Age | Commit message (Collapse) | Author |
|
|
|
|
|
|
|
This makes the drms use of the list handling macros a lot cleaner
and more along the lines of how they should be used.
|
|
This comes from the Re: [patch] paravirt: isolate module ops on lkml
It needs some testing, please report any regressions caused.
Signed-off-by: Dave Airlie <airlied@linux.ie>
|
|
The vmalloc_32 function together with the memset to clear
the new pages are replaced with a vmalloc_user.
A pre-2.6.18 compat vmalloc_user is added.
Please replace any breakage on machines with > 1GB of memory.
|
|
Shared memory areas were not cleared when they are allocated and
handed to user space. Sensitive information may leak.
|
|
This reverts cc22cd8bde39f3e4be8ca9f726a773b0270ebdbc commit.
I put this patch incorrectly in .. will fix now
|
|
ioremap must be balanced by an iounmap and failing to do so can result
in a memory leak.
Tested (compilation only) to make sure the files are compiling without
any warning/error due to new changes
Signed-off-by: Amol Lad <amol@verismonetworks.com>
Signed-off-by: Dave Airlie <airlied@linux.ie>
|
|
Conflicts:
linux-core/drmP.h
linux-core/drm_drv.c
linux-core/drm_irq.c
linux-core/drm_stub.c
shared-core/drm.h
shared-core/i915_drv.h
shared-core/i915_irq.c
|
|
Add DRM_PCI_BUFFER_RO flag for mapping PCI DMA buffer read-only. An additional
flag is needed, since PCI DMA buffers do not have an associated map.
|
|
|
|
drm-ttm-0-2-branch
Conflicts:
linux-core/drmP.h
|
|
remove a mach64 warning, align a lot of things from linux kernel
|
|
|
|
when there is a duplicate handle error. Not for other errors.
|
|
drm-ttm-0-2-branch
|
|
(Reported by Dave Airlie)
|
|
|
|
|
|
I hope the fallback compat code works if not shout at me.
|
|
32-bit physical device addresses are mapped directly to user-tokens. No
duplicate maps are allowed, and the addresses are assumed to be outside
of the range 0x10000000 through 0x30000000. The user-token is identical
to the 32-bit physical start-address of the map.
64-bit physical device addressed are mapped to user-tokens in the range
0x10000000 to 0x30000000 with page-size increments. The user_token should
not be interpreted as an address.
Other map types, like upcoming TTM maps are mapped to user-tokens in the
range
0x10000000 to 0x30000000 with page-size increments. The user_token should
not be interpreted as an address.
This keeps compatibility with buggy drivers, while still implementing a
hashed map lookup. The SiS and via device driver major bumps are
reverted.
|
|
0x10000000 to 0x90000000 in PAGE_SIZE increments.
Implement hashed map lookups.
This potentially breaks both 2D and 3D drivers. If so, the corresponding
2D and 3D driver should be fixed, and it's corresponding drm device driver
should have its major bumped as soon as possible.
Bump sis and via drm device driver majors.
The SiS and Unichrome 3D drivers are fixed in Mesa CVS HEAD and
mesa_6_4_branch.
|
|
|
|
|
|
|
|
|
|
|
|
better future direction.
|
|
drm_agp_foo_ioctl pair. Modifies the MGA DRM to use the drm_agp_foo
functions instead of the drm_foo_agp functions. The drm_foo_agp
functions are no longer exported by drm.ko.
Ensures that dma->seg_count and dma->page_count are properly set in
drm_addbufs_{agp,sg,fb}. drm_addbufs_pci was already correct.
Ensures that mga_do_agp_dma_bootstrap correctly sets agp_buffer_token.
At this point PCI DMA is still broken.
Xorg bug: #4797 Reviewed by: Dave Airlie, Eric Anholt Signed-off-by: Ian
Romanick <idr@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
checking things in in my sleep
|
|
|
|
|
|
|
|
buffers that have been allocated from AGP. This includes some new
capable(CAP_SYS_ADMIN) checks, these functions are also protected by
the root requirement on the IOCTL macros.
|
|
|
|
code duplication, and it also hands you the map pointer so you don't
need to re-find it.
- Remove the permanent maps flag. Instead, for register and framebuffer
maps, we always check whether there's already a map of that type and
offset around. Move the Radeon map initialization into presetup (first
open) so it happens again after every takedown.
