summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-08-28freedreno: add support for msm drmRob Clark
This adds support for the "msm" backend, using the upstream msm drm/kms driver. Signed-off-by: Rob Clark <robclark@freedesktop.org>
2013-08-28freedreno: support either kgsl or msmRob Clark
Split out common code and backend. Current backend is for 'kgsl' android driver, but a new backend will provide support for the upstream msm drm/kms driver. Signed-off-by: Rob Clark <robclark@freedesktop.org>
2013-08-05modetest: Allocate NV buffers large enough for the two planesLaurent Pinchart
Multiple the image height by 1.5 for NV12/NV21 and by 2 for NV16/NV61 to make room for the chroma plane. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-08-05modetest: Fix line stride in SMPTE YUV packet pattern generatorLaurent Pinchart
The line stride passed to the function is expressed in bytes, there's no need to multiply it by 2. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-08-05modetest: Try all possible encoders for a connectorLaurent Pinchart
When building the pipeline, instead of using only the encoders attached to a connector, take all possible encoders into account to locate a CRTC. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-08-05modetest: Support pipes with multiple connectorsLaurent Pinchart
The -s argument can now take a list of connectors. Configure all of them in cloned mode using a single CRTC. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-08-05modetest: Rename struct connector_arg to struct pipe_argLaurent Pinchart
This prepares the code for handling multiple connectors in a single pipeline in a cloned configuration. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-08-05modetest: Split mode setting and plane setupLaurent Pinchart
There's not reason to require setting a mode to test planes. Split the two operations. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-08-05modetest: Give the CRTC ID to the -P optionLaurent Pinchart
Planes are associated with CRTCs, not connectors. Don't try to be too clever, use the CRTC ID in the -P option. This prepares for splitting CRTC and planes setup. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-08-05modetest: Store the mode in the crtc structureLaurent Pinchart
This prepares the code for the split in separate functions of CRTC and planes setup. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-08-05modetest: Store the crtc in the connector_arg structureLaurent Pinchart
This prepares the code for the split in separate functions of CRTC and planes setup. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-08-05modetest: Remove the struct connector_arg encoder fieldLaurent Pinchart
The field is no needed, make it a local variable where used. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-08-05modetest: Compute CRTC pipe number as neededLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-08-05modetest: Create a device structureLaurent Pinchart
Instead of passing the device fd and resources as global variables group them in a device structure and pass it explictly to all functions that need it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-08-05modetest: Remove the -m argumentLaurent Pinchart
The argument isn't used, remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-08-05modetest: Print the plane ID when setting up a planeLaurent Pinchart
As modetest automatically selects an unused plan, providing the plane ID allows modifying plane properties for the selected planes. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-08-05modetest: Allow specifying plane positionLaurent Pinchart
Extend the -P option to allow specifying the plane x and y offsets. The position is optional, if not specified the plane will be positioned at the center of the screen as before. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-08-05modetest: Add a command line parameter to set propertiesLaurent Pinchart
The -w parameter can be used to set a property value from the command line, using the target object ID and the property name. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-08-05modetest: Don't limit mode set and planes to two instancesLaurent Pinchart
Configuring mode on more than two connectors or two planes is perfectly valid. Support it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-08-05modetest: Retrieve all resources in one goLaurent Pinchart
Instead of retrieving resources as they are needed, retrieve them all (except property blobs) in one go at startup. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-08-05modetest: Add a command line parameter to drop master after mode setLaurent Pinchart
If the -d parameter is specified, modetest will drop master permissions after setting the mode. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-08-05modetest: Add a command line parameter to select the driverLaurent Pinchart
If the -M parameter is specified, modetest will use the requested device name instead of trying its builtin list of device names. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2013-08-05modetest: Sort command line argumentsLaurent Pinchart
The current mostly random sort order hinders code readability. Sort the options alphabetically in the code, and by group in the help message. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2013-08-05modetest: Remove extern declarations of opt(arg|ind|err|opt)Laurent Pinchart
Those variables are declared in unistd.h, there's no need to redeclare them here. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2013-08-05modetest: Fix warningsLaurent Pinchart
Enable all standard automake warnings except for -Wpointer-arith (as the test pattern generation code uses void pointer arithmetics) and fix them. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-08-01tests: add tilcdc to modetest/vbltestRob Clark
