summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-02-22i915: put ARX back into index mode before doing restoreJesse Barnes
Fixes resume from hibernate in some configurations.
2008-02-22nouveau: Remove some random (french) comment.Maarten Maathuis
2008-02-22nouveau: A single define of dma skips is more than enough.Maarten Maathuis
2008-02-22Fix one last occurance of struct _drm_i915_batchbuffer.Kristian Høgsberg
Thanks to Todd Merrill for pointing it out.
2008-02-22i915: Remove leading underscore from struct tags.Kristian Høgsberg
This matches the changes in mesa to use the system drm includes for the definitions of the drm ioctl structs.
2008-02-21Don't free irq resources until after we've unregistered the handler.Kristian Høgsberg
2008-02-21linux: Clean up vblank related resources from drm_irq_uninstall().Michel Dänzer
This fixes at least two problems: * The vblank_disable_fn timer callback could get called after the DRM was de-initialized, e.g. on X server shutdown. * Leak of vblank related resources when disabling and re-enabling the IRQ, e.g. on an X server reset.
2008-02-20fix SAREAAlan Hourihane
2008-02-20drm: add support for passing state into the suspend hooks.Dave Airlie
fix i915 driver to use state for hibernate save avoidance. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-02-16[915]: more registers for S3 (DSPCLK_GATE_D, CACHE_MODE_0, MI_ARB_STATE)Keith Packard
Failing to preserve the MI_ARB_STATE register was causing FIFO underruns on the VGA output on my HP 2510p after resume.
2008-02-16nouveau: no GART on ia64 either.Stephane Marchesin
2008-02-16nv40: actually init all tile regs.Ben Skeggs
2008-02-13i915: Add a dri2 init path that gets the lock from the dri2 sarea.Kristian Høgsberg
2008-02-13i915: Only look up dev_priv->mmio_map if it's not already set upKristian Høgsberg
2008-02-13i915: Add I915_PARAM_CHIPSET_ID param to get chipset ID.Kristian Høgsberg
2008-02-13i915: Make sarea_priv setup optional.Kristian Høgsberg
2008-02-07Restore pipeconf regs unconditionallyJesse Barnes
On many chipsets, the checks for DPLL enable or VGA mode will prevent the pipeconf regs from being restored, which could result in a blank display or X failing to come back after resume. So restore them unconditionally along with actually restoring pipe B's palette correctly.
2008-02-07Fix saveGR array sizeJesse Barnes
Make sure we have enough room for all the GR registers or we'll end up clobbering the AR index register (which should actually be harmless unless the BIOS is making an assumption about it).
2008-02-07i915: save/restore interrupt stateJesse Barnes
On resume, if the interrupt state isn't restored correctly, we may end up with a flood of unexpected or ill-timed interrupts, which could cause the kernel to disable the interrupt or vblank events to happen at the wrong time. So save/restore them properly.
2008-02-07Fix vblank enable/disable callbacksJesse Barnes
There were two problems with the existing callback code: the vblank enable callback happened multiple times per disable, making drivers more complex than they had to be, and there was a race between the final decrement of the vblank usage counter and the next enable call, which could have resulted in a put->schedule disable->get->enable->disable sequence, which would be bad. So add a new vblank_enabled array to track vblank enable on per-pipe basis, and add a lock to protect it along with the refcount + enable/disable calls to fix the race.
2008-02-05i915: Re-report breadcrumbs on poll to the fence manager,Thomas Hellstrom
since a breadcrumb may actually turn up before a corresponding fence object has been placed on the fence ring.
2008-02-04nouveau: make nv34 work every time, not just every 2nd timeStuart Bennett
And make nv30_graph_init a bit more like mmio-traces
2008-02-02nouveau: NV40 can/should now be able to run after the blob.Maarten Maathuis
- Moved the fix from the ddx to drm, because it seemed more appropriate. - Don't be shy, report if it works for you or not.
2008-01-31Add an fence_class_manager::last_queued_sequence member, since aThomas Hellstrom
sequence number may actually turn up before the corresponding fence object has been queued on the ring. Fence drivers can use this member to determine whether a sequence number must be re-reported.
