summaryrefslogtreecommitdiff
path: root/shared-core
diff options
context:
space:
mode:
Diffstat (limited to 'shared-core')
-rw-r--r--shared-core/drm.h109
-rw-r--r--shared-core/i915_dma.c136
-rw-r--r--shared-core/i915_drv.h574
-rw-r--r--shared-core/i915_init.c312
-rw-r--r--shared-core/i915_irq.c2
5 files changed, 1005 insertions, 128 deletions
diff --git a/shared-core/drm.h b/shared-core/drm.h
index b4195419..64536690 100644
--- a/shared-core/drm.h
+++ b/shared-core/drm.h
@@ -282,7 +282,8 @@ typedef enum drm_map_flags {
_DRM_KERNEL = 0x08, /**< kernel requires access */
_DRM_WRITE_COMBINING = 0x10, /**< use write-combining if available */
_DRM_CONTAINS_LOCK = 0x20, /**< SHM page that contains lock */
- _DRM_REMOVABLE = 0x40 /**< Removable mapping */
+ _DRM_REMOVABLE = 0x40, /**< Removable mapping */
+ _DRM_DRIVER = 0x80 /**< Driver will take care of it */
} drm_map_flags_t;
typedef struct drm_ctx_priv_map {
@@ -788,6 +789,7 @@ typedef struct drm_fence_arg {
typedef enum {
drm_bo_type_dc,
+ drm_bo_type_kernel, /* for initial kernel allocations */
drm_bo_type_user,
drm_bo_type_fake,
drm_bo_type_kernel, /* for initial kernel allocations */
@@ -882,6 +884,99 @@ typedef union drm_mm_init_arg{
} rep;
} drm_mm_init_arg_t;
+/*
+ * Drm mode setting
+ */
+#define DRM_DISPLAY_INFO_LEN 32
+#define DRM_OUTPUT_NAME_LEN 32
+#define DRM_DISPLAY_MODE_LEN 32
+
+struct drm_mode_modeinfo {
+
+ unsigned int id;
+
+ unsigned int clock;
+ unsigned short hdisplay, hsync_start, hsync_end, htotal, hskew;
+ unsigned short vdisplay, vsync_start, vsync_end, vtotal, vscan;
+
+ unsigned int vrefresh; /* vertical refresh * 1000 */
+
+ unsigned int flags;
+
+ char name[DRM_DISPLAY_MODE_LEN];
+};
+
+struct drm_mode_card_res {
+
+ int count_fbs;
+ unsigned int __user *fb_id;
+
+ int count_crtcs;
+ unsigned int __user *crtc_id;
+
+ int count_outputs;
+ unsigned int __user *output_id;
+
+ int count_modes;
+ struct drm_mode_modeinfo __user *modes;
+
+};
+
+struct drm_mode_crtc {
+ unsigned int crtc_id; /**< Id */
+ unsigned int fb_id; /**< Id of framebuffer */
+
+ int x, y; /**< Position on the frameuffer */
+
+ unsigned int mode; /**< Current mode used */
+
+ int count_outputs;
+ unsigned int outputs; /**< Outputs that are connected */
+
+ int count_possibles;
+ unsigned int possibles; /**< Outputs that can be connected */
+
+ unsigned int __user *set_outputs; /**< Outputs to be connected */
+
+ int gamma_size;
+
+};
+
+struct drm_mode_get_output {
+
+ unsigned int output; /**< Id */
+ unsigned int crtc; /**< Id of crtc */
+ unsigned char name[DRM_OUTPUT_NAME_LEN];
+
+ unsigned int connection;
+ unsigned int mm_width, mm_height; /**< HxW in millimeters */
+ unsigned int subpixel;
+
+ int count_crtcs;
+ unsigned int crtcs; /**< possible crtc to connect to */
+
+ int count_clones;
+ unsigned int clones; /**< list of clones */
+
+ int count_modes;
+ unsigned int __user *modes; /**< list of modes it supports */
+
+};
+
+struct drm_mode_fb_cmd {
+ unsigned int buffer_id;
+ unsigned int width, height;
+ unsigned int pitch;
+ unsigned int bpp;
+ unsigned int handle;
+ unsigned int depth;
+};
+
+struct drm_mode_mode_cmd {
+ unsigned int output_id;
+ unsigned int mode_id;
+};
+
/**
* \name Ioctls Definitions
*/
@@ -953,6 +1048,18 @@ typedef union drm_mm_init_arg{
#define DRM_IOCTL_UPDATE_DRAW DRM_IOW(0x3f, drm_update_draw_t)
+#define DRM_IOCTL_MODE_GETRESOURCES DRM_IOWR(0xA0, struct drm_mode_card_res)
+#define DRM_IOCTL_MODE_GETCRTC DRM_IOWR(0xA1, struct drm_mode_crtc)
+#define DRM_IOCTL_MODE_GETOUTPUT DRM_IOWR(0xA2, struct drm_mode_get_output)
+#define DRM_IOCTL_MODE_SETCRTC DRM_IOWR(0xA3, struct drm_mode_crtc)
+#define DRM_IOCTL_MODE_ADDFB DRM_IOWR(0xA4, struct drm_mode_fb_cmd)
+#define DRM_IOCTL_MODE_RMFB DRM_IOWR(0xA5, unsigned int)
+#define DRM_IOCTL_MODE_GETFB DRM_IOWR(0xA6, struct drm_mode_fb_cmd)
+
+#define DRM_IOCTL_MODE_ADDMODE DRM_IOWR(0xA7, struct drm_mode_modeinfo)
+#define DRM_IOCTL_MODE_RMMODE DRM_IOWR(0xA8, unsigned int)
+#define DRM_IOCTL_MODE_ATTACHMODE DRM_IOWR(0xA9, struct drm_mode_mode_cmd)
+#define DRM_IOCTL_MODE_DETACHMODE DRM_IOWR(0xAA, struct drm_mode_mode_cmd)
/*@}*/
/**
diff --git a/shared-core/i915_dma.c b/shared-core/i915_dma.c
index 8991a3ce..a5e51de4 100644
--- a/shared-core/i915_dma.c
+++ b/shared-core/i915_dma.c
@@ -31,13 +31,6 @@
#include "i915_drm.h"
#include "i915_drv.h"
-#define IS_I965G(dev) (dev->pci_device == 0x2972 || \
- dev->pci_device == 0x2982 || \
- dev->pci_device == 0x2992 || \
- dev->pci_device == 0x29A2 || \
- dev->pci_device == 0x2A02)
-
-
/* Really want an OS-independent resettable timer. Would like to have
* this loop run for (eg) 3 sec, but have the timer reset every time
* the head pointer changes, so that EBUSY only happens if the ring
@@ -85,34 +78,18 @@ void i915_kernel_lost_context(drm_device_t * dev)
dev_priv->sarea_priv->perf_boxes |= I915_BOX_RING_EMPTY;
}
-static int i915_dma_cleanup(drm_device_t * dev)
+int i915_dma_cleanup(drm_device_t * dev)
{
+ drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
/* Make sure interrupts are disabled here because the uninstall ioctl
* may not have been called from userspace and after dev_private
* is freed, it's too late.
