| Age | Commit message (Collapse) | Author |
|---|
|
In my last push I forgot to convert users of drm_update_vblank_count
over to drm_vblank_get/put, since that's where any interrupt off->on
update accounting is done now. Since the modeset ioctl did something
similar (an open coded update of the counter) convert it over to using
get/put too, which saves us from having to deal with every combination
of interrupt off & on between calls.
|
|
On some distros missing prototypes cause kernel builds to fail. These
are hack to make the code build.
|
|
|
|
|
|
|
|
|
|
Remove the unused (and broken) "in vblank" code now that the core has
been fixed to use a counter while interrupts are enabled. Also make the
vblank pipe get/set ioctls into dumb stub functions, since with the new
code we can no longer let userspace control whether vblank interrupts
are enabled, or the core code will misbehave.
|
|
The current code uses the hw vblank counter exclusively, which can lead
to wakeups during the active period rather than during the vblank period
if the hw counter counts displayed frames rather than vblank periods.
This change coverts the code over to using the counter while interrupts
are enabled, fixing that issue. It also includes a couple of related
changes: one to not enable the new enable/disable behavior until the
modeset ioctl is called (to preserve old client behavior) and another to
account for lost events due to mode setting with the new counter scheme.
BSD will require similar changes to its drm_irq.c code, but they should
be straightforward.
|
|
|
|
The current code can sleep in an interrupt handler, that is bad. So
instead if we can't grab the lock, flag it and run the tasklet on
unlock.
Signed-off-by: Robert Noland <rnoland@2hip.net>
|
|
bus_dmamem_alloc.
|
|
modifications to make it work correctly on my test hardware (altered the
backlight write function, made it enable the legacy backlight controller
interrupts on mobile hardware, sorted the interrupt function so we don't
get an excessive number of vblank interrupts). This lets the backlight
keys on my T61 work properly, though there's a 750msec or so delay
between the request and the brightness actually changing - this sounds
awfully like the hardware spinning waiting for a status flag to become
ready, but as far as I can tell they're all set correctly. If anyone can
figure out what's wrong here, it'd be nice to know.
Some of the functions are still stubs and just tell the hardware that
the request was successful. These can be filled in as kernel modesetting
gets integrated. I think it's worth getting this in anyway, since it's
required for backlight control to work properly on some new platforms.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
|
|
|
|
|
|
|
|
One of our systems has been returning 0xffffffff from all MCHBAR reads, which
means we'll need to figure out why, or add an alternate detection method.
|
|
Various chips have exciting interactions between the CPU and the GPU's
different ways of accessing interleaved memory, so we need some kernel
assistance in determining how it works.
Only fully tested on GM965 so far.
|
|
|
|
|
|
|
|
Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com>
|
|
When scheduled swaps occur, we need to blit between front & back buffers. I
the buffers are tiled, we need to set the appropriate XY_SRC_COPY tile bit,
only on 965 chips, since it will cause corruption on pre-965 (e.g. 945).
Bug reported by and fix tested by Tomas Janousek <tomi@nomi.cz>.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
|
|
This reverts commit 727d4f1d1667e43b3558bd5f6ed6dc2cd9c29401, somehow git
deleted the symlink and replaced it with the file.
|
|
When scheduled swaps occur, we need to blit between front & back buffers. If
the buffers are tiled, we need to set the appropriate XY_SRC_COPY tile bit, but
only on 965 chips, since it will cause corruption on pre-965 (e.g. 945).
Bug reported by and fix tested by Tomas Janousek <tomi@nomi.cz>.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
|
|
On 9xx chips, bus mastering needs to be enabled at resume time for much of the
chip to function. With this patch, vblank interrupts will work as expected
on resume, along with other chip functions. Fixes kernel bugzilla #10844.
Signed-off-by: Jie Luo <clotho67@gmail.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
|
|
We won't get a PFIFO context switch when the same channel ID is recreated if
the hw still thinks the channel is already active, which causes fun issues.
Should allow X to be stopped and started without tearing down the entire
card state in lastclose().
|
|
With the interrupt enable/disable using only the mask register, it was wrong
to use the enable register to detect which pipes had vblank detection
turned on. Also, as we keep a local copy of the mask register around, and
MSI machines smack the hardware during the interrupt handler, it is more
efficient and more correct to use the local copy.
|
|
This shares common code sequences for managing the interrupt register bits
|
|
Leftover dev_priv from the move of the suspend/resume code into shared-core.
|
|
It would be nice if one day the DRM driver was the canonical source for
register definitions and core macros. To that end, this patch cleans things up
quite a bit, removing redundant definitions (some with different names
referring to the same register) and generally tidying up the header file.
|
|
|
|
|
|
A mis-spelled config option (was it spelled that way in the past?)
eliminated kmap_atomic_prot_pfn from core DRM.
|
|
I915_GEM_DOMAIN_CPU is very expensive to wait for -- it generally requires
clflushing the frame buffer.
|
|
Clean up queues, free objects. On the next entervt, unmark the hardware to
let the user try again (presumably after resetting the chip). Someday we'll
automatically recover...
|
|
Pin/copy_from_user/unpin through the GTT to eliminate clflush costs.
Benchmarks say this helps quite a bit.
|
|
|
|
|
|
A mis-spelled config option (was it spelled that way in the past?)
eliminated kmap_atomic_prot_pfn from core DRM.
|
|
I915_GEM_DOMAIN_CPU is very expensive to wait for -- it generally requires
clflushing the frame buffer.
|
|
While debugging the 915, I tried this trick there and accidentally left it
set.
|
|
Clean up queues, free objects. On the next entervt, unmark the hardware to
let the user try again (presumably after resetting the chip). Someday we'll
automatically recover...
|
|
|
|
Pin/copy_from_user/unpin through the GTT to eliminate clflush costs.
Benchmarks say this helps quite a bit.
|
|
still not sure which works best on which hardware; this will make it easier
to experiment.
|
|
|
|
We depend on the VM fully now for memory protection, separate DMA objects
for VRAM and GART are unneccesary. However, until the next interface break
(soon) a client can't depend on the objects being the same and must still
call NV_OBJ_SET_DMA_* methods appropriately.
|
|
This avoids seeing garbage from engine setup etc before X gets around
to pointing the CRTCs at a new scanout buffer. Not actually a noticable
problem before G80 as PRAMIN is forced to the end of VRAM by the hardware
already.
|
|
|
|
See bug 14289
|
