diff options
Diffstat (limited to 'shared-core')
| -rw-r--r-- | shared-core/drm.h | 108 | ||||
| -rw-r--r-- | shared-core/i915_dma.c | 145 | ||||
| -rw-r--r-- | shared-core/i915_drv.h | 666 | ||||
| -rw-r--r-- | shared-core/i915_init.c | 313 | ||||
| -rw-r--r-- | shared-core/i915_irq.c | 15 |
5 files changed, 1103 insertions, 144 deletions
diff --git a/shared-core/drm.h b/shared-core/drm.h index b4195419..0f4a878b 100644 --- a/shared-core/drm.h +++ b/shared-core/drm.h @@ -282,7 +282,8 @@ typedef enum drm_map_flags { _DRM_KERNEL = 0x08, /**< kernel requires access */ _DRM_WRITE_COMBINING = 0x10, /**< use write-combining if available */ _DRM_CONTAINS_LOCK = 0x20, /**< SHM page that contains lock */ - _DRM_REMOVABLE = 0x40 /**< Removable mapping */ + _DRM_REMOVABLE = 0x40, /**< Removable mapping */ + _DRM_DRIVER = 0x80 /**< Driver will take care of it */ } drm_map_flags_t; typedef struct drm_ctx_priv_map { @@ -882,6 +883,99 @@ typedef union drm_mm_init_arg{ } rep; } drm_mm_init_arg_t; +/* + * Drm mode setting + */ +#define DRM_DISPLAY_INFO_LEN 32 +#define DRM_OUTPUT_NAME_LEN 32 +#define DRM_DISPLAY_MODE_LEN 32 + +struct drm_mode_modeinfo { + + unsigned int id; + + unsigned int clock; + unsigned short hdisplay, hsync_start, hsync_end, htotal, hskew; + unsigned short vdisplay, vsync_start, vsync_end, vtotal, vscan; + + unsigned int vrefresh; /* vertical refresh * 1000 */ + + unsigned int flags; + + char name[DRM_DISPLAY_MODE_LEN]; +}; + +struct drm_mode_card_res { + + int count_fbs; + unsigned int __user *fb_id; + + int count_crtcs; + unsigned int __user *crtc_id; + + int count_outputs; + unsigned int __user *output_id; + + int count_modes; + struct drm_mode_modeinfo __user *modes; + +}; + +struct drm_mode_crtc { + unsigned int crtc_id; /**< Id */ + unsigned int fb_id; /**< Id of framebuffer */ + + int x, y; /**< Position on the frameuffer */ + + unsigned int mode; /**< Current mode used */ + + int count_outputs; + unsigned int outputs; /**< Outputs that are connected */ + + int count_possibles; + unsigned int possibles; /**< Outputs that can be connected */ + + unsigned int __user *set_outputs; /**< Outputs to be connected */ + + int gamma_size; + +}; + +struct drm_mode_get_output { + + unsigned int output; /**< Id */ + unsigned int crtc; /**< Id of crtc */ + unsigned char name[DRM_OUTPUT_NAME_LEN]; + + unsigned int connection; + unsigned int mm_width, mm_height; /**< HxW in millimeters */ + unsigned int subpixel; + + int count_crtcs; + unsigned int crtcs; /**< possible crtc to connect to */ + + int count_clones; + unsigned int clones; /**< list of clones */ + + int count_modes; + unsigned int __user *modes; /**< list of modes it supports */ + +}; + +struct drm_mode_fb_cmd { + unsigned int buffer_id; + unsigned int width, height; + unsigned int pitch; + unsigned int bpp; + unsigned int handle; + unsigned int depth; +}; + +struct drm_mode_mode_cmd { + unsigned int output_id; + unsigned int mode_id; +}; + /** * \name Ioctls Definitions */ @@ -953,6 +1047,18 @@ typedef union drm_mm_init_arg{ #define DRM_IOCTL_UPDATE_DRAW DRM_IOW(0x3f, drm_update_draw_t) +#define DRM_IOCTL_MODE_GETRESOURCES DRM_IOWR(0xA0, struct drm_mode_card_res) +#define DRM_IOCTL_MODE_GETCRTC DRM_IOWR(0xA1, struct drm_mode_crtc) +#define DRM_IOCTL_MODE_GETOUTPUT DRM_IOWR(0xA2, struct drm_mode_get_output) +#define DRM_IOCTL_MODE_SETCRTC DRM_IOWR(0xA3, struct drm_mode_crtc) +#define DRM_IOCTL_MODE_ADDFB DRM_IOWR(0xA4, struct drm_mode_fb_cmd) +#define DRM_IOCTL_MODE_RMFB DRM_IOWR(0xA5, unsigned int) +#define DRM_IOCTL_MODE_GETFB DRM_IOWR(0xA6, struct drm_mode_fb_cmd) + +#define DRM_IOCTL_MODE_ADDMODE DRM_IOWR(0xA7, struct drm_mode_modeinfo) +#define DRM_IOCTL_MODE_RMMODE DRM_IOWR(0xA8, unsigned int) +#define DRM_IOCTL_MODE_ATTACHMODE DRM_IOWR(0xA9, struct drm_mode_mode_cmd) +#define DRM_IOCTL_MODE_DETACHMODE DRM_IOWR(0xAA, struct drm_mode_mode_cmd) /*@}*/ /** diff --git a/shared-core/i915_dma.c b/shared-core/i915_dma.c index dbc5f959..c95f1857 100644 --- a/shared-core/i915_dma.c +++ b/shared-core/i915_dma.c @@ -31,17 +31,6 @@ #include "i915_drm.h" #include "i915_drv.h" -#define IS_I965G(dev) (dev->pci_device == 0x2972 || \ - dev->pci_device == 0x2982 || \ - dev->pci_device == 0x2992 || \ - dev->pci_device == 0x29A2 || \ - dev->pci_device == 0x2A02 || \ - dev->pci_device == 0x2A12) - -#define IS_G33(dev) (dev->pci_device == 0x29C2 || \ - dev->pci_device == 0x29B2 || \ - dev->pci_device == 0x29D2) - /* Really want an OS-independent resettable timer. Would like to have * this loop run for (eg) 3 sec, but have the timer reset every time * the head pointer changes, so that EBUSY only happens if the ring @@ -98,30 +87,6 @@ static int i915_dma_cleanup(drm_device_t * dev) if (dev->irq) drm_irq_uninstall(dev); - if (dev->dev_private) { - drm_i915_private_t *dev_priv = - (drm_i915_private_t *) dev->dev_private; - - if (dev_priv->ring.virtual_start) { - drm_core_ioremapfree(&dev_priv->ring.map, dev); - } - - if (dev_priv->status_page_dmah) { - drm_pci_free(dev, dev_priv->status_page_dmah); - /* Need to rewrite hardware status page */ - I915_WRITE(0x02080, 0x1ffff000); - } - if (dev_priv->status_gfx_addr) { - dev_priv->status_gfx_addr = 0; - drm_core_ioremapfree(&dev_priv->hws_map, dev); - I915_WRITE(0x02080, 0x1ffff000); - } - drm_free(dev->dev_private, sizeof(drm_i915_private_t), - DRM_MEM_DRIVER); - - dev->dev_private = NULL; - } - return 0; } @@ -147,32 +112,6 @@ static int i915_initialize(drm_device_t * dev, return DRM_ERR(EINVAL); } - dev_priv->sarea_priv = (drm_i915_sarea_t *) - ((u8 *) dev_priv->sarea->handle + init->sarea_priv_offset); - - dev_priv->ring.Start = init->ring_start; - dev_priv->ring.End = init->ring_end; - dev_priv->ring.Size = init->ring_size; - dev_priv->ring.tail_mask = dev_priv->ring.Size - 1; - - dev_priv->ring.map.offset = init->ring_start; - dev_priv->ring.map.size = init->ring_size; - dev_priv->ring.map.type = 0; - dev_priv->ring.map.flags = 0; - dev_priv->ring.map.mtrr = 0; - - drm_core_ioremap(&dev_priv->ring.map, dev); - - if (dev_priv->ring.map.handle == NULL) { - dev->dev_private = (void *)dev_priv; - i915_dma_cleanup(dev); - DRM_ERROR("can not ioremap virtual address for" - " ring buffer\n"); - return DRM_ERR(ENOMEM); - } - - dev_priv->ring.virtual_start = dev_priv->ring.map.handle; - dev_priv->cpp = init->cpp; dev_priv->sarea_priv->pf_current_page = 0; @@ -189,25 +128,6 @@ static int i915_initialize(drm_device_t * dev, */ dev_priv->vblank_pipe = DRM_I915_VBLANK_PIPE_A; - /* Program Hardware Status Page */ - if (!IS_G33(dev)) { - dev_priv->status_page_dmah = - drm_pci_alloc(dev, PAGE_SIZE, PAGE_SIZE, 0xffffffff); - - if (!dev_priv->status_page_dmah) { - dev->dev_private = (void *)dev_priv; - i915_dma_cleanup(dev); - DRM_ERROR("Can not allocate hardware status page\n"); - return DRM_ERR(ENOMEM); - } - dev_priv->hw_status_page = dev_priv->status_page_dmah->vaddr; - dev_priv->dma_status_page = dev_priv->status_page_dmah->busaddr; - - memset(dev_priv->hw_status_page, 0, PAGE_SIZE); - - I915_WRITE(0x02080, dev_priv->dma_status_page); - } - DRM_DEBUG("Enabled hardware status page\n"); dev->dev_private = (void *)dev_priv; return 0; } @@ -228,32 +148,13 @@ static int i915_dma_resume(drm_device_t * dev) return DRM_ERR(EINVAL); } - if (dev_priv->ring.map.handle == NULL) { - DRM_ERROR("can not ioremap virtual address for" - " ring buffer\n"); - return DRM_ERR(ENOMEM); - } - - /* Program Hardware Status Page */ - if (!dev_priv->hw_status_page) { - DRM_ERROR("Can not find hardware status page\n"); - return DRM_ERR(EINVAL); - } - DRM_DEBUG("hw status page @ %p\n", dev_priv->hw_status_page); - - if (dev_priv->status_gfx_addr != 0) - I915_WRITE(0x02080, dev_priv->status_gfx_addr); - else - I915_WRITE(0x02080, dev_priv->dma_status_page); - DRM_DEBUG("Enabled hardware status page\n"); - return 0; } static int i915_dma_init(DRM_IOCTL_ARGS) { DRM_DEVICE; - drm_i915_private_t *dev_priv; + drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; drm_i915_init_t init; int retcode = 0; @@ -262,10 +163,6 @@ static int i915_dma_init(DRM_IOCTL_ARGS) switch (init.func) { case I915_INIT_DMA: - dev_priv = drm_alloc(sizeof(drm_i915_private_t), - DRM_MEM_DRIVER); - if (dev_priv == NULL) - return DRM_ERR(ENOMEM); retcode = i915_initialize(dev, dev_priv, &init); break; case I915_CLEANUP_DMA: @@ -932,43 +829,13 @@ static int i915_set_status_page(DRM_IOCTL_ARGS) dev_priv->hw_status_page = dev_priv->hws_map.handle; memset(dev_priv->hw_status_page, 0, PAGE_SIZE); - I915_WRITE(0x02080, dev_priv->status_gfx_addr); + I915_WRITE(I915REG_HWS_PGA, dev_priv->status_gfx_addr); DRM_DEBUG("load hws 0x2080 with gfx mem 0x%x\n", dev_priv->status_gfx_addr); DRM_DEBUG("load hws at %p\n", dev_priv->hw_status_page); return 0; } -int i915_driver_load(drm_device_t *dev, unsigned long flags) -{ - /* i915 has 4 more counters */ - dev->counters += 4; - dev->types[6] = _DRM_STAT_IRQ; - dev->types[7] = _DRM_STAT_PRIMARY; - dev->types[8] = _DRM_STAT_SECONDARY; - dev->types[9] = _DRM_STAT_DMA; - - return 0; -} - -void i915_driver_lastclose(drm_device_t * dev) -{ - if (dev->dev_private) { - drm_i915_private_t *dev_priv = dev->dev_private; - i915_do_cleanup_pageflip(dev); - i915_mem_takedown(&(dev_priv->agp_heap)); - } - i915_dma_cleanup(dev); -} - -void i915_driver_preclose(drm_device_t * dev, DRMFILE filp) -{ - if (dev->dev_private) { - drm_i915_private_t *dev_priv = dev->dev_private; - i915_mem_release(dev, filp, dev_priv->agp_heap); - } -} - drm_ioctl_desc_t i915_ioctls[] = { [DRM_IOCTL_NR(DRM_I915_INIT)] = {i915_dma_init, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY}, [DRM_IOCTL_NR(DRM_I915_FLUSH)] = {i915_flush_ioctl, DRM_AUTH}, @@ -1008,10 +875,4 @@ int i915_driver_device_is_agp(drm_device_t * dev) return 1; } -int i915_driver_firstopen(struct drm_device *dev) -{ -#ifdef I915_HAVE_BUFFER - drm_bo_driver_init(dev); -#endif - return 0; -} + diff --git a/shared-core/i915_drv.h b/shared-core/i915_drv.h index e0432996..35451feb 100644 --- a/shared-core/i915_drv.h +++ b/shared-core/i915_drv.h @@ -89,9 +89,13 @@ typedef struct _drm_i915_vbl_swap { } drm_i915_vbl_swap_t; typedef struct drm_i915_private { + drm_buffer_object_t *ring_buffer; drm_local_map_t *sarea; drm_local_map_t *mmio_map; + unsigned long mmiobase; + unsigned long mmiolen; + drm_i915_sarea_t *sarea_priv; drm_i915_ring_buffer_t ring; @@ -132,6 +136,67 @@ typedef struct drm_i915_private { spinlock_t swaps_lock; drm_i915_vbl_swap_t vbl_swaps; unsigned int swaps_pending; + + /* LVDS info */ + int backlight_duty_cycle; /* restore backlight to this value */ + bool panel_wants_dither; + struct drm_display_mode *panel_fixed_mode; + + /* Register state */ + u32 saveDSPACNTR; + u32 saveDSPBCNTR; + u32 savePIPEACONF; + u32 savePIPEBCONF; + u32 savePIPEASRC; + u32 savePIPEBSRC; + u32 saveFPA0; + u32 saveFPA1; + u32 saveDPLL_A; + u32 saveDPLL_A_MD; + u32 saveHTOTAL_A; + u32 saveHBLANK_A; + u32 saveHSYNC_A; + u32 saveVTOTAL_A; + u32 saveVBLANK_A; + u32 saveVSYNC_A; + u32 saveDSPASTRIDE; + u32 saveDSPASIZE; + u32 saveDSPAPOS; + u32 saveDSPABASE; + u32 saveDSPASURF; + u32 saveFPB0; + u32 saveFPB1; + u32 saveDPLL_B; + u32 saveDPLL_B_MD; + u32 saveHTOTAL_B; + u32 