drm, then execute an opengl application which
synchronizes buffer swaps against the vertical sync interrupt. In my
testing, a lockup always results after running anywhere from 5 minutes
to an hour and a half. I believe dual-head is needed to really
trigger the problem because then the vertical sync interrupt handling
is no longer predictable (due to being interrupt-sourced from two
different heads running at different speeds). This raises the
probability of the tasklet trying to run while the userspace DRI is
doing things to the GPU (and manipulating the DRM lock).
The fix is to change the relevant spinlock semantics to be the
interrupt-blocking form. After this change I am no longer able to
trigger the lockup; the longest test run so far was 20 hours (test
stopped after that point).
Note: I have examined the places where this spinlock is being
employed; all are reasonably short bounded sequences and should be
suitable for interrupts being blocked without impacting overall kernel
interrupt response latency.
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
Conflicts:
linux-core/drm_compat.c
linux-core/drm_compat.h
linux-core/drm_ttm.c
shared-core/i915_dma.c
Bump driver minor to 13 due to introduction of new
relocation type.
|
|
Disable page saving for GPU read-only TTMs.
|
|
NO_EVICT buffers.
|
|
|
|
|
|
|
|
(Alan Hourihane)
|
|
|
|
|
|
|
|
|
|
modprobe can be run with dropped capabilities we still want the kernel bos
to work.
|
|
This patch fixes bits of the DRM so to make the radeon DRI work on
non-cache coherent PCI DMA variants of the PowerPC processors.
It moves the few places that needs change to wrappers to that
other architectures with similar issues can easily add their
own changes to those wrappers, at least until we have more useful
generic kernel API.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
|
this adds something to say the kernel initialised the memory region not
the userspace. and blocks userspace from deallocating kernel areas
|
|
taken from modesetting branch but could be useful outside it.
|
|
Rip out the whole head thing and replace it with an idr and drm_minor
structure.
|
|
writting relocations, otherwise the GPU probably sees some
inconsistent data. Fix fd.o bug#14656
|
|
These are all about the page directory (pointers to pages) rather than the
actual pages backing the allocation.
|
|
|
|
|
|
|
|
|
|
|
|
PCI- or high memory.
This is substantially more efficient than drm_bo_kmap,
since the mapping only lives on a single processor.
Unmapping is done use kunmap_atomic(). Flushes only a single tlb() entry.
Add a support utility int drm_bo_pfn_prot() that returns the
pfn and desired page protection for a given bo offset.
This is all intended for relocations in bound TTMS or vram.
Mapping-accessing-unmapping must be atomic, either using preempt_xx() macros
or a spinlock.
|
|
|
|
PCI- or high memory.
This is substantially more efficient than drm_bo_kmap,
since the mapping only lives on a single processor.
Unmapping is done use kunmap_atomic(). Flushes only a single tlb() entry.
Add a support utility int drm_bo_pfn_prot() that returns the
pfn and desired page protection for a given bo offset.
This is all intended for relocations in bound TTMS or vram.
Mapping-accessing-unmapping must be atomic, either using preempt_xx() macros
or a spinlock.
|
|
Fixes resume from hibernate in some configurations.
|
|
|
|
This fixes at least two problems:
* The vblank_disable_fn timer callback could get called after the DRM was
de-initialized, e.g. on X server shutdown.
* Leak of vblank related resources when disabling and re-enabling the IRQ, e.g.
on an X server reset.
|
|
fix i915 driver to use state for hibernate save avoidance.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Failing to preserve the MI_ARB_STATE register was causing FIFO underruns on
the VGA output on my HP 2510p after resume.
|
|
On many chipsets, the checks for DPLL enable or VGA mode will prevent the
pipeconf regs from being restored, which could result in a blank display or X
failing to come back after resume. So restore them unconditionally along with
actually restoring pipe B's palette correctly.
|
|
On resume, if the interrupt state isn't restored correctly, we may end
up with a flood of unexpected or ill-timed interrupts, which could cause
the kernel to disable the interrupt or vblank events to happen at the
wrong time. So save/restore them properly.
|
|
There were two problems with the existing callback code: the vblank
enable callback happened multiple times per disable, making drivers more
complex than they had to be, and there was a race between the final
decrement of the vblank usage counter and the next enable call, which
could have resulted in a put->schedule disable->get->enable->disable
sequence, which would be bad.
So add a new vblank_enabled array to track vblank enable on per-pipe
basis, and add a lock to protect it along with the refcount +
enable/disable calls to fix the race.
|
|
since a breadcrumb may actually turn up before a corresponding fence object
has been placed on the fence ring.
|
|
sequence number may actually turn up before the corresponding fence
object has been queued on the ring.
Fence drivers can use this member to determine whether a
sequence number must be re-reported.
|
|
waiting types.
Add a "command_stream_barrier" method to the bo driver.
|
|
In hibernate, we may end up calling the VGA save regs function twice, so we
need to make sure it's idempotent. That means leaving ARX in index mode after
the first save operation. Fixes hibernate on 965.
|
|
Should be 0x08 rather than 0xa0, and shouldn't use typedefs.
|
|
|
|
Conflicts:
linux-core/drmP.h
linux-core/drm_drv.c
shared-core/i915_drv.h
shared-core/i915_irq.c
shared-core/mga_irq.c
shared-core/radeon_irq.c
shared-core/via_irq.c
Mostly trivial conflicts.
mach64 support from Mathieu Bérard.
|
|
i915_flush_ttm was unconditionally executing a clflush instruction
to (obviously) flush the cache. Instead, check if the cpu supports
clflush, and if not, fall back to calling wbinvd to flush the entire
cache.
Signed-off-by: Kyle McMartin <kmcmartin@redhat.com>
|
|
This adds new chipset id in drm.
Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com>
|
|
|
|
(1 << bits) is an undefined value when bits == 32.
gcc may generate 1 with this expression
which will lead to an infinite retry loop in
drm_ht_just_insert_please.
Because of the different implement of hash_long,
this issue is more frequenly see on 64 bit system
|
|
|
