| Age | Commit message (Collapse) | Author |
|---|
|
Lots of conflicts, seems to load ok, but I'm sure some bugs snuck in.
Conflicts:
linux-core/drmP.h
linux-core/drm_lock.c
linux-core/i915_gem.c
shared-core/drm.h
shared-core/i915_dma.c
shared-core/i915_drv.h
shared-core/i915_irq.c
|
|
This fixes registration when MSI is set up after the stub function fills in
dev->irq. Otherwise /proc/interrupts would report attachment to the fasteoi
interrupt. dev->irq is still exposed (and updated at IRQ setup)
for the drivers that use it for whatever reason.
|
|
Passed the compile test; it's ready to ship.
Conflicts:
libdrm/Makefile.am
linux-core/Makefile.kernel
linux-core/drmP.h
linux-core/drm_memrange.c
linux-core/drm_stub.c
shared-core/drm.h
shared-core/i915_dma.c
shared-core/i915_drv.h
shared-core/i915_irq.c
|
|
Without the user IRQ running constantly, there's no wakeup when the ring
empties to go retire requests and free buffers. Use a 1 second timer to make
that happen more often.
|
|
Conflicts:
linux-core/Makefile.kernel
linux-core/drm_compat.c
linux-core/drm_fops.c
linux-core/drm_lock.c
shared-core/drm.h
shared-core/i915_dma.c
shared-core/i915_drv.h
shared-core/i915_irq.c
|
|
Make both crtc and the command argument 32 bits to avoid any 32-on-64 compat
issues.
|
|
Also adjust i915 irq handling as it follows the 16bit'ism's
of the i8xx series.
|
|
|
|
This change adds a driver feature that for i915 is controlled by a module
parameter. You now need to do insmod i915.ko modeset=1 to enable it the
modesetting paths.
It also fixes up lots of X paths. I can run my new DDX driver on this code
with and without modesetting enabled
|
|
modesetting-101
|
|
|
|
modesetting-101
Conflicts:
linux-core/drm_sysfs.c
|
|
This fixes at least two problems:
* The vblank_disable_fn timer callback could get called after the DRM was
de-initialized, e.g. on X server shutdown.
* Leak of vblank related resources when disabling and re-enabling the IRQ, e.g.
on an X server reset.
|
|
modesetting-101
Conflicts:
linux-core/i915_fence.c
linux-core/via_fence.c
shared-core/i915_dma.c
shared-core/i915_drv.h
shared-core/i915_irq.c
|
|
|
|
There were two problems with the existing callback code: the vblank
enable callback happened multiple times per disable, making drivers more
complex than they had to be, and there was a race between the final
decrement of the vblank usage counter and the next enable call, which
could have resulted in a put->schedule disable->get->enable->disable
sequence, which would be bad.
So add a new vblank_enabled array to track vblank enable on per-pipe
basis, and add a lock to protect it along with the refcount +
enable/disable calls to fix the race.
|
|
|
|
Should be 0x08 rather than 0xa0, and shouldn't use typedefs.
|
|
Conflicts:
linux-core/drmP.h
linux-core/drm_drv.c
shared-core/i915_drv.h
shared-core/i915_irq.c
shared-core/mga_irq.c
shared-core/radeon_irq.c
shared-core/via_irq.c
Mostly trivial conflicts.
mach64 support from Mathieu Bérard.
|
|
As DRM_DEBUG macro already prints out the __FUNCTION__ string (see
drivers/char/drm/drmP.h), it is not worth doing this again. At some
other places the ending "\n" was added.
airlied:- I cleaned up a few that this patch missed also
|
|
|
|
The vblank_init function wanted a couple of cleanups.
Also, drm_irq_install wasn't checking the new return value of irq_postinstall.
If it returns a failure, assume IRQs didn't get set up and take appropriate
action.
|
|
Conflicts:
linux-core/drmP.h
linux-core/drm_drv.c
linux-core/drm_irq.c
shared-core/i915_drv.h
shared-core/i915_irq.c
shared-core/mga_drv.h
shared-core/mga_irq.c
shared-core/radeon_drv.h
shared-core/radeon_irq.c
Merge in the latest master bits and update the remaining drivers (except
mach64 which math_b is working on). Also remove the 9xx hack from the i915
driver; it seems to be correct.
|
|
1. DRM_NOUVEAU_GPUOBJ_FREE
Used to free GPU objects. The obvious usage case is for Gr objects,
but notifiers can also be destroyed in the same way.
