summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-04-10export output name to userspaceDavid Airlie
2007-04-10set the base address of the CRTC correctlyDavid Airlie
2007-04-10fixup numerous issues with adding framebuffer supportDavid Airlie
This still isn't perfect but it fixes a few oopses and cleans up some of the tabs and bugs in the original fb limit code
2007-04-09Slam in most of X.Org's i830_lvds (not quite done yet so removed from ↵Jesse Barnes
Makefile.kernel too).
2007-04-10mode: fixup problems with framebuffer add functionDavid Airlie
2007-04-10make crtc_config be named mode_configDave Airlie
X.org calls this crtc_config but this is a bad name and will confuse ppl later (and me now :-)
2007-04-10add addfb/rmfb ioctlsJakob Bornecrantz
Originally from Jakob, cleaned up by airlied.
2007-04-09rs480: Renamed some unknown registers. See dri-devel list.Oliver McFadden
2007-04-09Fix refresh calculation (mistakenly removed 1000 factor needed for integer ↵Jesse Barnes
calulations, fixed mode printout debugging routine instead).
2007-04-09nouveau: NV46 supportBen Skeggs
2007-04-09radeon: bump version for IGPGART supportDave Airlie
2007-04-09radeon: add support for reverse engineered xpress200mDave Airlie
The IGPGART setup code was traced using mmio-trace on fglrx by myself and Phillip Ezolt <phillipezolt@gmail.com> on dri-devel. This code doesn't let the 3D driver work properly as the card has no vertex shader support. Thanks to Matthew Garrett + Ubuntu for providing me some hardware to do this work on.
2007-04-07remove a printk to make things less verboseJesse Barnes
2007-04-07just codingstyle cleanupsJesse Barnes
2007-04-07document drm_mode_duplicate and fix vrefresh calculation (off by 1000 error)Jesse Barnes
2007-04-07various cleanups to EDID code:Jesse Barnes
- pull in FB DDC code (we'll have to rewrite it anyway it appears) - add comments - note a few FIXMEs - make it less quiet, and more informative when it actually does print
2007-04-07make drmP.h include drm_crtc.h for CRTC related stuff.Jesse Barnes
fixup drm_crtc.c so it matches VGA and other outputs properly. make drm_crtc.c less verbose. add function declarations in drm_crtc.h for other files.
2007-04-07fixup install target, not sure what I was smokin...Dave Airlie
2007-04-06i915: use breadcrumb macro everywhereDave Airlie
2007-04-05Add required permission notices for code copied from X.Org source.Eric Anholt
2007-04-06nouveau: make a note about a bit that breaks some cardsBen Skeggs
2007-04-06nouveau: Power up all card units by default on startup.Ben Skeggs
2007-04-05Merge branch 'modesetting-101' of git+ssh://git.freedesktop.org/git/mesa/drm ↵Jesse Barnes
into modesetting-101
2007-04-05Add copyrights before I forgetJesse Barnes
2007-04-05add back compat for boolDave Airlie
2007-04-05checkpoint commit: implement SetCrtc so modes can in theory be set from userDave Airlie
This hooks up the userspace mode set it "seems" to work.
2007-04-05checkpoint commit: added getresources, crtc and outputDave Airlie
This adds the user interfaces from Jakob and hooks them up for 3 ioctls GetResources, GetCrtc and GetOutput. I've made the ids for everything fbs, crtcs, outputs and modes go via idr as per krh's suggestion on irc as it make the code nice and consistent.
2007-04-05initial userspace interface to get modesDave Airlie
2007-04-05Initial import of modesetting for intel driver in DRMDave Airlie
2007-04-05borrow edid.h from fb directoryDave Airlie
2007-04-05add an install target to the drm modules makefileDave Airlie
2007-04-03Fix user object reference when caller is not object creator.Thomas Hellstrom
(Reported by Dave Airlie).
2007-04-03Add a fence flush event to each fence-signaled check when lazy-waitingThomas Hellstrom
to make sure we don't lose any sequence numbers if, for some reason, they don't generate an IRQ.
2007-04-03Make sure we ack irqs before we read a breadcrumb so thatThomas Hellstrom
breadcrumb updates that occur _AFTER_ we've read the breadcrumb really generates a new IRQ.
2007-04-03Evicted no-move buffers can get lost if they end up in anotherThomas Hellstrom
memory type than local.
2007-04-03Fix an oops when trying to clean a not yet initialized memory type.Thomas Hellstrom
2007-04-03Make sure CMA (Can't map aperture) pages are mapped uncached.Thomas Hellstrom
(Should really make this write-combined using PATs, at some point).
2007-04-02r300: Synchronize the register header file again.Oliver McFadden
It's a good idea to keep these synchronized; even though the DRM doesn't use all the defines, maintaining two different copies is prone to errors when the diff gets bigger.
2007-04-01nouveau: fix usage of PGRAPH_CTX_CONTROL on nv20+Matthieu Castet
http://gitweb.freedesktop.org/?p=mesa/drm.git;a=commitdiff;h=17985f07d68322519919a7f629a6d2d9bf3916ed could have broken some nvxx_graph code : it rename NV03_PGRAPH_CTX_CONTROL to NV10_PGRAPH_CTX_CONTROL, but forgot to update it in nvxx_graph file. Also when migrating init stuff in http://gitweb.freedesktop.org/?p=mesa/drm.git;a=commitdiff;h=674cefd4fe4b537a20a10edcb4ec5df55facca8e, NV04_PGRAPH_CTX_CONTROL is used everywhere but the old ddx code use NV_PGRAPH_CTX_CONTROL_NV04 or NV_PGRAPH_CTX_CONTROL.
2007-04-01nouveau : nv10 ctx switch fixMatthieu Castet
restoring NV10_PGRAPH_CTX_SWITCH1 now works
2007-04-01nouveau : set the correct PGRAPH_CTX_CONTROL registerMatthieu Castet
"5a072f32 (Stephane Marchesin 2007-02-03 04:57:06 +0100" broke nv10 ctx switch by setting wrong PGRAPH_CTX_CONTROL reg
2007-03-30Merge branch 'crestline-qa', adding support for the 965GM chipset.Eric Anholt
2007-03-30Merge branch 'origin'Eric Anholt
2007-03-29drm/bo: avoid oops if the memory manager for this type isn't initialisedDave Airlie
2007-03-29nouveau: fix nv04 context switches.Stephane Marchesin
2007-03-27drm/i915: set the bo up at firstopen time not after DMA initDave Airlie
This is required to use TTM to allocate the ring buffer.
2007-03-27drm/ttm: make sure dev_mapping is set-up for the first opener of the drmDave Airlie
This was causing an oops in my miniglx code to try and use a TTM-only setup.
2007-03-27Merge git://proxy01.pd.intel.com:9419/git/mesa/drm into crestlineNian Wu
2007-03-26nouveau: move card initialisation into the drmBen Skeggs
The PGRAPH init for the various cards will need cleaning up at some point, a lot of the values written there are per-context state left over from the all the hardcoding done in the ddx. It's possible some cards get broken by this commit, let me know. Tested on: NV5, NV18, NV28, NV35, NV40, NV4E
2007-03-25Merge git://proxy01.pd.intel.com:9419/git/mesa/drm into crestlineNian Wu