| Age | Commit message (Collapse) | Author |
|---|
|
krefs are way easier than a custom-coded spinlock+int combo.
|
|
|
|
|
|
|
|
|
|
It's not really a graphics memory allocator, just something to track ranges
of address space. It doesn't involve actual allocation, and was consuming
some desired namespace.
|
|
Conflicts:
linux-core/Makefile.kernel
linux-core/drm_compat.c
linux-core/drm_fops.c
linux-core/drm_lock.c
shared-core/drm.h
shared-core/i915_dma.c
shared-core/i915_drv.h
shared-core/i915_irq.c
|
|
This patch ties outputs, output properties and hotplug events into the
DRM core. Each output has a corresponding directory under the primary
DRM device (usually card0) containing dpms, edid, modes, and connection
status files.
New hotplug change events occur when outputs are added or hotplug events
are detected.
|
|
using contexts for this is bad for multiple masters
|
|
this may not survive long - just need something for testing
|
|
This is the correct fix for the RS690 and hopefully the dma coherent work.
For now we limit everybody to a 32-bit DMA mask but it is possible for
RS690 to use a 40-bit DMA mask for the GART table itself,
and the PCIE cards can use 40-bits for the table entries.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
modesetting-101
Conflicts:
shared-core/i915_dma.c
shared-core/i915_drv.h
shared-core/i915_irq.c
|
|
|
|
Also adjust i915 irq handling as it follows the 16bit'ism's
of the i8xx series.
|
|
Conflicts:
linux-core/drmP.h
linux-core/drm_drv.c
linux-core/drm_proc.c
linux-core/drm_stub.c
linux-core/drm_sysfs.c
|
|
Rip out the whole head thing and replace it with an idr and drm_minor
structure.
|
|
This change adds a driver feature that for i915 is controlled by a module
parameter. You now need to do insmod i915.ko modeset=1 to enable it the
modesetting paths.
It also fixes up lots of X paths. I can run my new DDX driver on this code
with and without modesetting enabled
|
|
|
|
Allow mode to be set with fb_id set to -1, meaning set
the mode with the current fb (if we have one bound).
Allow intelfb to hook back up it's fb if modesetting
clears it (maybe temporary).
Move any crtc->fb related register changes to set_base
in intel_fb.
General intelfb cleanups.
|
|
modesetting-101
Conflicts:
linux-core/drm_sysfs.c
|
|
fix i915 driver to use state for hibernate save avoidance.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
modesetting-101
Conflicts:
linux-core/i915_fence.c
linux-core/via_fence.c
shared-core/i915_dma.c
shared-core/i915_drv.h
shared-core/i915_irq.c
|
|
|
|
|
|
|
|
|
|
Fixup the minor number allocation scheme to use an idr and move the control
nodes up higher.
|
|
There were two problems with the existing callback code: the vblank
enable callback happened multiple times per disable, making drivers more
complex than they had to be, and there was a race between the final
decrement of the vblank usage counter and the next enable call, which
could have resulted in a put->schedule disable->get->enable->disable
sequence, which would be bad.
So add a new vblank_enabled array to track vblank enable on per-pipe
basis, and add a lock to protect it along with the refcount +
enable/disable calls to fix the race.
|
|
Conflicts:
linux-core/drm_bo.c
linux-core/drm_drv.c
shared-core/drm.h
shared-core/i915_dma.c
shared-core/i915_drv.h
shared-core/i915_irq.c
shared-core/radeon_irq.c
|
|
Conflicts:
linux-core/drmP.h
linux-core/drm_drv.c
shared-core/i915_drv.h
shared-core/i915_irq.c
shared-core/mga_irq.c
shared-core/radeon_irq.c
shared-core/via_irq.c
Mostly trivial conflicts.
mach64 support from Mathieu Bérard.
|
|
|
|
|
|
|
|
|
|
modesetting-101
Conflicts:
linux-core/drm_drv.c
shared-core/drm.h
shared-core/i915_dma.c
|
|
|
|
Conflicts:
linux-core/drmP.h
shared-core/i915_dma.c
shared-core/i915_drm.h
shared-core/radeon_drv.h
|
|
|
|
Conflicts:
shared-core/i915_dma.c
tests/ttmtest/src/ttmtest.c
|
|
This header file is shared across linux and bsd, but is not installed
for user space to access. It's the place to put prototypes and data
types that aren't platform or chipset specific, but still internal to
the drm.
|
|
Conflicts:
linux-core/drm_bufs.c
shared-core/i915_dma.c
shared-core/i915_drv.h
shared-core/i915_irq.c
|
|
|
|
Conflicts:
linux-core/Makefile.kernel
linux-core/drm_stub.c
linux-core/i915_drv.c
shared-core/i915_dma.c
shared-core/i915_drv.h
Fixup suspend/resume conflicts (basically use what's in DRM master for now).
Also fix up a few other conflicts that snuck in (i915_dma changes etc.).
|
|
|
|
Conflicts:
linux-core/drmP.h
linux-core/drm_drv.c
linux-core/drm_irq.c
shared-core/i915_drv.h
shared-core/i915_irq.c
shared-core/mga_drv.h
shared-core/mga_irq.c
shared-core/radeon_drv.h
shared-core/radeon_irq.c
Merge in the latest master bits and update the remaining drivers (except
mach64 which math_b is working on). Also remove the 9xx hack from the i915
driver; it seems to be correct.
|
|
|
|
modesetting-101
Conflicts:
linux-core/Makefile.kernel
linux-core/drmP.h
shared-core/radeon_cp.c
shared-core/radeon_drv.h
shared-core/radeon_irq.c
modified: linux-core/Makefile.kernel
modified: linux-core/ati_pcigart.c
modified: linux-core/drmP.h
new file: linux-core/radeon_buffer.c
modified: linux-core/radeon_drv.c
new file: linux-core/radeon_fence.c
modified: shared-core/radeon_cp.c
modified: shared-core/radeon_drm.h
modified: shared-core/radeon_drv.h
modified: shared-core/radeon_irq.c
modified: tests/ttmtest/src/ttmtest.c
|
|
Make DRM devices use real Linux devices instead of class devices, which are
going away. While we're at it, clean up some of the interfaces to take
struct drm_device * or struct device * and use the global drm_class where
needed instead of passing it around.
|
|
modesetting-101
Conflicts:
linux-core/drm_bo.c
linux-core/drm_objects.h
shared-core/i915_dma.c
shared-core/i915_drv.h
|
|
We now always create a drm_ref_object for user objects and this is then the only
things that holds a reference to the user object. This way unreference on will
destroy the user object when the last drm_ref_object goes way.
|
