summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-03-25tests: allow tests programs to be installedBenjamin Gaignard
Install test programs is useful in cross compilation case. By default the behavior is the same and test programs aren't installed in $bindir. If --enable-install-test-programs is set then test programs are installed in $bindir. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-03-08radeon: add pci ids for Richland APUsAlex Deucher
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-03-08libdrm/exynos: add test application for 2d gpu.Inki Dae
This patch adds library and test application for g2d gpu(fimg2d). The fimg2d hardware is a 2D graphics accelerator(G2D) that supports Bit Block Transfer(BitBLT). The library includes the following primitive drawing operations: .solid fill - This operation fills the given buffer with the given color data. .copy - This operation copies contents in source buffer to destination buffer. .copy_with_scale - This operation copies contents in source buffer to destination buffer scaling up or down properly. .blend - This operation blends contents in source buffer with the ones in destination buffer. And the above operations uses gem handle or user space address allocated by malloc() as source or destination buffer. And the test application includes just simple primitive drawing tests with the above library. And the guide to test is as the following, "#exynos_fimg2d_test -s connector_id@crtc_id:mode" With this above simple command, four primitive drawing operations would be called step by step and also rendered on the output device to the given connector and crtc id. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-03-07radeonsi: make sure tile_split field are not garbageJerome Glisse
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
2013-02-14freedreno: add freedreno DRMRob Clark
The libdrm_freedreno helper layer for use by xf86-video-freedreno, fdre (freedreno r/e library and tests for driving gpu), and eventual gallium driver for the Adreno GPU. This uses the msm gpu driver from QCOM's android kernel tree. Note that current msm kernel driver is a bit strange. It provides a DRM interface for GEM, which is basically sufficient to have DRI2 working. But it does not provide KMS. And interface to 2d and 3d cores is via different other devices (/dev/kgsl-*). This is not quite how I'd write a DRM driver, but at this stage it is useful for xf86-video-freedreno and fdre (and eventual gallium driver) to be able to work on existing kernel driver from QCOM, to allow to capture cmdstream dumps from the binary blob drivers without having to reboot. So libdrm_freedreno attempts to hide most of the crazy. The intention is that when there is a proper kernel driver, it will be mostly just changes in libdrm_freedreno to adapt the gallium driver and xf86-video-freedreno (ignoring the fbdev->KMS changes). So don't look at freedreno as an example of how to write a libdrm module or a DRM driver.. it is just an attempt to paper over a non- standard kernel driver architecture. v1: original v2: hold ref's to pending bo's (because qcom's kernel driver doesn't), various bug fixes, add ringbuffer markers so we can emit IB's to portion of ringbuffer (so that gallium driver can use a single ringbuffer for both tile cmds and draw cmds. Signed-off-by: Rob Clark <robclark@freedesktop.org>
2013-02-11intel_chipset: Merge intel-gpu-tools chipsetsBen Widawsky
Intel GPU Tools is newer and arguably better. This change doesn't completely merge the files because it's a bit simpler if we move the I9XX macro over to Intel GPU Tools, and don't move over a few macros from IGT that libdrm doesn't care about. It has been discussed, and would seem even easier if Intel GPU Tools simply used the libdrm header files. Whether or not we move to that, this should help that effort. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2013-02-06intel: fix length mask for Gen5/Gen6 3DSTATE_CLEAR_PARAMSChris Forbes
On Gen6, bit 15 is now `Depth Clear Value Valid`. This was being treated as part of the length, and failing the rest of the batchbuffer decode. Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
2013-02-06intel/aub: Actually run BLT batches on the blit ring.Kenneth Graunke
We didn't set the ring flag for BLT batches, so they got run on the render ring. Shenanigans ensued, especially when we sent commands that were only valid on the BLT ring. Signed-off-by: Kenneth Graunke <kenneth@whitecape.org> Reviewed-by: Eric Anholt <eric@anholt.net>
2013-02-05configure.ac: bump version to 2.4.42 for releaseMaarten Lankhorst
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
