diff options
Diffstat (limited to 'shared-core/i915_drm.h')
-rw-r--r-- | shared-core/i915_drm.h | 329 |
1 files changed, 327 insertions, 2 deletions
diff --git a/shared-core/i915_drm.h b/shared-core/i915_drm.h index 97e77428..53087b57 100644 --- a/shared-core/i915_drm.h +++ b/shared-core/i915_drm.h @@ -39,7 +39,7 @@ * of chars for next/prev indices */ #define I915_LOG_MIN_TEX_REGION_SIZE 14 -typedef struct _drm_i915_init { +typedef struct drm_i915_init { enum { I915_INIT_DMA = 0x01, I915_CLEANUP_DMA = 0x02, @@ -176,6 +176,22 @@ typedef struct drm_i915_sarea { #define DRM_I915_MMIO 0x10 #define DRM_I915_HWS_ADDR 0x11 #define DRM_I915_EXECBUFFER 0x12 +#define DRM_I915_GEM_INIT 0x13 +#define DRM_I915_GEM_EXECBUFFER 0x14 +#define DRM_I915_GEM_PIN 0x15 +#define DRM_I915_GEM_UNPIN 0x16 +#define DRM_I915_GEM_BUSY 0x17 +#define DRM_I915_GEM_THROTTLE 0x18 +#define DRM_I915_GEM_ENTERVT 0x19 +#define DRM_I915_GEM_LEAVEVT 0x1a +#define DRM_I915_GEM_CREATE 0x1b +#define DRM_I915_GEM_PREAD 0x1c +#define DRM_I915_GEM_PWRITE 0x1d +#define DRM_I915_GEM_MMAP 0x1e +#define DRM_I915_GEM_SET_DOMAIN 0x1f +#define DRM_I915_GEM_SW_FINISH 0x20 +#define DRM_I915_GEM_SET_TILING 0x21 +#define DRM_I915_GEM_GET_TILING 0x22 #define DRM_IOCTL_I915_INIT DRM_IOW( DRM_COMMAND_BASE + DRM_I915_INIT, drm_i915_init_t) #define DRM_IOCTL_I915_FLUSH DRM_IO ( DRM_COMMAND_BASE + DRM_I915_FLUSH) @@ -195,6 +211,22 @@ typedef struct drm_i915_sarea { #define DRM_IOCTL_I915_VBLANK_SWAP DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_VBLANK_SWAP, drm_i915_vblank_swap_t) #define DRM_IOCTL_I915_MMIO DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_MMIO, drm_i915_mmio) #define DRM_IOCTL_I915_EXECBUFFER DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_EXECBUFFER, struct drm_i915_execbuffer) +#define DRM_IOCTL_I915_GEM_INIT DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_INIT, struct drm_i915_gem_init) +#define DRM_IOCTL_I915_GEM_EXECBUFFER DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_EXECBUFFER, struct drm_i915_gem_execbuffer) +#define DRM_IOCTL_I915_GEM_PIN DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_PIN, struct drm_i915_gem_pin) +#define DRM_IOCTL_I915_GEM_UNPIN DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_UNPIN, struct drm_i915_gem_unpin) +#define DRM_IOCTL_I915_GEM_BUSY DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_BUSY, struct drm_i915_gem_busy) +#define DRM_IOCTL_I915_GEM_THROTTLE DRM_IO ( DRM_COMMAND_BASE + DRM_I915_GEM_THROTTLE) +#define DRM_IOCTL_I915_GEM_ENTERVT DRM_IO(DRM_COMMAND_BASE + DRM_I915_GEM_ENTERVT) +#define DRM_IOCTL_I915_GEM_LEAVEVT DRM_IO(DRM_COMMAND_BASE + DRM_I915_GEM_LEAVEVT) +#define DRM_IOCTL_I915_GEM_CREATE DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_CREATE, struct drm_i915_gem_create) +#define DRM_IOCTL_I915_GEM_PREAD DRM_IOW (DRM_COMMAND_BASE + DRM_I915_GEM_PREAD, struct drm_i915_gem_pread) +#define DRM_IOCTL_I915_GEM_PWRITE DRM_IOW (DRM_COMMAND_BASE + DRM_I915_GEM_PWRITE, struct drm_i915_gem_pwrite) +#define DRM_IOCTL_I915_GEM_MMAP DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_MMAP, struct drm_i915_gem_mmap) +#define DRM_IOCTL_I915_GEM_SET_DOMAIN DRM_IOW (DRM_COMMAND_BASE + DRM_I915_GEM_SET_DOMAIN, struct drm_i915_gem_set_domain) +#define DRM_IOCTL_I915_GEM_SW_FINISH DRM_IOW (DRM_COMMAND_BASE + DRM_I915_GEM_SW_FINISH, struct drm_i915_gem_sw_finish) +#define DRM_IOCTL_I915_GEM_SET_TILING DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_SET_TILING, struct drm_i915_gem_set_tiling) +#define DRM_IOCTL_I915_GEM_GET_TILING DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_GET_TILING, struct drm_i915_gem_get_tiling) /* Asynchronous page flipping: */ @@ -223,7 +255,7 @@ typedef struct drm_i915_batchbuffer { /* As above, but pass a pointer to userspace buffer which can be * validated by the kernel prior to sending to hardware. */ -typedef struct _drm_i915_cmdbuffer { +typedef struct drm_i915_cmdbuffer { char __user *buf; /* pointer to userspace command buffer */ int sz; /* nr bytes in buf */ int DR1; /* hw flags