summaryrefslogtreecommitdiff
path: root/bsd-core/drm_drv.c
AgeCommit message (Collapse)Author
2005-08-05Rename the driver hooks in the DRM to something a little moreEric Anholt
understandable: preinit -> load postinit -> (removed) presetup -> firstopen postsetup -> (removed) open_helper -> open prerelease -> preclose free_filp_priv -> postclose pretakedown -> lastclose postcleanup -> unload release -> reclaim_buffers_locked version -> (removed) postinit and version were replaced with generic code in the Linux DRM (drivers now set their version numbers and description in the driver structure, like on BSD). postsetup wasn't used at all. Fixes the savage hooks for initializing and tearing down mappings at the right times. Testing involved at least starting X, running glxgears, killing glxgears, exiting X, and repeating. Tested on: FreeBSD (g200, g400, r200, r128) Linux (r200, savage4)
2005-08-04Fix the MGA driver on BSD by passing in the proper chipset flags to theEric Anholt
driver's preinit routine, and by using DRM_COPY_TO_USER_IOCTL when copying out to an ioctl's data pointer. Pulled from the latest version of my drm-hook-rename.diff and only compile-tested after that.
2005-06-29Get the BSD DRM compiling again after MGA and mapping changes. Note thatEric Anholt
i915 has been disabled for the moment, rather than working around linux-specific code in the shared dir.
2005-06-14Adds support for PCI cards to MGA DRMIan Romanick
This patch adds serveral new ioctls and a new query to get_param query to support PCI MGA cards. Two ioctls were added to implement interrupt based waiting. With this change, the client-side driver no longer needs to map the primary DMA region or the MMIO region. Previously, end-of-frame waiting was done by busy waiting in the client-side driver until one of the MMIO registers (the current DMA pointer) matched a pointer to the end of primary DMA space. By using interrupts, the busy waiting and the extra mappings are removed. A third ioctl was added to bootstrap DMA. This ioctl, which is used by the X-server, moves a *LOT* of code from the X-server into the kernel. This allows the kernel to do whatever needs to be done to setup DMA buffers. The entire process and the locations of the buffers are hidden from user-mode. Additionally, a get_param query was added to differentiate between G4x0 cards and G550 cards. A gap was left in the numbering sequence so that, if needed, G450 cards could be distinguished from G400 cards. According to Ville Syrjälä, the G4x0 cards and the G550 cards handle anisotropic filtering differently. This seems the most compatible way to let the client-side driver know which card it's own. Doing this very small change now eliminates the need to bump the DRM minor version twice. http://marc.theaimsgroup.com/?l=dri-devel&m=106625815319773&w=2 A number of ioctl handlers in linux-core were also modified so that they could be called in-kernel. In these cases, the in-kernel callable version kept the existing name (e.g., drm_agp_acquire) and the ioctl handler added _ioctl to the name (e.g., drm_agp_acquire_ioctl). This patch also replaces the drm_agp_do_release function with drm_agp_release. drm_agp_release (drm_core_agp_release in the previous patch) is very similar to drm_agp_do_release, and I saw no reason to have both. This commit *breaks the build* on BSD. Eric said that he would make the required updates to the BSD side soon. Xorg bug: 3259 Reviewed by: Eric Anholt
2005-06-06Add a few more bits of Tonnerre's NetBSD port (Still need to deal with theEric Anholt
device attachment).
2005-04-16Use /*- to begin license blocks in BSD code to reduce diffs against FreeBSDEric Anholt
CVS.
2005-02-19Merge r1.26 from FreeBSD: Now that mem(4) is a kernel module, we need toEric Anholt
depend on it.
2005-02-14Use the proper API to get PCI vendor/device number for a dev.Eric Anholt
PR: ports/76879 Submitted by: Alex, lesha at intercaf dot ru.
2005-02-05- Implement drm_initmap, and extend it with the resource number to helpEric Anholt
FreeBSD. Add drm_get_resource_{start|len} so linux-specific stuff doesn't need to be in shared code. - Fix mach64 build by using __DECONST to work around passing a const pointer to useracc, which is unfortunately not marked const. - Get rid of a lot of maplist code by not having dev->maplist be a pointer, and by sticking the link entries directly in drm_local_map_t rather than having a separate structure for the linked list. - Factor out map uninit and removal into its own routine, rather than duplicating in both drm_takedown() and drm_rmmap(). - Hook up more driver functions, and correct FreeBSD-specific bits of radeon_cp.c, making radeon work. - Baby steps towards using bus_space as we should.
2004-11-07Refine the locking of the DRM. Most significant is covering the driverEric Anholt
ioctls with dev_lock, which is a major step toward being able to remove Giant. Covers some new pieces (dev->unique*) in the core, and avoids one call down into system internals with the drm lock held, which is usually bad (FreeBSD LOR #23, #27).