GPU objects gain a destructor method and private data fields with
this change, so other specialised cases (like notifiers) can be
implemented on top of gpuobjs.
2. DRM_NOUVEAU_CHANNEL_FREE
3. DRM_NOUVEAU_CARD_INIT
Ideally we'd do init during module load, but this isn't currently
possible. Doing init during firstopen() is bad as X has a love of
opening/closing the DRM many times during startup. Once the
modesetting-101 branch is merged this can go away.
IRQs are enabled in nouveau_card_init() now, rather than having the
X server call drmCtlInstHandler(). We'll need this for when we give
the kernel module its own channel.
4. DRM_NOUVEAU_GETPARAM
Add CHIPSET_ID value, which will return the chipset id derived
from NV_PMC_BOOT_0.
4. Use list_* in a few places, rather than home-brewed stuff.
|
|
The data is now in kernel space, copied in/out as appropriate according to the
This results in DRM_COPY_{TO,FROM}_USER going away, and error paths to deal
with those failures. This also means that XFree86 4.2.0 support for i810 DRM
is lost.
|
|
As a fallout, replace filp storage with file_priv storage for "unique
identifier of a client" all over the DRM. There is a 1:1 mapping, so this
should be a noop. This could be a minor performance improvement, as everything
on Linux dereferenced filp to get file_priv anyway, while only the mmap ioctls
went the other direction.
|
|
|
|
|
|
|
|
- use a timer for disabling vblank events to avoid enable/disable calls too
often
- make i915 work with pre-965 chips again (would like to structure this
better, but this hack works on my test system)
|
|
Sync-to-vblank actually works again for me with radeon.
|
|
|
|
If the driver doesn't support vertical blank interrupts, it won't call
drm_vblank_init(), and dev->num_crtcs will be 0.
Also fix an off-by-one test against dev->num_crtcs.
|
|
|
|
|
|
|
|
Also use drm_calloc instead of drm_alloc and memset, and use the size of the
struct instead of the size of the pointer for allocation...
|
|
- use correct refcount variable in get/put routines
- extract counter update from drm_vblank_get
- make signal handling callback per-crtc
- update interrupt handling logic, drivers should use drm_handle_vblank
- move wakeup and counter update logic to new drm_handle_vblank routine
- fixup usage of get/put in light of counter update extraction
- fix longstanding bug in signal code, update pending counter only
*after* we're sure we'll setup signal handling
|
|
- move pre/post modeset ioctl to core
- fixup i915 buffer swap
- fix outstanding signal count code
- create new core vblank init routine
- test (works with glxgears)
- simplify i915 interrupt handler
|
|
of vblank interrupt in order to save power.
|
|
This makes the drms use of the list handling macros a lot cleaner
and more along the lines of how they should be used.
|
|
|
|
backwards compat added by airlied
|
|
Add refcounting of user waiters to the DRM hardware lock, so that we can use the
DRM_LOCK_CONT flag more conservatively.
Also add a kernel waiter refcount that if nonzero transfers the lock for the kernel context,
when it is released. This is useful when waiting for idle and can be used
for very simple fence object driver implementations for the new memory manager.
It also resolves the AIGLX startup deadlock for the sis and the via drivers.
i810, i830 still require that the hardware lock is really taken so the deadlock remains
for those two. I'm not sure about ffb. Anyone familiar with that code?
|
|
Conflicts:
linux-core/drmP.h
linux-core/drm_drv.c
linux-core/drm_irq.c
linux-core/drm_stub.c
shared-core/drm.h
shared-core/i915_drv.h
shared-core/i915_irq.c
|
|
(cherry picked from f6238cf6244b32bd84e3d2819963d7f5473867c8 commit)
|
|
|
|
Initialize the spinlock unconditionally when struct drm_device is filled in,
and return early in drm_locked_tasklet() if the driver doesn't support IRQs.
|
|
It looks like this would have caused signals to always get sent on the next
vertical blank, regardless of the sequence number.
(cherry picked from cf6b2c5299e9be3542d4deddfd05d5811f11d2ef commit)
|
|
When this flag is set and the target sequence is missed, wait for the next
vertical blank instead of returning immediately.
(cherry picked from 89e323e4900af84cc33219ad24eb0b435a039d23 commit)
|
