summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-05-12R300+: fixup pixcache flushAlex Deucher
2008-05-12RS4xx: fix MCIND index maskAlex Deucher
2008-05-12RADEON: write AGP_BASE_2 on chips that support itAlex Deucher
2008-05-12R300+: fixup PURGE/FLUSH macrosAlex Deucher
2008-05-12Radeon IGP: merge RS4xx/RS6xx gart setupAlex Deucher
2008-05-12Radeon IGP: wrap MCIND accessAlex Deucher
first step in merging rs4xx/rs6xx gart setup
2008-05-12Radeon IGP: clean up registers and magic numbersAlex Deucher
2008-05-07drm: nopage compat fixup for drm_vmDave Airlie
The kernel has removed nopage so move the old nopage codepaths into a compat vm file and switch to using the fault paths. nopfn is on its way out in the future also, so we should switch to using fault for that path as well soon
2008-05-05r500: add allowed range for us config/pixsizeDave Airlie
2008-05-02nv50: enable 0x400500 bit 0 after PGRAPH exception alsoBen Skeggs
No solid idea about what these 2 bits do, but nv50 can now survive a few PGRAPH exceptions just as nv40 does :)
2008-05-02nouveau: guard against channels potentially not having a context, fix nv50Ben Skeggs
2008-05-02nouveau: disable all card interrupts when unknown PFIFO IRQ occurs.Ben Skeggs
This is possibly temporary. I can trigger an unending IRQ storm on G8x in some circumstances, and have no idea how to handle that particular PFIFO exception correctly yet.
2008-05-02nouveau: restore original NV_PFIFO_CACHES_REASSIGN value in fifo handlerBen Skeggs
Doesn't fix any issue I've seen, but is a potential issue if a FIFO IRQ occurs during channel creation/takedown.
2008-05-02nouveau: gather nsource in trap_info()Ben Skeggs
The IRQ handling stuff really is a mess.. On the TODO :)
2008-05-02nv50: PGRAPH exception handling completely different from earlier chipsBen Skeggs
2008-05-01nv50: I cave... Add nv84 initial context values.Ben Skeggs
I swore I'd actually do this properly and not go the horrible route we did with nv4x, but I won't get around to it just yet with so many *actually* interesting things to do first.. One day. Since someone already added nv86, why not!
2008-04-29i915: fix off by one in VGA save/restore of AR & CR regsJesse Barnes
Turns out it's important to save/restore AR14 in particular.
2008-04-29nouveau: NV9x cards exist as well.Maarten Maathuis
2008-04-27Use fixed sized types in new ioctlsJesse Barnes
Make both crtc and the command argument 32 bits to avoid any 32-on-64 compat issues.
2008-04-26Enum-ectomy of vblank modesetting ioctlJesse Barnes
Enum can be of pretty much any size since C leaves the choice of size up to the implementation. So avoid using it in new interfaces like the vblank pre- & post-modeset ioctl. Thanks to hch for spotting this.
2008-04-23Don't disable IRQs, just tasklets, when taking the drm lock spinlock.Thomas Hellstrom
2008-04-23Fixed unlock check on EAGAINJakob Bornecrantz
2008-04-23i915: fix for compatibility modeXiang, Haihao
2008-04-22linux-core Makefile: add GIT_REVISIONPekka Paalanen
This tries to automatically fetch a git revision string and if succeeds, it #defines GIT_REVISION string macro. Packagers can override it by 'make GIT_REVISION=foo'. Update Nouveau to use GIT_REVISION, if defined, instead of DRIVER_DATE in struct drm_driver. Signed-off-by: Pekka Paalanen <pq@iki.fi>
2008-04-22i915: gfx hw and i945gme fixes from upstreamDave Airlie
From Jesse and Zhenyu originally.
2008-04-20[I915] Handle tiled buffers in vblank taskletKeith Packard
The vblank tasklet update code must build 2D blt commands with the appropriate tiled flags.
2008-04-20On I965, use correct 3DSTATE_DRAWING_RECTANGLE command in vblankKeith Packard
The batchbuffer submission paths were fixed to use the 965-specific command, but the vblank tasklet was not. When the older version is sent, the 965 will lock up.
2008-04-14Fix buffer object map wait error.Thomas Hellstrom
Add some branch prediction hints.
2008-04-14Fix buffer object creation validation.Thomas Hellstrom
BO lock fixes.
2008-04-14Unlock the BO mutex while waiting for idle, unmapped, unfenced.Thomas Hellstrom
Move unfenced checking into idle checking. Never time out while waiting for software events like unmapped or unfenced.
2008-04-14Fix up buffer manager locking.Thomas Hellstrom
2008-04-11Save and restore dsparb and d_state regsKeith Packard
2008-04-07Missing KERNEL_VERSION macroPatrice Mandin
2008-04-07Add DragonFly BSD support for device creationHasso Tepper
DragonFly behaves just like FreeBSD in this regard.
2008-04-07nouveau: enable accelerated move to sysmemBen Skeggs
2008-04-07nouveau: enable m2mf for tt<->vram moves, fix fence_pollBen Skeggs
2008-04-06Place highmem pages last in the ttm page array.Thomas Hellstrom
2008-04-06Use clflush() when available for cache flushing.Thomas Hellstrom
2008-04-06[I915] Fix VRAM eviction.Thomas Hellstrom
2008-04-06Fix emergency allocation accounting.Thomas Hellstrom
2008-04-05nv50: primitive i2c interrupt handlerMaarten Maathuis
2008-04-03nv50: primitive display interrupt handler.Maarten Maathuis
2008-03-31nouveau: fix return from function..Dave Airlie
dude kernel moduless use kernel errors :) this fixes an oops on init when this codepath hits.
2008-03-30Initialize the fence::error member.Thomas Hellstrom
2008-03-30[i915] Report buffer state _after_ fence submission to user-space.Thomas Hellstrom
This fixes a problem where the wrong bo->fence_type was reported, and also saves some memory space. [bo core] export the drm_bo_fill_rep_arg function.
2008-03-30Don't call fence::poll during irq if there are no waiters.Thomas Hellström
2008-03-30nouveau: forgot to add a breakMaarten Maathuis
2008-03-30nouveau: Add ctx values for nv86.Maarten Maathuis
- Note that this may not work for all nv86.
2008-03-30drm/r300: fix wait interface mixupDave Airlie
This interface was defined completely wrong, however userspace has only ever used 4 values from it (0x1, 0x2, 0x3 and 0x6), so fix the interface to do what userspace actually expected but define new defines for new users to use it properly.
2008-03-29r300: Correctly translate the value for the R300_CMD_WAIT command.Oliver McFadden
Previously, the R300_CMD_WAIT command would write the passed directly to the hardware. However this is incorrect because the R300_WAIT_* values used are internal interface values that do not map directly to the hardware. The new function I have added translates the R300_WAIT_* values into appropriate values for the hardware before writing the register. Thanks to John Bridgman for pointing this out. :-)