diff options
Diffstat (limited to 'shared-core')
| -rw-r--r-- | shared-core/i915_dma.c | 14 | ||||
| -rw-r--r-- | shared-core/i915_drv.h | 1531 | ||||
| -rw-r--r-- | shared-core/i915_init.c | 25 | ||||
| -rw-r--r-- | shared-core/i915_irq.c | 160 |
4 files changed, 720 insertions, 1010 deletions
diff --git a/shared-core/i915_dma.c b/shared-core/i915_dma.c index 498620f5..205daa60 100644 --- a/shared-core/i915_dma.c +++ b/shared-core/i915_dma.c @@ -40,11 +40,11 @@ int i915_wait_ring(struct drm_device * dev, int n, const char *caller) { struct drm_i915_private *dev_priv = dev->dev_private; struct drm_i915_ring_buffer *ring = &(dev_priv->ring); - u32 last_head = I915_READ(LP_RING + RING_HEAD) & HEAD_ADDR; + u32 last_head = I915_READ(PRB0_HEAD) & HEAD_ADDR; int i; for (i = 0; i < 10000; i++) { - ring->head = I915_READ(LP_RING + RING_HEAD) & HEAD_ADDR; + ring->head = I915_READ(PRB0_HEAD) & HEAD_ADDR; ring->space = ring->head - (ring->tail + 8); if (ring->space < 0) ring->space += ring->Size; @@ -71,8 +71,8 @@ void i915_kernel_lost_context(struct drm_device * dev) if (drm_core_check_feature(dev, DRIVER_MODESET)) return; - ring->head = I915_READ(LP_RING + RING_HEAD) & HEAD_ADDR; - ring->tail = I915_READ(LP_RING + RING_TAIL) & TAIL_ADDR; + ring->head = I915_READ(PRB0_HEAD) & HEAD_ADDR; + ring->tail = I915_READ(PRB0_TAIL) & TAIL_ADDR; ring->space = ring->head - (ring->tail + 8); if (ring->space < 0) ring->space += ring->Size; @@ -515,7 +515,7 @@ void i915_emit_breadcrumb(struct drm_device *dev) master_priv->sarea_priv->last_enqueue = dev_priv->counter; BEGIN_LP_RING(4); - OUT_RING(CMD_STORE_DWORD_IDX); + OUT_RING(MI_STORE_DWORD_INDEX); OUT_RING(20); OUT_RING(dev_priv->counter); OUT_RING(0); @@ -526,7 +526,7 @@ void i915_emit_breadcrumb(struct drm_device *dev) int i915_emit_mi_flush(struct drm_device *dev, uint32_t flush) { struct drm_i915_private *dev_priv = dev->dev_private; - uint32_t flush_cmd = CMD_MI_FLUSH; + uint32_t flush_cmd = MI_FLUSH; RING_LOCALS; flush_cmd |= flush; @@ -1027,7 +1027,7 @@ static int i915_set_status_page(struct drm_device *dev, void *data, dev_priv->hw_status_page = dev_priv->hws_map.handle; memset(dev_priv->hw_status_page, 0, PAGE_SIZE); - I915_WRITE(I915REG_HWS_PGA, dev_priv->status_gfx_addr); + I915_WRITE(HWS_PGA, dev_priv->status_gfx_addr); DRM_DEBUG("load hws 0x2080 with gfx mem 0x%x\n", dev_priv->status_gfx_addr); DRM_DEBUG("load hws at %p\n", dev_priv->hw_status_page); diff --git a/shared-core/i915_drv.h b/shared-core/i915_drv.h index 10e08c55..84cc60f3 100644 --- a/shared-core/i915_drv.h +++ b/shared-core/i915_drv.h @@ -69,6 +69,11 @@ #endif #define DRIVER_PATCHLEVEL 0 +enum pipe { + PIPE_A = 0, + PIPE_B, +}; + #ifdef I915_HAVE_BUFFER #define I915_MAX_VALIDATE_BUFFERS 4096 struct drm_i915_validate_buffer; @@ -202,7 +207,7 @@ struct drm_i915_private { u32 saveDSPASTRIDE; u32 saveDSPASIZE; u32 saveDSPAPOS; - u32 saveDSPABASE; + u32 saveDSPAADDR; u32 saveDSPASURF; u32 saveDSPATILEOFF; u32 savePFIT_PGM_RATIOS; @@ -223,24 +228,24 @@ struct drm_i915_private { u32 saveDSPBSTRIDE; u32 saveDSPBSIZE; u32 saveDSPBPOS; - u32 saveDSPBBASE; + u32 saveDSPBADDR; u32 saveDSPBSURF; u32 saveDSPBTILEOFF; - u32 saveVCLK_DIVISOR_VGA0; - u32 saveVCLK_DIVISOR_VGA1; - u32 saveVCLK_POST_DIV; + u32 saveVGA0; + u32 saveVGA1; + u32 saveVGA_PD; u32 saveVGACNTRL; u32 saveADPA; u32 saveLVDS; - u32 saveLVDSPP_ON; - u32 saveLVDSPP_OFF; + u32 savePP_ON_DELAYS; + u32 savePP_OFF_DELAYS; u32 saveDVOA; u32 saveDVOB; u32 saveDVOC; u32 savePP_ON; u32 savePP_OFF; u32 savePP_CONTROL; - u32 savePP_CYCLE; + u32 savePP_DIVISOR; u32 savePFIT_CONTROL; u32 save_palette_a[256]; u32 save_palette_b[256]; @@ -253,7 +258,7 @@ struct drm_i915_private { u32 saveIMR; u32 saveCACHE_MODE_0; u32 saveD_STATE; - u32 saveDSPCLK_GATE_D; + u32 saveCG_2D_DIS; u32 saveMI_ARB_STATE; u32 saveSWF0[16]; u32 saveSWF1[16]; @@ -382,6 +387,8 @@ extern void intel_modeset_cleanup(struct drm_device *dev); #define I915_VERBOSE 0 +#define PRIMARY_RINGBUFFER_SIZE (128*1024) + #define RING_LOCALS unsigned int outring, ringmask, outcount; \ volatile char *virt; @@ -409,10 +416,14 @@ extern void intel_modeset_cleanup(struct drm_device *dev); if (I915_VERBOSE) DRM_DEBUG("ADVANCE_LP_RING %x\n", outring); \ dev_priv->ring.tail = outring; \ dev_priv->ring.space -= outcount * 4; \ - I915_WRITE(LP_RING + RING_TAIL, outring); \ + I915_WRITE(PRB0_TAIL, outring); \ } while(0) -#define MI_NOOP (0x00 << 23) +#define BREADCRUMB_BITS 31 +#define BREADCRUMB_MASK ((1U << BREADCRUMB_BITS) - 1) + +#define READ_BREADCRUMB(dev_priv) (((volatile u32*)(dev_priv->hw_status_page))[5]) +#define READ_HWSP(dev_priv, reg) (((volatile u32*)(dev_priv->hw_status_page))[reg]) extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); @@ -437,8 +448,20 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); #define INTEL_915G_GMCH_GMS_STOLEN_48M (0x6 << 4) #define INTEL_915G_GMCH_GMS_STOLEN_64M (0x7 << 4) -/* Extended config space */ -#define LBB 0xf4 +/* PCI config space */ + +#define HPLLCC 0xc0 /* 855 only */ +#define GC_CLOCK_CONTROL_MASK (3 << 0) +#define GC_CLOCK_133_200 (0 << 0) +#define GC_CLOCK_100_200 (1 << 0) +#define GC_CLOCK_100_133 (2 << 0) +#define GC_CLOCK_166_250 (3 << 0) +#define GCFGC 0xf0 /* 915+ only */ +#define GC_LOW_FREQUENCY_ENABLE (1 << 7) +#define GC_DISPLAY_CLOCK_190_200_MHZ (0 << 4) +#define GC_DISPLAY_CLOCK_333_MHZ (4 << 4) +#define GC_DISPLAY_CLOCK_MASK (7 << 4) +#define LBB 0xf4 /* VGA stuff */ @@ -481,32 +504,146 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); #define VGA_CR_INDEX_CGA 0x3d4 #define VGA_CR_DATA_CGA 0x3d5 -#define GFX_OP_USER_INTERRUPT ((0<<29)|(2<<23)) -#define GFX_OP_BREAKPOINT_INTERRUPT ((0<<29)|(1<<23)) -#define CMD_REPORT_HEAD (7<<23) -#define CMD_STORE_DWORD_IMM ((0x20<<23) | (0x1 << 22) | 0x1) -#define CMD_STORE_DWORD_IDX ((0x21<<23) | 0x1) -#define CMD_OP_BATCH_BUFFER ((0x0<<29)|(0x30<<23)|0x1) - -#define CMD_MI_FLUSH (0x04 << 23) -#define MI_NO_WRITE_FLUSH (1 << 2) -#define MI_READ_FLUSH (1 << 0) -#define MI_EXE_FLUSH (1 << 1) -#define MI_END_SCENE (1 << 4) /* flush binner and incr scene count */ -#define MI_SCENE_COUNT (1 << 3) /* just increment scene count */ - -/* Packet to load a register value from the ring/batch command stream: +/* + * Memory interface instructions used by the kernel + */ +#define MI_INSTR(opcode, flags) (((opcode) << 23) | (flags)) + +#define MI_NOOP MI_INSTR(0, 0) +#define MI_USER_INTERRUPT MI_INSTR(0x02, 0) +#define MI_WAIT_FOR_EVENT MI_INSTR(0x03, 0) +#define MI_WAIT_FOR_PLANE_B_FLIP (1<<6) +#define MI_WAIT_FOR_PLANE_A_FLIP (1<<2) +#define MI_WAIT_FOR_PLANE_A_SCANLINES (1<<1) +#define MI_FLUSH MI_INSTR(0x04, 0) +#define MI_READ_FLUSH (1 << 0) +#define MI_EXE_FLUSH (1 << 1) +#define MI_NO_WRITE_FLUSH (1 << 2) +#define MI_SCENE_COUNT (1 << 3) /* just increment scene count */ +#define MI_END_SCENE (1 << 4) /* flush binner and incr scene count */ +#define MI_BATCH_BUFFER_END MI_INSTR(0x0a, 0) +#define MI_REPORT_HEAD MI_INSTR(0x07, 0) +#define MI_LOAD_SCAN_LINES_INCL MI_INSTR(0x12, 0) +#define MI_STORE_DWORD_IMM MI_INSTR(0x20, 1) /* used to have 1<<22? */ +#define MI_STORE_DWORD_INDEX MI_INSTR(0x21, 1) +#define MI_LOAD_REGISTER_IMM MI_INSTR(0x22, 1) +#define MI_BATCH_BUFFER MI_INSTR(0x30, 1) +#define MI_BATCH_NON_SECURE (1) +#define MI_BATCH_NON_SECURE_I965 (1<<8) +#define MI_BATCH_BUFFER_START MI_INSTR(0x31, 0) + +/* + * 3D instructions used by the kernel */ -#define CMD_MI_LOAD_REGISTER_IMM ((0x22 << 23)|0x1) +#define GFX_INSTR(opcode, flags) ((0x3 << 29) | ((opcode) << 24) | (flags)) -#define BB1_START_ADDR_MASK (~0x7) -#define BB1_PROTECTED (1<<0) -#define BB1_UNPROTECTED (0<<0) -#define BB2_END_ADDR_MASK (~0x7) +#define GFX_OP_RASTER_RULES ((0x3<<29)|(0x7<<24)) +#define GFX_OP_SCISSOR ((0x3<<29)|(0x1c<<24)|(0x10<<19)) +#define SC_UPDATE_SCISSOR (0x1<<1) +#define SC_ENABLE_MASK (0x1<<0) +#define SC_ENABLE (0x1<<0) +#define GFX_OP_LOAD_INDIRECT ((0x3<<29)|(0x1d<<24)|(0x7<<16)) +#define GFX_OP_SCISSOR_INFO ((0x3<<29)|(0x1d<<24)|(0x81<<16)|(0x1)) +#define SCI_YMIN_MASK (0xffff<<16) +#define SCI_XMIN_MASK (0xffff<<0) +#define SCI_YMAX_MASK (0xffff<<16) +#define SCI_XMAX_MASK (0xffff<<0) +#define GFX_OP_SCISSOR_ENABLE ((0x3<<29)|(0x1c<<24)|(0x10<<19)) +#define GFX_OP_SCISSOR_RECT ((0x3<<29)|(0x1d<<24)|(0x81<<16)|1) +#define GFX_OP_COLOR_FACTOR ((0x3<<29)|(0x1d<<24)|(0x1<<16)|0x0) +#define GFX_OP_STIPPLE ((0x3<<29)|(0x1d<<24)|(0x83<<16)) +#define GFX_OP_MAP_INFO ((0x3<<29)|(0x1d<<24)|0x4) +#define GFX_OP_DESTBUFFER_VARS ((0x3<<29)|(0x1d<<24)|(0x85<<16)|0x0) +#define GFX_OP_DRAWRECT_INFO ((0x3<<29)|(0x1d<<24)|(0x80<<16)|(0x3)) +#define GFX_OP_DRAWRECT_INFO_I965 ((0x7900<<16)|0x2) +#define SRC_COPY_BLT_CMD ((2<<29)|(0x43<<22)|4) +#define XY_SRC_COPY_BLT_CMD ((2<<29)|(0x53<<22)|6) +#define XY_MONO_SRC_COPY_IMM_BLT ((2<<29)|(0x71<<22)|5) +#define XY_SRC_COPY_BLT_WRITE_ALPHA (1<<21) +#define XY_SRC_COPY_BLT_WRITE_RGB (1<<20) +#define BLT_DEPTH_8 (0<<24) +#define BLT_DEPTH_16_565 (1<<24) +#define BLT_DEPTH_16_1555 (2<<24) +#define BLT_DEPTH_32 (3<<24) +#define BLT_ROP_GXCOPY (0xcc<<16) +#define XY_SRC_COPY_BLT_SRC_TILED (1<<15) +#define XY_SRC_COPY_BLT_DST_TILED (1<<11) +#define CMD_OP_DISPLAYBUFFER_INFO ((0x0<<29)|(0x14<<23)|2) +#define ASYNC_FLIP (1<<22) +#define DISPLAY_PLANE_A (0<<20) +#define DISPLAY_PLANE_B (1<<20) -#define I915REG_HWS_PGA 0x02080 +/* + * Instruction and interrupt control regs + */ + +#define PRB0_TAIL 0x02030 +#define PRB0_HEAD 0x02034 +#define PRB0_START 0x02038 +#define PRB0_CTL 0x0203c +#define TAIL_ADDR 0x001FFFF8 +#define HEAD_WRAP_COUNT 0xFFE00000 +#define HEAD_WRAP_ONE 0x00200000 +#define HEAD_ADDR 0x001FFFFC +#define START_ADDR 0x0xFFFFF000 +#define RING_NR_PAGES 