*/
+ I915_WRITE(LP_RING + RING_LEN, 0);
+
if (dev->irq)
drm_irq_uninstall(dev);
- if (dev->dev_private) {
- drm_i915_private_t *dev_priv =
- (drm_i915_private_t *) dev->dev_private;
-
- if (dev_priv->ring.virtual_start) {
- drm_core_ioremapfree(&dev_priv->ring.map, dev);
- }
-
- if (dev_priv->status_page_dmah) {
- drm_pci_free(dev, dev_priv->status_page_dmah);
- /* Need to rewrite hardware status page */
- I915_WRITE(0x02080, 0x1ffff000);
- }
-
- drm_free(dev->dev_private, sizeof(drm_i915_private_t),
- DRM_MEM_DRIVER);
-
- dev->dev_private = NULL;
- }
return 0;
}
@@ -121,8 +98,6 @@ static int i915_initialize(drm_device_t * dev,
drm_i915_private_t * dev_priv,
drm_i915_init_t * init)
{
- memset(dev_priv, 0, sizeof(drm_i915_private_t));
-
dev_priv->sarea = drm_getsarea(dev);
if (!dev_priv->sarea) {
DRM_ERROR("can not find sarea!\n");
@@ -131,39 +106,11 @@ static int i915_initialize(drm_device_t * dev,
return DRM_ERR(EINVAL);
}
- dev_priv->mmio_map = drm_core_findmap(dev, init->mmio_offset);
- if (!dev_priv->mmio_map) {
- dev->dev_private = (void *)dev_priv;
- i915_dma_cleanup(dev);
- DRM_ERROR("can not find mmio map!\n");
- return DRM_ERR(EINVAL);
- }
-
- dev_priv->sarea_priv = (drm_i915_sarea_t *)
- ((u8 *) dev_priv->sarea->handle + init->sarea_priv_offset);
-
- dev_priv->ring.Start = init->ring_start;
- dev_priv->ring.End = init->ring_end;
- dev_priv->ring.Size = init->ring_size;
- dev_priv->ring.tail_mask = dev_priv->ring.Size - 1;
-
- dev_priv->ring.map.offset = init->ring_start;
- dev_priv->ring.map.size = init->ring_size;
- dev_priv->ring.map.type = 0;
- dev_priv->ring.map.flags = 0;
- dev_priv->ring.map.mtrr = 0;
+ memset((void *)(dev_priv->ring.virtual_start), 0, dev_priv->ring.Size);
- drm_core_ioremap(&dev_priv->ring.map, dev);
+ I915_WRITE(LP_RING + RING_START, dev_priv->ring.Start);
+ I915_WRITE(LP_RING + RING_LEN, ((dev_priv->ring.Size - 4096) & RING_NR_PAGES) | (RING_NO_REPORT | RING_VALID));
- if (dev_priv->ring.map.handle == NULL) {
- dev->dev_private = (void *)dev_priv;
- i915_dma_cleanup(dev);
- DRM_ERROR("can not ioremap virtual address for"
- " ring buffer\n");
- return DRM_ERR(ENOMEM);
- }
-
- dev_priv->ring.virtual_start = dev_priv->ring.map.handle;
dev_priv->cpp = init->cpp;
dev_priv->sarea_priv->pf_current_page = 0;
@@ -209,30 +156,7 @@ static int i915_dma_resume(drm_device_t * dev)
DRM_DEBUG("%s\n", __FUNCTION__);
- if (!dev_priv->sarea) {
- DRM_ERROR("can not find sarea!\n");
- return DRM_ERR(EINVAL);
- }
-
- if (!dev_priv->mmio_map) {
- DRM_ERROR("can not find mmio map!\n");
- return DRM_ERR(EINVAL);
- }
-
- if (dev_priv->ring.map.handle == NULL) {
- DRM_ERROR("can not ioremap virtual address for"
- " ring buffer\n");
- return DRM_ERR(ENOMEM);
- }
-
- /* Program Hardware Status Page */
- if (!dev_priv->hw_status_page) {
- DRM_ERROR("Can not find hardware status page\n");
- return DRM_ERR(EINVAL);
- }
- DRM_DEBUG("hw status page @ %p\n", dev_priv->hw_status_page);
-
- I915_WRITE(0x02080, dev_priv->dma_status_page);
+ I915_WRITE(I915REG_HWS_PGA, dev_priv->dma_status_page);
DRM_DEBUG("Enabled hardware status page\n");
return 0;
@@ -241,7 +165,7 @@ static int i915_dma_resume(drm_device_t * dev)
static int i915_dma_init(DRM_IOCTL_ARGS)
{
DRM_DEVICE;
- drm_i915_private_t *dev_priv;
+ drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
drm_i915_init_t init;
int retcode = 0;
@@ -250,10 +174,6 @@ static int i915_dma_init(DRM_IOCTL_ARGS)
switch (init.func) {
case I915_INIT_DMA:
- dev_priv = drm_alloc(sizeof(drm_i915_private_t),
- DRM_MEM_DRIVER);
- if (dev_priv == NULL)
- return DRM_ERR(ENOMEM);
retcode = i915_initialize(dev, dev_priv, &init);
break;
case I915_CLEANUP_DMA:
@@ -882,36 +802,6 @@ static int i915_mmio(DRM_IOCTL_ARGS)
return 0;
}
-int i915_driver_load(drm_device_t *dev, unsigned long flags)
-{
- /* i915 has 4 more counters */
- dev->counters += 4;
- dev->types[6] = _DRM_STAT_IRQ;
- dev->types[7] = _DRM_STAT_PRIMARY;
- dev->types[8] = _DRM_STAT_SECONDARY;
- dev->types[9] = _DRM_STAT_DMA;
-
- return 0;
-}
-
-void i915_driver_lastclose(drm_device_t * dev)
-{
- if (dev->dev_private) {
- drm_i915_private_t *dev_priv = dev->dev_private;
- i915_do_cleanup_pageflip(dev);
- i915_mem_takedown(&(dev_priv->agp_heap));
- }
- i915_dma_cleanup(dev);
-}
-
-void i915_driver_preclose(drm_device_t * dev, DRMFILE filp)
-{
- if (dev->dev_private) {
- drm_i915_private_t *dev_priv = dev->dev_private;
- i915_mem_release(dev, filp, dev_priv->agp_heap);
- }
-}
-
drm_ioctl_desc_t i915_ioctls[] = {
[DRM_IOCTL_NR(DRM_I915_INIT)] = {i915_dma_init, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY},
[DRM_IOCTL_NR(DRM_I915_FLUSH)] = {i915_flush_ioctl, DRM_AUTH},
@@ -950,10 +840,4 @@ int i915_driver_device_is_agp(drm_device_t * dev)
return 1;
}
-int i915_driver_firstopen(struct drm_device *dev)
-{
-#ifdef I915_HAVE_BUFFER
- drm_bo_driver_init(dev);
-#endif
- return 0;
-}
+
diff --git a/shared-core/i915_drv.h b/shared-core/i915_drv.h
index e8a7be29..c41fbbc5 100644
--- a/shared-core/i915_drv.h
+++ b/shared-core/i915_drv.h
@@ -89,9 +89,13 @@ typedef struct _drm_i915_vbl_swap {
} drm_i915_vbl_swap_t;
typedef struct drm_i915_private {
+ drm_buffer_object_t *ring_buffer;
drm_local_map_t *sarea;
drm_local_map_t *mmio_map;
+ unsigned long mmiobase;
+ unsigned long mmiolen;
+
drm_i915_sarea_t *sarea_priv;
drm_i915_ring_buffer_t ring;
@@ -130,6 +134,67 @@ typedef struct drm_i915_private {
spinlock_t swaps_lock;
drm_i915_vbl_swap_t vbl_swaps;
unsigned int swaps_pending;
+
+ /* LVDS info */
+ int backlight_duty_cycle; /* restore backlight to this value */
+ bool panel_wants_dither;
+ struct drm_display_mode *panel_fixed_mode;
+
+ /* Register state */
+ u32 saveDSPACNTR;
+ u32 saveDSPBCNTR;
+ u32 savePIPEACONF;
+ u32 savePIPEBCONF;
+ u32 savePIPEASRC;
+ u32 savePIPEBSRC;
+ u32 saveFPA0;
+ u32 saveFPA1;
+ u32 saveDPLL_A;
+ u32 saveDPLL_A_MD;
+ u32 saveHTOTAL_A;
+ u32 saveHBLANK_A;
+ u32 saveHSYNC_A;
+ u32 saveVTOTAL_A;
+ u32 saveVBLANK_A;
+ u32 saveVSYNC_A;
+ u32 saveDSPASTRIDE;
+ u32 saveDSPASIZE;
+ u32 saveDSPAPOS;
+ u32 saveDSPABASE;