saveHBLANK_B; + u32 saveHSYNC_B; + u32 saveVTOTAL_B; + u32 saveVBLANK_B; + u32 saveVSYNC_B; + u32 saveDSPBSTRIDE; + u32 saveDSPBSIZE; + u32 saveDSPBPOS; + u32 saveDSPBBASE; + u32 saveDSPBSURF; + u32 saveVCLK_DIVISOR_VGA0; + u32 saveVCLK_DIVISOR_VGA1; + u32 saveVCLK_POST_DIV; + u32 saveVGACNTRL; + u32 saveADPA; + u32 saveLVDS; + u32 saveDVOA; + u32 saveDVOB; + u32 saveDVOC; + u32 savePP_ON; + u32 savePP_OFF; + u32 savePP_CONTROL; + u32 savePP_CYCLE; + u32 savePFIT_CONTROL; + u32 savePaletteA[256]; + u32 savePaletteB[256]; + u32 saveSWF[17]; + u32 saveBLC_PWM_CTL; } drm_i915_private_t; enum intel_chip_family { @@ -147,6 +212,8 @@ extern int i915_max_ioctl; /* i915_dma.c */ extern void i915_kernel_lost_context(drm_device_t * dev); extern int i915_driver_load(struct drm_device *, unsigned long flags); +extern int i915_driver_unload(drm_device_t *dev); +extern int i915_driver_firstopen(struct drm_device *dev); extern void i915_driver_lastclose(drm_device_t * dev); extern void i915_driver_preclose(drm_device_t * dev, DRMFILE filp); extern int i915_driver_device_is_agp(drm_device_t * dev); @@ -156,11 +223,13 @@ extern void i915_emit_breadcrumb(drm_device_t *dev); extern void i915_dispatch_flip(drm_device_t * dev, int pipes, int sync); extern int i915_emit_mi_flush(drm_device_t *dev, uint32_t flush); extern int i915_driver_firstopen(struct drm_device *dev); +extern int i915_dma_cleanup(drm_device_t * dev); /* i915_irq.c */ extern int i915_irq_emit(DRM_IOCTL_ARGS); extern int i915_irq_wait(DRM_IOCTL_ARGS); +extern void i915_driver_wait_next_vblank(drm_device_t *dev, int pipe); extern int i915_driver_vblank_wait(drm_device_t *dev, unsigned int *sequence); extern int i915_driver_vblank_wait2(drm_device_t *dev, unsigned int *sequence); extern irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS); @@ -172,6 +241,7 @@ extern int i915_vblank_pipe_get(DRM_IOCTL_ARGS); extern int i915_emit_irq(drm_device_t * dev); extern void i915_user_irq_on(drm_i915_private_t *dev_priv); extern void i915_user_irq_off(drm_i915_private_t *dev_priv); +extern void i915_enable_interrupt (drm_device_t *dev); extern int i915_vblank_swap(DRM_IOCTL_ARGS); /* i915_mem.c */ @@ -208,6 +278,12 @@ extern int i915_move(drm_buffer_object_t *bo, int evict, #endif + +/* modesetting */ +extern void intel_modeset_init(drm_device_t *dev); +extern void intel_modeset_cleanup(drm_device_t *dev); + + #define I915_READ(reg) DRM_READ32(dev_priv->mmio_map, (reg)) #define I915_WRITE(reg,val) DRM_WRITE32(dev_priv->mmio_map, (reg), (val)) #define I915_READ16(reg) DRM_READ16(dev_priv->mmio_map, (reg)) @@ -245,8 +321,31 @@ extern int i915_move(drm_buffer_object_t *bo, int evict, I915_WRITE(LP_RING + RING_TAIL, outring); \ } while(0) +#define MI_NOOP (0x00 << 23) + extern int i915_wait_ring(drm_device_t * dev, int n, const char *caller); +/* + * The Bridge device's PCI config space has information about the + * fb aperture size and the amount of pre-reserved memory. + */ +#define INTEL_GMCH_CTRL 0x52 +#define INTEL_GMCH_ENABLED 0x4 +#define INTEL_GMCH_MEM_MASK 0x1 +#define INTEL_GMCH_MEM_64M 0x1 +#define INTEL_GMCH_MEM_128M 0 + +#define INTEL_855_GMCH_GMS_MASK (0x7 << 4) +#define INTEL_855_GMCH_GMS_DISABLED (0x0 << 4) +#define INTEL_855_GMCH_GMS_STOLEN_1M (0x1 << 4) +#define INTEL_855_GMCH_GMS_STOLEN_4M (0x2 << 4) +#define INTEL_855_GMCH_GMS_STOLEN_8M (0x3 << 4) +#define INTEL_855_GMCH_GMS_STOLEN_16M (0x4 << 4) +#define INTEL_855_GMCH_GMS_STOLEN_32M (0x5 << 4) + +#define INTEL_915G_GMCH_GMS_STOLEN_48M (0x6 << 4) +#define INTEL_915G_GMCH_GMS_STOLEN_64M (0x7 << 4) + #define GFX_OP_USER_INTERRUPT ((0<<29)|(2<<23)) #define GFX_OP_BREAKPOINT_INTERRUPT ((0<<29)|(1<<23)) #define CMD_REPORT_HEAD (7<<23) @@ -263,6 +362,7 @@ extern int i915_wait_ring(drm_device_t * dev, int n, const char *caller); #define BB1_UNPROTECTED (0<<0) #define BB2_END_ADDR_MASK (~0x7) +#define I915REG_HWS_PGA 0x02080 #define I915REG_HWSTAM 0x02098 #define I915REG_INT_IDENTITY_R 0x020a4 #define I915REG_INT_MASK_R 0x020a8 @@ -275,6 +375,63 @@ extern int i915_wait_ring(drm_device_t * dev, int n, const char *caller); #define I915_VBLANK_INTERRUPT_ENABLE (1UL<<17) #define I915_VBLANK_CLEAR (1UL<<1) +#define GPIOA 0x5010 +#define GPIOB 0x5014 +#define GPIOC 0x5018 +#define GPIOD 0x501c +#define GPIOE 0x5020 +#define GPIOF 0x5024 +#define GPIOG 0x5028 +#define GPIOH 0x502c +# define GPIO_CLOCK_DIR_MASK (1 << 0) +# define GPIO_CLOCK_DIR_IN (0 << 1) +# define GPIO_CLOCK_DIR_OUT (1 << 1) +# define GPIO_CLOCK_VAL_MASK (1 << 2) +# define GPIO_CLOCK_VAL_OUT (1 << 3) +# define GPIO_CLOCK_VAL_IN (1 << 4) +# define GPIO_CLOCK_PULLUP_DISABLE (1 << 5) +# define GPIO_DATA_DIR_MASK (1 << 8) +# define GPIO_DATA_DIR_IN (0 << 9) +# define GPIO_DATA_DIR_OUT (1 << 9) +# define GPIO_DATA_VAL_MASK (1 << 10) +# define GPIO_DATA_VAL_OUT (1 << 11) +# define GPIO_DATA_VAL_IN (1 << 12) +# define GPIO_DATA_PULLUP_DISABLE (1 << 13) + +/* p317, 319 + */ +#define VCLK2_VCO_M 0x6008 /* treat as 16 bit? (includes msbs) */ +#define VCLK2_VCO_N 0x600a +#define VCLK2_VCO_DIV_SEL 0x6012 + +#define VCLK_DIVISOR_VGA0 0x6000 +#define VCLK_DIVISOR_VGA1 0x6004 +#define VCLK_POST_DIV 0x6010 +/** Selects a post divisor of 4 instead of 2. */ +# define VGA1_PD_P2_DIV_4 (1 << 15) +/** Overrides the p2 post divisor field */ +# define VGA1_PD_P1_DIV_2 (1 << 13) +# define VGA1_PD_P1_SHIFT 8 +/** P1 value is 2 greater than this field */ +# define VGA1_PD_P1_MASK (0x1f << 8) +/** Selects a post divisor of 4 instead of 2. */ +# define VGA0_PD_P2_DIV_4 (1 << 7) +/** Overrides the p2 post divisor field */ +# define