0x001FF000 +#define RING_REPORT_MASK 0x00000006 +#define RING_REPORT_64K 0x00000002 +#define RING_REPORT_128K 0x00000004 +#define RING_NO_REPORT 0x00000000 +#define RING_VALID_MASK 0x00000001 +#define RING_VALID 0x00000001 +#define RING_INVALID 0x00000000 +#define PRB1_TAIL 0x02040 /* 915+ only */ +#define PRB1_HEAD 0x02044 /* 915+ only */ +#define PRB1_START 0x02048 /* 915+ only */ +#define PRB1_CTL 0x0204c /* 915+ only */ +#define HWS_PGA 0x02080 +#define IPEIR 0x02088 +#define NOPID 0x02094 +#define HWSTAM 0x02098 +#define SCPD0 0x0209c /* 915+ only */ +#define IER 0x020a0 +#define IIR 0x020a4 +#define IMR 0x020a8 +#define ISR 0x020ac +#define I915_PIPE_CONTROL_NOTIFY_INTERRUPT (1<<18) +#define I915_DISPLAY_PORT_INTERRUPT (1<<17) +#define I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT (1<<15) +#define I915_GMCH_THERMAL_SENSOR_EVENT_INTERRUPT (1<<14) +#define I915_HWB_OOM_INTERRUPT (1<<13) +#define I915_SYNC_STATUS_INTERRUPT (1<<12) +#define I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT (1<<11) +#define I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT (1<<10) +#define I915_OVERLAY_PLANE_FLIP_PENDING_INTERRUPT (1<<9) +#define I915_DISPLAY_PLANE_C_FLIP_PENDING_INTERRUPT (1<<8) +#define I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT (1<<7) +#define I915_DISPLAY_PIPE_A_EVENT_INTERRUPT (1<<6) +#define I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT (1<<5) +#define I915_DISPLAY_PIPE_B_EVENT_INTERRUPT (1<<4) +#define I915_DEBUG_INTERRUPT (1<<2) +#define I915_USER_INTERRUPT (1<<1) +#define EIR 0x020b0 +#define EMR 0x020b4 +#define ESR 0x020b8 +#define INSTPM 0x020c0 +#define FW_BLC 0x020d8 +#define FW_BLC_SELF 0x020e0 /* 915+ only */ +#define MI_ARB_STATE 0x020e4 /* 915+ only */ +#define CACHE_MODE_0 0x02120 /* 915+ only */ +#define CM0_MASK_SHIFT 16 +#define CM0_IZ_OPT_DISABLE (1<<6) +#define CM0_ZR_OPT_DISABLE (1<<5) +#define CM0_DEPTH_EVICT_DISABLE (1<<4) +#define CM0_COLOR_EVICT_DISABLE (1<<3) +#define CM0_DEPTH_WRITE_DISABLE (1<<1) +#define CM0_RC_OP_FLUSH_DISABLE (1<<0) +#define GFX_FLSH_CNTL 0x02170 /* 915+ only */ + +/* + * Framebuffer compression (915+ only) + */ -/* Framebuffer compression */ #define FBC_CFB_BASE 0x03200 /* 4k page aligned */ #define FBC_LL_BASE 0x03204 /* 4k page aligned */ #define FBC_CONTROL 0x03208 @@ -535,77 +672,10 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); #define FBC_FENCE_OFF 0x0321b #define FBC_LL_SIZE (1536) -#define FBC_LL_PAD (32) - -/* Interrupt bits: - */ -#define I915_PIPE_CONTROL_NOTIFY_INTERRUPT (1<<18) -#define I915_DISPLAY_PORT_INTERRUPT (1<<17) -#define I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT (1<<15) -#define I915_GMCH_THERMAL_SENSOR_EVENT_INTERRUPT (1<<14) -#define I915_HWB_OOM_INTERRUPT (1<<13) /* binner out of memory */ -#define I915_SYNC_STATUS_INTERRUPT (1<<12) -#define I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT (1<<11) -#define I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT (1<<10) -#define I915_OVERLAY_PLANE_FLIP_PENDING_INTERRUPT (1<<9) -#define I915_DISPLAY_PLANE_C_FLIP_PENDING_INTERRUPT (1<<8) -#define I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT (1<<7) -#define I915_DISPLAY_PIPE_A_EVENT_INTERRUPT (1<<6) -#define I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT (1<<5) -#define I915_DISPLAY_PIPE_B_EVENT_INTERRUPT (1<<4) -#define I915_DEBUG_INTERRUPT (1<<2) -#define I915_USER_INTERRUPT (1<<1) - - -#define I915REG_HWSTAM 0x02098 -#define I915REG_INT_IDENTITY_R 0x020a4 -#define I915REG_INT_MASK_R 0x020a8 -#define I915REG_INT_ENABLE_R 0x020a0 -#define I915REG_INSTPM 0x020c0 - -#define PIPEADSL 0x70000 -#define PIPEBDSL 0x71000 - -#define I915REG_PIPEASTAT 0x70024 -#define I915REG_PIPEBSTAT 0x71024 - -#define I915_VBLANK_INTERRUPT_ENABLE (1UL<<17) -#define I915_HOTPLUG_INTERRUPT_ENABLE (1UL<<26) -#define I915_HOTPLUG_TV_INTERRUPT_ENABLE (1UL<<18) -#define I915_HOTPLUG_CLEAR (1UL<<10) -#define I915_HOTPLUG_TV_CLEAR (1UL<<2) -#define I915_VBLANK_CLEAR (1UL<<1) - -/* - * The two pipe frame counter registers are not synchronized, so - * reading a stable value is somewhat tricky. The following code - * should work: - * - * do { - * high1 = ((INREG(PIPEAFRAMEHIGH) & PIPE_FRAME_HIGH_MASK) >> - * PIPE_FRAME_HIGH_SHIFT; - * low1 = ((INREG(PIPEAFRAMEPIXEL) & PIPE_FRAME_LOW_MASK) >> - * PIPE_FRAME_LOW_SHIFT); - * high2 = ((INREG(PIPEAFRAMEHIGH) & PIPE_FRAME_HIGH_MASK) >> - * PIPE_FRAME_HIGH_SHIFT); - * } while (high1 != high2); - * frame = (high1 << 8) | low1; - */ -#define PIPEAFRAMEHIGH 0x70040 -#define PIPEBFRAMEHIGH 0x71040 -#define PIPE_FRAME_HIGH_MASK 0x0000ffff -#define PIPE_FRAME_HIGH_SHIFT 0 -#define PIPEAFRAMEPIXEL 0x70044 -#define PIPEBFRAMEPIXEL 0x71044 -#define PIPE_FRAME_LOW_MASK 0xff000000 -#define PIPE_FRAME_LOW_SHIFT 24 /* - * Pixel within the current frame is counted in the PIPEAFRAMEPIXEL register - * and is 24 bits wide. + * GPIO regs */ -#define PIPE_PIXEL_MASK 0x00ffffff -#define PIPE_PIXEL_SHIFT 0 #define GPIOA 0x5010 #define GPIOB 0x5014 @@ -630,520 +700,82 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); # define GPIO_DATA_VAL_IN (1 << 12) # define GPIO_DATA_PULLUP_DISABLE (1 << 13) -/* p317, 319 - */ -#define VCLK2_VCO_M 0x6008 /* treat as 16 bit? (includes msbs) */ -#define VCLK2_VCO_N 0x600a -#define VCLK2_VCO_DIV_SEL 0x6012 - -#define VCLK_DIVISOR_VGA0 0x6000 -#define VCLK_DIVISOR_VGA1 0x6004 -#define VCLK_POST_DIV 0x6010 -/** Selects a post divisor of 4 instead of 2. */ -# define VGA1_PD_P2_DIV_4 (1 << 15) -/** Overrides the p2 post divisor field */ -# define VGA1_PD_P1_DIV_2 (1 << 13) -# define VGA1_PD_P1_SHIFT 8 -/** P1 value is 2 greater than this field */ -# define VGA1_PD_P1_MASK (0x1f << 8) -/** Selects a post divisor of 4 instead of 2. */ -# define VGA0_PD_P2_DIV_4 (1 << 7) -/** Overrides the p2 post divisor field */ -# define VGA0_PD_P1_DIV_2 (1 << 5) -# define VGA0_PD_P1_SHIFT 0 -/** P1 value is 2 greater than this field */ -# define VGA0_PD_P1_MASK (0x1f << 0) - -#define POST_DIV_SELECT 0x70 -#define POST_DIV_1 0x00 -#define POST_DIV_2 0x10 -#define POST_DIV_4 0x20 -#define POST_DIV_8 0x30 -#define POST_DIV_16 0x40 -#define POST_DIV_32 0x50 -#define VCO_LOOP_DIV_BY_4M 0x00 -#define VCO_LOOP_DIV_BY_16M 0x04 - -#define I915_FIFO_UNDERRUN_STATUS (1UL<<31) -#define I915_CRC_ERROR_ENABLE (1UL<<29) -#define I915_CRC_DONE_ENABLE (1UL<<28) -#define I915_GMBUS_EVENT_ENABLE (1UL<<27) -#define I915_HOTPLUG_INTERRUPT_ENABLE (1UL<<26) -#define I915_VSYNC_INTERRUPT_ENABLE (1UL<<25) -#define I915_DISPLAY_LINE_COMPARE_ENABLE (1UL<<24) -#define I915_DPST_EVENT_ENABLE (1UL<<23) -#define I915_LEGACY_BLC_EVENT_ENABLE (1UL<<22) -#define I915_ODD_FIELD_INTERRUPT_ENABLE (1UL<<21) -#define I915_EVEN_FIELD_INTERRUPT_ENABLE (1UL<<20) -#define I915_START_VBLANK_INTERRUPT_ENABLE (1UL<<18) /* 965 or later */ -#define I915_VBLANK_INTERRUPT_ENABLE (1UL<<17) -#define I915_OVERLAY_UPDATED_ENABLE (1UL<<16) -#define I915_CRC_ERROR_INTERRUPT_STATUS (1UL<<13) -#define I915_CRC_DONE_INTERRUPT_STATUS (1UL<<12) -#define I915_GMBUS_INTERRUPT_STATUS (1UL<<11) -#define I915_HOTPLUG_INTERRUPT_STATUS (1UL<<10) -#define I915_VSYNC_INTERRUPT_STATUS (1UL<<9) -#define I915_DISPLAY_LINE_COMPARE_STATUS (1UL<<8) -#define I915_DPST_EVENT_STATUS (1UL<<7) -#define I915_LEGACY_BLC_EVENT_STATUS (1UL<<6) -#define I915_ODD_FIELD_INTERRUPT_STATUS (1UL<<5) -#define I915_EVEN_FIELD_INTERRUPT_STATUS (1UL<<4) -#define I915_HOTPLUG_TV_INTERRUPT_STATUS (1UL<<2) -#define I915_START_VBLANK_INTERRUPT_STATUS (1UL<<2) /* 965 or later */ -#define I915_VBLANK_INTERRUPT_STATUS (1UL<<1) -#define I915_OVERLAY_UPDATED_STATUS (1UL<<0) - -#define SRX_INDEX 0x3c4 -#define SRX_DATA 0x3c5 -#define SR01 1 -#define SR01_SCREEN_OFF (1<<5) - -#define PPCR 0x61204 -#define PPCR_ON (1<<0) - -#define DVOA 0x61120 -#define DVOB 0x61140 -#define DVOC 0x61160 -#define DVO_ENABLE (1 << 31) -#define DVO_PIPE_B_SELECT (1 << 30) -#define DVO_PIPE_STALL_UNUSED (0 << 28) -#define DVO_PIPE_STALL (1 << 28) -#define DVO_PIPE_STALL_TV (2 << 28) -#define DVO_PIPE_STALL_MASK (3 << 28) -#define DVO_USE_VGA_SYNC (1 << 15) -#define DVO_DATA_ORDER_I740 (0 << 14) -#define DVO_DATA_ORDER_FP (1 << 14) -#define DVO_VSYNC_DISABLE (1 << 11) -#define DVO_HSYNC_DISABLE (1 << 10) -#define DVO_VSYNC_TRISTATE (1 << 9) -#define DVO_HSYNC_TRISTATE (1 << 8) -#define DVO_BORDER_ENABLE (1 << 7) -#define DVO_DATA_ORDER_GBRG (1 << 6) -#define DVO_DATA_ORDER_RGGB (0 << 6) -#define DVO_DATA_ORDER_GBRG_ERRATA (0 << 6) -#define DVO_DATA_ORDER_RGGB_ERRATA (1 << 6) -#define DVO_VSYNC_ACTIVE_HIGH (1 << 4) -#define DVO_HSYNC_ACTIVE_HIGH (1 << 3) -#define DVO_BLANK_ACTIVE_HIGH (1 << 2) -#define DVO_OUTPUT_CSTATE_PIXELS (1 << 1) /* SDG only */ -#define DVO_OUTPUT_SOURCE_SIZE_PIXELS (1 << 0) /* SDG only */ -#define DVO_PRESERVE_MASK (0x7<<24) - -#define DVOA_SRCDIM 0x61124 -#define DVOB_SRCDIM 0x61144 -#define DVOC_SRCDIM 0x61164 -#define DVO_SRCDIM_HORIZONTAL_SHIFT 12 -#define DVO_SRCDIM_VERTICAL_SHIFT 0 - -#define LVDS 0x61180 -#define LVDS_ON (1<<31) - -#define ADPA 0x61100 -#define ADPA_DPMS_MASK (~(3<<10)) -#define ADPA_DPMS_ON (0<<10) -#define ADPA_DPMS_SUSPEND (1<<10) -#define ADPA_DPMS_STANDBY (2<<10) -#define ADPA_DPMS_OFF (3<<10) - -#define NOPID 0x2094 -#define LP_RING 0x2030 -#define HP_RING 0x2040 -/* The binner has its own ring buffer: - */ -#define HWB_RING 0x2400 - -#define RING_TAIL 0x00 -#define TAIL_ADDR 0x001FFFF8 -#define RING_HEAD 0x04 -#define HEAD_WRAP_COUNT 0xFFE00000 -#define HEAD_WRAP_ONE 0x00200000 -#define HEAD_ADDR 0x001FFFFC -#define RING_START 0x08 -#define START_ADDR 0x0xFFFFF000 -#define RING_LEN 0x0C -#define RING_NR_PAGES 0x001FF000 -#define RING_REPORT_MASK 0x00000006 -#define RING_REPORT_64K 