+ u32 saveDSPASURF;
+ u32 saveFPB0;
+ u32 saveFPB1;
+ u32 saveDPLL_B;
+ u32 saveDPLL_B_MD;
+ u32 saveHTOTAL_B;
+ u32 saveHBLANK_B;
+ u32 saveHSYNC_B;
+ u32 saveVTOTAL_B;
+ u32 saveVBLANK_B;
+ u32 saveVSYNC_B;
+ u32 saveDSPBSTRIDE;
+ u32 saveDSPBSIZE;
+ u32 saveDSPBPOS;
+ u32 saveDSPBBASE;
+ u32 saveDSPBSURF;
+ u32 saveVCLK_DIVISOR_VGA0;
+ u32 saveVCLK_DIVISOR_VGA1;
+ u32 saveVCLK_POST_DIV;
+ u32 saveVGACNTRL;
+ u32 saveADPA;
+ u32 saveLVDS;
+ u32 saveDVOA;
+ u32 saveDVOB;
+ u32 saveDVOC;
+ u32 savePP_ON;
+ u32 savePP_OFF;
+ u32 savePP_CONTROL;
+ u32 savePP_CYCLE;
+ u32 savePFIT_CONTROL;
+ u32 savePaletteA[256];
+ u32 savePaletteB[256];
+ u32 saveSWF[17];
+ u32 saveBLC_PWM_CTL;
} drm_i915_private_t;
enum intel_chip_family {
@@ -145,6 +210,8 @@ extern int i915_max_ioctl;
/* i915_dma.c */
extern void i915_kernel_lost_context(drm_device_t * dev);
extern int i915_driver_load(struct drm_device *, unsigned long flags);
+extern int i915_driver_unload(drm_device_t *dev);
+extern int i915_driver_firstopen(struct drm_device *dev);
extern void i915_driver_lastclose(drm_device_t * dev);
extern void i915_driver_preclose(drm_device_t * dev, DRMFILE filp);
extern int i915_driver_device_is_agp(drm_device_t * dev);
@@ -154,6 +221,7 @@ extern void i915_emit_breadcrumb(drm_device_t *dev);
extern void i915_dispatch_flip(drm_device_t * dev, int pipes, int sync);
extern int i915_emit_mi_flush(drm_device_t *dev, uint32_t flush);
extern int i915_driver_firstopen(struct drm_device *dev);
+extern int i915_dma_cleanup(drm_device_t * dev);
/* i915_irq.c */
extern int i915_irq_emit(DRM_IOCTL_ARGS);
@@ -170,6 +238,7 @@ extern int i915_vblank_pipe_get(DRM_IOCTL_ARGS);
extern int i915_emit_irq(drm_device_t * dev);
extern void i915_user_irq_on(drm_i915_private_t *dev_priv);
extern void i915_user_irq_off(drm_i915_private_t *dev_priv);
+extern void i915_enable_interrupt (drm_device_t *dev);
extern int i915_vblank_swap(DRM_IOCTL_ARGS);
/* i915_mem.c */
@@ -206,6 +275,12 @@ extern int i915_move(drm_buffer_object_t *bo, int evict,
#endif
+
+/* modesetting */
+extern void intel_modeset_init(drm_device_t *dev);
+extern void intel_modeset_cleanup(drm_device_t *dev);
+
+
#define I915_READ(reg) DRM_READ32(dev_priv->mmio_map, (reg))
#define I915_WRITE(reg,val) DRM_WRITE32(dev_priv->mmio_map, (reg), (val))
#define I915_READ16(reg) DRM_READ16(dev_priv->mmio_map, (reg))
@@ -243,8 +318,31 @@ extern int i915_move(drm_buffer_object_t *bo, int evict,
I915_WRITE(LP_RING + RING_TAIL, outring); \
} while(0)
+#define MI_NOOP (0x00 << 23)
+
extern int i915_wait_ring(drm_device_t * dev, int n, const char *caller);
+/*
+ * The Bridge device's PCI config space has information about the
+ * fb aperture size and the amount of pre-reserved memory.
+ */
+#define INTEL_GMCH_CTRL 0x52
+#define INTEL_GMCH_ENABLED 0x4
+#define INTEL_GMCH_MEM_MASK 0x1
+#define INTEL_GMCH_MEM_64M 0x1
+#define INTEL_GMCH_MEM_128M 0
+
+#define INTEL_855_GMCH_GMS_MASK (0x7 << 4)
+#define INTEL_855_GMCH_GMS_DISABLED (0x0 << 4)
+#define INTEL_855_GMCH_GMS_STOLEN_1M (0x1 << 4)
+#define INTEL_855_GMCH_GMS_STOLEN_4M (0x2 << 4)
+#define INTEL_855_GMCH_GMS_STOLEN_8M (0x3 << 4)
+#define INTEL_855_GMCH_GMS_STOLEN_16M (0x4 << 4)
+#define INTEL_855_GMCH_GMS_STOLEN_32M (0x5 << 4)
+
+#define INTEL_915G_GMCH_GMS_STOLEN_48M (0x6 << 4)
+#define INTEL_915G_GMCH_GMS_STOLEN_64M (0x7 << 4)
+
#define GFX_OP_USER_INTERRUPT ((0<<29)|(2<<23))
#define GFX_OP_BREAKPOINT_INTERRUPT ((0<<29)|(1<<23))
#define CMD_REPORT_HEAD (7<<23)
@@ -261,6 +359,7 @@ extern int i915_wait_ring(drm_device_t * dev, int n, const char *caller);
#define BB1_UNPROTECTED (0<<0)
#define BB2_END_ADDR_MASK (~0x7)
+#define I915REG_HWS_PGA 0x02080
#define I915REG_HWSTAM 0x02098
#define I915REG_INT_IDENTITY_R 0x020a4
#define I915REG_INT_MASK_R 0x020a8
@@ -273,6 +372,30 @@ extern int i915_wait_ring(drm_device_t * dev, int n, const char *caller);
#define I915_VBLANK_INTERRUPT_ENABLE (1UL<<17)
#define I915_VBLANK_CLEAR (1UL<<1)
+#define GPIOA 0x5010
+#define GPIOB 0x5014
+#define GPIOC 0x5018
+#define GPIOD 0x501c
+#define GPIOE 0x5020
+#define GPIOF 0x5024
+#define GPIOG 0x5028
+#define GPIOH 0x502c
+# define GPIO_CLOCK_DIR_MASK (1 << 0)
+# define GPIO_CLOCK_DIR_IN (0 << 1)
+# define GPIO_CLOCK_DIR_OUT (1 << 1)
+# define GPIO_CLOCK_VAL_MASK (1 << 2)
+# define GPIO_CLOCK_VAL_OUT (1 << 3)
+# define GPIO_CLOCK_VAL_IN (1 << 4)
+# define GPIO_CLOCK_PULLUP_DISABLE (1 << 5)
+# define GPIO_DATA_DIR_MASK (1 << 8)
+# define GPIO_DATA_DIR_IN (0 << 9)
+# define GPIO_DATA_DIR_OUT (1 << 9)
+# define GPIO_DATA_VAL_MASK (1 << 10)
+# define GPIO_DATA_VAL_OUT (1 << 11)
+# define GPIO_DATA_VAL_IN (1 << 12)
+# define GPIO_DATA_PULLUP_DISABLE (1 << 13)
+
+
#define SRX_INDEX 0x3c4
#define SRX_DATA 0x3c5
#define SR01 1
@@ -281,6 +404,8 @@ extern int i915_wait_ring(drm_device_t * dev, int n, const char *caller);
#define PPCR 0x61204
#define PPCR_ON (1<<0)
+#define DVOA 0x61120
+#define DVOA_ON (1<<31)
#define DVOB 0x61140
#define DVOB_ON (1<<31)
#define DVOC 0x61160
@@ -339,8 +464,14 @@ extern int i915_wait_ring(drm_device_t * dev, int n, const char *caller);
#define SRC_COPY_BLT_CMD ((2<<29)|(0x43<<22)|4)
#define XY_SRC_COPY_BLT_CMD ((2<<29)|(0x53<<22)|6)
+#define XY_MONO_SRC_COPY_IMM_BLT ((2<<29)|(0x71<<22)|5)
#define XY_SRC_COPY_BLT_WRITE_ALPHA (1<<21)
#define XY_SRC_COPY_BLT_WRITE_RGB (1<<20)
+#define BLT_DEPTH_8 (0<<24)
+#define BLT_DEPTH_16_565 (1<<24)
+#define BLT_DEPTH_16_1555 (2<<24)
+#define BLT_DEPTH_32 (3<<24)
+#define BLT_ROP_GXCOPY (0xcc<<16)
#define MI_BATCH_BUFFER ((0x30<<23)|1)
#define MI_BATCH_BUFFER_START (0x31<<23)
@@ -363,4 +494,447 @@ extern int i915_wait_ring(drm_device_t * dev, int n, const char *caller);
#define READ_BREADCRUMB(dev_priv) (((volatile u32*)(dev_priv->hw_status_page))[5])
#define READ_HWSP(dev_priv, reg) (((volatile u32*)(dev_priv->hw_status_page))[reg])
+
+#define BLC_PWM_CTL 0x61254
+#define BACKLIGHT_MODULATION_FREQ_SHIFT (17)
+/**
+ * This is the most significant 15 bits of the number of backlight cycles in a
+ * complete cycle of the modulated backlight control.
