summaryrefslogtreecommitdiff
path: root/linux-core/drm_fops.c
AgeCommit message (Collapse)Author
2008-05-01checkpoint: rename to GEM and a few more i915 bits.Eric Anholt
2008-04-29Move mmfs ioctls into the DRM. Untested.Eric Anholt
2008-03-14drm: Fix race that can lockup the kernelMike Isely
The i915_vblank_swap() function schedules an automatic buffer swap upon receipt of the vertical sync interrupt. Such an operation is lengthy so it can't be allowed to happen in normal interrupt context, thus the DRM implements this by scheduling the work in a kernel softirq-scheduled tasklet. In order for the buffer swap to work safely, the DRM's central lock must be taken, via a call to drm_lock_take() located in drivers/char/drm/drm_irq.c within the function drm_locked_tasklet_func(). The lock-taking logic uses a non-interrupt-blocking spinlock to implement the manipulations needed to take the lock. This semantic would be safe if all attempts to use the spinlock only happen from process context. However this buffer swap happens from softirq context which is really a form of interrupt context. Thus we have an unsafe situation, in that drm_locked_tasklet_func() can block on a spinlock already taken by a thread in process context which will never get scheduled again because of the blocked softirq tasklet. This wedges the kernel hard. To trigger this bug, run a dual-head cloned mode configuration which uses the i915 drm, then execute an opengl application which synchronizes buffer swaps against the vertical sync interrupt. In my testing, a lockup always results after running anywhere from 5 minutes to an hour and a half. I believe dual-head is needed to really trigger the problem because then the vertical sync interrupt handling is no longer predictable (due to being interrupt-sourced from two different heads running at different speeds). This raises the probability of the tasklet trying to run while the userspace DRI is doing things to the GPU (and manipulating the DRM lock). The fix is to change the relevant spinlock semantics to be the interrupt-blocking form. After this change I am no longer able to trigger the lockup; the longest test run so far was 20 hours (test stopped after that point). Note: I have examined the places where this spinlock is being employed; all are reasonably short bounded sequences and should be suitable for interrupts being blocked without impacting overall kernel interrupt response latency. Signed-off-by: Mike Isely <isely@pobox.com>
2008-03-06drm: reorganise minor number handling using code from modesetting branchDave Airlie
Rip out the whole head thing and replace it with an idr and drm_minor structure.
2007-11-22drm: major whitespace/coding style realignment with kernelDave Airlie
2007-11-21drm: don't reset to 0 irq_enabled when client open file descriptorJerome Glisse
2007-11-05drm: more kernel coding style cleanupsDave Airlie
2007-11-05drm: remove lots of spurious whitespace.Dave Airlie
Kernel "cleanfile" script run.
2007-10-16Drop destroy ioctls for fences and buffer objects.Kristian Høgsberg
We now always create a drm_ref_object for user objects and this is then the only things that holds a reference to the user object. This way unreference on will destroy the user object when the last drm_ref_object goes way.
2007-07-21Fix misc ioctl issues, makes Nouveau run.Pekka Paalanen
Debug print fix in drm_release(). Forgotten local variable init in drm_setversion(). Unnecessary put_user() in drm_addmap_ioctl(). ioctl->cmd check broken in drm_ioctl(); workaround.
2007-07-20Replace DRM_IOCTL_ARGS with (dev, data, file_priv) and remove DRM_DEVICE.Eric Anholt
The data is now in kernel space, copied in/out as appropriate according to the This results in DRM_COPY_{TO,FROM}_USER going away, and error paths to deal with those failures. This also means that XFree86 4.2.0 support for i810 DRM is lost.
2007-07-20Replace filp in ioctl arguments with drm_file *file_priv.Eric Anholt
As a fallout, replace filp storage with file_priv storage for "unique identifier of a client" all over the DRM. There is a 1:1 mapping, so this should be a noop. This could be a minor performance improvement, as everything on Linux dereferenced filp to get file_priv anyway, while only the mmap ioctls went the other direction.
2007-07-18fix some missing whitespace/tabDave Airlie
2007-07-16drm: remove hashtab/sman and object typedefsDave Airlie
2007-07-16drm: remove drmP.h internal typedefsDave Airlie
2007-06-01drm: fixup initialisation of list heads and idrDave Airlie
2007-05-27drm: convert drawable handling to use Linux idrDave Airlie
This cleans this code up a lot and uses the generic Linux idr which is designed for this. Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-05-26drm: cleanup use of Linux list handling macrosDave Airlie
This makes the drms use of the list handling macros a lot cleaner and more along the lines of how they should be used.