0x00000002 -#define RING_REPORT_128K 0x00000004 -#define RING_NO_REPORT 0x00000000 -#define RING_VALID_MASK 0x00000001 -#define RING_VALID 0x00000001 -#define RING_INVALID 0x00000000 - -/* Instruction parser error reg: - */ -#define IPEIR 0x2088 - -/* Scratch pad debug 0 reg: - */ -#define SCPD0 0x209c - -/* Error status reg: - */ -#define ESR 0x20b8 - -/* Secondary DMA fetch address debug reg: - */ -#define DMA_FADD_S 0x20d4 - -/* Memory Interface Arbitration State - */ -#define MI_ARB_STATE 0x20e4 - -/* Cache mode 0 reg. - * - Manipulating render cache behaviour is central - * to the concept of zone rendering, tuning this reg can help avoid - * unnecessary render cache reads and even writes (for z/stencil) - * at beginning and end of scene. - * - * - To change a bit, write to this reg with a mask bit set and the - * bit of interest either set or cleared. EG: (BIT<<16) | BIT to set. - */ -#define Cache_Mode_0 0x2120 -#define CACHE_MODE_0 0x2120 -#define CM0_MASK_SHIFT 16 -#define CM0_IZ_OPT_DISABLE (1<<6) -#define CM0_ZR_OPT_DISABLE (1<<5) -#define CM0_DEPTH_EVICT_DISABLE (1<<4) -#define CM0_COLOR_EVICT_DISABLE (1<<3) -#define CM0_DEPTH_WRITE_DISABLE (1<<1) -#define CM0_RC_OP_FLUSH_DISABLE (1<<0) - - -/* Graphics flush control. A CPU write flushes the GWB of all writes. - * The data is discarded. - */ -#define GFX_FLSH_CNTL 0x2170 - -/* Binner control. Defines the location of the bin pointer list: - */ -#define BINCTL 0x2420 -#define BC_MASK (1 << 9) - -/* Binned scene info. - */ -#define BINSCENE 0x2428 -#define BS_OP_LOAD (1 << 8) -#define BS_MASK (1 << 22) - -/* Bin command parser debug reg: - */ -#define BCPD 0x2480 - -/* Bin memory control debug reg: - */ -#define BMCD 0x2484 - -/* Bin data cache debug reg: - */ -#define BDCD 0x2488 - -/* Binner pointer cache debug reg: - */ -#define BPCD 0x248c - -/* Binner scratch pad debug reg: - */ -#define BINSKPD 0x24f0 - -/* HWB scratch pad debug reg: - */ -#define HWBSKPD 0x24f4 - -/* Binner memory pool reg: - */ -#define BMP_BUFFER 0x2430 -#define BMP_PAGE_SIZE_4K (0 << 10) -#define BMP_BUFFER_SIZE_SHIFT 1 -#define BMP_ENABLE (1 << 0) - -/* Get/put memory from the binner memory pool: - */ -#define BMP_GET 0x2438 -#define BMP_PUT 0x2440 -#define BMP_OFFSET_SHIFT 5 - -/* 3D state packets: - */ -#define GFX_OP_RASTER_RULES ((0x3<<29)|(0x7<<24)) - -#define GFX_OP_SCISSOR ((0x3<<29)|(0x1c<<24)|(0x10<<19)) -#define SC_UPDATE_SCISSOR (0x1<<1) -#define SC_ENABLE_MASK (0x1<<0) -#define SC_ENABLE (0x1<<0) - -#define GFX_OP_LOAD_INDIRECT ((0x3<<29)|(0x1d<<24)|(0x7<<16)) - -#define GFX_OP_SCISSOR_INFO ((0x3<<29)|(0x1d<<24)|(0x81<<16)|(0x1)) -#define SCI_YMIN_MASK (0xffff<<16) -#define SCI_XMIN_MASK (0xffff<<0) -#define SCI_YMAX_MASK (0xffff<<16) -#define SCI_XMAX_MASK (0xffff<<0) - -#define GFX_OP_SCISSOR_ENABLE ((0x3<<29)|(0x1c<<24)|(0x10<<19)) -#define GFX_OP_SCISSOR_RECT ((0x3<<29)|(0x1d<<24)|(0x81<<16)|1) -#define GFX_OP_COLOR_FACTOR ((0x3<<29)|(0x1d<<24)|(0x1<<16)|0x0) -#define GFX_OP_STIPPLE ((0x3<<29)|(0x1d<<24)|(0x83<<16)) -#define GFX_OP_MAP_INFO ((0x3<<29)|(0x1d<<24)|0x4) -#define GFX_OP_DESTBUFFER_VARS ((0x3<<29)|(0x1d<<24)|(0x85<<16)|0x0) -#define GFX_OP_DRAWRECT_INFO ((0x3<<29)|(0x1d<<24)|(0x80<<16)|(0x3)) - -#define GFX_OP_DRAWRECT_INFO_I965 ((0x7900<<16)|0x2) - -#define SRC_COPY_BLT_CMD ((2<<29)|(0x43<<22)|4) -#define XY_SRC_COPY_BLT_CMD ((2<<29)|(0x53<<22)|6) -#define XY_MONO_SRC_COPY_IMM_BLT ((2<<29)|(0x71<<22)|5) -#define XY_SRC_COPY_BLT_WRITE_ALPHA (1<<21) -#define XY_SRC_COPY_BLT_WRITE_RGB (1<<20) -#define BLT_DEPTH_8 (0<<24) -#define BLT_DEPTH_16_565 (1<<24) -#define BLT_DEPTH_16_1555 (2<<24) -#define BLT_DEPTH_32 (3<<24) -#define BLT_ROP_GXCOPY (0xcc<<16) -#define XY_SRC_COPY_BLT_SRC_TILED (1<<15) -#define XY_SRC_COPY_BLT_DST_TILED (1<<11) - -#define MI_BATCH_BUFFER ((0x30<<23)|1) -#define MI_BATCH_BUFFER_START (0x31<<23) -#define MI_BATCH_BUFFER_END (0xA<<23) -#define MI_BATCH_NON_SECURE (1) - -#define MI_BATCH_NON_SECURE_I965 (1<<8) - -#define MI_WAIT_FOR_EVENT ((0x3<<23)) -#define MI_WAIT_FOR_PLANE_B_FLIP (1<<6) -#define MI_WAIT_FOR_PLANE_A_FLIP (1<<2) -#define MI_WAIT_FOR_PLANE_A_SCANLINES (1<<1) - -#define MI_LOAD_SCAN_LINES_INCL ((0x12<<23)) - -#define CMD_OP_DISPLAYBUFFER_INFO ((0x0<<29)|(0x14<<23)|2) -#define ASYNC_FLIP (1<<22) -#define DISPLAY_PLANE_A (0<<20) -#define DISPLAY_PLANE_B (1<<20) - -/* Display regs */ -#define DSPACNTR 0x70180 -#define DSPBCNTR 0x71180 -#define DISPPLANE_SEL_PIPE_MASK (1<<24) - -/* Define the region of interest for the binner: - */ -#define CMD_OP_BIN_CONTROL ((0x3<<29)|(0x1d<<24)|(0x84<<16)|4) - -#define CMD_OP_DESTBUFFER_INFO ((0x3<<29)|(0x1d<<24)|(0x8e<<16)|1) - -#define BREADCRUMB_BITS 31 -#define BREADCRUMB_MASK ((1U << BREADCRUMB_BITS) - 1) - -#define READ_BREADCRUMB(dev_priv) (((volatile u32*)(dev_priv->hw_status_page))[5]) -#define READ_HWSP(dev_priv, reg) (((volatile u32*)(dev_priv->hw_status_page))[reg]) - -#define BLC_PWM_CTL 0x61254 -#define BACKLIGHT_MODULATION_FREQ_SHIFT (17) - -#define BLC_PWM_CTL2 0x61250 - -/** - * This is the most significant 15 bits of the number of backlight cycles in a - * complete cycle of the modulated backlight control. - * - * The actual value is this field multiplied by two. - */ -#define BACKLIGHT_MODULATION_FREQ_MASK (0x7fff << 17) -#define BLM_LEGACY_MODE (1 << 16) -/** - * This is the number of cycles out of the backlight modulation cycle for which - * the backlight is on. - * - * This field must be no greater than the number of cycles in the complete - * backlight modulation cycle. - */ -#define BACKLIGHT_DUTY_CYCLE_SHIFT (0) -#define BACKLIGHT_DUTY_CYCLE_MASK (0xffff) - -#define I915_GCFGC 0xf0 -#define I915_LOW_FREQUENCY_ENABLE (1 << 7) -#define I915_DISPLAY_CLOCK_190_200_MHZ (0 << 4) -#define I915_DISPLAY_CLOCK_333_MHZ (4 << 4) -#define I915_DISPLAY_CLOCK_MASK (7 << 4) - -#define I855_HPLLCC 0xc0 -#define I855_CLOCK_CONTROL_MASK (3 << 0) -#define I855_CLOCK_133_200 (0 << 0) -#define I855_CLOCK_100_200 (1 << 0) -#define I855_CLOCK_100_133 (2 << 0) -#define I855_CLOCK_166_250 (3 << 0) - -/* p317, 319 - */ -#define VCLK2_VCO_M 0x6008 /* treat as 16 bit? (includes msbs) */ -#define VCLK2_VCO_N 0x600a -#define VCLK2_VCO_DIV_SEL 0x6012 - -#define VCLK_DIVISOR_VGA0 0x6000 -#define VCLK_DIVISOR_VGA1 0x6004 -#define VCLK_POST_DIV 0x6010 -/** Selects a post divisor of 4 instead of 2. */ -# define VGA1_PD_P2_DIV_4 (1 << 15) -/** Overrides the p2 post divisor field */ -# define VGA1_PD_P1_DIV_2 (1 << 13) -# define VGA1_PD_P1_SHIFT 8 -/** P1 value is 2 greater than this field */ -# define VGA1_PD_P1_MASK (0x1f << 8) -/** Selects a post divisor of 4 instead of 2. */ -# define VGA0_PD_P2_DIV_4 (1 << 7) -/** Overrides the p2 post divisor field */ -# define VGA0_PD_P1_DIV_2 (1 << 5) -# define VGA0_PD_P1_SHIFT 0 -/** P1 value is 2 greater than this field */ -# define VGA0_PD_P1_MASK (0x1f << 0) - -/* PCI D state control register */ -#define D_STATE 0x6104 -#define DSPCLK_GATE_D 0x6200 - -/* I830 CRTC registers */ -#define HTOTAL_A 0x60000 -#define HBLANK_A 0x60004 -#define HSYNC_A 0x60008 -#define VTOTAL_A 0x6000c -#define VBLANK_A 0x60010 -#define VSYNC_A 0x60014 -#define PIPEASRC 0x6001c -#define BCLRPAT_A 0x60020 -#define VSYNCSHIFT_A 0x60028 - -#define HTOTAL_B 0x61000 -#define HBLANK_B 0x61004 -#define HSYNC_B 0x61008 -#define VTOTAL_B 0x6100c -#define VBLANK_B 0x61010 -#define VSYNC_B 0x61014 -#define PIPEBSRC 0x6101c -#define BCLRPAT_B 0x61020 -#define VSYNCSHIFT_B 0x61028 - -#define HACTIVE_MASK 0x00000fff -#define VTOTAL_MASK 0x00001fff -#define VTOTAL_SHIFT 16 -#define VACTIVE_MASK 0x00000fff -#define VBLANK_END_MASK 0x00001fff -#define VBLANK_END_SHIFT 16 -#define VBLANK_START_MASK 0x00001fff - -#define PP_STATUS 0x61200 -# define PP_ON (1 << 31) -/** - * Indicates that all dependencies of the panel are on: - * - * - PLL enabled - * - pipe enabled - * - LVDS/DVOB/DVOC on - */ -# define PP_READY (1 << 30) -# define PP_SEQUENCE_NONE (0 << 28) -# define PP_SEQUENCE_ON (1 << 28) -# define PP_SEQUENCE_OFF (2 << 28) -# define PP_SEQUENCE_MASK 0x30000000 -#define PP_CONTROL 0x61204 -# define POWER_TARGET_ON (1 << 0) - -#define LVDSPP_ON 0x61208 -#define LVDSPP_OFF 0x6120c -#define PP_CYCLE 0x61210 - -#define PFIT_CONTROL 0x61230 -# define PFIT_ENABLE (1 << 31) -# define PFIT_PIPE_MASK (3 << 29) -# define PFIT_PIPE_SHIFT 29 -# define VERT_INTERP_DISABLE (0 << 10) -# define VERT_INTERP_BILINEAR (1 << 10) -# define VERT_INTERP_MASK (3 << 10) -# define VERT_AUTO_SCALE (1 << 9) -# define HORIZ_INTERP_DISABLE (0 << 6) -# define HORIZ_INTERP_BILINEAR (1 << 6) -# define HORIZ_INTERP_MASK (3 << 6) -# define HORIZ_AUTO_SCALE (1 << 5) -# define PANEL_8TO6_DITHER_ENABLE (1 << 3) - -#define PFIT_PGM_RATIOS 0x61234 -# define PFIT_VERT_SCALE_MASK 0xfff00000 -# define PFIT_HORIZ_SCALE_MASK 0x0000fff0 - -#define PFIT_AUTO_RATIOS 0x61238 - - -#define DPLL_A 0x06014 -#define DPLL_B 0x06018 -# define DPLL_VCO_ENABLE (1 << 31) -# define DPLL_DVO_HIGH_SPEED (1 << 30) -# define DPLL_SYNCLOCK_ENABLE (1 << 29) -# define DPLL_VGA_MODE_DIS (1 << 28) -# define DPLLB_MODE_DAC_SERIAL (1 << 26) /* i915 */ -# define DPLLB_MODE_LVDS (2 << 26) /* i915 */ -# define DPLL_MODE_MASK (3 << 26) -# define DPLL_DAC_SERIAL_P2_CLOCK_DIV_10 (0 << 24) /* i915 */ -# define DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 (1 << 24) /* i915 */ -# define DPLLB_LVDS_P2_CLOCK_DIV_14 (0 << 24) /* i915 */ -# define DPLLB_LVDS_P2_CLOCK_DIV_7 (1 << 24) /* i915 */ -# define DPLL_P2_CLOCK_DIV_MASK 0x03000000 /* i915 */ -# define DPLL_FPA01_P1_POST_DIV_MASK 0x00ff0000 /* i915 */ -/** +/* + * Clock control & power management + */ + +#define VGA0 0x6000 +#define VGA1 0x6004 +#define VGA_PD 0x6010 +#define