+ *
+ * The actual value is this field multiplied by two.
+ */
+#define BACKLIGHT_MODULATION_FREQ_MASK (0x7fff << 17)
+#define BLM_LEGACY_MODE (1 << 16)
+/**
+ * This is the number of cycles out of the backlight modulation cycle for which
+ * the backlight is on.
+ *
+ * This field must be no greater than the number of cycles in the complete
+ * backlight modulation cycle.
+ */
+#define BACKLIGHT_DUTY_CYCLE_SHIFT (0)
+#define BACKLIGHT_DUTY_CYCLE_MASK (0xffff)
+
+#define I915_GCFGC 0xf0
+#define I915_LOW_FREQUENCY_ENABLE (1 << 7)
+#define I915_DISPLAY_CLOCK_190_200_MHZ (0 << 4)
+#define I915_DISPLAY_CLOCK_333_MHZ (4 << 4)
+#define I915_DISPLAY_CLOCK_MASK (7 << 4)
+
+#define I855_HPLLCC 0xc0
+#define I855_CLOCK_CONTROL_MASK (3 << 0)
+#define I855_CLOCK_133_200 (0 << 0)
+#define I855_CLOCK_100_200 (1 << 0)
+#define I855_CLOCK_100_133 (2 << 0)
+#define I855_CLOCK_166_250 (3 << 0)
+
+/* I830 CRTC registers */
+#define HTOTAL_A 0x60000
+#define HBLANK_A 0x60004
+#define HSYNC_A 0x60008
+#define VTOTAL_A 0x6000c
+#define VBLANK_A 0x60010
+#define VSYNC_A 0x60014
+#define PIPEASRC 0x6001c
+#define BCLRPAT_A 0x60020
+#define VSYNCSHIFT_A 0x60028
+
+#define HTOTAL_B 0x61000
+#define HBLANK_B 0x61004
+#define HSYNC_B 0x61008
+#define VTOTAL_B 0x6100c
+#define VBLANK_B 0x61010
+#define VSYNC_B 0x61014
+#define PIPEBSRC 0x6101c
+#define BCLRPAT_B 0x61020
+#define VSYNCSHIFT_B 0x61028
+
+#define PP_STATUS 0x61200
+# define PP_ON (1 << 31)
+/**
+ * Indicates that all dependencies of the panel are on:
+ *
+ * - PLL enabled
+ * - pipe enabled
+ * - LVDS/DVOB/DVOC on
+ */
+# define PP_READY (1 << 30)
+# define PP_SEQUENCE_NONE (0 << 28)
+# define PP_SEQUENCE_ON (1 << 28)
+# define PP_SEQUENCE_OFF (2 << 28)
+# define PP_SEQUENCE_MASK 0x30000000
+#define PP_CONTROL 0x61204
+# define POWER_TARGET_ON (1 << 0)
+
+#define LVDSPP_ON 0x61208
+#define LVDSPP_OFF 0x6120c
+#define PP_CYCLE 0x61210
+
+#define PFIT_CONTROL 0x61230
+# define PFIT_ENABLE (1 << 31)
+# define PFIT_PIPE_MASK (3 << 29)
+# define PFIT_PIPE_SHIFT 29
+# define VERT_INTERP_DISABLE (0 << 10)
+# define VERT_INTERP_BILINEAR (1 << 10)
+# define VERT_INTERP_MASK (3 << 10)
+# define VERT_AUTO_SCALE (1 << 9)
+# define HORIZ_INTERP_DISABLE (0 << 6)
+# define HORIZ_INTERP_BILINEAR (1 << 6)
+# define HORIZ_INTERP_MASK (3 << 6)
+# define HORIZ_AUTO_SCALE (1 << 5)
+# define PANEL_8TO6_DITHER_ENABLE (1 << 3)
+
+#define PFIT_PGM_RATIOS 0x61234
+# define PFIT_VERT_SCALE_MASK 0xfff00000
+# define PFIT_HORIZ_SCALE_MASK 0x0000fff0
+
+#define PFIT_AUTO_RATIOS 0x61238
+
+
+#define DPLL_A 0x06014
+#define DPLL_B 0x06018
+# define DPLL_VCO_ENABLE (1 << 31)
+# define DPLL_DVO_HIGH_SPEED (1 << 30)
+# define DPLL_SYNCLOCK_ENABLE (1 << 29)
+# define DPLL_VGA_MODE_DIS (1 << 28)
+# define DPLLB_MODE_DAC_SERIAL (1 << 26) /* i915 */
+# define DPLLB_MODE_LVDS (2 << 26) /* i915 */
+# define DPLL_MODE_MASK (3 << 26)
+# define DPLL_DAC_SERIAL_P2_CLOCK_DIV_10 (0 << 24) /* i915 */
+# define DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 (1 << 24) /* i915 */
+# define DPLLB_LVDS_P2_CLOCK_DIV_14 (0 << 24) /* i915 */
+# define DPLLB_LVDS_P2_CLOCK_DIV_7 (1 << 24) /* i915 */
+# define DPLL_P2_CLOCK_DIV_MASK 0x03000000 /* i915 */
+# define DPLL_FPA01_P1_POST_DIV_MASK 0x00ff0000 /* i915 */
+/**
+ * The i830 generation, in DAC/serial mode, defines p1 as two plus this
+ * bitfield, or just 2 if PLL_P1_DIVIDE_BY_TWO is set.
+ */
+# define DPLL_FPA01_P1_POST_DIV_MASK_I830 0x001f0000
+/**
+ * The i830 generation, in LVDS mode, defines P1 as the bit number set within
+ * this field (only one bit may be set).