VGA0_PD_P1_DIV_2 (1 << 5) +# define VGA0_PD_P1_SHIFT 0 +/** P1 value is 2 greater than this field */ +# define VGA0_PD_P1_MASK (0x1f << 0) + +#define POST_DIV_SELECT 0x70 +#define POST_DIV_1 0x00 +#define POST_DIV_2 0x10 +#define POST_DIV_4 0x20 +#define POST_DIV_8 0x30 +#define POST_DIV_16 0x40 +#define POST_DIV_32 0x50 +#define VCO_LOOP_DIV_BY_4M 0x00 +#define VCO_LOOP_DIV_BY_16M 0x04 + #define SRX_INDEX 0x3c4 #define SRX_DATA 0x3c5 #define SR01 1 @@ -283,6 +440,8 @@ extern int i915_wait_ring(drm_device_t * dev, int n, const char *caller); #define PPCR 0x61204 #define PPCR_ON (1<<0) +#define DVOA 0x61120 +#define DVOA_ON (1<<31) #define DVOB 0x61140 #define DVOB_ON (1<<31) #define DVOC 0x61160 @@ -341,8 +500,14 @@ extern int i915_wait_ring(drm_device_t * dev, int n, const char *caller); #define SRC_COPY_BLT_CMD ((2<<29)|(0x43<<22)|4) #define XY_SRC_COPY_BLT_CMD ((2<<29)|(0x53<<22)|6) +#define XY_MONO_SRC_COPY_IMM_BLT ((2<<29)|(0x71<<22)|5) #define XY_SRC_COPY_BLT_WRITE_ALPHA (1<<21) #define XY_SRC_COPY_BLT_WRITE_RGB (1<<20) +#define BLT_DEPTH_8 (0<<24) +#define BLT_DEPTH_16_565 (1<<24) +#define BLT_DEPTH_16_1555 (2<<24) +#define BLT_DEPTH_32 (3<<24) +#define BLT_ROP_GXCOPY (0xcc<<16) #define MI_BATCH_BUFFER ((0x30<<23)|1) #define MI_BATCH_BUFFER_START (0x31<<23) @@ -368,4 +533,505 @@ extern int i915_wait_ring(drm_device_t * dev, int n, const char *caller); #define READ_BREADCRUMB(dev_priv) (((volatile u32*)(dev_priv->hw_status_page))[5]) #define READ_HWSP(dev_priv, reg) (((volatile u32*)(dev_priv->hw_status_page))[reg]) + +#define BLC_PWM_CTL 0x61254 +#define BACKLIGHT_MODULATION_FREQ_SHIFT (17) +/** + * This is the most significant 15 bits of the number of backlight cycles in a + * complete cycle of the modulated backlight control. + * + * The actual value is this field multiplied by two. + */ +#define BACKLIGHT_MODULATION_FREQ_MASK (0x7fff << 17) +#define BLM_LEGACY_MODE (1 << 16) +/** + * This is the number of cycles out of the backlight modulation cycle for which + * the backlight is on. + * + * This field must be no greater than the number of cycles in the complete + * backlight modulation cycle. + */ +#define BACKLIGHT_DUTY_CYCLE_SHIFT (0) +#define BACKLIGHT_DUTY_CYCLE_MASK (0xffff) + +#define I915_GCFGC 0xf0 +#define I915_LOW_FREQUENCY_ENABLE (1 << 7) +#define I915_DISPLAY_CLOCK_190_200_MHZ (0 << 4) +#define I915_DISPLAY_CLOCK_333_MHZ (4 << 4) +#define I915_DISPLAY_CLOCK_MASK (7 << 4) + +#define I855_HPLLCC 0xc0 +#define I855_CLOCK_CONTROL_MASK (3 << 0) +#define I855_CLOCK_133_200 (0 << 0) +#define I855_CLOCK_100_200 (1 << 0) +#define I855_CLOCK_100_133 (2 << 0) +#define I855_CLOCK_166_250 (3 << 0) + +/* I830 CRTC registers */ +#define HTOTAL_A 0x60000 +#define HBLANK_A 0x60004 +#define HSYNC_A 0x60008 +#define VTOTAL_A 0x6000c +#define VBLANK_A 0x60010 +#define VSYNC_A 0x60014 +#define PIPEASRC 0x6001c +#define BCLRPAT_A 0x60020 +#define VSYNCSHIFT_A 0x60028 + +#define HTOTAL_B 0x61000 +#define HBLANK_B 0x61004 +#define HSYNC_B 0x61008 +#define VTOTAL_B 0x6100c +#define VBLANK_B 0x61010 +#define VSYNC_B 0x61014 +#define PIPEBSRC 0x6101c +#define BCLRPAT_B 0x61020 +#define VSYNCSHIFT_B 0x61028 + +#define PP_STATUS 0x61200 +# define PP_ON (1 << 31) +/** + * Indicates that all dependencies of the panel are on: + * + * - PLL enabled + * - pipe enabled + * - LVDS/DVOB/DVOC on + */ +# define PP_READY (1 << 30) +# define PP_SEQUENCE_NONE (0 << 28) +# define PP_SEQUENCE_ON (1 << 28) +# define PP_SEQUENCE_OFF (2 << 28) +# define PP_SEQUENCE_MASK 0x30000000 +#define PP_CONTROL 0x61204 +# define POWER_TARGET_ON (1 << 0) + +#define LVDSPP_ON 0x61208 +#define LVDSPP_OFF 0x6120c +#define PP_CYCLE 0x61210 + +#define PFIT_CONTROL 0x61230 +# define PFIT_ENABLE (1 << 31) +# define PFIT_PIPE_MASK (3 << 29) +# define PFIT_PIPE_SHIFT 29 +# define VERT_INTERP_DISABLE (0 << 10) +# define VERT_INTERP_BILINEAR (1 << 10) +# define VERT_INTERP_MASK (3 << 10) +# define VERT_AUTO_SCALE (1 << 9) +# define HORIZ_INTERP_DISABLE (0 << 6) +# define HORIZ_INTERP_BILINEAR (1 << 6) +# define HORIZ_INTERP_MASK (3 << 6) +# define HORIZ_AUTO_SCALE (1 << 5) +# define PANEL_8TO6_DITHER_ENABLE (1 << 3) + +#define PFIT_PGM_RATIOS 0x61234 +# define PFIT_VERT_SCALE_MASK 0xfff00000 +# define PFIT_HORIZ_SCALE_MASK 0x0000fff0 + +#define PFIT_AUTO_RATIOS 0x61238 + + +#define DPLL_A 0x06014 +#define DPLL_B 0x06018 +# define DPLL_VCO_ENABLE (1 << 31) +# define DPLL_DVO_HIGH_SPEED (1 << 30) +# define DPLL_SYNCLOCK_ENABLE (1 << 29) +# define DPLL_VGA_MODE_DIS (1 << 28) +# define DPLLB_MODE_DAC_SERIAL (1 << 26) /* i915 */ +# define DPLLB_MODE_LVDS (2 << 26) /* i915 */ +# define DPLL_MODE_MASK (3 << 26) +# define DPLL_DAC_SERIAL_P2_CLOCK_DIV_10 (0 << 24) /* i915 */ +# define DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 (1 << 24) /* i915 */ +# define DPLLB_LVDS_P2_CLOCK_DIV_14 (0 << 24) /* i915 */ +# define DPLLB_LVDS_P2_CLOCK_DIV_7 (1 << 24) /* i915 */ +# define DPLL_P2_CLOCK_DIV_MASK 0x03000000 /* i915 */ +# define DPLL_FPA01_P1_POST_DIV_MASK 0x00ff0000 /* i915 */ +/** + * The i830 generation, in DAC/serial mode, defines p1 as two plus this + * bitfield, or just 2 if PLL_P1_DIVIDE_BY_TWO is set. + */ +# define DPLL_FPA01_P1_POST_DIV_MASK_I830 0x001f0000 +/** + * The i830 generation, in LVDS mode, defines P1 as the bit number set within + * this field (only one bit may be set). + */ +# define DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS 0x003f0000 +# define DPLL_FPA01_P1_POST_DIV_SHIFT 16 +# define PLL_P2_DIVIDE_BY_4 (1 << 23) /* i830, required in DVO non-gang */ +# define PLL_P1_DIVIDE_BY_TWO (1 << 21) /* i830 */ +# define PLL_REF_INPUT_DREFCLK (0 << 13) +# define PLL_REF_INPUT_TVCLKINA (1 << 13) /* i830 */ +# define PLL_REF_INPUT_TVCLKINBC (2 << 13) /* SDVO TVCLKIN */ +# define PLLB_REF_INPUT_SPREADSPECTRUMIN (3 << 13) +# define PLL_REF_INPUT_MASK (3 << 13) +# define PLL_LOAD_PULSE_PHASE_SHIFT 9 +/* + * Parallel to Serial Load Pulse phase selection. + * Selects the phase for the 10X DPLL clock for the PCIe + * digital display port. The range is 4 to 13; 10 or more + * is just a flip delay. The default is 6 + */ +# define PLL_LOAD_PULSE_PHASE_MASK (0xf << PLL_LOAD_PULSE_PHASE_SHIFT) +# define DISPLAY_RATE_SELECT_FPA1 (1 << 8) + +/** + * SDVO multiplier for 945G/GM. Not used on 965. + * + * \sa DPLL_MD_UDI_MULTIPLIER_MASK + */ +# define SDVO_MULTIPLIER_MASK 0x000000ff +# define SDVO_MULTIPLIER_SHIFT_HIRES 4 +# define SDVO_MULTIPLIER_SHIFT_VGA 0 + +/** @defgroup DPLL_MD + * @{ + */ +/** Pipe A SDVO/UDI clock multiplier/divider register for G965. */ +#define DPLL_A_MD 0x0601c +/** Pipe B SDVO/UDI clock multiplier/divider register for G965. */ +#define DPLL_B_MD 0x06020 +/** + * UDI pixel divider, controlling how many pixels are stuffed into a packet. + * + * Value is pixels minus 1. Must be set to 1 pixel for SDVO. + */ +# define DPLL_MD_UDI_DIVIDER_MASK 0x3f000000 +# define DPLL_MD_UDI_DIVIDER_SHIFT 24 +/** UDI pixel divider for VGA, same as DPLL_MD_UDI_DIVIDER_MASK. */ +# define DPLL_MD_VGA_UDI_DIVIDER_MASK 0x003f0000 +# define DPLL_MD_VGA_UDI_DIVIDER_SHIFT 16 +/** + * SDVO/UDI pixel multiplier. + * + * SDVO requires that the bus clock rate be between 1 and 2 Ghz, and the bus + * clock rate is 10 times the DPLL clock. At low resolution/refresh rate + * modes, the bus rate would be below the limits, so SDVO allows for stuffing + * dummy bytes in the datastream at an increased clock rate, with both sides of + * the link knowing how many bytes are fill. + * + * So, for a mode with a dotclock of 65Mhz, we would want to double the clock + * rate to 130Mhz to get a bus rate of 1.30Ghz. The DPLL clock rate would be + * set to 130Mhz, and the SDVO multiplier set to 2x in this register and + * through an SDVO command. + * + * This register field has values of multiplication factor minus 1, with + * a maximum multiplier of 5 for SDVO. + */ +# define DPLL_MD_UDI_MULTIPLIER_MASK 0x00003f00 +# define DPLL_MD_UDI_MULTIPLIER_SHIFT 8 +/** SDVO/UDI pixel multiplier for VGA, same as DPLL_MD_UDI_MULTIPLIER_MASK. + * This best be set to the default value (3) or the CRT won't work. No, + * I don't entirely understand what this does... + */ +# define DPLL_MD_VGA_UDI_MULTIPLIER_MASK 0x0000003f +# define DPLL_MD_VGA_UDI_MULTIPLIER_SHIFT 0 +/** @} */ + +#define DPLL_TEST 0x606c +# define DPLLB_TEST_SDVO_DIV_1 (0 << 22) +# define DPLLB_TEST_SDVO_DIV_2 (1 << 22) +# define DPLLB_TEST_SDVO_DIV_4 (2 << 22) +# define DPLLB_TEST_SDVO_DIV_MASK (3 << 22) +# define DPLLB_TEST_N_BYPASS (1 << 19) +# define DPLLB_TEST_M_BYPASS (1 << 18) +# define DPLLB_INPUT_BUFFER_ENABLE (1 << 16) +# define DPLLA_TEST_N_BYPASS (1 << 3) +# define DPLLA_TEST_M_BYPASS (1 << 2) +# define DPLLA_INPUT_BUFFER_ENABLE (1 << 0) + +#define ADPA 0x61100 +#define ADPA_DAC_ENABLE (1<<31) +#define ADPA_DAC_DISABLE 0 +#define ADPA_PIPE_SELECT_MASK (1<<30) +#define ADPA_PIPE_A_SELECT 0 +#define ADPA_PIPE_B_SELECT (1<<30) +#define ADPA_USE_VGA_HVPOLARITY (1<<15) +#define ADPA_SETS_HVPOLARITY 0 +#define ADPA_VSYNC_CNTL_DISABLE (1<<11) +#define ADPA_VSYNC_CNTL_ENABLE 0 +#define ADPA_HSYNC_CNTL_DISABLE (1<<10) +#define ADPA_HSYNC_CNTL_ENABLE 0 +#define ADPA_VSYNC_ACTIVE_HIGH (1<<4) +#define ADPA_VSYNC_ACTIVE_LOW 0 +#define ADPA_HSYNC_ACTIVE_HIGH (1<<3) +#define ADPA_HSYNC_ACTIVE_LOW 0 + +#define FPA0 0x06040 +#define FPA1 0x06044 +#define FPB0 0x06048 +#define FPB1 0x0604c +# define FP_N_DIV_MASK 0x003f0000 +# define FP_N_DIV_SHIFT 16 +# define FP_M1_DIV_MASK 0x00003f00 +# define FP_M1_DIV_SHIFT 8 +# define FP_M2_DIV_MASK 0x0000003f +# define FP_M2_DIV_SHIFT 0 + + +#define PORT_HOTPLUG_EN 0x61110 +# define SDVOB_HOTPLUG_INT_EN (1 << 26) +# define SDVOC_HOTPLUG_INT_EN (1 << 25) +# define TV_HOTPLUG_INT_EN (1 << 18) +# define CRT_HOTPLUG_INT_EN (1 << 9) +# define CRT_HOTPLUG_FORCE_DETECT (1 << 3) + +#define PORT_HOTPLUG_STAT 0x61114 +# define CRT_HOTPLUG_INT_STATUS (1 << 11) +# define TV_HOTPLUG_INT_STATUS (1 << 10) +# define CRT_HOTPLUG_MONITOR_MASK (3 << 8) +# define CRT_HOTPLUG_MONITOR_COLOR (3 << 8) +# define CRT_HOTPLUG_MONITOR_MONO (2 << 8) +# define CRT_HOTPLUG_MONITOR_NONE (0 << 8) +# define SDVOC_HOTPLUG_INT_STATUS (1 << 7) +# define SDVOB_HOTPLUG_INT_STATUS (1 << 6) + +#define SDVOB 0x61140 +#define SDVOC 0x61160 +#define SDVO_ENABLE (1 << 31) +#define SDVO_PIPE_B_SELECT (1 << 30) +#define SDVO_STALL_SELECT (1 << 29) +#define SDVO_INTERRUPT_ENABLE (1 << 26) +/** + * 915G/GM SDVO pixel multiplier. + * + * Programmed value is multiplier - 1, up to 5x. + * + * \sa DPLL_MD_UDI_MULTIPLIER_MASK + */ +#define SDVO_PORT_MULTIPLY_MASK (7 << 23) +#define SDVO_PORT_MULTIPLY_SHIFT 23 +#define SDVO_PHASE_SELECT_MASK (15 << 19) +#define SDVO_PHASE_SELECT_DEFAULT (6 << 19) +#define SDVO_CLOCK_OUTPUT_INVERT (1 << 18) +#define SDVOC_GANG_MODE (1 << 16) +#define SDVO_BORDER_ENABLE (1 << 7) +#define SDVOB_PCIE_CONCURRENCY (1 << 3) +#define SDVO_DETECTED (1 << 2) +/* Bits to be preserved when writing */ +#define SDVOB_PRESERVE_MASK ((1 << 17) | (1 << 16) | (1 << 14)) +#define SDVOC_PRESERVE_MASK (1 << 17) + +/** @defgroup LVDS + * @{ + */ +/** + * This register controls the LVDS output enable, pipe selection, and data + * format selection. + * + * All