for GFX_OP_DRAWRECT_INFO */ @@ -248,6 +280,7 @@ typedef struct drm_i915_irq_wait { #define I915_PARAM_ALLOW_BATCHBUFFER 2 #define I915_PARAM_LAST_DISPATCH 3 #define I915_PARAM_CHIPSET_ID 4 +#define I915_PARAM_HAS_GEM 5 typedef struct drm_i915_getparam { int param; @@ -326,6 +359,10 @@ typedef struct drm_i915_vblank_swap { #define MMIO_REGS_CL_INVOCATION_COUNT 6 #define MMIO_REGS_PS_INVOCATION_COUNT 7 #define MMIO_REGS_PS_DEPTH_COUNT 8 +#define MMIO_REGS_DOVSTA 9 +#define MMIO_REGS_GAMMA 10 +#define MMIO_REGS_FENCE 11 +#define MMIO_REGS_FENCE_NEW 12 typedef struct drm_i915_mmio_entry { unsigned int flag; @@ -395,4 +432,292 @@ struct drm_i915_execbuffer { struct drm_fence_arg fence_arg; }; +struct drm_i915_gem_init { + /** + * Beginning offset in the GTT to be managed by the DRM memory + * manager. + */ + uint64_t gtt_start; + /** + * Ending offset in the GTT to be managed by the DRM memory + * manager. + */ + uint64_t gtt_end; +}; + +struct drm_i915_gem_create { + /** + * Requested size for the object. + * + * The (page-aligned) allocated size for the object will be returned. + */ + uint64_t size; + /** + * Returned handle for the object. + * + * Object handles are nonzero. + */ + uint32_t handle; + uint32_t pad; +}; + +struct drm_i915_gem_pread { + /** Handle for the object being read. */ + uint32_t handle; + uint32_t pad; + /** Offset into the object to read from */ + uint64_t offset; + /** Length of data to read */ + uint64_t size; + /** Pointer to write the data into. */ + uint64_t data_ptr; /* void *, but pointers are not 32/64 compatible */ +}; + +struct drm_i915_gem_pwrite { + /** Handle for the object being written to. */ + uint32_t handle; + uint32_t pad; + /** Offset into the object to write to */ + uint64_t offset; + /** Length of data to write */ + uint64_t size; + /** Pointer to read the data from. */ + uint64_t data_ptr; /* void *, but pointers are not 32/64 compatible */ +}; + +struct drm_i915_gem_mmap { + /** Handle for the object being mapped. */ + uint32_t handle; + uint32_t pad; + /** Offset in the object to map. */ + uint64_t offset; + /** + * Length of data to map. + * + * The value will be page-aligned. + */ + uint64_t size; + /** Returned pointer the data was mapped at */ + uint64_t addr_ptr; /* void *, but pointers are not 32/64 compatible */ +}; + +struct drm_i915_gem_set_domain { + /** Handle for the object */ + uint32_t handle; + + /** New read domains */ + uint32_t read_domains; + + /** New write domain */ + uint32_t write_domain; +}; + +struct drm_i915_gem_sw_finish { + /** Handle for the object */ + uint32_t handle; +}; + +struct drm_i915_gem_relocation_entry { + /** + * Handle of the buffer being pointed to by this relocation entry. + * + * It's appealing to make this be an index into the mm_validate_entry + * list to refer to the buffer, but this allows the driver to create + * a relocation list for state buffers and not re-write it per + * exec using the buffer. + */ + uint32_t target_handle; + + /** + * Value to be added to the offset of the target buffer to make up + * the relocation entry. + */ + uint32_t delta; + + /** Offset in the buffer the relocation entry will be written into */ + uint64_t offset; + + /** + * Offset value of the target buffer that the relocation entry was last + * written as. + * + * If the buffer has the same offset as last time, we can skip syncing + * and writing the relocation. This value is written back out by + * the execbuffer ioctl when the relocation is written. + */ + uint64_t presumed_offset; + + /** + * Target memory domains read by this operation. + */ + uint32_t read_domains; + + /** + * Target memory domains written by this operation. + * + * Note that only one domain may be written by the whole + * execbuffer operation, so that where there are conflicts, + * the application will get -EINVAL back. + */ + uint32_t write_domain; +}; + +/** @{ + * Intel memory domains + * + * Most of these just align with the various caches in + * the system and are used to flush and invalidate as + * objects end up