2004-11-07Now that the memory debug code is gone, and all 3 BSDs have M_ZERO, stopEric Anholt
using drm_alloc/drm_free in the core and instead use plain malloc/free.
2004-11-06Get r128 basically working: Hook up the driver's dma ioctl, use the properEric Anholt
offset into the driver ioctl array, and don't make the ctx bitmap conditional.
2004-11-06Move the lock/unlock ioctls to a more logical place, in drm_lock.c.Eric Anholt
2004-11-06Hook the debug output up to a sysctl, so you can choose to enable atEric Anholt
runtime.
2004-11-06Commit first pieces of port to OpenBSD, done by Martin Lexa (martin atEric Anholt
martinlexa dot cz). Now that we've got porting for all three major BSDs (and the fourth being very similar to FreeBSD), move the mostly-duplication drm_os_* files into drmP.h. Remove some cruft from linux heritage and from pieces of the DRM that have since been removed. Note that things are still not quite working for even FreeBSD, but these are first steps at cleanup, and just a WIP checkpoint.
2004-11-06Commit WIP of BSD conversion to core model. Compiles for r128, radeon, butEric Anholt
doesn't run yet. Moves the ioctl definitions for these two drivers back to the shared code -- they aren't OS-specific.
2004-08-17Merged drmfntbl-0-0-1Dave Airlie
2004-08-03bring over fix from i865-agp branch, it now probes the driver, X hangsDave Airlie
box..
2004-07-06MFC as of 20040705: dev_t -> struct cdev * change.Eric Anholt
2004-05-11Merge from FreeBSD-current. Mostly 64-bit cleanliness fixes, but a fewEric Anholt
driver interface changes from -current.
2004-05-09Warning fixes.Eric Anholt
2004-05-09Commit sysfs and drm PCI changes for 2.6 kernelDave Airlie
2004-04-21centralise pci ids into one place and use scripts to generate files forDave Airlie
kernel
2003-12-16Don't ioremap the framebuffer area. The ioremapped area wasn't used byEric Anholt
anything, and took up valuable KVA. While I'm in the area, clean up BSD MTRR stuff some more. Suggested by: jonsmirl
2003-11-12Fix a locking nit, and add asserts in some things that should be calledEric Anholt
with locks held.
2003-11-05- Tie the DRM to a specific device: setunique no longer succeeds when givenEric Anholt
a busid that doesn't correspond to the device the DRM is attached to. This is a breaking of backwards-compatibility only for the multiple-DRI-head case with X Servers that don't use interface 1.1. - Move irq_busid to drm_irq.h and make it only return the IRQ for the current device. Retains compatibility with previous X Servers, cleans up unnecessary code. This means no irq_busid on !__HAVE_IRQ, but can be changed if necessary. - Bump interface version to 1.2. This version when set signifies that the control ioctl should ignore the irq number passed in and enable the interrupt handler for the attached device. Otherwise it errors out when the passed-in irq is not equal to the device's. - Store the highest version the interface has been set to in the device. - Fix a recursion on DRM_LOCK in irq_uninstall on FreeBSD. This leaves irq_uninstall being done without the lock in some cases, but it was racey anyways.
2003-11-05Remove buf_alloc which is unused since the locking commit.Eric Anholt
2003-11-04Memory layout transition:Michel Daenzer
the 2D driver initializes MC_FB_LOCATION and related registers sanely the DRM deduces the layout from these registers clients use the new SETPARAM ioctl to tell the DRM where they think the framebuffer is located in the card's address space the DRM uses all this information to check client state and fix it up if necessary This is a prerequisite for things like direct rendering with IGP chips and video capturing.
2003-10-23- Introduce a new ioctl, DRM_IOCTL_SET_VERSION. This ioctl allows theEric Anholt
server or client to notify the DRM that it expects a certain version of the device dependent or device independent interface. If the major doesn't match or minor is too large, EINVAL is returned. A major of -1 means that the requestor doesn't care about that portion of the interface. The ioctl returns the actual versions in the same struct. - Introduce DRM DI interface version 1.1. If the server requests version 1.1, then the DRM sets the unique itself according to the busid of the device it probed, which may then be accessed as normal using getunique. - Request version 1.1 in libdrm's drmOpenByBusID, allowing the X Server to request based on a BusID. Introduce a wrapper for DRM_IOCTL_SET_VERSION and bump libdrm minor version. - Pass the busid in DRIScreenInit if libdrm can handle both a busid and name. This allows drmOpenByBusID to be used to find the DRM instead of just the driver name, which allows us in the future to tie a DRM more strongly to the device it probed to. Introduce a function DRICreatePCIBusID which creates a busid in the form pci:oooo:bb:dd.f similar to linux's pci_name() function. This matches the format used by the DRM in version 1.1. libdrm knows how to match both this format and the old PCI:b:d:f format. - Use the new DRICreatePCIBusID function in the *_dri.c to request the new, more exact busid format.
