summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-07-18drm/radeon: fixup 0 vs NULLDave Airlie
2008-07-17[FreeBSD] drm_irq.c updates for vblank fixes.Robert Noland
2008-07-17i915: remove old broken vblank codeJesse Barnes
Remove the unused (and broken) "in vblank" code now that the core has been fixed to use a counter while interrupts are enabled. Also make the vblank pipe get/set ioctls into dumb stub functions, since with the new code we can no longer let userspace control whether vblank interrupts are enabled, or the core code will misbehave.
2008-07-17Avoid incorrect vblank wakeupsJesse Barnes
The current code uses the hw vblank counter exclusively, which can lead to wakeups during the active period rather than during the vblank period if the hw counter counts displayed frames rather than vblank periods. This change coverts the code over to using the counter while interrupts are enabled, fixing that issue. It also includes a couple of related changes: one to not enable the new enable/disable behavior until the modeset ioctl is called (to preserve old client behavior) and another to account for lost events due to mode setting with the new counter scheme. BSD will require similar changes to its drm_irq.c code, but they should be straightforward.
2008-07-16FreeBSD: Fix radeon buildRobert Noland
2008-07-16BSD: change drm_locked_task*() to use the same scheme as linux.Owain Gordon Ainsworth
The current code can sleep in an interrupt handler, that is bad. So instead if we can't grab the lock, flag it and run the tasklet on unlock. Signed-off-by: Robert Noland <rnoland@2hip.net>
2008-07-15[FreeBSD] We aren't allowed to hold locks over bus_dma_tag_create or ↵Robert Noland
bus_dmamem_alloc.
2008-07-15This is a modified version of Hong's patch from last month, with a fewHong Liu
modifications to make it work correctly on my test hardware (altered the backlight write function, made it enable the legacy backlight controller interrupts on mobile hardware, sorted the interrupt function so we don't get an excessive number of vblank interrupts). This lets the backlight keys on my T61 work properly, though there's a 750msec or so delay between the request and the brightness actually changing - this sounds awfully like the hardware spinning waiting for a status flag to become ready, but as far as I can tell they're all set correctly. If anyone can figure out what's wrong here, it'd be nice to know. Some of the functions are still stubs and just tell the hardware that the request was successful. These can be filled in as kernel modesetting gets integrated. I think it's worth getting this in anyway, since it's required for backlight control to work properly on some new platforms. Signed-off-by: Matthew Garrett <mjg@redhat.com>
2008-07-15drm: fix missing symbol exportDave Airlie
2008-07-15drm: add fix for PAT on radeon with 2.6.26Dave Airlie
2008-07-15drm/pcigart: fix warningDave Airlie
2008-07-08xgi: use true/false instead of TRUE/FALSEmartin capitanio
2008-07-08nouveau: interface changes for nv5x 3dBen Skeggs
2008-07-03i915: official name for GM45 chipsetZhenyu Wang
Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com>
2008-07-01i915: only use tiled blits on 965+Jesse Barnes
When scheduled swaps occur, we need to blit between front & back buffers. I the buffers are tiled, we need to set the appropriate XY_SRC_COPY tile bit, only on 965 chips, since it will cause corruption on pre-965 (e.g. 945). Bug reported by and fix tested by Tomas Janousek <tomi@nomi.cz>. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-07-01Revert "i915: only use tiled blits on 965+"Jesse Barnes
This reverts commit 727d4f1d1667e43b3558bd5f6ed6dc2cd9c29401, somehow git deleted the symlink and replaced it with the file.
2008-07-01i915: only use tiled blits on 965+Jesse Barnes
When scheduled swaps occur, we need to blit between front & back buffers. If the buffers are tiled, we need to set the appropriate XY_SRC_COPY tile bit, but only on 965 chips, since it will cause corruption on pre-965 (e.g. 945). Bug reported by and fix tested by Tomas Janousek <tomi@nomi.cz>. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-07-01i915: enable bus mastering on i915 at resume timeJie Luo
On 9xx chips, bus mastering needs to be enabled at resume time for much of the chip to function. With this patch, vblank interrupts will work as expected on resume, along with other chip functions. Fixes kernel bugzilla #10844. Signed-off-by: Jie Luo <clotho67@gmail.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-06-25nv50: when destroying a channel make sure it's not still current on PFIFOBen Skeggs
We won't get a PFIFO context switch when the same channel ID is recreated if the hw still thinks the channel is already active, which causes fun issues. Should allow X to be stopped and started without tearing down the entire card state in lastclose().
