summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-04-20On I965, use correct 3DSTATE_DRAWING_RECTANGLE command in vblankKeith Packard
The batchbuffer submission paths were fixed to use the 965-specific command, but the vblank tasklet was not. When the older version is sent, the 965 will lock up.
2008-04-17Porting DVO stuffHong Liu
Ported from Xorg intel 2d driver. Changed interfaces definitions, which needed to be changed later if other device wants to use these DVO stuff.
2008-04-14Fix buffer object map wait error.Thomas Hellstrom
Add some branch prediction hints.
2008-04-14Fix buffer object creation validation.Thomas Hellstrom
BO lock fixes.
2008-04-14Unlock the BO mutex while waiting for idle, unmapped, unfenced.Thomas Hellstrom
Move unfenced checking into idle checking. Never time out while waiting for software events like unmapped or unfenced.
2008-04-14Fix up buffer manager locking.Thomas Hellstrom
2008-04-11Save and restore dsparb and d_state regsKeith Packard
2008-04-12Merge branch 'modesetting-101' of ssh://git.freedesktop.org/git/mesa/drm ↵Jerome Glisse
into modesetting-101
2008-04-12radeon_ms: rework command submission ioctl & cleanupJerome Glisse
2008-04-10Fixup Intel TV property codeJesse Barnes
Use the new TV property creation routine and fixup the set_property code to actually do a mode set call when properties change.
2008-04-10Split TV property creation into its own routineJesse Barnes
It needs to take arguments from the caller about supported TV formats, so declare it in drm_crtc.h and export it.
2008-04-10Remove structure fields & codeJesse Barnes
Cleanup some random cruft left over from the initial port.
2008-04-10Fix masking in get_load_detect_pipeJesse Barnes
Start i at -1 so that the masking works right.
2008-04-10Keep display info in struct display_infoJesse Barnes
Some fields had snuck into the drm_output structure. Put them back and fill in more stuff from the EDID block.
2008-04-09Add TV out hotplug detectionJesse Barnes
Doesn't yet work on my i915 test machine, but most of the necessary bits should be there.
2008-04-09Fix TV load detectionJesse Barnes
Now that we can allocate load detect pipes, we can perform TV out load detection correctly. Call the new routines and enable proper TV detection.
2008-04-09Port pipe reservation code for load detectionJesse Barnes
TV out needs to do load detection, which means we have to find an available pipe to use for the detection. Port over the pipe reservation code for this purpose.
2008-04-09Add newline to debug output for output addJesse Barnes
2008-04-09Older kernels don't have kobject_uevent_env(), so puntAlan Hourihane
the event for these older kernels.
2008-04-09Fixup sysfs output registrationJesse Barnes
Put off registering new outputs with sysfs until they're properly configured, or we may get duplicates if the type hasn't been set yet (as is the case with SDVO initialization). This also means moving de-registration into the cleanup function instead of output destroy, since the latter occurs during the normal course of setup when an output isn't found (and therefore not registered with sysfs yet.
2008-04-08Merge branch 'modesetting-101' of ssh://git.freedesktop.org/git/mesa/drm ↵Jesse Barnes
into modesetting-101
2008-04-08Add devname in modeset caseJesse Barnes
If the driver is 'modeset' enabled, it'll register it's interrupt handler at load time. Set the devname in this case so that /proc/interrupts makes sense.
2008-04-08Improved DRM sysfs supportJesse Barnes
This patch ties outputs, output properties and hotplug events into the DRM core. Each output has a corresponding directory under the primary DRM device (usually card0) containing dpms, edid, modes, and connection status files. New hotplug change events occur when outputs are added or hotplug events are detected.
2008-04-08radeon_ms: command buffer validation use array of function pointerJerome Glisse
2008-04-07Missing KERNEL_VERSION macroPatrice Mandin
2008-04-07radeon_ms: another fb fix reset mode if fb changedJerome Glisse
2008-04-07Add DragonFly BSD support for device creationHasso Tepper
DragonFly behaves just like FreeBSD in this regard.
2008-04-07nouveau: enable accelerated move to sysmemBen Skeggs
2008-04-07nouveau: enable m2mf for tt<->vram moves, fix fence_pollBen Skeggs
2008-04-06radeon_ms: fix framebuffer codeJerome Glisse
2008-04-06radeon_ms: check for NULL fbJerome Glisse
2008-04-06Place highmem pages last in the ttm page array.Thomas Hellstrom
2008-04-06Use clflush() when available for cache flushing.Thomas Hellstrom
2008-04-06[I915] Fix VRAM eviction.Thomas Hellstrom
2008-04-06Fix emergency allocation accounting.Thomas Hellstrom
2008-04-05nv50: primitive i2c interrupt handlerMaarten Maathuis
2008-04-03radeon_ms: add crtc set base callback & fix paletteJerome Glisse
2008-04-03radeon_ms: fixes fb handlingJerome Glisse
2008-04-03nv50: primitive display interrupt handler.Maarten Maathuis
2008-03-31radeon_ms: small fix & cleanup to command checkingJerome Glisse
2008-03-31nouveau: fix return from function..Dave Airlie
dude kernel moduless use kernel errors :) this fixes an oops on init when this codepath hits.
2008-03-31radeon_ms: initial pass at command buffer validationJerome Glisse
2008-03-30Initialize the fence::error member.Thomas Hellstrom
2008-03-30[i915] Report buffer state _after_ fence submission to user-space.Thomas Hellstrom
This fixes a problem where the wrong bo->fence_type was reported, and also saves some memory space. [bo core] export the drm_bo_fill_rep_arg function.
2008-03-30Don't call fence::poll during irq if there are no waiters.Thomas Hellström
2008-03-30nouveau: forgot to add a breakMaarten Maathuis
2008-03-30nouveau: Add ctx values for nv86.Maarten Maathuis
- Note that this may not work for all nv86.
2008-03-30radeon_ms: add hang debuging helper functionsJerome Glisse
2008-03-30drm/r300: fix wait interface mixupDave Airlie
This interface was defined completely wrong, however userspace has only ever used 4 values from it (0x1, 0x2, 0x3 and 0x6), so fix the interface to do what userspace actually expected but define new defines for new users to use it properly.
2008-03-29r300: Correctly translate the value for the R300_CMD_WAIT command.Oliver McFadden
Previously, the R300_CMD_WAIT command would write the passed directly to the hardware. However this is incorrect because the R300_WAIT_* values used are internal interface values that do not map directly to the hardware. The new function I have added translates the R300_WAIT_* values into appropriate values for the hardware before writing the register. Thanks to John Bridgman for pointing this out. :-)