diff options
Diffstat (limited to 'shared-core')
| -rw-r--r-- | shared-core/r300_cmdbuf.c | 4 | ||||
| -rw-r--r-- | shared-core/r300_reg.h | 38 |
2 files changed, 35 insertions, 7 deletions
diff --git a/shared-core/r300_cmdbuf.c b/shared-core/r300_cmdbuf.c index acfd4f87..318cd3dd 100644 --- a/shared-core/r300_cmdbuf.c +++ b/shared-core/r300_cmdbuf.c @@ -208,13 +208,13 @@ void r300_init_reg_flags(void) ADD_RANGE(0x4F54, 1); ADD_RANGE(R300_TX_FILTER_0, 16); - ADD_RANGE(R300_TX_UNK1_0, 16); + ADD_RANGE(R300_TX_FILTER1_0, 16); ADD_RANGE(R300_TX_SIZE_0, 16); ADD_RANGE(R300_TX_FORMAT_0, 16); ADD_RANGE(R300_TX_PITCH_0, 16); /* Texture offset is dangerous and needs more checking */ ADD_RANGE_MARK(R300_TX_OFFSET_0, 16, MARK_CHECK_OFFSET); - ADD_RANGE(R300_TX_UNK4_0, 16); + ADD_RANGE(R300_TX_CHROMA_KEY_0, 16); ADD_RANGE(R300_TX_BORDER_COLOR_0, 16); /* Sporadic registers used as primitives are emitted */ diff --git a/shared-core/r300_reg.h b/shared-core/r300_reg.h index 83471317..0717e731 100644 --- a/shared-core/r300_reg.h +++ b/shared-core/r300_reg.h @@ -454,6 +454,9 @@ I am fairly certain that they are correct unless stated otherwise in comments. /* END */ /* gap */ +/* Zero to flush caches. */ +#define R300_TX_CNTL 0x4100 + /* The upper enable bits are guessed, based on fglrx reported limits. */ #define R300_TX_ENABLE 0x4104 # define R300_TX_ENABLE_0 (1 << 0) @@ -712,8 +715,22 @@ I am fairly certain that they are correct unless stated otherwise in comments. # define R300_TX_MAX_ANISO_16_TO_1 (8 << 21) # define R300_TX_MAX_ANISO_MASK (14 << 21) -#define R300_TX_UNK1_0 0x4440 +#define R300_TX_FILTER1_0 0x4440 +# define R300_CHROMA_KEY_MODE_DISABLE 0 +# define R300_CHROMA_KEY_FORCE 1 +# define R300_CHROMA_KEY_BLEND 2 +# define R300_MC_ROUND_NORMAL (0<<2) +# define R300_MC_ROUND_MPEG4 (1<<2) # define R300_LOD_BIAS_MASK 0x1fff +# define R300_EDGE_ANISO_EDGE_DIAG (0<<13) +# define R300_EDGE_ANISO_EDGE_ONLY (1<<13) +# define R300_MC_COORD_TRUNCATE_DISABLE (0<<14) +# define R300_MC_COORD_TRUNCATE_MPEG (1<<14) +# define R300_TX_TRI_PERF_0_8 (0<<15) +# define R300_TX_TRI_PERF_1_8 (1<<15) +# define R300_TX_TRI_PERF_1_4 (2<<15) +# define R300_TX_TRI_PERF_3_8 (3<<15) +# define R300_ANISO_THRESHOLD_MASK (7<<17) #define R300_TX_SIZE_0 0x4480 # define R300_TX_WIDTHMASK_SHIFT 0 @@ -723,6 +740,8 @@ I am fairly certain that they are correct unless stated otherwise in comments. # define R300_TX_UNK23 (1 << 23) # define R300_TX_SIZE_SHIFT 26 /* largest of width, height */ # define R300_TX_SIZE_MASK (15 << 26) +# define R300_TX_SIZE_PROJECTED (1<<30) +# define R300_TX_SIZE_TXPITCH_EN (1<<31) #define R300_TX_FORMAT_0 0x44C0 /* The interpretation of the format word by Wladimir van der Laan */ /* The X, Y, Z and W refer to the layout of the components. @@ -752,6 +771,7 @@ I am fairly certain that they are correct unless stated otherwise in comments. # define R300_TX_FORMAT_G8R8_G8B8 0x15 /* no swizzle */ /* 0x16 - some 16 bit green format.. ?? */ # define R300_TX_FORMAT_UNK25 (1 << 25) /* no swizzle */ +# define R300_TX_FORMAT_CUBIC_MAP (1 << 26) /* gap */ /* Floating point formats */ @@ -801,17 +821,19 @@ I am fairly certain that they are correct unless stated otherwise in comments. # define R300_TX_FORMAT_YUV_MODE 0x00800000 -#define R300_TX_PITCH_0 0x4500 +#define R300_TX_PITCH_0 0x4500 /* obvious missing in gap */ #define R300_TX_OFFSET_0 0x4540 /* BEGIN: Guess from R200 */ # define R300_TXO_ENDIAN_NO_SWAP (0 << 0) # define R300_TXO_ENDIAN_BYTE_SWAP (1 << 0) # define R300_TXO_ENDIAN_WORD_SWAP (2 << 0) # define R300_TXO_ENDIAN_HALFDW_SWAP (3 << 0) +# define R300_TXO_MACRO_TILE (1 << 2) +# define R300_TXO_MICRO_TILE (1 << 3) # define R300_TXO_OFFSET_MASK 0xffffffe0 # define R300_TXO_OFFSET_SHIFT 5 /* END */ -#define R300_TX_UNK4_0 0x4580 +#define R300_TX_CHROMA_KEY_0 0x4580 /* 32 bit chroma key */ #define R300_TX_BORDER_COLOR_0 0x45C0 //ff00ff00 == { 0, 1.0, 0, 1.0 } /* END */ @@ -869,7 +891,9 @@ I am fairly certain that they are correct unless stated otherwise in comments. # define R300_PFS_NODE_TEX_OFFSET_MASK (31 << 12) # define R300_PFS_NODE_TEX_END_SHIFT 17 # define R300_PFS_NODE_TEX_END_MASK (31 << 17) -# define R300_PFS_NODE_LAST_NODE (1 << 22) +/*# define R300_PFS_NODE_LAST_NODE (1 << 22) */ +# define R300_PFS_NODE_OUTPUT_COLOR (1 << 22) +# define R300_PFS_NODE_OUTPUT_DEPTH (1 << 23) /* TEX // As far as I can tell, texture instructions cannot write into output @@ -888,6 +912,7 @@ I am fairly certain that they are correct unless stated otherwise in comments. */ # define R300_FPITX_OPCODE_SHIFT 15 # define R300_FPITX_OP_TEX 1 +# define R300_FPITX_OP_KIL 2 # define R300_FPITX_OP_TXP 3 # define R300_FPITX_OP_TXB 4 @@ -963,9 +988,11 @@ I am fairly certain that they are correct unless stated otherwise in comments. # define R300_FPI1_SRC2C_CONST (1 << 17) # define R300_FPI1_DSTC_SHIFT 18 # define R300_FPI1_DSTC_MASK (31 << 18) +# define R300_FPI1_DSTC_REG_MASK_SHIFT 23 # define R300_FPI1_DSTC_REG_X (1 << 23) # define R300_FPI1_DSTC_REG_Y (1 << 24) # define R300_FPI1_DSTC_REG_Z (1 << 25) +# define R300_FPI1_DSTC_OUTPUT_MASK_SHIFT 26 # define R300_FPI1_DSTC_OUTPUT_X (1 << 26) # define R300_FPI1_DSTC_OUTPUT_Y (1 << 27) # define R300_FPI1_DSTC_OUTPUT_Z (1 << 28) @@ -984,6 +1011,7 @@ I am fairly certain that they are correct unless stated otherwise in comments. # define R300_FPI3_DSTA_MASK (31 << 18) # define R300_FPI3_DSTA_REG (1 << 23) # define R300_FPI3_DSTA_OUTPUT (1 << 24) +# define R300_FPI3_DSTA_DEPTH (1 << 27) #define R300_PFS_INSTR0_0 0x48C0 # define R300_FPI0_ARGC_SRC0C_XYZ 0 @@ -1037,7 +1065,7 @@ I am fairly certain that they are correct unless stated otherwise in comments. # define R300_FPI0_OUTC_FRC (9 << 23) # define R300_FPI0_OUTC_REPL_ALPHA (10 << 23) # define R300_FPI0_OUTC_SAT (1 << 30) -# define R300_FPI0_UNKNOWN_31 (1 << 31) +# define R300_FPI0_INSERT_NOP (1 << 31) #define R300_PFS_INSTR2_0 0x49C0 # define R300_FPI2_ARGA_SRC0C_X 0 |