summaryrefslogtreecommitdiff
path: root/linux-core
AgeCommit message (Collapse)Author
2008-04-07nouveau: enable accelerated move to sysmemBen Skeggs
2008-04-07nouveau: enable m2mf for tt<->vram moves, fix fence_pollBen Skeggs
2008-04-06radeon_ms: fix framebuffer codeJerome Glisse
2008-04-06Place highmem pages last in the ttm page array.Thomas Hellstrom
2008-04-06Use clflush() when available for cache flushing.Thomas Hellstrom
2008-04-06[I915] Fix VRAM eviction.Thomas Hellstrom
2008-04-06Fix emergency allocation accounting.Thomas Hellstrom
2008-04-03radeon_ms: fixes fb handlingJerome Glisse
2008-03-31radeon_ms: initial pass at command buffer validationJerome Glisse
2008-03-30Initialize the fence::error member.Thomas Hellstrom
2008-03-30[i915] Report buffer state _after_ fence submission to user-space.Thomas Hellstrom
This fixes a problem where the wrong bo->fence_type was reported, and also saves some memory space. [bo core] export the drm_bo_fill_rep_arg function.
2008-03-30Don't call fence::poll during irq if there are no waiters.Thomas Hellström
2008-03-27radeon_ms: this is a modesetting driver, bring things up to dateJerome Glisse
2008-03-27drm: remove authentication on master exit.Dave Airlie
using contexts for this is bad for multiple masters
2008-03-24nouveau: silence warningBen Skeggs
2008-03-20Merge branch 'modesetting-101' of ssh://git.freedesktop.org/git/mesa/drm ↵Jerome Glisse
into modesetting-101
2008-03-20radeon_ms: fix fenceJerome Glisse
2008-03-17Evict cached_mapped relocatee before applying reloc.Thomas Hellstrom
Fix that got left out after the intel-post-reloc merge.
2008-03-17drm: add master set/drop protocolDave Airlie
this may not survive long - just need something for testing
2008-03-17drm: pick correct master for cleaning upDave Airlie
When a master is exiting, make sure we clean it up and not the currently in charge master.
2008-03-17drm: select the correct master to attempt to remove the lock from.Dave Airlie
When destroying DRI sarea, make sure you use the master associated with the sarea and not the one currently in charge
2008-03-17drm/pcigart: fix the pci gart to use the drm_pci wrapper.Dave Airlie
This is the correct fix for the RS690 and hopefully the dma coherent work. For now we limit everybody to a 32-bit DMA mask but it is possible for RS690 to use a 40-bit DMA mask for the GART table itself, and the PCIE cards can use 40-bits for the table entries. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-03-16[via] Allow a little larger stride for SG DMA DownloadFromScreen.Thomas Hellstrom
2008-03-16ati: fix rs690 igp gart by allocating the page table in 32-bit memoryDave Airlie
2008-03-16drm: this u32 should be a dma_addr_tDave Airlie
doesn't fix anything but just making it consistent
2008-03-14fix build problemsAlan Hourihane
2008-03-14drm: Fix race that can lockup the kernelMike Isely
The i915_vblank_swap() function schedules an automatic buffer swap upon receipt of the vertical sync interrupt. Such an operation is lengthy so it can't be allowed to happen in normal interrupt context, thus the DRM implements this by scheduling the work in a kernel softirq-scheduled tasklet. In order for the buffer swap to work safely, the DRM's central lock must be taken, via a call to drm_lock_take() located in drivers/char/drm/drm_irq.c within the function drm_locked_tasklet_func(). The lock-taking logic uses a non-interrupt-blocking spinlock to implement the manipulations needed to take the lock. This semantic would be safe if all attempts to use the spinlock only happen from process context. However this buffer swap happens from softirq context which is really a form of interrupt context. Thus we have an unsafe situation, in that drm_locked_tasklet_func() can block on a spinlock already taken by a thread in process context which will never get scheduled again because of the blocked softirq tasklet. This wedges the kernel hard. To trigger this bug, run a dual-head cloned mode configuration which uses the i915 drm, then execute an opengl application which synchronizes buffer swaps against the vertical sync interrupt. In my testing, a lockup always results after running anywhere from 5 minutes to an hour and a half. I believe dual-head is needed to really trigger the problem because then the vertical sync interrupt handling is no longer predictable (due to being interrupt-sourced from two different heads running at different speeds). This raises the probability of the tasklet trying to run while the userspace DRI is doing things to the GPU (and manipulating the DRM lock). The fix is to change the relevant spinlock semantics to be the interrupt-blocking form. After this change I am no longer able to trigger the lockup; the longest test run so far was 20 hours (test stopped after that point). Note: I have examined the places where this spinlock is being employed; all are reasonably short bounded sequences and should be suitable for interrupts being blocked without impacting overall kernel interrupt response latency. Signed-off-by: Mike Isely <isely@pobox.com>
2008-03-13Fix green offsetAlan Hourihane
2008-03-12Merge branch 'intel-post-reloc'Thomas Hellstrom
Conflicts: linux-core/drm_compat.c linux-core/drm_compat.h linux-core/drm_ttm.c shared-core/i915_dma.c Bump driver minor to 13 due to introduction of new relocation type.
2008-03-12Merge branch 'master' of git+ssh://git.freedesktop.org/git/mesa/drm into ↵Alan Hourihane
modesetting-101 Conflicts: shared-core/i915_dma.c shared-core/i915_drv.h shared-core/i915_irq.c
2008-03-12Bug # 14712Thomas Hellstrom
Disable page saving for GPU read-only TTMs.
2008-03-12Dont allow !sysadmin clients to alter the memory type ofThomas Hellstrom
NO_EVICT buffers.
2008-03-12Fix for debug memory routinesAlan Hourihane
2008-03-12Add error messageAlan Hourihane
2008-03-12Add an emergency pinnable memory quota for root-only processes.Thomas Hellstrom
2008-03-12Fix kernel crash when we hit OOM conditions.Thomas Hellstrom
(Alan Hourihane)
2008-03-12Avoid duplicate calls to drm_ttm_bind in some cases.Thomas Hellstrom
2008-03-12Make sure other TTM memory types than TT is really unbound when evicted.Thomas Hellstrom
2008-03-12drm: fix fd closing ordering.Dave Airlie
If the master fd goes away before the aiglx fd, we try and get a lock that actually doesn't exist.
2008-03-11Add support for monitor hotplug signals/waitsAlan Hourihane
Also adjust i915 irq handling as it follows the 16bit'ism's of the i8xx series.
2008-03-11drm: hopefully fix cursors on 965Dave Airlie
2008-03-10Merge branch 'modesetting-101' of ssh://git.freedesktop.org/git/mesa/drm ↵Jerome Glisse
into modesetting-101
2008-03-10rradeon_ms: rework fence code and bring radeon ms up to dateJerome Glisse
2008-03-10remove unneeded load callDave Airlie
2008-03-07drm: we already worked out the pitch. multiplying by 4 is just madness..Dave Airlie
2008-03-07make startup of Xorg smoother if the mode doesn't change.Dave Airlie
just flip the framebuffer in when required.
2008-03-07worst merge effort everDave Airlie
2008-03-07drm/modesetting: fixup irq removal on exitDave Airlie
2008-03-07Merge branch 'master' of ../../drm into modesetting-101Dave Airlie
2008-03-07flush_agp_mappings commitDave Airlie