+ */
+# define DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS 0x003f0000
+# define DPLL_FPA01_P1_POST_DIV_SHIFT 16
+# define PLL_P2_DIVIDE_BY_4 (1 << 23) /* i830, required in DVO non-gang */
+# define PLL_P1_DIVIDE_BY_TWO (1 << 21) /* i830 */
+# define PLL_REF_INPUT_DREFCLK (0 << 13)
+# define PLL_REF_INPUT_TVCLKINA (1 << 13) /* i830 */
+# define PLL_REF_INPUT_TVCLKINBC (2 << 13) /* SDVO TVCLKIN */
+# define PLLB_REF_INPUT_SPREADSPECTRUMIN (3 << 13)
+# define PLL_REF_INPUT_MASK (3 << 13)
+# define PLL_LOAD_PULSE_PHASE_SHIFT 9
+/*
+ * Parallel to Serial Load Pulse phase selection.
+ * Selects the phase for the 10X DPLL clock for the PCIe
+ * digital display port. The range is 4 to 13; 10 or more
+ * is just a flip delay. The default is 6
+ */
+# define PLL_LOAD_PULSE_PHASE_MASK (0xf << PLL_LOAD_PULSE_PHASE_SHIFT)
+# define DISPLAY_RATE_SELECT_FPA1 (1 << 8)
+
+/**
+ * SDVO multiplier for 945G/GM. Not used on 965.
+ *
+ * \sa DPLL_MD_UDI_MULTIPLIER_MASK
+ */
+# define SDVO_MULTIPLIER_MASK 0x000000ff
+# define SDVO_MULTIPLIER_SHIFT_HIRES 4
+# define SDVO_MULTIPLIER_SHIFT_VGA 0
+
+/** @defgroup DPLL_MD
+ * @{
+ */
+/** Pipe A SDVO/UDI clock multiplier/divider register for G965. */
+#define DPLL_A_MD 0x0601c
+/** Pipe B SDVO/UDI clock multiplier/divider register for G965. */
+#define DPLL_B_MD 0x06020
+/**
+ * UDI pixel divider, controlling how many pixels are stuffed into a packet.
+ *
+ * Value is pixels minus 1. Must be set to 1 pixel for SDVO.
+ */
+# define DPLL_MD_UDI_DIVIDER_MASK 0x3f000000
+# define DPLL_MD_UDI_DIVIDER_SHIFT 24
+/** UDI pixel divider for VGA, same as DPLL_MD_UDI_DIVIDER_MASK. */
+# define DPLL_MD_VGA_UDI_DIVIDER_MASK 0x003f0000
+# define DPLL_MD_VGA_UDI_DIVIDER_SHIFT 16
+/**
+ * SDVO/UDI pixel multiplier.
+ *
+ * SDVO requires that the bus clock rate be between 1 and 2 Ghz, and the bus
+ * clock rate is 10 times the DPLL clock. At low resolution/refresh rate
+ * modes, the bus rate would be below the limits, so SDVO allows for stuffing
+ * dummy bytes in the datastream at an increased clock rate, with both sides of
+ * the link knowing how many bytes are fill.
+ *
+ * So, for a mode with a dotclock of 65Mhz, we would want to double the clock
+ * rate to 130Mhz to get a bus rate of 1.30Ghz. The DPLL clock rate would be
+ * set to 130Mhz, and the SDVO multiplier set to 2x in this register and
+ * through an SDVO command.
+ *
+ * This register field has values of multiplication factor minus 1, with
+ * a maximum multiplier of 5 for SDVO.
+ */
+# define DPLL_MD_UDI_MULTIPLIER_MASK 0x00003f00
+# define DPLL_MD_UDI_MULTIPLIER_SHIFT 8
+/** SDVO/UDI pixel multiplier for VGA, same as DPLL_MD_UDI_MULTIPLIER_MASK.
+ * This best be set to the default value (3) or the CRT won't work. No,
+ * I don't entirely understand what this does...
+ */
+# define DPLL_MD_VGA_UDI_MULTIPLIER_MASK 0x0000003f
+# define DPLL_MD_VGA_UDI_MULTIPLIER_SHIFT 0
+/** @} */
+
+#define DPLL_TEST 0x606c
+# define DPLLB_TEST_SDVO_DIV_1 (0 << 22)
+# define DPLLB_TEST_SDVO_DIV_2 (1 << 22)
+# define DPLLB_TEST_SDVO_DIV_4 (2 << 22)
+# define DPLLB_TEST_SDVO_DIV_MASK (3 << 22)
+# define DPLLB_TEST_N_BYPASS (1 << 19)
+# define DPLLB_TEST_M_BYPASS (1 << 18)
+# define DPLLB_INPUT_BUFFER_ENABLE (1 << 16)
+# define DPLLA_TEST_N_BYPASS (1 << 3)
+# define DPLLA_TEST_M_BYPASS (1 << 2)
+# define DPLLA_INPUT_BUFFER_ENABLE (1 << 0)
+
+#define ADPA 0x61100
+#define ADPA_DAC_ENABLE (1<<31)
+#define ADPA_DAC_DISABLE 0
+#define ADPA_PIPE_SELECT_MASK (1<<30)
+#define ADPA_PIPE_A_SELECT 0
+#define ADPA_PIPE_B_SELECT (1<<30)
+#define ADPA_USE_VGA_HVPOLARITY (1<<15)
+#define ADPA_SETS_HVPOLARITY 0
+#define ADPA_VSYNC_CNTL_DISABLE (1<<11)
+#define ADPA_VSYNC_CNTL_ENABLE 0
+#define ADPA_HSYNC_CNTL_DISABLE (1<<10)
+#define ADPA_HSYNC_CNTL_ENABLE 0
+#define ADPA_VSYNC_ACTIVE_HIGH (1<<4)
+#define ADPA_VSYNC_ACTIVE_LOW 0
+#define ADPA_HSYNC_ACTIVE_HIGH (1<<3)
+#define ADPA_HSYNC_ACTIVE_LOW 0
+
+#define FPA0 0x06040
+#define FPA1 0x06044
+#define FPB0 0x06048
+#define FPB1 0x0604c
+# define FP_N_DIV_MASK 0x003f0000
+# define FP_N_DIV_SHIFT 16
+# define FP_M1_DIV_MASK 0x00003f00
+# define FP_M1_DIV_SHIFT 8
+# define FP_M2_DIV_MASK 0x0000003f
+# define FP_M2_DIV_SHIFT 0
+
+
+#define PORT_HOTPLUG_EN 0x61110
+# define SDVOB_HOTPLUG_INT_EN (1 << 26)
+# define SDVOC_HOTPLUG_INT_EN (1 << 25)
+# define TV_HOTPLUG_INT_EN (1 << 18)
+# define CRT_HOTPLUG_INT_EN (1 << 9)
+# define CRT_HOTPLUG_FORCE_DETECT (1 << 3)
+
+#define PORT_HOTPLUG_STAT 0x61114
+# define CRT_HOTPLUG_INT_STATUS (1 << 11)
+# define TV_HOTPLUG_INT_STATUS (1 << 10)
+# define CRT_HOTPLUG_MONITOR_MASK (3 << 8)
+# define CRT_HOTPLUG_MONITOR_COLOR (3 << 8)
+# define CRT_HOTPLUG_MONITOR_MONO (2 << 8)
+# define CRT_HOTPLUG_MONITOR_NONE (0 << 8)
+# define SDVOC_HOTPLUG_INT_STATUS (1 << 7)
+# define SDVOB_HOTPLUG_INT_STATUS (1 << 6)
+
+#define SDVOB 0x61140
+#define SDVOC 0x61160
+#define SDVO_ENABLE (1 << 31)
+#define SDVO_PIPE_B_SELECT (1 << 30)
+#define SDVO_STALL_SELECT (1 << 29)
+#define SDVO_INTERRUPT_ENABLE (1 << 26)
+/**
+ * 915G/GM SDVO pixel multiplier.
+ *
+ * Programmed value is multiplier - 1, up to 5x.