2013-02-05libdrm: remove DISTCHECK_CONFIGURE_FLAGSMaarten Lankhorst
I'm fairly sure the extra flags it specifies no longer exist, so there is no point in keeping it. It only adds a warning when running make distcheck. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
2013-02-04radeon: add OLAND pci idsAlex Deucher
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-02-04radeon: add OLAND familyAlex Deucher
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-02-02intel: add more VLV PCI IDsJesse Barnes
2013-01-25man: Fix typo and use $() for make expressionsThierry Reding
Due to the typo, none of the .xml files would end up in the release tarball and cause make distcheck as well as builds from the tarball to fail. Using $() isn't strictly necessary but other variables and expressions use that variant already so it makes the usage consistent. Reviewed-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2013-01-18radeon: Fix 1D tiling layout on SI.Michel Dänzer
Very similar to Evergreen, but slightly different rules for tile / slice alignment. Fortunately, these map quite naturally onto the previous fixes for linear aligned layout on SI. 2D tiling still needs more work here and possibly in the kernel. Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
2013-01-16man: fix manpage build instructionsDavid Herrmann
This fixes all the out-of-tree build-failures with manpages and uses a .man_fixup file to avoid overriding man-pages on every build. Manpages are only built if xsltproc is found and the stylesheets are available locally. You can disable building manpages with --disable-manpages so the quite expensive xsltproc procedure can be skipped. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
2013-01-16nouveau: use @PACKAGE_VERSION@ in libdrm_nouveau.pcMaarten Lankhorst
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
2013-01-16configure.ac: bump version to 2.4.41 for releaseMaarten Lankhorst
2013-01-16nouveau: expose channel engine selection on kepler chipsetsBen Skeggs
v2: Take Maarten Lankhorst's suggestion of nesting the struct to prevent sizeof() issues due to padding on older revisions. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
2013-01-14libdrm_nouveau.pc: don't include I${includedir}/nouveauMarcin Slusarz
Nouveau headers are installed in I${includedir}/libdrm.
2013-01-13intel: Remove the fence count contributions when clearing relocsChris Wilson
As we clear the relocs from the bo, we also need to clear the contribution of the reloc_target_bo from the fence count. Otherwise they are leaked and prevent any further relocations being added to the bo.
2013-01-09man: disable man page building until David saves us allJesse Barnes
I must have botched something in the push of the xml switchover, since I now get errors when building the pages and aliases. Just disable for now.
2013-01-09man: add drm-memory overview pageDavid Herrmann
This adds an overview page that describes Dumb-Buffers, TTM and GEM. It does not describe chipset-specific features. You should do that in the driver-manpages. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2013-01-09man: add drm-kms overview pageDavid Herrmann
This is an overview page for KMS. It is again targeted at novice users that need redirection to the correct function man-pages. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2013-01-09man: add drm.7 overview pageDavid Herrmann
The drm.xml file compiles to drm.7 and is meant as a global overview page for libdrm. It is targeted to new users of libdrm and redirects to all other main man-pages. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2013-01-09man: convert manpages to XML instead of plain troffDavid Herrmann
If we want to use the manpages in external documentation other than normal manpages, we should rather use XML. Furthermore, almost no-one knows troff today, anyway, and XML allows others to easily add more pages without having to learn troff. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
2013-01-07nouveau: disallow pushbuf BOs in multiple memory typesBen Skeggs
Under certain circumstances it's possible for libdrm to decide to move a GART|VRAM pushbuf to be VRAM-only. This causes the kernel to reject the command submission on GF8 and up, due to a stricter policy where buffers are only allowed to move to memory types that were specified at creation time. The simplest fix for this is to force the creation-time memory type for the lifetime of the push buffer. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-01-02libkms: return -EINVAL on fstat errorMaxime Villard
On error fstat return -1, instead return -EINVAL to caller Signed-off-by: Maxime Villard <rustyBSD@gmx.fr> Signed-off-by: Jerome Glisse <jglisse@redhat.com>