2007-03-27drm/ttm: make sure dev_mapping is set-up for the first opener of the drmDave Airlie
This was causing an oops in my miniglx code to try and use a TTM-only setup.
2007-03-19whitespace cleanup pending a kernel mergeDave Airlie
2007-02-13Bugzilla Bug #9457Thomas Hellstrom
Add refcounting of user waiters to the DRM hardware lock, so that we can use the DRM_LOCK_CONT flag more conservatively. Also add a kernel waiter refcount that if nonzero transfers the lock for the kernel context, when it is released. This is useful when waiting for idle and can be used for very simple fence object driver implementations for the new memory manager. It also resolves the AIGLX startup deadlock for the sis and the via drivers. i810, i830 still require that the hardware lock is really taken so the deadlock remains for those two. I'm not sure about ffb. Anyone familiar with that code?
2006-12-20Merge branch 'nouveau-1'Dave Airlie
2006-12-19Reclaim buffers locked fixup.Thomas Hellstrom
Avoid calling reclaim_buffers_locked if we don't have a hardware lock. Improve reclaim_buffers_locked deadlock error formatting.
2006-11-06drm: fixup page alignment on SAREA map on ppc64Dave Airlie
2006-10-03Get rid of all ugly PTE hacks.Thomas Hellstrom
2006-10-02Add a comment to previos commit.Thomas Hellstrom
2006-10-02Trap and be verbose about a deadlock that occurs with AIGLX and drivers thatThomas Hellstrom
use drm_reclaim_buffers_locked().
2006-08-28Merge branch 'master' of git+ssh://git.freedesktop.org/git/mesa/drm into ↵Thomas Hellstrom
drm-ttm-0-2-branch Conflicts: linux-core/drmP.h
2006-08-28drm: lots of small cleanups and whitespace issues fixed upDave Airlie
remove a mach64 warning, align a lot of things from linux kernel
2006-08-28fix const pointer warnings with file_operationsDave Airlie
2006-08-28remove some DRM_ARRAY_SIZE from linux core codeDave Airlie
2006-08-21Generic DRM support base-class support for user-space objects, likeThomas Hellstrom
fence objects and buffer objects: Refcounting, Inter-process sharing, Synchronization Destruction.
2006-08-16Remove hash tables on DRM exit.Thomas Hellstrom
2006-07-24switch drm to use Linux mutexes instead of semaphore.Dave Airlie
I hope the fallback compat code works if not shout at me.
2006-06-06Fix drm_remove_magic potential memory leak / corruption. Move drmThomas Hellstrom
authentication token hashing to new generic hash table implementation.
2006-02-18major realigment of DRM CVS with kernel code, makes integration much easierDave Airlie
2006-01-02use drm_cards_limit instead of cards_limitDave Airlie
2005-11-11convert to use __set_current_state, align some header includesDave Airlie
2005-10-23we don't use this stuff anymore .. remove 1k buffer from driver ..Dave Airlie
2005-09-18remove pci_find_class use for alphaDave Airlie
2005-08-05Rename the driver hooks in the DRM to something a little moreEric Anholt
understandable: preinit -> load postinit -> (removed) presetup -> firstopen postsetup -> (removed) open_helper -> open prerelease -> preclose free_filp_priv -> postclose pretakedown -> lastclose postcleanup -> unload release -> reclaim_buffers_locked version -> (removed) postinit and version were replaced with generic code in the Linux DRM (drivers now set their version numbers and description in the driver structure, like on BSD). postsetup wasn't used at all. Fixes the savage hooks for initializing and tearing down mappings at the right times. Testing involved at least starting X, running glxgears, killing glxgears, exiting X, and repeating. Tested on: FreeBSD (g200, g400, r200, r128) Linux (r200, savage4)
2005-08-04Implement permanent sarea mapsJon Smirl
2005-08-04Split the control of master vs root priv. Everything is still marked asJon Smirl
needing root.
2005-06-30release can happen before dev->ctxlist is allocatedJon Smirl
2005-06-29Bug in conversion from old DRM to core DRM....Dave Airlie
2005-06-04misc cleanup patch from Adrian BunkDave Airlie
2004-10-31Allow drivers to override reclaim_buffers in an OS-independent way byFelix Kuehling
passing drm_device_t* as first parameter, like in the BSD version.
2004-10-28Break poll() to make it match the Xserver's broken expectations.Jon Smirl
2004-10-18Update Doxygen configuration & comments.Jose Fonseca
2004-10-15Move drm_cpu_valid out of drm_init. drm_init is empty now.Jon Smirl