- Remove the split cleanup of maps between driver takedown (last close) and
cleanup (module unload). Instead, always tear down maps on takedown,
and drivers can recreate them on first open.
- Make MGA always use addmap, instead of allocating consistent memory in
the PCI case and then faking up a map for it, which accomplished nearly
the same thing, in a different order. Note that the maps are exposed to
the user again: we may want to expose a flag to avoid this, but it's
not a security concern, and saves us a lot of code.
- Remove rmmaps in the MGA driver. Since the function is only called during
takedown anyway, we can let them die a natural death.
- Make removal of maps happen in one function, which is called by both
drm_takedown and drm_rmmap_ioctl.
Reviewed by: idr (previous revision) Tested on: mga (old/new/pci dma),
radeon, savage
|
|
|
|
This patch adds serveral new ioctls and a new query to get_param query to
support PCI MGA cards.
Two ioctls were added to implement interrupt based waiting. With this
change, the client-side driver no longer needs to map the primary DMA
region or the MMIO region. Previously, end-of-frame waiting was done by
busy waiting in the client-side driver until one of the MMIO registers
(the current DMA pointer) matched a pointer to the end of primary DMA
space. By using interrupts, the busy waiting and the extra mappings are
removed.
A third ioctl was added to bootstrap DMA. This ioctl, which is used by the
X-server, moves a *LOT* of code from the X-server into the kernel. This
allows the kernel to do whatever needs to be done to setup DMA buffers.
The entire process and the locations of the buffers are hidden from
user-mode.
Additionally, a get_param query was added to differentiate between G4x0
cards and G550 cards. A gap was left in the numbering sequence so that,
if needed, G450 cards could be distinguished from G400 cards. According
to Ville Syrjälä, the G4x0 cards and the G550 cards handle
anisotropic filtering differently. This seems the most compatible way
to let the client-side driver know which card it's own. Doing this very
small change now eliminates the need to bump the DRM minor version
twice.
http://marc.theaimsgroup.com/?l=dri-devel&m=106625815319773&w=2
A number of ioctl handlers in linux-core were also modified so that they
could be called in-kernel. In these cases, the in-kernel callable
version kept the existing name (e.g., drm_agp_acquire) and the ioctl
handler added _ioctl to the name (e.g., drm_agp_acquire_ioctl).
This patch also replaces the drm_agp_do_release function with
drm_agp_release. drm_agp_release (drm_core_agp_release in the previous
patch) is very similar to drm_agp_do_release, and I saw no reason to
have both.
This commit *breaks the build* on BSD. Eric said that he would make the
required updates to the BSD side soon.
Xorg bug: 3259 Reviewed by: Eric Anholt
|
|
|
|
linux-core to free pci memory without freeing the structure. Linux-core
internals often create pci dma handle structures on the stack due to
the lack of a drm_local_map_t to store them in properly. Fix the
original drm_pci_free to actually free the dma handle structure instead
of leaking it.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
|
|
drm_addbufs. This makes the code more like the BSD code, and makes the
drm_addbufs_* functions callable in-kernel.
Reviewed by: Dave Airlie
|
|
with IOMMUs and such. There is one usage of the forbidden vtophys()
left in drm_scatter.c which will be fixed up soon. This required a KPI
change for drm_pci_alloc/free() to return/use a drm_dma_handle_t that
keeps track of os-specific bits, rather than just passing around the
vaddr/busaddr/size.
Submitted by: Tonnerre Lombard (partially) Tested on: FreeBSD: Rage128
AGP/PCI Linux: Savage4 AGP/PCI
|
|
FreeBSD. Add drm_get_resource_{start|len} so linux-specific stuff
doesn't need to be in shared code.
- Fix mach64 build by using __DECONST to work around passing a const
pointer to useracc, which is unfortunately not marked const.
- Get rid of a lot of maplist code by not having dev->maplist be a pointer,
and by sticking the link entries directly in drm_local_map_t rather
than having a separate structure for the linked list.
- Factor out map uninit and removal into its own routine, rather than
duplicating in both drm_takedown() and drm_rmmap().
- Hook up more driver functions, and correct FreeBSD-specific bits of
radeon_cp.c, making radeon work.
- Baby steps towards using bus_space as we should.
|
|
The attached patch adds a new buffer type DRM_FB_BUFFER. It works like AGP
memory but uses video memory.
From: austinyuan@viatech.com.cn (fd.o bug 1668) Signed-off-by: Dave Airlie
<airlied@linux.ie>
|