| Age | Commit message (Collapse) | Author |
|---|
|
A check in drm_sysfs_connector_remove was supposed to allow it to be called
even with unregistered objects, to make cleanup paths a little simpler.
However, device_is_regsitered didn't always seem to return what we thought it
would, so we'd sometimes end up leaving objects lying around rather than
unregistering them.
Fix this situation up by requiring devices to be registered before being
removed. Any problems resulting from this change should be easier to track
down than the alternative (which is leaving kobjects registered after unload).
|
|
Better to initialize all the struct fields to 0. Also more consistent with
other output init routines.
|
|
|
|
This asks the driver to suggest the best encoder for the connector
during the pick crtcs stage.
Need to also do this during mode setting stages
|
|
Migrated the output mode collection into the helper.
|
|
Move dpms into the helper functions.
Move crtc into the encoder.
Move disable unused functions into the helper.
|
|
Okay we have crtc, encoder and connectors.
No more outputs exposed beyond driver internals
I've broken intel tv connector stuff.
Really for TV we should have one TV connector, with a sub property for the
type of signal been driven over it
|
|
Use subclassing from the drivers to allocate the objects. This saves
two objects being allocated for each crtc/output and generally makes
exit paths cleaner.
|
|
This splits a lot of the core modesetting code out into a file of
helper functions, that are only called from themselves and/or the driver.
The driver gets called into more often or can call these functions from itself
if it is a helper using driver.
I've broken framebuffer resize doing this but I didn't like the API for that
in any case.
|
|
Add code to get panel modes from the VBIOS if present and check whether certain
outputs exist. Should make our display detection code a little more robust.
|
|
It would be nice if one day the DRM driver was the canonical source for
register definitions and core macros. To that end, this patch cleans
things up quite a bit, removing redundant definitions (some with
different names referring to the same register) and generally tidying up
the header file.
|
|
Some fields had snuck into the drm_output structure. Put them back and
fill in more stuff from the EDID block.
|
|
Put off registering new outputs with sysfs until they're properly configured,
or we may get duplicates if the type hasn't been set yet (as is the case with
SDVO initialization). This also means moving de-registration into the cleanup
function instead of output destroy, since the latter occurs during the normal
course of setup when an output isn't found (and therefore not registered with
sysfs yet.
|
|
|
|
|
|
Fix from the DDX driver.
|
|
Conflicts:
linux-core/drmP.h
linux-core/drm_bo.c
linux-core/drm_drv.c
linux-core/drm_objects.h
shared-core/drm.h
shared-core/i915_dma.c
shared-core/i915_drv.h
shared-core/i915_irq.c
Mostly removing typedefs that snuck into the modesetting code and
updating to the latest TTM APIs. As of today, the i915 driver builds,
but there are likely to be problems, so debugging and bugfixes will
come next.
|
|
Change from DIRECTCOLOR to TRUECOLOR, and enable
support for PSEUDOCOLOR. DIRECTCOLOR support needs more work.
Add the ability to change the mode on the fbdev device.
Support depth 8, 15, 16 and 24 (and 32).
Add a /dev/fbX device per CRTC, but there's some code which
doesn't allocate the fbX device unless the output is actually
enabled. Read the code on this as it impacts the fbcon map flags.
Pick CRTC's based on the available outputs. More work could
be done here to match modes, so cloning could be achieved on
outputs. This fits more inline with what the X code does.
|
|
monitor limits, etc.
|
|
routine, which will take care of freeing our dev_priv and i2c ddc bus.
|
|
Now saves previous power level in prepare and sets
that power level in commit, should power level
be 0 it will set maximum level.
|
|
|
|
detection. Also fix up error case for when LVDS mode can't be determined. Leave placeholder code in place for BIOS mode probing and platform quirks.
|
|
|
|
|
|
|
|
- allow drm_buffer_object_create to be called w/o dev_mapping
- fixup i915 init code to allocate memory, fb and set modes right
- pass fb to drm_initial_config for setup
- change some debug output to make it easier to spot
- fixup lvds code to use DDC probing correctly
|
|
into origin/modesetting-101
Conflicts:
linux-core/drm_crtc.c - trivial merge
linux-core/drm_crtc.h - trivial merge
linux-core/intel_display.c - crtc_config -> mode_config
shared-core/i915_dma.c - accommodate new init code in i915_init.c
|
|
- move EDID structures to drm_edid.h
- add EDID info structure to drm_output
- add a few routines to intel_display for getting current mode info
- add some prototypes to intel_drv.h and drm_crtc.h
|
|
Makefile.kernel too).
|
|
|
|
|
|
|
|
|