Signed-off-by: Rob Clark <robclark@freedesktop.org>
2013-07-16intel: silence valgrind warnings for unsynchronized mapsChia-I Wu
Mark the address ranges as accessible with VALGRIND_MAKE_MEM_DEFINED. Signed-off-by: Chia-I Wu <olvaffe@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-07-04libdrm: add missing DRM_CAP_TIMESTAMP_MONOTONICImre Deak
Just add the definition according the kernel's copy of drm.h Signed-off-by: Imre Deak <imre.deak@intel.com>
2013-07-02libdrm: bump to 2.4.46Dave Airlie
2013-07-02drm: add hotspot cursor interface support.Dave Airlie
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-28radeon: add kabini pci idsAlex Deucher
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-28radeon: add Bonaire pci idsAlex Deucher
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-28radeon: add CIK chip familiesAlex Deucher
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-10intel/aub: Implement a way to specify the output .aub filenameDamien Lespiau
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
2013-06-10intel/aub: Return early if we disable aub dumpsDamien Lespiau
No need to prepare the .aub header and dump in that case, it'll be done with the next call with true. Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
2013-06-10intel/aub: Sync the AUB defines with mesa'sDamien Lespiau
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
2013-06-06radeon: correct RADEON_GEM_WAIT_IDLE useMark Kettenis
RADEON_GEM_WAIT_IDLE is declared DRM_IOW but libdrm uses it with drmCommandWriteRead instead of drmCommandWrite which leads to the ioctl being unmatched and returning an error on at least OpenBSD. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
2013-06-05intel: Adding more reserved PCI IDs for Haswell.Rodrigo Vivi
At DDX commit Chris mentioned the tendency we have of finding out more PCI IDs only when users report. So Let's add all new reserved Haswell IDs. Bugzilla: http://bugs.freedesktop.org/show_bug.cgi?id=63701 Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Acked-by: Kenneth Graunke <kenneth@whitecape.org>
2013-06-05intel: Fix Haswell GT3 names.Rodrigo Vivi
When publishing first HSW ids we weren't allowed to use "GT3" codname. But this is the correct codname and Mesa is using it already. So to avoid people getting confused why in Mesa it is called GT3 and here it is called GT2_PLUS let's fix this name in a standard and correct way. Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Reviewed-by: Chad Versace <chad.versace@linux.intel.com> Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
2013-05-22modetest: Make RGB565 pwetty tooVille Syrjälä
Render the crosshairs for 565 and x888/a888 formats. v2: Use the drm format to determine cairo format Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2013-05-17freedreno: also remove from name table on bo deleteRob Clark
When adding the name tracking, I missed removing from the name table when the bo was deleted, leaving a dangling pointer. Signed-off-by: Rob Clark <robclark@freedesktop.org>
2013-05-15freedreno: add some assertsRob Clark
Things are worse if we issueibcmds with bogus gpu ptrs, so it is better to just make userspace crash when things go pear shaped. Signed-off-by: Rob Clark <robclark@freedesktop.org>
2013-05-15freedreno: add handle and name trackingRob Clark
Due to the evil userspace buffer tracking we have to do, and hacks for creating GEM buffer from fbdev/scanout, "evil-twin" fd_bo objects are problematic. So introduce hashtable tracking of bo's and dev's, to avoid getting duplicate fd_bo ptrs for the same underlying gem object, in particular when importing via flink name. Signed-off-by: Rob Clark <robclark@freedesktop.org>
2013-05-15configure.ac: bump version to 2.4.45 for releaseMarek Olšák
2013-05-15radeon: add RADEON_SURF_FMASK flag which disables 2D->1D tiling transitionMarek Olšák
Signed-off-by: Marek Olšák <maraeo@gmail.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2013-05-13radeon: add HAINAN pci idsAlex Deucher
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-05-13radeon: add HAINAN familyAlex Deucher
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-05-09drm: add qxl drm header fileDave Airlie
Now that this driver is merged add the header file. Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-04-27intel: Add support for VEBOX ring (v2)Xiang, Haihao
v2: Fix the test for has_vebox Signed-off-by: Xiang, Haihao <haihao.xiang@intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2013-04-25freedreno: add synchronization between mesa and ddxRob Clark
Super-cheezy way to synchronization between mesa and ddx.. the SET_ACTIVE ioctl gives us a way to stash a 32b # w/ a GEM bo, and GET_BUFINFO gives us a way to retrieve it. We use this to stash the timestamp of the last ISSUEIBCMDS on the buffer. To avoid an obscene amount of syscalls, we: 1) Only set the timestamp for buffers w/ an flink name, ie. only buffers shared across processes. This is enough to catch the DRI2 buffers. 2) Only set the timestamp for buffers submitted to the 3d ring and only check the timestamps on buffers submitted to the 2d ring. This should be enough to handle synchronizing of presentation blit. We could do synchronization in the other direction too, but that would be problematic if we are using the 3d ring from DDX, since client side wouldn't know this. The waiting on timestamp happens before flush, and setting of timestamp happens after flush. It is transparent to the user of libdrm_freedreno as all the tracking of buffers happens via _emit_reloc().. Signed-off-by: Rob Clark <robclark@freedesktop.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-03 11:31:19 +0000