2008-01-30i915: Avoid calling drm_fence_flush_old excessively.Thomas Hellstrom
2008-01-30Simplify the fencing code and differentiate between flushes andThomas Hellstrom
waiting types. Add a "command_stream_barrier" method to the bo driver.
2008-01-30nv40: some more nv67 changesBen Skeggs
With some luck the drm-side will be OK now for this chipset.
2008-01-29Add new RV380 pci idMirko
bug 14289
2008-01-28Fix hibernate save/restore of VGA attribute regsJesse Barnes
In hibernate, we may end up calling the VGA save regs function twice, so we need to make sure it's idempotent. That means leaving ARX in index mode after the first save operation. Fixes hibernate on 965.
2008-01-27drm: add initial rs690 support for drm.Maciej Cencora
This adds support for configuring the RS690 GART.
2008-01-25mach64: fix after vblank-reworkGeorge Sapountzis
don't disable vblank interrupts (similar to r128)
2008-01-24Fixup modeset ioctl number & typedef usageJesse Barnes
Should be 0x08 rather than 0xa0, and shouldn't use typedefs.
2008-01-24Merge commit 'airlied/i915-ttm-cfu'Eric Anholt
This requires updated Mesa to handle the new relocation format.
2008-01-24Remove broken 'in vblank' accountingJesse Barnes
We need to return an accurate vblank count to the callers of ->get_vblank_counter, and in the Intel case the actual frame count register isn't udpated until the next active line is displayed, so we need to return one more than the frame count register if we're currently in a vblank period. However, none of the various ways of doing this is working yet, so disable the logic for now. This may result in a few missed events, but should fix the hangs some people have seen due to the current code tripping the wraparound logic in drm_update_vblank_count.
2008-01-24i915: fix missing header when copying data from userspaceDave Airlie
2008-01-24i915 make relocs use copy from userDave Airlie
Switch relocs to using copy from user and remove index and pass buffer handles in instead.
2008-01-23Fix thinko in get_vblank_counterJesse Barnes
Should use vtotal not htotal to figure out if we're in a vblank period.
2008-01-23Fix IS_I915G macroJesse Barnes
One to many parantheses...
2008-01-23nouveau: Fix warning in nouveau_mem.cMaarten Maathuis
2008-01-23i915/flush: get the ret the right way aroundDave Airlie
2008-01-23drm/i915: add support for E7221Dave Airlie
2008-01-22Correct vblank count valueJesse Barnes
The frame count registers don't increment until the start of the next frame, so make sure we return an incremented count if called during the actual vblank period.
2008-01-22i915 irq fixesJesse Barnes
Ack the IRQs correctly (PIPExSTAT first followed by IIR). Don't read vblank counter registers on disabled pipes (might hang otherwise). And deal with flipped pipe/plane mappings if present.
2008-01-22Merge branch 'master' into vblank-rework, including mach64 supportJesse Barnes
Conflicts: linux-core/drmP.h linux-core/drm_drv.c shared-core/i915_drv.h shared-core/i915_irq.c shared-core/mga_irq.c shared-core/radeon_irq.c shared-core/via_irq.c Mostly trivial conflicts. mach64 support from Mathieu Bérard.
2008-01-22Revert "Fix pipe<->plane mapping vs. vblank handling (again)"Dave Airlie
This reverts commit bfc29606e4a818897eebca46a5e23bbe7bc3ce25. This regresses i915 here for me I can't get greater than 0.333 fps with gears
2008-01-21nouveau: don't forget NV80.Stephane Marchesin
2008-01-21nouveau: new card family for old card designs.Stephane Marchesin
2008-01-17i915: fix invalid opcode exception on cpus without clflushKyle McMartin
i915_flush_ttm was unconditionally executing a clflush instruction to (obviously) flush the cache. Instead, check if the cpu supports clflush, and if not, fall back to calling wbinvd to flush the entire cache. Signed-off-by: Kyle McMartin <kmcmartin@redhat.com>
2008-01-17Add additional explanation of DRM_BO_FLAG_CACHED_MAPPED before I forget again.Eric Anholt
2008-01-15i915: Add chipset id for Intel Integrated Graphics DeviceZhenyu Wang
This adds new chipset id in drm. Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com>