2013-01-02libkms: fix memory leak in error pathMaxime Villard
Signed-off-by: Maxime Villard <rustyBSD@gmx.fr> Signed-off-by: Jerome Glisse <jglisse@redhat.com>
2012-11-28drm/radeon: track global bo name and always return the sameJerome Glisse
To avoid kernel rejecting cs if we return different global name for same bo keep track of global name and always return the same. Seems to fix issue with suspend/resume failing and repeatly printing following message : [drm:radeon_cs_ioctl] *ERROR* Failed to parse relocation -35! There might still be way for a rogue program to trigger this issue. Signed-off-by: Jerome Glisse <jglisse@redhat.com>
2012-11-21radeon: add new SI pci idAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
2012-11-10intel: Fix missing ETIME on BSD operating systemsDavid Shao
Originally posted to Free Desktop bug #52549 by David Shao. Resolves Gentoo Bug #433403. Commit message by Richard Yao. Reviewed-by: Richard Yao <ryao@gentoo.org> Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> References: https://bugs.freedesktop.org/show_bug.cgi?id=52549 Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2012-11-06configure.ac: bump version to 2.4.40 for releaseMarek Olšák
2012-11-05fix make distcheckDave Airlie
typo, Reported-by: mareko on irc Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-10-26radeon: fix tile_split of 128-bit surface formats with 8x MSAAMarek Olšák
The calculation led to the number 8192, which is too high. Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2012-10-24radeon: fix unused-function warningAndreas Boll
radeon_cs_gem.c:333:13: warning: 'cs_gem_dump_bof' defined but not used [-Wunused-function] Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2012-10-16radeon: add some new SI pci idsAlex Deucher
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-10-14initialize width/height fields in drmModeCrtcRob Clark
If we have valid timings, we can at least set width/height to *something*, which is I think at least less confusing than always seeing width/height of zero. At least modeprint and modetest seem to expect width/height to mean something. Signed-off-by: Rob Clark <rob@ti.com>
2012-10-09update gitignoreRob Clark
Signed-off-by: Rob Clark <rob@ti.com>
2012-10-09omap: release lock also on error pathsVincent Penquerc'h
Signed-off-by: Rob Clark <rob@ti.com>
2012-10-08configure.ac: Allow forcible disabling of Cairo supportDaniel Stone
We don't want to build libdrm tests with Cairo support under Poky, since they're never used and also cause a build loop from libdrm -> cairo -> mesa-dri -> libdrm. To avoid variance in build results, introduce a --disable-cairo-tests switch. Signed-off-by: Daniel Stone <daniel@fooishbar.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-10-07intel: Silence a trivial compiler warningChris Wilson
intel_bufmgr_gem.c: In function 'drm_intel_bo_gem_export_to_prime': intel_bufmgr_gem.c:2477:6: warning: unused variable 'ret' [-Wunused-variable] Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2012-10-07intel: Correct the word decoding for gen2 3DSTATE_LOAD_STATE_IMMEDIATE_1Chris Wilson
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2012-10-07intel: Fix "properly test for HAS_LLC"Chris Wilson
commit 92fd0ce4f659d7b0680543e9e5b96a3c7737a5f3 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Fri Aug 31 11:16:53 2012 +0200 intel: properly test for HAS_LLC missed slightly and in effect had no effect on the outcome of checking whether the kernel/chipset supported LLC. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2012-10-06radeon: fix stencil miptree allocation of combined ZS buffers on EG and SIMarek Olšák
This allows texturing with depth-stencil buffers directly without the copy to CB. The separate miptree description for stencil is added, because the stencil mipmap offsets are not really depth offsets/4 (at least for the texture units). Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2012-10-06radeon: don't force stencil tile split to 0Marek Olšák
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2012-10-03radeon: don't take the stencil-specific codepath for buffers without stencilMarek Olšák
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2012-09-17libdrm: man page infrastructure and a few sample man pagesJesse Barnes
2012-09-14intel: Mark bo's exported to prime as not reusableKristian Høgsberg
It's the same situation as flink and we need take the same precautions. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
2012-09-13intel: add support for ValleyViewJesse Barnes
Just some PCI ID stuff to enable the right features.