VGA0_PD_P2_DIV_4 (1 << 7) +#define VGA0_PD_P1_DIV_2 (1 << 5) +#define VGA0_PD_P1_SHIFT 0 +#define VGA0_PD_P1_MASK (0x1f << 0) +#define VGA1_PD_P2_DIV_4 (1 << 15) +#define VGA1_PD_P1_DIV_2 (1 << 13) +#define VGA1_PD_P1_SHIFT 8 +#define VGA1_PD_P1_MASK (0x1f << 8) +#define DPLL_A 0x06014 +#define DPLL_B 0x06018 +#define DPLL_VCO_ENABLE (1 << 31) +#define DPLL_DVO_HIGH_SPEED (1 << 30) +#define DPLL_SYNCLOCK_ENABLE (1 << 29) +#define DPLL_VGA_MODE_DIS (1 << 28) +#define DPLLB_MODE_DAC_SERIAL (1 << 26) /* i915 */ +#define DPLLB_MODE_LVDS (2 << 26) /* i915 */ +#define DPLL_MODE_MASK (3 << 26) +#define DPLL_DAC_SERIAL_P2_CLOCK_DIV_10 (0 << 24) /* i915 */ +#define DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 (1 << 24) /* i915 */ +#define DPLLB_LVDS_P2_CLOCK_DIV_14 (0 << 24) /* i915 */ +#define DPLLB_LVDS_P2_CLOCK_DIV_7 (1 << 24) /* i915 */ +#define DPLL_P2_CLOCK_DIV_MASK 0x03000000 /* i915 */ +#define DPLL_FPA01_P1_POST_DIV_MASK 0x00ff0000 /* i915 */ +/* * The i830 generation, in DAC/serial mode, defines p1 as two plus this * bitfield, or just 2 if PLL_P1_DIVIDE_BY_TWO is set. */ -# define DPLL_FPA01_P1_POST_DIV_MASK_I830 0x001f0000 -/** +#define DPLL_FPA01_P1_POST_DIV_MASK_I830 0x001f0000 +/* * The i830 generation, in LVDS mode, defines P1 as the bit number set within * this field (only one bit may be set). */ -# define DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS 0x003f0000 -# define DPLL_FPA01_P1_POST_DIV_SHIFT 16 -# define PLL_P2_DIVIDE_BY_4 (1 << 23) /* i830, required in DVO non-gang */ -# define PLL_P1_DIVIDE_BY_TWO (1 << 21) /* i830 */ -# define PLL_REF_INPUT_DREFCLK (0 << 13) -# define PLL_REF_INPUT_TVCLKINA (1 << 13) /* i830 */ -# define PLL_REF_INPUT_TVCLKINBC (2 << 13) /* SDVO TVCLKIN */ -# define PLLB_REF_INPUT_SPREADSPECTRUMIN (3 << 13) -# define PLL_REF_INPUT_MASK (3 << 13) -# define PLL_LOAD_PULSE_PHASE_SHIFT 9 +#define DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS 0x003f0000 +#define DPLL_FPA01_P1_POST_DIV_SHIFT 16 +/* i830, required in DVO non-gang */ +#define PLL_P2_DIVIDE_BY_4 (1 << 23) +#define PLL_P1_DIVIDE_BY_TWO (1 << 21) /* i830 */ +#define PLL_REF_INPUT_DREFCLK (0 << 13) +#define PLL_REF_INPUT_TVCLKINA (1 << 13) /* i830 */ +#define PLL_REF_INPUT_TVCLKINBC (2 << 13) /* SDVO TVCLKIN */ +#define PLLB_REF_INPUT_SPREADSPECTRUMIN (3 << 13) +#define PLL_REF_INPUT_MASK (3 << 13) +#define PLL_LOAD_PULSE_PHASE_SHIFT 9 /* * Parallel to Serial Load Pulse phase selection. * Selects the phase for the 10X DPLL clock for the PCIe * digital display port. The range is 4 to 13; 10 or more * is just a flip delay. The default is 6 */ -# define PLL_LOAD_PULSE_PHASE_MASK (0xf << PLL_LOAD_PULSE_PHASE_SHIFT) -# define DISPLAY_RATE_SELECT_FPA1 (1 << 8) - -/** +#define PLL_LOAD_PULSE_PHASE_MASK (0xf << PLL_LOAD_PULSE_PHASE_SHIFT) +#define DISPLAY_RATE_SELECT_FPA1 (1 << 8) +/* * SDVO multiplier for 945G/GM. Not used on 965. - * - * \sa DPLL_MD_UDI_MULTIPLIER_MASK - */ -# define SDVO_MULTIPLIER_MASK 0x000000ff -# define SDVO_MULTIPLIER_SHIFT_HIRES 4 -# define SDVO_MULTIPLIER_SHIFT_VGA 0 - -/** @defgroup DPLL_MD - * @{ */ -/** Pipe A SDVO/UDI clock multiplier/divider register for G965. */ -#define DPLL_A_MD 0x0601c -/** Pipe B SDVO/UDI clock multiplier/divider register for G965. */ -#define DPLL_B_MD 0x06020 -/** +#define SDVO_MULTIPLIER_MASK 0x000000ff +#define SDVO_MULTIPLIER_SHIFT_HIRES 4 +#define SDVO_MULTIPLIER_SHIFT_VGA 0 +#define DPLL_A_MD 0x0601c /* 965+ only */ +/* * UDI pixel divider, controlling how many pixels are stuffed into a packet. * * Value is pixels minus 1. Must be set to 1 pixel for SDVO. */ -# define DPLL_MD_UDI_DIVIDER_MASK 0x3f000000 -# define DPLL_MD_UDI_DIVIDER_SHIFT 24 -/** UDI pixel divider for VGA, same as DPLL_MD_UDI_DIVIDER_MASK. */ -# define DPLL_MD_VGA_UDI_DIVIDER_MASK 0x003f0000 -# define DPLL_MD_VGA_UDI_DIVIDER_SHIFT 16 -/** +#define DPLL_MD_UDI_DIVIDER_MASK 0x3f000000 +#define DPLL_MD_UDI_DIVIDER_SHIFT 24 +/* UDI pixel divider for VGA, same as DPLL_MD_UDI_DIVIDER_MASK. */ +#define DPLL_MD_VGA_UDI_DIVIDER_MASK 0x003f0000 +#define DPLL_MD_VGA_UDI_DIVIDER_SHIFT 16 +/* * SDVO/UDI pixel multiplier. * * SDVO requires that the bus clock rate be between 1 and 2 Ghz, and the bus @@ -1160,80 +792,134 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); * This register field has values of multiplication factor minus 1, with * a maximum multiplier of 5 for SDVO. */ -# define DPLL_MD_UDI_MULTIPLIER_MASK 0x00003f00 -# define DPLL_MD_UDI_MULTIPLIER_SHIFT 8 -/** SDVO/UDI pixel multiplier for VGA, same as DPLL_MD_UDI_MULTIPLIER_MASK. +#define DPLL_MD_UDI_MULTIPLIER_MASK 0x00003f00 +#define DPLL_MD_UDI_MULTIPLIER_SHIFT 8 +/* + * SDVO/UDI pixel multiplier for VGA, same as DPLL_MD_UDI_MULTIPLIER_MASK. * This best be set to the default value (3) or the CRT won't work. No, * I don't entirely understand what this does... */ -# define DPLL_MD_VGA_UDI_MULTIPLIER_MASK 0x0000003f -# define DPLL_MD_VGA_UDI_MULTIPLIER_SHIFT 0 -/** @} */ - -#define DPLL_TEST 0x606c -# define DPLLB_TEST_SDVO_DIV_1 (0 << 22) -# define DPLLB_TEST_SDVO_DIV_2 (1 << 22) -# define DPLLB_TEST_SDVO_DIV_4 (2 << 22) -# define DPLLB_TEST_SDVO_DIV_MASK (3 << 22) -# define DPLLB_TEST_N_BYPASS (1 << 19) -# define DPLLB_TEST_M_BYPASS (1 << 18) -# define DPLLB_INPUT_BUFFER_ENABLE (1 << 16) -# define DPLLA_TEST_N_BYPASS (1 << 3) -# define DPLLA_TEST_M_BYPASS (1 << 2) -# define DPLLA_INPUT_BUFFER_ENABLE (1 << 0) +#define DPLL_MD_VGA_UDI_MULTIPLIER_MASK 0x0000003f +#define DPLL_MD_VGA_UDI_MULTIPLIER_SHIFT 0 +#define DPLL_B_MD 0x06020 /* 965+ only */ +#define FPA0 0x06040 +#define FPA1 0x06044 +#define FPB0 0x06048 +#define FPB1 0x0604c +#define FP_N_DIV_MASK 0x003f0000 +#define FP_N_DIV_SHIFT 16 +#define FP_M1_DIV_MASK 0x00003f00 +#define FP_M1_DIV_SHIFT 8 +#define FP_M2_DIV_MASK 0x0000003f +#define FP_M2_DIV_SHIFT 0 +#define DPLL_TEST 0x606c +#define DPLLB_TEST_SDVO_DIV_1 (0 << 22) +#define DPLLB_TEST_SDVO_DIV_2 (1 << 22) +#define DPLLB_TEST_SDVO_DIV_4 (2 << 22) +#define DPLLB_TEST_SDVO_DIV_MASK (3 << 22) +#define DPLLB_TEST_N_BYPASS (1 << 19) +#define DPLLB_TEST_M_BYPASS (1 << 18) +#define DPLLB_INPUT_BUFFER_ENABLE (1 << 16) +#define DPLLA_TEST_N_BYPASS (1 << 3) +#define DPLLA_TEST_M_BYPASS (1 << 2) +#define DPLLA_INPUT_BUFFER_ENABLE (1 << 0) +#define D_STATE 0x6104 +#define CG_2D_DIS 0x6200 +#define CG_3D_DIS 0x6204 -#define ADPA 0x61100 -#define ADPA_DAC_ENABLE (1<<31) -#define ADPA_DAC_DISABLE 0 -#define ADPA_PIPE_SELECT_MASK (1<<30) -#define ADPA_PIPE_A_SELECT 0 -#define ADPA_PIPE_B_SELECT (1<<30) -#define ADPA_USE_VGA_HVPOLARITY (1<<15) -#define ADPA_SETS_HVPOLARITY 0 -#define ADPA_VSYNC_CNTL_DISABLE (1<<11) -#define ADPA_VSYNC_CNTL_ENABLE 0 -#define ADPA_HSYNC_CNTL_DISABLE (1<<10) -#define ADPA_HSYNC_CNTL_ENABLE 0 -#define ADPA_VSYNC_ACTIVE_HIGH (1<<4) -#define ADPA_VSYNC_ACTIVE_LOW 0 -#define ADPA_HSYNC_ACTIVE_HIGH (1<<3) -#define ADPA_HSYNC_ACTIVE_LOW 0 - -#define FPA0 0x06040 -#define FPA1 0x06044 -#define FPB0 0x06048 -#define FPB1 0x0604c -# define FP_N_DIV_MASK 0x003f0000 -# define FP_N_DIV_SHIFT 16 -# define FP_M1_DIV_MASK 0x00003f00 -# define FP_M1_DIV_SHIFT 8 -# define FP_M2_DIV_MASK 0x0000003f -# define FP_M2_DIV_SHIFT 0 +/* + * Palette regs + */ + +#define PALETTE_A 0x0a000 +#define PALETTE_B 0x0a800 + +/* + * Overlay regs + */ + +#define OVADD 0x30000 +#define DOVSTA 0x30008 +#define OC_BUF (0x3<<20) +#define OGAMC5 0x30010 +#define OGAMC4 0x30014 +#define OGAMC3 0x30018 +#define OGAMC2 0x3001c +#define OGAMC1 0x30020 +#define OGAMC0 0x30024 + +/* + * Display engine regs + */ + +/* Pipe A timing regs */ +#define HTOTAL_A 0x60000 +#define HBLANK_A 0x60004 +#define HSYNC_A 0x60008 +#define VTOTAL_A 0x6000c +#define VBLANK_A 0x60010 +#define VSYNC_A 0x60014 +#define PIPEASRC 0x6001c +#define BCLRPAT_A 0x60020 +/* Pipe B timing regs */ +#define HTOTAL_B 0x61000 +#define HBLANK_B 0x61004 +#define HSYNC_B 0x61008 +#define VTOTAL_B 0x6100c +#define VBLANK_B 0x61010 +#define VSYNC_B 0x61014 +#define PIPEBSRC 0x6101c +#define BCLRPAT_B 0x61020 +/* VGA port control */ +#define ADPA 0x61100 +#define ADPA_DAC_ENABLE (1<<31) +#define ADPA_DAC_DISABLE 0 +#define ADPA_PIPE_SELECT_MASK (1<<30) +#define ADPA_PIPE_A_SELECT 0 +#define ADPA_PIPE_B_SELECT (1<<30) +#define ADPA_USE_VGA_HVPOLARITY (1<<15) +#define ADPA_SETS_HVPOLARITY 0 +#define ADPA_VSYNC_CNTL_DISABLE (1<<11) +#define ADPA_VSYNC_CNTL_ENABLE 0 +#define ADPA_HSYNC_CNTL_DISABLE (1<<10) +#define ADPA_HSYNC_CNTL_ENABLE 0 +#define ADPA_VSYNC_ACTIVE_HIGH (1<<4) +#define ADPA_VSYNC_ACTIVE_LOW 0 +#define ADPA_HSYNC_ACTIVE_HIGH (1<<3) +#define ADPA_HSYNC_ACTIVE_LOW 0 +#define ADPA_DPMS_MASK (~(3<<10)) +#define ADPA_DPMS_ON (0<<10) +#define ADPA_DPMS_SUSPEND (1<<10) +#define ADPA_DPMS_STANDBY (2<<10) +#define ADPA_DPMS_OFF (3<<10) + +/* Hotplug control (945+ only) */ #define PORT_HOTPLUG_EN 0x61110 -# define SDVOB_HOTPLUG_INT_EN (1 << 26) -# define SDVOC_HOTPLUG_INT_EN (1 << 25) -# define TV_HOTPLUG_INT_EN (1 << 18) -# define CRT_HOTPLUG_INT_EN (1 << 9) -# define CRT_HOTPLUG_FORCE_DETECT (1 << 3) +#define SDVOB_HOTPLUG_INT_EN (1 << 26) +#define SDVOC_HOTPLUG_INT_EN (1 << 25) +#define TV_HOTPLUG_INT_EN (1 << 18) +#define CRT_HOTPLUG_INT_EN (1 << 9) +#define CRT_HOTPLUG_FORCE_DETECT (1 << 3) #define PORT_HOTPLUG_STAT 0x61114 -# define CRT_HOTPLUG_INT_STATUS (1 << 11) -# define TV_HOTPLUG_INT_STATUS (1 << 10) -# define CRT_HOTPLUG_MONITOR_MASK (3 << 8) -# define CRT_HOTPLUG_MONITOR_COLOR (3 << 8) -# define CRT_HOTPLUG_MONITOR_MONO (2 << 8) -# define CRT_HOTPLUG_MONITOR_NONE (0 << 8) -# define SDVOC_HOTPLUG_INT_STATUS (1 << 7) -# define SDVOB_HOTPLUG_INT_STATUS (1 << 6) - +#define CRT_HOTPLUG_INT_STATUS (1 << 11) +#define TV_HOTPLUG_INT_STATUS (1 << 