| Age | Commit message (Collapse) | Author |
|---|
|
Conflicts:
linux-core/drm_bufs.c
shared-core/i915_dma.c
shared-core/i915_drv.h
shared-core/i915_irq.c
|
|
Kernel "cleanfile" script run.
|
|
Conflicts:
linux-core/drmP.h
linux-core/drm_bo.c
linux-core/drm_drv.c
linux-core/drm_objects.h
shared-core/drm.h
shared-core/i915_dma.c
shared-core/i915_drv.h
shared-core/i915_irq.c
Mostly removing typedefs that snuck into the modesetting code and
updating to the latest TTM APIs. As of today, the i915 driver builds,
but there are likely to be problems, so debugging and bugfixes will
come next.
|
|
With the previous linux commit, an AGP aperture at the end of the address space
would have wrapped to 0 and the test would have failed.
|
|
The i830 and newer intel 2D code adds the AGP base to map offsets already,
because it wasn't doing the AGP enable which used to set dev->agp->base.
Credit goes to Zhenyu for finding the issue.
|
|
This patch removes some obviously dead code spotted by the Coverity
checker.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
Debug print fix in drm_release().
Forgotten local variable init in drm_setversion().
Unnecessary put_user() in drm_addmap_ioctl().
ioctl->cmd check broken in drm_ioctl(); workaround.
|
|
The data is now in kernel space, copied in/out as appropriate according to the
This results in DRM_COPY_{TO,FROM}_USER going away, and error paths to deal
with those failures. This also means that XFree86 4.2.0 support for i810 DRM
is lost.
|
|
As a fallout, replace filp storage with file_priv storage for "unique
identifier of a client" all over the DRM. There is a 1:1 mapping, so this
should be a noop. This could be a minor performance improvement, as everything
on Linux dereferenced filp to get file_priv anyway, while only the mmap ioctls
went the other direction.
|
|
|
|
|
|
|
|
|
|
|
|
modesetting-101
Conflicts:
linux-core/drm_drv.c
linux-core/drm_fops.c
linux-core/drm_objects.h
linux-core/drm_stub.c
shared-core/i915_dma.c
|
|
This makes the drms use of the list handling macros a lot cleaner
and more along the lines of how they should be used.
|
|
When the kernel driver is loaded it sets up a lot of stuff..
it tears down the same stuff on unload.
This add a new map type called DRM_DRIVER which means the driver will clean the mapping up
and fix up the map cleaner
|
|
This comes from the Re: [patch] paravirt: isolate module ops on lkml
It needs some testing, please report any regressions caused.
Signed-off-by: Dave Airlie <airlied@linux.ie>
|
|
The vmalloc_32 function together with the memset to clear
the new pages are replaced with a vmalloc_user.
A pre-2.6.18 compat vmalloc_user is added.
Please replace any breakage on machines with > 1GB of memory.
|
|
Shared memory areas were not cleared when they are allocated and
handed to user space. Sensitive information may leak.
|
|
This reverts cc22cd8bde39f3e4be8ca9f726a773b0270ebdbc commit.
I put this patch incorrectly in .. will fix now
|
|
ioremap must be balanced by an iounmap and failing to do so can result
in a memory leak.
Tested (compilation only) to make sure the files are compiling without
any warning/error due to new changes
Signed-off-by: Amol Lad <amol@verismonetworks.com>
Signed-off-by: Dave Airlie <airlied@linux.ie>
|
|
Conflicts:
linux-core/drmP.h
linux-core/drm_drv.c
linux-core/drm_irq.c
linux-core/drm_stub.c
shared-core/drm.h
shared-core/i915_drv.h
shared-core/i915_irq.c
|
|
Add DRM_PCI_BUFFER_RO flag for mapping PCI DMA buffer read-only. An additional
flag is needed, since PCI DMA buffers do not have an associated map.
|
|
|
|
drm-ttm-0-2-branch
Conflicts:
linux-core/drmP.h
|
|
remove a mach64 warning, align a lot of things from linux kernel
|
|
|
|
when there is a duplicate handle error. Not for other errors.
|
|
drm-ttm-0-2-branch
|
|
(Reported by Dave Airlie)
|
|
|
|
|
|
I hope the fallback compat code works if not shout at me.
|
|
32-bit physical device addresses are mapped directly to user-tokens. No
duplicate maps are allowed, and the addresses are assumed to be outside
of the range 0x10000000 through 0x30000000. The user-token is identical
to the 32-bit physical start-address of the map.
64-bit physical device addressed are mapped to user-tokens in the range
0x10000000 to 0x30000000 with page-size increments. The user_token should
not be interpreted as an address.
Other map types, like upcoming TTM maps are mapped to user-tokens in the
range
0x10000000 to 0x30000000 with page-size increments. The user_token should
not be interpreted as an address.
This keeps compatibility with buggy drivers, while still implementing a
hashed map lookup. The SiS and via device driver major bumps are
reverted.
|
|
0x10000000 to 0x90000000 in PAGE_SIZE increments.
Implement hashed map lookups.
This potentially breaks both 2D and 3D drivers. If so, the corresponding
2D and 3D driver should be fixed, and it's corresponding drm device driver
should have its major bumped as soon as possible.
Bump sis and via drm device driver majors.
The SiS and Unichrome 3D drivers are fixed in Mesa CVS HEAD and
mesa_6_4_branch.
|
|
|
|
|
|
|
|
|
|
|
|
better future direction.
|
|
drm_agp_foo_ioctl pair. Modifies the MGA DRM to use the drm_agp_foo
functions instead of the drm_foo_agp functions. The drm_foo_agp
functions are no longer exported by drm.ko.
Ensures that dma->seg_count and dma->page_count are properly set in
drm_addbufs_{agp,sg,fb}. drm_addbufs_pci was already correct.
Ensures that mga_do_agp_dma_bootstrap correctly sets agp_buffer_token.
At this point PCI DMA is still broken.
Xorg bug: #4797 Reviewed by: Dave Airlie, Eric Anholt Signed-off-by: Ian
Romanick <idr@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
checking things in in my sleep
|
|
|