+ *
+ * \sa DPLL_MD_UDI_MULTIPLIER_MASK
+ */
+#define SDVO_PORT_MULTIPLY_MASK (7 << 23)
+#define SDVO_PORT_MULTIPLY_SHIFT 23
+#define SDVO_PHASE_SELECT_MASK (15 << 19)
+#define SDVO_PHASE_SELECT_DEFAULT (6 << 19)
+#define SDVO_CLOCK_OUTPUT_INVERT (1 << 18)
+#define SDVOC_GANG_MODE (1 << 16)
+#define SDVO_BORDER_ENABLE (1 << 7)
+#define SDVOB_PCIE_CONCURRENCY (1 << 3)
+#define SDVO_DETECTED (1 << 2)
+/* Bits to be preserved when writing */
+#define SDVOB_PRESERVE_MASK ((1 << 17) | (1 << 16) | (1 << 14))
+#define SDVOC_PRESERVE_MASK (1 << 17)
+
+/** @defgroup LVDS
+ * @{
+ */
+/**
+ * This register controls the LVDS output enable, pipe selection, and data
+ * format selection.
+ *
+ * All of the clock/data pairs are force powered down by power sequencing.
+ */
+#define LVDS 0x61180
+/**
+ * Enables the LVDS port. This bit must be set before DPLLs are enabled, as
+ * the DPLL semantics change when the LVDS is assigned to that pipe.
+ */
+# define LVDS_PORT_EN (1 << 31)
+/** Selects pipe B for LVDS data. Must be set on pre-965. */
+# define LVDS_PIPEB_SELECT (1 << 30)
+
+/**
+ * Enables the A0-A2 data pairs and CLKA, containing 18 bits of color data per
+ * pixel.
+ */
+# define LVDS_A0A2_CLKA_POWER_MASK (3 << 8)
+# define LVDS_A0A2_CLKA_POWER_DOWN (0 << 8)
+# define LVDS_A0A2_CLKA_POWER_UP (3 << 8)
+/**
+ * Controls the A3 data pair, which contains the additional LSBs for 24 bit
+ * mode. Only enabled if LVDS_A0A2_CLKA_POWER_UP also indicates it should be
+ * on.
+ */
+# define LVDS_A3_POWER_MASK (3 << 6)
+# define LVDS_A3_POWER_DOWN (0 << 6)
+# define LVDS_A3_POWER_UP (3 << 6)
+/**
+ * Controls the CLKB pair. This should only be set when LVDS_B0B3_POWER_UP
+ * is set.
+ */
+# define LVDS_CLKB_POWER_MASK (3 << 4)
+# define LVDS_CLKB_POWER_DOWN (0 << 4)
+# define LVDS_CLKB_POWER_UP (3 << 4)
+
+/**
+ * Controls the B0-B3 data pairs. This must be set to match the DPLL p2
+ * setting for whether we are in dual-channel mode. The B3 pair will
+ * additionally only be powered up when LVDS_A3_POWER_UP is set.
+ */
+# define LVDS_B0B3_POWER_MASK (3 << 2)
+# define LVDS_B0B3_POWER_DOWN (0 << 2)
+# define LVDS_B0B3_POWER_UP (3 << 2)
+
+#define PIPEACONF 0x70008
+#define PIPEACONF_ENABLE (1<<31)
+#define PIPEACONF_DISABLE 0
+#define PIPEACONF_DOUBLE_WIDE (1<<30)
+#define I965_PIPECONF_ACTIVE (1<<30)
+#define PIPEACONF_SINGLE_WIDE 0
+#define PIPEACONF_PIPE_UNLOCKED 0
+#define PIPEACONF_PIPE_LOCKED (1<<25)
+#define PIPEACONF_PALETTE 0
+#define PIPEACONF_GAMMA (1<<24)
+#define PIPECONF_FORCE_BORDER (1<<25)
+#define PIPECONF_PROGRESSIVE (0 << 21)
+#define PIPECONF_INTERLACE_W_FIELD_INDICATION (6 << 21)
+#define PIPECONF_INTERLACE_FIELD_0_ONLY (7 << 21)
+
+#define PIPEBCONF 0x71008
+#define PIPEBCONF_ENABLE (1<<31)
+#define PIPEBCONF_DISABLE 0
+#define PIPEBCONF_DOUBLE_WIDE (1<<30)
+#define PIPEBCONF_DISABLE 0
+#define PIPEBCONF_GAMMA (1<<24)
+#define PIPEBCONF_PALETTE 0
+
+#define PIPEBGCMAXRED 0x71010
+#define PIPEBGCMAXGREEN 0x71014
+#define PIPEBGCMAXBLUE 0x71018
+#define PIPEBSTAT 0x71024
+#define PIPEBFRAMEHIGH 0x71040
+#define PIPEBFRAMEPIXEL 0x71044
+
+#define DSPACNTR 0x70180
+#define DSPBCNTR 0x71180
+#define DISPLAY_PLANE_ENABLE (1<<31)
+#define DISPLAY_PLANE_DISABLE 0
+#define DISPPLANE_GAMMA_ENABLE (1<<30)
+#define DISPPLANE_GAMMA_DISABLE 0
+#define DISPPLANE_PIXFORMAT_MASK (0xf<<26)
+#define DISPPLANE_8BPP (0x2<<26)
+#define DISPPLANE_15_16BPP (0x4<<26)
+#define DISPPLANE_16BPP (0x5<<26)
+#define DISPPLANE_32BPP_NO_ALPHA (0x6<<26)
+#define DISPPLANE_32BPP (0x7<<26)
+#define DISPPLANE_STEREO_ENABLE (1<<25)
+#define DISPPLANE_STEREO_DISABLE 0
+#define DISPPLANE_SEL_PIPE_MASK (1<<24)
+#define DISPPLANE_SEL_PIPE_A 0
+#define DISPPLANE_SEL_PIPE_B (1<<24)
+#define DISPPLANE_SRC_KEY_ENABLE (1<<22)
+#define DISPPLANE_SRC_KEY_DISABLE 0
+#define DISPPLANE_LINE_DOUBLE (1<<20)
+#define DISPPLANE_NO_LINE_DOUBLE 0
+#define DISPPLANE_STEREO_POLARITY_FIRST 0
+#define DISPPLANE_STEREO_POLARITY_SECOND (1<<18)
+/* plane B only */
+#define DISPPLANE_ALPHA_TRANS_ENABLE (1<<15)
+#define DISPPLANE_ALPHA_TRANS_DISABLE 0
+#define DISPPLANE_SPRITE_ABOVE_DISPLAYA 0
+#define DISPPLANE_SPRITE_ABOVE_OVERLAY (1)
+
+#define DSPABASE 0x70184
+#define DSPASTRIDE 0x70188
+
+#define DSPBBASE 0x71184
+#define DSPBADDR DSPBBASE
+#define DSPBSTRIDE 0x71188
+
+#define DSPAKEYVAL 0x70194
+#define DSPAKEYMASK 0x70198
+
+#define DSPAPOS 0x7018C /* reserved */
+#define DSPASIZE 0x70190
+#define DSPBPOS 0x7118C
+#define DSPBSIZE 0x71190
+
+#define DSPASURF 0x7019C
+#define DSPATILEOFF 0x701A4
+
+#define DSPBSURF 0x7119C
+#define DSPBTILEOFF 0x711A4
+
+#define VGACNTRL 0x71400
+# define VGA_DISP_DISABLE (1 << 31)
+# define VGA_2X_MODE (1 << 30)
+# define VGA_PIPE_B_SELECT (1 << 29)
+
+/*
+ * Palette registers
+ */
+#define PALETTE_A 0x0a000
+#define PALETTE_B 0x0a800
+
+#define IS_I830(dev) ((dev)->pci_device == PCI_DEVICE_ID_INTEL_82830_CGC)
+#define IS_845G(dev) ((dev)->pci_device == PCI_DEVICE_ID_INTEL_82845G_IG)
+#define IS_I85X(dev) ((dev)->pci_device == PCI_DEVICE_ID_INTEL_82855GM_IG)
+#define IS_I855(dev) ((dev)->pci_device == PCI_DEVICE_ID_INTEL_82855GM_IG)
+#define IS_I865G(dev) ((dev)->pci_device == PCI_DEVICE_ID_INTEL_82865_IG)
+