10) +#define CRT_HOTPLUG_MONITOR_MASK (3 << 8) +#define CRT_HOTPLUG_MONITOR_COLOR (3 << 8) +#define CRT_HOTPLUG_MONITOR_MONO (2 << 8) +#define CRT_HOTPLUG_MONITOR_NONE (0 << 8) +#define SDVOC_HOTPLUG_INT_STATUS (1 << 7) +#define SDVOB_HOTPLUG_INT_STATUS (1 << 6) + +/* SDVO port control */ #define SDVOB 0x61140 #define SDVOC 0x61160 -#define SDVO_ENABLE (1 << 31) -#define SDVO_PIPE_B_SELECT (1 << 30) -#define SDVO_STALL_SELECT (1 << 29) -#define SDVO_INTERRUPT_ENABLE (1 << 26) +#define SDVO_ENABLE (1 << 31) +#define SDVO_PIPE_B_SELECT (1 << 30) +#define SDVO_STALL_SELECT (1 << 29) +#define SDVO_INTERRUPT_ENABLE (1 << 26) /** * 915G/GM SDVO pixel multiplier. * @@ -1241,69 +927,156 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); * * \sa DPLL_MD_UDI_MULTIPLIER_MASK */ -#define SDVO_PORT_MULTIPLY_MASK (7 << 23) -#define SDVO_PORT_MULTIPLY_SHIFT 23 -#define SDVO_PHASE_SELECT_MASK (15 << 19) -#define SDVO_PHASE_SELECT_DEFAULT (6 << 19) -#define SDVO_CLOCK_OUTPUT_INVERT (1 << 18) -#define SDVOC_GANG_MODE (1 << 16) -#define SDVO_BORDER_ENABLE (1 << 7) -#define SDVOB_PCIE_CONCURRENCY (1 << 3) -#define SDVO_DETECTED (1 << 2) +#define SDVO_PORT_MULTIPLY_MASK (7 << 23) +#define SDVO_PORT_MULTIPLY_SHIFT 23 +#define SDVO_PHASE_SELECT_MASK (15 << 19) +#define SDVO_PHASE_SELECT_DEFAULT (6 << 19) +#define SDVO_CLOCK_OUTPUT_INVERT (1 << 18) +#define SDVOC_GANG_MODE (1 << 16) +#define SDVO_BORDER_ENABLE (1 << 7) +#define SDVOB_PCIE_CONCURRENCY (1 << 3) +#define SDVO_DETECTED (1 << 2) /* Bits to be preserved when writing */ -#define SDVOB_PRESERVE_MASK ((1 << 17) | (1 << 16) | (1 << 14) | (1 << 26)) -#define SDVOC_PRESERVE_MASK ((1 << 17) | (1 << 26)) +#define SDVOB_PRESERVE_MASK ((1 << 17) | (1 << 16) | (1 << 14) | (1 << 26)) +#define SDVOC_PRESERVE_MASK ((1 << 17) | (1 << 26)) -/** @defgroup LVDS - * @{ - */ -/** - * This register controls the LVDS output enable, pipe selection, and data - * format selection. - * - * All of the clock/data pairs are force powered down by power sequencing. - */ +/* DVO port control */ +#define DVOA 0x61120 +#define DVOB 0x61140 +#define DVOC 0x61160 +#define DVO_ENABLE (1 << 31) +#define DVO_PIPE_B_SELECT (1 << 30) +#define DVO_PIPE_STALL_UNUSED (0 << 28) +#define DVO_PIPE_STALL (1 << 28) +#define DVO_PIPE_STALL_TV (2 << 28) +#define DVO_PIPE_STALL_MASK (3 << 28) +#define DVO_USE_VGA_SYNC (1 << 15) +#define DVO_DATA_ORDER_I740 (0 << 14) +#define DVO_DATA_ORDER_FP (1 << 14) +#define DVO_VSYNC_DISABLE (1 << 11) +#define DVO_HSYNC_DISABLE (1 << 10) +#define DVO_VSYNC_TRISTATE (1 << 9) +#define DVO_HSYNC_TRISTATE (1 << 8) +#define DVO_BORDER_ENABLE (1 << 7) +#define DVO_DATA_ORDER_GBRG (1 << 6) +#define DVO_DATA_ORDER_RGGB (0 << 6) +#define DVO_DATA_ORDER_GBRG_ERRATA (0 << 6) +#define DVO_DATA_ORDER_RGGB_ERRATA (1 << 6) +#define DVO_VSYNC_ACTIVE_HIGH (1 << 4) +#define DVO_HSYNC_ACTIVE_HIGH (1 << 3) +#define DVO_BLANK_ACTIVE_HIGH (1 << 2) +#define DVO_OUTPUT_CSTATE_PIXELS (1 << 1) /* SDG only */ +#define DVO_OUTPUT_SOURCE_SIZE_PIXELS (1 << 0) /* SDG only */ +#define DVO_PRESERVE_MASK (0x7<<24) +#define DVOA_SRCDIM 0x61124 +#define DVOB_SRCDIM 0x61144 +#define DVOC_SRCDIM 0x61164 +#define DVO_SRCDIM_HORIZONTAL_SHIFT 12 +#define DVO_SRCDIM_VERTICAL_SHIFT 0 + +/* LVDS port control */ #define LVDS 0x61180 -/** +/* * Enables the LVDS port. This bit must be set before DPLLs are enabled, as * the DPLL semantics change when the LVDS is assigned to that pipe. */ -# define LVDS_PORT_EN (1 << 31) -/** Selects pipe B for LVDS data. Must be set on pre-965. */ -# define LVDS_PIPEB_SELECT (1 << 30) - -/** +#define LVDS_PORT_EN (1 << 31) +/* Selects pipe B for LVDS data. Must be set on pre-965. */ +#define LVDS_PIPEB_SELECT (1 << 30) +/* * Enables the A0-A2 data pairs and CLKA, containing 18 bits of color data per * pixel. */ -# define LVDS_A0A2_CLKA_POWER_MASK (3 << 8) -# define LVDS_A0A2_CLKA_POWER_DOWN (0 << 8) -# define LVDS_A0A2_CLKA_POWER_UP (3 << 8) -/** +#define LVDS_A0A2_CLKA_POWER_MASK (3 << 8) +#define LVDS_A0A2_CLKA_POWER_DOWN (0 << 8) +#define LVDS_A0A2_CLKA_POWER_UP (3 << 8) +/* * Controls the A3 data pair, which contains the additional LSBs for 24 bit * mode. Only enabled if LVDS_A0A2_CLKA_POWER_UP also indicates it should be * on. */ -# define LVDS_A3_POWER_MASK (3 << 6) -# define LVDS_A3_POWER_DOWN (0 << 6) -# define LVDS_A3_POWER_UP (3 << 6) -/** +#define LVDS_A3_POWER_MASK (3 << 6) +#define LVDS_A3_POWER_DOWN (0 << 6) +#define LVDS_A3_POWER_UP (3 << 6) +/* * Controls the CLKB pair. This should only be set when LVDS_B0B3_POWER_UP * is set. */ -# define LVDS_CLKB_POWER_MASK (3 << 4) -# define LVDS_CLKB_POWER_DOWN (0 << 4) -# define LVDS_CLKB_POWER_UP (3 << 4) - -/** +#define LVDS_CLKB_POWER_MASK (3 << 4) +#define LVDS_CLKB_POWER_DOWN (0 << 4) +#define LVDS_CLKB_POWER_UP (3 << 4) +/* * Controls the B0-B3 data pairs. This must be set to match the DPLL p2 * setting for whether we are in dual-channel mode. The B3 pair will * additionally only be powered up when LVDS_A3_POWER_UP is set. */ -# define LVDS_B0B3_POWER_MASK (3 << 2) -# define LVDS_B0B3_POWER_DOWN (0 << 2) -# define LVDS_B0B3_POWER_UP (3 << 2) +#define LVDS_B0B3_POWER_MASK (3 << 2) +#define LVDS_B0B3_POWER_DOWN (0 << 2) +#define LVDS_B0B3_POWER_UP (3 << 2) + +/* Panel power sequencing */ +#define PP_STATUS 0x61200 +#define PP_ON (1 << 31) +/* + * Indicates that all dependencies of the panel are on: + * + * - PLL enabled + * - pipe enabled + * - LVDS/DVOB/DVOC on + */ +#define PP_READY (1 << 30) +#define PP_SEQUENCE_NONE (0 << 28) +#define PP_SEQUENCE_ON (1 << 28) +#define PP_SEQUENCE_OFF (2 << 28) +#define PP_SEQUENCE_MASK 0x30000000 +#define PP_CONTROL 0x61204 +#define POWER_TARGET_ON (1 << 0) +#define PP_ON_DELAYS 0x61208 +#define PP_OFF_DELAYS 0x6120c +#define PP_DIVISOR 0x61210 + +/* Panel fitting */ +#define PFIT_CONTROL 0x61230 +#define PFIT_ENABLE (1 << 31) +#define PFIT_PIPE_MASK (3 << 29) +#define PFIT_PIPE_SHIFT 29 +#define VERT_INTERP_DISABLE (0 << 10) +#define VERT_INTERP_BILINEAR (1 << 10) +#define VERT_INTERP_MASK (3 << 10) +#define VERT_AUTO_SCALE (1 << 9) +#define HORIZ_INTERP_DISABLE (0 << 6) +#define HORIZ_INTERP_BILINEAR (1 << 6) +#define HORIZ_INTERP_MASK (3 << 6) +#define HORIZ_AUTO_SCALE (1 << 5) +#define PANEL_8TO6_DITHER_ENABLE (1 << 3) +#define PFIT_PGM_RATIOS 0x61234 +#define PFIT_VERT_SCALE_MASK 0xfff00000 +#define PFIT_HORIZ_SCALE_MASK 0x0000fff0 +#define PFIT_AUTO_RATIOS 0x61238 +/* Backlight control */ +#define BLC_PWM_CTL 0x61254 +#define BACKLIGHT_MODULATION_FREQ_SHIFT (17) +#define BLC_PWM_CTL2 0x61250 /* 965+ only */ +/* + * This is the most significant 15 bits of the number of backlight cycles in a + * complete cycle of the modulated backlight control. + * + * The actual value is this field multiplied by two. + */ +#define BACKLIGHT_MODULATION_FREQ_MASK (0x7fff << 17) +#define BLM_LEGACY_MODE (1 << 16) +/* + * This is the number of cycles out of the backlight modulation cycle for which + * the backlight is on. + * + * This field must be no greater than the number of cycles in the complete + * backlight modulation cycle. + */ +#define BACKLIGHT_DUTY_CYCLE_SHIFT (0) +#define BACKLIGHT_DUTY_CYCLE_MASK (0xffff) + +/* TV port control */ #define TV_CTL 0x68000 /** Enables the TV encoder */ # define TV_ENC_ENABLE (1 << 31) @@ -1370,11 +1143,7 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); */ # define TV_TEST_MODE_MONITOR_DETECT (7 << 0) # define TV_TEST_MODE_MASK (7 << 0) -/** @} */ -/** @defgroup TV_DAC - * @{ - */ #define TV_DAC 0x68004 /** * Reports that DAC state change logic has reported change (RO). @@ -1418,7 +1187,6 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); # define DAC_C_1_1_V (1 << 0) # define DAC_C_0_7_V (2 << 0) # define DAC_C_OFF (3 << 0) -/** @} */ /** * CSC coefficients are stored in a floating point format with 9 bits of @@ -1477,9 +1245,6 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); # define TV_AV_MASK 0x000007ff # define TV_AV_SHIFT 0 -/** @defgroup TV_CSC_KNOBS - * @{ - */ #define TV_CLR_KNOBS 0x68028 /** 2s-complement brightness adjustment */ # define TV_BRIGHTNESS_MASK 0xff000000 @@ -1493,11 +1258,7 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); /** Hue adjustment, as an integer phase angle in degrees */ # define TV_HUE_MASK 0x000000ff # define TV_HUE_SHIFT 0 -/** @} */ -/** @defgroup TV_CLR_LEVEL - * @{ - */ #define TV_CLR_LEVEL 0x6802c /** Controls the DAC level for black */ # define TV_BLACK_LEVEL_MASK 0x01ff0000 @@ -1505,11 +1266,7 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); /** Controls the DAC level for blanking */ # define TV_BLANK_LEVEL_MASK 0x000001ff # define TV_BLANK_LEVEL_SHIFT 0 -/* @} */ -/** @defgroup TV_H_CTL_1 - * @{ - */ #define TV_H_CTL_1 0x68030 /** Number of pixels in the hsync. */ # define TV_HSYNC_END_MASK 0x1fff0000 @@ -1517,11 +1274,7 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); /** Total number of pixels minus one in the line (display and blanking). */ # define TV_HTOTAL_MASK 0x00001fff # define TV_HTOTAL_SHIFT 0 -/** @} */ -/** @defgroup TV_H_CTL_2 - * @{ - */ #define TV_H_CTL_2 0x68034 /** Enables the colorburst (needed for non-component color) */ # define TV_BURST_ENA (1 << 31) @@ -1531,11 +1284,7 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); /** Length of the colorburst */ # define TV_HBURST_LEN_SHIFT 0 # define TV_HBURST_LEN_MASK 0x0001fff -/** @} */ -/** @defgroup TV_H_CTL_3 - * @{ - */ #define TV_H_CTL_3 0x68038 /** End of hblank, measured in pixels minus one from start of hsync */ # define TV_HBLANK_END_SHIFT 16 @@ -1543,11 +1292,7 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); /** Start of hblank, measured in pixels minus one from start of hsync */ # define TV_HBLANK_START_SHIFT 0 # define TV_HBLANK_START_MASK 0x0001fff -/** @} */ -/** @defgroup TV_V_CTL_1 - * @{ - */ #define TV_V_CTL_1 0x6803c /** XXX */ # define TV_NBR_END_SHIFT 16 @@ -1558,11 +1303,7 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); /** XXX */ # define TV_VI_END_F2_SHIFT 0 # define TV_VI_END_F2_MASK 0x0000003f -/** @} */ -/** @defgroup TV_V_CTL_2 - * @{ - */ #define TV_V_CTL_2 0x68040 /** Length of vsync, in half lines */ # define TV_VSYNC_LEN_MASK 0x07ff0000 @@ -1578,11 +1319,7 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); */ # define TV_VSYNC_START_F2_MASK 0x0000007f # define TV_VSYNC_START_F2_SHIFT 0 -/** @} */ -/** @defgroup TV_V_CTL_3 - * @{ - */ #define TV_V_CTL_3 0x68044 /** Enables generation of the equalization signal */ # define TV_EQUAL_ENA (1 << 31) @@ -1600,11 +1337,7 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); */ # define TV_VEQ_START_F2_MASK 0x000007f # define TV_VEQ_START_F2_SHIFT 0 -/** @} */ -/** @defgroup TV_V_CTL_4 - * @{ - */ #define TV_V_CTL_4 0x68048 /** * Offset to start of vertical colorburst, measured in one less than the @@ -1618,11 +1351,7 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); */ # define TV_VBURST_END_F1_MASK 0x000000ff # define TV_VBURST_END_F1_SHIFT 0 -/** @} */ -/** @defgroup TV_V_CTL_5 - * @{ - */ #define TV_V_CTL_5 0x6804c /** * Offset to start of vertical colorburst, measured in one less than the @@ -1636,11 +1365,7 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); */ # define TV_VBURST_END_F2_MASK 0x000000ff # define TV_VBURST_END_F2_SHIFT 0 -/** @} */ -/** @defgroup TV_V_CTL_6 - * @{ - */ #define TV_V_CTL_6 0x68050 /** * Offset to start of vertical colorburst, measured in one less than the @@ -1654,11 +1379,7 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); */ # define TV_VBURST_END_F3_MASK 0x000000ff # define TV_VBURST_END_F3_SHIFT 0 -/** @} */ -/** @defgroup TV_V_CTL_7 - * @{ - */ #define TV_V_CTL_7 0x68054 /** * Offset to start of vertical colorburst, measured in one less than the @@ -1672,11 +1393,7 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); */ # define TV_VBURST_END_F4_MASK 0x000000ff # define TV_VBURST_END_F4_SHIFT 0 -/** @} */ -/** @defgroup TV_SC_CTL_1 - * @{ - */ #define TV_SC_CTL_1 0x68060 /** Turns on the first subcarrier phase generation DDA */ # define TV_SC_DDA1_EN (1 << 31) @@ -1698,11 +1415,7 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); /** Sets the increment of the first subcarrier phase generation DDA */ # define TV_SCDDA1_INC_MASK 0x00000fff # define TV_SCDDA1_INC_SHIFT 0 -/** @} */ -/** @defgroup TV_SC_CTL_2 - * @{ - */ #define TV_SC_CTL_2 0x68064 /** Sets the rollover for the second subcarrier phase generation DDA */ # define TV_SCDDA2_SIZE_MASK 0x7fff0000 @@ -1710,11 +1423,7 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); /** Sets the increent of the second subcarrier phase generation DDA */ # define TV_SCDDA2_INC_MASK 0x00007fff # define TV_SCDDA2_INC_SHIFT 0 -/** @} */ -/** @defgroup TV_SC_CTL_3 - * @{ - */ #define TV_SC_CTL_3 0x68068 /** Sets the rollover for the third subcarrier phase generation DDA */ # define TV_SCDDA3_SIZE_MASK 0x7fff0000 @@ -1722,11 +1431,7 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); /** Sets the increent of the third subcarrier phase generation DDA */ # define TV_SCDDA3_INC_MASK 0x00007fff # define TV_SCDDA3_INC_SHIFT 0 -/** @} */ -/** @defgroup TV_WIN_POS - * @{ - */ #define TV_WIN_POS 0x68070 /** X coordinate of the display from the start of horizontal active */ # define TV_XPOS_MASK 0x1fff0000 @@ -1734,11 +1439,7 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); /** Y coordinate of the display from the start of vertical active (NBR) */ # define TV_YPOS_MASK 0x00000fff # define TV_YPOS_SHIFT 0 -/** @} */ -/** @defgroup TV_WIN_SIZE - * @{ - */ #define TV_WIN_SIZE 0x68074 /** Horizontal size of the display window, measured in pixels*/ # define TV_XSIZE_MASK 0x1fff0000 @@ -1750,11 +1451,7 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); */ # define TV_YSIZE_MASK 0x00000fff # define TV_YSIZE_SHIFT 0 -/** @} */ -/** @defgroup TV_FILTER_CTL_1 - * @{ - */ #define TV_FILTER_CTL_1 0x68080 /** * Enables automatic scaling calculation. @@ -1787,11 +1484,7 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); */ # define TV_HSCALE_FRAC_MASK 0x00003fff # define TV_HSCALE_FRAC_SHIFT 0 -/** @} */ -/** @defgroup TV_FILTER_CTL_2 - * @{ - */ #define TV_FILTER_CTL_2 0x68084 /** * Sets the integer part of the 3.15 fixed-point vertical scaling factor. @@ -1807,11 +1500,7 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); */ # define TV_VSCALE_FRAC_MASK 0x00007fff # define TV_VSCALE_FRAC_SHIFT 0 -/** @} */ -/** @defgroup TV_FILTER_CTL_3 - * @{ - */ #define TV_FILTER_CTL_3 0x68088 /** * Sets the integer part of the 3.15 fixed-point vertical scaling factor. @@ -1831,11 +1520,7 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); */ # define TV_VSCALE_IP_FRAC_MASK 0x00007fff # define TV_VSCALE_IP_FRAC_SHIFT 0 -/** @} */ -/** @defgroup TV_CC_CONTROL - * @{ - */ #define TV_CC_CONTROL 0x68090 # define TV_CC_ENABLE (1 << 31) /** @@ -1851,11 +1536,7 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); /** Sets the vertical position of the CC data. Usually 21 */ # define TV_CC_LINE_MASK 0x0000003f # define TV_CC_LINE_SHIFT 0 -/** @} */ -/** @defgroup TV_CC_DATA - * @{ - */ #define TV_CC_DATA 0x68094 # define TV_CC_RDY (1 << 31) /** Second word of CC data to be transmitted. */ @@ -1864,10 +1545,7 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); /** First word of CC data to be transmitted. */ # define TV_CC_DATA_1_MASK 0x0000007f # define TV_CC_DATA_1_SHIFT 0 -/** @} - */ -/** @{ */ #define TV_H_LUMA_0 0x68100 #define TV_H_LUMA_59 0x681ec #define TV_H_CHROMA_0 0x68200 @@ -1877,102 +1555,131 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); #define TV_V_CHROMA_0 0x68400 #define TV_V_CHROMA_42 0x684a8 -#define PIPEACONF 0x70008 -#define PIPEACONF_ENABLE (1<<31) -#define PIPEACONF_DISABLE 0 -#define PIPEACONF_DOUBLE_WIDE (1<<30) -#define I965_PIPECONF_ACTIVE (1<<30) -#define PIPEACONF_SINGLE_WIDE 0 -#define PIPEACONF_PIPE_UNLOCKED 0 -#define PIPEACONF_PIPE_LOCKED (1<<25) -#define PIPEACONF_PALETTE 0 -#define PIPEACONF_GAMMA (1<<24) -#define PIPECONF_FORCE_BORDER (1<<25) -#define PIPECONF_PROGRESSIVE (0 << 21) -#define PIPECONF_INTERLACE_W_FIELD_INDICATION (6 << 21) -#define PIPECONF_INTERLACE_FIELD_0_ONLY (7 << 21) - -#define DSPARB 0x70030 -#define DSPARB_CSTART_MASK (0x7f << 7) -#define DSPARB_CSTART_SHIFT 7 -#define DSPARB_BSTART_MASK (0x7f) -#define DSPARB_BSTART_SHIFT 0 - -#define PIPEBCONF 0x71008 -#define PIPEBCONF_ENABLE (1<<31) -#define PIPEBCONF_DISABLE 0 -#define PIPEBCONF_DOUBLE_WIDE (1<<30) -#define PIPEBCONF_DISABLE 0 -#define PIPEBCONF_GAMMA (1<<24) -#define PIPEBCONF_PALETTE 0 - -#define PIPEBGCMAXRED 0x71010 -#define PIPEBGCMAXGREEN 0x71014 -#define PIPEBGCMAXBLUE 0x71018 -#define PIPEBSTAT 0x71024 -#define PIPEBFRAMEHIGH 0x71040 -#define PIPEBFRAMEPIXEL 0x71044 +/* Display & cursor control */ -#define DSPACNTR 0x70180 -#define DSPBCNTR 0x71180 -#define DISPLAY_PLANE_ENABLE (1<<31) -#define DISPLAY_PLANE_DISABLE 0 -#define DISPPLANE_GAMMA_ENABLE (1<<30) -#define DISPPLANE_GAMMA_DISABLE 0 -#define DISPPLANE_PIXFORMAT_MASK (0xf<<26) -#define DISPPLANE_8BPP (0x2<<26) -#define DISPPLANE_15_16BPP (0x4<<26) -#define DISPPLANE_16BPP (0x5<<26) -#define DISPPLANE_32BPP_NO_ALPHA (0x6<<26) -#define DISPPLANE_32BPP (0x7<<26) -#define DISPPLANE_STEREO_ENABLE (1<<25) -#define DISPPLANE_STEREO_DISABLE 0 -#define DISPPLANE_SEL_PIPE_MASK (1<<24) -#define DISPPLANE_SEL_PIPE_A 0 -#define DISPPLANE_SEL_PIPE_B (1<<24) -#define DISPPLANE_SRC_KEY_ENABLE (1<<22) -#define DISPPLANE_SRC_KEY_DISABLE 0 -#define DISPPLANE_LINE_DOUBLE (1<<20) -#define DISPPLANE_NO_LINE_DOUBLE 0 -#define DISPPLANE_STEREO_POLARITY_FIRST 0 -#define DISPPLANE_STEREO_POLARITY_SECOND (1<<18) -/* plane B only */ -#define DISPPLANE_ALPHA_TRANS_ENABLE (1<<15) -#define DISPPLANE_ALPHA_TRANS_DISABLE 0 -#define DISPPLANE_SPRITE_ABOVE_DISPLAYA 0 -#define DISPPLANE_SPRITE_ABOVE_OVERLAY (1) - -#define DSPABASE 0x70184 +/* Pipe A */ +#define PIPEADSL 0x70000 +#define PIPEACONF 0x70008 +#define PIPEACONF_ENABLE (1<<31) +#define PIPEACONF_DISABLE 0 +#define PIPEACONF_DOUBLE_WIDE (1<<30) +#define I965_PIPECONF_ACTIVE (1<<30) +#define PIPEACONF_SINGLE_WIDE 0 +#define PIPEACONF_PIPE_UNLOCKED 0 +#define PIPEACONF_PIPE_LOCKED (1<<25) +#define PIPEACONF_PALETTE 0 +#define PIPEACONF_GAMMA (1<<24) +#define PIPECONF_FORCE_BORDER (1<<25) +#define PIPECONF_PROGRESSIVE (0 << 21) +#define PIPECONF_INTERLACE_W_FIELD_INDICATION (6 << 21) +#define PIPECONF_INTERLACE_FIELD_0_ONLY (7 << 21) +#define PIPEASTAT 0x70024 +#define PIPE_FIFO_UNDERRUN_STATUS (1UL<<31) +#define PIPE_CRC_ERROR_ENABLE (1UL<<29) +#define PIPE_CRC_DONE_ENABLE (1UL<<28) +#define PIPE_GMBUS_EVENT_ENABLE (1UL<<27) +#define PIPE_HOTPLUG_INTERRUPT_ENABLE (1UL<<26) +#define PIPE_VSYNC_INTERRUPT_ENABLE (1UL<<25) +#define PIPE_DISPLAY_LINE_COMPARE_ENABLE (1UL<<24) +#define PIPE_DPST_EVENT_ENABLE (1UL<<23) +#define PIPE_LEGACY_BLC_EVENT_ENABLE (1UL<<22) +#define PIPE_ODD_FIELD_INTERRUPT_ENABLE (1UL<<21) +#define PIPE_EVEN_FIELD_INTERRUPT_ENABLE (1UL<<20) +#define PIPE_HOTPLUG_TV_INTERRUPT_ENABLE (1UL<<18) /* pre-965 */ +#define PIPE_START_VBLANK_INTERRUPT_ENABLE (1UL<<18) /* 965 or later */ +#define PIPE_VBLANK_INTERRUPT_ENABLE (1UL<<17) +#define PIPE_OVERLAY_UPDATED_ENABLE (1UL<<16) +#define PIPE_CRC_ERROR_INTERRUPT_STATUS (1UL<<13) +#define PIPE_CRC_DONE_INTERRUPT_STATUS (1UL<<12) +#define PIPE_GMBUS_INTERRUPT_STATUS (1UL<<11) +#define PIPE_HOTPLUG_INTERRUPT_STATUS (1UL<<10) +#define PIPE_VSYNC_INTERRUPT_STATUS (1UL<<9) +#define PIPE_DISPLAY_LINE_COMPARE_STATUS (1UL<<8) +#define PIPE_DPST_EVENT_STATUS (1UL<<7) +#define PIPE_LEGACY_BLC_EVENT_STATUS (1UL<<6) +#define PIPE_ODD_FIELD_INTERRUPT_STATUS (1UL<<5) +#define PIPE_EVEN_FIELD_INTERRUPT_STATUS (1UL<<4) +#define PIPE_HOTPLUG_TV_INTERRUPT_STATUS (1UL<<2) /* pre-965 */ +#define PIPE_START_VBLANK_INTERRUPT_STATUS (1UL<<2) /* 965 or later */ +#define PIPE_VBLANK_INTERRUPT_STATUS (1UL<<1) +#define PIPE_OVERLAY_UPDATED_STATUS (1UL<<0) + +#define DSPARB 0x70030 +#define DSPARB_CSTART_MASK (0x7f << 7) +#define DSPARB_CSTART_SHIFT 7 +#define DSPARB_BSTART_MASK (0x7f) +#define DSPARB_BSTART_SHIFT 0 +/* + * The two pipe frame counter registers are not synchronized, so + * reading a stable value is somewhat tricky. The following code + * should work: + * + * do { + * high1 = ((INREG(PIPEAFRAMEHIGH) & PIPE_FRAME_HIGH_MASK) >> + * PIPE_FRAME_HIGH_SHIFT; + * low1 = ((INREG(PIPEAFRAMEPIXEL) & PIPE_FRAME_LOW_MASK) >> + * PIPE_FRAME_LOW_SHIFT); + * high2 = ((INREG(PIPEAFRAMEHIGH) & PIPE_FRAME_HIGH_MASK) >> + * PIPE_FRAME_HIGH_SHIFT); + * } while (high1 != high2); + * frame = (high1 << 8) | low1; + */ +#define PIPEAFRAMEHIGH 0x70040 +#define PIPE_FRAME_HIGH_MASK 0x0000ffff +#define PIPE_FRAME_HIGH_SHIFT 0 +#define PIPEAFRAMEPIXEL 0x70044 +#define PIPE_FRAME_LOW_MASK 0xff000000 +#define PIPE_FRAME_LOW_SHIFT 24 +#define PIPE_PIXEL_MASK 0x00ffffff +#define PIPE_PIXEL_SHIFT 0 + +/* Cursor A & B regs */ +#define CURACNTR 0x70080 +#define CURSOR_MODE_DISABLE 0x00 +#define CURSOR_MODE_64_32B_AX 0x07 +#define CURSOR_MODE_64_ARGB_AX ((1 << 5) | CURSOR_MODE_64_32B_AX) +#define MCURSOR_GAMMA_ENABLE (1 << 26) +#define CURABASE 0x70084 +#define CURAPOS 0x70088 +#define CURSOR_POS_MASK 0x007FF +#define CURSOR_POS_SIGN 0x8000 +#define CURSOR_X_SHIFT 0 +#define CURSOR_Y_SHIFT 16 +#define CURBCNTR 0x700c0 +#define CURBBASE 0x700c4 +#define CURBPOS 0x700c8 + +/* Display A control */ +#define DSPACNTR 0x70180 +#define DISPLAY_PLANE_ENABLE (1<<31) +#define DISPLAY_PLANE_DISABLE 0 +#define DISPPLANE_GAMMA_ENABLE (1<<30) +#define DISPPLANE_GAMMA_DISABLE 0 +#define DISPPLANE_PIXFORMAT_MASK (0xf<<26) +#define DISPPLANE_8BPP (0x2<<26) +#define DISPPLANE_15_16BPP (0x4<<26) +#define DISPPLANE_16BPP (0x5<<26) +#define DISPPLANE_32BPP_NO_ALPHA (0x6<<26) +#define DISPPLANE_32BPP (0x7<<26) +#define DISPPLANE_STEREO_ENABLE (1<<25) +#define DISPPLANE_STEREO_DISABLE 0 +#define DISPPLANE_SEL_PIPE_MASK (1<<24) +#define DISPPLANE_SEL_PIPE_A 0 +#define DISPPLANE_SEL_PIPE_B (1<<24) +#define DISPPLANE_SRC_KEY_ENABLE (1<<22) +#define DISPPLANE_SRC_KEY_DISABLE 0 +#define DISPPLANE_LINE_DOUBLE (1<<20) +#define DISPPLANE_NO_LINE_DOUBLE 0 +#define DISPPLANE_STEREO_POLARITY_FIRST 0 +#define DISPPLANE_STEREO_POLARITY_SECOND (1<<18) +#define DSPAADDR 0x70184 #define DSPASTRIDE 0x70188 - -#define DSPBBASE 0x71184 -#define DSPBADDR DSPBBASE -#define DSPBSTRIDE 0x71188 - -#define DSPAKEYVAL 0x70194 -#define DSPAKEYMASK 0x70198 - #define DSPAPOS 0x7018C /* reserved */ #define DSPASIZE 0x70190 -#define DSPBPOS 0x7118C -#define DSPBSIZE 0x71190 - -#define DSPASURF 0x7019C -#define DSPATILEOFF 0x701A4 - -#define DSPBSURF 0x7119C -#define DSPBTILEOFF 0x711A4 - -#define VGACNTRL 0x71400 -# define VGA_DISP_DISABLE (1 << 31) -# define VGA_2X_MODE (1 << 30) -# define VGA_PIPE_B_SELECT (1 << 29) - -/* - * Some BIOS scratch area registers. The 845 (and 830?) store the amount - * of video memory available to the BIOS in SWF1. - */ +#define DSPASURF 0x7019C /* 965+ only */ +#define DSPATILEOFF 0x701A4 /* 965+ only */ +/* VBIOS flags */ #define SWF0 0x71410 #define SWF1 0x71414 #define SWF2 0x71418 @@ -1986,27 +1693,33 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); #define SWF31 0x72418 #define SWF32 0x7241c -/* - * Overlay registers. These are overlay registers accessed via MMIO. - * Those loaded via the overlay register page are defined in i830_video.c. - */ -#define OVADD 0x30000 +/* Pipe B */ +#define PIPEBDSL 0x71000 +#define PIPEBCONF 0x71008 +#define PIPEBSTAT 0x71024 +#define PIPEBFRAMEHIGH 0x71040 +#define PIPEBFRAMEPIXEL 0x71044 -#define DOVSTA 0x30008 -#define OC_BUF (0x3<<20) +/* Display B control */ +#define DSPBCNTR 0x71180 +#define DISPPLANE_ALPHA_TRANS_ENABLE (1<<15) +#define DISPPLANE_ALPHA_TRANS_DISABLE 0 +#define DISPPLANE_SPRITE_ABOVE_DISPLAY 0 +#define DISPPLANE_SPRITE_ABOVE_OVERLAY (1) +#define DSPBADDR 0x71184 +#define DSPBSTRIDE 0x71188 +#define DSPBPOS 0x7118C +#define DSPBSIZE 0x71190 +#define DSPBSURF 0x7119C +#define DSPBTILEOFF 0x711A4 -#define OGAMC5 0x30010 -#define OGAMC4 0x30014 -#define OGAMC3 0x30018 -#define OGAMC2 0x3001c -#define OGAMC1 0x30020 -#define OGAMC0 0x30024 +/* VBIOS regs */ +#define VGACNTRL 0x71400 +# define VGA_DISP_DISABLE (1 << 31) +# define VGA_2X_MODE (1 << 30) +# define VGA_PIPE_B_SELECT (1 << 29) -/* - * Palette registers - */ -#define PALETTE_A 0x0a000 -#define PALETTE_B 0x0a800 +/* Chipset type macros */ #define IS_I830(dev) ((dev)->pci_device == 0x3577) #define IS_845G(dev) ((dev)->pci_device == 0x2562) @@ -2043,6 +1756,4 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); #define I915_NEED_GFX_HWS(dev) (IS_G33(dev) || IS_IGD_GM(dev)) -#define PRIMARY_RINGBUFFER_SIZE (128*1024) - #endif diff --git a/shared-core/i915_init.c b/shared-core/i915_init.c index c0ca226a..98908a50 100644 --- a/shared-core/i915_init.c +++ b/shared-core/i915_init.c @@ -112,9 +112,9 @@ int i915_load_modeset_init(struct drm_device *dev) drm_bo_init_mm(dev, DRM_BO_MEM_VRAM, 0, prealloc_size >> PAGE_SHIFT, 1); drm_bo_init_mm(dev, DRM_BO_MEM_TT, prealloc_size >> PAGE_SHIFT, (agp_size - prealloc_size) >> PAGE_SHIFT, 1); - I915_WRITE(LP_RING + RING_LEN, 0); - I915_WRITE(LP_RING + RING_HEAD, 0); - I915_WRITE(LP_RING + RING_TAIL, 0); + I915_WRITE(PRB0_CTL, 0); + I915_WRITE(PRB0_HEAD, 0); + I915_WRITE(PRB0_TAIL, 0); size = PRIMARY_RINGBUFFER_SIZE; ret = drm_buffer_object_create(dev, size, drm_bo_type_kernel, @@ -146,10 +146,9 @@ int i915_load_modeset_init(struct drm_device *dev) dev_priv->ring.virtual_start, dev_priv->ring.Size); memset((void *)(dev_priv->ring.virtual_start), 0, dev_priv->ring.Size); - I915_WRITE(LP_RING + RING_START, dev_priv->ring.Start); - I915_WRITE(LP_RING + RING_LEN, - ((dev_priv->ring.Size - 4096) & RING_NR_PAGES) | - (RING_NO_REPORT | RING_VALID)); + I915_WRITE(PRB0_START, dev_priv->ring.Start); + I915_WRITE(PRB0_CTL, ((dev_priv->ring.Size - 4096) & RING_NR_PAGES) | + (RING_NO_REPORT | RING_VALID)); /* We are using separate values as placeholders for mechanisms for * private backbuffer/depthbuffer usage. @@ -179,7 +178,7 @@ int i915_load_modeset_init(struct drm_device *dev) memset(dev_priv->hw_status_page, 0, PAGE_SIZE); - I915_WRITE(I915REG_HWS_PGA, dev_priv->dma_status_page); + I915_WRITE(HWS_PGA, dev_priv->dma_status_page); } else { size = 4 * 1024; ret = drm_buffer_object_create(dev, size, @@ -214,7 +213,7 @@ int i915_load_modeset_init(struct drm_device *dev) } dev_priv->hw_status_page = dev_priv->hws_map.handle; memset(dev_priv->hw_status_page, 0, PAGE_SIZE); - I915_WRITE(I915REG_HWS_PGA, dev_priv->status_gfx_addr); + I915_WRITE(HWS_PGA, dev_priv->status_gfx_addr); } DRM_DEBUG("Enabled hardware status page\n"); @@ -265,7 +264,7 @@ destroy_hws: if (dev_priv->hws_bo) drm_bo_usage_deref_unlocked(&dev_priv->hws_bo); } - I915_WRITE(I915REG_HWS_PGA, 0x1ffff000); + I915_WRITE(HWS_PGA, 0x1ffff000); destroy_ringbuffer: if (dev_priv->ring.virtual_start) drm_mem_reg_iounmap(dev, &dev_priv->ring_buffer->mem, @@ -385,7 +384,7 @@ int i915_driver_unload(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; - I915_WRITE(LP_RING + RING_LEN, 0); + I915_WRITE(PRB0_CTL, 0); if (drm_core_check_feature(dev, DRIVER_MODESET)) { drm_irq_uninstall(dev); @@ -417,14 +416,14 @@ int i915_driver_unload(struct drm_device *dev) dev_priv->hw_status_page = NULL; dev_priv->dma_status_page = 0; /* Need to rewrite hardware status page */ - I915_WRITE(I915REG_HWS_PGA, 0x1ffff000); + I915_WRITE(HWS_PGA, 0x1ffff000); } if (dev_priv->status_gfx_addr) { dev_priv->status_gfx_addr = 0; drm_core_ioremapfree(&dev_priv->hws_map, dev); drm_bo_usage_deref_unlocked(&dev_priv->hws_bo); - I915_WRITE(I915REG_HWS_PGA, 0x1ffff000); + I915_WRITE(HWS_PGA, 0x1ffff000); } if (drm_core_check_feature(dev, DRIVER_MODESET)) { diff --git a/shared-core/i915_irq.c b/shared-core/i915_irq.c index 4aef568e..38995421 100644 --- a/shared-core/i915_irq.c +++ b/shared-core/i915_irq.c @@ -636,9 +636,9 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) /* On i8xx/i915 hw the IIR and IER are 16bit on i9xx its 32bit */ if (IS_I9XX(dev) && !IS_I915G(dev) && !IS_I915GM(dev)) - iir = I915_READ(I915REG_INT_IDENTITY_R); + iir = I915_READ(IIR); else - iir = I915_READ16(I915REG_INT_IDENTITY_R); + iir = I915_READ16(IIR); iir &= (dev_priv->irq_enable_reg | I915_USER_INTERRUPT); @@ -649,10 +649,10 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) #if 0 DRM_DEBUG ("iir 0x%08x im 0x%08x ie 0x%08x pipea 0x%08x pipeb 0x%08x\n", iir, - I915_READ(I915REG_INT_MASK_R), - I915_READ(I915REG_INT_ENABLE_R), - I915_READ(I915REG_PIPEASTAT), - I915_READ(I915REG_PIPEBSTAT)); + I915_READ(IMR), + I915_READ(IER), + I915_READ(PIPEASTAT), + I915_READ(PIPEBSTAT)); #endif return IRQ_NONE; } @@ -662,19 +662,19 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) * we may get extra interrupts. */ if (iir & I915_DISPLAY_PIPE_A_EVENT_INTERRUPT) { - pipea_stats = I915_READ(I915REG_PIPEASTAT); - if (pipea_stats & (I915_START_VBLANK_INTERRUPT_STATUS| - I915_VBLANK_INTERRUPT_STATUS)) + pipea_stats = I915_READ(PIPEASTAT); + if (pipea_stats & (PIPE_START_VBLANK_INTERRUPT_STATUS| + PIPE_VBLANK_INTERRUPT_STATUS)) { vblank++; drm_handle_vblank(dev, i915_get_plane(dev, 