| Age | Commit message (Collapse) | Author |
|---|
|
|
|
the DDX does this and used to handle it internally
|
|
requires --enable-radeon-experimental-api for now
|
|
Normal map() should operate as before, and map_range()/map_flush() should
give correct results but lacking any performance difference from map().
Nothing exiting being done here yet, but the interface is a good start.
|
|
|
|
Fixes the dri1 gallium driver if the front buffer happens to be non-linear.
|
|
|
|
|
|
This avoids making objects significantly bigger than they would be
otherwise, which would result in some failing at binding to the GTT.
Found from firefox hanging on:
http://upload.wikimedia.org/wikipedia/commons/b/b7/Singapore_port_panorama.jpg
due to a software fallback trying to do a GTT-mapped copy between two 73MB
BOs that were instead each 128MB, and failing because both couldn't fit
simultaneously.
The cost here is that we get no opportunity to cache these objects and
avoid the mapping. But since the objects are a significant percentage
of the aperture size, each mapped access is likely having to fault and rebind
the object most of the time anyway.
Bug #20152 (2/3)
|
|
The convention is that all APIs are per-bufmgr, so make this one the same.
Then, have it return -1 on failure so that the application can know what's
going on and do something sensible.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
This wraps the new DRM_IOCTL_I915_GET_PIPE_FROM_CRTC_ID ioctl,
allowing applications to discover the pipe number corresponding
to a given CRTC ID. This is necessary for doing pipe-specific
operations such as waiting for vblank on a given CRTC.
|
|
Scanout buffers need to be freed through the kernel as it holds a reference
to them; exposing this API allows applications allocating scanout buffers to
flag them as not reusable.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
|
|
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
|
|
Add assertions to drm_intel_gem_bo_reference,
drm_intel_gem_bo_reference_locked and drm_intel_gem_bo_unreference_locked
that the object has not been freed (refcount > 0). Mistakes in refcounting
lead to attempts to insert a bo into a free list more than once which causes
application failure as empty free lists are dereferenced as buffer objects.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
Fixes assertion failures on later use of the object.
|
|
|
|
|
|
|
|
This reverts commit cd5c66c659168cbe2e3229ebf8be79f764ed0ee1. It broke too
many kernel assumptions about the double ioctl (connector status, mode
fetching, etc.)
|
|
This patch speeds up drmModeGetConnector by pre-allocating mode &
property info space before calling into the kernel. In many cases this
pre-allocation will be sufficient to hold the returned values (it's easy
enough to tweak if the common case becomes larger), which means we don't
have to make the second call, which saves a lot of time.
Acked-by: Jakob Bornecrantz <wallbraker@gmail.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
|
|
libdrm has some support for GTT mapping already, but there are bugs
with it (no surprise since it hasn't been used much).
In fixing 20803, I found that sharing bo_gem->virtual was a bad idea,
since a previously mapped object might not end up getting GTT mapped,
leading to corruption. So this patch splits the fields according to
use, taking care to unmap both at free time (but preserving the map
caching).
There's still a risk we might run out of mappings (there's a sysctl
tunable for max number of mappings per process, defaulted to 64k or so
it looks like) but at least GTT maps will work with these changes (and
some others for fixing PAT breakage in the kernel).
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
|
|
|
|
|
|
|
|
|
|
- This was causing a significant memory leak.
|
|
bo_handle_ref on !mm_enabled treats handle as an offset, make
bo_handle_get do the same rather than failing.
|
|
drm_handle_t is defined to be a u32 on linux and a u64 on everything
else. This addresses an issue on FreeBSD amd64 where the map offsets
may be greater than 32bits. When the handle is cast to 32bit, mmap
cannot match the requested map and causes X to crash.
This should be a NOOP on linux since drm_handle_t is always 32bit.
Signed-off-by: Robert Noland <rnoland@2hip.net>
|
|
This helps avoid the n^2 performance cost of counting tree size when we
get a lot of relocations into our batch buffer. rgb10text on keithp's laptop
went from 136k glyphs/sec to 234k glyphs/sec.
|
|
|
|
Oops. Disting is hard.
|
|
|
|
|
|
|
|
This avoids using the oldest BO in the BO cache and waiting for it to be
idle before we turn around and render to it with the GPU. Thanks to
Chris Wilson for pointing out how silly we were being.
|
|
|
|
|
|
The minor CPU cost here is probably outweighed by bothering us with noise in
the tool.
|
|
libdrm isn't supposed to ship APIs not present in a released kernel.
|
|
|
|
nouveau_notifier.c had two places where void* was used in arithmetic,
fixed by using char*.
nouveau_dma_wait(), nouveau_notifier_wait_status() and
nouveau_resource_alloc() had signed/unsigned comparison warnings, fixed
by changing the function parameter into an unsigned type.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
|
|
|
|
|
|
|
|
|
|
This patch tries to use the available fence count to figure out whether a
given batch can succeed or not (just like the aperture check).
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
|
|
|
|
It's also unused, so worthless.
|
|
It is impossible to replace the original semantics of this call purely
in userland, since the fb_id would change.
after discussion with Dr_Jakob
Signed-Off-By: Owain Ainsworth <oga@openbsd.org>
Acked-By: Jakob Bornecrantz <jakob@vmware.com>
|
|
Should be more portable this way.
|