cached in different domains. + */ +/** CPU cache */ +#define I915_GEM_DOMAIN_CPU 0x00000001 +/** Render cache, used by 2D and 3D drawing */ +#define I915_GEM_DOMAIN_RENDER 0x00000002 +/** Sampler cache, used by texture engine */ +#define I915_GEM_DOMAIN_SAMPLER 0x00000004 +/** Command queue, used to load batch buffers */ +#define I915_GEM_DOMAIN_COMMAND 0x00000008 +/** Instruction cache, used by shader programs */ +#define I915_GEM_DOMAIN_INSTRUCTION 0x00000010 +/** Vertex address cache */ +#define I915_GEM_DOMAIN_VERTEX 0x00000020 +/** GTT domain - aperture and scanout */ +#define I915_GEM_DOMAIN_GTT 0x00000040 +/** @} */ + +struct drm_i915_gem_exec_object { + /** + * User's handle for a buffer to be bound into the GTT for this + * operation. + */ + uint32_t handle; + + /** Number of relocations to be performed on this buffer */ + uint32_t relocation_count; + /** + * Pointer to array of struct drm_i915_gem_relocation_entry containing + * the relocations to be performed in this buffer. + */ + uint64_t relocs_ptr; + + /** Required alignment in graphics aperture */ + uint64_t alignment; + + /** + * Returned value of the updated offset of the object, for future + * presumed_offset writes. + */ + uint64_t offset; +}; + +struct drm_i915_gem_execbuffer { + /** + * List of buffers to be validated with their relocations to be + * performend on them. + * + * This is a pointer to an array of struct drm_i915_gem_validate_entry. + * + * These buffers must be listed in an order such that all relocations + * a buffer is performing refer to buffers that have already appeared + * in the validate list. + */ + uint64_t buffers_ptr; + uint32_t buffer_count; + + /** Offset in the batchbuffer to start execution from. */ + uint32_t batch_start_offset; + /** Bytes used in batchbuffer from batch_start_offset */ + uint32_t batch_len; + uint32_t DR1; + uint32_t DR4; + uint32_t num_cliprects; + uint64_t cliprects_ptr; /* struct drm_clip_rect *cliprects */ +}; + +struct drm_i915_gem_pin { + /** Handle of the buffer to be pinned. */ + uint32_t handle; + uint32_t pad; + + /** alignment required within the aperture */ + uint64_t alignment; + + /** Returned GTT offset of the buffer. */ + uint64_t offset; +}; + +struct drm_i915_gem_unpin { + /** Handle of the buffer to be unpinned. */ + uint32_t handle; + uint32_t pad; +}; + +struct drm_i915_gem_busy { + /** Handle of the buffer to check for busy */ + uint32_t handle; + + /** Return busy status (1 if busy, 0 if idle) */ + uint32_t busy; +}; + +#define I915_TILING_NONE 0 +#define I915_TILING_X 1 +#define I915_TILING_Y 2 + +#define I915_BIT_6_SWIZZLE_NONE 0 +#define I915_BIT_6_SWIZZLE_9 1 +#define I915_BIT_6_SWIZZLE_9_10 2 +#define I915_BIT_6_SWIZZLE_9_11 3 +#define I915_BIT_6_SWIZZLE_9_10_11 4 +/* Not seen by userland */ +#define I915_BIT_6_SWIZZLE_UNKNOWN 5 + +struct drm_i915_gem_set_tiling { + /** Handle of the buffer to have its tiling state updated */ + uint32_t handle; + + /** + * Tiling mode for the object (I915_TILING_NONE, I915_TILING_X, + * I915_TILING_Y). + * + * This value is to be set on request, and will be updated by the + * kernel on successful return with the actual chosen tiling layout. + * + * The tiling mode may be demoted to I915_TILING_NONE when the system + * has bit 6 swizzling that can't be managed correctly by GEM. + * + * Buffer contents become undefined when changing tiling_mode. + */ + uint32_t tiling_mode; + + /** + * Stride in bytes for the object when in I915_TILING_X or + * I915_TILING_Y. + */ + uint32_t stride; + + /** + * Returned address bit 6 swizzling required for CPU access through + * mmap mapping. + */ + uint32_t swizzle_mode; +}; + +struct drm_i915_gem_get_tiling { + /** Handle of the buffer to get tiling state for. */ + uint32_t handle; + + /** + * Current tiling mode for the object (I915_TILING_NONE, I915_TILING_X, + * I915_TILING_Y). + */ + uint32_t tiling_mode; + + /** + * Returned address bit 6 swizzling required for CPU access through + * mmap mapping. + */ + uint32_t swizzle_mode; +}; + #endif /* _I915_DRM_H_ */ |