+#define IS_I915G(dev) (dev->pci_device == PCI_DEVICE_ID_INTEL_82915G_IG)/* || dev->pci_device == PCI_DEVICE_ID_INTELPCI_CHIP_E7221_G)*/
+#define IS_I915GM(dev) ((dev)->pci_device == PCI_DEVICE_ID_INTEL_82915GM_IG)
+#define IS_I945G(dev) ((dev)->pci_device == PCI_DEVICE_ID_INTEL_82945G_IG)
+#define IS_I945GM(dev) ((dev)->pci_device == PCI_DEVICE_ID_INTEL_82945GM_IG)
+
+#define IS_I965G(dev) ((dev)->pci_device == 0x2972 || \
+ (dev)->pci_device == 0x2982 || \
+ (dev)->pci_device == 0x2992 || \
+ (dev)->pci_device == 0x29A2)
+
+
+#define IS_I9XX(dev) (IS_I915G(dev) || IS_I915GM(dev) || IS_I945G(dev) || \
+ IS_I945GM(dev) || IS_I965G(dev))
+
+#define IS_MOBILE(dev) (IS_I830(dev) || IS_I85X(dev) || IS_I915GM(dev) || \
+ IS_I945GM(dev))
+
+#define PRIMARY_RINGBUFFER_SIZE (128*1024)
+
#endif
diff --git a/shared-core/i915_init.c b/shared-core/i915_init.c
new file mode 100644
index 00000000..61576aae
--- /dev/null
+++ b/shared-core/i915_init.c
@@ -0,0 +1,312 @@
+/*
+ * Copyright (c) 2007 Intel Corporation
+ * Jesse Barnes <jesse.barnes@intel.com>
+ *
+ * Copyright © 2002, 2003 David Dawes <dawes@xfree86.org>
+ * 2004 Sylvain Meyer
+ *
+ * GPL/BSD dual license
+ */
+#include "drmP.h"
+#include "drm.h"
+#include "drm_sarea.h"
+#include "i915_drm.h"
+#include "i915_drv.h"
+
+/**
+ * i915_probe_agp - get AGP bootup configuration
+ * @pdev: PCI device
+ * @aperture_size: returns AGP aperture configured size
+ * @preallocated_size: returns size of BIOS preallocated AGP space
+ *
+ * Since Intel integrated graphics are UMA, the BIOS has to set aside
+ * some RAM for the framebuffer at early boot. This code figures out
+ * how much was set aside so we can use it for our own purposes.
+ */
+int i915_probe_agp(struct pci_dev *pdev, unsigned long *aperture_size,
+ unsigned long *preallocated_size)
+{
+ struct pci_dev *bridge_dev;
+ u16 tmp = 0;
+ unsigned long overhead;
+
+ bridge_dev = pci_get_bus_and_slot(0, PCI_DEVFN(0,0));
+ if (!bridge_dev) {
+ DRM_ERROR("bridge device not found\n");
+ return -1;
+ }
+
+ /* Get the fb aperture size and "stolen" memory amount. */
+ pci_read_config_word(bridge_dev, INTEL_GMCH_CTRL, &tmp);
+ pci_dev_put(bridge_dev);
+
+ *aperture_size = 1024 * 1024;
+ *preallocated_size = 1024 * 1024;
+
+ switch (pdev->device) {
+ case PCI_DEVICE_ID_INTEL_82830_CGC:
+ case PCI_DEVICE_ID_INTEL_82845G_IG:
+ case PCI_DEVICE_ID_INTEL_82855GM_IG:
+ case PCI_DEVICE_ID_INTEL_82865_IG:
+ if ((tmp & INTEL_GMCH_MEM_MASK) == INTEL_GMCH_MEM_64M)
+ *aperture_size *= 64;
+ else
+ *aperture_size *= 128;
+ break;
+ default:
+ /* 9xx supports large sizes, just look at the length */
+ *aperture_size = pci_resource_len(pdev, 2);
+ break;
+ }
+
+ /*
+ * Some of the preallocated space is taken by the GTT
+ * and popup. GTT is 1K per MB of aperture size, and popup is 4K.
+ */
+ overhead = (*aperture_size / 1024) + 4096;
+ switch (tmp & INTEL_855_GMCH_GMS_MASK) {
+ case INTEL_855_GMCH_GMS_STOLEN_1M:
+ break; /* 1M already */
+ case INTEL_855_GMCH_GMS_STOLEN_4M:
+ *preallocated_size *= 4;
+ break;
+ case INTEL_855_GMCH_GMS_STOLEN_8M:
+ *preallocated_size *= 8;
+ break;
+ case INTEL_855_GMCH_GMS_STOLEN_16M:
+ *preallocated_size *= 16;
+ break;
+ case INTEL_855_GMCH_GMS_STOLEN_32M:
+ *preallocated_size *= 32;
+ break;
+ case INTEL_915G_GMCH_GMS_STOLEN_48M:
+ *preallocated_size *= 48;
+ break;
+ case INTEL_915G_GMCH_GMS_STOLEN_64M:
+ *preallocated_size *= 64;
+ break;
+ case INTEL_855_GMCH_GMS_DISABLED:
+ DRM_ERROR("video memory is disabled\n");
+ return -1;
+ default:
+ DRM_ERROR("unexpected GMCH_GMS value: 0x%02x\n",
+ tmp & INTEL_855_GMCH_GMS_MASK);
+ return -1;
+ }
+ *preallocated_size -= overhead;
+
+ return 0;
+}
+
+/**
+ * i915_driver_load - setup chip and create an initial config
+ * @dev: DRM device
+ * @flags: startup flags
+ *
+ * The driver load routine has to do several things:
+ * - drive output discovery via intel_modeset_init()
+ * - initialize the memory manager
+ * - allocate initial config memory
+ * - setup the DRM framebuffer with the allocated memory
+ */
+int i915_driver_load(drm_device_t *dev, unsigned long flags)
+{
+ drm_i915_private_t *dev_priv;
+ unsigned long agp_size, prealloc_size;
+ unsigned long sareapage;
+ int size, ret;
+
+ dev_priv = drm_alloc(sizeof(drm_i915_private_t), DRM_MEM_DRIVER);
+ if (dev_priv == NULL)
+ return DRM_ERR(ENOMEM);
+
+ memset(dev_priv, 0, sizeof(drm_i915_private_t));
+ dev->dev_private = (void *)dev_priv;
+// dev_priv->flags = flags;
+
+ /* i915 has 4 more counters */
+ dev->counters += 4;
+ dev->types[6] = _DRM_STAT_IRQ;
+ dev->types[7] = _DRM_STAT_PRIMARY;
+ dev->types[8] = _DRM_STAT_SECONDARY;
+ dev->types[9] = _DRM_STAT_DMA;
+
+ if (IS_I9XX(dev)) {
+ dev_priv->mmiobase = drm_get_resource_start(dev, 0);
+ dev_priv->mmiolen = drm_get_resource_len(dev, 0);
+ dev->mode_config.fb_base =
+ drm_get_resource_start(dev, 2) & 0xff000000;
+ } else if (drm_get_resource_start(dev, 1)) {
+ dev_priv->mmiobase = drm_get_resource_start(dev, 1);
+ dev_priv->mmiolen = drm_get_resource_len(dev, 1);
+ dev->mode_config.fb_base =
+ drm_get_resource_start(dev, 0) & 0xff000000;
+ } else {
+ DRM_ERROR("Unable to find MMIO registers\n");
+ return -ENODEV;
+ }
+
+ DRM_DEBUG("fb_base: 0x%08lx\n", dev->mode_config.fb_base);