of the clock/data pairs are force powered down by power sequencing. + */ +#define LVDS 0x61180 +/** + * Enables the LVDS port. This bit must be set before DPLLs are enabled, as + * the DPLL semantics change when the LVDS is assigned to that pipe. + */ +# define LVDS_PORT_EN (1 << 31) +/** Selects pipe B for LVDS data. Must be set on pre-965. */ +# define LVDS_PIPEB_SELECT (1 << 30) + +/** + * Enables the A0-A2 data pairs and CLKA, containing 18 bits of color data per + * pixel. + */ +# define LVDS_A0A2_CLKA_POWER_MASK (3 << 8) +# define LVDS_A0A2_CLKA_POWER_DOWN (0 << 8) +# define LVDS_A0A2_CLKA_POWER_UP (3 << 8) +/** + * Controls the A3 data pair, which contains the additional LSBs for 24 bit + * mode. Only enabled if LVDS_A0A2_CLKA_POWER_UP also indicates it should be + * on. + */ +# define LVDS_A3_POWER_MASK (3 << 6) +# define LVDS_A3_POWER_DOWN (0 << 6) +# define LVDS_A3_POWER_UP (3 << 6) +/** + * Controls the CLKB pair. This should only be set when LVDS_B0B3_POWER_UP + * is set. + */ +# define LVDS_CLKB_POWER_MASK (3 << 4) +# define LVDS_CLKB_POWER_DOWN (0 << 4) +# define LVDS_CLKB_POWER_UP (3 << 4) + +/** + * Controls the B0-B3 data pairs. This must be set to match the DPLL p2 + * setting for whether we are in dual-channel mode. The B3 pair will + * additionally only be powered up when LVDS_A3_POWER_UP is set. + */ +# define LVDS_B0B3_POWER_MASK (3 << 2) +# define LVDS_B0B3_POWER_DOWN (0 << 2) +# define LVDS_B0B3_POWER_UP (3 << 2) + +#define PIPEACONF 0x70008 +#define PIPEACONF_ENABLE (1<<31) +#define PIPEACONF_DISABLE 0 +#define PIPEACONF_DOUBLE_WIDE (1<<30) +#define I965_PIPECONF_ACTIVE (1<<30) +#define PIPEACONF_SINGLE_WIDE 0 +#define PIPEACONF_PIPE_UNLOCKED 0 +#define PIPEACONF_PIPE_LOCKED (1<<25) +#define PIPEACONF_PALETTE 0 +#define PIPEACONF_GAMMA (1<<24) +#define PIPECONF_FORCE_BORDER (1<<25) +#define PIPECONF_PROGRESSIVE (0 << 21) +#define PIPECONF_INTERLACE_W_FIELD_INDICATION (6 << 21) +#define PIPECONF_INTERLACE_FIELD_0_ONLY (7 << 21) + +#define PIPEBCONF 0x71008 +#define PIPEBCONF_ENABLE (1<<31) +#define PIPEBCONF_DISABLE 0 +#define PIPEBCONF_DOUBLE_WIDE (1<<30) +#define PIPEBCONF_DISABLE 0 +#define PIPEBCONF_GAMMA (1<<24) +#define PIPEBCONF_PALETTE 0 + +#define PIPEBGCMAXRED 0x71010 +#define PIPEBGCMAXGREEN 0x71014 +#define PIPEBGCMAXBLUE 0x71018 +#define PIPEBSTAT 0x71024 +#define PIPEBFRAMEHIGH 0x71040 +#define PIPEBFRAMEPIXEL 0x71044 + +#define DSPACNTR 0x70180 +#define DSPBCNTR 0x71180 +#define DISPLAY_PLANE_ENABLE (1<<31) +#define DISPLAY_PLANE_DISABLE 0 +#define DISPPLANE_GAMMA_ENABLE (1<<30) +#define DISPPLANE_GAMMA_DISABLE 0 +#define DISPPLANE_PIXFORMAT_MASK (0xf<<26) +#define DISPPLANE_8BPP (0x2<<26) +#define DISPPLANE_15_16BPP (0x4<<26) +#define DISPPLANE_16BPP (0x5<<26) +#define DISPPLANE_32BPP_NO_ALPHA (0x6<<26) +#define DISPPLANE_32BPP (0x7<<26) +#define DISPPLANE_STEREO_ENABLE (1<<25) +#define DISPPLANE_STEREO_DISABLE 0 +#define DISPPLANE_SEL_PIPE_MASK (1<<24) +#define DISPPLANE_SEL_PIPE_A 0 +#define DISPPLANE_SEL_PIPE_B (1<<24) +#define DISPPLANE_SRC_KEY_ENABLE (1<<22) +#define DISPPLANE_SRC_KEY_DISABLE 0 +#define DISPPLANE_LINE_DOUBLE (1<<20) +#define DISPPLANE_NO_LINE_DOUBLE 0 +#define DISPPLANE_STEREO_POLARITY_FIRST 0 +#define DISPPLANE_STEREO_POLARITY_SECOND (1<<18) +/* plane B only */ +#define DISPPLANE_ALPHA_TRANS_ENABLE (1<<15) +#define DISPPLANE_ALPHA_TRANS_DISABLE 0 +#define DISPPLANE_SPRITE_ABOVE_DISPLAYA 0 +#define DISPPLANE_SPRITE_ABOVE_OVERLAY (1) + +#define DSPABASE 0x70184 +#define DSPASTRIDE 0x70188 + +#define DSPBBASE 0x71184 +#define DSPBADDR DSPBBASE +#define DSPBSTRIDE 0x71188 + +#define DSPAKEYVAL 0x70194 +#define DSPAKEYMASK 0x70198 + +#define DSPAPOS 0x7018C /* reserved */ +#define DSPASIZE 0x70190 +#define DSPBPOS 0x7118C +#define DSPBSIZE 0x71190 + +#define DSPASURF 0x7019C +#define DSPATILEOFF 0x701A4 + +#define DSPBSURF 0x7119C +#define DSPBTILEOFF 0x711A4 + +#define VGACNTRL 0x71400 +# define VGA_DISP_DISABLE (1 << 31) +# define VGA_2X_MODE (1 << 30) +# define VGA_PIPE_B_SELECT (1 << 29) + +/* + * Some BIOS scratch area registers. The 845 (and 830?) store the amount + * of video memory available to the BIOS in SWF1. + */ + +#define SWF0 0x71410 +#define SWF1 0x71414 +#define SWF2 0x71418 +#define SWF3 0x7141c +#define SWF4 0x71420 +#define SWF5 0x71424 +#define SWF6 0x71428 + +/* + * 855 scratch registers. + */ +#define SWF00 0x70410 +#define SWF01 0x70414 +#define SWF02 0x70418 +#define SWF03 0x7041c +#define SWF04 0x70420 +#define SWF05 0x70424 +#define SWF06 0x70428 + +#define SWF10 SWF0 +#define SWF11 SWF1 +#define SWF12 SWF2 +#define SWF13 SWF3 +#define SWF14 SWF4 +#define SWF15 SWF5 +#define SWF16 SWF6 + +#define SWF30 0x72414 +#define SWF31 0x72418 +#define SWF32 0x7241c + +/* + * Overlay registers. These are overlay registers accessed via MMIO. + * Those loaded via the overlay register page are defined in i830_video.c. + */ +#define OVADD 0x30000 + +#define DOVSTA 0x30008 +#define OC_BUF (0x3<<20) + +#define OGAMC5 0x30010 +#define OGAMC4 0x30014 +#define OGAMC3 0x30018 +#define OGAMC2 0x3001c +#define OGAMC1 0x30020 +#define OGAMC0 0x30024 + +/* + * Palette registers + */ +#define PALETTE_A 0x0a000 +#define PALETTE_B 0x0a800 + +#define IS_I830(dev) ((dev)->pci_device == PCI_DEVICE_ID_INTEL_82830_CGC) +#define IS_845G(dev) ((dev)->pci_device == PCI_DEVICE_ID_INTEL_82845G_IG) +#define IS_I85X(dev) ((dev)->pci_device == PCI_DEVICE_ID_INTEL_82855GM_IG) +#define IS_I855(dev) ((dev)->pci_device == PCI_DEVICE_ID_INTEL_82855GM_IG) +#define IS_I865G(dev) ((dev)->pci_device == PCI_DEVICE_ID_INTEL_82865_IG) + +#define