2003-10-22- Add DRM_GET_PRIV_WITH_RETURN macro. This can be used in shared code toEric Anholt
get the drm_file_t * based on the filp passed in ioctl handlers. - Use this macro on BSD for simplification and improve its error reporting. Make failure to find the drm_file_t * print as an error, not debug. This failure may be part of the problem with KDE. - Make debug and error print macros include the pid on BSD.
2003-10-20Fix the possibility of sleeping with locks held in sysctls by copying theEric Anholt
data into temporary variables with the lock held then outputting to sysctls with the lock released. Rearranged a little extra code to aid this. Note that drm_memory_debug.h hasn't had this fix applied, but I consider that code to be just about dead anyway.
2003-10-20Clean up BSD MTRR handling. The NetBSD code is untested, but it's my bestEric Anholt
shot.
2003-10-19- SMPng lock the DRM. This is only partial -- there are a few code pathsEric Anholt
used by root (the X Server) which are not locked. However, it should deal with lost-IRQ issues on -current which I think people have been experiencing but I am unable to reproduce (though I understand why they would occur, because of a bug of mine). Note that most of the locking (DRM_LOCK()/UNLOCK()) is all covered by Giant still, so it doesn't matter yet. - Remove locking on FreeBSD-stable and NetBSD. These are covered by the fact that there is no reentrancy of the kernel except by interrupts, which are locked using spldrm()/splx() instead.
2003-10-17- Move IRQ functions from drm_dma.h to new drm_irq.h and disentangle themEric Anholt
from __HAVE_DMA. This will be useful for adding vblank sync support to sis and tdfx. Rename dma_service to irq_handler, which is more accurately what it is. - Fix the #if _HAVE_DMA_IRQ in radeon, r128, mga, i810, i830, gamma to have the right number of underscores. This may have been a problem in the case that the server died without doing its DRM_IOCTL_CONTROL to uninit.
2003-10-17- Converted Linux drivers to initialize DRM instances based on PCI IDs, notEric Anholt
just a single instance. Moved the PCI ID lists from <card>_drv.c in BSD to <card>.h. The PCI ID lists include a driver private field, which may be used by drivers for chip family or other information. Based on work by jonsmirl. - Make tdfx_drv.c and tdfx.h match other drivers. - Fixed up linking of sis shared files. Tested with Radeon and SiS on Linux and FreeBSD, including a Linux setup with 2 SiS cards in a machine, but only one head being used (with DRI)
2003-10-03Some code cleanups done while working on locking. Reduces always-trueEric Anholt
tests, excessive indenation, convoluted handling of errors, or code duplication.
2003-10-03Stylistic preparation for SMPng locking work: DRM_LOCK/DRM_UNLOCK have sideEric Anholt
effects, so make them look like functions (add parenthesis).
2003-10-02Mostly whitespace cleanups and style(9) fixes focused on "if(" -> "if ("Eric Anholt
Change some nearby memset()s to bzero()s or to calloc allocations to take advantage of M_ZERO). Reverse some error tests to reduce high levels of indentation. Move the sg_cleanup() call out of the maplist loop in DRM(takedown)-- I can't see any need for it to be inside.
2003-10-02Allow the DRM to attach to a "drmsub" device. This will be provided by theEric Anholt
i810 AGP module, working around the limitation of one driver per device. Obtained from: i865-0-1-branch
2003-08-19- Remove $FreeBSD$ tags as they weren't too useful and merges are now beingEric Anholt
done through perforce. - Add copyright headers to drm_os_*bsd.h, still need to research the other copyright-less files better.
2003-04-28Fix a typo: On takedown the mtrr operation is MEMRANGE_SET_REMOVE, notEric Anholt
_UPDATE.
2003-04-25Merge from FreeBSD-current.Eric Anholt
2003-04-24Clean up the style of the linux-compat code and use ioctl() directly ratherEric Anholt
than reimplementing it.
2003-04-24Remove more gamma DMA infrastructure. Most of this code was copied straightEric Anholt
from linux, so it could be added back if some driver needed it in the future.
2003-04-24Remove more gamma DMA code. This isn't all of it, but it's a major portion.Eric Anholt
2003-04-24Move some common code from addbufs_<type> to addbufs. Make buf_alloc beEric Anholt
protected by the count_lock and make it non-atomic.
2003-04-24Remove the ioctl_count variable from the device. A reference is held to theEric Anholt
fp throughout the ioctl syscall, so the device can't be closed out from under us.
2003-04-24Remove a bunch of dead code and fix spelling of a couple of comments.Eric Anholt
2003-04-24Move one definition to drm_drv.h and remove the rest of drm_init.h whichEric Anholt
was all unused.
2003-04-24Remove DRM_DMA_HISTOGRAM and associated code.Eric Anholt