+
+ ret = drm_addmap(dev, dev_priv->mmiobase, dev_priv->mmiolen,
+ _DRM_REGISTERS, _DRM_READ_ONLY|_DRM_DRIVER, &dev_priv->mmio_map);
+ if (ret != 0) {
+ DRM_ERROR("Cannot add mapping for MMIO registers\n");
+ return ret;
+ }
+
+ /* prebuild the SAREA */
+ sareapage = max(SAREA_MAX, PAGE_SIZE);
+ ret = drm_addmap(dev, 0, sareapage, _DRM_SHM, _DRM_CONTAINS_LOCK|_DRM_DRIVER,
+ &dev_priv->sarea);
+ if (ret) {
+ DRM_ERROR("SAREA setup failed\n");
+ return ret;
+ }
+
+ init_waitqueue_head(&dev->lock.lock_queue);
+
+ /* FIXME: assume sarea_priv is right after SAREA */
+ dev_priv->sarea_priv = dev_priv->sarea->handle + sizeof(drm_sarea_t);
+
+ /*
+ * Initialize the memory manager for local and AGP space
+ */
+ drm_bo_driver_init(dev);
+
+ i915_probe_agp(dev->pdev, &agp_size, &prealloc_size);
+ DRM_DEBUG("setting up %ld bytes of PRIV0 space\n", prealloc_size);
+ drm_bo_init_mm(dev, DRM_BO_MEM_PRIV0, 0, prealloc_size >> PAGE_SHIFT);
+
+ I915_WRITE(LP_RING + RING_LEN, 0);
+ I915_WRITE(LP_RING + RING_HEAD, 0);
+ I915_WRITE(LP_RING + RING_TAIL, 0);
+
+ size = PRIMARY_RINGBUFFER_SIZE;
+ ret = drm_buffer_object_create(dev, size, drm_bo_type_kernel,
+ DRM_BO_FLAG_READ | DRM_BO_FLAG_WRITE |
+ DRM_BO_FLAG_MEM_PRIV0 |
+ DRM_BO_FLAG_NO_EVICT,
+ DRM_BO_HINT_DONT_FENCE, 0x1, 0,
+ &dev_priv->ring_buffer);
+ if (ret < 0) {
+ DRM_ERROR("Unable to allocate ring buffer\n");
+ return -EINVAL;
+ }
+
+ /* remap the buffer object properly */
+ dev_priv->ring.Start = dev_priv->ring_buffer->offset;
+ dev_priv->ring.End = dev_priv->ring.Start + size;
+ dev_priv->ring.Size = size;
+ dev_priv->ring.tail_mask = dev_priv->ring.Size - 1;
+
+ /* FIXME: need wrapper with PCI mem checks */
+ ret = drm_mem_reg_ioremap(dev, &dev_priv->ring_buffer->mem,
+ (void **) &dev_priv->ring.virtual_start);
+ if (ret)
+ DRM_ERROR("error mapping ring buffer: %d\n", ret);
+
+ DRM_DEBUG("ring start %08lX, %p, %08lX\n", dev_priv->ring.Start,
+ dev_priv->ring.virtual_start, dev_priv->ring.Size);
+
+ dev_priv->sarea_priv->pf_current_page = 0;
+
+ memset((void *)(dev_priv->ring.virtual_start), 0, dev_priv->ring.Size);
+
+ I915_WRITE(LP_RING + RING_START, dev_priv->ring.Start);
+ I915_WRITE(LP_RING + RING_LEN,
+ ((dev_priv->ring.Size - 4096) & RING_NR_PAGES) |
+ (RING_NO_REPORT | RING_VALID));
+
+ /* We are using separate values as placeholders for mechanisms for
+ * private backbuffer/depthbuffer usage.
+ */
+ dev_priv->use_mi_batchbuffer_start = 0;
+
+ /* Allow hardware batchbuffers unless told otherwise.
+ */
+ dev_priv->allow_batchbuffer = 1;
+
+ /* Program Hardware Status Page */
+ dev_priv->status_page_dmah = drm_pci_alloc(dev, PAGE_SIZE, PAGE_SIZE,
+ 0xffffffff);
+
+ if (!dev_priv->status_page_dmah) {
+ dev->dev_private = (void *)dev_priv;
+ i915_dma_cleanup(dev);
+ DRM_ERROR("Can not allocate hardware status page\n");
+ return DRM_ERR(ENOMEM);
+ }
+ dev_priv->hw_status_page = dev_priv->status_page_dmah->vaddr;
+ dev_priv->dma_status_page = dev_priv->status_page_dmah->busaddr;
+
+ memset(dev_priv->hw_status_page, 0, PAGE_SIZE);
+ DRM_DEBUG("hw status page @ %p\n", dev_priv->hw_status_page);
+
+ I915_WRITE(I915REG_HWS_PGA, dev_priv->dma_status_page);
+ DRM_DEBUG("Enabled hardware status page\n");
+
+ intel_modeset_init(dev);
+ drm_initial_config(dev, false);
+
+ return 0;
+}
+
+int i915_driver_unload(drm_device_t *dev)
+{
+ drm_i915_private_t *dev_priv = dev->dev_private;
+
+ if (dev_priv->status_page_dmah) {
+ drm_pci_free(dev, dev_priv->status_page_dmah);
+ dev_priv->status_page_dmah = NULL;
+ dev_priv->hw_status_page = NULL;
+ dev_priv->dma_status_page = 0;
+ /* Need to rewrite hardware status page */
+ I915_WRITE(I915REG_HWS_PGA, 0x1ffff000);
+ }
+
+ I915_WRITE(LP_RING + RING_LEN, 0);
+
+ intel_modeset_cleanup(dev);
+
+ drm_mem_reg_iounmap(dev, &dev_priv->ring_buffer->mem,
+ dev_priv->ring.virtual_start);
+
+ DRM_DEBUG("usage is %d\n", atomic_read(&dev_priv->ring_buffer->usage));
+ mutex_lock(&dev->struct_mutex);
+ drm_bo_usage_deref_locked(dev_priv->ring_buffer);
+ mutex_unlock(&dev->struct_mutex);
+
+ if (drm_bo_clean_mm(dev, DRM_BO_MEM_PRIV0)) {
+ DRM_ERROR("Memory manager type 3 not clean. "
+ "Delaying takedown\n");
+ }
+
+ drm_bo_driver_finish(dev);
+
+ DRM_DEBUG("%p, %p\n", dev_priv->mmio_map, dev_priv->sarea);
+ drm_rmmap(dev, dev_priv->mmio_map);
+ drm_rmmap(dev, dev_priv->sarea);
+
+ drm_free(dev_priv, sizeof(*dev_priv), DRM_MEM_DRIVER);
+
+ dev->dev_private = NULL;
+ return 0;
+}
+
+void i915_driver_lastclose(drm_device_t * dev)
+{
+ drm_i915_private_t *dev_priv = dev->dev_private;
+
+ i915_mem_takedown(&(dev_priv->agp_heap));
+
+ i915_dma_cleanup(dev);
+
+}
+
+void i915_driver_preclose(drm_device_t * dev, DRMFILE filp)
+{
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ i915_mem_release(dev, filp, dev_priv->agp_heap);
+}
+
diff --git a/shared-core/i915_irq.c b/shared-core/i915_irq.c
index e3335458..4ceed3e3 100644
--- a/shared-core/i915_irq.c
+++ b/shared-core/i915_irq.c
@@ -496,7 +496,7 @@ int i915_irq_wait(DRM_IOCTL_ARGS)
return i915_wait_irq(dev, irqwait.irq_seq);
}
-static void i915_enable_interrupt (drm_device_t *dev)
+void i915_enable_interrupt (drm_device_t *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;