0)); } /* This is a global event, and not a pipe A event */ - if (pipea_stats & I915_HOTPLUG_INTERRUPT_STATUS) + if (pipea_stats & PIPE_HOTPLUG_INTERRUPT_STATUS) hotplug = 1; - if (pipea_stats & I915_HOTPLUG_TV_INTERRUPT_STATUS) { + if (pipea_stats & PIPE_HOTPLUG_TV_INTERRUPT_STATUS) { hotplug = 1; /* Toggle hotplug detection to clear hotplug status */ tvdac = I915_READ(TV_DAC); @@ -682,27 +682,27 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) I915_WRITE(TV_DAC, tvdac | TVDAC_STATE_CHG_EN); } - I915_WRITE(I915REG_PIPEASTAT, pipea_stats); + I915_WRITE(PIPEASTAT, pipea_stats); } if (iir & I915_DISPLAY_PIPE_B_EVENT_INTERRUPT) { - pipeb_stats = I915_READ(I915REG_PIPEBSTAT); - if (pipeb_stats & (I915_START_VBLANK_INTERRUPT_STATUS| - I915_VBLANK_INTERRUPT_STATUS)) + pipeb_stats = I915_READ(PIPEBSTAT); + if (pipeb_stats & (PIPE_START_VBLANK_INTERRUPT_STATUS| + PIPE_VBLANK_INTERRUPT_STATUS)) { vblank++; drm_handle_vblank(dev, i915_get_plane(dev, 1)); } - I915_WRITE(I915REG_PIPEBSTAT, pipeb_stats); + I915_WRITE(PIPEBSTAT, pipeb_stats); } /* Clear the generated interrupt */ if (IS_I9XX(dev) && !IS_I915G(dev) && !IS_I915GM(dev)) { - I915_WRITE(I915REG_INT_IDENTITY_R, iir); - (void) I915_READ(I915REG_INT_IDENTITY_R); + I915_WRITE(IIR, iir); + (void) I915_READ(IIR); } else { - I915_WRITE16(I915REG_INT_IDENTITY_R, iir); - (void) I915_READ16(I915REG_INT_IDENTITY_R); + I915_WRITE16(IIR, iir); + (void) I915_READ16(IIR); } if (dev->primary->master) { @@ -728,10 +728,10 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) DRM_INFO("Hotplug event received\n"); if (!IS_I9XX(dev) || IS_I915G(dev) || IS_I915GM(dev)) { - if (pipea_stats & I915_HOTPLUG_INTERRUPT_STATUS) + if (pipea_stats & PIPE_HOTPLUG_INTERRUPT_STATUS) temp2 |= SDVOB_HOTPLUG_INT_STATUS | SDVOC_HOTPLUG_INT_STATUS; - if (pipea_stats & I915_HOTPLUG_TV_INTERRUPT_STATUS) + if (pipea_stats & PIPE_HOTPLUG_TV_INTERRUPT_STATUS) temp2 |= TV_HOTPLUG_INT_STATUS; } else { temp2 = I915_READ(PORT_HOTPLUG_STAT); @@ -757,7 +757,7 @@ int i915_emit_irq(struct drm_device *dev) BEGIN_LP_RING(2); OUT_RING(0); - OUT_RING(GFX_OP_USER_INTERRUPT); + OUT_RING(MI_USER_INTERRUPT); ADVANCE_LP_RING(); return dev_priv->counter; @@ -771,9 +771,9 @@ void i915_user_irq_on(struct drm_device *dev) if (dev_priv->irq_enabled && (++dev_priv->user_irq_refcount == 1)){ dev_priv->irq_enable_reg |= I915_USER_INTERRUPT; if (IS_I9XX(dev) && !IS_I915G(dev) && !IS_I915GM(dev)) - I915_WRITE(I915REG_INT_ENABLE_R, dev_priv->irq_enable_reg); + I915_WRITE(IER, dev_priv->irq_enable_reg); else - I915_WRITE16(I915REG_INT_ENABLE_R, dev_priv->irq_enable_reg); + I915_WRITE16(IER, dev_priv->irq_enable_reg); } DRM_SPINUNLOCK(&dev_priv->user_irq_lock); @@ -787,9 +787,9 @@ void i915_user_irq_off(struct drm_device *dev) if (dev_priv->irq_enabled && (--dev_priv->user_irq_refcount == 0)) { // dev_priv->irq_enable_reg &= ~I915_USER_INTERRUPT; // if (IS_I9XX(dev) && !IS_I915G(dev) && !IS_I915GM(dev)) - // I915_WRITE(I915REG_INT_ENABLE_R, dev_priv->irq_enable_reg); + // I915_WRITE(IER, dev_priv->irq_enable_reg); // else - // I915_WRITE16(I915REG_INT_ENABLE_R, dev_priv->irq_enable_reg); + // I915_WRITE16(IER, dev_priv->irq_enable_reg); } DRM_SPINUNLOCK(&dev_priv->user_irq_lock); } @@ -876,11 +876,11 @@ int i915_enable_vblank(struct drm_device *dev, int plane) switch (pipe) { case 0: - pipestat_reg = I915REG_PIPEASTAT; + pipestat_reg = PIPEASTAT; dev_priv->irq_enable_reg |= I915_DISPLAY_PIPE_A_EVENT_INTERRUPT; break; case 1: - pipestat_reg = I915REG_PIPEBSTAT; + pipestat_reg = PIPEBSTAT; dev_priv->irq_enable_reg |= I915_DISPLAY_PIPE_B_EVENT_INTERRUPT; break; default: @@ -897,21 +897,21 @@ int i915_enable_vblank(struct drm_device *dev, int plane) * but */ if (IS_I965G (dev)) - pipestat |= I915_START_VBLANK_INTERRUPT_ENABLE; + pipestat |= PIPE_START_VBLANK_INTERRUPT_ENABLE; else - pipestat |= I915_VBLANK_INTERRUPT_ENABLE; + pipestat |= PIPE_VBLANK_INTERRUPT_ENABLE; /* * Clear any pending status */ - pipestat |= (I915_START_VBLANK_INTERRUPT_STATUS | - I915_VBLANK_INTERRUPT_STATUS); + pipestat |= (PIPE_START_VBLANK_INTERRUPT_STATUS | + PIPE_VBLANK_INTERRUPT_STATUS); I915_WRITE(pipestat_reg, pipestat); } if (IS_I9XX(dev) && !IS_I915G(dev) && !IS_I915GM(dev)) - I915_WRITE(I915REG_INT_ENABLE_R, dev_priv->irq_enable_reg); + I915_WRITE(IER, dev_priv->irq_enable_reg); else - I915_WRITE16(I915REG_INT_ENABLE_R, dev_priv->irq_enable_reg); + I915_WRITE16(IER, dev_priv->irq_enable_reg); return 0; @@ -926,11 +926,11 @@ void i915_disable_vblank(struct drm_device *dev, int plane) switch (pipe) { case 0: - pipestat_reg = I915REG_PIPEASTAT; + pipestat_reg = PIPEASTAT; dev_priv->irq_enable_reg &= ~I915_DISPLAY_PIPE_A_EVENT_INTERRUPT; break; case 1: - pipestat_reg = I915REG_PIPEBSTAT; + pipestat_reg = PIPEBSTAT; dev_priv->irq_enable_reg &= ~I915_DISPLAY_PIPE_B_EVENT_INTERRUPT; break; default: @@ -940,20 +940,20 @@ void i915_disable_vblank(struct drm_device *dev, int plane) } if (IS_I9XX(dev) && !IS_I915G(dev) && !IS_I915GM(dev)) - I915_WRITE(I915REG_INT_ENABLE_R, dev_priv->irq_enable_reg); + I915_WRITE(IER, dev_priv->irq_enable_reg); else - I915_WRITE16(I915REG_INT_ENABLE_R, dev_priv->irq_enable_reg); + I915_WRITE16(IER, dev_priv->irq_enable_reg); if (pipestat_reg) { pipestat = I915_READ (pipestat_reg); - pipestat &= ~(I915_START_VBLANK_INTERRUPT_ENABLE | - I915_VBLANK_INTERRUPT_ENABLE); + pipestat &= ~(PIPE_START_VBLANK_INTERRUPT_ENABLE | + PIPE_VBLANK_INTERRUPT_ENABLE); /* * Clear any pending status */ - pipestat |= (I915_START_VBLANK_INTERRUPT_STATUS | - I915_VBLANK_INTERRUPT_STATUS); + pipestat |= (PIPE_START_VBLANK_INTERRUPT_STATUS | + PIPE_VBLANK_INTERRUPT_STATUS); I915_WRITE(pipestat_reg, pipestat); } } @@ -973,11 +973,11 @@ void i915_enable_interrupt (struct drm_device *dev) dev_priv->irq_enable_reg |= I915_DISPLAY_PIPE_A_EVENT_INTERRUPT; /* Enable global interrupts for hotplug - not a pipeA event */ - I915_WRITE(I915REG_PIPEASTAT, I915_READ(I915REG_PIPEASTAT) | - I915_HOTPLUG_INTERRUPT_ENABLE | - I915_HOTPLUG_TV_INTERRUPT_ENABLE | - I915_HOTPLUG_TV_CLEAR | - I915_HOTPLUG_CLEAR); + I915_WRITE(PIPEASTAT, I915_READ(PIPEASTAT) | + PIPE_HOTPLUG_INTERRUPT_ENABLE | + PIPE_HOTPLUG_TV_INTERRUPT_ENABLE | + PIPE_HOTPLUG_TV_INTERRUPT_STATUS | + PIPE_HOTPLUG_INTERRUPT_STATUS); } if (dev_priv->irq_enable_reg & (I915_DISPLAY_PORT_INTERRUPT | I915_DISPLAY_PIPE_A_EVENT_INTERRUPT)) { @@ -1025,9 +1025,9 @@ void i915_enable_interrupt (struct drm_device *dev) } if (IS_I9XX(dev) && !IS_I915G(dev) && !IS_I915GM(dev)) - I915_WRITE(I915REG_INT_ENABLE_R, dev_priv->irq_enable_reg); + I915_WRITE(IER, dev_priv->irq_enable_reg); else - I915_WRITE16(I915REG_INT_ENABLE_R, dev_priv->irq_enable_reg); + I915_WRITE16(IER, dev_priv->irq_enable_reg); dev_priv->irq_enabled = 1; } @@ -1068,9 +1068,9 @@ int i915_vblank_pipe_get(struct drm_device *dev, void *data, } if (IS_I9XX(dev) && !IS_I915G(dev) && !IS_I915GM(dev)) - flag = I915_READ(I915REG_INT_ENABLE_R); + flag = I915_READ(IER); else - flag = I915_READ16(I915REG_INT_ENABLE_R); + flag = I915_READ16(IER); pipe->pipe = 0; if (flag & I915_DISPLAY_PIPE_A_EVENT_INTERRUPT) @@ -1249,23 +1249,23 @@ void i915_driver_irq_preinstall(struct drm_device * dev) struct drm_i915_private *dev_priv = (struct drm_i915_private *) dev->dev_private; u32 tmp; - tmp = I915_READ(I915REG_PIPEASTAT); - I915_WRITE(I915REG_PIPEASTAT, tmp); - tmp = I915_READ(I915REG_PIPEBSTAT); - I915_WRITE(I915REG_PIPEBSTAT, tmp); + tmp = I915_READ(PIPEASTAT); + I915_WRITE(PIPEASTAT, tmp); + tmp = I915_READ(PIPEBSTAT); + I915_WRITE(PIPEBSTAT, tmp); - I915_WRITE16(I915REG_HWSTAM, 0xeffe); + I915_WRITE16(HWSTAM, 0xeffe); if (IS_I9XX(dev) && !IS_I915G(dev) && !IS_I915GM(dev)) { - I915_WRITE(I915REG_INT_MASK_R, 0x0); - I915_WRITE(I915REG_INT_ENABLE_R, 0x0); - tmp = I915_READ(I915REG_INT_IDENTITY_R); - I915_WRITE(I915REG_INT_IDENTITY_R, tmp); + I915_WRITE(IMR, 0x0); + I915_WRITE(IER, 0x0); + tmp = I915_READ(IIR); + I915_WRITE(IIR, tmp); } else { - I915_WRITE16(I915REG_INT_MASK_R, 0x0); - I915_WRITE16(I915REG_INT_ENABLE_R, 0x0); - tmp = I915_READ16(I915REG_INT_IDENTITY_R); - I915_WRITE16(I915REG_INT_IDENTITY_R, tmp); + I915_WRITE16(IMR, 0x0); + I915_WRITE16(IER, 0x0); + tmp = I915_READ16(IIR); + I915_WRITE16(IIR, tmp); } } @@ -1300,7 +1300,7 @@ int i915_driver_irq_postinstall(struct drm_device * dev) * Initialize the hardware status page IRQ location. */ - I915_WRITE(I915REG_INSTPM, (1 << 5) | (1 << 21)); + I915_WRITE(INSTPM, (1 << 5) | (1 << 21)); return 0; } @@ -1314,23 +1314,23 @@ void i915_driver_irq_uninstall(struct drm_device * dev) dev_priv->irq_enabled = 0; - temp = I915_READ(I915REG_PIPEASTAT); - I915_WRITE(I915REG_PIPEASTAT, temp); - temp = I915_READ(I915REG_PIPEBSTAT); - I915_WRITE(I915REG_PIPEBSTAT, temp); + temp = I915_READ(PIPEASTAT); + I915_WRITE(PIPEASTAT, temp); + temp = I915_READ(PIPEBSTAT); + I915_WRITE(PIPEBSTAT, temp); if (IS_I9XX(dev) && !IS_I915G(dev) && !IS_I915GM(dev)) { - I915_WRITE(I915REG_HWSTAM, 0xffffffff); - I915_WRITE(I915REG_INT_MASK_R, 0xffffffff); - I915_WRITE(I915REG_INT_ENABLE_R, 0x0); + I915_WRITE(HWSTAM, 0xffffffff); + I915_WRITE(IMR, 0xffffffff); + I915_WRITE(IER, 0x0); - temp = I915_READ(I915REG_INT_IDENTITY_R); - I915_WRITE(I915REG_INT_IDENTITY_R, temp); + temp = I915_READ(IIR); + I915_WRITE(IIR, temp); } else { - I915_WRITE16(I915REG_HWSTAM, 0xffff); - I915_WRITE16(I915REG_INT_MASK_R, 0xffff); - I915_WRITE16(I915REG_INT_ENABLE_R, 0x0); + I915_WRITE16(HWSTAM, 0xffff); + I915_WRITE16(IMR, 0xffff); + I915_WRITE16(IER, 0x0); - temp = I915_READ16(I915REG_INT_IDENTITY_R); - I915_WRITE16(I915REG_INT_IDENTITY_R, temp); + temp = I915_READ16(IIR); + I915_WRITE16(IIR, temp); } } |