IS_I915G(dev) (dev->pci_device == PCI_DEVICE_ID_INTEL_82915G_IG)/* || dev->pci_device == PCI_DEVICE_ID_INTELPCI_CHIP_E7221_G)*/ +#define IS_I915GM(dev) ((dev)->pci_device == PCI_DEVICE_ID_INTEL_82915GM_IG) +#define IS_I945G(dev) ((dev)->pci_device == PCI_DEVICE_ID_INTEL_82945G_IG) +#define IS_I945GM(dev) ((dev)->pci_device == PCI_DEVICE_ID_INTEL_82945GM_IG) + +#define IS_I965G(dev) ((dev)->pci_device == 0x2972 || \ + (dev)->pci_device == 0x2982 || \ + (dev)->pci_device == 0x2992 || \ + (dev)->pci_device == 0x29A2 || \ + (dev)->pci_device == 0x2A02 || \ + (dev)->pci_device == 0x2A12) + + +#define IS_I9XX(dev) (IS_I915G(dev) || IS_I915GM(dev) || IS_I945G(dev) || \ + IS_I945GM(dev) || IS_I965G(dev)) + +#define IS_G33(dev) ((dev)->pci_device == 0x29C2 || \ + (dev)->pci_device == 0x29B2 || \ + (dev)->pci_device == 0x29D2) + +#define IS_MOBILE(dev) (IS_I830(dev) || IS_I85X(dev) || IS_I915GM(dev) || \ + IS_I945GM(dev)) + +#define PRIMARY_RINGBUFFER_SIZE (128*1024) + #endif diff --git a/shared-core/i915_init.c b/shared-core/i915_init.c new file mode 100644 index 00000000..83219e49 --- /dev/null +++ b/shared-core/i915_init.c @@ -0,0 +1,313 @@ +/* + * Copyright (c) 2007 Intel Corporation + * Jesse Barnes <jesse.barnes@intel.com> + * + * Copyright © 2002, 2003 David Dawes <dawes@xfree86.org> + * 2004 Sylvain Meyer + * + * GPL/BSD dual license + */ +#include "drmP.h" +#include "drm.h" +#include "drm_sarea.h" +#include "i915_drm.h" +#include "i915_drv.h" + +/** + * i915_probe_agp - get AGP bootup configuration + * @pdev: PCI device + * @aperture_size: returns AGP aperture configured size + * @preallocated_size: returns size of BIOS preallocated AGP space + * + * Since Intel integrated graphics are UMA, the BIOS has to set aside + * some RAM for the framebuffer at early boot. This code figures out + * how much was set aside so we can use it for our own purposes. + */ +int i915_probe_agp(struct pci_dev *pdev, unsigned long *aperture_size, + unsigned long *preallocated_size) +{ + struct pci_dev *bridge_dev; + u16 tmp = 0; + unsigned long overhead; + + bridge_dev = pci_get_bus_and_slot(0, PCI_DEVFN(0,0)); + if (!bridge_dev) { + DRM_ERROR("bridge device not found\n"); + return -1; + } + + /* Get the fb aperture size and "stolen" memory amount. */ + pci_read_config_word(bridge_dev, INTEL_GMCH_CTRL, &tmp); + pci_dev_put(bridge_dev); + + *aperture_size = 1024 * 1024; + *preallocated_size = 1024 * 1024; + + switch (pdev->device) { + case PCI_DEVICE_ID_INTEL_82830_CGC: + case PCI_DEVICE_ID_INTEL_82845G_IG: + case PCI_DEVICE_ID_INTEL_82855GM_IG: + case PCI_DEVICE_ID_INTEL_82865_IG: + if ((tmp & INTEL_GMCH_MEM_MASK) == INTEL_GMCH_MEM_64M) + *aperture_size *= 64; + else + *aperture_size *= 128; + break; + default: + /* 9xx supports large sizes, just look at the length */ + *aperture_size = pci_resource_len(pdev, 2); + break; + } + + /* + * Some of the preallocated space is taken by the GTT + * and popup. GTT is 1K per MB of aperture size, and popup is 4K. + */ + overhead = (*aperture_size / 1024) + 4096; + switch (tmp & INTEL_855_GMCH_GMS_MASK) { + case INTEL_855_GMCH_GMS_STOLEN_1M: + break; /* 1M already */ + case INTEL_855_GMCH_GMS_STOLEN_4M: + *preallocated_size *= 4; + break; + case INTEL_855_GMCH_GMS_STOLEN_8M: + *preallocated_size *= 8; + break; + case INTEL_855_GMCH_GMS_STOLEN_16M: + *preallocated_size *= 16; + break; + case INTEL_855_GMCH_GMS_STOLEN_32M: + *preallocated_size *= 32; + break; + case INTEL_915G_GMCH_GMS_STOLEN_48M: + *preallocated_size *= 48; + break; + case INTEL_915G_GMCH_GMS_STOLEN_64M: + *preallocated_size *= 64; + break; + case INTEL_855_GMCH_GMS_DISABLED: + DRM_ERROR("video memory is disabled\n"); + return -1; + default: + DRM_ERROR("unexpected GMCH_GMS value: 0x%02x\n", + tmp & INTEL_855_GMCH_GMS_MASK); + return -1; + } + *preallocated_size -= overhead; + + return 0; +} + +/** + * i915_driver_load - setup chip and create an initial config + * @dev: DRM device + * @flags: startup flags + * + * The driver load routine has to do several things: + * - drive output discovery via intel_modeset_init() + * - initialize the memory manager + * - allocate initial config memory + * - setup the DRM framebuffer with the allocated memory + */ +int i915_driver_load(drm_device_t *dev, unsigned long flags) +{ + drm_i915_private_t *dev_priv; + unsigned long agp_size, prealloc_size; + unsigned long sareapage; + int size, ret; + + dev_priv = drm_alloc(sizeof(drm_i915_private_t), DRM_MEM_DRIVER); + if (dev_priv == NULL) + return DRM_ERR(ENOMEM); + + memset(dev_priv, 0, sizeof(drm_i915_private_t)); + dev->dev_private = (void *)dev_priv; +// dev_priv->flags = flags; + + /* i915 has 4 more counters */ + dev->counters += 4; + dev->types[6] = _DRM_STAT_IRQ; + dev->types[7] = _DRM_STAT_PRIMARY; + dev->types[8] = _DRM_STAT_SECONDARY; + dev->types[9] = _DRM_STAT_DMA; + + if (IS_I9XX(dev)) { + dev_priv->mmiobase = drm_get_resource_start(dev, 0); + dev_priv->mmiolen = drm_get_resource_len(dev, 0); + dev->mode_config.fb_base = + drm_get_resource_start(dev, 2) & 0xff000000; + } else if (drm_get_resource_start(dev, 1)) { + dev_priv->mmiobase = drm_get_resource_start(dev, 1); + dev_priv->mmiolen = drm_get_resource_len(dev, 1); + dev->mode_config.fb_base = + drm_get_resource_start(dev, 0) & 0xff000000; + } else { + DRM_ERROR("Unable to find MMIO registers\n"); + return -ENODEV; + } + + DRM_DEBUG("fb_base: 0x%08lx\n", dev->mode_config.fb_base); + + ret = drm_addmap(dev, dev_priv->mmiobase, dev_priv->mmiolen, + _DRM_REGISTERS, _DRM_READ_ONLY|_DRM_DRIVER, &dev_priv->mmio_map); + if (ret != 