2008-06-24i915: remove unused variableJesse Barnes
Leftover dev_priv from the move of the suspend/resume code into shared-core.
2008-06-24i915: register definition & header file cleanupJesse Barnes
It would be nice if one day the DRM driver was the canonical source for register definitions and core macros. To that end, this patch cleans things up quite a bit, removing redundant definitions (some with different names referring to the same register) and generally tidying up the header file.
2008-06-23nv50: oops, keep VRAM allocations aligned at 64KiB - that's our page size..Ben Skeggs
2008-06-23nv50: use same dma object for fb/tt accessBen Skeggs
We depend on the VM fully now for memory protection, separate DMA objects for VRAM and GART are unneccesary. However, until the next interface break (soon) a client can't depend on the objects being the same and must still call NV_OBJ_SET_DMA_* methods appropriately.
2008-06-23nouveau: allocate drm-use vram buffers from end of vram.Ben Skeggs
This avoids seeing garbage from engine setup etc before X gets around to pointing the CRTCs at a new scanout buffer. Not actually a noticable problem before G80 as PRAMIN is forced to the end of VRAM by the hardware already.
2008-06-22agp: use true/false instead of TRUE/FALSEDave Airlie
2008-06-21RADEON: 0x1002 0x5657 is actually an RV410Alex Deucher
See bug 14289
2008-06-20drm: only use kernel ioctl cmd when doing a core ioctl.Dave Airlie
Need to overhaul the mess that is driver ioctls
2008-06-20r300: fix warningDave Airlie
2008-06-20drm: fix the ioctl to not believe userspace.Dave Airlie
believing userspace causes oopses
2008-06-18i915: Add support for Intel 4 series chipsetsZhenyu Wang
Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com>
2008-06-15radeon: *really* fix screen corruption thanks to Lukasz KrotowskiJerome Glisse
2008-06-15radeon: actualy try to fix the corruptionJerome Glisse
2008-06-15radeon: fix screen corruption introduced by last patchJerome Glisse
2008-06-13[FreeBSD] Fix another lock leakRobert Noland
Reported by vehemens
2008-06-13radeon: bump driver date to know if lockup fix is inJerome Glisse
2008-06-13radeon: r345xx fixe hard lockupJerome Glisse
This patch should fixe hard lockup and convert them in softlockup (ie you can ssh the box but the gpu is busted and we are waiting in loop for it to come back to reason).
2008-06-12xgi: Bump kernel versionIan Romanick
This should have been bumped when the fence interface was changed the other day. Better late than never, I suppose.
2008-06-11RADEON: use DSTCACHE_CTLSTAT rather than RB2D_DSTCACHE_CTLSTATAlex Deucher
According to the hw guys, you should use DSTCACHE_CTLSTAT to flush the 2D dst cache rather than RB2D_DSTCACHE_CTLSTAT.
2008-06-10xgixp: Remove dependency on TTM fencesIan Romanick
2008-06-10xgi: Fix 64-bit kernel / 32-bit user issue.Ian Romanick
2008-06-10ati_pcigart: split out the page insert functionDave Airlie
2008-06-09RADEON: Add untested support for RS400 chipsAlex Deucher
GART setup appears to work the same as RS480 chips. Also RC4xx chips are actually RS400 based, not RS480 based.
2008-06-09RADEON: switch IGP gart to use radeon_write_agp_base()Alex Deucher
2008-06-08Fix typo in i915_suspendRobert Noland
Reported by vehemens
2008-06-08I915 suspend/resume for FreeBSDRobert Noland
2008-06-09r300/r500: add hier-z regsDave Airlie
2008-06-08[FreeBSD] Rework ati_pcigart.cRobert Noland
This is mostly just a diff reduction with the linux version. I'm not convinced that it will make anything better.
2008-06-08[FreeBSD] We need to request busmastering support.Robert Noland
This seems to be the key to getting at least some radeon cards working. Most, if not all drivers need it enabled, so just request it once the driver has attached.
2008-06-08[FreeBSD] Incorporate vblank fixes for bsd.Robert Noland
2008-06-08[FreeBSD] Forgot to call mtx_destroy on all the locks at unload.Robert Noland