summaryrefslogtreecommitdiff
path: root/linux-core/drm_irq.c
AgeCommit message (Collapse)Author
2008-07-21Reinstate dev->vblank_enabled[].Michel Dänzer
I incorrectly thought it was obsolete.
2008-07-21Drop workaround for driver vblank counter going backwards.Michel Dänzer
The driver code that caused this is no longer necessary and has been dropped.
2008-07-21vblank-rework rework cleanups.Michel Dänzer
Remove some dead/obsolete code and make drm_update_vblank_count() static.
2008-07-21Remove obsolete dev->vblank_suspend[crtc] tests.Michel Dänzer
Caused drm_update_vblank_count() not to do its thing when called from drm_modeset_ctl() -> drm_vblank_get(). The vblank functionality no longer needs to be suspended during a modeset, so rename the field to vblank_inmodeset.
2008-07-19Update vblank code to new APIJesse Barnes
In my last push I forgot to convert users of drm_update_vblank_count over to drm_vblank_get/put, since that's where any interrupt off->on update accounting is done now. Since the modeset ioctl did something similar (an open coded update of the counter) convert it over to using get/put too, which saves us from having to deal with every combination of interrupt off & on between calls.
2008-07-17Avoid incorrect vblank wakeupsJesse Barnes
The current code uses the hw vblank counter exclusively, which can lead to wakeups during the active period rather than during the vblank period if the hw counter counts displayed frames rather than vblank periods. This change coverts the code over to using the counter while interrupts are enabled, fixing that issue. It also includes a couple of related changes: one to not enable the new enable/disable behavior until the modeset ioctl is called (to preserve old client behavior) and another to account for lost events due to mode setting with the new counter scheme. BSD will require similar changes to its drm_irq.c code, but they should be straightforward.
2008-06-03vblank: Don't wait or update the counter while the CRTC is supposedly disabled.Michel Dänzer
Without kernel modesetting, this requires cooperation of the userspace modesetting driver. We may have to leave the vblank interrupt enabled otherwise to avoid problems.
2008-06-03vblank: Clean up compensation for spurious wraparounds of driver counter.Michel Dänzer
Only compensate when the driver counter actually appears to have moved backwards. The compensation deltas need to be incremental instead of absolute; drop the vblank_offset field and just use atomic_sub().
2008-06-03vblank: Special-case driver vblank counter going back by 1.Michel Dänzer
Turns out the radeon driver is affected by the same problem that prompted i915 to revert to less useful counter flipping at the end of the vblank interval. In the long term, we can hopefully implement more reliable methods to achieve counter flipping at the beginning of vblank, but otherwise this should be an acceptable workaround.
2008-06-03vblank: Don't return current sequence number and time if interrupted by signal.Michel Dänzer
2008-04-27Use fixed sized types in new ioctlsJesse Barnes
Make both crtc and the command argument 32 bits to avoid any 32-on-64 compat issues.
2008-02-21Don't free irq resources until after we've unregistered the handler.Kristian Høgsberg
2008-02-21linux: Clean up vblank related resources from drm_irq_uninstall().Michel Dänzer
This fixes at least two problems: * The vblank_disable_fn timer callback could get called after the DRM was de-initialized, e.g. on X server shutdown. * Leak of vblank related resources when disabling and re-enabling the IRQ, e.g. on an X server reset.
2008-02-07Fix vblank enable/disable callbacksJesse Barnes
There were two problems with the existing callback code: the vblank enable callback happened multiple times per disable, making drivers more complex than they had to be, and there was a race between the final decrement of the vblank usage counter and the next enable call, which could have resulted in a put->schedule disable->get->enable->disable sequence, which would be bad. So add a new vblank_enabled array to track vblank enable on per-pipe basis, and add a lock to protect it along with the refcount + enable/disable calls to fix the race.
2008-01-24Fixup modeset ioctl number & typedef usageJesse Barnes
Should be 0x08 rather than 0xa0, and shouldn't use typedefs.
2008-01-22Merge branch 'master' into vblank-rework, including mach64 supportJesse Barnes
Conflicts: linux-core/drmP.h linux-core/drm_drv.c shared-core/i915_drv.h shared-core/i915_irq.c shared-core/mga_irq.c shared-core/radeon_irq.c shared-core/via_irq.c Mostly trivial conflicts. mach64 support from Mathieu Bérard.
2008-01-03drm: cleanup DRM_DEBUG() parametersMárton Németh
As DRM_DEBUG macro already prints out the __FUNCTION__ string (see drivers/char/drm/drmP.h), it is not worth doing this again. At some other places the ending "\n" was added. airlied:- I cleaned up a few that this patch missed also
2007-11-22drm: major whitespace/coding style realignment with kernelDave Airlie
2007-11-01Cleanup vblank_init and fix drm_irq_installJesse Barnes
The vblank_init function wanted a couple of cleanups. Also, drm_irq_install wasn't checking the new return value of irq_postinstall. If it returns a failure, assume IRQs didn't get set up and take appropriate action.
2007-10-30Merge branch 'master' into vblank-rework, fixup remaining driversJesse Barnes
Conflicts: linux-core/drmP.h linux-core/drm_drv.c linux-core/drm_irq.c shared-core/i915_drv.h shared-core/i915_irq.c shared-core/mga_drv.h shared-core/mga_irq.c shared-core/radeon_drv.h shared-core/radeon_irq.c Merge in the latest master bits and update the remaining drivers (except mach64 which math_b is working on). Also remove the 9xx hack from the i915 driver; it seems to be correct.
2007-08-06nouveau: Various internal and external API changesBen Skeggs
1. DRM_NOUVEAU_GPUOBJ_FREE Used to free GPU objects. The obvious usage case is for Gr objects, but notifiers can also be destroyed in the same way. GPU objects gain a destructor method and private data fields with this change, so other specialised cases (like notifiers) can be implemented on top of gpuobjs. 2. DRM_NOUVEAU_CHANNEL_FREE 3. DRM_NOUVEAU_CARD_INIT Ideally we'd do init during module load, but this isn't currently possible. Doing init during firstopen() is bad as X has a love of opening/closing the DRM many times during startup. Once the modesetting-101 branch is merged this can go away. IRQs are enabled in nouveau_card_init() now, rather than having the X server call drmCtlInstHandler(). We'll need this for when we give the kernel module its own channel. 4. DRM_NOUVEAU_GETPARAM Add CHIPSET_ID value, which will return the chipset id derived from NV_PMC_BOOT_0. 4. Use list_* in a few places, rather than home-brewed stuff.
2007-07-20Replace DRM_IOCTL_ARGS with (dev, data, file_priv) and remove DRM_DEVICE.Eric Anholt
The data is now in kernel space, copied in/out as appropriate according to the This results in DRM_COPY_{TO,FROM}_USER going away, and error paths to deal with those failures. This also means that XFree86 4.2.0 support for i810 DRM is lost.
2007-07-20Replace filp in ioctl arguments with drm_file *file_priv.Eric Anholt
As a fallout, replace filp storage with file_priv storage for "unique identifier of a client" all over the DRM. There is a 1:1 mapping, so this should be a noop. This could be a minor performance improvement, as everything on Linux dereferenced filp to get file_priv anyway, while only the mmap ioctls went the other direction.
2007-07-16drm: remove drmP.h internal typedefsDave Airlie
2007-07-16drm: detypedef drm.h and fixup all problemsDave Airlie
2007-06-22Merge branch 'vblank-rework' into vblankJesse Barnes
2007-06-22more vblank reworkJesse Barnes
- use a timer for disabling vblank events to avoid enable/disable calls too often - make i915 work with pre-965 chips again (would like to structure this better, but this hack works on my test system)
2007-06-22Fix vblank wait condition.Michel Dänzer
Sync-to-vblank actually works again for me with radeon.
2007-06-22Use drm_calloc instead of assigning 0.Michel Dänzer
2007-06-15Remove DRIVER_IRQ_VBL(2).Michel Dänzer
If the driver doesn't support vertical blank interrupts, it won't call drm_vblank_init(), and dev->num_crtcs will be 0. Also fix an off-by-one test against dev->num_crtcs.
2007-06-15Make vblank waitqueue per CRTC.Michel Dänzer
2007-06-15Wake up vblank waitqueue in drm_handle_vblank().Michel Dänzer
2007-06-15Return current sequence number to userspace after blocking wait for vblank.Michel Dänzer
2007-06-15Fix memory leaks in vblank error paths.Michel Dänzer
Also use drm_calloc instead of drm_alloc and memset, and use the size of the struct instead of the size of the pointer for allocation...
2007-06-14Comment new vblank routines and fixup several issues:Jesse Barnes
- use correct refcount variable in get/put routines - extract counter update from drm_vblank_get - make signal handling callback per-crtc - update interrupt handling logic, drivers should use drm_handle_vblank - move wakeup and counter update logic to new drm_handle_vblank routine - fixup usage of get/put in light of counter update extraction - fix longstanding bug in signal code, update pending counter only *after* we're sure we'll setup signal handling
2007-06-12Update vblank code:Jesse Barnes
- move pre/post modeset ioctl to core - fixup i915 buffer swap - fix outstanding signal count code - create new core vblank init routine - test (works with glxgears) - simplify i915 interrupt handler
2007-06-12Initial checkin of vblank rework. Code attempts to reduce the numberJesse Barnes
of vblank interrupt in order to save power.
2007-05-26drm: cleanup use of Linux list handling macrosDave Airlie
This makes the drms use of the list handling macros a lot cleaner and more along the lines of how they should be used.
2007-03-23drm: remove second spinlock init for tasklet lockDave Airlie
2007-03-11replace instance of SA_SHIRQ with IRQF_SHAREDMaarten Maathuis
backwards compat added by airlied
2007-02-13Bugzilla Bug #9457Thomas Hellstrom
Add refcounting of user waiters to the DRM hardware lock, so that we can use the DRM_LOCK_CONT flag more conservatively. Also add a kernel waiter refcount that if nonzero transfers the lock for the kernel context, when it is released. This is useful when waiting for idle and can be used for very simple fence object driver implementations for the new memory manager. It also resolves the AIGLX startup deadlock for the sis and the via drivers. i810, i830 still require that the hardware lock is really taken so the deadlock remains for those two. I'm not sure about ffb. Anyone familiar with that code?
2006-10-18Merging drm-ttm-0-2-branchThomas Hellstrom
Conflicts: linux-core/drmP.h linux-core/drm_drv.c linux-core/drm_irq.c linux-core/drm_stub.c shared-core/drm.h shared-core/i915_drv.h shared-core/i915_irq.c
2006-10-02Fix type of second argument to spin_lock_irqsave().Michel Dänzer
(cherry picked from f6238cf6244b32bd84e3d2819963d7f5473867c8 commit)
2006-10-02Fix type of second argument to spin_lock_irqsave().Michel Dänzer
2006-10-02Make locked tasklet handling more robust.Michel Dänzer
Initialize the spinlock unconditionally when struct drm_device is filled in, and return early in drm_locked_tasklet() if the driver doesn't support IRQs.
2006-09-29Core vsync: Don't clobber target sequence number when scheduling signal.Michel Dänzer
It looks like this would have caused signals to always get sent on the next vertical blank, regardless of the sequence number. (cherry picked from cf6b2c5299e9be3542d4deddfd05d5811f11d2ef commit)
2006-09-29Core vsync: Add flag DRM_VBLANK_NEXTONMISS.Michel Dänzer
When this flag is set and the target sequence is missed, wait for the next vertical blank instead of returning immediately. (cherry picked from 89e323e4900af84cc33219ad24eb0b435a039d23 commit)
2006-09-29Drop tasklet locked driver callback when uninstalling IRQ.Michel Dänzer
(cherry picked from b9f3009160d8bd1a26a77d6f1616f1679c7b969d commit)
2006-09-29Add support for interrupt triggered driver callback with lock held to DRM core.Michel Dänzer
(cherry picked from d817cc1f30060fcc4a85a05b2de8a2a1687421b5 commit)
2006-09-29Add support for secondary vertical blank interrupt to DRM core.Michel Dänzer
(cherry picked from ab351505f36a6c66405ea7604378268848340a42 commit)