0) { + DRM_ERROR("Cannot add mapping for MMIO registers\n"); + return ret; + } + + /* prebuild the SAREA */ + sareapage = max(SAREA_MAX, PAGE_SIZE); + ret = drm_addmap(dev, 0, sareapage, _DRM_SHM, _DRM_CONTAINS_LOCK|_DRM_DRIVER, + &dev_priv->sarea); + if (ret) { + DRM_ERROR("SAREA setup failed\n"); + return ret; + } + + init_waitqueue_head(&dev->lock.lock_queue); + + /* FIXME: assume sarea_priv is right after SAREA */ + dev_priv->sarea_priv = dev_priv->sarea->handle + sizeof(drm_sarea_t); + + /* + * Initialize the memory manager for local and AGP space + */ + drm_bo_driver_init(dev); + + i915_probe_agp(dev->pdev, &agp_size, &prealloc_size); + DRM_DEBUG("setting up %ld bytes of VRAM space\n", prealloc_size); + drm_bo_init_mm(dev, DRM_BO_MEM_VRAM, 0, prealloc_size >> PAGE_SHIFT); + + I915_WRITE(LP_RING + RING_LEN, 0); + I915_WRITE(LP_RING + RING_HEAD, 0); + I915_WRITE(LP_RING + RING_TAIL, 0); + + size = PRIMARY_RINGBUFFER_SIZE; + ret = drm_buffer_object_create(dev, size, drm_bo_type_kernel, + DRM_BO_FLAG_READ | DRM_BO_FLAG_WRITE | + DRM_BO_FLAG_MEM_VRAM | + DRM_BO_FLAG_NO_EVICT, + DRM_BO_HINT_DONT_FENCE, 0x1, 0, + &dev_priv->ring_buffer); + if (ret < 0) { + DRM_ERROR("Unable to allocate ring buffer\n"); + return -EINVAL; + } + + /* remap the buffer object properly */ + dev_priv->ring.Start = dev_priv->ring_buffer->offset; + dev_priv->ring.End = dev_priv->ring.Start + size; + dev_priv->ring.Size = size; + dev_priv->ring.tail_mask = dev_priv->ring.Size - 1; + + /* FIXME: need wrapper with PCI mem checks */ + ret = drm_mem_reg_ioremap(dev, &dev_priv->ring_buffer->mem, + (void **) &dev_priv->ring.virtual_start); + if (ret) + DRM_ERROR("error mapping ring buffer: %d\n", ret); + + DRM_DEBUG("ring start %08lX, %p, %08lX\n", dev_priv->ring.Start, + dev_priv->ring.virtual_start, dev_priv->ring.Size); + + dev_priv->sarea_priv->pf_current_page = 0; + + memset((void *)(dev_priv->ring.virtual_start), 0, dev_priv->ring.Size); + + I915_WRITE(LP_RING + RING_START, dev_priv->ring.Start); + I915_WRITE(LP_RING + RING_LEN, + ((dev_priv->ring.Size - 4096) & RING_NR_PAGES) | + (RING_NO_REPORT | RING_VALID)); + + /* We are using separate values as placeholders for mechanisms for + * private backbuffer/depthbuffer usage. + */ + dev_priv->use_mi_batchbuffer_start = 0; + + /* Allow hardware batchbuffers unless told otherwise. + */ + dev_priv->allow_batchbuffer = 1; + + /* Program Hardware Status Page */ + if (!IS_G33(dev)) { + dev_priv->status_page_dmah = + drm_pci_alloc(dev, PAGE_SIZE, PAGE_SIZE, 0xffffffff); + + if (!dev_priv->status_page_dmah) { + dev->dev_private = (void *)dev_priv; + i915_dma_cleanup(dev); + DRM_ERROR("Can not allocate hardware status page\n"); + return DRM_ERR(ENOMEM); + } + dev_priv->hw_status_page = dev_priv->status_page_dmah->vaddr; + dev_priv->dma_status_page = dev_priv->status_page_dmah->busaddr; + + memset(dev_priv->hw_status_page, 0, PAGE_SIZE); + + I915_WRITE(I915REG_HWS_PGA, dev_priv->dma_status_page); + } + DRM_DEBUG("Enabled hardware status page\n"); + + intel_modeset_init(dev); + drm_initial_config(dev, false); + + return 0; +} + +int i915_driver_unload(drm_device_t *dev) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + + if (dev_priv->status_page_dmah) { + drm_pci_free(dev, dev_priv->status_page_dmah); + dev_priv->status_page_dmah = NULL; + dev_priv->hw_status_page = NULL; + dev_priv->dma_status_page = 0; + /* Need to rewrite hardware status page */ + I915_WRITE(I915REG_HWS_PGA, 0x1ffff000); + } + + I915_WRITE(LP_RING + RING_LEN, 0); + + intel_modeset_cleanup(dev); + + drm_mem_reg_iounmap(dev, &dev_priv->ring_buffer->mem, + dev_priv->ring.virtual_start); + + DRM_DEBUG("usage is %d\n", atomic_read(&dev_priv->ring_buffer->usage)); + mutex_lock(&dev->struct_mutex); + drm_bo_usage_deref_locked(dev_priv->ring_buffer); + mutex_unlock(&dev->struct_mutex); + + if (drm_bo_clean_mm(dev, DRM_BO_MEM_VRAM)) { + DRM_ERROR("Memory manager type 3 not clean. " + "Delaying takedown\n"); + } + + drm_bo_driver_finish(dev); + + DRM_DEBUG("%p, %p\n", dev_priv->mmio_map, dev_priv->sarea); + drm_rmmap(dev, dev_priv->mmio_map); + drm_rmmap(dev, dev_priv->sarea); + + drm_free(dev_priv, sizeof(*dev_priv), DRM_MEM_DRIVER); + + dev->dev_private = NULL; + return 0; +} + +void i915_driver_lastclose(drm_device_t * dev) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + + i915_mem_takedown(&(dev_priv->agp_heap)); + + i915_dma_cleanup(dev); + +} + +void i915_driver_preclose(drm_device_t * dev, DRMFILE filp) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + i915_mem_release(dev, filp, dev_priv->agp_heap); +} + diff --git a/shared-core/i915_irq.c b/shared-core/i915_irq.c index dc00f983..98f51b2b 100644 --- a/shared-core/i915_irq.c +++ b/shared-core/i915_irq.c @@ -431,6 +431,19 @@ static int i915_driver_vblank_do_wait(drm_device_t *dev, unsigned int *sequence, return ret; } +void i915_driver_wait_next_vblank(drm_device_t *dev, int pipe) +{ + unsigned int seq; + + seq = pipe ? atomic_read(&dev->vbl_received2) + 1 : + atomic_read(&dev->vbl_received) + 1; + + if (!pipe) + i915_driver_vblank_do_wait(dev, &seq, &dev->vbl_received); + else + i915_driver_vblank_do_wait(dev, &seq, &dev->vbl_received2); +} + int i915_driver_vblank_wait(drm_device_t *dev, unsigned int *sequence) { return i915_driver_vblank_do_wait(dev, sequence, &dev->vbl_received); @@ -489,7 +502,7 @@ int i915_irq_wait(DRM_IOCTL_ARGS) return i915_wait_irq(dev, irqwait.irq_seq); } -static void i915_enable_interrupt (drm_device_t *dev) +void i915_enable_interrupt (drm_device_t *dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |