diff options
Diffstat (limited to 'linux-core')
86 files changed, 17820 insertions, 369 deletions
diff --git a/linux-core/Makefile b/linux-core/Makefile index fc32676f..846386a5 100644 --- a/linux-core/Makefile +++ b/linux-core/Makefile @@ -59,7 +59,7 @@ endif # Modules for all architectures MODULE_LIST := drm.o tdfx.o r128.o radeon.o mga.o sis.o savage.o via.o \ - mach64.o nv.o nouveau.o xgi.o + mach64.o nv.o nouveau.o xgi.o radeon_ms.o # Modules only for ix86 architectures ifneq (,$(findstring 86,$(MACHINE))) @@ -93,6 +93,7 @@ NVHEADERS = nv_drv.h $(DRMHEADERS) FFBHEADERS = ffb_drv.h $(DRMHEADERS) NOUVEAUHEADERS = nouveau_drv.h nouveau_drm.h nouveau_reg.h $(DRMHEADERS) XGIHEADERS = xgi_cmdlist.h xgi_drv.h xgi_misc.h xgi_regs.h $(DRMHEADERS) +RADEONMSHEADERS = radeon_ms_driver.h $(DRMHEADERS) PROGS = dristat drmstat @@ -287,6 +288,7 @@ CONFIG_DRM_MACH64 := n CONFIG_DRM_NV := n CONFIG_DRM_NOUVEAU := n CONFIG_DRM_XGI := n +CONFIG_DRM_RADEON_MS := n # Enable module builds for the modules requested/supported. @@ -326,6 +328,9 @@ endif ifneq (,$(findstring xgi,$(DRM_MODULES))) CONFIG_DRM_XGI := m endif +ifneq (,$(findstring radeon_ms,$(DRM_MODULES))) +#CONFIG_DRM_RADEON_MS := m +endif # These require AGP support diff --git a/linux-core/Makefile.kernel b/linux-core/Makefile.kernel index 82d200b3..29503004 100644 --- a/linux-core/Makefile.kernel +++ b/linux-core/Makefile.kernel @@ -13,14 +13,19 @@ drm-objs := drm_auth.o drm_bufs.o drm_context.o drm_dma.o drm_drawable.o \ drm_sysfs.o drm_pci.o drm_agpsupport.o drm_scatter.o \ drm_memory_debug.o ati_pcigart.o drm_sman.o \ drm_hashtab.o drm_memrange.o drm_object.o drm_compat.o \ - drm_fence.o drm_ttm.o drm_bo.o drm_bo_move.o drm_bo_lock.o \ - drm_regman.o drm_vm_nopage_compat.o drm_gem.o + drm_fence.o drm_ttm.o drm_bo.o drm_bo_move.o drm_crtc.o \ + drm_edid.o drm_modes.o drm_bo_lock.o drm_regman.o \ + drm_vm_nopage_compat.o drm_crtc_helper.o drm_gem.o tdfx-objs := tdfx_drv.o r128-objs := r128_drv.o r128_cce.o r128_state.o r128_irq.o mga-objs := mga_drv.o mga_dma.o mga_state.o mga_warp.o mga_irq.o i810-objs := i810_drv.o i810_dma.o i915-objs := i915_drv.o i915_dma.o i915_irq.o i915_mem.o i915_fence.o \ - i915_buffer.o i915_compat.o i915_execbuf.o i915_gem.o + i915_buffer.o i915_execbuf.o i915_gem.o \ + intel_display.o intel_crt.o intel_lvds.o intel_bios.o \ + intel_sdvo.o intel_modes.o intel_i2c.o i915_init.o intel_fb.o \ + intel_tv.o i915_compat.o intel_dvo.o dvo_ch7xxx.o \ + dvo_ch7017.o dvo_ivch.o dvo_tfp410.o dvo_sil164.o nouveau-objs := nouveau_drv.o nouveau_state.o nouveau_fifo.o nouveau_mem.o \ nouveau_object.o nouveau_irq.o nouveau_notifier.o nouveau_swmthd.o \ nouveau_sgdma.o nouveau_dma.o nouveau_bo.o nouveau_fence.o \ @@ -32,6 +37,14 @@ nouveau-objs := nouveau_drv.o nouveau_state.o nouveau_fifo.o nouveau_mem.o \ nv40_graph.o nv50_graph.o \ nv04_instmem.o nv50_instmem.o radeon-objs := radeon_drv.o radeon_cp.o radeon_state.o radeon_mem.o radeon_irq.o r300_cmdbuf.o +radeon_ms-objs := radeon_ms_drv.o radeon_ms_drm.o radeon_ms_family.o \ + radeon_ms_state.o radeon_ms_bo.o radeon_ms_irq.o \ + radeon_ms_bus.o radeon_ms_fence.o \ + radeon_ms_cp.o radeon_ms_cp_mc.o radeon_ms_i2c.o \ + radeon_ms_output.o radeon_ms_crtc.o radeon_ms_fb.o \ + radeon_ms_exec.o radeon_ms_gpu.o radeon_ms_dac.o \ + radeon_ms_properties.o radeon_ms_rom.o radeon_ms_combios.o \ + amd_legacy_cbuffer.o sis-objs := sis_drv.o sis_mm.o ffb-objs := ffb_drv.o ffb_context.o savage-objs := savage_drv.o savage_bci.o savage_state.o @@ -45,6 +58,7 @@ xgi-objs := xgi_cmdlist.o xgi_drv.o xgi_fb.o xgi_misc.o xgi_pcie.o \ ifeq ($(CONFIG_COMPAT),y) drm-objs += drm_ioc32.o radeon-objs += radeon_ioc32.o +radeon_ms-objs += radeon_ms_compat.o mga-objs += mga_ioc32.o r128-objs += r128_ioc32.o i915-objs += i915_ioc32.o @@ -67,3 +81,4 @@ obj-$(CONFIG_DRM_MACH64)+= mach64.o obj-$(CONFIG_DRM_NV) += nv.o obj-$(CONFIG_DRM_NOUVEAU) += nouveau.o obj-$(CONFIG_DRM_XGI) += xgi.o +obj-$(CONFIG_DRM_RADEON_MS) += radeon_ms.o diff --git a/linux-core/amd.h b/linux-core/amd.h new file mode 120000 index 00000000..b4882447 --- /dev/null +++ b/linux-core/amd.h @@ -0,0 +1 @@ +../shared-core/amd.h
\ No newline at end of file diff --git a/linux-core/amd_legacy.h b/linux-core/amd_legacy.h new file mode 120000 index 00000000..1a7786fc --- /dev/null +++ b/linux-core/amd_legacy.h @@ -0,0 +1 @@ +../shared-core/amd_legacy.h
\ No newline at end of file diff --git a/linux-core/amd_legacy_cbuffer.c b/linux-core/amd_legacy_cbuffer.c new file mode 120000 index 00000000..eab329b5 --- /dev/null +++ b/linux-core/amd_legacy_cbuffer.c @@ -0,0 +1 @@ +../shared-core/amd_legacy_cbuffer.c
\ No newline at end of file diff --git a/linux-core/amd_legacy_fence.h b/linux-core/amd_legacy_fence.h new file mode 120000 index 00000000..e7b30f25 --- /dev/null +++ b/linux-core/amd_legacy_fence.h @@ -0,0 +1 @@ +../shared-core/amd_legacy_fence.h
\ No newline at end of file diff --git a/linux-core/drmP.h b/linux-core/drmP.h index 8246f44a..c18159f8 100644 --- a/linux-core/drmP.h +++ b/linux-core/drmP.h @@ -112,7 +112,8 @@ typedef unsigned long uintptr_t; #define DRIVER_IRQ_SHARED 0x80 #define DRIVER_DMA_QUEUE 0x100 #define DRIVER_FB_DMA 0x200 -#define DRIVER_GEM 0x400 +#define DRIVER_MODESET 0x400 +#define DRIVER_GEM 0x800 /*@}*/ @@ -266,11 +267,11 @@ typedef unsigned long uintptr_t; */ #define LOCK_TEST_WITH_RETURN( dev, file_priv ) \ do { \ - if ( !_DRM_LOCK_IS_HELD( dev->lock.hw_lock->lock ) || \ - dev->lock.file_priv != file_priv ) { \ + if ( !_DRM_LOCK_IS_HELD( file_priv->master->lock.hw_lock->lock ) || \ + file_priv->master->lock.file_priv != file_priv ) { \ DRM_ERROR( "%s called without lock held, held %d owner %p %p\n",\ - __FUNCTION__, _DRM_LOCK_IS_HELD( dev->lock.hw_lock->lock ),\ - dev->lock.file_priv, file_priv ); \ + __FUNCTION__, _DRM_LOCK_IS_HELD( file_priv->master->lock.hw_lock->lock ),\ + file_priv->master->lock.file_priv, file_priv ); \ return -EINVAL; \ } \ } while (0) @@ -304,6 +305,7 @@ typedef int drm_ioctl_compat_t(struct file *filp, unsigned int cmd, #define DRM_AUTH 0x1 #define DRM_MASTER 0x2 #define DRM_ROOT_ONLY 0x4 +#define DRM_CONTROL_ALLOW 0x8 // allow ioctl to operate on control node struct drm_ioctl_desc { unsigned int cmd; @@ -413,14 +415,12 @@ enum drm_ref_type { /** File private data */ struct drm_file { int authenticated; - int master; pid_t pid; uid_t uid; drm_magic_t magic; unsigned long ioctl_count; struct list_head lhead; struct drm_minor *minor; - int remove_auth_on_close; unsigned long lock_count; /* @@ -440,6 +440,11 @@ struct drm_file { struct drm_open_hash refd_object_hash[_DRM_NO_REF_TYPES]; struct file *filp; void *driver_priv; + + int is_master; /* this file private is a master for a minor */ + struct drm_master *master; /* master this node is currently associated with + N.B. not always minor->master */ + struct list_head fbs; }; /** Wait queue */ @@ -578,6 +583,8 @@ struct drm_map_list { struct drm_hash_item hash; struct drm_map *map; /**< mapping */ uint64_t user_token; + struct drm_master *master; /** if this map is associated with a specific + master */ struct drm_memrange_node *file_offset_node; }; @@ -599,6 +606,13 @@ struct drm_vbl_sig { struct task_struct *task; }; +struct drm_hotplug_sig { + struct list_head head; + unsigned int counter; + struct siginfo info; + struct task_struct *task; +}; + /* location of GART table */ #define DRM_ATI_GART_MAIN 1 #define DRM_ATI_GART_FB 2 @@ -670,6 +684,29 @@ struct drm_gem_object { }; #include "drm_objects.h" +#include "drm_crtc.h" + +/* per-master structure */ +struct drm_master { + + struct list_head head; /**< each minor contains a list of masters */ + struct drm_minor *minor; /**< link back to minor we are a master for */ + + char *unique; /**< Unique identifier: e.g., busid */ + int unique_len; /**< Length of unique field */ + + int blocked; /**< Blocked due to VC switch? */ + + /** \name Authentication */ + /*@{ */ + struct drm_open_hash magiclist; + struct list_head magicfree; + /*@} */ + + struct drm_lock_data lock; /**< Information on hardware lock */ + + void *driver_priv; /**< Private structure for driver to use */ +}; /** * DRM driver structure. This structure represent the common code for @@ -770,6 +807,9 @@ struct drm_driver { void (*set_version) (struct drm_device *dev, struct drm_set_version *sv); + /* Master routines */ + int (*master_create)(struct drm_device *dev, struct drm_master *master); + void (*master_destroy)(struct drm_device *dev, struct drm_master *master); /** * Driver-specific constructor for drm_gem_objects, to set up * obj->driver_private. @@ -815,6 +855,8 @@ struct drm_driver { #define DRM_MINOR_UNASSIGNED 0 #define DRM_MINOR_LEGACY 1 +#define DRM_MINOR_CONTROL 2 +#define DRM_MINOR_RENDER 3 /** * DRM minor structure. This structure represents a drm minor number. @@ -825,8 +867,15 @@ struct drm_minor { dev_t device; /**< Device number for mknod */ struct device kdev; /**< Linux device */ struct drm_device *dev; + /* for render nodes */ struct proc_dir_entry *dev_root; /**< proc directory entry */ struct class_device *dev_class; + + /* for control nodes - a pointer to the current master for this control node */ + struct drm_master *master; /* currently active master for this node */ + struct list_head master_list; + + struct drm_mode_group mode_group; }; @@ -835,13 +884,9 @@ struct drm_minor { * may contain multiple heads. */ struct drm_device { - char *unique; /**< Unique identifier: e.g., busid */ - int unique_len; /**< Length of unique field */ char *devname; /**< For /proc/interrupts */ int if_version; /**< Highest interface version set */ - int blocked; /**< Blocked due to VC switch? */ - /** \name Locks */ /*@{ */ spinlock_t count_lock; /**< For inuse, drm_device::open_count, drm_device::buf_use */ @@ -864,12 +909,6 @@ struct drm_device { atomic_t counts[15]; /*@} */ - /** \name Authentication */ - /*@{ */ - struct list_head filelist; - struct drm_open_hash magiclist; - struct list_head magicfree; - /*@} */ /** \name Memory management */ /*@{ */ @@ -890,7 +929,9 @@ struct drm_device { struct idr ctx_idr; struct list_head vmalist; /**< List of vmas (for debugging) */ - struct drm_lock_data lock; /**< Information on hardware lock */ + + struct list_head filelist; + /*@} */ /** \name DMA queues (contexts) */ @@ -902,6 +943,7 @@ struct drm_device { struct drm_device_dma *dma; /**< Optional pointer for DMA support */ /*@} */ + /** \name Context support */ /*@{ */ int irq; /**< Interrupt used by board */ @@ -918,6 +960,15 @@ struct drm_device { struct work_struct work; + /** \name HOTPLUG IRQ support */ + /*@{ */ + wait_queue_head_t hotplug_queue; /**< HOTPLUG wait queue */ + spinlock_t hotplug_lock; + struct list_head *hotplug_sigs; /**< signal list to send on HOTPLUG */ + atomic_t hotplug_signal_pending; /* number of signals pending on all crtcs*/ + + /*@} */ + /** \name VBLANK IRQ support */ /*@{ */ @@ -964,6 +1015,9 @@ struct drm_device { struct drm_driver *driver; drm_local_map_t *agp_buffer_map; unsigned int agp_buffer_token; + + /* minor number for control node */ + struct drm_minor *control; struct drm_minor *primary; /**< render type primary screen head */ struct drm_fence_manager fm; @@ -975,6 +1029,9 @@ struct drm_device { struct idr drw_idr; /*@} */ + /* DRM mode setting */ + struct drm_mode_config mode_config; + /** \name GEM information */ /*@{ */ spinlock_t object_name_lock; @@ -994,6 +1051,17 @@ struct drm_agp_ttm_backend { }; #endif +typedef struct ati_pcigart_ttm_backend { + struct drm_ttm_backend backend; + int populated; + void (*gart_flush_fn)(struct drm_device *dev); + struct drm_ati_pcigart_info *gart_info; + unsigned long offset; + struct page **pages; + int num_pages; + int bound; + struct drm_device *dev; +} ati_pcigart_ttm_backend_t; static __inline__ int drm_core_check_feature(struct drm_device *dev, int feature) @@ -1186,7 +1254,8 @@ extern void drm_idlelock_take(struct drm_lock_data *lock_data); extern void drm_idlelock_release(struct drm_lock_data *lock_data); extern int drm_client_lock_take(struct drm_device *dev, struct drm_file *file_priv); -extern void drm_client_lock_release(struct drm_device *dev); +extern void drm_client_lock_release(struct drm_device *dev, + struct drm_file *file_priv); /* * These are exported to drivers so that they can implement fencing using @@ -1245,13 +1314,17 @@ extern void drm_driver_irq_preinstall(struct drm_device *dev); extern void drm_driver_irq_postinstall(struct drm_device *dev); extern void drm_driver_irq_uninstall(struct drm_device *dev); +extern int drm_hotplug_init(struct drm_device *dev); +extern int drm_wait_hotplug(struct drm_device *dev, void *data, struct drm_file *filp); extern int drm_vblank_init(struct drm_device *dev, int num_crtcs); extern int drm_wait_vblank(struct drm_device *dev, void *data, struct drm_file *filp); +extern int drm_wait_hotplug(struct drm_device *dev, void *data, struct drm_file *filp); extern int drm_vblank_wait(struct drm_device * dev, unsigned int *vbl_seq); extern void drm_locked_tasklet(struct drm_device *dev, void(*func)(struct drm_device*)); extern u32 drm_vblank_count(struct drm_device *dev, int crtc); extern void drm_update_vblank_count(struct drm_device *dev, int crtc); extern void drm_handle_vblank(struct drm_device *dev, int crtc); +extern void drm_handle_hotplug(struct drm_device *dev); extern int drm_vblank_get(struct drm_device *dev, int crtc); extern void drm_vblank_put(struct drm_device *dev, int crtc); @@ -1296,6 +1369,12 @@ extern int drm_agp_unbind_memory(DRM_AGP_MEM * handle); extern struct drm_ttm_backend *drm_agp_init_ttm(struct drm_device *dev); extern void drm_agp_chipset_flush(struct drm_device *dev); /* Stub support (drm_stub.h) */ +extern int drm_setmaster_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv); +extern int drm_dropmaster_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv); +extern struct drm_master *drm_get_master(struct drm_minor *minor); +extern void drm_put_master(struct drm_master *master); extern int drm_get_dev(struct pci_dev *pdev, const struct pci_device_id *ent, struct drm_driver *driver); extern int drm_put_dev(struct drm_device *dev); @@ -1336,7 +1415,11 @@ struct drm_sysfs_class; extern struct class *drm_sysfs_create(struct module *owner, char *name); extern void drm_sysfs_destroy(void); extern int drm_sysfs_device_add(struct drm_minor *minor); +extern void drm_sysfs_hotplug_event(struct drm_device *dev); extern void drm_sysfs_device_remove(struct drm_minor *minor); +extern char *drm_get_connector_status_name(enum drm_connector_status status); +extern int drm_sysfs_connector_add(struct drm_connector *connector); +extern void drm_sysfs_connector_remove(struct drm_connector *connector); /* * Basic memory manager support (drm_memrange.c) @@ -1358,7 +1441,6 @@ extern int drm_memrange_remove_space_from_tail(struct drm_memrange *mm, unsigned long size); extern int drm_memrange_add_space_to_tail(struct drm_memrange *mm, unsigned long size); - static inline struct drm_memrange *drm_get_mm(struct drm_memrange_node *block) { return block->mm; diff --git a/linux-core/drm_auth.c b/linux-core/drm_auth.c index c904a91d..20c8a634 100644 --- a/linux-core/drm_auth.c +++ b/linux-core/drm_auth.c @@ -45,14 +45,15 @@ * the one with matching magic number, while holding the drm_device::struct_mutex * lock. */ -static struct drm_file *drm_find_file(struct drm_device * dev, drm_magic_t magic) +static struct drm_file *drm_find_file(struct drm_master *master , drm_magic_t magic) { struct drm_file *retval = NULL; struct drm_magic_entry *pt; struct drm_hash_item *hash; + struct drm_device *dev = master->minor->dev; mutex_lock(&dev->struct_mutex); - if (!drm_ht_find_item(&dev->magiclist, (unsigned long)magic, &hash)) { + if (!drm_ht_find_item(&master->magiclist, (unsigned long)magic, &hash)) { pt = drm_hash_entry(hash, struct drm_magic_entry, hash_item); retval = pt->priv; } @@ -71,11 +72,11 @@ static struct drm_file *drm_find_file(struct drm_device * dev, drm_magic_t magic * associated the magic number hash key in drm_device::magiclist, while holding * the drm_device::struct_mutex lock. */ -static int drm_add_magic(struct drm_device * dev, struct drm_file * priv, +static int drm_add_magic(struct drm_master *master, struct drm_file * priv, drm_magic_t magic) { struct drm_magic_entry *entry; - + struct drm_device *dev = master->minor->dev; DRM_DEBUG("%d\n", magic); entry = drm_alloc(sizeof(*entry), DRM_MEM_MAGIC); @@ -85,8 +86,8 @@ static int drm_add_magic(struct drm_device * dev, struct drm_file * priv, entry->priv = priv; entry->hash_item.key = (unsigned long)magic; mutex_lock(&dev->struct_mutex); - drm_ht_insert_item(&dev->magiclist, &entry->hash_item); - list_add_tail(&entry->head, &dev->magicfree); + drm_ht_insert_item(&master->magiclist, &entry->hash_item); + list_add_tail(&entry->head, &master->magicfree); mutex_unlock(&dev->struct_mutex); return 0; @@ -101,20 +102,21 @@ static int drm_add_magic(struct drm_device * dev, struct drm_file * priv, * Searches and unlinks the entry in drm_device::magiclist with the magic * number hash key, while holding the drm_device::struct_mutex lock. */ -static int drm_remove_magic(struct drm_device * dev, drm_magic_t magic) +static int drm_remove_magic(struct drm_master *master, drm_magic_t magic) { struct drm_magic_entry *pt; struct drm_hash_item *hash; + struct drm_device *dev = master->minor->dev; DRM_DEBUG("%d\n", magic); mutex_lock(&dev->struct_mutex); - if (drm_ht_find_item(&dev->magiclist, (unsigned long)magic, &hash)) { + if (drm_ht_find_item(&master->magiclist, (unsigned long)magic, &hash)) { mutex_unlock(&dev->struct_mutex); return -EINVAL; } pt = drm_hash_entry(hash, struct drm_magic_entry, hash_item); - drm_ht_remove_item(&dev->magiclist, hash); + drm_ht_remove_item(&master->magiclist, hash); list_del(&pt->head); mutex_unlock(&dev->struct_mutex); @@ -152,9 +154,9 @@ int drm_getmagic(struct drm_device *dev, void *data, struct drm_file *file_priv) ++sequence; /* reserve 0 */ auth->magic = sequence++; spin_unlock(&lock); - } while (drm_find_file(dev, auth->magic)); + } while (drm_find_file(file_priv->master, auth->magic)); file_priv->magic = auth->magic; - drm_add_magic(dev, file_priv, auth->magic); + drm_add_magic(file_priv->master, file_priv, auth->magic); } DRM_DEBUG("%u\n", auth->magic); @@ -180,9 +182,9 @@ int drm_authmagic(struct drm_device *dev, void *data, struct drm_file *file; DRM_DEBUG("%u\n", auth->magic); - if ((file = drm_find_file(dev, auth->magic))) { + if ((file = drm_find_file(file_priv->master, auth->magic))) { file->authenticated = 1; - drm_remove_magic(dev, auth->magic); + drm_remove_magic(file_priv->master, auth->magic); return 0; } return -EINVAL; diff --git a/linux-core/drm_bo.c b/linux-core/drm_bo.c index 3abbb8c4..2e0d1243 100644 --- a/linux-core/drm_bo.c +++ b/linux-core/drm_bo.c @@ -624,7 +624,6 @@ void drm_putback_buffer_objects(struct drm_device *dev) } EXPORT_SYMBOL(drm_putback_buffer_objects); - /* * Note. The caller has to register (if applicable) * and deregister fence object usage. @@ -1766,7 +1765,7 @@ int drm_buffer_object_create(struct drm_device *dev, size += buffer_start & ~PAGE_MASK; num_pages = (size + PAGE_SIZE - 1) >> PAGE_SHIFT; if (num_pages == 0) { - DRM_ERROR("Illegal buffer object size.\n"); + DRM_ERROR("Illegal buffer object size %ld.\n", size); return -EINVAL; } @@ -2362,15 +2361,18 @@ int drm_bo_driver_finish(struct drm_device *dev) if (list_empty(&bm->unfenced)) DRM_DEBUG("Unfenced list was clean\n"); + if (bm->dummy_read_page) { #if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,15)) - ClearPageReserved(bm->dummy_read_page); + ClearPageReserved(bm->dummy_read_page); #endif - __free_page(bm->dummy_read_page); + __free_page(bm->dummy_read_page); + } out: mutex_unlock(&dev->struct_mutex); return ret; } +EXPORT_SYMBOL(drm_bo_driver_finish); /* * This function is intended to be called on drm driver load. @@ -2406,8 +2408,14 @@ int drm_bo_driver_init(struct drm_device *dev) * Other types need to be driver / IOCTL initialized. */ ret = drm_bo_init_mm(dev, DRM_BO_MEM_LOCAL, 0, 0, 1); - if (ret) + if (ret) { +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,15)) + ClearPageReserved(bm->dummy_read_page); +#endif + __free_page(bm->dummy_read_page); + bm->dummy_read_page = NULL; goto out_unlock; + } #if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) INIT_WORK(&bm->wq, &drm_bo_delayed_workqueue, dev); diff --git a/linux-core/drm_bo_move.c b/linux-core/drm_bo_move.c index 850be5a3..9147a475 100644 --- a/linux-core/drm_bo_move.c +++ b/linux-core/drm_bo_move.c @@ -146,6 +146,7 @@ void drm_mem_reg_iounmap(struct drm_device *dev, struct drm_bo_mem_reg *mem, if (virtual && (man->flags & _DRM_FLAG_NEEDS_IOREMAP)) iounmap(virtual); } +EXPORT_SYMBOL(drm_mem_reg_iounmap); static int drm_copy_io_page(void *dst, void *src, unsigned long page) { diff --git a/linux-core/drm_bufs.c b/linux-core/drm_bufs.c index 75c75c2f..e9052570 100644 --- a/linux-core/drm_bufs.c +++ b/linux-core/drm_bufs.c @@ -52,9 +52,9 @@ struct drm_map_list *drm_find_matching_map(struct drm_device *dev, drm_local_map { struct drm_map_list *entry; list_for_each_entry(entry, &dev->maplist, head) { - if (entry->map && map->type == entry->map->type && - ((entry->map->offset == map->offset) || - (map->type == _DRM_SHM && map->flags==_DRM_CONTAINS_LOCK))) { + if (entry->map && (entry->master == dev->primary->master) && (map->type == entry->map->type) && + ((entry->map->offset == map->offset) || + ((map->type == _DRM_SHM) && (map->flags&_DRM_CONTAINS_LOCK)))) { return entry; } } @@ -209,12 +209,12 @@ static int drm_addmap_core(struct drm_device *dev, unsigned int offset, map->offset = (unsigned long)map->handle; if (map->flags & _DRM_CONTAINS_LOCK) { /* Prevent a 2nd X Server from creating a 2nd lock */ - if (dev->lock.hw_lock != NULL) { + if (dev->primary->master->lock.hw_lock != NULL) { vfree(map->handle); drm_free(map, sizeof(*map), DRM_MEM_MAPS); return -EBUSY; } - dev->sigdata.lock = dev->lock.hw_lock = map->handle; /* Pointer to lock */ + dev->sigdata.lock = dev->primary->master->lock.hw_lock = map->handle; /* Pointer to lock */ } break; case _DRM_AGP: { @@ -318,6 +318,7 @@ static int drm_addmap_core(struct drm_device *dev, unsigned int offset, list->user_token = list->hash.key << PAGE_SHIFT; mutex_unlock(&dev->struct_mutex); + list->master = dev->primary->master; *maplist = list; return 0; } @@ -344,7 +345,7 @@ int drm_addmap_ioctl(struct drm_device *dev, void *data, struct drm_map_list *maplist; int err; - if (!(capable(CAP_SYS_ADMIN) || map->type == _DRM_AGP)) + if (!(capable(CAP_SYS_ADMIN) || map->type == _DRM_AGP || map->type == _DRM_SHM)) return -EPERM; err = drm_addmap_core(dev, map->offset, map->size, map->type, @@ -379,10 +380,12 @@ int drm_rmmap_locked(struct drm_device *dev, drm_local_map_t *map) struct drm_map_list *r_list = NULL, *list_t; drm_dma_handle_t dmah; int found = 0; + struct drm_master *master; /* Find the list entry for the map and remove it */ list_for_each_entry_safe(r_list, list_t, &dev->maplist, head) { if (r_list->map == map) { + master = r_list->master; list_del(&r_list->head); drm_ht_remove_key(&dev->map_hash, r_list->user_token >> PAGE_SHIFT); @@ -412,6 +415,13 @@ int drm_rmmap_locked(struct drm_device *dev, drm_local_map_t *map) break; case _DRM_SHM: vfree(map->handle); + if (master) { + if (dev->sigdata.lock == master->lock.hw_lock) + dev->sigdata.lock = NULL; + master->lock.hw_lock = NULL; /* SHM removed */ + master->lock.file_priv = NULL; + wake_up_interruptible(&master->lock.lock_queue); + } break; case _DRM_AGP: case _DRM_SCATTER_GATHER: diff --git a/linux-core/drm_compat.c b/linux-core/drm_compat.c index 3d082e7e..dbb31578 100644 --- a/linux-core/drm_compat.c +++ b/linux-core/drm_compat.c @@ -217,7 +217,7 @@ static struct page *drm_bo_vm_fault(struct vm_area_struct *vma, mutex_lock(&bo->mutex); - err = drm_bo_wait(bo, 0, 1, 0); + err = drm_bo_wait(bo, 0, 1, 0, 1); if (err) { data->type = (err == -EAGAIN) ? VM_FAULT_MINOR : VM_FAULT_SIGBUS; @@ -730,6 +730,56 @@ void *idr_replace(struct idr *idp, void *ptr, int id) EXPORT_SYMBOL(idr_replace); #endif +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19)) +static __inline__ unsigned long __round_jiffies(unsigned long j, int cpu) +{ + int rem; + unsigned long original = j; + + j += cpu * 3; + + rem = j % HZ; + + if (rem < HZ/4) /* round down */ + j = j - rem; + else /* round up */ + j = j - rem + HZ; + + /* now that we have rounded, subtract the extra skew again */ + j -= cpu * 3; + + if (j <= jiffies) /* rounding ate our timeout entirely; */ + return original; + return j; +} + +static __inline__ unsigned long __round_jiffies_relative(unsigned long j, int cpu) +{ + return __round_jiffies(j + jiffies, cpu) - jiffies; +} + +unsigned long round_jiffies_relative(unsigned long j) +{ + return __round_jiffies_relative(j, raw_smp_processor_id()); +} +EXPORT_SYMBOL(round_jiffies_relative); +#endif + +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19)) +struct pci_dev * pci_get_bus_and_slot(unsigned int bus, unsigned int devfn) +{ + struct pci_dev *dev = NULL; + + while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { + if (pci_domain_nr(dev->bus) == 0 && + (dev->bus->number == bus && dev->devfn == devfn)) + return dev; + } + return NULL; +} +EXPORT_SYMBOL(pci_get_bus_and_slot); +#endif + #if defined(DRM_KMAP_ATOMIC_PROT_PFN) #define drm_kmap_get_fixmap_pte(vaddr) \ pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(vaddr), vaddr), (vaddr)), (vaddr)) @@ -756,6 +806,5 @@ void *kmap_atomic_prot_pfn(unsigned long pfn, enum km_type type, } EXPORT_SYMBOL(kmap_atomic_prot_pfn); - #endif diff --git a/linux-core/drm_compat.h b/linux-core/drm_compat.h index 30834f33..f35821bd 100644 --- a/linux-core/drm_compat.h +++ b/linux-core/drm_compat.h @@ -60,6 +60,13 @@ #if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19)) #undef DRM_IRQ_ARGS #define DRM_IRQ_ARGS int irq, void *arg, struct pt_regs *regs + +typedef _Bool bool; +enum { + false = 0, + true = 1 +}; + #endif #ifndef list_for_each_safe @@ -152,7 +159,7 @@ static __inline__ void *kcalloc(size_t nmemb, size_t size, int flags) #if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18) #define vmalloc_user(_size) ({void * tmp = vmalloc(_size); \ - if (tmp) memset(tmp, 0, size); \ + if (tmp) memset(tmp, 0, _size); \ (tmp);}) #endif @@ -325,7 +332,24 @@ void *idr_replace(struct idr *idp, void *ptr, int id); #endif #if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19)) -typedef _Bool bool; +extern unsigned long round_jiffies_relative(unsigned long j); +#endif + +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19)) +extern struct pci_dev * pci_get_bus_and_slot(unsigned int bus, unsigned int devfn); +#endif + +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19)) +static inline int kobject_uevent_env(struct kobject *kobj, + enum kobject_action action, + char *envp[]) +{ + return 0; +} +#endif + +#ifndef PM_EVENT_PRETHAW +#define PM_EVENT_PRETHAW 3 #endif diff --git a/linux-core/drm_context.c b/linux-core/drm_context.c index 83ad291e..f3d69ff7 100644 --- a/linux-core/drm_context.c +++ b/linux-core/drm_context.c @@ -257,12 +257,13 @@ static int drm_context_switch(struct drm_device *dev, int old, int new) * hardware lock is held, clears the drm_device::context_flag and wakes up * drm_device::context_wait. */ -static int drm_context_switch_complete(struct drm_device *dev, int new) +static int drm_context_switch_complete(struct drm_device *dev, + struct drm_file *file_priv, int new) { dev->last_context = new; /* PRE/POST: This is the _only_ writer. */ dev->last_switch = jiffies; - if (!_DRM_LOCK_IS_HELD(dev->lock.hw_lock->lock)) { + if (!_DRM_LOCK_IS_HELD(file_priv->master->lock.hw_lock->lock)) { DRM_ERROR("Lock isn't held after context switch\n"); } @@ -421,7 +422,7 @@ int drm_newctx(struct drm_device *dev, void *data, struct drm_ctx *ctx = data; DRM_DEBUG("%d\n", ctx->handle); - drm_context_switch_complete(dev, ctx->handle); + drm_context_switch_complete(dev, file_priv, ctx->handle); return 0; } @@ -443,9 +444,6 @@ int drm_rmctx(struct drm_device *dev, void *data, struct drm_ctx *ctx = data; DRM_DEBUG("%d\n", ctx->handle); - if (ctx->handle == DRM_KERNEL_CONTEXT + 1) { - file_priv->remove_auth_on_close = 1; - } if (ctx->handle != DRM_KERNEL_CONTEXT) { if (dev->driver->context_dtor) dev->driver->context_dtor(dev, ctx->handle); diff --git a/linux-core/drm_crtc.c b/linux-core/drm_crtc.c new file mode 100644 index 00000000..e1b371cc --- /dev/null +++ b/linux-core/drm_crtc.c @@ -0,0 +1,2209 @@ +/* + * Copyright (c) 2006-2007 Intel Corporation + * Copyright (c) 2007 Dave Airlie <airlied@linux.ie> + * Copyright (c) 2008 Red Hat Inc. + * + * DRM core CRTC related functions + * + * Permission to use, copy, modify, distribute, and sell this software and its + * documentation for any purpose is hereby granted without fee, provided that + * the above copyright notice appear in all copies and that both that copyright + * notice and this permission notice appear in supporting documentation, and + * that the name of the copyright holders not be used in advertising or + * publicity pertaining to distribution of the software without specific, + * written prior permission. The copyright holders make no representations + * about the suitability of this software for any purpose. It is provided "as + * is" without express or implied warranty. + * + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + * + * Authors: + * Keith Packard + * Eric Anholt <eric@anholt.net> + * Dave Airlie <airlied@linux.ie> + * Jesse Barnes <jesse.barnes@intel.com> + */ +#include <linux/list.h> +#include "drm.h" +#include "drmP.h" +#include "drm_crtc.h" + +struct drm_prop_enum_list { + int type; + char *name; +}; + +/* + * Global properties + */ +static struct drm_prop_enum_list drm_dpms_enum_list[] = +{ { DPMSModeOn, "On" }, + { DPMSModeStandby, "Standby" }, + { DPMSModeSuspend, "Suspend" }, + { DPMSModeOff, "Off" } +}; + +char *drm_get_dpms_name(int val) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(drm_dpms_enum_list); i++) + if (drm_dpms_enum_list[i].type == val) + return drm_dpms_enum_list[i].name; + + return "unknown"; +} + +static struct drm_prop_enum_list drm_connector_enum_list[] = +{ { DRM_MODE_CONNECTOR_Unknown, "Unknown" }, + { DRM_MODE_CONNECTOR_VGA, "VGA" }, + { DRM_MODE_CONNECTOR_DVII, "DVI-I" }, + { DRM_MODE_CONNECTOR_DVID, "DVI-D" }, + { DRM_MODE_CONNECTOR_DVIA, "DVI-A" }, + { DRM_MODE_CONNECTOR_Composite, "Composite" }, + { DRM_MODE_CONNECTOR_SVIDEO, "SVIDEO" }, + { DRM_MODE_CONNECTOR_LVDS, "LVDS" }, + { DRM_MODE_CONNECTOR_Component, "Component" }, + { DRM_MODE_CONNECTOR_9PinDIN, "9-pin DIN" }, + { DRM_MODE_CONNECTOR_DisplayPort, "DisplayPort" }, + { DRM_MODE_CONNECTOR_HDMIA, "HDMI Type A" }, + { DRM_MODE_CONNECTOR_HDMIB, "HDMI Type B" }, +}; +static struct drm_prop_enum_list drm_encoder_enum_list[] = +{ { DRM_MODE_ENCODER_NONE, "None" }, + { DRM_MODE_ENCODER_DAC, "DAC" }, + { DRM_MODE_ENCODER_TMDS, "TMDS" }, + { DRM_MODE_ENCODER_LVDS, "LVDS" }, + { DRM_MODE_ENCODER_TVDAC, "TV" }, +}; + +char *drm_get_encoder_name(struct drm_encoder *encoder) +{ + static char buf[32]; + + snprintf(buf, 32, "%s-%d", drm_encoder_enum_list[encoder->encoder_type].name, + encoder->base.id); + return buf; +} + +char *drm_get_connector_name(struct drm_connector *connector) +{ + static char buf[32]; + + snprintf(buf, 32, "%s-%d", drm_connector_enum_list[connector->connector_type].name, + connector->connector_type_id); + return buf; +} + +char *drm_get_connector_status_name(enum drm_connector_status status) +{ + if (status == connector_status_connected) + return "connected"; + else if (status == connector_status_disconnected) + return "disconnected"; + else + return "unknown"; +} + +/** + * drm_idr_get - allocate a new identifier + * @dev: DRM device + * @ptr: object pointer, used to generate unique ID + * + * LOCKING: + * Caller must hold DRM mode_config lock. + * + * Create a unique identifier based on @ptr in @dev's identifier space. Used + * for tracking modes, CRTCs and connectors. + * + * RETURNS: + * New unique (relative to other objects in @dev) integer identifier for the + * object. + */ +static int drm_mode_object_get(struct drm_device *dev, struct drm_mode_object *obj, uint32_t obj_type) +{ + int new_id = 0; + int ret; +again: + if (idr_pre_get(&dev->mode_config.crtc_idr, GFP_KERNEL) == 0) { + DRM_ERROR("Ran out memory getting a mode number\n"); + return -EINVAL; + } + + ret = idr_get_new_above(&dev->mode_config.crtc_idr, obj, 1, &new_id); + if (ret == -EAGAIN) + goto again; + + obj->id = new_id; + obj->type = obj_type; + return 0; +} + +/** + * drm_mode_object_put - free an identifer + * @dev: DRM device + * @id: ID to free + * + * LOCKING: + * Caller must hold DRM mode_config lock. + * + * Free @id from @dev's unique identifier pool. + */ +static void drm_mode_object_put(struct drm_device *dev, struct drm_mode_object *object) +{ + idr_remove(&dev->mode_config.crtc_idr, object->id); +} + +static void *drm_mode_object_find(struct drm_device *dev, uint32_t id, uint32_t type) +{ + struct drm_mode_object *obj; + + obj = idr_find(&dev->mode_config.crtc_idr, id); + if (!obj || (obj->type != type) || (obj->id != id)) + return NULL; + + return obj; +} + +/** + * drm_crtc_from_fb - find the CRTC structure associated with an fb + * @dev: DRM device + * @fb: framebuffer in question + * + * LOCKING: + * Caller must hold mode_config lock. + * + * Find CRTC in the mode_config structure that matches @fb. + * + * RETURNS: + * Pointer to the CRTC or NULL if it wasn't found. + */ +struct drm_crtc *drm_crtc_from_fb(struct drm_device *dev, + struct drm_framebuffer *fb) +{ + struct drm_crtc *crtc; + + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { + if (crtc->fb == fb) + return crtc; + } + return NULL; +} + +/** + * drm_framebuffer_create - create a new framebuffer object + * @dev: DRM device + * + * LOCKING: + * Caller must hold mode config lock. + * + * Creates a new framebuffer objects and adds it to @dev's DRM mode_config. + * + * RETURNS: + * Pointer to new framebuffer or NULL on error. + */ +struct drm_framebuffer *drm_framebuffer_init(struct drm_device *dev, struct drm_framebuffer *fb, + const struct drm_framebuffer_funcs *funcs) +{ + drm_mode_object_get(dev, &fb->base, DRM_MODE_OBJECT_FB); + fb->dev = dev; + fb->funcs = funcs; + dev->mode_config.num_fb++; + list_add(&fb->head, &dev->mode_config.fb_list); + + return fb; +} +EXPORT_SYMBOL(drm_framebuffer_init); + +/** + * drm_framebuffer_cleanup - remove a framebuffer object + * @fb: framebuffer to remove + * + * LOCKING: + * Caller must hold mode config lock. + * + * Scans all the CRTCs in @dev's mode_config. If they're using @fb, removes + * it, setting it to NULL. + */ +void drm_framebuffer_cleanup(struct drm_framebuffer *fb) +{ + struct drm_device *dev = fb->dev; + struct drm_crtc *crtc; + + /* remove from any CRTC */ + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { + if (crtc->fb == fb) + crtc->fb = NULL; + } + + drm_mode_object_put(dev, &fb->base); + list_del(&fb->head); + dev->mode_config.num_fb--; +} +EXPORT_SYMBOL(drm_framebuffer_cleanup); + +/** + * drm_crtc_init - Initialise a new CRTC object + * @dev: DRM device + * @crtc: CRTC object to init + * @funcs: callbacks for the new CRTC + * + * LOCKING: + * Caller must hold mode config lock. + * + * Inits a new object created as base part of an driver crtc object. + */ +void drm_crtc_init(struct drm_device *dev, struct drm_crtc *crtc, + const struct drm_crtc_funcs *funcs) +{ + crtc->dev = dev; + crtc->funcs = funcs; + + drm_mode_object_get(dev, &crtc->base, DRM_MODE_OBJECT_CRTC); + + list_add_tail(&crtc->head, &dev->mode_config.crtc_list); + dev->mode_config.num_crtc++; +} +EXPORT_SYMBOL(drm_crtc_init); + +/** + * drm_crtc_cleanup - Cleans up the core crtc usage. + * @crtc: CRTC to cleanup + * + * LOCKING: + * Caller must hold mode config lock. + * + * Cleanup @crtc. Removes from drm modesetting space + * does NOT free object, caller does that. + */ +void drm_crtc_cleanup(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + + if (crtc->gamma_store) { + kfree(crtc->gamma_store); + crtc->gamma_store = NULL; + } + + drm_mode_object_put(dev, &crtc->base); + list_del(&crtc->head); + dev->mode_config.num_crtc--; +} +EXPORT_SYMBOL(drm_crtc_cleanup); + +/** + * drm_mode_probed_add - add a mode to the specified connector's probed mode list + * @connector: connector the new mode + * @mode: mode data + * + * LOCKING: + * Caller must hold mode config lock. + * + * Add @mode to @connector's mode list for later use. + */ +void drm_mode_probed_add(struct drm_connector *connector, + struct drm_display_mode *mode) +{ + list_add(&mode->head, &connector->probed_modes); +} +EXPORT_SYMBOL(drm_mode_probed_add); + +/** + * drm_mode_remove - remove and free a mode + * @connector: connector list to modify + * @mode: mode to remove + * + * LOCKING: + * Caller must hold mode config lock. + * + * Remove @mode from @connector's mode list, then free it. + */ +void drm_mode_remove(struct drm_connector *connector, struct drm_display_mode *mode) +{ + list_del(&mode->head); + kfree(mode); +} +EXPORT_SYMBOL(drm_mode_remove); + +/** + * drm_connector_init - Init a preallocated connector + * @dev: DRM device + * @connector: the connector to init + * @funcs: callbacks for this connector + * @name: user visible name of the connector + * + * LOCKING: + * Caller must hold @dev's mode_config lock. + * + * Initialises a preallocated connector. Connectors should be + * subclassed as part of driver connector objects. + */ +void drm_connector_init(struct drm_device *dev, + struct drm_connector *connector, + const struct drm_connector_funcs *funcs, + int connector_type) +{ + connector->dev = dev; + connector->funcs = funcs; + drm_mode_object_get(dev, &connector->base, DRM_MODE_OBJECT_CONNECTOR); + connector->connector_type = connector_type; + connector->connector_type_id = 1; /* TODO */ + INIT_LIST_HEAD(&connector->user_modes); + INIT_LIST_HEAD(&connector->probed_modes); + INIT_LIST_HEAD(&connector->modes); + connector->edid_blob_ptr = NULL; + /* randr_connector? */ + /* connector_set_monitor(connector)? */ + /* check for connector_ignored(connector)? */ + + mutex_lock(&dev->mode_config.mutex); + list_add_tail(&connector->head, &dev->mode_config.connector_list); + dev->mode_config.num_connector++; + + drm_connector_attach_property(connector, dev->mode_config.edid_property, 0); + + drm_connector_attach_property(connector, dev->mode_config.dpms_property, 0); + + mutex_unlock(&dev->mode_config.mutex); +} +EXPORT_SYMBOL(drm_connector_init); + +/** + * drm_connector_cleanup - cleans up an initialised connector + * @connector: connector to cleanup + * + * LOCKING: + * Caller must hold @dev's mode_config lock. + * + * Cleans up the connector but doesn't free the object. + */ +void drm_connector_cleanup(struct drm_connector *connector) +{ + struct drm_device *dev = connector->dev; + struct drm_display_mode *mode, *t; + + list_for_each_entry_safe(mode, t, &connector->probed_modes, head) + drm_mode_remove(connector, mode); + + list_for_each_entry_safe(mode, t, &connector->modes, head) + drm_mode_remove(connector, mode); + + list_for_each_entry_safe(mode, t, &connector->user_modes, head) + drm_mode_remove(connector, mode); + + mutex_lock(&dev->mode_config.mutex); + drm_mode_object_put(dev, &connector->base); + list_del(&connector->head); + mutex_unlock(&dev->mode_config.mutex); +} +EXPORT_SYMBOL(drm_connector_cleanup); + +void drm_encoder_init(struct drm_device *dev, + struct drm_encoder *encoder, + const struct drm_encoder_funcs *funcs, + int encoder_type) +{ + encoder->dev = dev; + + drm_mode_object_get(dev, &encoder->base, DRM_MODE_OBJECT_ENCODER); + encoder->encoder_type = encoder_type; + encoder->funcs = funcs; + + mutex_lock(&dev->mode_config.mutex); + list_add_tail(&encoder->head, &dev->mode_config.encoder_list); + dev->mode_config.num_encoder++; + + mutex_unlock(&dev->mode_config.mutex); +} +EXPORT_SYMBOL(drm_encoder_init); + +void drm_encoder_cleanup(struct drm_encoder *encoder) +{ + struct drm_device *dev = encoder->dev; + mutex_lock(&dev->mode_config.mutex); + drm_mode_object_put(dev, &encoder->base); + list_del(&encoder->head); + mutex_unlock(&dev->mode_config.mutex); +} +EXPORT_SYMBOL(drm_encoder_cleanup); + +/** + * drm_mode_create - create a new display mode + * @dev: DRM device + * + * LOCKING: + * None. + * + * Create a new drm_display_mode, give it an ID, and return it. + * + * RETURNS: + * Pointer to new mode on success, NULL on error. + */ +struct drm_display_mode *drm_mode_create(struct drm_device *dev) +{ + struct drm_display_mode *nmode; + + nmode = kzalloc(sizeof(struct drm_display_mode), GFP_KERNEL); + if (!nmode) + return NULL; + + drm_mode_object_get(dev, &nmode->base, DRM_MODE_OBJECT_MODE); + return nmode; +} +EXPORT_SYMBOL(drm_mode_create); + +/** + * drm_mode_destroy - remove a mode + * @dev: DRM device + * @mode: mode to remove + * + * LOCKING: + * Caller must hold mode config lock. + * + * Free @mode's unique identifier, then free it. + */ +void drm_mode_destroy(struct drm_device *dev, struct drm_display_mode *mode) +{ + drm_mode_object_put(dev, &mode->base); + + kfree(mode); +} +EXPORT_SYMBOL(drm_mode_destroy); + +static int drm_mode_create_standard_connector_properties(struct drm_device *dev) +{ + int i; + + /* + * Standard properties (apply to all connectors) + */ + dev->mode_config.edid_property = + drm_property_create(dev, DRM_MODE_PROP_BLOB | DRM_MODE_PROP_IMMUTABLE, + "EDID", 0); + + dev->mode_config.dpms_property = + drm_property_create(dev, DRM_MODE_PROP_ENUM, + "DPMS", ARRAY_SIZE(drm_dpms_enum_list)); + for (i = 0; i < ARRAY_SIZE(drm_dpms_enum_list); i++) + drm_property_add_enum(dev->mode_config.dpms_property, i, drm_dpms_enum_list[i].type, drm_dpms_enum_list[i].name); + + return 0; +} + +/** + * drm_create_tv_properties - create TV specific connector properties + * @dev: DRM device + * @num_modes: number of different TV formats (modes) supported + * @modes: array of pointers to strings containing name of each format + * + * Called by a driver's TV initialization routine, this function creates + * the TV specific connector properties for a given device. Caller is + * responsible for allocating a list of format names and passing them to + * this routine. + */ +bool drm_create_tv_properties(struct drm_device *dev, int num_modes, + char *modes[]) +{ + int i; + + dev->mode_config.tv_left_margin_property = + drm_property_create(dev, DRM_MODE_PROP_RANGE | + DRM_MODE_PROP_IMMUTABLE, + "left margin", 2); + dev->mode_config.tv_left_margin_property->values[0] = 0; + dev->mode_config.tv_left_margin_property->values[1] = 100; + + dev->mode_config.tv_right_margin_property = + drm_property_create(dev, DRM_MODE_PROP_RANGE, + "right margin", 2); + dev->mode_config.tv_right_margin_property->values[0] = 0; + dev->mode_config.tv_right_margin_property->values[1] = 100; + + dev->mode_config.tv_top_margin_property = + drm_property_create(dev, DRM_MODE_PROP_RANGE, + "top margin", 2); + dev->mode_config.tv_top_margin_property->values[0] = 0; + dev->mode_config.tv_top_margin_property->values[1] = 100; + + dev->mode_config.tv_bottom_margin_property = + drm_property_create(dev, DRM_MODE_PROP_RANGE, + "bottom margin", 2); + dev->mode_config.tv_bottom_margin_property->values[0] = 0; + dev->mode_config.tv_bottom_margin_property->values[1] = 100; + + dev->mode_config.tv_mode_property = + drm_property_create(dev, DRM_MODE_PROP_ENUM, + "mode", num_modes); + for (i = 0; i < num_modes; i++) + drm_property_add_enum(dev->mode_config.tv_mode_property, i, + i, modes[i]); + + return 0; +} +EXPORT_SYMBOL(drm_create_tv_properties); + +/** + * drm_mode_config_init - initialize DRM mode_configuration structure + * @dev: DRM device + * + * LOCKING: + * None, should happen single threaded at init time. + * + * Initialize @dev's mode_config structure, used for tracking the graphics + * configuration of @dev. + */ +void drm_mode_config_init(struct drm_device *dev) +{ + mutex_init(&dev->mode_config.mutex); + INIT_LIST_HEAD(&dev->mode_config.fb_list); + INIT_LIST_HEAD(&dev->mode_config.fb_kernel_list); + INIT_LIST_HEAD(&dev->mode_config.crtc_list); + INIT_LIST_HEAD(&dev->mode_config.connector_list); + INIT_LIST_HEAD(&dev->mode_config.encoder_list); + INIT_LIST_HEAD(&dev->mode_config.property_list); + INIT_LIST_HEAD(&dev->mode_config.property_blob_list); + idr_init(&dev->mode_config.crtc_idr); + + drm_mode_create_standard_connector_properties(dev); + + /* Just to be sure */ + dev->mode_config.current_generation = 0; + dev->mode_config.num_fb = 0; + dev->mode_config.num_connector = 0; + dev->mode_config.num_crtc = 0; + dev->mode_config.num_encoder = 0; + dev->mode_config.hotplug_counter = 0; +} +EXPORT_SYMBOL(drm_mode_config_init); + +int drm_mode_group_init(struct drm_device *dev, struct drm_mode_group *group) +{ + uint32_t total_objects = 0; + + total_objects += dev->mode_config.num_crtc; + total_objects += dev->mode_config.num_connector; + total_objects += dev->mode_config.num_encoder; + + group->id_list = kzalloc(total_objects * sizeof(uint32_t), GFP_KERNEL); + if (!group->id_list) + return -ENOMEM; + + group->num_crtcs = 0; + group->num_connectors = 0; + group->num_encoders = 0; + return 0; +} + +int drm_mode_group_init_legacy_group(struct drm_device *dev, struct drm_mode_group *group) +{ + struct drm_crtc *crtc; + struct drm_encoder *encoder; + struct drm_connector *connector; + + if (drm_mode_group_init(dev, group)) + return -ENOMEM; + + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) + group->id_list[group->num_crtcs++] = crtc->base.id; + + list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) + group->id_list[group->num_crtcs + group->num_encoders++] = encoder->base.id; + + list_for_each_entry(connector, &dev->mode_config.connector_list, head) + group->id_list[group->num_crtcs + group->num_encoders + group->num_connectors++] = connector->base.id; + + return 0; +} + +/** + * drm_mode_config_cleanup - free up DRM mode_config info + * @dev: DRM device + * + * LOCKING: + * Caller must hold mode config lock. + * + * Free up all the connectors and CRTCs associated with this DRM device, then + * free up the framebuffers and associated buffer objects. + * + * FIXME: cleanup any dangling user buffer objects too + */ +void drm_mode_config_cleanup(struct drm_device *dev) +{ + struct drm_connector *connector, *ot; + struct drm_crtc *crtc, *ct; + struct drm_encoder *encoder, *enct; + struct drm_framebuffer *fb, *fbt; + struct drm_property *property, *pt; + + list_for_each_entry_safe(encoder, enct, &dev->mode_config.encoder_list, head) { + encoder->funcs->destroy(encoder); + } + + list_for_each_entry_safe(connector, ot, &dev->mode_config.connector_list, head) { + connector->funcs->destroy(connector); + } + + list_for_each_entry_safe(property, pt, &dev->mode_config.property_list, head) { + drm_property_destroy(dev, property); + } + + list_for_each_entry_safe(fb, fbt, &dev->mode_config.fb_list, head) { + fb->funcs->destroy(fb); + } + + list_for_each_entry_safe(crtc, ct, &dev->mode_config.crtc_list, head) { + crtc->funcs->destroy(crtc); + } + +} +EXPORT_SYMBOL(drm_mode_config_cleanup); + +int drm_mode_hotplug_ioctl(struct drm_device *dev, + void *data, struct drm_file *file_priv) +{ + struct drm_mode_hotplug *arg = data; + + arg->counter = dev->mode_config.hotplug_counter; + + return 0; +} + +/** + * drm_crtc_convert_to_umode - convert a drm_display_mode into a modeinfo + * @out: drm_mode_modeinfo struct to return to the user + * @in: drm_display_mode to use + * + * LOCKING: + * None. + * + * Convert a drm_display_mode into a drm_mode_modeinfo structure to return to + * the user. + */ +void drm_crtc_convert_to_umode(struct drm_mode_modeinfo *out, struct drm_display_mode *in) +{ + out->clock = in->clock; + out->hdisplay = in->hdisplay; + out->hsync_start = in->hsync_start; + out->hsync_end = in->hsync_end; + out->htotal = in->htotal; + out->hskew = in->hskew; + out->vdisplay = in->vdisplay; + out->vsync_start = in->vsync_start; + out->vsync_end = in->vsync_end; + out->vtotal = in->vtotal; + out->vscan = in->vscan; + out->vrefresh = in->vrefresh; + out->flags = in->flags; + out->type = in->type; + strncpy(out->name, in->name, DRM_DISPLAY_MODE_LEN); + out->name[DRM_DISPLAY_MODE_LEN-1] = 0; +} + +/** + * drm_crtc_convert_to_umode - convert a modeinfo into a drm_display_mode + * @out: drm_display_mode to return to the user + * @in: drm_mode_modeinfo to use + * + * LOCKING: + * None. + * + * Convert a drmo_mode_modeinfo into a drm_display_mode structure to return to + * the caller. + */ +void drm_crtc_convert_umode(struct drm_display_mode *out, struct drm_mode_modeinfo *in) +{ + out->clock = in->clock; + out->hdisplay = in->hdisplay; + out->hsync_start = in->hsync_start; + out->hsync_end = in->hsync_end; + out->htotal = in->htotal; + out->hskew = in->hskew; + out->vdisplay = in->vdisplay; + out->vsync_start = in->vsync_start; + out->vsync_end = in->vsync_end; + out->vtotal = in->vtotal; + out->vscan = in->vscan; + out->vrefresh = in->vrefresh; + out->flags = in->flags; + out->type = in->type; + strncpy(out->name, in->name, DRM_DISPLAY_MODE_LEN); + out->name[DRM_DISPLAY_MODE_LEN-1] = 0; +} + +/** + * drm_mode_getresources - get graphics configuration + * @inode: inode from the ioctl + * @filp: file * from the ioctl + * @cmd: cmd from ioctl + * @arg: arg from ioctl + * + * LOCKING: + * Takes mode config lock. + * + * Construct a set of configuration description structures and return + * them to the user, including CRTC, connector and framebuffer configuration. + * + * Called by the user via ioctl. + * + * RETURNS: + * Zero on success, errno on failure. + */ +int drm_mode_getresources(struct drm_device *dev, + void *data, struct drm_file *file_priv) +{ + struct drm_mode_card_res *card_res = data; + struct list_head *lh; + struct drm_framebuffer *fb; + struct drm_connector *connector; + struct drm_crtc *crtc; + struct drm_encoder *encoder; + int ret = 0; + int connector_count = 0; + int crtc_count = 0; + int fb_count = 0; + int encoder_count = 0; + int copied = 0, i; + uint32_t __user *fb_id; + uint32_t __user *crtc_id; + uint32_t __user *connector_id; + uint32_t __user *encoder_id; + struct drm_mode_group *mode_group; + + mutex_lock(&dev->mode_config.mutex); + + /* for the non-control nodes we need to limit the list of resources by IDs in the + group list for this node */ + list_for_each(lh, &file_priv->fbs) + fb_count++; + + mode_group = &file_priv->master->minor->mode_group; + if (file_priv->master->minor->type == DRM_MINOR_CONTROL) { + + list_for_each(lh, &dev->mode_config.crtc_list) + crtc_count++; + + list_for_each(lh, &dev->mode_config.connector_list) + connector_count++; + + list_for_each(lh, &dev->mode_config.encoder_list) + encoder_count++; + } else { + + crtc_count = mode_group->num_crtcs; + connector_count = mode_group->num_connectors; + encoder_count = mode_group->num_encoders; + } + + card_res->max_height = dev->mode_config.max_height; + card_res->min_height = dev->mode_config.min_height; + card_res->max_width = dev->mode_config.max_width; + card_res->min_width = dev->mode_config.min_width; + card_res->generation = dev->mode_config.current_generation; + + /* handle this in 4 parts */ + /* FBs */ + if (card_res->count_fbs >= fb_count) { + copied = 0; + fb_id = (uint32_t *)(unsigned long)card_res->fb_id_ptr; + list_for_each_entry(fb, &file_priv->fbs, head) { + if (put_user(fb->base.id, fb_id + copied)) { + ret = -EFAULT; + goto out; + } + copied++; + } + } + card_res->count_fbs = fb_count; + + /* CRTCs */ + if (card_res->count_crtcs >= crtc_count) { + copied = 0; + crtc_id = (uint32_t *)(unsigned long)card_res->crtc_id_ptr; + if (file_priv->master->minor->type == DRM_MINOR_CONTROL) { + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { + DRM_DEBUG("CRTC ID is %d\n", crtc->base.id); + if (put_user(crtc->base.id, crtc_id + copied)) { + ret = -EFAULT; + goto out; + } + copied++; + } + } else { + for (i = 0; i < mode_group->num_crtcs; i++) { + if (put_user(mode_group->id_list[i], crtc_id + copied)) { + ret = -EFAULT; + goto out; + } + copied++; + } + } + } + card_res->count_crtcs = crtc_count; + + /* Encoders */ + if (card_res->count_encoders >= encoder_count) { + copied = 0; + encoder_id = (uint32_t *)(unsigned long)card_res->encoder_id_ptr; + if (file_priv->master->minor->type == DRM_MINOR_CONTROL) { + list_for_each_entry(encoder, &dev->mode_config.encoder_list, + head) { + DRM_DEBUG("ENCODER ID is %d\n", encoder->base.id); + if (put_user(encoder->base.id, encoder_id + copied)) { + ret = -EFAULT; + goto out; + } + copied++; + } + } else { + for (i = mode_group->num_crtcs; i < mode_group->num_crtcs + mode_group->num_encoders; i++) { + if (put_user(mode_group->id_list[i], encoder_id + copied)) { + ret = -EFAULT; + goto out; + } + copied++; + } + + } + } + card_res->count_encoders = encoder_count; + + /* Connectors */ + if (card_res->count_connectors >= connector_count) { + copied = 0; + connector_id = (uint32_t *)(unsigned long)card_res->connector_id_ptr; + if (file_priv->master->minor->type == DRM_MINOR_CONTROL) { + list_for_each_entry(connector, &dev->mode_config.connector_list, + head) { + DRM_DEBUG("CONNECTOR ID is %d\n", connector->base.id); + if (put_user(connector->base.id, connector_id + copied)) { + ret = -EFAULT; + goto out; + } + copied++; + } + } else { + int start = mode_group->num_crtcs + mode_group->num_encoders; + for (i = start; i < start + mode_group->num_connectors; i++) { + if (put_user(mode_group->id_list[i], connector_id + copied)) { + ret = -EFAULT; + goto out; + } + copied++; + } + } + } + card_res->count_connectors = connector_count; + + + + DRM_DEBUG("Counted %d %d %d\n", card_res->count_crtcs, + card_res->count_connectors, card_res->count_encoders); + +out: + mutex_unlock(&dev->mode_config.mutex); + return ret; +} + +/** + * drm_mode_getcrtc - get CRTC configuration + * @inode: inode from the ioctl + * @filp: file * from the ioctl + * @cmd: cmd from ioctl + * @arg: arg from ioctl + * + * LOCKING: + * Caller? (FIXME) + * + * Construct a CRTC configuration structure to return to the user. + * + * Called by the user via ioctl. + * + * RETURNS: + * Zero on success, errno on failure. + */ +int drm_mode_getcrtc(struct drm_device *dev, + void *data, struct drm_file *file_priv) +{ + struct drm_mode_crtc *crtc_resp = data; + struct drm_crtc *crtc; + struct drm_mode_object *obj; + int ret = 0; + + mutex_lock(&dev->mode_config.mutex); + + obj = drm_mode_object_find(dev, crtc_resp->crtc_id, DRM_MODE_OBJECT_CRTC); + if (!obj) { + ret = -EINVAL; + goto out; + } + crtc = obj_to_crtc(obj); + + crtc_resp->x = crtc->x; + crtc_resp->y = crtc->y; + crtc_resp->gamma_size = crtc->gamma_size; + crtc_resp->generation = dev->mode_config.current_generation; + if (crtc->fb) + crtc_resp->fb_id = crtc->fb->base.id; + else + crtc_resp->fb_id = 0; + + crtc_resp->connectors = 0; + if (crtc->enabled) { + + drm_crtc_convert_to_umode(&crtc_resp->mode, &crtc->mode); + crtc_resp->mode_valid = 1; + + } else { + crtc_resp->mode_valid = 0; + } + +out: + mutex_unlock(&dev->mode_config.mutex); + return ret; +} + +/** + * drm_mode_getconnector - get connector configuration + * @inode: inode from the ioctl + * @filp: file * from the ioctl + * @cmd: cmd from ioctl + * @arg: arg from ioctl + * + * LOCKING: + * Caller? (FIXME) + * + * Construct a connector configuration structure to return to the user. + * + * Called by the user via ioctl. + * + * RETURNS: + * Zero on success, errno on failure. + */ +int drm_mode_getconnector(struct drm_device *dev, + void *data, struct drm_file *file_priv) +{ + struct drm_mode_get_connector *out_resp = data; + struct drm_mode_object *obj; + struct drm_connector *connector; + struct drm_display_mode *mode; + int mode_count = 0; + int props_count = 0; + int encoders_count = 0; + int ret = 0; + int copied = 0; + int i; + struct drm_mode_modeinfo u_mode; + struct drm_mode_modeinfo __user *mode_ptr; + uint32_t __user *prop_ptr; + uint64_t __user *prop_values; + uint32_t __user *encoder_ptr; + + memset(&u_mode, 0, sizeof(struct drm_mode_modeinfo)); + + DRM_DEBUG("connector id %d:\n", out_resp->connector); + + mutex_lock(&dev->mode_config.mutex); + + obj = drm_mode_object_find(dev, out_resp->connector, DRM_MODE_OBJECT_CONNECTOR); + if (!obj) { + ret = -EINVAL; + goto out; + } + connector = obj_to_connector(obj); + + list_for_each_entry(mode, &connector->modes, head) + mode_count++; + + for (i = 0; i < DRM_CONNECTOR_MAX_PROPERTY; i++) { + if (connector->property_ids[i] != 0) { + props_count++; + } + } + + for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) { + if (connector->encoder_ids[i] != 0) { + encoders_count++; + } + } + + if (out_resp->count_modes == 0) { + connector->funcs->fill_modes(connector, dev->mode_config.max_width, dev->mode_config.max_height); + } + + out_resp->generation = dev->mode_config.current_generation; + out_resp->connector_type = connector->connector_type; + out_resp->connector_type_id = connector->connector_type_id; + out_resp->mm_width = connector->display_info.width_mm; + out_resp->mm_height = connector->display_info.height_mm; + out_resp->subpixel = connector->display_info.subpixel_order; + out_resp->connection = connector->status; + if (connector->encoder) + out_resp->encoder = connector->encoder->base.id; + else + out_resp->encoder = 0; + + if ((out_resp->count_modes >= mode_count) && mode_count) { + copied = 0; + mode_ptr = (struct drm_mode_modeinfo *)(unsigned long)out_resp->modes_ptr; + list_for_each_entry(mode, &connector->modes, head) { + drm_crtc_convert_to_umode(&u_mode, mode); + if (copy_to_user(mode_ptr + copied, + &u_mode, sizeof(u_mode))) { + ret = -EFAULT; + goto out; + } + copied++; + + } + } + out_resp->count_modes = mode_count; + + if ((out_resp->count_props >= props_count) && props_count) { + copied = 0; + prop_ptr = (uint32_t *)(unsigned long)(out_resp->props_ptr); + prop_values = (uint64_t *)(unsigned long)(out_resp->prop_values_ptr); + for (i = 0; i < DRM_CONNECTOR_MAX_PROPERTY; i++) { + if (connector->property_ids[i] != 0) { + if (put_user(connector->property_ids[i], prop_ptr + copied)) { + ret = -EFAULT; + goto out; + } + + if (put_user(connector->property_values[i], prop_values + copied)) { + ret = -EFAULT; + goto out; + } + copied++; + } + } + } + out_resp->count_props = props_count; + + if ((out_resp->count_encoders >= encoders_count) && encoders_count) { + copied = 0; + encoder_ptr = (uint32_t *)(unsigned long)(out_resp->encoders_ptr); + for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) { + if (connector->encoder_ids[i] != 0) { + if (put_user(connector->encoder_ids[i], encoder_ptr + copied)) { + ret = -EFAULT; + goto out; + } + copied++; + } + } + } + out_resp->count_encoders = encoders_count; + +out: + mutex_unlock(&dev->mode_config.mutex); + return ret; +} + +int drm_mode_getencoder(struct drm_device *dev, + void *data, struct drm_file *file_priv) +{ + struct drm_mode_get_encoder *enc_resp = data; + struct drm_mode_object *obj; + struct drm_encoder *encoder; + int ret = 0; + + mutex_lock(&dev->mode_config.mutex); + obj = drm_mode_object_find(dev, enc_resp->encoder_id, DRM_MODE_OBJECT_ENCODER); + if (!obj) { + ret = -EINVAL; + goto out; + } + encoder = obj_to_encoder(obj); + + if (encoder->crtc) + enc_resp->crtc = encoder->crtc->base.id; + else + enc_resp->crtc = 0; + enc_resp->generation = dev->mode_config.current_generation; + enc_resp->encoder_type = encoder->encoder_type; + enc_resp->encoder_id = encoder->base.id; + enc_resp->crtcs = encoder->possible_crtcs; + enc_resp->clones = encoder->possible_clones; + +out: + mutex_unlock(&dev->mode_config.mutex); + return ret; +} + +/** + * drm_mode_setcrtc - set CRTC configuration + * @inode: inode from the ioctl + * @filp: file * from the ioctl + * @cmd: cmd from ioctl + * @arg: arg from ioctl + * + * LOCKING: + * Caller? (FIXME) + * + * Build a new CRTC configuration based on user request. + * + * Called by the user via ioctl. + * + * RETURNS: + * Zero on success, errno on failure. + */ +int drm_mode_setcrtc(struct drm_device *dev, + void *data, struct drm_file *file_priv) +{ + struct drm_mode_crtc *crtc_req = data; + struct drm_mode_object *obj; + struct drm_crtc *crtc, *crtcfb; + struct drm_connector **connector_set = NULL, *connector; + struct drm_framebuffer *fb = NULL; + struct drm_display_mode *mode = NULL; + struct drm_mode_set set; + uint32_t __user *set_connectors_ptr; + int ret = 0; + int i; + + mutex_lock(&dev->mode_config.mutex); + obj = drm_mode_object_find(dev, crtc_req->crtc_id, DRM_MODE_OBJECT_CRTC); + if (!obj) { + DRM_DEBUG("Unknown CRTC ID %d\n", crtc_req->crtc_id); + ret = -EINVAL; + goto out; + } + crtc = obj_to_crtc(obj); + + if (crtc_req->mode_valid) { + /* If we have a mode we need a framebuffer. */ + /* If we pass -1, set the mode with the currently bound fb */ + if (crtc_req->fb_id == -1) { + list_for_each_entry(crtcfb, &dev->mode_config.crtc_list, head) { + if (crtcfb == crtc) { + DRM_DEBUG("Using current fb for setmode\n"); + fb = crtc->fb; + } + } + } else { + obj = drm_mode_object_find(dev, crtc_req->fb_id, DRM_MODE_OBJECT_FB); + if (!obj) { + DRM_DEBUG("Unknown FB ID%d\n", crtc_req->fb_id); + ret = -EINVAL; + goto out; + } + fb = obj_to_fb(obj); + } + + mode = drm_mode_create(dev); + drm_crtc_convert_umode(mode, &crtc_req->mode); + drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V); + } + + if (crtc_req->count_connectors == 0 && mode) { + DRM_DEBUG("Count connectors is 0 but mode set\n"); + ret = -EINVAL; + goto out; + } + + if (crtc_req->count_connectors > 0 && !mode && !fb) { + DRM_DEBUG("Count connectors is %d but no mode or fb set\n", crtc_req->count_connectors); + ret = -EINVAL; + goto out; + } + + if (crtc_req->count_connectors > 0) { + u32 out_id; + /* Maybe we should check that count_connectors is a sensible value. */ + connector_set = kmalloc(crtc_req->count_connectors * + sizeof(struct drm_connector *), GFP_KERNEL); + if (!connector_set) { + ret = -ENOMEM; + goto out; + } + + for (i = 0; i < crtc_req->count_connectors; i++) { + set_connectors_ptr = (uint32_t *)(unsigned long)crtc_req->set_connectors_ptr; + if (get_user(out_id, &set_connectors_ptr[i])) { + ret = -EFAULT; + goto out; + } + + obj = drm_mode_object_find(dev, out_id, DRM_MODE_OBJECT_CONNECTOR); + if (!obj) { + DRM_DEBUG("Connector id %d unknown\n", out_id); + ret = -EINVAL; + goto out; + } + connector = obj_to_connector(obj); + + connector_set[i] = connector; + } + } + + set.crtc = crtc; + set.x = crtc_req->x; + set.y = crtc_req->y; + set.mode = mode; + set.connectors = connector_set; + set.num_connectors = crtc_req->count_connectors; + set.fb =fb; + ret = crtc->funcs->set_config(&set); + +out: + kfree(connector_set); + mutex_unlock(&dev->mode_config.mutex); + return ret; +} + +int drm_mode_cursor_ioctl(struct drm_device *dev, + void *data, struct drm_file *file_priv) +{ + struct drm_mode_cursor *req = data; + struct drm_mode_object *obj; + struct drm_crtc *crtc; + int ret = 0; + + DRM_DEBUG("\n"); + + if (!req->flags) { + DRM_ERROR("no operation set\n"); + return -EINVAL; + } + + mutex_lock(&dev->mode_config.mutex); + obj = drm_mode_object_find(dev, req->crtc, DRM_MODE_OBJECT_CRTC); + if (!obj) { + DRM_DEBUG("Unknown CRTC ID %d\n", req->crtc); + ret = -EINVAL; + goto out; + } + crtc = obj_to_crtc(obj); + + if (req->flags & DRM_MODE_CURSOR_BO) { + /* Turn of the cursor if handle is 0 */ + if (crtc->funcs->cursor_set) { + ret = crtc->funcs->cursor_set(crtc, req->handle, req->width, req->height); + } else { + DRM_ERROR("crtc does not support cursor\n"); + ret = -EFAULT; + goto out; + } + } + + if (req->flags & DRM_MODE_CURSOR_MOVE) { + if (crtc->funcs->cursor_move) { + ret = crtc->funcs->cursor_move(crtc, req->x, req->y); + } else { + DRM_ERROR("crtc does not support cursor\n"); + ret = -EFAULT; + goto out; + } + } +out: + mutex_unlock(&dev->mode_config.mutex); + return ret; +} + +/** + * drm_mode_addfb - add an FB to the graphics configuration + * @inode: inode from the ioctl + * @filp: file * from the ioctl + * @cmd: cmd from ioctl + * @arg: arg from ioctl + * + * LOCKING: + * Takes mode config lock. + * + * Add a new FB to the specified CRTC, given a user request. + * + * Called by the user via ioctl. + * + * RETURNS: + * Zero on success, errno on failure. + */ +int drm_mode_addfb(struct drm_device *dev, + void *data, struct drm_file *file_priv) +{ + struct drm_mode_fb_cmd *r = data; + struct drm_mode_config *config = &dev->mode_config; + struct drm_framebuffer *fb; + int ret = 0; + + if ((config->min_width > r->width) || (r->width > config->max_width)) { + DRM_ERROR("mode new framebuffer width not within limits\n"); + return -EINVAL; + } + if ((config->min_height > r->height) || (r->height > config->max_height)) { + DRM_ERROR("mode new framebuffer height not within limits\n"); + return -EINVAL; + } + + mutex_lock(&dev->mode_config.mutex); + + /* TODO check buffer is sufficently large */ + /* TODO setup destructor callback */ + + fb = dev->mode_config.funcs->fb_create(dev, file_priv, r); + if (!fb) { + DRM_ERROR("could not create framebuffer\n"); + ret = -EINVAL; + goto out; + } + + r->buffer_id = fb->base.id; + list_add(&fb->filp_head, &file_priv->fbs); + +out: + mutex_unlock(&dev->mode_config.mutex); + return ret; +} + +/** + * drm_mode_rmfb - remove an FB from the configuration + * @inode: inode from the ioctl + * @filp: file * from the ioctl + * @cmd: cmd from ioctl + * @arg: arg from ioctl + * + * LOCKING: + * Takes mode config lock. + * + * Remove the FB specified by the user. + * + * Called by the user via ioctl. + * + * RETURNS: + * Zero on success, errno on failure. + */ +int drm_mode_rmfb(struct drm_device *dev, + void *data, struct drm_file *file_priv) +{ + struct drm_mode_object *obj; + struct drm_framebuffer *fb = NULL; + struct drm_framebuffer *fbl = NULL; + uint32_t *id = data; + int ret = 0; + int found = 0; + + mutex_lock(&dev->mode_config.mutex); + obj = drm_mode_object_find(dev, *id, DRM_MODE_OBJECT_FB); + /* TODO check that we realy get a framebuffer back. */ + if (!obj) { + DRM_ERROR("mode invalid framebuffer id\n"); + ret = -EINVAL; + goto out; + } + fb = obj_to_fb(obj); + + list_for_each_entry(fbl, &file_priv->fbs, filp_head) + if (fb == fbl) + found = 1; + + if (!found) { + DRM_ERROR("tried to remove a fb that we didn't own\n"); + ret = -EINVAL; + goto out; + } + + /* TODO release all crtc connected to the framebuffer */ + /* TODO unhock the destructor from the buffer object */ + + list_del(&fb->filp_head); + fb->funcs->destroy(fb); + +out: + mutex_unlock(&dev->mode_config.mutex); + return ret; +} + +/** + * drm_mode_getfb - get FB info + * @inode: inode from the ioctl + * @filp: file * from the ioctl + * @cmd: cmd from ioctl + * @arg: arg from ioctl + * + * LOCKING: + * Caller? (FIXME) + * + * Lookup the FB given its ID and return info about it. + * + * Called by the user via ioctl. + * + * RETURNS: + * Zero on success, errno on failure. + */ +int drm_mode_getfb(struct drm_device *dev, + void *data, struct drm_file *file_priv) +{ + struct drm_mode_fb_cmd *r = data; + struct drm_mode_object *obj; + struct drm_framebuffer *fb; + int ret = 0; + + mutex_lock(&dev->mode_config.mutex); + obj = drm_mode_object_find(dev, r->buffer_id, DRM_MODE_OBJECT_FB); + if (!obj) { + DRM_ERROR("invalid framebuffer id\n"); + ret = -EINVAL; + goto out; + } + fb = obj_to_fb(obj); + + r->height = fb->height; + r->width = fb->width; + r->depth = fb->depth; + r->bpp = fb->bits_per_pixel; + r->handle = fb->mm_handle; + r->pitch = fb->pitch; + +out: + mutex_unlock(&dev->mode_config.mutex); + return ret; +} + +/** + * drm_fb_release - remove and free the FBs on this file + * @filp: file * from the ioctl + * + * LOCKING: + * Takes mode config lock. + * + * Destroy all the FBs associated with @filp. + * + * Called by the user via ioctl. + * + * RETURNS: + * Zero on success, errno on failure. + */ +void drm_fb_release(struct file *filp) +{ + struct drm_file *priv = filp->private_data; + struct drm_device *dev = priv->minor->dev; + struct drm_framebuffer *fb, *tfb; + + mutex_lock(&dev->mode_config.mutex); + list_for_each_entry_safe(fb, tfb, &priv->fbs, filp_head) { + list_del(&fb->filp_head); + fb->funcs->destroy(fb); + } + mutex_unlock(&dev->mode_config.mutex); +} + +/* + * + */ + +static int drm_mode_attachmode(struct drm_device *dev, + struct drm_connector *connector, + struct drm_display_mode *mode) +{ + int ret = 0; + + list_add_tail(&mode->head, &connector->user_modes); + return ret; +} + +int drm_mode_attachmode_crtc(struct drm_device *dev, struct drm_crtc *crtc, + struct drm_display_mode *mode) +{ + struct drm_connector *connector; + int ret = 0; + struct drm_display_mode *dup_mode; + int need_dup = 0; + list_for_each_entry(connector, &dev->mode_config.connector_list, head) { + if (!connector->encoder) + break; + if (connector->encoder->crtc == crtc) { + if (need_dup) + dup_mode = drm_mode_duplicate(dev, mode); + else + dup_mode = mode; + ret = drm_mode_attachmode(dev, connector, dup_mode); + if (ret) + return ret; + need_dup = 1; + } + } + return 0; +} +EXPORT_SYMBOL(drm_mode_attachmode_crtc); + +static int drm_mode_detachmode(struct drm_device *dev, + struct drm_connector *connector, + struct drm_display_mode *mode) +{ + int found = 0; + int ret = 0; + struct drm_display_mode *match_mode, *t; + + list_for_each_entry_safe(match_mode, t, &connector->user_modes, head) { + if (drm_mode_equal(match_mode, mode)) { + list_del(&match_mode->head); + drm_mode_destroy(dev, match_mode); + found = 1; + break; + } + } + + if (!found) + ret = -EINVAL; + + return ret; +} + +int drm_mode_detachmode_crtc(struct drm_device *dev, struct drm_display_mode *mode) +{ + struct drm_connector *connector; + + list_for_each_entry(connector, &dev->mode_config.connector_list, head) { + drm_mode_detachmode(dev, connector, mode); + } + return 0; +} +EXPORT_SYMBOL(drm_mode_detachmode_crtc); + +/** + * drm_fb_attachmode - Attach a user mode to an connector + * @inode: inode from the ioctl + * @filp: file * from the ioctl + * @cmd: cmd from ioctl + * @arg: arg from ioctl + * + * This attaches a user specified mode to an connector. + * Called by the user via ioctl. + * + * RETURNS: + * Zero on success, errno on failure. + */ +int drm_mode_attachmode_ioctl(struct drm_device *dev, + void *data, struct drm_file *file_priv) +{ + struct drm_mode_mode_cmd *mode_cmd = data; + struct drm_connector *connector; + struct drm_display_mode *mode; + struct drm_mode_object *obj; + struct drm_mode_modeinfo *umode = &mode_cmd->mode; + int ret = 0; + + mutex_lock(&dev->mode_config.mutex); + + obj = drm_mode_object_find(dev, mode_cmd->connector_id, DRM_MODE_OBJECT_CONNECTOR); + if (!obj) { + ret = -EINVAL; + goto out; + } + connector = obj_to_connector(obj); + + mode = drm_mode_create(dev); + if (!mode) { + ret = -ENOMEM; + goto out; + } + + drm_crtc_convert_umode(mode, umode); + + ret = drm_mode_attachmode(dev, connector, mode); +out: + mutex_unlock(&dev->mode_config.mutex); + return ret; +} + + +/** + * drm_fb_detachmode - Detach a user specified mode from an connector + * @inode: inode from the ioctl + * @filp: file * from the ioctl + * @cmd: cmd from ioctl + * @arg: arg from ioctl + * + * Called by the user via ioctl. + * + * RETURNS: + * Zero on success, errno on failure. + */ +int drm_mode_detachmode_ioctl(struct drm_device *dev, + void *data, struct drm_file *file_priv) +{ + struct drm_mode_object *obj; + struct drm_mode_mode_cmd *mode_cmd = data; + struct drm_connector *connector; + struct drm_display_mode mode; + struct drm_mode_modeinfo *umode = &mode_cmd->mode; + int ret = 0; + + mutex_lock(&dev->mode_config.mutex); + + obj = drm_mode_object_find(dev, mode_cmd->connector_id, DRM_MODE_OBJECT_CONNECTOR); + if (!obj) { + ret = -EINVAL; + goto out; + } + connector = obj_to_connector(obj); + + drm_crtc_convert_umode(&mode, umode); + ret = drm_mode_detachmode(dev, connector, &mode); +out: + mutex_unlock(&dev->mode_config.mutex); + return ret; +} + +struct drm_property *drm_property_create(struct drm_device *dev, int flags, + const char *name, int num_values) +{ + struct drm_property *property = NULL; + + property = kzalloc(sizeof(struct drm_property), GFP_KERNEL); + if (!property) + return NULL; + + if (num_values) { + property->values = kzalloc(sizeof(uint64_t)*num_values, GFP_KERNEL); + if (!property->values) + goto fail; + } + + drm_mode_object_get(dev, &property->base, DRM_MODE_OBJECT_PROPERTY); + property->flags = flags; + property->num_values = num_values; + INIT_LIST_HEAD(&property->enum_blob_list); + + if (name) + strncpy(property->name, name, DRM_PROP_NAME_LEN); + + list_add_tail(&property->head, &dev->mode_config.property_list); + return property; +fail: + kfree(property); + return NULL; +} +EXPORT_SYMBOL(drm_property_create); + +int drm_property_add_enum(struct drm_property *property, int index, + uint64_t value, const char *name) +{ + struct drm_property_enum *prop_enum; + + if (!(property->flags & DRM_MODE_PROP_ENUM)) + return -EINVAL; + + if (!list_empty(&property->enum_blob_list)) { + list_for_each_entry(prop_enum, &property->enum_blob_list, head) { + if (prop_enum->value == value) { + strncpy(prop_enum->name, name, DRM_PROP_NAME_LEN); + prop_enum->name[DRM_PROP_NAME_LEN-1] = '\0'; + return 0; + } + } + } + + prop_enum = kzalloc(sizeof(struct drm_property_enum), GFP_KERNEL); + if (!prop_enum) + return -ENOMEM; + + strncpy(prop_enum->name, name, DRM_PROP_NAME_LEN); + prop_enum->name[DRM_PROP_NAME_LEN-1] = '\0'; + prop_enum->value = value; + + property->values[index] = value; + list_add_tail(&prop_enum->head, &property->enum_blob_list); + return 0; +} +EXPORT_SYMBOL(drm_property_add_enum); + +void drm_property_destroy(struct drm_device *dev, struct drm_property *property) +{ + struct drm_property_enum *prop_enum, *pt; + + list_for_each_entry_safe(prop_enum, pt, &property->enum_blob_list, head) { + list_del(&prop_enum->head); + kfree(prop_enum); + } + + if (property->num_values) + kfree(property->values); + drm_mode_object_put(dev, &property->base); + list_del(&property->head); + kfree(property); +} +EXPORT_SYMBOL(drm_property_destroy); + +int drm_connector_attach_property(struct drm_connector *connector, + struct drm_property *property, uint64_t init_val) +{ + int i; + + for (i = 0; i < DRM_CONNECTOR_MAX_PROPERTY; i++) { + if (connector->property_ids[i] == 0) { + connector->property_ids[i] = property->base.id; + connector->property_values[i] = init_val; + break; + } + } + + if (i == DRM_CONNECTOR_MAX_PROPERTY) + return -EINVAL; + return 0; +} +EXPORT_SYMBOL(drm_connector_attach_property); + +int drm_connector_property_set_value(struct drm_connector *connector, + struct drm_property *property, uint64_t value) +{ + int i; + + for (i = 0; i < DRM_CONNECTOR_MAX_PROPERTY; i++) { + if (connector->property_ids[i] == property->base.id) { + connector->property_values[i] = value; + break; + } + } + + if (i == DRM_CONNECTOR_MAX_PROPERTY) + return -EINVAL; + return 0; +} +EXPORT_SYMBOL(drm_connector_property_set_value); + +int drm_connector_property_get_value(struct drm_connector *connector, + struct drm_property *property, uint64_t *val) +{ + int i; + + for (i = 0; i < DRM_CONNECTOR_MAX_PROPERTY; i++) { + if (connector->property_ids[i] == property->base.id) { + *val = connector->property_values[i]; + break; + } + } + + if (i == DRM_CONNECTOR_MAX_PROPERTY) + return -EINVAL; + return 0; +} +EXPORT_SYMBOL(drm_connector_property_get_value); + +int drm_mode_getproperty_ioctl(struct drm_device *dev, + void *data, struct drm_file *file_priv) +{ + struct drm_mode_object *obj; + struct drm_mode_get_property *out_resp = data; + struct drm_property *property; + int enum_count = 0; + int blob_count = 0; + int value_count = 0; + int ret = 0, i; + int copied; + struct drm_property_enum *prop_enum; + struct drm_mode_property_enum __user *enum_ptr; + struct drm_property_blob *prop_blob; + uint32_t *blob_id_ptr; + uint64_t __user *values_ptr; + uint32_t __user *blob_length_ptr; + + mutex_lock(&dev->mode_config.mutex); + obj = drm_mode_object_find(dev, out_resp->prop_id, DRM_MODE_OBJECT_PROPERTY); + if (!obj) { + ret = -EINVAL; + goto done; + } + property = obj_to_property(obj); + + if (property->flags & DRM_MODE_PROP_ENUM) { + list_for_each_entry(prop_enum, &property->enum_blob_list, head) + enum_count++; + } else if (property->flags & DRM_MODE_PROP_BLOB) { + list_for_each_entry(prop_blob, &property->enum_blob_list, head) + blob_count++; + } + + value_count = property->num_values; + + strncpy(out_resp->name, property->name, DRM_PROP_NAME_LEN); + out_resp->name[DRM_PROP_NAME_LEN-1] = 0; + out_resp->flags = property->flags; + + if ((out_resp->count_values >= value_count) && value_count) { + values_ptr = (uint64_t *)(unsigned long)out_resp->values_ptr; + for (i = 0; i < value_count; i++) { + if (copy_to_user(values_ptr + i, &property->values[i], sizeof(uint64_t))) { + ret = -EFAULT; + goto done; + } + } + } + out_resp->count_values = value_count; + + if (property->flags & DRM_MODE_PROP_ENUM) { + + if ((out_resp->count_enum_blobs >= enum_count) && enum_count) { + copied = 0; + enum_ptr = (struct drm_mode_property_enum *)(unsigned long)out_resp->enum_blob_ptr; + list_for_each_entry(prop_enum, &property->enum_blob_list, head) { + + if (copy_to_user(&enum_ptr[copied].value, &prop_enum->value, sizeof(uint64_t))) { + ret = -EFAULT; + goto done; + } + + if (copy_to_user(&enum_ptr[copied].name, + &prop_enum->name, DRM_PROP_NAME_LEN)) { + ret = -EFAULT; + goto done; + } + copied++; + } + } + out_resp->count_enum_blobs = enum_count; + } + + if (property->flags & DRM_MODE_PROP_BLOB) { + if ((out_resp->count_enum_blobs >= blob_count) && blob_count) { + copied = 0; + blob_id_ptr = (uint32_t *)(unsigned long)out_resp->enum_blob_ptr; + blob_length_ptr = (uint32_t *)(unsigned long)out_resp->values_ptr; + + list_for_each_entry(prop_blob, &property->enum_blob_list, head) { + if (put_user(prop_blob->base.id, blob_id_ptr + copied)) { + ret = -EFAULT; + goto done; + } + + if (put_user(prop_blob->length, blob_length_ptr + copied)) { + ret = -EFAULT; + goto done; + } + + copied++; + } + } + out_resp->count_enum_blobs = enum_count; + } +done: + mutex_unlock(&dev->mode_config.mutex); + return ret; +} + +static struct drm_property_blob *drm_property_create_blob(struct drm_device *dev, int length, + void *data) +{ + struct drm_property_blob *blob; + + if (!length || !data) + return NULL; + + blob = kzalloc(sizeof(struct drm_property_blob)+length, GFP_KERNEL); + if (!blob) + return NULL; + + blob->data = (void *)((char *)blob + sizeof(struct drm_property_blob)); + blob->length = length; + + memcpy(blob->data, data, length); + + drm_mode_object_get(dev, &blob->base, DRM_MODE_OBJECT_BLOB); + + list_add_tail(&blob->head, &dev->mode_config.property_blob_list); + return blob; +} + +static void drm_property_destroy_blob(struct drm_device *dev, + struct drm_property_blob *blob) +{ + drm_mode_object_put(dev, &blob->base); + list_del(&blob->head); + kfree(blob); +} + +int drm_mode_getblob_ioctl(struct drm_device *dev, + void *data, struct drm_file *file_priv) +{ + struct drm_mode_object *obj; + struct drm_mode_get_blob *out_resp = data; + struct drm_property_blob *blob; + int ret = 0; + void *blob_ptr; + + mutex_lock(&dev->mode_config.mutex); + obj = drm_mode_object_find(dev, out_resp->blob_id, DRM_MODE_OBJECT_CONNECTOR); + if (!obj) { + ret = -EINVAL; + goto done; + } + blob = obj_to_blob(obj); + + if (out_resp->length == blob->length) { + blob_ptr = (void *)(unsigned long)out_resp->data; + if (copy_to_user(blob_ptr, blob->data, blob->length)){ + ret = -EFAULT; + goto done; + } + } + out_resp->length = blob->length; + +done: + mutex_unlock(&dev->mode_config.mutex); + return ret; +} + +int drm_mode_connector_update_edid_property(struct drm_connector *connector, struct edid *edid) +{ + struct drm_device *dev = connector->dev; + int ret = 0; + if (connector->edid_blob_ptr) + drm_property_destroy_blob(dev, connector->edid_blob_ptr); + + connector->edid_blob_ptr = drm_property_create_blob(connector->dev, 128, edid); + + ret = drm_connector_property_set_value(connector, dev->mode_config.edid_property, connector->edid_blob_ptr->base.id); + return ret; +} +EXPORT_SYMBOL(drm_mode_connector_update_edid_property); + +int drm_mode_connector_property_set_ioctl(struct drm_device *dev, + void *data, struct drm_file *file_priv) +{ + struct drm_mode_connector_set_property *out_resp = data; + struct drm_mode_object *obj; + struct drm_property *property; + struct drm_connector *connector; + int ret = -EINVAL; + int i; + + mutex_lock(&dev->mode_config.mutex); + + obj = drm_mode_object_find(dev, out_resp->connector_id, DRM_MODE_OBJECT_CONNECTOR); + if (!obj) { + goto out; + } + connector = obj_to_connector(obj); + + for (i = 0; i < DRM_CONNECTOR_MAX_PROPERTY; i++) { + if (connector->property_ids[i] == out_resp->prop_id) + break; + } + + if (i == DRM_CONNECTOR_MAX_PROPERTY) { + goto out; + } + + obj = drm_mode_object_find(dev, out_resp->prop_id, DRM_MODE_OBJECT_PROPERTY); + if (!obj) { + goto out; + } + property = obj_to_property(obj); + + if (property->flags & DRM_MODE_PROP_IMMUTABLE) + goto out; + + if (property->flags & DRM_MODE_PROP_RANGE) { + if (out_resp->value < property->values[0]) + goto out; + + if (out_resp->value > property->values[1]) + goto out; + } else { + int found = 0; + for (i = 0; i < property->num_values; i++) { + if (property->values[i] == out_resp->value) { + found = 1; + break; + } + } + if (!found) { + goto out; + } + } + + if (connector->funcs->set_property) + ret = connector->funcs->set_property(connector, property, out_resp->value); + +out: + mutex_unlock(&dev->mode_config.mutex); + return ret; +} + + +int drm_mode_replacefb(struct drm_device *dev, + void *data, struct drm_file *file_priv) +{ + struct drm_mode_fb_cmd *r = data; + struct drm_mode_object *obj; + struct drm_framebuffer *fb; + int found = 0; + struct drm_framebuffer *fbl = NULL; + int ret = 0; + + /* right replace the current bo attached to this fb with a new bo */ + mutex_lock(&dev->mode_config.mutex); + obj = drm_mode_object_find(dev, r->buffer_id, DRM_MODE_OBJECT_FB); + if (!obj) { + ret = -EINVAL; + goto out; + } + fb = obj_to_fb(obj); + + list_for_each_entry(fbl, &file_priv->fbs, filp_head) + if (fb == fbl) + found = 1; + + if (!found) { + DRM_ERROR("tried to replace an fb we didn't own\n"); + ret = -EINVAL; + goto out; + } + + if (dev->mode_config.funcs->resize_fb) + ret = dev->mode_config.funcs->resize_fb(dev, file_priv, fb, r); + else + ret = -EINVAL; +out: + mutex_unlock(&dev->mode_config.mutex); + return ret; + +} + +int drm_mode_connector_attach_encoder(struct drm_connector *connector, + struct drm_encoder *encoder) +{ + int i; + + for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) { + if (connector->encoder_ids[i] == 0) { + connector->encoder_ids[i] = encoder->base.id; + return 0; + } + } + return -ENOMEM; +} +EXPORT_SYMBOL(drm_mode_connector_attach_encoder); + +void drm_mode_connector_detach_encoder(struct drm_connector *connector, + struct drm_encoder *encoder) +{ + int i; + for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) { + if (connector->encoder_ids[i] == encoder->base.id) { + connector->encoder_ids[i] = 0; + if (connector->encoder == encoder) + connector->encoder = NULL; + break; + } + } +} +EXPORT_SYMBOL(drm_mode_connector_detach_encoder); + +bool drm_mode_crtc_set_gamma_size(struct drm_crtc *crtc, + int gamma_size) +{ + crtc->gamma_size = gamma_size; + + crtc->gamma_store = kzalloc(gamma_size * sizeof(uint16_t) * 3, GFP_KERNEL); + if (!crtc->gamma_store) { + crtc->gamma_size = 0; + return false; + } + + return true; +} +EXPORT_SYMBOL(drm_mode_crtc_set_gamma_size); + +int drm_mode_gamma_set_ioctl(struct drm_device *dev, + void *data, struct drm_file *file_priv) +{ + struct drm_mode_crtc_lut *crtc_lut = data; + struct drm_mode_object *obj; + struct drm_crtc *crtc; + void *r_base, *g_base, *b_base; + int size; + int ret = 0; + + mutex_lock(&dev->mode_config.mutex); + obj = drm_mode_object_find(dev, crtc_lut->crtc_id, DRM_MODE_OBJECT_CRTC); + if (!obj) { + ret = -EINVAL; + goto out; + } + crtc = obj_to_crtc(obj); + + /* memcpy into gamma store */ + if (crtc_lut->gamma_size != crtc->gamma_size) { + ret = -EINVAL; + goto out; + } + + size = crtc_lut->gamma_size * (sizeof(uint16_t)); + r_base = crtc->gamma_store; + if (copy_from_user(r_base, (void __user *)(unsigned long)crtc_lut->red, size)) { + ret = -EFAULT; + goto out; + } + + g_base = r_base + size; + if (copy_from_user(g_base, (void __user *)(unsigned long)crtc_lut->green, size)) { + ret = -EFAULT; + goto out; + } + + b_base = g_base + size; + if (copy_from_user(b_base, (void __user *)(unsigned long)crtc_lut->blue, size)) { + ret = -EFAULT; + goto out; + } + + crtc->funcs->gamma_set(crtc, r_base, g_base, b_base, crtc->gamma_size); + +out: + mutex_unlock(&dev->mode_config.mutex); + return ret; + +} + +int drm_mode_gamma_get_ioctl(struct drm_device *dev, + void *data, struct drm_file *file_priv) +{ + struct drm_mode_crtc_lut *crtc_lut = data; + struct drm_mode_object *obj; + struct drm_crtc *crtc; + void *r_base, *g_base, *b_base; + int size; + int ret = 0; + + mutex_lock(&dev->mode_config.mutex); + obj = drm_mode_object_find(dev, crtc_lut->crtc_id, DRM_MODE_OBJECT_CRTC); + if (!obj) { + ret = -EINVAL; + goto out; + } + crtc = obj_to_crtc(obj); + + /* memcpy into gamma store */ + if (crtc_lut->gamma_size != crtc->gamma_size) { + ret = -EINVAL; + goto out; + } + + size = crtc_lut->gamma_size * (sizeof(uint16_t)); + r_base = crtc->gamma_store; + if (copy_to_user((void __user *)(unsigned long)crtc_lut->red, r_base, size)) { + ret = -EFAULT; + goto out; + } + + g_base = r_base + size; + if (copy_to_user((void __user *)(unsigned long)crtc_lut->green, g_base, size)) { + ret = -EFAULT; + goto out; + } + + b_base = g_base + size; + if (copy_to_user((void __user *)(unsigned long)crtc_lut->blue, b_base, size)) { + ret = -EFAULT; + goto out; + } +out: + mutex_unlock(&dev->mode_config.mutex); + return ret; +} diff --git a/linux-core/drm_crtc.h b/linux-core/drm_crtc.h new file mode 100644 index 00000000..2b577b93 --- /dev/null +++ b/linux-core/drm_crtc.h @@ -0,0 +1,733 @@ +/* + * Copyright © 2006 Keith Packard + * Copyright © 2007 Intel Corporation + * Jesse Barnes <jesse.barnes@intel.com> + */ +#ifndef __DRM_CRTC_H__ +#define __DRM_CRTC_H__ + +#include <linux/i2c.h> +#include <linux/spinlock.h> +#include <linux/types.h> +#include <linux/idr.h> + +#include <linux/fb.h> + +struct drm_device; +struct drm_mode_set; +struct drm_framebuffer; + + +#define DRM_MODE_OBJECT_CRTC 0xcccccccc +#define DRM_MODE_OBJECT_CONNECTOR 0xc0c0c0c0 +#define DRM_MODE_OBJECT_ENCODER 0xe0e0e0e0 +#define DRM_MODE_OBJECT_MODE 0xdededede +#define DRM_MODE_OBJECT_PROPERTY 0xb0b0b0b0 +#define DRM_MODE_OBJECT_FB 0xfbfbfbfb +#define DRM_MODE_OBJECT_BLOB 0xbbbbbbbb + +struct drm_mode_object { + uint32_t id; + uint32_t type; +}; + +/* + * Note on terminology: here, for brevity and convenience, we refer to connector + * control chips as 'CRTCs'. They can control any type of connector, VGA, LVDS, + * DVI, etc. And 'screen' refers to the whole of the visible display, which + * may span multiple monitors (and therefore multiple CRTC and connector + * structures). + */ + +enum drm_mode_status { + MODE_OK = 0, /* Mode OK */ + MODE_HSYNC, /* hsync out of range */ + MODE_VSYNC, /* vsync out of range */ + MODE_H_ILLEGAL, /* mode has illegal horizontal timings */ + MODE_V_ILLEGAL, /* mode has illegal horizontal timings */ + MODE_BAD_WIDTH, /* requires an unsupported linepitch */ + MODE_NOMODE, /* no mode with a maching name */ + MODE_NO_INTERLACE, /* interlaced mode not supported */ + MODE_NO_DBLESCAN, /* doublescan mode not supported */ + MODE_NO_VSCAN, /* multiscan mode not supported */ + MODE_MEM, /* insufficient video memory */ + MODE_VIRTUAL_X, /* mode width too large for specified virtual size */ + MODE_VIRTUAL_Y, /* mode height too large for specified virtual size */ + MODE_MEM_VIRT, /* insufficient video memory given virtual size */ + MODE_NOCLOCK, /* no fixed clock available */ + MODE_CLOCK_HIGH, /* clock required is too high */ + MODE_CLOCK_LOW, /* clock required is too low */ + MODE_CLOCK_RANGE, /* clock/mode isn't in a ClockRange */ + MODE_BAD_HVALUE, /* horizontal timing was out of range */ + MODE_BAD_VVALUE, /* vertical timing was out of range */ + MODE_BAD_VSCAN, /* VScan value out of range */ + MODE_HSYNC_NARROW, /* horizontal sync too narrow */ + MODE_HSYNC_WIDE, /* horizontal sync too wide */ + MODE_HBLANK_NARROW, /* horizontal blanking too narrow */ + MODE_HBLANK_WIDE, /* horizontal blanking too wide */ + MODE_VSYNC_NARROW, /* vertical sync too narrow */ + MODE_VSYNC_WIDE, /* vertical sync too wide */ + MODE_VBLANK_NARROW, /* vertical blanking too narrow */ + MODE_VBLANK_WIDE, /* vertical blanking too wide */ + MODE_PANEL, /* exceeds panel dimensions */ + MODE_INTERLACE_WIDTH, /* width too large for interlaced mode */ + MODE_ONE_WIDTH, /* only one width is supported */ + MODE_ONE_HEIGHT, /* only one height is supported */ + MODE_ONE_SIZE, /* only one resolution is supported */ + MODE_NO_REDUCED, /* monitor doesn't accept reduced blanking */ + MODE_UNVERIFIED = -3, /* mode needs to reverified */ + MODE_BAD = -2, /* unspecified reason */ + MODE_ERROR = -1 /* error condition */ +}; + +#define DRM_MODE_TYPE_CLOCK_CRTC_C (DRM_MODE_TYPE_CLOCK_C | \ + DRM_MODE_TYPE_CRTC_C) + +#define DRM_MODE(nm, t, c, hd, hss, hse, ht, hsk, vd, vss, vse, vt, vs, f) \ + .name = nm, .status = 0, .type = (t), .clock = (c), \ + .hdisplay = (hd), .hsync_start = (hss), .hsync_end = (hse), \ + .htotal = (ht), .hskew = (hsk), .vdisplay = (vd), \ + .vsync_start = (vss), .vsync_end = (vse), .vtotal = (vt), \ + .vscan = (vs), .flags = (f), .vrefresh = 0 + +struct drm_display_mode { + /* Header */ + struct list_head head; + struct drm_mode_object base; + + char name[DRM_DISPLAY_MODE_LEN]; + + int connector_count; + enum drm_mode_status status; + int type; + + /* Proposed mode values */ + int clock; + int hdisplay; + int hsync_start; + int hsync_end; + int htotal; + int hskew; + int vdisplay; + int vsync_start; + int vsync_end; + int vtotal; + int vscan; + unsigned int flags; + + /* Addressable image size (may be 0 for projectors, etc.) */ + int width_mm; + int height_mm; + + /* Actual mode we give to hw */ + int clock_index; + int synth_clock; + int crtc_hdisplay; + int crtc_hblank_start; + int crtc_hblank_end; + int crtc_hsync_start; + int crtc_hsync_end; + int crtc_htotal; + int crtc_hskew; + int crtc_vdisplay; + int crtc_vblank_start; + int crtc_vblank_end; + int crtc_vsync_start; + int crtc_vsync_end; + int crtc_vtotal; + int crtc_hadjusted; + int crtc_vadjusted; + + /* Driver private mode info */ + int private_size; + int *private; + int private_flags; + + int vrefresh; + float hsync; +}; + +/* Video mode flags */ +#define V_PHSYNC (1<<0) +#define V_NHSYNC (1<<1) +#define V_PVSYNC (1<<2) +#define V_NVSYNC (1<<3) +#define V_INTERLACE (1<<4) +#define V_DBLSCAN (1<<5) +#define V_CSYNC (1<<6) +#define V_PCSYNC (1<<7) +#define V_NCSYNC (1<<8) +#define V_HSKEW (1<<9) /* hskew provided */ +#define V_BCAST (1<<10) +#define V_PIXMUX (1<<11) +#define V_DBLCLK (1<<12) +#define V_CLKDIV2 (1<<13) + +#define CRTC_INTERLACE_HALVE_V 0x1 /* halve V values for interlacing */ + +#define DPMSModeOn 0 +#define DPMSModeStandby 1 +#define DPMSModeSuspend 2 +#define DPMSModeOff 3 + +#define DRM_MODE_CONNECTOR_Unknown 0 +#define DRM_MODE_CONNECTOR_VGA 1 +#define DRM_MODE_CONNECTOR_DVII 2 +#define DRM_MODE_CONNECTOR_DVID 3 +#define DRM_MODE_CONNECTOR_DVIA 4 +#define DRM_MODE_CONNECTOR_Composite 5 +#define DRM_MODE_CONNECTOR_SVIDEO 6 +#define DRM_MODE_CONNECTOR_LVDS 7 +#define DRM_MODE_CONNECTOR_Component 8 +#define DRM_MODE_CONNECTOR_9PinDIN 9 +#define DRM_MODE_CONNECTOR_DisplayPort 10 +#define DRM_MODE_CONNECTOR_HDMIA 11 +#define DRM_MODE_CONNECTOR_HDMIB 12 + +enum drm_connector_status { + connector_status_connected = 1, + connector_status_disconnected = 2, + connector_status_unknown = 3, +}; + +enum subpixel_order { + SubPixelUnknown = 0, + SubPixelHorizontalRGB, + SubPixelHorizontalBGR, + SubPixelVerticalRGB, + SubPixelVerticalBGR, + SubPixelNone, +}; + + +/* + * Describes a given display (e.g. CRT or flat panel) and its limitations. + */ +struct drm_display_info { + char name[DRM_DISPLAY_INFO_LEN]; + /* Input info */ + bool serration_vsync; + bool sync_on_green; + bool composite_sync; + bool separate_syncs; + bool blank_to_black; + unsigned char video_level; + bool digital; + /* Physical size */ + unsigned int width_mm; + unsigned int height_mm; + + /* Display parameters */ + unsigned char gamma; /* FIXME: storage format */ + bool gtf_supported; + bool standard_color; + enum { + monochrome = 0, + rgb, + other, + unknown, + } display_type; + bool active_off_supported; + bool suspend_supported; + bool standby_supported; + + /* Color info FIXME: storage format */ + unsigned short redx, redy; + unsigned short greenx, greeny; + unsigned short bluex, bluey; + unsigned short whitex, whitey; + + /* Clock limits FIXME: storage format */ + unsigned int min_vfreq, max_vfreq; + unsigned int min_hfreq, max_hfreq; + unsigned int pixel_clock; + + /* White point indices FIXME: storage format */ + unsigned int wpx1, wpy1; + unsigned int wpgamma1; + unsigned int wpx2, wpy2; + unsigned int wpgamma2; + + enum subpixel_order subpixel_order; + + char *raw_edid; /* if any */ +}; + +struct drm_framebuffer_funcs { + void (*destroy)(struct drm_framebuffer *framebuffer); +}; + +struct drm_framebuffer { + struct drm_device *dev; + struct list_head head; + struct drm_mode_object base; + const struct drm_framebuffer_funcs *funcs; + unsigned int pitch; + unsigned int width; + unsigned int height; + /* depth can be 15 or 16 */ + unsigned int depth; + int bits_per_pixel; + int flags; + void *fbdev; + u32 pseudo_palette[17]; + struct list_head filp_head; + uint32_t mm_handle; +}; + +struct drm_property_blob { + struct drm_mode_object base; + struct list_head head; + unsigned int length; + void *data; +}; + +struct drm_property_enum { + uint64_t value; + struct list_head head; + char name[DRM_PROP_NAME_LEN]; +}; + +struct drm_property { + struct list_head head; + struct drm_mode_object base; + uint32_t flags; + char name[DRM_PROP_NAME_LEN]; + uint32_t num_values; + uint64_t *values; + + struct list_head enum_blob_list; +}; + +struct drm_crtc; +struct drm_connector; +struct drm_encoder; + +/** + * drm_crtc_funcs - control CRTCs for a given device + * @dpms: control display power levels + * @save: save CRTC state + * @resore: restore CRTC state + * @lock: lock the CRTC + * @unlock: unlock the CRTC + * @shadow_allocate: allocate shadow pixmap + * @shadow_create: create shadow pixmap for rotation support + * @shadow_destroy: free shadow pixmap + * @mode_fixup: fixup proposed mode + * @mode_set: set the desired mode on the CRTC + * @gamma_set: specify color ramp for CRTC + * @destroy: deinit and free object. + * + * The drm_crtc_funcs structure is the central CRTC management structure + * in the DRM. Each CRTC controls one or more connectors (note that the name + * CRTC is simply historical, a CRTC may control LVDS, VGA, DVI, TV out, etc. + * connectors, not just CRTs). + * + * Each driver is responsible for filling out this structure at startup time, + * in addition to providing other modesetting features, like i2c and DDC + * bus accessors. + */ +struct drm_crtc_funcs { + /* Save CRTC state */ + void (*save)(struct drm_crtc *crtc); /* suspend? */ + /* Restore CRTC state */ + void (*restore)(struct drm_crtc *crtc); /* resume? */ + + /* cursor controls */ + int (*cursor_set)(struct drm_crtc *crtc, uint32_t buffer_handle, + uint32_t width, uint32_t height); + int (*cursor_move)(struct drm_crtc *crtc, int x, int y); + + /* Set gamma on the CRTC */ + void (*gamma_set)(struct drm_crtc *crtc, u16 *r, u16 *g, u16 *b, + uint32_t size); + /* Object destroy routine */ + void (*destroy)(struct drm_crtc *crtc); + + int (*set_config)(struct drm_mode_set *set); +}; + +/** + * drm_crtc - central CRTC control structure + * @enabled: is this CRTC enabled? + * @x: x position on screen + * @y: y position on screen + * @desired_mode: new desired mode + * @desired_x: desired x for desired_mode + * @desired_y: desired y for desired_mode + * @funcs: CRTC control functions + * + * Each CRTC may have one or more connectors associated with it. This structure + * allows the CRTC to be controlled. + */ +struct drm_crtc { + struct drm_device *dev; + struct list_head head; + + struct drm_mode_object base; + + /* framebuffer the connector is currently bound to */ + struct drm_framebuffer *fb; + + bool enabled; + + struct drm_display_mode mode; + + int x, y; + struct drm_display_mode *desired_mode; + int desired_x, desired_y; + const struct drm_crtc_funcs *funcs; + + /* CRTC gamma size for reporting to userspace */ + uint32_t gamma_size; + uint16_t *gamma_store; + + /* if you are using the helper */ + void *helper_private; +}; + + +/** + * drm_connector_funcs - control connectors on a given device + * @dpms: set power state (see drm_crtc_funcs above) + * @save: save connector state + * @restore: restore connector state + * @mode_valid: is this mode valid on the given connector? + * @mode_fixup: try to fixup proposed mode for this connector + * @mode_set: set this mode + * @detect: is this connector active? + * @get_modes: get mode list for this connector + * @set_property: property for this connector may need update + * @destroy: make object go away + * + * Each CRTC may have one or more connectors attached to it. The functions + * below allow the core DRM code to control connectors, enumerate available modes, + * etc. + */ +struct drm_connector_funcs { + void (*dpms)(struct drm_connector *connector, int mode); + void (*save)(struct drm_connector *connector); + void (*restore)(struct drm_connector *connector); + enum drm_connector_status (*detect)(struct drm_connector *connector); + void (*fill_modes)(struct drm_connector *connector, uint32_t max_width, uint32_t max_height); + bool (*set_property)(struct drm_connector *connector, struct drm_property *property, + uint64_t val); + void (*destroy)(struct drm_connector *connector); +}; + +struct drm_encoder_funcs { + void (*destroy)(struct drm_encoder *encoder); +}; + +#define DRM_CONNECTOR_MAX_UMODES 16 +#define DRM_CONNECTOR_MAX_PROPERTY 16 +#define DRM_CONNECTOR_LEN 32 +#define DRM_CONNECTOR_MAX_ENCODER 2 + +/** + * drm_encoder - central DRM encoder structure + */ +struct drm_encoder { + struct drm_device *dev; + struct list_head head; + + struct drm_mode_object base; + int encoder_type; + uint32_t possible_crtcs; + uint32_t possible_clones; + + struct drm_crtc *crtc; + const struct drm_encoder_funcs *funcs; + void *helper_private; +}; + +/** + * drm_connector - central DRM connector control structure + * @crtc: CRTC this connector is currently connected to, NULL if none + * @interlace_allowed: can this connector handle interlaced modes? + * @doublescan_allowed: can this connector handle doublescan? + * @available_modes: modes available on this connector (from get_modes() + user) + * @initial_x: initial x position for this connector + * @initial_y: initial y position for this connector + * @status: connector connected? + * @funcs: connector control functions + * + * Each connector may be connected to one or more CRTCs, or may be clonable by + * another connector if they can share a CRTC. Each connector also has a specific + * position in the broader display (referred to as a 'screen' though it could + * span multiple monitors). + */ +struct drm_connector { + struct drm_device *dev; + struct device kdev; + struct device_attribute *attr; + struct list_head head; + + struct drm_mode_object base; + + int connector_type; + int connector_type_id; + bool interlace_allowed; + bool doublescan_allowed; + struct list_head modes; /* list of modes on this connector */ + + int initial_x, initial_y; + enum drm_connector_status status; + + /* these are modes added by probing with DDC or the BIOS */ + struct list_head probed_modes; + + struct drm_display_info display_info; + const struct drm_connector_funcs *funcs; + + struct list_head user_modes; + struct drm_property_blob *edid_blob_ptr; + u32 property_ids[DRM_CONNECTOR_MAX_PROPERTY]; + uint64_t property_values[DRM_CONNECTOR_MAX_PROPERTY]; + + void *helper_private; + + uint32_t encoder_ids[DRM_CONNECTOR_MAX_ENCODER]; + uint32_t force_encoder_id; + struct drm_encoder *encoder; /* currently active encoder */ +}; + +/** + * struct drm_mode_set + * + * Represents a single crtc the connectors that it drives with what mode + * and from which framebuffer it scans out from. + * + * This is used to set modes. + */ +struct drm_mode_set { + struct list_head head; + + struct drm_framebuffer *fb; + struct drm_crtc *crtc; + struct drm_display_mode *mode; + + uint32_t x; + uint32_t y; + + struct drm_connector **connectors; + size_t num_connectors; +}; + +/** + * struct drm_mode_config_funcs - configure CRTCs for a given screen layout + * @resize: adjust CRTCs as necessary for the proposed layout + * + * Currently only a resize hook is available. DRM will call back into the + * driver with a new screen width and height. If the driver can't support + * the proposed size, it can return false. Otherwise it should adjust + * the CRTC<->connector mappings as needed and update its view of the screen. + */ +struct drm_mode_config_funcs { + int (*resize_fb)(struct drm_device *dev, struct drm_file *file_priv, struct drm_framebuffer *fb, struct drm_mode_fb_cmd *mode_cmd); + struct drm_framebuffer *(*fb_create)(struct drm_device *dev, struct drm_file *file_priv, struct drm_mode_fb_cmd *mode_cmd); + int (*fb_changed)(struct drm_device *dev); +}; + +struct drm_mode_group { + uint32_t num_crtcs; + uint32_t num_encoders; + uint32_t num_connectors; + + /* list of object IDs for this group */ + uint32_t *id_list; +}; + +/** + * drm_mode_config - Mode configuration control structure + * + */ +struct drm_mode_config { + struct mutex mutex; /* protects configuration and IDR */ + struct idr crtc_idr; /* use this idr for all IDs, fb, crtc, connector, modes - just makes life easier */ + /* this is limited to one for now */ + int num_fb; + struct list_head fb_list; + int num_connector; + struct list_head connector_list; + int num_encoder; + struct list_head encoder_list; + + int num_crtc; + struct list_head crtc_list; + + struct list_head property_list; + + /* in-kernel framebuffers - hung of filp_head in drm_framebuffer */ + struct list_head fb_kernel_list; + + /* currently in use generation id */ + int current_generation; + + int min_width, min_height; + int max_width, max_height; + struct drm_mode_config_funcs *funcs; + unsigned long fb_base; + + /* pointers to standard properties */ + struct list_head property_blob_list; + struct drm_property *edid_property; + struct drm_property *dpms_property; + + /* TV properties */ + struct drm_property *tv_mode_property; + struct drm_property *tv_left_margin_property; + struct drm_property *tv_right_margin_property; + struct drm_property *tv_top_margin_property; + struct drm_property *tv_bottom_margin_property; + + /* hotplug */ + uint32_t hotplug_counter; +}; + +#define obj_to_crtc(x) container_of(x, struct drm_crtc, base) +#define obj_to_connector(x) container_of(x, struct drm_connector, base) +#define obj_to_encoder(x) container_of(x, struct drm_encoder, base) +#define obj_to_mode(x) container_of(x, struct drm_display_mode, base) +#define obj_to_fb(x) container_of(x, struct drm_framebuffer, base) +#define obj_to_property(x) container_of(x, struct drm_property, base) +#define obj_to_blob(x) container_of(x, struct drm_property_blob, base) + + +extern void drm_crtc_init(struct drm_device *dev, + struct drm_crtc *crtc, + const struct drm_crtc_funcs *funcs); +extern void drm_crtc_cleanup(struct drm_crtc *crtc); + +extern void drm_connector_init(struct drm_device *dev, + struct drm_connector *connector, + const struct drm_connector_funcs *funcs, + int connector_type); + +extern void drm_connector_cleanup(struct drm_connector *connector); + +extern void drm_encoder_init(struct drm_device *dev, + struct drm_encoder *encoder, + const struct drm_encoder_funcs *funcs, + int encoder_type); + +extern void drm_encoder_cleanup(struct drm_encoder *encoder); + +extern char *drm_get_connector_name(struct drm_connector *connector); +extern char *drm_get_dpms_name(int val); +extern void drm_fb_release(struct file *filp); +extern int drm_mode_group_init_legacy_group(struct drm_device *dev, struct drm_mode_group *group); +extern struct edid *drm_get_edid(struct drm_connector *connector, + struct i2c_adapter *adapter); +extern int drm_add_edid_modes(struct drm_connector *connector, struct edid *edid); +extern void drm_mode_probed_add(struct drm_connector *connector, struct drm_display_mode *mode); +extern void drm_mode_remove(struct drm_connector *connector, struct drm_display_mode *mode); +extern struct drm_display_mode *drm_mode_duplicate(struct drm_device *dev, + struct drm_display_mode *mode); +extern void drm_mode_debug_printmodeline(struct drm_display_mode *mode); +extern void drm_mode_config_init(struct drm_device *dev); +extern void drm_mode_config_cleanup(struct drm_device *dev); +extern void drm_mode_set_name(struct drm_display_mode *mode); +extern bool drm_mode_equal(struct drm_display_mode *mode1, struct drm_display_mode *mode2); + +/* for us by fb module */ +extern int drm_mode_attachmode_crtc(struct drm_device *dev, + struct drm_crtc *crtc, + struct drm_display_mode *mode); +extern int drm_mode_detachmode_crtc(struct drm_device *dev, struct drm_display_mode *mode); + +extern struct drm_display_mode *drm_mode_create(struct drm_device *dev); +extern void drm_mode_destroy(struct drm_device *dev, struct drm_display_mode *mode); +extern void drm_mode_list_concat(struct list_head *head, + struct list_head *new); +extern void drm_mode_validate_size(struct drm_device *dev, + struct list_head *mode_list, + int maxX, int maxY, int maxPitch); +extern void drm_mode_prune_invalid(struct drm_device *dev, + struct list_head *mode_list, bool verbose); +extern void drm_mode_sort(struct list_head *mode_list); +extern int drm_mode_vrefresh(struct drm_display_mode *mode); +extern void drm_mode_set_crtcinfo(struct drm_display_mode *p, + int adjust_flags); +extern void drm_mode_connector_list_update(struct drm_connector *connector); +extern int drm_mode_connector_update_edid_property(struct drm_connector *connector, + struct edid *edid); +extern int drm_connector_property_set_value(struct drm_connector *connector, + struct drm_property *property, + uint64_t value); +extern int drm_connector_property_get_value(struct drm_connector *connector, + struct drm_property *property, + uint64_t *value); +extern struct drm_display_mode *drm_crtc_mode_create(struct drm_device *dev); +extern void drm_framebuffer_set_object(struct drm_device *dev, + unsigned long handle); +extern struct drm_framebuffer *drm_framebuffer_init(struct drm_device *dev, struct drm_framebuffer *fb, + const struct drm_framebuffer_funcs *funcs); +extern void drm_framebuffer_cleanup(struct drm_framebuffer *fb); +extern int drmfb_probe(struct drm_device *dev, struct drm_crtc *crtc); +extern int drmfb_remove(struct drm_device *dev, struct drm_framebuffer *fb); +extern void drm_crtc_probe_connector_modes(struct drm_device *dev, int maxX, int maxY); +extern bool drm_crtc_in_use(struct drm_crtc *crtc); + +extern int drm_connector_attach_property(struct drm_connector *connector, + struct drm_property *property, uint64_t init_val); +extern struct drm_property *drm_property_create(struct drm_device *dev, int flags, + const char *name, int num_values); +extern void drm_property_destroy(struct drm_device *dev, struct drm_property *property); +extern int drm_property_add_enum(struct drm_property *property, int index, + uint64_t value, const char *name); +extern bool drm_create_tv_properties(struct drm_device *dev, int num_formats, + char *formats[]); +extern char *drm_get_encoder_name(struct drm_encoder *encoder); + +extern int drm_mode_connector_attach_encoder(struct drm_connector *connector, + struct drm_encoder *encoder); +extern void drm_mode_connector_detach_encoder(struct drm_connector *connector, + struct drm_encoder *encoder); +extern bool drm_mode_crtc_set_gamma_size(struct drm_crtc *crtc, + int gamma_size); +/* IOCTLs */ +extern int drm_mode_getresources(struct drm_device *dev, + void *data, struct drm_file *file_priv); + +extern int drm_mode_getcrtc(struct drm_device *dev, + void *data, struct drm_file *file_priv); +extern int drm_mode_getconnector(struct drm_device *dev, + void *data, struct drm_file *file_priv); +extern int drm_mode_setcrtc(struct drm_device *dev, + void *data, struct drm_file *file_priv); +extern int drm_mode_cursor_ioctl(struct drm_device *dev, + void *data, struct drm_file *file_priv); +extern int drm_mode_addfb(struct drm_device *dev, + void *data, struct drm_file *file_priv); +extern int drm_mode_rmfb(struct drm_device *dev, + void *data, struct drm_file *file_priv); +extern int drm_mode_getfb(struct drm_device *dev, + void *data, struct drm_file *file_priv); +extern int drm_mode_addmode_ioctl(struct drm_device *dev, + void *data, struct drm_file *file_priv); +extern int drm_mode_rmmode_ioctl(struct drm_device *dev, + void *data, struct drm_file *file_priv); +extern int drm_mode_attachmode_ioctl(struct drm_device *dev, + void *data, struct drm_file *file_priv); +extern int drm_mode_detachmode_ioctl(struct drm_device *dev, + void *data, struct drm_file *file_priv); + +extern int drm_mode_getproperty_ioctl(struct drm_device *dev, + void *data, struct drm_file *file_priv); +extern int drm_mode_getblob_ioctl(struct drm_device *dev, + void *data, struct drm_file *file_priv); +extern int drm_mode_connector_property_set_ioctl(struct drm_device *dev, + void *data, struct drm_file *file_priv); +extern int drm_mode_hotplug_ioctl(struct drm_device *dev, + void *data, struct drm_file *file_priv); +extern int drm_mode_replacefb(struct drm_device *dev, + void *data, struct drm_file *file_priv); +extern int drm_mode_getencoder(struct drm_device *dev, + void *data, struct drm_file *file_priv); +extern int drm_mode_gamma_get_ioctl(struct drm_device *dev, + void *data, struct drm_file *file_priv); +extern int drm_mode_gamma_set_ioctl(struct drm_device *dev, + void *data, struct drm_file *file_priv); +#endif /* __DRM_CRTC_H__ */ + diff --git a/linux-core/drm_crtc_helper.c b/linux-core/drm_crtc_helper.c new file mode 100644 index 00000000..bfddab99 --- /dev/null +++ b/linux-core/drm_crtc_helper.c @@ -0,0 +1,761 @@ +/* (c) 2006-2007 Intel Corporation + * Copyright (c) 2007 Dave Airlie <airlied@linux.ie> + * + * DRM core CRTC related functions + * + * Permission to use, copy, modify, distribute, and sell this software and its + * documentation for any purpose is hereby granted without fee, provided that + * the above copyright notice appear in all copies and that both that copyright + * notice and this permission notice appear in supporting documentation, and + * that the name of the copyright holders not be used in advertising or + * publicity pertaining to distribution of the software without specific, + * written prior permission. The copyright holders make no representations + * about the suitability of this software for any purpose. It is provided "as + * is" without express or implied warranty. + * + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + * + * Authors: + * Keith Packard + * Eric Anholt <eric@anholt.net> + * Dave Airlie <airlied@linux.ie> + * Jesse Barnes <jesse.barnes@intel.com> + */ + +#include "drmP.h" +#include "drm_crtc.h" +#include "drm_crtc_helper.h" + +/* + * Detailed mode info for a standard 640x480@60Hz monitor + */ +static struct drm_display_mode std_mode[] = { + { DRM_MODE("640x480", DRM_MODE_TYPE_DEFAULT, 25200, 640, 656, + 752, 800, 0, 480, 490, 492, 525, 0, + V_NHSYNC | V_NVSYNC) }, /* 640x480@60Hz */ +}; + +/** + * drm_helper_probe_connector_modes - get complete set of display modes + * @dev: DRM device + * @maxX: max width for modes + * @maxY: max height for modes + * + * LOCKING: + * Caller must hold mode config lock. + * + * Based on @dev's mode_config layout, scan all the connectors and try to detect + * modes on them. Modes will first be added to the connector's probed_modes + * list, then culled (based on validity and the @maxX, @maxY parameters) and + * put into the normal modes list. + * + * Intended to be used either at bootup time or when major configuration + * changes have occurred. + * + * FIXME: take into account monitor limits + */ +void drm_helper_probe_single_connector_modes(struct drm_connector *connector, uint32_t maxX, uint32_t maxY) +{ + struct drm_device *dev = connector->dev; + struct drm_display_mode *mode, *t; + struct drm_connector_helper_funcs *connector_funcs = connector->helper_private; + int ret; + + DRM_DEBUG("%s\n", drm_get_connector_name(connector)); + /* set all modes to the unverified state */ + list_for_each_entry_safe(mode, t, &connector->modes, head) + mode->status = MODE_UNVERIFIED; + + connector->status = (*connector->funcs->detect)(connector); + + if (connector->status == connector_status_disconnected) { + DRM_DEBUG("%s is disconnected\n", drm_get_connector_name(connector)); + /* TODO set EDID to NULL */ + return; + } + + ret = (*connector_funcs->get_modes)(connector); + + if (ret) { + drm_mode_connector_list_update(connector); + } + + if (maxX && maxY) + drm_mode_validate_size(dev, &connector->modes, maxX, + maxY, 0); + list_for_each_entry_safe(mode, t, &connector->modes, head) { + if (mode->status == MODE_OK) + mode->status = (*connector_funcs->mode_valid)(connector,mode); + } + + + drm_mode_prune_invalid(dev, &connector->modes, TRUE); + + if (list_empty(&connector->modes)) { + struct drm_display_mode *stdmode; + + DRM_DEBUG("No valid modes on %s\n", drm_get_connector_name(connector)); + + /* Should we do this here ??? + * When no valid EDID modes are available we end up + * here and bailed in the past, now we add a standard + * 640x480@60Hz mode and carry on. + */ + stdmode = drm_mode_duplicate(dev, &std_mode[0]); + drm_mode_probed_add(connector, stdmode); + drm_mode_list_concat(&connector->probed_modes, + &connector->modes); + + DRM_DEBUG("Adding standard 640x480 @ 60Hz to %s\n", + drm_get_connector_name(connector)); + } + + drm_mode_sort(&connector->modes); + + DRM_DEBUG("Probed modes for %s\n", drm_get_connector_name(connector)); + list_for_each_entry_safe(mode, t, &connector->modes, head) { + mode->vrefresh = drm_mode_vrefresh(mode); + + drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V); + drm_mode_debug_printmodeline(mode); + } +} +EXPORT_SYMBOL(drm_helper_probe_single_connector_modes); + +void drm_helper_probe_connector_modes(struct drm_device *dev, uint32_t maxX, uint32_t maxY) +{ + struct drm_connector *connector; + + list_for_each_entry(connector, &dev->mode_config.connector_list, head) { + drm_helper_probe_single_connector_modes(connector, maxX, maxY); + } +} +EXPORT_SYMBOL(drm_helper_probe_connector_modes); + + +/** + * drm_helper_crtc_in_use - check if a given CRTC is in a mode_config + * @crtc: CRTC to check + * + * LOCKING: + * Caller must hold mode config lock. + * + * Walk @crtc's DRM device's mode_config and see if it's in use. + * + * RETURNS: + * True if @crtc is part of the mode_config, false otherwise. + */ +bool drm_helper_crtc_in_use(struct drm_crtc *crtc) +{ + struct drm_encoder *encoder; + struct drm_device *dev = crtc->dev; + /* FIXME: Locking around list access? */ + list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) + if (encoder->crtc == crtc) + return true; + return false; +} +EXPORT_SYMBOL(drm_helper_crtc_in_use); + +/** + * drm_disable_unused_functions - disable unused objects + * @dev: DRM device + * + * LOCKING: + * Caller must hold mode config lock. + * + * If an connector or CRTC isn't part of @dev's mode_config, it can be disabled + * by calling its dpms function, which should power it off. + */ +void drm_helper_disable_unused_functions(struct drm_device *dev) +{ + struct drm_encoder *encoder; + struct drm_encoder_helper_funcs *encoder_funcs; + struct drm_crtc *crtc; + + list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { + encoder_funcs = encoder->helper_private; + if (!encoder->crtc) + (*encoder_funcs->dpms)(encoder, DPMSModeOff); + } + + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { + struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; + crtc->enabled = drm_helper_crtc_in_use(crtc); + if (!crtc->enabled) { + crtc_funcs->dpms(crtc, DPMSModeOff); + crtc->fb = NULL; + } + } +} +EXPORT_SYMBOL(drm_helper_disable_unused_functions); + +/** + * drm_pick_crtcs - pick crtcs for connector devices + * @dev: DRM device + * + * LOCKING: + * Caller must hold mode config lock. + */ +static void drm_pick_crtcs (struct drm_device *dev) +{ + int c, o, assigned; + struct drm_connector *connector, *connector_equal; + struct drm_encoder *encoder, *encoder_equal; + struct drm_crtc *crtc; + struct drm_display_mode *des_mode = NULL, *modes, *modes_equal; + struct drm_connector_helper_funcs *connector_funcs; + int found; + + DRM_DEBUG("\n"); + /* clean out all the encoder/crtc combos */ + list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { + encoder->crtc = NULL; + } + + list_for_each_entry(connector, &dev->mode_config.connector_list, head) { + connector_funcs = connector->helper_private; + connector->encoder = NULL; + + /* Don't hook up connectors that are disconnected ?? + * + * This is debateable. Do we want fixed /dev/fbX or + * dynamic on hotplug (need mode code for that though) ? + * + * If we don't hook up connectors now, then we only create + * /dev/fbX for the connector that's enabled, that's good as + * the users console will be on that connector. + * + * If we do hook up connectors that are disconnected now, then + * the user may end up having to muck about with the fbcon + * map flags to assign his console to the enabled connector. Ugh. + */ + if (connector->status != connector_status_connected) + continue; + + if (list_empty(&connector->modes)) + continue; + + des_mode = NULL; + found = 0; + list_for_each_entry(des_mode, &connector->modes, head) { + if (des_mode->type & DRM_MODE_TYPE_PREFERRED) { + found = 1; + break; + } + } + + /* No preferred mode, let's just select the first available */ + if (!found) { + des_mode = NULL; + list_for_each_entry(des_mode, &connector->modes, head) { + break; + } + } + + encoder = connector_funcs->best_encoder(connector); + if (!encoder) + continue; + + connector->encoder = encoder; + + c = -1; + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { + assigned = 0; + + c++; + if ((encoder->possible_crtcs & (1 << c)) == 0) + continue; + + list_for_each_entry(encoder_equal, &dev->mode_config.encoder_list, head) { + if (encoder->base.id == encoder_equal->base.id) + continue; + + /* Find out if crtc has been assigned before */ + if (encoder_equal->crtc == crtc) + assigned = 1; + } + +#if 1 /* continue for now */ + if (assigned) + continue; +#endif + + o = -1; + list_for_each_entry(connector_equal, &dev->mode_config.connector_list, head) { + o++; + if (connector->base.id == connector_equal->base.id) + continue; + + encoder_equal = connector_equal->encoder; + + if (!encoder_equal) + continue; + + list_for_each_entry(modes, &connector->modes, head) { + list_for_each_entry(modes_equal, &connector_equal->modes, head) { + if (drm_mode_equal (modes, modes_equal)) { + if ((encoder->possible_clones & encoder_equal->possible_clones) && (connector_equal->encoder->crtc == crtc)) { + printk("Cloning %s (0x%x) to %s (0x%x)\n",drm_get_connector_name(connector),encoder->possible_clones,drm_get_connector_name(connector_equal),encoder_equal->possible_clones); + des_mode = modes; + assigned = 0; + goto clone; + } + } + } + } + } + +clone: + /* crtc has been assigned skip it */ + if (assigned) + continue; + + /* Found a CRTC to attach to, do it ! */ + encoder->crtc = crtc; + encoder->crtc->desired_mode = des_mode; + connector->initial_x = 0; + connector->initial_y = 0; + DRM_DEBUG("Desired mode for CRTC %d is 0x%x:%s\n",c,des_mode->base.id, des_mode->name); + break; + } + } +} +EXPORT_SYMBOL(drm_pick_crtcs); + +/** + * drm_crtc_set_mode - set a mode + * @crtc: CRTC to program + * @mode: mode to use + * @x: width of mode + * @y: height of mode + * + * LOCKING: + * Caller must hold mode config lock. + * + * Try to set @mode on @crtc. Give @crtc and its associated connectors a chance + * to fixup or reject the mode prior to trying to set it. + * + * RETURNS: + * True if the mode was set successfully, or false otherwise. + */ +bool drm_crtc_helper_set_mode(struct drm_crtc *crtc, struct drm_display_mode *mode, + int x, int y) +{ + struct drm_device *dev = crtc->dev; + struct drm_display_mode *adjusted_mode, saved_mode; + struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; + struct drm_encoder_helper_funcs *encoder_funcs; + int saved_x, saved_y; + struct drm_encoder *encoder; + bool ret = true; + + adjusted_mode = drm_mode_duplicate(dev, mode); + + crtc->enabled = drm_helper_crtc_in_use(crtc); + + if (!crtc->enabled) + return true; + + saved_mode = crtc->mode; + saved_x = crtc->x; + saved_y = crtc->y; + + /* Update crtc values up front so the driver can rely on them for mode + * setting. + */ + crtc->mode = *mode; + crtc->x = x; + crtc->y = y; + + if (drm_mode_equal(&saved_mode, &crtc->mode)) { + if (saved_x != crtc->x || saved_y != crtc->y) { + crtc_funcs->mode_set_base(crtc, crtc->x, crtc->y); + goto done; + } + } + + /* Pass our mode to the connectors and the CRTC to give them a chance to + * adjust it according to limitations or connector properties, and also + * a chance to reject the mode entirely. + */ + list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { + + if (encoder->crtc != crtc) + continue; + encoder_funcs = encoder->helper_private; + if (!(ret = encoder_funcs->mode_fixup(encoder, mode, adjusted_mode))) { + goto done; + } + } + + if (!(ret = crtc_funcs->mode_fixup(crtc, mode, adjusted_mode))) { + goto done; + } + + /* Prepare the encoders and CRTCs before setting the mode. */ + list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { + + if (encoder->crtc != crtc) + continue; + encoder_funcs = encoder->helper_private; + /* Disable the encoders as the first thing we do. */ + encoder_funcs->prepare(encoder); + } + + crtc_funcs->prepare(crtc); + + /* Set up the DPLL and any encoders state that needs to adjust or depend + * on the DPLL. + */ + crtc_funcs->mode_set(crtc, mode, adjusted_mode, x, y); + + list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { + + if (encoder->crtc != crtc) + continue; + + DRM_INFO("%s: set mode %s %x\n", drm_get_encoder_name(encoder), mode->name, mode->base.id); + encoder_funcs = encoder->helper_private; + encoder_funcs->mode_set(encoder, mode, adjusted_mode); + } + + /* Now, enable the clocks, plane, pipe, and connectors that we set up. */ + crtc_funcs->commit(crtc); + + list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { + + if (encoder->crtc != crtc) + continue; + + encoder_funcs = encoder->helper_private; + encoder_funcs->commit(encoder); + + } + + /* XXX free adjustedmode */ + drm_mode_destroy(dev, adjusted_mode); + /* TODO */ +// if (scrn->pScreen) +// drm_crtc_set_screen_sub_pixel_order(dev); + +done: + if (!ret) { + crtc->mode = saved_mode; + crtc->x = saved_x; + crtc->y = saved_y; + } + + return ret; +} +EXPORT_SYMBOL(drm_crtc_helper_set_mode); + + +/** + * drm_crtc_helper_set_config - set a new config from userspace + * @crtc: CRTC to setup + * @crtc_info: user provided configuration + * @new_mode: new mode to set + * @connector_set: set of connectors for the new config + * @fb: new framebuffer + * + * LOCKING: + * Caller must hold mode config lock. + * + * Setup a new configuration, provided by the user in @crtc_info, and enable + * it. + * + * RETURNS: + * Zero. (FIXME) + */ +int drm_crtc_helper_set_config(struct drm_mode_set *set) +{ + struct drm_device *dev; + struct drm_crtc **save_crtcs, *new_crtc; + struct drm_encoder **save_encoders, *new_encoder; + bool save_enabled; + bool changed = false; + bool flip_or_move = false; + struct drm_connector *connector; + int count = 0, ro, fail = 0; + struct drm_crtc_helper_funcs *crtc_funcs; + int ret = 0; + + DRM_DEBUG("\n"); + + if (!set) + return -EINVAL; + + if (!set->crtc) + return -EINVAL; + + if (!set->crtc->helper_private) + return -EINVAL; + + crtc_funcs = set->crtc->helper_private; + + DRM_DEBUG("crtc: %p fb: %p connectors: %p num_connectors: %i (x, y) (%i, %i)\n", set->crtc, set->fb, set->connectors, set->num_connectors, set->x, set->y); + + dev = set->crtc->dev; + + /* save previous config */ + save_enabled = set->crtc->enabled; + + /* this is meant to be num_connector not num_crtc */ + save_crtcs = kzalloc(dev->mode_config.num_connector * sizeof(struct drm_crtc *), GFP_KERNEL); + if (!save_crtcs) + return -ENOMEM; + + save_encoders = kzalloc(dev->mode_config.num_connector * sizeof(struct drm_encoders *), GFP_KERNEL); + if (!save_encoders) { + kfree(save_crtcs); + return -ENOMEM; + } + + /* We should be able to check here if the fb has the same properties + * and then just flip_or_move it */ + if (set->crtc->fb != set->fb) { + /* if we have no fb then its a change not a flip */ + if (set->crtc->fb == NULL) + changed = true; + else + flip_or_move = true; + } + + if (set->x != set->crtc->x || set->y != set->crtc->y) + flip_or_move = true; + + if (set->mode && !drm_mode_equal(set->mode, &set->crtc->mode)) { + DRM_DEBUG("modes are different\n"); + drm_mode_debug_printmodeline(&set->crtc->mode); + drm_mode_debug_printmodeline(set->mode); + changed = true; + } + + /* a) traverse passed in connector list and get encoders for them */ + count = 0; + list_for_each_entry(connector, &dev->mode_config.connector_list, head) { + struct drm_connector_helper_funcs *connector_funcs = connector->helper_private; + save_encoders[count++] = connector->encoder; + new_encoder = connector->encoder; + for (ro = 0; ro < set->num_connectors; ro++) { + if (set->connectors[ro] == connector) { + new_encoder = connector_funcs->best_encoder(connector); + /* if we can't get an encoder for a connector + we are setting now - then fail */ + if (new_encoder == NULL) + /* don't break so fail path works correct */ + fail = 1; + break; + } + } + + if (new_encoder != connector->encoder) { + changed = true; + connector->encoder = new_encoder; + } + } + + if (fail) { + ret = -EINVAL; + goto fail_no_encoder; + } + + list_for_each_entry(connector, &dev->mode_config.connector_list, head) { + if (!connector->encoder) + continue; + + save_crtcs[count++] = connector->encoder->crtc; + + if (connector->encoder->crtc == set->crtc) + new_crtc = NULL; + else + new_crtc = connector->encoder->crtc; + + for (ro = 0; ro < set->num_connectors; ro++) { + if (set->connectors[ro] == connector) + new_crtc = set->crtc; + } + if (new_crtc != connector->encoder->crtc) { + changed = true; + connector->encoder->crtc = new_crtc; + } + } + + /* mode_set_base is not a required function */ + if (flip_or_move && !crtc_funcs->mode_set_base) + changed = true; + + if (changed) { + set->crtc->fb = set->fb; + set->crtc->enabled = (set->mode != NULL); + if (set->mode != NULL) { + DRM_DEBUG("attempting to set mode from userspace\n"); + drm_mode_debug_printmodeline(set->mode); + if (!drm_crtc_helper_set_mode(set->crtc, set->mode, set->x, + set->y)) { + ret = -EINVAL; + goto fail_set_mode; + } + /* TODO are these needed? */ + set->crtc->desired_x = set->x; + set->crtc->desired_y = set->y; + set->crtc->desired_mode = set->mode; + } + drm_helper_disable_unused_functions(dev); + } else if (flip_or_move) { + if (set->crtc->fb != set->fb) + set->crtc->fb = set->fb; + crtc_funcs->mode_set_base(set->crtc, set->x, set->y); + } + + kfree(save_encoders); + kfree(save_crtcs); + return 0; + +fail_set_mode: + set->crtc->enabled = save_enabled; + count = 0; + list_for_each_entry(connector, &dev->mode_config.connector_list, head) + connector->encoder->crtc = save_crtcs[count++]; +fail_no_encoder: + kfree(save_crtcs); + count = 0; + list_for_each_entry(connector, &dev->mode_config.connector_list, head) { + connector->encoder = save_encoders[count++]; + } + kfree(save_encoders); + return ret; + + +} +EXPORT_SYMBOL(drm_crtc_helper_set_config); + +bool drm_helper_plugged_event(struct drm_device *dev) +{ + DRM_DEBUG("\n"); + + drm_helper_probe_connector_modes(dev, dev->mode_config.max_width, dev->mode_config.max_height); + + drm_pick_crtcs(dev); + + /* alert the driver fb layer */ + dev->mode_config.funcs->fb_changed(dev); + + drm_helper_disable_unused_functions(dev); + + drm_sysfs_hotplug_event(dev); + return true; +} +/** + * drm_initial_config - setup a sane initial connector configuration + * @dev: DRM device + * @can_grow: this configuration is growable + * + * LOCKING: + * Called at init time, must take mode config lock. + * + * Scan the CRTCs and connectors and try to put together an initial setup. + * At the moment, this is a cloned configuration across all heads with + * a new framebuffer object as the backing store. + * + * RETURNS: + * Zero if everything went ok, nonzero otherwise. + */ +bool drm_helper_initial_config(struct drm_device *dev, bool can_grow) +{ + int ret = false; + + drm_helper_plugged_event(dev); + return ret; +} +EXPORT_SYMBOL(drm_helper_initial_config); + +/** + * drm_hotplug_stage_two + * @dev DRM device + * @connector hotpluged connector + * + * LOCKING. + * Caller must hold mode config lock, function might grab struct lock. + * + * Stage two of a hotplug. + * + * RETURNS: + * Zero on success, errno on failure. + */ +int drm_helper_hotplug_stage_two(struct drm_device *dev) +{ + dev->mode_config.hotplug_counter++; + + drm_helper_plugged_event(dev); + + return 0; +} +EXPORT_SYMBOL(drm_helper_hotplug_stage_two); + +int drm_helper_mode_fill_fb_struct(struct drm_framebuffer *fb, + struct drm_mode_fb_cmd *mode_cmd) +{ + fb->width = mode_cmd->width; + fb->height = mode_cmd->height; + fb->pitch = mode_cmd->pitch; + fb->bits_per_pixel = mode_cmd->bpp; + fb->depth = mode_cmd->depth; + fb->mm_handle = mode_cmd->handle; + + return 0; +} +EXPORT_SYMBOL(drm_helper_mode_fill_fb_struct); + +/** + * drm_get_buffer_object - find the buffer object for a given handle + * @dev: DRM device + * @bo: pointer to caller's buffer_object pointer + * @handle: handle to lookup + * + * LOCKING: + * Must take @dev's struct_mutex to protect buffer object lookup. + * + * Given @handle, lookup the buffer object in @dev and put it in the caller's + * @bo pointer. + * + * RETURNS: + * Zero on success, -EINVAL if the handle couldn't be found. + */ +int drm_get_buffer_object(struct drm_device *dev, struct drm_buffer_object **bo, unsigned long handle) +{ + struct drm_user_object *uo; + struct drm_hash_item *hash; + int ret; + + *bo = NULL; + + mutex_lock(&dev->struct_mutex); + ret = drm_ht_find_item(&dev->object_hash, handle, &hash); + if (ret) { + DRM_ERROR("Couldn't find handle.\n"); + ret = -EINVAL; + goto out_err; + } + + uo = drm_hash_entry(hash, struct drm_user_object, hash); + if (uo->type != drm_buffer_type) { + ret = -EINVAL; + goto out_err; + } + + *bo = drm_user_object_entry(uo, struct drm_buffer_object, base); + ret = 0; +out_err: + mutex_unlock(&dev->struct_mutex); + return ret; +} +EXPORT_SYMBOL(drm_get_buffer_object); + diff --git a/linux-core/drm_crtc_helper.h b/linux-core/drm_crtc_helper.h new file mode 100644 index 00000000..45a67f98 --- /dev/null +++ b/linux-core/drm_crtc_helper.h @@ -0,0 +1,95 @@ +/* + * Copyright © 2006 Keith Packard + * Copyright © 2007 Intel Corporation + * Jesse Barnes <jesse.barnes@intel.com> + */ + +/* + * The DRM mode setting helper functions are common code for drivers to use if they wish. + * Drivers are not forced to use this code in their implementations but it would be useful + * if they code they do use at least provides a consistent interface and operation to userspace + */ + +#ifndef __DRM_CRTC_HELPER_H__ +#define __DRM_CRTC_HELPER_H__ + +#include <linux/i2c.h> +#include <linux/spinlock.h> +#include <linux/types.h> +#include <linux/idr.h> + +#include <linux/fb.h> + +struct drm_crtc_helper_funcs { + /* + * Control power levels on the CRTC. If the mode passed in is + * unsupported, the provider must use the next lowest power level. + */ + void (*dpms)(struct drm_crtc *crtc, int mode); + void (*prepare)(struct drm_crtc *crtc); + void (*commit)(struct drm_crtc *crtc); + + /* Provider can fixup or change mode timings before modeset occurs */ + bool (*mode_fixup)(struct drm_crtc *crtc, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode); + /* Actually set the mode */ + void (*mode_set)(struct drm_crtc *crtc, struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode, int x, int y); + + /* Move the crtc on the current fb to the given position *optional* */ + void (*mode_set_base)(struct drm_crtc *crtc, int x, int y); +}; + +struct drm_encoder_helper_funcs { + void (*dpms)(struct drm_encoder *encoder, int mode); + void (*save)(struct drm_encoder *encoder); + void (*restore)(struct drm_encoder *encoder); + + bool (*mode_fixup)(struct drm_encoder *encoder, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode); + void (*prepare)(struct drm_encoder *encoder); + void (*commit)(struct drm_encoder *encoder); + void (*mode_set)(struct drm_encoder *encoder, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode); +}; + +struct drm_connector_helper_funcs { + int (*get_modes)(struct drm_connector *connector); + int (*mode_valid)(struct drm_connector *connector, + struct drm_display_mode *mode); + struct drm_encoder *(*best_encoder)(struct drm_connector *connector); +}; + +extern void drm_helper_probe_single_connector_modes(struct drm_connector *connector, uint32_t maxX, uint32_t maxY); +extern void drm_helper_disable_unused_functions(struct drm_device *dev); +extern int drm_helper_hotplug_stage_two(struct drm_device *dev); +extern bool drm_helper_initial_config(struct drm_device *dev, bool can_grow); +extern int drm_crtc_helper_set_config(struct drm_mode_set *set); +extern bool drm_crtc_helper_set_mode(struct drm_crtc *crtc, struct drm_display_mode *mode, + int x, int y); +extern bool drm_helper_crtc_in_use(struct drm_crtc *crtc); + +extern int drm_helper_mode_fill_fb_struct(struct drm_framebuffer *fb, + struct drm_mode_fb_cmd *mode_cmd); + +static inline void drm_crtc_helper_add(struct drm_crtc *crtc, const struct drm_crtc_helper_funcs *funcs) +{ + crtc->helper_private = (void *)funcs; +} + +static inline void drm_encoder_helper_add(struct drm_encoder *encoder, const struct drm_encoder_helper_funcs *funcs) +{ + encoder->helper_private = (void *)funcs; +} + +static inline void drm_connector_helper_add(struct drm_connector *connector, const struct drm_connector_helper_funcs *funcs) +{ + connector->helper_private = (void *)funcs; +} + +extern int drm_get_buffer_object(struct drm_device *dev, struct drm_buffer_object **bo, unsigned long handle); + +#endif diff --git a/linux-core/drm_drv.c b/linux-core/drm_drv.c index edc1f057..df09e72b 100644 --- a/linux-core/drm_drv.c +++ b/linux-core/drm_drv.c @@ -56,26 +56,29 @@ static int drm_version(struct drm_device *dev, void *data, /** Ioctl table */ static struct drm_ioctl_desc drm_ioctls[] = { - DRM_IOCTL_DEF(DRM_IOCTL_VERSION, drm_version, 0), + DRM_IOCTL_DEF(DRM_IOCTL_VERSION, drm_version, DRM_CONTROL_ALLOW), DRM_IOCTL_DEF(DRM_IOCTL_GET_UNIQUE, drm_getunique, 0), DRM_IOCTL_DEF(DRM_IOCTL_GET_MAGIC, drm_getmagic, 0), - DRM_IOCTL_DEF(DRM_IOCTL_IRQ_BUSID, drm_irq_by_busid, DRM_MASTER|DRM_ROOT_ONLY), + DRM_IOCTL_DEF(DRM_IOCTL_IRQ_BUSID, drm_irq_by_busid, DRM_MASTER), DRM_IOCTL_DEF(DRM_IOCTL_GET_MAP, drm_getmap, 0), DRM_IOCTL_DEF(DRM_IOCTL_GET_CLIENT, drm_getclient, 0), DRM_IOCTL_DEF(DRM_IOCTL_GET_STATS, drm_getstats, 0), - DRM_IOCTL_DEF(DRM_IOCTL_SET_VERSION, drm_setversion, DRM_MASTER|DRM_ROOT_ONLY), + DRM_IOCTL_DEF(DRM_IOCTL_SET_VERSION, drm_setversion, DRM_MASTER), - DRM_IOCTL_DEF(DRM_IOCTL_SET_UNIQUE, drm_setunique, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), + DRM_IOCTL_DEF(DRM_IOCTL_SET_UNIQUE, drm_setunique, DRM_AUTH|DRM_MASTER), DRM_IOCTL_DEF(DRM_IOCTL_BLOCK, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), DRM_IOCTL_DEF(DRM_IOCTL_UNBLOCK, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), - DRM_IOCTL_DEF(DRM_IOCTL_AUTH_MAGIC, drm_authmagic, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), + DRM_IOCTL_DEF(DRM_IOCTL_AUTH_MAGIC, drm_authmagic, DRM_AUTH|DRM_MASTER), - DRM_IOCTL_DEF(DRM_IOCTL_ADD_MAP, drm_addmap_ioctl, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), + DRM_IOCTL_DEF(DRM_IOCTL_ADD_MAP, drm_addmap_ioctl, DRM_AUTH|DRM_MASTER), DRM_IOCTL_DEF(DRM_IOCTL_RM_MAP, drm_rmmap_ioctl, DRM_AUTH), DRM_IOCTL_DEF(DRM_IOCTL_SET_SAREA_CTX, drm_setsareactx, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), DRM_IOCTL_DEF(DRM_IOCTL_GET_SAREA_CTX, drm_getsareactx, DRM_AUTH), + DRM_IOCTL_DEF(DRM_IOCTL_SET_MASTER, drm_setmaster_ioctl, DRM_ROOT_ONLY), + DRM_IOCTL_DEF(DRM_IOCTL_DROP_MASTER, drm_dropmaster_ioctl, DRM_ROOT_ONLY), + DRM_IOCTL_DEF(DRM_IOCTL_ADD_CTX, drm_addctx, DRM_AUTH|DRM_ROOT_ONLY), DRM_IOCTL_DEF(DRM_IOCTL_RM_CTX, drm_rmctx, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), DRM_IOCTL_DEF(DRM_IOCTL_MOD_CTX, drm_modctx, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), @@ -100,7 +103,7 @@ static struct drm_ioctl_desc drm_ioctls[] = { /* The DRM_IOCTL_DMA ioctl should be defined by the driver. */ DRM_IOCTL_DEF(DRM_IOCTL_DMA, NULL, DRM_AUTH), - DRM_IOCTL_DEF(DRM_IOCTL_CONTROL, drm_control, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), + DRM_IOCTL_DEF(DRM_IOCTL_CONTROL, drm_control, DRM_AUTH|DRM_MASTER), #if __OS_HAS_AGP DRM_IOCTL_DEF(DRM_IOCTL_AGP_ACQUIRE, drm_agp_acquire_ioctl, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), @@ -121,6 +124,28 @@ static struct drm_ioctl_desc drm_ioctls[] = { DRM_IOCTL_DEF(DRM_IOCTL_UPDATE_DRAW, drm_update_drawable_info, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), + DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETRESOURCES, drm_mode_getresources, DRM_MASTER|DRM_CONTROL_ALLOW), + DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETCRTC, drm_mode_getcrtc, DRM_MASTER|DRM_CONTROL_ALLOW), + DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETCONNECTOR, drm_mode_getconnector, DRM_MASTER|DRM_CONTROL_ALLOW), + DRM_IOCTL_DEF(DRM_IOCTL_MODE_SETCRTC, drm_mode_setcrtc, DRM_MASTER|DRM_CONTROL_ALLOW), + DRM_IOCTL_DEF(DRM_IOCTL_MODE_CURSOR, drm_mode_cursor_ioctl, DRM_MASTER|DRM_CONTROL_ALLOW), + DRM_IOCTL_DEF(DRM_IOCTL_MODE_ADDFB, drm_mode_addfb, DRM_MASTER|DRM_CONTROL_ALLOW), + DRM_IOCTL_DEF(DRM_IOCTL_MODE_RMFB, drm_mode_rmfb, DRM_MASTER|DRM_CONTROL_ALLOW), + DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETFB, drm_mode_getfb, DRM_MASTER|DRM_CONTROL_ALLOW), + + DRM_IOCTL_DEF(DRM_IOCTL_MODE_SETPROPERTY, drm_mode_connector_property_set_ioctl, DRM_MASTER|DRM_CONTROL_ALLOW), + DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETPROPBLOB, drm_mode_getblob_ioctl, DRM_MASTER|DRM_CONTROL_ALLOW), + DRM_IOCTL_DEF(DRM_IOCTL_MODE_ATTACHMODE, drm_mode_attachmode_ioctl, DRM_MASTER|DRM_CONTROL_ALLOW), + DRM_IOCTL_DEF(DRM_IOCTL_MODE_DETACHMODE, drm_mode_detachmode_ioctl, DRM_MASTER|DRM_CONTROL_ALLOW), + DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETPROPERTY, drm_mode_getproperty_ioctl, DRM_MASTER | DRM_CONTROL_ALLOW), + DRM_IOCTL_DEF(DRM_IOCTL_MODE_HOTPLUG, drm_mode_hotplug_ioctl, DRM_CONTROL_ALLOW), + DRM_IOCTL_DEF(DRM_IOCTL_WAIT_HOTPLUG, drm_wait_hotplug, 0), + + DRM_IOCTL_DEF(DRM_IOCTL_MODE_REPLACEFB, drm_mode_replacefb, DRM_MASTER|DRM_ROOT_ONLY|DRM_CONTROL_ALLOW), + DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETENCODER, drm_mode_getencoder, DRM_MASTER|DRM_ROOT_ONLY|DRM_CONTROL_ALLOW), + DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETGAMMA, drm_mode_gamma_get_ioctl, DRM_MASTER), + DRM_IOCTL_DEF(DRM_IOCTL_MODE_SETGAMMA, drm_mode_gamma_set_ioctl, DRM_MASTER), + DRM_IOCTL_DEF(DRM_IOCTL_MM_INIT, drm_mm_init_ioctl, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), DRM_IOCTL_DEF(DRM_IOCTL_MM_TAKEDOWN, drm_mm_takedown_ioctl, @@ -175,31 +200,25 @@ static struct drm_ioctl_desc drm_ioctls[] = { */ int drm_lastclose(struct drm_device * dev) { - struct drm_magic_entry *pt, *next; - struct drm_map_list *r_list, *list_t; struct drm_vma_entry *vma, *vma_temp; int i; DRM_DEBUG("\n"); + if (!drm_core_check_feature(dev, DRIVER_MODESET)) + drm_bo_driver_finish(dev); + /* * We can't do much about this function failing. */ - drm_bo_driver_finish(dev); - if (dev->driver->lastclose) dev->driver->lastclose(dev); DRM_DEBUG("driver lastclose completed\n"); - if (dev->unique) { - drm_free(dev->unique, strlen(dev->unique) + 1, DRM_MEM_DRIVER); - dev->unique = NULL; - dev->unique_len = 0; - } - if (dev->irq_enabled) - drm_irq_uninstall(dev); +/* if (dev->irq_enabled) + drm_irq_uninstall(dev); */ /* Free drawable information memory */ mutex_lock(&dev->struct_mutex); @@ -207,22 +226,11 @@ int drm_lastclose(struct drm_device * dev) drm_drawable_free_all(dev); del_timer(&dev->timer); - if (dev->unique) { - drm_free(dev->unique, strlen(dev->unique) + 1, DRM_MEM_DRIVER); - dev->unique = NULL; - dev->unique_len = 0; + if (dev->primary->master) { + drm_put_master(dev->primary->master); + dev->primary->master = NULL; } - - if (dev->magicfree.next) { - list_for_each_entry_safe(pt, next, &dev->magicfree, head) { - list_del(&pt->head); - drm_ht_remove_item(&dev->magiclist, &pt->hash_item); - drm_free(pt, sizeof(*pt), DRM_MEM_MAGIC); - } - drm_ht_remove(&dev->magiclist); - } - - + /* Clear AGP information */ if (drm_core_has_AGP(dev) && dev->agp) { struct drm_agp_mem *entry, *tempe; @@ -254,12 +262,13 @@ int drm_lastclose(struct drm_device * dev) drm_ctl_free(vma, sizeof(*vma), DRM_MEM_VMAS); } + /* list_for_each_entry_safe(r_list, list_t, &dev->maplist, head) { if (!(r_list->map->flags & _DRM_DRIVER)) { drm_rmmap_locked(dev, r_list->map); r_list = NULL; } - } + }*/ if (drm_core_check_feature(dev, DRIVER_DMA_QUEUE) && dev->queuelist) { for (i = 0; i < dev->queue_count; i++) { @@ -281,11 +290,6 @@ int drm_lastclose(struct drm_device * dev) if (drm_core_check_feature(dev, DRIVER_HAVE_DMA)) drm_dma_takedown(dev); - if (dev->lock.hw_lock) { - dev->sigdata.lock = dev->lock.hw_lock = NULL; /* SHM removed */ - dev->lock.file_priv = NULL; - wake_up_interruptible(&dev->lock.lock_queue); - } dev->dev_mapping = NULL; mutex_unlock(&dev->struct_mutex); @@ -412,12 +416,14 @@ static void drm_cleanup(struct drm_device * dev) DRM_DEBUG("mtrr_del=%d\n", retval); } + if (dev->driver->unload) + dev->driver->unload(dev); + + drm_ht_remove(&dev->map_hash); if (drm_core_has_AGP(dev) && dev->agp) { drm_free(dev->agp, sizeof(*dev->agp), DRM_MEM_AGPLISTS); dev->agp = NULL; } - if (dev->driver->unload) - dev->driver->unload(dev); if (!drm_fb_loaded) pci_disable_device(dev->pdev); @@ -428,6 +434,8 @@ static void drm_cleanup(struct drm_device * dev) drm_ht_remove(&dev->object_hash); drm_put_minor(&dev->primary); + if (drm_core_check_feature(dev, DRIVER_MODESET)) + drm_put_minor(&dev->control); if (drm_put_dev(dev)) DRM_ERROR("Cannot unload module\n"); } @@ -442,8 +450,14 @@ int drm_minors_cleanup(int id, void *ptr, void *data) if (minor->dev->driver != driver) return 0; - if (minor->type != DRM_MINOR_LEGACY) - return 0; + if (drm_core_check_feature(dev, DRIVER_MODESET)) { + if (minor->type != DRM_MINOR_CONTROL) + return 0; + } else { + if (minor->type != DRM_MINOR_LEGACY) + return 0; + } + if (dev) pci_dev_put(dev->pdev); @@ -628,6 +642,7 @@ long drm_unlocked_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) retcode = -EINVAL; goto err_i1; } + #if 0 /* * This check is disabled, because driver private ioctl->cmd @@ -648,7 +663,7 @@ long drm_unlocked_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) if (cmd & IOC_IN) { if (copy_from_user(kdata, (void __user *)arg, _IOC_SIZE(cmd)) != 0) { - retcode = -EACCES; + retcode = -EFAULT; goto err_i1; } } @@ -658,7 +673,8 @@ long drm_unlocked_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) retcode = -EINVAL; } else if (((ioctl->flags & DRM_ROOT_ONLY) && !capable(CAP_SYS_ADMIN)) || ((ioctl->flags & DRM_AUTH) && !file_priv->authenticated) || - ((ioctl->flags & DRM_MASTER) && !file_priv->master)) { + ((ioctl->flags & DRM_MASTER) && !file_priv->master) || + ((!(ioctl->flags & DRM_CONTROL_ALLOW)) && (file_priv->minor->type == DRM_MINOR_CONTROL)) ) { retcode = -EACCES; } else { retcode = func(dev, kdata, file_priv); @@ -667,13 +683,13 @@ long drm_unlocked_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) if ((retcode == 0) && (cmd & IOC_OUT)) { if (copy_to_user((void __user *)arg, kdata, _IOC_SIZE(cmd)) != 0) - retcode = -EACCES; + retcode = -EFAULT; } err_i1: atomic_dec(&dev->ioctl_count); if (retcode) - DRM_DEBUG("ret = %d\n", retcode); + DRM_ERROR("ret = %x %d\n", nr, retcode); return retcode; } EXPORT_SYMBOL(drm_unlocked_ioctl); diff --git a/linux-core/drm_edid.c b/linux-core/drm_edid.c new file mode 100644 index 00000000..0d600396 --- /dev/null +++ b/linux-core/drm_edid.c @@ -0,0 +1,733 @@ +/* + * Copyright (c) 2006 Luc Verhaegen (quirks list) + * Copyright (c) 2007 Intel Corporation + * Jesse Barnes <jesse.barnes@intel.com> + * + * DDC probing routines (drm_ddc_read & drm_do_probe_ddc_edid) originally from + * FB layer. + * Copyright (C) 2006 Dennis Munsie <dmunsie@cecropia.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sub license, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + */ +#include <linux/kernel.h> +#include <linux/i2c.h> +#include <linux/i2c-algo-bit.h> +#include "drmP.h" +#include "drm_edid.h" + +/* + * TODO: + * - support EDID 1.4 + * - port quirks from X server code + */ + +/* + * EDID blocks out in the wild have a variety of bugs, try to collect + * them here (note that userspace may work around broken monitors first, + * but fixes should make their way here so that the kernel "just works" + * on as many displays as possible). + */ + +/* First detailed mode wrong, use largest 60Hz mode */ +#define EDID_QUIRK_PREFER_LARGE_60 (1 << 0) +/* Reported 135MHz pixel clock is too high, needs adjustment */ +#define EDID_QUIRK_135_CLOCK_TOO_HIGH (1 << 1) +/* Prefer the largest mode at 75 Hz */ +#define EDID_QUIRK_PREFER_LARGE_75 (1 << 2) +/* Detail timing is in cm not mm */ +#define EDID_QUIRK_DETAILED_IN_CM (1 << 3) +/* Detailed timing descriptors have bogus size values, so just take the + * maximum size and use that. + */ +#define EDID_QUIRK_DETAILED_USE_MAXIMUM_SIZE (1 << 4) +/* Monitor forgot to set the first detailed is preferred bit. */ +#define EDID_QUIRK_FIRST_DETAILED_PREFERRED (1 << 5) +/* use +hsync +vsync for detailed mode */ +#define EDID_QUIRK_DETAILED_SYNC_PP (1 << 6) + +static struct edid_quirk { + char *vendor; + int product_id; + u32 quirks; +} edid_quirk_list[] = { + /* Acer AL1706 */ + { "ACR", 44358, EDID_QUIRK_PREFER_LARGE_60 }, + /* Acer F51 */ + { "API", 0x7602, EDID_QUIRK_PREFER_LARGE_60 }, + /* Unknown Acer */ + { "ACR", 2423, EDID_QUIRK_FIRST_DETAILED_PREFERRED }, + + /* Belinea 10 15 55 */ + { "MAX", 1516, EDID_QUIRK_PREFER_LARGE_60 }, + { "MAX", 0x77e, EDID_QUIRK_PREFER_LARGE_60 }, + + /* Envision Peripherals, Inc. EN-7100e */ + { "EPI", 59264, EDID_QUIRK_135_CLOCK_TOO_HIGH }, + + /* Funai Electronics PM36B */ + { "FCM", 13600, EDID_QUIRK_PREFER_LARGE_75 | + EDID_QUIRK_DETAILED_IN_CM }, + + /* LG Philips LCD LP154W01-A5 */ + { "LPL", 0, EDID_QUIRK_DETAILED_USE_MAXIMUM_SIZE }, + { "LPL", 0x2a00, EDID_QUIRK_DETAILED_USE_MAXIMUM_SIZE }, + + /* Philips 107p5 CRT */ + { "PHL", 57364, EDID_QUIRK_FIRST_DETAILED_PREFERRED }, + + /* Proview AY765C */ + { "PTS", 765, EDID_QUIRK_FIRST_DETAILED_PREFERRED }, + + /* Samsung SyncMaster 205BW. Note: irony */ + { "SAM", 541, EDID_QUIRK_DETAILED_SYNC_PP }, + /* Samsung SyncMaster 22[5-6]BW */ + { "SAM", 596, EDID_QUIRK_PREFER_LARGE_60 }, + { "SAM", 638, EDID_QUIRK_PREFER_LARGE_60 }, +}; + + +/* Valid EDID header has these bytes */ +static u8 edid_header[] = { 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00 }; + +/** + * edid_is_valid - sanity check EDID data + * @edid: EDID data + * + * Sanity check the EDID block by looking at the header, the version number + * and the checksum. Return 0 if the EDID doesn't check out, or 1 if it's + * valid. + */ +static bool edid_is_valid(struct edid *edid) +{ + int i; + u8 csum = 0; + u8 *raw_edid = (u8 *)edid; + + if (memcmp(edid->header, edid_header, sizeof(edid_header))) + goto bad; + if (edid->version != 1) + goto bad; + if (edid->revision <= 0 || edid->revision > 3) + goto bad; + + for (i = 0; i < EDID_LENGTH; i++) + csum += raw_edid[i]; + if (csum) + goto bad; + + return 1; + +bad: + return 0; +} + +/** + * edid_vendor - match a string against EDID's obfuscated vendor field + * @edid: EDID to match + * @vendor: vendor string + * + * Returns true if @vendor is in @edid, false otherwise + */ +static bool edid_vendor(struct edid *edid, char *vendor) +{ + char edid_vendor[3]; + + edid_vendor[0] = ((edid->mfg_id[0] & 0x7c) >> 2) + '@'; + edid_vendor[1] = (((edid->mfg_id[0] & 0x3) << 3) | + ((edid->mfg_id[1] & 0xe0) >> 5)) + '@'; + edid_vendor[2] = (edid->mfg_id[2] & 0x1f) + '@'; + + return !strncmp(edid_vendor, vendor, 3); +} + +/** + * edid_get_quirks - return quirk flags for a given EDID + * @edid: EDID to process + * + * This tells subsequent routines what fixes they need to apply. + */ +static u32 edid_get_quirks(struct edid *edid) +{ + struct edid_quirk *quirk; + int i; + + for (i = 0; i < ARRAY_SIZE(edid_quirk_list); i++) { + quirk = &edid_quirk_list[i]; + + if (edid_vendor(edid, quirk->vendor) && + (EDID_PRODUCT_ID(edid) == quirk->product_id)) + return quirk->quirks; + } + + return 0; +} + +#define MODE_SIZE(m) ((m)->hdisplay * (m)->vdisplay) +#define MODE_REFRESH_DIFF(m,r) (abs((m)->vrefresh - target_refresh)) + + +/** + * edid_fixup_preferred - set preferred modes based on quirk list + * @connector: has mode list to fix up + * @quirks: quirks list + * + * Walk the mode list for @connector, clearing the preferred status + * on existing modes and setting it anew for the right mode ala @quirks. + */ +static void edid_fixup_preferred(struct drm_connector *connector, + u32 quirks) +{ + struct drm_display_mode *t, *cur_mode, *preferred_mode; + int target_refresh; + + if (list_empty(&connector->probed_modes)) + return; + + if (quirks & EDID_QUIRK_PREFER_LARGE_60) + target_refresh = 60; + if (quirks & EDID_QUIRK_PREFER_LARGE_75) + target_refresh = 75; + + preferred_mode = list_first_entry(&connector->probed_modes, + struct drm_display_mode, head); + + list_for_each_entry_safe(cur_mode, t, &connector->probed_modes, head) { + cur_mode->type &= ~DRM_MODE_TYPE_PREFERRED; + + if (cur_mode == preferred_mode) + continue; + + /* Largest mode is preferred */ + if (MODE_SIZE(cur_mode) > MODE_SIZE(preferred_mode)) + preferred_mode = cur_mode; + + /* At a given size, try to get closest to target refresh */ + if ((MODE_SIZE(cur_mode) == MODE_SIZE(preferred_mode)) && + MODE_REFRESH_DIFF(cur_mode, target_refresh) < + MODE_REFRESH_DIFF(preferred_mode, target_refresh)) { + preferred_mode = cur_mode; + } + } + + preferred_mode->type |= DRM_MODE_TYPE_PREFERRED; +} + +/** + * drm_mode_std - convert standard mode info (width, height, refresh) into mode + * @t: standard timing params + * + * Take the standard timing params (in this case width, aspect, and refresh) + * and convert them into a real mode using CVT. + * + * Punts for now, but should eventually use the FB layer's CVT based mode + * generation code. + */ +struct drm_display_mode *drm_mode_std(struct drm_device *dev, + struct std_timing *t) +{ +// struct fb_videomode mode; + +// fb_find_mode_cvt(&mode, 0, 0); + /* JJJ: convert to drm_display_mode */ + struct drm_display_mode *mode; + int hsize = t->hsize * 8 + 248, vsize; + + mode = drm_mode_create(dev); + if (!mode) + return NULL; + + if (t->aspect_ratio == 0) + vsize = (hsize * 10) / 16; + else if (t->aspect_ratio == 1) + vsize = (hsize * 3) / 4; + else if (t->aspect_ratio == 2) + vsize = (hsize * 4) / 5; + else + vsize = (hsize * 9) / 16; + + drm_mode_set_name(mode); + + return mode; +} + +/** + * drm_mode_detailed - create a new mode from an EDID detailed timing section + * @dev: DRM device (needed to create new mode) + * @edid: EDID block + * @timing: EDID detailed timing info + * @quirks: quirks to apply + * + * An EDID detailed timing block contains enough info for us to create and + * return a new struct drm_display_mode. + */ +static struct drm_display_mode *drm_mode_detailed(struct drm_device *dev, + struct edid *edid, + struct detailed_timing *timing, + u32 quirks) +{ + struct drm_display_mode *mode; + struct detailed_pixel_timing *pt = &timing->data.pixel_data; + + if (pt->stereo) { + printk(KERN_WARNING "stereo mode not supported\n"); + return NULL; + } + if (!pt->separate_sync) { + printk(KERN_WARNING "integrated sync not supported\n"); + return NULL; + } + + mode = drm_mode_create(dev); + if (!mode) + return NULL; + + mode->type = DRM_MODE_TYPE_DRIVER; + + if (quirks & EDID_QUIRK_135_CLOCK_TOO_HIGH) + timing->pixel_clock = 1088; + + mode->clock = timing->pixel_clock * 10; + + mode->hdisplay = (pt->hactive_hi << 8) | pt->hactive_lo; + mode->hsync_start = mode->hdisplay + ((pt->hsync_offset_hi << 8) | + pt->hsync_offset_lo); + mode->hsync_end = mode->hsync_start + + ((pt->hsync_pulse_width_hi << 8) | + pt->hsync_pulse_width_lo); + mode->htotal = mode->hdisplay + ((pt->hblank_hi << 8) | pt->hblank_lo); + + mode->vdisplay = (pt->vactive_hi << 8) | pt->vactive_lo; + mode->vsync_start = mode->vdisplay + ((pt->vsync_offset_hi << 8) | + pt->vsync_offset_lo); + mode->vsync_end = mode->vsync_start + + ((pt->vsync_pulse_width_hi << 8) | + pt->vsync_pulse_width_lo); + mode->vtotal = mode->vdisplay + ((pt->vblank_hi << 8) | pt->vblank_lo); + + drm_mode_set_name(mode); + + if (pt->interlaced) + mode->flags |= V_INTERLACE; + + if (quirks & EDID_QUIRK_DETAILED_SYNC_PP) { + pt->hsync_positive = 1; + pt->vsync_positive = 1; + } + + mode->flags |= pt->hsync_positive ? V_PHSYNC : V_NHSYNC; + mode->flags |= pt->vsync_positive ? V_PVSYNC : V_NVSYNC; + + mode->width_mm = pt->width_mm_lo | (pt->width_mm_hi << 8); + mode->height_mm = pt->height_mm_lo | (pt->height_mm_hi << 8); + + if (quirks & EDID_QUIRK_DETAILED_IN_CM) { + mode->width_mm *= 10; + mode->height_mm *= 10; + } + + if (quirks & EDID_QUIRK_DETAILED_USE_MAXIMUM_SIZE) { + mode->width_mm = edid->width_cm * 10; + mode->height_mm = edid->height_cm * 10; + } + + return mode; +} + +/* + * Detailed mode info for the EDID "established modes" data to use. + */ +static struct drm_display_mode edid_est_modes[] = { + { DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 40000, 800, 840, + 968, 1056, 0, 600, 601, 605, 628, 0, + V_PHSYNC | V_PVSYNC) }, /* 800x600@60Hz */ + { DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 36000, 800, 824, + 896, 1024, 0, 600, 601, 603, 625, 0, + V_PHSYNC | V_PVSYNC) }, /* 800x600@56Hz */ + { DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 31500, 640, 656, + 720, 840, 0, 480, 481, 484, 500, 0, + V_NHSYNC | V_NVSYNC) }, /* 640x480@75Hz */ + { DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 31500, 640, 664, + 704, 832, 0, 480, 489, 491, 520, 0, + V_NHSYNC | V_NVSYNC) }, /* 640x480@72Hz */ + { DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 30240, 640, 704, + 768, 864, 0, 480, 483, 486, 525, 0, + V_NHSYNC | V_NVSYNC) }, /* 640x480@67Hz */ + { DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 25200, 640, 656, + 752, 800, 0, 480, 490, 492, 525, 0, + V_NHSYNC | V_NVSYNC) }, /* 640x480@60Hz */ + { DRM_MODE("720x400", DRM_MODE_TYPE_DRIVER, 35500, 720, 738, + 846, 900, 0, 400, 421, 423, 449, 0, + V_NHSYNC | V_NVSYNC) }, /* 720x400@88Hz */ + { DRM_MODE("720x400", DRM_MODE_TYPE_DRIVER, 28320, 720, 738, + 846, 900, 0, 400, 412, 414, 449, 0, + V_NHSYNC | V_PVSYNC) }, /* 720x400@70Hz */ + { DRM_MODE("1280x1024", DRM_MODE_TYPE_DRIVER, 135000, 1280, 1296, + 1440, 1688, 0, 1024, 1025, 1028, 1066, 0, + V_PHSYNC | V_PVSYNC) }, /* 1280x1024@75Hz */ + { DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 78800, 1024, 1040, + 1136, 1312, 0, 768, 769, 772, 800, 0, + V_PHSYNC | V_PVSYNC) }, /* 1024x768@75Hz */ + { DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 75000, 1024, 1048, + 1184, 1328, 0, 768, 771, 777, 806, 0, + V_NHSYNC | V_NVSYNC) }, /* 1024x768@70Hz */ + { DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 65000, 1024, 1048, + 1184, 1344, 0, 768, 771, 777, 806, 0, + V_NHSYNC | V_NVSYNC) }, /* 1024x768@60Hz */ + { DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER,44900, 1024, 1032, + 1208, 1264, 0, 768, 768, 776, 817, 0, + V_PHSYNC | V_PVSYNC | V_INTERLACE) }, /* 1024x768@43Hz */ + { DRM_MODE("832x624", DRM_MODE_TYPE_DRIVER, 57284, 832, 864, + 928, 1152, 0, 624, 625, 628, 667, 0, + V_NHSYNC | V_NVSYNC) }, /* 832x624@75Hz */ + { DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 49500, 800, 816, + 896, 1056, 0, 600, 601, 604, 625, 0, + V_PHSYNC | V_PVSYNC) }, /* 800x600@75Hz */ + { DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 50000, 800, 856, + 976, 1040, 0, 600, 637, 643, 666, 0, + V_PHSYNC | V_PVSYNC) }, /* 800x600@72Hz */ + { DRM_MODE("1152x864", DRM_MODE_TYPE_DRIVER, 108000, 1152, 1216, + 1344, 1600, 0, 864, 865, 868, 900, 0, + V_PHSYNC | V_PVSYNC) }, /* 1152x864@75Hz */ +}; + +#define EDID_EST_TIMINGS 16 +#define EDID_STD_TIMINGS 8 +#define EDID_DETAILED_TIMINGS 4 + +/** + * add_established_modes - get est. modes from EDID and add them + * @edid: EDID block to scan + * + * Each EDID block contains a bitmap of the supported "established modes" list + * (defined above). Tease them out and add them to the global modes list. + */ +static int add_established_modes(struct drm_connector *connector, struct edid *edid) +{ + struct drm_device *dev = connector->dev; + unsigned long est_bits = edid->established_timings.t1 | + (edid->established_timings.t2 << 8) | + ((edid->established_timings.mfg_rsvd & 0x80) << 9); + int i, modes = 0; + + for (i = 0; i <= EDID_EST_TIMINGS; i++) + if (est_bits & (1<<i)) { + struct drm_display_mode *newmode; + newmode = drm_mode_duplicate(dev, &edid_est_modes[i]); + if (newmode) { + drm_mode_probed_add(connector, newmode); + modes++; + } + } + + return modes; +} + +/** + * add_standard_modes - get std. modes from EDID and add them + * @edid: EDID block to scan + * + * Standard modes can be calculated using the CVT standard. Grab them from + * @edid, calculate them, and add them to the list. + */ +static int add_standard_modes(struct drm_connector *connector, struct edid *edid) +{ + struct drm_device *dev = connector->dev; + int i, modes = 0; + + for (i = 0; i < EDID_STD_TIMINGS; i++) { + struct std_timing *t = &edid->standard_timings[i]; + struct drm_display_mode *newmode; + + /* If std timings bytes are 1, 1 it's empty */ + if (t->hsize == 1 && (t->aspect_ratio | t->vfreq) == 1) + continue; + + newmode = drm_mode_std(dev, &edid->standard_timings[i]); + if (newmode) { + drm_mode_probed_add(connector, newmode); + modes++; + } + } + + return modes; +} + +/** + * add_detailed_modes - get detailed mode info from EDID data + * @connector: attached connector + * @edid: EDID block to scan + * @quirks: quirks to apply + * + * Some of the detailed timing sections may contain mode information. Grab + * it and add it to the list. + */ +static int add_detailed_info(struct drm_connector *connector, + struct edid *edid, u32 quirks) +{ + struct drm_device *dev = connector->dev; + int i, j, modes = 0; + + for (i = 0; i < EDID_DETAILED_TIMINGS; i++) { + struct detailed_timing *timing = &edid->detailed_timings[i]; + struct detailed_non_pixel *data = &timing->data.other_data; + struct drm_display_mode *newmode; + + /* EDID up to and including 1.2 may put monitor info here */ + if (edid->version == 1 && edid->revision < 3) + continue; + + /* Detailed mode timing */ + if (timing->pixel_clock) { + newmode = drm_mode_detailed(dev, edid, timing, quirks); + if (!newmode) + continue; + + /* First detailed mode is preferred */ + if (i == 0 && edid->preferred_timing) + newmode->type |= DRM_MODE_TYPE_PREFERRED; + drm_mode_probed_add(connector, newmode); + + modes++; + continue; + } + + /* Other timing or info */ + switch (data->type) { + case EDID_DETAIL_MONITOR_SERIAL: + break; + case EDID_DETAIL_MONITOR_STRING: + break; + case EDID_DETAIL_MONITOR_RANGE: + /* Get monitor range data */ + break; + case EDID_DETAIL_MONITOR_NAME: + break; + case EDID_DETAIL_MONITOR_CPDATA: + break; + case EDID_DETAIL_STD_MODES: + /* Five modes per detailed section */ + for (j = 0; j < 5; i++) { + struct std_timing *std; + struct drm_display_mode *newmode; + + std = &data->data.timings[j]; + newmode = drm_mode_std(dev, std); + if (newmode) { + drm_mode_probed_add(connector, newmode); + modes++; + } + } + break; + default: + break; + } + } + + return modes; +} + +#define DDC_ADDR 0x50 + +static unsigned char *drm_do_probe_ddc_edid(struct i2c_adapter *adapter) +{ + unsigned char start = 0x0; + unsigned char *buf = kmalloc(EDID_LENGTH, GFP_KERNEL); + struct i2c_msg msgs[] = { + { + .addr = DDC_ADDR, + .flags = 0, + .len = 1, + .buf = &start, + }, { + .addr = DDC_ADDR, + .flags = I2C_M_RD, + .len = EDID_LENGTH, + .buf = buf, + } + }; + + if (!buf) { + dev_warn(&adapter->dev, "unable to allocate memory for EDID " + "block.\n"); + return NULL; + } + + if (i2c_transfer(adapter, msgs, 2) == 2) + return buf; + + dev_info(&adapter->dev, "unable to read EDID block.\n"); + kfree(buf); + return NULL; +} + +static unsigned char *drm_ddc_read(struct i2c_adapter *adapter) +{ + struct i2c_algo_bit_data *algo_data = adapter->algo_data; + unsigned char *edid = NULL; + int i, j; + + /* + * Startup the bus: + * Set clock line high (but give it time to come up) + * Then set clock & data low + */ + algo_data->setscl(algo_data->data, 1); + udelay(550); /* startup delay */ + algo_data->setscl(algo_data->data, 0); + algo_data->setsda(algo_data->data, 0); + + for (i = 0; i < 3; i++) { + /* For some old monitors we need the + * following process to initialize/stop DDC + */ + algo_data->setsda(algo_data->data, 0); + msleep(13); + + algo_data->setscl(algo_data->data, 1); + for (j = 0; j < 5; j++) { + msleep(10); + if (algo_data->getscl(algo_data->data)) + break; + } + if (j == 5) + continue; + + algo_data->setsda(algo_data->data, 0); + msleep(15); + algo_data->setscl(algo_data->data, 0); + msleep(15); + algo_data->setsda(algo_data->data, 1); + msleep(15); + + /* Do the real work */ + edid = drm_do_probe_ddc_edid(adapter); + algo_data->setsda(algo_data->data, 0); + algo_data->setscl(algo_data->data, 0); + msleep(15); + + algo_data->setscl(algo_data->data, 1); + for (j = 0; j < 10; j++) { + msleep(10); + if (algo_data->getscl(algo_data->data)) + break; + } + + algo_data->setsda(algo_data->data, 1); + msleep(15); + algo_data->setscl(algo_data->data, 0); + if (edid) + break; + } + /* Release the DDC lines when done or the Apple Cinema HD display + * will switch off + */ + algo_data->setsda(algo_data->data, 0); + algo_data->setscl(algo_data->data, 0); + algo_data->setscl(algo_data->data, 1); + + return edid; +} + +/** + * drm_get_edid - get EDID data, if available + * @connector: connector we're probing + * @adapter: i2c adapter to use for DDC + * + * Poke the given connector's i2c channel to grab EDID data if possible. + * + * Return edid data or NULL if we couldn't find any. + */ +struct edid *drm_get_edid(struct drm_connector *connector, + struct i2c_adapter *adapter) +{ + struct edid *edid; + + edid = (struct edid *)drm_ddc_read(adapter); + if (!edid) { + dev_warn(&connector->dev->pdev->dev, "%s: no EDID data\n", + drm_get_connector_name(connector)); + return NULL; + } + if (!edid_is_valid(edid)) { + dev_warn(&connector->dev->pdev->dev, "%s: EDID invalid.\n", + drm_get_connector_name(connector)); + kfree(edid); + return NULL; + } + + connector->display_info.raw_edid = (char *)edid; + + return edid; +} +EXPORT_SYMBOL(drm_get_edid); + +/** + * drm_add_edid_modes - add modes from EDID data, if available + * @connector: connector we're probing + * @edid: edid data + * + * Add the specified modes to the connector's mode list. + * + * Return number of modes added or 0 if we couldn't find any. + */ +int drm_add_edid_modes(struct drm_connector *connector, struct edid *edid) +{ + int num_modes = 0; + u32 quirks; + + if (edid == NULL) { + return 0; + } + if (!edid_is_valid(edid)) { + dev_warn(&connector->dev->pdev->dev, "%s: EDID invalid.\n", + drm_get_connector_name(connector)); + return 0; + } + + quirks = edid_get_quirks(edid); + + num_modes += add_established_modes(connector, edid); + num_modes += add_standard_modes(connector, edid); + num_modes += add_detailed_info(connector, edid, quirks); + + if (quirks & (EDID_QUIRK_PREFER_LARGE_60 | EDID_QUIRK_PREFER_LARGE_75)) + edid_fixup_preferred(connector, quirks); + + connector->display_info.serration_vsync = edid->serration_vsync; + connector->display_info.sync_on_green = edid->sync_on_green; + connector->display_info.composite_sync = edid->composite_sync; + connector->display_info.separate_syncs = edid->separate_syncs; + connector->display_info.blank_to_black = edid->blank_to_black; + connector->display_info.video_level = edid->video_level; + connector->display_info.digital = edid->digital; + connector->display_info.width_mm = edid->width_cm * 10; + connector->display_info.height_mm = edid->height_cm * 10; + connector->display_info.gamma = edid->gamma; + connector->display_info.gtf_supported = edid->default_gtf; + connector->display_info.standard_color = edid->standard_color; + connector->display_info.display_type = edid->display_type; + connector->display_info.active_off_supported = edid->pm_active_off; + connector->display_info.suspend_supported = edid->pm_suspend; + connector->display_info.standby_supported = edid->pm_standby; + connector->display_info.gamma = edid->gamma; + + return num_modes; +} +EXPORT_SYMBOL(drm_add_edid_modes); diff --git a/linux-core/drm_edid.h b/linux-core/drm_edid.h new file mode 100644 index 00000000..dccfba91 --- /dev/null +++ b/linux-core/drm_edid.h @@ -0,0 +1,178 @@ +#ifndef __DRM_EDID_H__ +#define __DRM_EDID_H__ + +#include <linux/types.h> + +#define EDID_LENGTH 128 +#define DDC_ADDR 0x50 + +#ifdef BIG_ENDIAN +#error "EDID structure is little endian, need big endian versions" +#endif + +struct est_timings { + u8 t1; + u8 t2; + u8 mfg_rsvd; +} __attribute__((packed)); + +struct std_timing { + u8 hsize; /* need to multiply by 8 then add 248 */ + u8 vfreq:6; /* need to add 60 */ + u8 aspect_ratio:2; /* 00=16:10, 01=4:3, 10=5:4, 11=16:9 */ +} __attribute__((packed)); + +/* If detailed data is pixel timing */ +struct detailed_pixel_timing { + u8 hactive_lo; + u8 hblank_lo; + u8 hblank_hi:4; + u8 hactive_hi:4; + u8 vactive_lo; + u8 vblank_lo; + u8 vblank_hi:4; + u8 vactive_hi:4; + u8 hsync_offset_lo; + u8 hsync_pulse_width_lo; + u8 vsync_pulse_width_lo:4; + u8 vsync_offset_lo:4; + u8 hsync_pulse_width_hi:2; + u8 hsync_offset_hi:2; + u8 vsync_pulse_width_hi:2; + u8 vsync_offset_hi:2; + u8 width_mm_lo; + u8 height_mm_lo; + u8 height_mm_hi:4; + u8 width_mm_hi:4; + u8 hborder; + u8 vborder; + u8 unknown0:1; + u8 vsync_positive:1; + u8 hsync_positive:1; + u8 separate_sync:2; + u8 stereo:1; + u8 unknown6:1; + u8 interlaced:1; +} __attribute__((packed)); + +/* If it's not pixel timing, it'll be one of the below */ +struct detailed_data_string { + u8 str[13]; +} __attribute__((packed)); + +struct detailed_data_monitor_range { + u8 min_vfreq; + u8 max_vfreq; + u8 min_hfreq_khz; + u8 max_hfreq_khz; + u8 pixel_clock_mhz; /* need to multiply by 10 */ + u16 sec_gtf_toggle; /* A000=use above, 20=use below */ /* FIXME: byte order */ + u8 hfreq_start_khz; /* need to multiply by 2 */ + u8 c; /* need to divide by 2 */ + u16 m; /* FIXME: byte order */ + u8 k; + u8 j; /* need to divide by 2 */ +} __attribute__((packed)); + +struct detailed_data_wpindex { + u8 white_y_lo:2; + u8 white_x_lo:2; + u8 pad:4; + u8 white_x_hi; + u8 white_y_hi; + u8 gamma; /* need to divide by 100 then add 1 */ +} __attribute__((packed)); + +struct detailed_data_color_point { + u8 windex1; + u8 wpindex1[3]; + u8 windex2; + u8 wpindex2[3]; +} __attribute__((packed)); + +struct detailed_non_pixel { + u8 pad1; + u8 type; /* ff=serial, fe=string, fd=monitor range, fc=monitor name + fb=color point data, fa=standard timing data, + f9=undefined, f8=mfg. reserved */ + u8 pad2; + union { + struct detailed_data_string str; + struct detailed_data_monitor_range range; + struct detailed_data_wpindex color; + struct std_timing timings[5]; + } data; +} __attribute__((packed)); + +#define EDID_DETAIL_STD_MODES 0xfa +#define EDID_DETAIL_MONITOR_CPDATA 0xfb +#define EDID_DETAIL_MONITOR_NAME 0xfc +#define EDID_DETAIL_MONITOR_RANGE 0xfd +#define EDID_DETAIL_MONITOR_STRING 0xfe +#define EDID_DETAIL_MONITOR_SERIAL 0xff + +struct detailed_timing { + u16 pixel_clock; /* need to multiply by 10 KHz */ /* FIXME: byte order */ + union { + struct detailed_pixel_timing pixel_data; + struct detailed_non_pixel other_data; + } data; +} __attribute__((packed)); + +struct edid { + u8 header[8]; + /* Vendor & product info */ + u8 mfg_id[2]; + u8 prod_code[2]; + u32 serial; /* FIXME: byte order */ + u8 mfg_week; + u8 mfg_year; + /* EDID version */ + u8 version; + u8 revision; + /* Display info: */ + /* input definition */ + u8 serration_vsync:1; + u8 sync_on_green:1; + u8 composite_sync:1; + u8 separate_syncs:1; + u8 blank_to_black:1; + u8 video_level:2; + u8 digital:1; /* bits below must be zero if set */ + u8 width_cm; + u8 height_cm; + u8 gamma; + /* feature support */ + u8 default_gtf:1; + u8 preferred_timing:1; + u8 standard_color:1; + u8 display_type:2; /* 00=mono, 01=rgb, 10=non-rgb, 11=unknown */ + u8 pm_active_off:1; + u8 pm_suspend:1; + u8 pm_standby:1; + /* Color characteristics */ + u8 red_green_lo; + u8 black_white_lo; + u8 red_x; + u8 red_y; + u8 green_x; + u8 green_y; + u8 blue_x; + u8 blue_y; + u8 white_x; + u8 white_y; + /* Est. timings and mfg rsvd timings*/ + struct est_timings established_timings; + /* Standard timings 1-8*/ + struct std_timing standard_timings[8]; + /* Detailing timings 1-4 */ + struct detailed_timing detailed_timings[4]; + /* Number of 128 byte ext. blocks */ + u8 extensions; + /* Checksum */ + u8 checksum; +} __attribute__((packed)); + +#define EDID_PRODUCT_ID(e) ((e)->prod_code[0] | ((e)->prod_code[1] << 8)) + +#endif /* __DRM_EDID_H__ */ diff --git a/linux-core/drm_fb.c b/linux-core/drm_fb.c new file mode 100644 index 00000000..74a4394a --- /dev/null +++ b/linux-core/drm_fb.c @@ -0,0 +1,432 @@ +/* + * Copyright © 2007 David Airlie + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Authors: + * David Airlie + */ + /* + * Modularization + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/tty.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/fb.h> +#include <linux/init.h> + +#include "drmP.h" +#include "drm_crtc.h" + +struct drmfb_par { + struct drm_device *dev; + struct drm_crtc *crtc; +}; + +static int drmfb_setcolreg(unsigned regno, unsigned red, unsigned green, + unsigned blue, unsigned transp, + struct fb_info *info) +{ + struct drmfb_par *par = info->par; + struct drm_framebuffer *fb = par->crtc->fb; + struct drm_crtc *crtc = par->crtc; + + if (regno > 255) + return 1; + + if (fb->depth == 8) { + return 0; + } + + if (regno < 16) { + switch (fb->depth) { + case 15: + fb->pseudo_palette[regno] = ((red & 0xf800) >> 1) | + ((green & 0xf800) >> 6) | + ((blue & 0xf800) >> 11); + break; + case 16: + fb->pseudo_palette[regno] = (red & 0xf800) | + ((green & 0xfc00) >> 5) | + ((blue & 0xf800) >> 11); + break; + case 24: + case 32: + fb->pseudo_palette[regno] = ((red & 0xff00) << 8) | + (green & 0xff00) | + ((blue & 0xff00) >> 8); + break; + } + } + + return 0; +} + +static int drmfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) +{ + struct drmfb_par *par = info->par; + struct drm_device *dev = par->dev; + struct drm_framebuffer *fb = par->crtc->fb; + struct drm_display_mode *drm_mode; + struct drm_output *output; + int depth; + + if (!var->pixclock) + return -EINVAL; + + /* Need to resize the fb object !!! */ + if (var->xres > fb->width || var->yres > fb->height) { + DRM_ERROR("Requested width/height is greater than current fb object %dx%d > %dx%d\n",var->xres,var->yres,fb->width,fb->height); + DRM_ERROR("Need resizing code.\n"); + return -EINVAL; + } + + switch (var->bits_per_pixel) { + case 16: + depth = (var->green.length == 6) ? 16 : 15; + break; + case 32: + depth = (var->transp.length > 0) ? 32 : 24; + break; + default: + depth = var->bits_per_pixel; + break; + } + + switch (depth) { + case 8: + var->red.offset = 0; + var->green.offset = 0; + var->blue.offset = 0; + var->red.length = 8; + var->green.length = 8; + var->blue.length = 8; + var->transp.length = 0; + var->transp.offset = 0; + break; + case 15: + var->red.offset = 10; + var->green.offset = 5; + var->blue.offset = 0; + var->red.length = 5; + var->green.length = 5; + var->blue.length = 5; + var->transp.length = 1; + var->transp.offset = 15; + break; + case 16: + var->red.offset = 11; + var->green.offset = 6; + var->blue.offset = 0; + var->red.length = 5; + var->green.length = 6; + var->blue.length = 5; + var->transp.length = 0; + var->transp.offset = 0; + break; + case 24: + var->red.offset = 16; + var->green.offset = 8; + var->blue.offset = 0; + var->red.length = 8; + var->green.length = 8; + var->blue.length = 8; + var->transp.length = 0; + var->transp.offset = 0; + break; + case 32: + var->red.offset = 16; + var->green.offset = 8; + var->blue.offset = 0; + var->red.length = 8; + var->green.length = 8; + var->blue.length = 8; + var->transp.length = 8; + var->transp.offset = 24; + break; + default: + return -EINVAL; + } + +#if 0 + /* Here we walk the output mode list and look for modes. If we haven't + * got it, then bail. Not very nice, so this is disabled. + * In the set_par code, we create our mode based on the incoming + * parameters. Nicer, but may not be desired by some. + */ + list_for_each_entry(output, &dev->mode_config.output_list, head) { + if (output->crtc == par->crtc) + break; + } + + list_for_each_entry(drm_mode, &output->modes, head) { + if (drm_mode->hdisplay == var->xres && + drm_mode->vdisplay == var->yres && + drm_mode->clock != 0) + break; + } + + if (!drm_mode) + return -EINVAL; +#endif + + return 0; +} + +/* this will let fbcon do the mode init */ +static int drmfb_set_par(struct fb_info *info) +{ + struct drmfb_par *par = info->par; + struct drm_framebuffer *fb = par->crtc->fb; + struct drm_device *dev = par->dev; + struct drm_display_mode *drm_mode; + struct fb_var_screeninfo *var = &info->var; + struct drm_output *output; + + switch (var->bits_per_pixel) { + case 16: + fb->depth = (var->green.length == 6) ? 16 : 15; + break; + case 32: + fb->depth = (var->transp.length > 0) ? 32 : 24; + break; + default: + fb->depth = var->bits_per_pixel; + break; + } + + fb->bits_per_pixel = var->bits_per_pixel; + + info->fix.line_length = fb->pitch; + info->fix.smem_len = info->fix.line_length * fb->height; + info->fix.visual = (fb->depth == 8) ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR; + + info->screen_size = info->fix.smem_len; /* ??? */ + + /* Should we walk the output's modelist or just create our own ??? + * For now, we create and destroy a mode based on the incoming + * parameters. But there's commented out code below which scans + * the output list too. + */ +#if 0 + list_for_each_entry(output, &dev->mode_config.output_list, head) { + if (output->crtc == par->crtc) + break; + } + + list_for_each_entry(drm_mode, &output->modes, head) { + if (drm_mode->hdisplay == var->xres && + drm_mode->vdisplay == var->yres && + drm_mode->clock != 0) + break; + } +#else + drm_mode = drm_mode_create(dev); + drm_mode->hdisplay = var->xres; + drm_mode->hsync_start = drm_mode->hdisplay + var->right_margin; + drm_mode->hsync_end = drm_mode->hsync_start + var->hsync_len; + drm_mode->htotal = drm_mode->hsync_end + var->left_margin; + drm_mode->vdisplay = var->yres; + drm_mode->vsync_start = drm_mode->vdisplay + var->lower_margin; + drm_mode->vsync_end = drm_mode->vsync_start + var->vsync_len; + drm_mode->vtotal = drm_mode->vsync_end + var->upper_margin; + drm_mode->clock = PICOS2KHZ(var->pixclock); + drm_mode->vrefresh = drm_mode_vrefresh(drm_mode); + drm_mode_set_name(drm_mode); + drm_mode_set_crtcinfo(drm_mode, CRTC_INTERLACE_HALVE_V); +#endif + + if (!drm_crtc_set_mode(par->crtc, drm_mode, 0, 0)) + return -EINVAL; + + /* Have to destroy our created mode if we're not searching the mode + * list for it. + */ +#if 1 + drm_mode_destroy(dev, drm_mode); +#endif + + return 0; +} + +static struct fb_ops drmfb_ops = { + .owner = THIS_MODULE, + // .fb_open = drmfb_open, + // .fb_read = drmfb_read, + // .fb_write = drmfb_write, + // .fb_release = drmfb_release, + // .fb_ioctl = drmfb_ioctl, + .fb_check_var = drmfb_check_var, + .fb_set_par = drmfb_set_par, + .fb_setcolreg = drmfb_setcolreg, + .fb_fillrect = cfb_fillrect, + .fb_copyarea = cfb_copyarea, + .fb_imageblit = cfb_imageblit, +}; + +int drmfb_probe(struct drm_device *dev, struct drm_crtc *crtc) +{ + struct fb_info *info; + struct drm_framebuffer *fb = crtc->fb; + struct drmfb_par *par; + struct device *device = &dev->pdev->dev; + struct drm_display_mode *mode = crtc->desired_mode; + int ret; + + info = framebuffer_alloc(sizeof(struct drmfb_par), device); + if (!info) + return -ENOMEM; + + fb->fbdev = info; + + par = info->par; + + par->dev = dev; + par->crtc = crtc; + + info->fbops = &drmfb_ops; + + strcpy(info->fix.id, "drmfb"); + info->fix.type = FB_TYPE_PACKED_PIXELS; + info->fix.visual = FB_VISUAL_TRUECOLOR; + info->fix.accel = FB_ACCEL_NONE; + info->fix.type_aux = 0; + info->fix.mmio_start = 0; + info->fix.mmio_len = 0; + info->fix.line_length = fb->pitch; + info->fix.smem_start = fb->offset + dev->mode_config.fb_base; + info->fix.smem_len = info->fix.line_length * fb->height; + + info->flags = FBINFO_DEFAULT; + + ret = drm_mem_reg_ioremap(dev, &fb->bo->mem, &fb->virtual_base); + if (ret) + DRM_ERROR("error mapping fb: %d\n", ret); + + info->screen_base = fb->virtual_base; + info->screen_size = info->fix.smem_len; /* ??? */ + info->pseudo_palette = fb->pseudo_palette; + info->var.xres_virtual = fb->width; + info->var.yres_virtual = fb->height; + info->var.bits_per_pixel = fb->bits_per_pixel; + info->var.xoffset = 0; + info->var.yoffset = 0; + info->var.activate = FB_ACTIVATE_NOW; + info->var.height = -1; + info->var.width = -1; + info->var.vmode = FB_VMODE_NONINTERLACED; + + info->var.xres = mode->hdisplay; + info->var.right_margin = mode->hsync_start - mode->hdisplay; + info->var.hsync_len = mode->hsync_end - mode->hsync_start; + info->var.left_margin = mode->htotal - mode->hsync_end; + info->var.yres = mode->vdisplay; + info->var.lower_margin = mode->vsync_start - mode->vdisplay; + info->var.vsync_len = mode->vsync_end - mode->vsync_start; + info->var.upper_margin = mode->vtotal - mode->vsync_end; + info->var.pixclock = 10000000 / mode->htotal * 1000 / + mode->vtotal * 100; + /* avoid overflow */ + info->var.pixclock = info->var.pixclock * 1000 / mode->vrefresh; + + DRM_DEBUG("fb depth is %d\n", fb->depth); + switch(fb->depth) { + case 8: + info->var.red.offset = 0; + info->var.green.offset = 0; + info->var.blue.offset = 0; + info->var.red.length = 8; /* 8bit DAC */ + info->var.green.length = 8; + info->var.blue.length = 8; + info->var.transp.offset = 0; + info->var.transp.length = 0; + break; + case 15: + info->var.red.offset = 10; + info->var.green.offset = 5; + info->var.blue.offset = 0; + info->var.red.length = info->var.green.length = + info->var.blue.length = 5; + info->var.transp.offset = 15; + info->var.transp.length = 1; + break; + case 16: + info->var.red.offset = 11; + info->var.green.offset = 5; + info->var.blue.offset = 0; + info->var.red.length = 5; + info->var.green.length = 6; + info->var.blue.length = 5; + info->var.transp.offset = 0; + info->var.transp.length = 0; + break; + case 24: + info->var.red.offset = 16; + info->var.green.offset = 8; + info->var.blue.offset = 0; + info->var.red.length = info->var.green.length = + info->var.blue.length = 8; + info->var.transp.offset = 0; + info->var.transp.length = 0; + break; + case 32: + info->var.red.offset = 16; + info->var.green.offset = 8; + info->var.blue.offset = 0; + info->var.red.length = info->var.green.length = + info->var.blue.length = 8; + info->var.transp.offset = 24; + info->var.transp.length = 8; + break; + default: + break; + } + + if (register_framebuffer(info) < 0) { + unregister_framebuffer(info); + return -EINVAL; + } + + printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node, + info->fix.id); + return 0; +} +EXPORT_SYMBOL(drmfb_probe); + +int drmfb_remove(struct drm_device *dev, struct drm_crtc *crtc) +{ + struct fb_info *info = fb->fbdev; + struct drm_framebuffer *fb = crtc->fb; + + if (info) { + drm_mem_reg_iounmap(dev, &fb->bo->mem, fb->virtual_base); + unregister_framebuffer(info); + framebuffer_release(info); + } + return 0; +} +EXPORT_SYMBOL(drmfb_remove); +MODULE_LICENSE("GPL"); diff --git a/linux-core/drm_fops.c b/linux-core/drm_fops.c index ec521101..3b3a0a3c 100644 --- a/linux-core/drm_fops.c +++ b/linux-core/drm_fops.c @@ -43,10 +43,8 @@ static int drm_open_helper(struct inode *inode, struct file *filp, static int drm_setup(struct drm_device * dev) { - drm_local_map_t *map; int i; int ret; - int sareapage; if (dev->driver->firstopen) { ret = dev->driver->firstopen(dev); @@ -54,14 +52,6 @@ static int drm_setup(struct drm_device * dev) return ret; } - dev->magicfree.next = NULL; - - /* prebuild the SAREA */ - sareapage = max(SAREA_MAX, PAGE_SIZE); - i = drm_addmap(dev, 0, sareapage, _DRM_SHM, _DRM_CONTAINS_LOCK, &map); - if (i != 0) - return i; - atomic_set(&dev->ioctl_count, 0); atomic_set(&dev->vma_count, 0); dev->buf_use = 0; @@ -76,11 +66,8 @@ static int drm_setup(struct drm_device * dev) for (i = 0; i < ARRAY_SIZE(dev->counts); i++) atomic_set(&dev->counts[i], 0); - drm_ht_create(&dev->magiclist, DRM_MAGIC_HASH_ORDER); - INIT_LIST_HEAD(&dev->magicfree); - dev->sigdata.lock = NULL; - init_waitqueue_head(&dev->lock.lock_queue); + dev->queue_count = 0; dev->queue_reserved = 0; dev->queue_slots = 0; @@ -260,6 +247,7 @@ static int drm_open_helper(struct inode *inode, struct file *filp, INIT_LIST_HEAD(&priv->lhead); INIT_LIST_HEAD(&priv->refd_objects); + INIT_LIST_HEAD(&priv->fbs); for (i = 0; i < _DRM_NO_REF_TYPES; ++i) { ret = drm_ht_create(&priv->refd_object_hash[i], @@ -283,10 +271,36 @@ static int drm_open_helper(struct inode *inode, struct file *filp, goto out_free; } + + /* if there is no current master make this fd it */ mutex_lock(&dev->struct_mutex); - if (list_empty(&dev->filelist)) - priv->master = 1; + if (!priv->minor->master) { + priv->minor->master = drm_get_master(priv->minor); + if (!priv->minor->master) { + ret = -ENOMEM; + goto out_free; + } + priv->is_master = 1; + priv->master = priv->minor->master; + + priv->authenticated = 1; + mutex_unlock(&dev->struct_mutex); + if (dev->driver->master_create) { + ret = dev->driver->master_create(dev, priv->master); + if (ret) { + drm_put_master(priv->minor->master); + priv->minor->master = priv->master = NULL; + mutex_unlock(&dev->struct_mutex); + goto out_free; + } + } + } else { + priv->master = priv->minor->master; + mutex_unlock(&dev->struct_mutex); + } + + mutex_lock(&dev->struct_mutex); list_add(&priv->lhead, &dev->filelist); mutex_unlock(&dev->struct_mutex); @@ -392,59 +406,63 @@ int drm_release(struct inode *inode, struct file *filp) current->pid, (long)old_encode_dev(file_priv->minor->device), dev->open_count); - if (dev->driver->reclaim_buffers_locked && dev->lock.hw_lock) { - if (drm_i_have_hw_lock(dev, file_priv)) { - dev->driver->reclaim_buffers_locked(dev, file_priv); - } else { - unsigned long _end=jiffies + 3*DRM_HZ; - int locked = 0; - - drm_idlelock_take(&dev->lock); - - /* - * Wait for a while. - */ - - do{ - spin_lock_bh(&dev->lock.spinlock); - locked = dev->lock.idle_has_lock; - spin_unlock_bh(&dev->lock.spinlock); - if (locked) - break; - schedule(); - } while (!time_after_eq(jiffies, _end)); - - if (!locked) { - DRM_ERROR("reclaim_buffers_locked() deadlock. Please rework this\n" - "\tdriver to use reclaim_buffers_idlelocked() instead.\n" - "\tI will go on reclaiming the buffers anyway.\n"); + /* if the master has gone away we can't do anything with the lock */ + if (file_priv->minor->master) { + if (dev->driver->reclaim_buffers_locked && file_priv->master->lock.hw_lock) { + if (drm_i_have_hw_lock(dev, file_priv)) { + dev->driver->reclaim_buffers_locked(dev, file_priv); + } else { + unsigned long _end=jiffies + 3*DRM_HZ; + int locked = 0; + + drm_idlelock_take(&file_priv->master->lock); + + /* + * Wait for a while. + */ + + do{ + spin_lock_bh(&file_priv->master->lock.spinlock); + locked = file_priv->master->lock.idle_has_lock; + spin_unlock_bh(&file_priv->master->lock.spinlock); + if (locked) + break; + schedule(); + } while (!time_after_eq(jiffies, _end)); + + if (!locked) { + DRM_ERROR("reclaim_buffers_locked() deadlock. Please rework this\n" + "\tdriver to use reclaim_buffers_idlelocked() instead.\n" + "\tI will go on reclaiming the buffers anyway.\n"); + } + + dev->driver->reclaim_buffers_locked(dev, file_priv); + drm_idlelock_release(&file_priv->master->lock); } - - dev->driver->reclaim_buffers_locked(dev, file_priv); - drm_idlelock_release(&dev->lock); } - } - - if (dev->driver->reclaim_buffers_idlelocked && dev->lock.hw_lock) { - - drm_idlelock_take(&dev->lock); - dev->driver->reclaim_buffers_idlelocked(dev, file_priv); - drm_idlelock_release(&dev->lock); - } + if (dev->driver->reclaim_buffers_idlelocked && file_priv->master->lock.hw_lock) { + + drm_idlelock_take(&file_priv->master->lock); + dev->driver->reclaim_buffers_idlelocked(dev, file_priv); + drm_idlelock_release(&file_priv->master->lock); + + } - if (drm_i_have_hw_lock(dev, file_priv)) { - DRM_DEBUG("File %p released, freeing lock for context %d\n", - filp, _DRM_LOCKING_CONTEXT(dev->lock.hw_lock->lock)); - - drm_lock_free(&dev->lock, - _DRM_LOCKING_CONTEXT(dev->lock.hw_lock->lock)); - } + if (drm_i_have_hw_lock(dev, file_priv)) { + DRM_DEBUG("File %p released, freeing lock for context %d\n", + filp, _DRM_LOCKING_CONTEXT(file_priv->master->lock.hw_lock->lock)); + + drm_lock_free(&file_priv->master->lock, + _DRM_LOCKING_CONTEXT(file_priv->master->lock.hw_lock->lock)); + } + - if (drm_core_check_feature(dev, DRIVER_HAVE_DMA) && - !dev->driver->reclaim_buffers_locked) { - dev->driver->reclaim_buffers(dev, file_priv); + if (drm_core_check_feature(dev, DRIVER_HAVE_DMA) && + !dev->driver->reclaim_buffers_locked) { + dev->driver->reclaim_buffers(dev, file_priv); + } } if (dev->driver->driver_features & DRIVER_GEM) @@ -474,15 +492,30 @@ int drm_release(struct inode *inode, struct file *filp) } mutex_unlock(&dev->ctxlist_mutex); - mutex_lock(&dev->struct_mutex); - drm_object_release(filp); - if (file_priv->remove_auth_on_close == 1) { + if (drm_core_check_feature(dev, DRIVER_MODESET)) + drm_fb_release(filp); + + if (file_priv->is_master) { struct drm_file *temp; + list_for_each_entry(temp, &dev->filelist, lhead) { + if ((temp->master == file_priv->master) && + (temp != file_priv)) + temp->authenticated = 0; + } - list_for_each_entry(temp, &dev->filelist, lhead) - temp->authenticated = 0; + if (file_priv->minor->master == file_priv->master) + file_priv->minor->master = NULL; + drm_put_master(file_priv->master); } + + file_priv->master = NULL; + file_priv->is_master = 0; + + mutex_lock(&dev->struct_mutex); + drm_object_release(filp); + list_del(&file_priv->lhead); + mutex_unlock(&dev->struct_mutex); if (dev->driver->postclose) @@ -496,9 +529,9 @@ int drm_release(struct inode *inode, struct file *filp) atomic_inc(&dev->counts[_DRM_STAT_CLOSES]); spin_lock(&dev->count_lock); if (!--dev->open_count) { - if (atomic_read(&dev->ioctl_count) || dev->blocked) { - DRM_ERROR("Device busy: %d %d\n", - atomic_read(&dev->ioctl_count), dev->blocked); + if (atomic_read(&dev->ioctl_count)) { + DRM_ERROR("Device busy: %d\n", + atomic_read(&dev->ioctl_count)); spin_unlock(&dev->count_lock); unlock_kernel(); return -EBUSY; diff --git a/linux-core/drm_ioctl.c b/linux-core/drm_ioctl.c index 3df163db..e35126a3 100644 --- a/linux-core/drm_ioctl.c +++ b/linux-core/drm_ioctl.c @@ -53,12 +53,13 @@ int drm_getunique(struct drm_device *dev, void *data, struct drm_file *file_priv) { struct drm_unique *u = data; + struct drm_master *master = file_priv->master; - if (u->unique_len >= dev->unique_len) { - if (copy_to_user(u->unique, dev->unique, dev->unique_len)) + if (u->unique_len >= master->unique_len) { + if (copy_to_user(u->unique, master->unique, master->unique_len)) return -EFAULT; } - u->unique_len = dev->unique_len; + u->unique_len = master->unique_len; return 0; } @@ -81,36 +82,37 @@ int drm_setunique(struct drm_device *dev, void *data, struct drm_file *file_priv) { struct drm_unique *u = data; + struct drm_master *master = file_priv->master; int domain, bus, slot, func, ret; - if (dev->unique_len || dev->unique) + if (master->unique_len || master->unique) return -EBUSY; if (!u->unique_len || u->unique_len > 1024) return -EINVAL; - dev->unique_len = u->unique_len; - dev->unique = drm_alloc(u->unique_len + 1, DRM_MEM_DRIVER); - if (!dev->unique) + master->unique_len = u->unique_len; + master->unique = drm_alloc(u->unique_len + 1, DRM_MEM_DRIVER); + if (!master->unique) return -ENOMEM; - if (copy_from_user(dev->unique, u->unique, dev->unique_len)) + if (copy_from_user(master->unique, u->unique, master->unique_len)) return -EFAULT; - dev->unique[dev->unique_len] = '\0'; + master->unique[master->unique_len] = '\0'; dev->devname = drm_alloc(strlen(dev->driver->pci_driver.name) + - strlen(dev->unique) + 2, DRM_MEM_DRIVER); + strlen(master->unique) + 2, DRM_MEM_DRIVER); if (!dev->devname) return -ENOMEM; sprintf(dev->devname, "%s@%s", dev->driver->pci_driver.name, - dev->unique); + master->unique); /* Return error if the busid submitted doesn't match the device's actual * busid. */ - ret = sscanf(dev->unique, "PCI:%d:%d:%d", &bus, &slot, &func); + ret = sscanf(master->unique, "PCI:%d:%d:%d", &bus, &slot, &func); if (ret != 3) return -EINVAL; domain = bus >> 8; @@ -125,33 +127,35 @@ int drm_setunique(struct drm_device *dev, void *data, return 0; } -static int drm_set_busid(struct drm_device * dev) +static int drm_set_busid(struct drm_device *dev, struct drm_file *file_priv) { + struct drm_master *master = file_priv->master; int len; - if (dev->unique != NULL) + + if (master->unique != NULL) return -EBUSY; - dev->unique_len = 40; - dev->unique = drm_alloc(dev->unique_len + 1, DRM_MEM_DRIVER); - if (dev->unique == NULL) + master->unique_len = 40; + master->unique = drm_alloc(master->unique_len + 1, DRM_MEM_DRIVER); + if (master->unique == NULL) return -ENOMEM; - len = snprintf(dev->unique, dev->unique_len, "pci:%04x:%02x:%02x.%d", + len = snprintf(master->unique, master->unique_len, "pci:%04x:%02x:%02x.%d", drm_get_pci_domain(dev), dev->pdev->bus->number, PCI_SLOT(dev->pdev->devfn), PCI_FUNC(dev->pdev->devfn)); - if (len > dev->unique_len) + if (len > master->unique_len) DRM_ERROR("buffer overflow"); dev->devname = - drm_alloc(strlen(dev->driver->pci_driver.name) + dev->unique_len + + drm_alloc(strlen(dev->driver->pci_driver.name) + master->unique_len + 2, DRM_MEM_DRIVER); if (dev->devname == NULL) return -ENOMEM; sprintf(dev->devname, "%s@%s", dev->driver->pci_driver.name, - dev->unique); + master->unique); return 0; } @@ -275,7 +279,7 @@ int drm_getstats(struct drm_device *dev, void *data, for (i = 0; i < dev->counters; i++) { if (dev->types[i] == _DRM_STAT_LOCK) stats->data[i].value = - (dev->lock.hw_lock ? dev->lock.hw_lock->lock : 0); + (file_priv->master->lock.hw_lock ? file_priv->master->lock.hw_lock->lock : 0); else stats->data[i].value = atomic_read(&dev->counts[i]); stats->data[i].type = dev->types[i]; @@ -317,7 +321,7 @@ int drm_setversion(struct drm_device *dev, void *data, struct drm_file *file_pri /* * Version 1.1 includes tying of DRM to specific device */ - drm_set_busid(dev); + drm_set_busid(dev, file_priv); } } diff --git a/linux-core/drm_irq.c b/linux-core/drm_irq.c index 318d9d7a..c6024d95 100644 --- a/linux-core/drm_irq.c +++ b/linux-core/drm_irq.c @@ -90,32 +90,41 @@ static void vblank_disable_fn(unsigned long arg) static void drm_vblank_cleanup(struct drm_device *dev) { - /* Bail if the driver didn't call drm_vblank_init() */ - if (dev->num_crtcs == 0) - return; - del_timer(&dev->vblank_disable_timer); vblank_disable_fn((unsigned long)dev); - drm_free(dev->vbl_queue, sizeof(*dev->vbl_queue) * dev->num_crtcs, + if (dev->vbl_queue) + drm_free(dev->vbl_queue, sizeof(*dev->vbl_queue) * dev->num_crtcs, DRM_MEM_DRIVER); - drm_free(dev->vbl_sigs, sizeof(*dev->vbl_sigs) * dev->num_crtcs, + + if (dev->vbl_sigs) + drm_free(dev->vbl_sigs, sizeof(*dev->vbl_sigs) * dev->num_crtcs, DRM_MEM_DRIVER); - drm_free(dev->_vblank_count, sizeof(*dev->_vblank_count) * + + if (dev->_vblank_count) + drm_free(dev->_vblank_count, sizeof(*dev->_vblank_count) * dev->num_crtcs, DRM_MEM_DRIVER); - drm_free(dev->vblank_refcount, sizeof(*dev->vblank_refcount) * + + if (dev->vblank_refcount) + drm_free(dev->vblank_refcount, sizeof(*dev->vblank_refcount) * dev->num_crtcs, DRM_MEM_DRIVER); - drm_free(dev->vblank_enabled, sizeof(*dev->vblank_enabled) * + + if (dev->vblank_enabled) + drm_free(dev->vblank_enabled, sizeof(*dev->vblank_enabled) * dev->num_crtcs, DRM_MEM_DRIVER); - drm_free(dev->last_vblank, sizeof(*dev->last_vblank) * dev->num_crtcs, + + if (dev->last_vblank) + drm_free(dev->last_vblank, sizeof(*dev->last_vblank) * dev->num_crtcs, DRM_MEM_DRIVER); - drm_free(dev->vblank_premodeset, sizeof(*dev->vblank_premodeset) * + + if (dev->vblank_premodeset) + drm_free(dev->vblank_premodeset, sizeof(*dev->vblank_premodeset) * dev->num_crtcs, DRM_MEM_DRIVER); - drm_free(dev->vblank_offset, sizeof(*dev->vblank_offset) * dev->num_crtcs, - DRM_MEM_DRIVER); - dev->num_crtcs = 0; + if (dev->vblank_offset) + drm_free(dev->vblank_offset, sizeof(*dev->vblank_offset) * dev->num_crtcs, + DRM_MEM_DRIVER); } int drm_vblank_init(struct drm_device *dev, int num_crtcs) @@ -183,6 +192,82 @@ err: } EXPORT_SYMBOL(drm_vblank_init); +int drm_wait_hotplug(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + union drm_wait_hotplug *hotplugwait = data; + struct timeval now; + int ret = 0; + unsigned int flags; + + if ((!dev->irq) || (!dev->irq_enabled)) + return -EINVAL; + + flags = hotplugwait->request.type; + + if (flags & _DRM_HOTPLUG_SIGNAL) { + unsigned long irqflags; + struct list_head *hotplug_sigs = dev->hotplug_sigs; + struct drm_hotplug_sig *hotplug_sig; + + hotplug_sig = drm_calloc(1, sizeof(struct drm_hotplug_sig), + DRM_MEM_DRIVER); + if (!hotplug_sig) + return -ENOMEM; + + atomic_inc(&dev->hotplug_signal_pending); + + hotplug_sig->info.si_signo = hotplugwait->request.signal; + hotplug_sig->task = current; + hotplug_sig->counter = + hotplugwait->reply.counter = + dev->mode_config.hotplug_counter; + + spin_lock_irqsave(&dev->hotplug_lock, irqflags); + + list_add_tail(&hotplug_sig->head, hotplug_sigs); + + spin_unlock_irqrestore(&dev->hotplug_lock, irqflags); + } else { + int cur_hotplug = dev->mode_config.hotplug_counter; + + DRM_WAIT_ON(ret, dev->hotplug_queue, 3 * DRM_HZ, + dev->mode_config.hotplug_counter > cur_hotplug); + + do_gettimeofday(&now); + + hotplugwait->reply.tval_sec = now.tv_sec; + hotplugwait->reply.tval_usec = now.tv_usec; + hotplugwait->reply.counter = dev->mode_config.hotplug_counter; + } + + return ret; +} + +static void drm_hotplug_cleanup(struct drm_device *dev) +{ + if (dev->hotplug_sigs) + drm_free(dev->hotplug_sigs, sizeof(*dev->hotplug_sigs), + DRM_MEM_DRIVER); +} +EXPORT_SYMBOL(drm_hotplug_cleanup); + +int drm_hotplug_init(struct drm_device *dev) +{ + spin_lock_init(&dev->hotplug_lock); + atomic_set(&dev->hotplug_signal_pending, 0); + + dev->hotplug_sigs = drm_alloc(sizeof(struct list_head), DRM_MEM_DRIVER); + if (!dev->hotplug_sigs) + return -ENOMEM; + + INIT_LIST_HEAD(dev->hotplug_sigs); + init_waitqueue_head(&dev->hotplug_queue); + + return 0; +} +EXPORT_SYMBOL(drm_hotplug_init); + /** * Install IRQ handler. * @@ -213,7 +298,7 @@ int drm_irq_install(struct drm_device * dev) if (dev->irq_enabled) { mutex_unlock(&dev->struct_mutex); - return -EBUSY; + return 0; } dev->irq_enabled = 1; mutex_unlock(&dev->struct_mutex); @@ -278,6 +363,8 @@ int drm_irq_uninstall(struct drm_device * dev) drm_vblank_cleanup(dev); + drm_hotplug_cleanup(dev); + dev->locked_tasklet_func = NULL; return 0; @@ -307,6 +394,8 @@ int drm_control(struct drm_device *dev, void *data, case DRM_INST_HANDLER: if (!drm_core_check_feature(dev, DRIVER_HAVE_IRQ)) return 0; + if (drm_core_check_feature(dev, DRIVER_MODESET)) + return 0; if (dev->if_version < DRM_IF_VERSION(1, 2) && ctl->irq != dev->irq) return -EINVAL; @@ -314,6 +403,8 @@ int drm_control(struct drm_device *dev, void *data, case DRM_UNINST_HANDLER: if (!drm_core_check_feature(dev, DRIVER_HAVE_IRQ)) return 0; + if (drm_core_check_feature(dev, DRIVER_MODESET)) + return 0; return drm_irq_uninstall(dev); default: return -EINVAL; @@ -527,7 +618,7 @@ int drm_wait_vblank(struct drm_device *dev, void *data, if (flags & _DRM_VBLANK_SIGNAL) { unsigned long irqflags; struct list_head *vbl_sigs = &dev->vbl_sigs[crtc]; - struct drm_vbl_sig *vbl_sig; + struct drm_vbl_sig *vbl_sig, *tmp; spin_lock_irqsave(&dev->vbl_lock, irqflags); @@ -535,7 +626,7 @@ int drm_wait_vblank(struct drm_device *dev, void *data, * for the same vblank sequence number; nothing to be done in * that case */ - list_for_each_entry(vbl_sig, vbl_sigs, head) { + list_for_each_entry_safe(vbl_sig, tmp, vbl_sigs, head) { if (vbl_sig->sequence == vblwait->request.sequence && vbl_sig->info.si_signo == vblwait->request.signal @@ -657,6 +748,53 @@ void drm_handle_vblank(struct drm_device *dev, int crtc) EXPORT_SYMBOL(drm_handle_vblank); /** + * Send the HOTPLUG signals. + * + * \param dev DRM device. + * + * Sends a signal for each task in drm_device::hotplug_sigs and empties the list. + */ +static void drm_hotplug_send_signals(struct drm_device * dev) +{ + struct drm_hotplug_sig *hotplug_sig, *tmp; + struct list_head *hotplug_sigs; + unsigned long flags; + + spin_lock_irqsave(&dev->hotplug_lock, flags); + + hotplug_sigs = dev->hotplug_sigs; + + list_for_each_entry_safe(hotplug_sig, tmp, hotplug_sigs, head) { + hotplug_sig->info.si_code = hotplug_sig->counter; + + send_sig_info(hotplug_sig->info.si_signo, + &hotplug_sig->info, hotplug_sig->task); + + list_del(&hotplug_sig->head); + + drm_free(hotplug_sig, sizeof(*hotplug_sig), + DRM_MEM_DRIVER); + atomic_dec(&dev->hotplug_signal_pending); + } + + spin_unlock_irqrestore(&dev->hotplug_lock, flags); +} + +/** + * drm_handle_hotplug - handle a hotplug event + * @dev: DRM device + * @crtc: where this event occurred + * + * Drivers should call this routine in their hotplug interrupt handlers. + */ +void drm_handle_hotplug(struct drm_device *dev) +{ + DRM_WAKEUP(&dev->hotplug_queue); + drm_hotplug_send_signals(dev); +} +EXPORT_SYMBOL(drm_handle_hotplug); + +/** * Tasklet wrapper function. * * \param data DRM device in disguise. @@ -673,18 +811,18 @@ static void drm_locked_tasklet_func(unsigned long data) spin_lock_irqsave(&dev->tasklet_lock, irqflags); if (!dev->locked_tasklet_func || - !drm_lock_take(&dev->lock, + !drm_lock_take(&dev->primary->master->lock, DRM_KERNEL_CONTEXT)) { spin_unlock_irqrestore(&dev->tasklet_lock, irqflags); return; } - dev->lock.lock_time = jiffies; + dev->primary->master->lock.lock_time = jiffies; atomic_inc(&dev->counts[_DRM_STAT_LOCKS]); dev->locked_tasklet_func(dev); - drm_lock_free(&dev->lock, + drm_lock_free(&dev->primary->master->lock, DRM_KERNEL_CONTEXT); dev->locked_tasklet_func = NULL; diff --git a/linux-core/drm_lock.c b/linux-core/drm_lock.c index e6eae42b..d2fb1feb 100644 --- a/linux-core/drm_lock.c +++ b/linux-core/drm_lock.c @@ -52,6 +52,7 @@ int drm_lock(struct drm_device *dev, void *data, struct drm_file *file_priv) { DECLARE_WAITQUEUE(entry, current); struct drm_lock *lock = data; + struct drm_master *master = file_priv->master; int ret = 0; ++file_priv->lock_count; @@ -64,26 +65,27 @@ int drm_lock(struct drm_device *dev, void *data, struct drm_file *file_priv) DRM_DEBUG("%d (pid %d) requests lock (0x%08x), flags = 0x%08x\n", lock->context, current->pid, - dev->lock.hw_lock->lock, lock->flags); + master->lock.hw_lock->lock, lock->flags); if (drm_core_check_feature(dev, DRIVER_DMA_QUEUE)) if (lock->context < 0) return -EINVAL; - add_wait_queue(&dev->lock.lock_queue, &entry); - spin_lock_bh(&dev->lock.spinlock); - dev->lock.user_waiters++; - spin_unlock_bh(&dev->lock.spinlock); + add_wait_queue(&master->lock.lock_queue, &entry); + spin_lock_bh(&master->lock.spinlock); + master->lock.user_waiters++; + spin_unlock_bh(&master->lock.spinlock); + for (;;) { __set_current_state(TASK_INTERRUPTIBLE); - if (!dev->lock.hw_lock) { + if (!master->lock.hw_lock) { /* Device has been unregistered */ ret = -EINTR; break; } - if (drm_lock_take(&dev->lock, lock->context)) { - dev->lock.file_priv = file_priv; - dev->lock.lock_time = jiffies; + if (drm_lock_take(&master->lock, lock->context)) { + master->lock.file_priv = file_priv; + master->lock.lock_time = jiffies; atomic_inc(&dev->counts[_DRM_STAT_LOCKS]); break; /* Got lock */ } @@ -95,11 +97,11 @@ int drm_lock(struct drm_device *dev, void *data, struct drm_file *file_priv) break; } } - spin_lock_bh(&dev->lock.spinlock); - dev->lock.user_waiters--; - spin_unlock_bh(&dev->lock.spinlock); + spin_lock_bh(&master->lock.spinlock); + master->lock.user_waiters--; + spin_unlock_bh(&master->lock.spinlock); __set_current_state(TASK_RUNNING); - remove_wait_queue(&dev->lock.lock_queue, &entry); + remove_wait_queue(&master->lock.lock_queue, &entry); DRM_DEBUG("%d %s\n", lock->context, ret ? "interrupted" : "has lock"); @@ -111,7 +113,7 @@ int drm_lock(struct drm_device *dev, void *data, struct drm_file *file_priv) sigaddset(&dev->sigmask, SIGTTIN); sigaddset(&dev->sigmask, SIGTTOU); dev->sigdata.context = lock->context; - dev->sigdata.lock = dev->lock.hw_lock; + dev->sigdata.lock = master->lock.hw_lock; block_all_signals(drm_notifier, &dev->sigdata, &dev->sigmask); if (dev->driver->dma_ready && (lock->flags & _DRM_LOCK_READY)) @@ -149,6 +151,7 @@ int drm_lock(struct drm_device *dev, void *data, struct drm_file *file_priv) int drm_unlock(struct drm_device *dev, void *data, struct drm_file *file_priv) { struct drm_lock *lock = data; + struct drm_master *master = file_priv->master; unsigned long irqflags; if (lock->context == DRM_KERNEL_CONTEXT) { @@ -175,7 +178,7 @@ int drm_unlock(struct drm_device *dev, void *data, struct drm_file *file_priv) if (dev->driver->kernel_context_switch_unlock) dev->driver->kernel_context_switch_unlock(dev); else { - if (drm_lock_free(&dev->lock,lock->context)) { + if (drm_lock_free(&master->lock,lock->context)) { /* FIXME: Should really bail out here. */ } } @@ -213,16 +216,22 @@ int drm_lock_take(struct drm_lock_data *lock_data, } while (prev != old); spin_unlock_bh(&lock_data->spinlock); - /* Warn on recursive locking of user contexts. */ - if (_DRM_LOCKING_CONTEXT(old) == context && _DRM_LOCK_IS_HELD(old)) { - if (context != DRM_KERNEL_CONTEXT) { - DRM_ERROR("%d holds heavyweight lock\n", - context); + if (_DRM_LOCKING_CONTEXT(old) == context) { + if (old & _DRM_LOCK_HELD) { + if (context != DRM_KERNEL_CONTEXT) { + DRM_ERROR("%d holds heavyweight lock\n", + context); + } + return 0; } - return 0; } - return !_DRM_LOCK_IS_HELD(old); + if ((_DRM_LOCKING_CONTEXT(new)) == context && (new & _DRM_LOCK_HELD)) { + /* Have lock */ + + return 1; + } + return 0; } /** @@ -379,13 +388,15 @@ EXPORT_SYMBOL(drm_idlelock_release); * Takes the lock on behalf of the client if needed, using the kernel context. * * This allows us to hide the hardware lock when it's required for protection - * of data structures (such as command ringbuffer) shared with the X Server, and + * of data structures (such as command ringbuffer) shared with the X Server, an + * a way for us to transition to lockless for those requests when the X Server * stops accessing the ringbuffer directly, without having to update the * other userland clients. */ int drm_client_lock_take(struct drm_device *dev, struct drm_file *file_priv) { + struct drm_master *master = file_priv->master; int ret; unsigned long irqflags; @@ -398,45 +409,46 @@ int drm_client_lock_take(struct drm_device *dev, struct drm_file *file_priv) * context on behalf of the client, and return whether we were * successful. */ - spin_lock_irqsave(&dev->lock.spinlock, irqflags); - dev->lock.user_waiters++; - spin_unlock_irqrestore(&dev->lock.spinlock, irqflags); - ret = wait_event_interruptible(dev->lock.lock_queue, - drm_lock_take(&dev->lock, + spin_lock_irqsave(&master->lock.spinlock, irqflags); + master->lock.user_waiters++; + spin_unlock_irqrestore(&master->lock.spinlock, irqflags); + ret = wait_event_interruptible(master->lock.lock_queue, + drm_lock_take(&master->lock, DRM_KERNEL_CONTEXT)); - spin_lock_irqsave(&dev->lock.spinlock, irqflags); - dev->lock.user_waiters--; + spin_lock_irqsave(&master->lock.spinlock, irqflags); + master->lock.user_waiters--; if (ret != 0) { - spin_unlock_irqrestore(&dev->lock.spinlock, irqflags); + spin_unlock_irqrestore(&master->lock.spinlock, irqflags); } else { - dev->lock.file_priv = file_priv; - dev->lock.lock_time = jiffies; - dev->lock.kernel_held = 1; + master->lock.file_priv = file_priv; + master->lock.lock_time = jiffies; + master->lock.kernel_held = 1; file_priv->lock_count++; - spin_unlock_irqrestore(&dev->lock.spinlock, irqflags); + spin_unlock_irqrestore(&master->lock.spinlock, irqflags); } mutex_lock (&dev->struct_mutex); return ret; } EXPORT_SYMBOL(drm_client_lock_take); -void drm_client_lock_release(struct drm_device *dev) +void drm_client_lock_release(struct drm_device *dev, struct drm_file *file_priv) { - if (dev->lock.kernel_held) { - dev->lock.kernel_held = 0; - dev->lock.file_priv = NULL; - drm_lock_free(&dev->lock, DRM_KERNEL_CONTEXT); + struct drm_master *master = file_priv->master; + + if (master->lock.kernel_held) { + master->lock.kernel_held = 0; + master->lock.file_priv = NULL; + drm_lock_free(&master->lock, DRM_KERNEL_CONTEXT); } } EXPORT_SYMBOL(drm_client_lock_release); - int drm_i_have_hw_lock(struct drm_device *dev, struct drm_file *file_priv) { - - return (file_priv->lock_count && dev->lock.hw_lock && - _DRM_LOCK_IS_HELD(dev->lock.hw_lock->lock) && - dev->lock.file_priv == file_priv); + struct drm_master *master = file_priv->master; + return (file_priv->lock_count && master->lock.hw_lock && + _DRM_LOCK_IS_HELD(master->lock.hw_lock->lock) && + master->lock.file_priv == file_priv); } EXPORT_SYMBOL(drm_i_have_hw_lock); diff --git a/linux-core/drm_memrange.c b/linux-core/drm_memrange.c index 7014c4e2..5921eff8 100644 --- a/linux-core/drm_memrange.c +++ b/linux-core/drm_memrange.c @@ -294,5 +294,4 @@ void drm_memrange_takedown(struct drm_memrange * mm) list_del(&entry->ml_entry); drm_ctl_free(entry, sizeof(*entry), DRM_MEM_MM); } - EXPORT_SYMBOL(drm_memrange_takedown); diff --git a/linux-core/drm_modes.c b/linux-core/drm_modes.c new file mode 100644 index 00000000..3ed427fb --- /dev/null +++ b/linux-core/drm_modes.c @@ -0,0 +1,566 @@ +/* + * Copyright © 1997-2003 by The XFree86 Project, Inc. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * Except as contained in this notice, the name of the copyright holder(s) + * and author(s) shall not be used in advertising or otherwise to promote + * the sale, use or other dealings in this Software without prior written + * authorization from the copyright holder(s) and author(s). + */ +/* + * Copyright © 2007 Dave Airlie + */ + +#include <linux/list.h> +#include "drmP.h" +#include "drm.h" +#include "drm_crtc.h" + +/** + * drm_mode_debug_printmodeline - debug print a mode + * @dev: DRM device + * @mode: mode to print + * + * LOCKING: + * None. + * + * Describe @mode using DRM_DEBUG. + */ +void drm_mode_debug_printmodeline(struct drm_display_mode *mode) +{ + DRM_DEBUG("Modeline %d:\"%s\" %d %d %d %d %d %d %d %d %d %d 0x%x 0x%x\n", + mode->base.id, mode->name, mode->vrefresh, mode->clock, + mode->hdisplay, mode->hsync_start, + mode->hsync_end, mode->htotal, + mode->vdisplay, mode->vsync_start, + mode->vsync_end, mode->vtotal, mode->type, mode->flags); +} +EXPORT_SYMBOL(drm_mode_debug_printmodeline); + +/** + * drm_mode_set_name - set the name on a mode + * @mode: name will be set in this mode + * + * LOCKING: + * None. + * + * Set the name of @mode to a standard format. + */ +void drm_mode_set_name(struct drm_display_mode *mode) +{ + snprintf(mode->name, DRM_DISPLAY_MODE_LEN, "%dx%d", mode->hdisplay, + mode->vdisplay); +} +EXPORT_SYMBOL(drm_mode_set_name); + +/** + * drm_mode_list_concat - move modes from one list to another + * @head: source list + * @new: dst list + * + * LOCKING: + * Caller must ensure both lists are locked. + * + * Move all the modes from @head to @new. + */ +void drm_mode_list_concat(struct list_head *head, struct list_head *new) +{ + + struct list_head *entry, *tmp; + + list_for_each_safe(entry, tmp, head) { + list_move_tail(entry, new); + } +} + +/** + * drm_mode_width - get the width of a mode + * @mode: mode + * + * LOCKING: + * None. + * + * Return @mode's width (hdisplay) value. + * + * FIXME: is this needed? + * + * RETURNS: + * @mode->hdisplay + */ +int drm_mode_width(struct drm_display_mode *mode) +{ + return mode->hdisplay; + +} +EXPORT_SYMBOL(drm_mode_width); + +/** + * drm_mode_height - get the height of a mode + * @mode: mode + * + * LOCKING: + * None. + * + * Return @mode's height (vdisplay) value. + * + * FIXME: is this needed? + * + * RETURNS: + * @mode->vdisplay + */ +int drm_mode_height(struct drm_display_mode *mode) +{ + return mode->vdisplay; +} +EXPORT_SYMBOL(drm_mode_height); + +/** + * drm_mode_vrefresh - get the vrefresh of a mode + * @mode: mode + * + * LOCKING: + * None. + * + * Return @mode's vrefresh rate or calculate it if necessary. + * + * FIXME: why is this needed? shouldn't vrefresh be set already? + * + * RETURNS: + * Vertical refresh rate of @mode x 1000. For precision reasons. + */ +int drm_mode_vrefresh(struct drm_display_mode *mode) +{ + int refresh = 0; + unsigned int calc_val; + + if (mode->vrefresh > 0) + refresh = mode->vrefresh; + else if (mode->htotal > 0 && mode->vtotal > 0) { + /* work out vrefresh the value will be x1000 */ + calc_val = (mode->clock * 1000); + + calc_val /= mode->htotal; + calc_val *= 1000; + calc_val /= mode->vtotal; + + refresh = calc_val; + if (mode->flags & V_INTERLACE) + refresh *= 2; + if (mode->flags & V_DBLSCAN) + refresh /= 2; + if (mode->vscan > 1) + refresh /= mode->vscan; + } + return refresh; +} +EXPORT_SYMBOL(drm_mode_vrefresh); + +/** + * drm_mode_set_crtcinfo - set CRTC modesetting parameters + * @p: mode + * @adjust_flags: unused? (FIXME) + * + * LOCKING: + * None. + * + * Setup the CRTC modesetting parameters for @p, adjusting if necessary. + */ +void drm_mode_set_crtcinfo(struct drm_display_mode *p, int adjust_flags) +{ + if ((p == NULL) || ((p->type & DRM_MODE_TYPE_CRTC_C) == DRM_MODE_TYPE_BUILTIN)) + return; + + p->crtc_hdisplay = p->hdisplay; + p->crtc_hsync_start = p->hsync_start; + p->crtc_hsync_end = p->hsync_end; + p->crtc_htotal = p->htotal; + p->crtc_hskew = p->hskew; + p->crtc_vdisplay = p->vdisplay; + p->crtc_vsync_start = p->vsync_start; + p->crtc_vsync_end = p->vsync_end; + p->crtc_vtotal = p->vtotal; + + if (p->flags & V_INTERLACE) { + if (adjust_flags & CRTC_INTERLACE_HALVE_V) { + p->crtc_vdisplay /= 2; + p->crtc_vsync_start /= 2; + p->crtc_vsync_end /= 2; + p->crtc_vtotal /= 2; + } + + p->crtc_vtotal |= 1; + } + + if (p->flags & V_DBLSCAN) { + p->crtc_vdisplay *= 2; + p->crtc_vsync_start *= 2; + p->crtc_vsync_end *= 2; + p->crtc_vtotal *= 2; + } + + if (p->vscan > 1) { + p->crtc_vdisplay *= p->vscan; + p->crtc_vsync_start *= p->vscan; + p->crtc_vsync_end *= p->vscan; + p->crtc_vtotal *= p->vscan; + } + + p->crtc_vblank_start = min(p->crtc_vsync_start, p->crtc_vdisplay); + p->crtc_vblank_end = max(p->crtc_vsync_end, p->crtc_vtotal); + p->crtc_hblank_start = min(p->crtc_hsync_start, p->crtc_hdisplay); + p->crtc_hblank_end = max(p->crtc_hsync_end, p->crtc_htotal); + + p->crtc_hadjusted = false; + p->crtc_vadjusted = false; +} +EXPORT_SYMBOL(drm_mode_set_crtcinfo); + + +/** + * drm_mode_duplicate - allocate and duplicate an existing mode + * @m: mode to duplicate + * + * LOCKING: + * None. + * + * Just allocate a new mode, copy the existing mode into it, and return + * a pointer to it. Used to create new instances of established modes. + */ +struct drm_display_mode *drm_mode_duplicate(struct drm_device *dev, + struct drm_display_mode *mode) +{ + struct drm_display_mode *nmode; + int new_id; + + nmode = drm_mode_create(dev); + if (!nmode) + return NULL; + + new_id = nmode->base.id; + *nmode = *mode; + nmode->base.id = new_id; + INIT_LIST_HEAD(&nmode->head); + return nmode; +} +EXPORT_SYMBOL(drm_mode_duplicate); + +/** + * drm_mode_equal - test modes for equality + * @mode1: first mode + * @mode2: second mode + * + * LOCKING: + * None. + * + * Check to see if @mode1 and @mode2 are equivalent. + * + * RETURNS: + * True if the modes are equal, false otherwise. + */ +bool drm_mode_equal(struct drm_display_mode *mode1, struct drm_display_mode *mode2) +{ + /* do clock check convert to PICOS so fb modes get matched + * the same */ + if (mode1->clock && mode2->clock) { + if (KHZ2PICOS(mode1->clock) != KHZ2PICOS(mode2->clock)) + return false; + } else if (mode1->clock != mode2->clock) + return false; + + if (mode1->hdisplay == mode2->hdisplay && + mode1->hsync_start == mode2->hsync_start && + mode1->hsync_end == mode2->hsync_end && + mode1->htotal == mode2->htotal && + mode1->hskew == mode2->hskew && + mode1->vdisplay == mode2->vdisplay && + mode1->vsync_start == mode2->vsync_start && + mode1->vsync_end == mode2->vsync_end && + mode1->vtotal == mode2->vtotal && + mode1->vscan == mode2->vscan && + mode1->flags == mode2->flags) + return true; + + return false; +} +EXPORT_SYMBOL(drm_mode_equal); + +/** + * drm_mode_validate_size - make sure modes adhere to size constraints + * @dev: DRM device + * @mode_list: list of modes to check + * @maxX: maximum width + * @maxY: maximum height + * @maxPitch: max pitch + * + * LOCKING: + * Caller must hold a lock protecting @mode_list. + * + * The DRM device (@dev) has size and pitch limits. Here we validate the + * modes we probed for @dev against those limits and set their status as + * necessary. + */ +void drm_mode_validate_size(struct drm_device *dev, + struct list_head *mode_list, + int maxX, int maxY, int maxPitch) +{ + struct drm_display_mode *mode; + + list_for_each_entry(mode, mode_list, head) { + if (maxPitch > 0 && mode->hdisplay > maxPitch) + mode->status = MODE_BAD_WIDTH; + + if (maxX > 0 && mode->hdisplay > maxX) + mode->status = MODE_VIRTUAL_X; + + if (maxY > 0 && mode->vdisplay > maxY) + mode->status = MODE_VIRTUAL_Y; + } +} +EXPORT_SYMBOL(drm_mode_validate_size); + +/** + * drm_mode_validate_clocks - validate modes against clock limits + * @dev: DRM device + * @mode_list: list of modes to check + * @min: minimum clock rate array + * @max: maximum clock rate array + * @n_ranges: number of clock ranges (size of arrays) + * + * LOCKING: + * Caller must hold a lock protecting @mode_list. + * + * Some code may need to check a mode list against the clock limits of the + * device in question. This function walks the mode list, testing to make + * sure each mode falls within a given range (defined by @min and @max + * arrays) and sets @mode->status as needed. + */ +void drm_mode_validate_clocks(struct drm_device *dev, + struct list_head *mode_list, + int *min, int *max, int n_ranges) +{ + struct drm_display_mode *mode; + int i; + + list_for_each_entry(mode, mode_list, head) { + bool good = false; + for (i = 0; i < n_ranges; i++) { + if (mode->clock >= min[i] && mode->clock <= max[i]) { + good = true; + break; + } + } + if (!good) + mode->status = MODE_CLOCK_RANGE; + } +} +EXPORT_SYMBOL(drm_mode_validate_clocks); + +/** + * drm_mode_prune_invalid - remove invalid modes from mode list + * @dev: DRM device + * @mode_list: list of modes to check + * @verbose: be verbose about it + * + * LOCKING: + * Caller must hold a lock protecting @mode_list. + * + * Once mode list generation is complete, a caller can use this routine to + * remove invalid modes from a mode list. If any of the modes have a + * status other than %MODE_OK, they are removed from @mode_list and freed. + */ +void drm_mode_prune_invalid(struct drm_device *dev, + struct list_head *mode_list, bool verbose) +{ + struct drm_display_mode *mode, *t; + + list_for_each_entry_safe(mode, t, mode_list, head) { + if (mode->status != MODE_OK) { + list_del(&mode->head); + if (verbose) { + drm_mode_debug_printmodeline(mode); + DRM_DEBUG("Not using %s mode %d\n", mode->name, mode->status); + } + kfree(mode); + } + } +} + +/** + * drm_mode_compare - compare modes for favorability + * @lh_a: list_head for first mode + * @lh_b: list_head for second mode + * + * LOCKING: + * None. + * + * Compare two modes, given by @lh_a and @lh_b, returning a value indicating + * which is better. + * + * RETURNS: + * Negative if @lh_a is better than @lh_b, zero if they're equivalent, or + * positive if @lh_b is better than @lh_a. + */ +static int drm_mode_compare(struct list_head *lh_a, struct list_head *lh_b) +{ + struct drm_display_mode *a = list_entry(lh_a, struct drm_display_mode, head); + struct drm_display_mode *b = list_entry(lh_b, struct drm_display_mode, head); + int diff; + + diff = ((b->type & DRM_MODE_TYPE_PREFERRED) != 0) - + ((a->type & DRM_MODE_TYPE_PREFERRED) != 0); + if (diff) + return diff; + diff = b->hdisplay * b->vdisplay - a->hdisplay * a->vdisplay; + if (diff) + return diff; + diff = b->clock - a->clock; + return diff; +} + +/* FIXME: what we don't have a list sort function? */ +/* list sort from Mark J Roberts (mjr@znex.org) */ +void list_sort(struct list_head *head, int (*cmp)(struct list_head *a, struct list_head *b)) +{ + struct list_head *p, *q, *e, *list, *tail, *oldhead; + int insize, nmerges, psize, qsize, i; + + list = head->next; + list_del(head); + insize = 1; + for (;;) { + p = oldhead = list; + list = tail = NULL; + nmerges = 0; + + while (p) { + nmerges++; + q = p; + psize = 0; + for (i = 0; i < insize; i++) { + psize++; + q = q->next == oldhead ? NULL : q->next; + if (!q) + break; + } + + qsize = insize; + while (psize > 0 || (qsize > 0 && q)) { + if (!psize) { + e = q; + q = q->next; + qsize--; + if (q == oldhead) + q = NULL; + } else if (!qsize || !q) { + e = p; + p = p->next; + psize--; + if (p == oldhead) + p = NULL; + } else if (cmp(p, q) <= 0) { + e = p; + p = p->next; + psize--; + if (p == oldhead) + p = NULL; + } else { + e = q; + q = q->next; + qsize--; + if (q == oldhead) + q = NULL; + } + if (tail) + tail->next = e; + else + list = e; + e->prev = tail; + tail = e; + } + p = q; + } + + tail->next = list; + list->prev = tail; + + if (nmerges <= 1) + break; + + insize *= 2; + } + + head->next = list; + head->prev = list->prev; + list->prev->next = head; + list->prev = head; +} + +/** + * drm_mode_sort - sort mode list + * @mode_list: list to sort + * + * LOCKING: + * Caller must hold a lock protecting @mode_list. + * + * Sort @mode_list by favorability, putting good modes first. + */ +void drm_mode_sort(struct list_head *mode_list) +{ + list_sort(mode_list, drm_mode_compare); +} + + +/** + * drm_mode_connector_list_update - update the mode list for the connector + * @connector: the connector to update + * + * LOCKING: + * Caller must hold a lock protecting @mode_list. + * + * This moves the modes from the @connector probed_modes list + * to the actual mode list. It compares the probed mode against the current + * list and only adds different modes. All modes unverified after this point + * will be removed by the prune invalid modes. + */ +void drm_mode_connector_list_update(struct drm_connector *connector) +{ + struct drm_display_mode *mode; + struct drm_display_mode *pmode, *pt; + int found_it; + list_for_each_entry_safe(pmode, pt, &connector->probed_modes, + head) { + found_it = 0; + /* go through current modes checking for the new probed mode */ + list_for_each_entry(mode, &connector->modes, head) { + if (drm_mode_equal(pmode, mode)) { + found_it = 1; + /* if equal delete the probed mode */ + mode->status = pmode->status; + list_del(&pmode->head); + kfree(pmode); + break; + } + } + + if (!found_it) { + list_move_tail(&pmode->head, &connector->modes); + } + } +} diff --git a/linux-core/drm_objects.h b/linux-core/drm_objects.h index 6ec09ef8..d0c34ca3 100644 --- a/linux-core/drm_objects.h +++ b/linux-core/drm_objects.h @@ -156,7 +156,6 @@ struct drm_fence_object { }; #define _DRM_FENCE_CLASSES 8 -#define _DRM_FENCE_TYPE_EXE 0x00 struct drm_fence_class_manager { struct list_head ring; @@ -656,12 +655,12 @@ struct drm_bo_driver { /* * buffer objects (drm_bo.c) */ - extern int drm_bo_create_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv); extern int drm_bo_destroy_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv); extern int drm_bo_map_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv); extern int drm_bo_unmap_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv); extern int drm_bo_reference_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv); +extern int drm_bo_set_pin(struct drm_device *dev, struct drm_buffer_object *bo, int pin); extern int drm_bo_unreference_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv); extern int drm_bo_wait_idle_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv); extern int drm_bo_info_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv); @@ -805,6 +804,10 @@ extern void drm_regs_init(struct drm_reg_manager *manager, const void *), void (*reg_destroy)(struct drm_reg *)); +extern int drm_mem_reg_ioremap(struct drm_device *dev, struct drm_bo_mem_reg * mem, + void **virtual); +extern void drm_mem_reg_iounmap(struct drm_device *dev, struct drm_bo_mem_reg * mem, + void *virtual); /* * drm_bo_lock.c * Simple replacement for the hardware lock on buffer manager init and clean. diff --git a/linux-core/drm_proc.c b/linux-core/drm_proc.c index b1b976b2..690e081c 100644 --- a/linux-core/drm_proc.c +++ b/linux-core/drm_proc.c @@ -172,6 +172,7 @@ static int drm_name_info(char *buf, char **start, off_t offset, int request, int *eof, void *data) { struct drm_minor *minor = (struct drm_minor *) data; + struct drm_master *master = minor->master; struct drm_device *dev = minor->dev; int len = 0; @@ -180,13 +181,16 @@ static int drm_name_info(char *buf, char **start, off_t offset, int request, return 0; } + if (!master) + return 0; + *start = &buf[offset]; *eof = 0; - if (dev->unique) { + if (master->unique) { DRM_PROC_PRINT("%s %s %s\n", dev->driver->pci_driver.name, - pci_name(dev->pdev), dev->unique); + pci_name(dev->pdev), master->unique); } else { DRM_PROC_PRINT("%s %s\n", dev->driver->pci_driver.name, pci_name(dev->pdev)); diff --git a/linux-core/drm_stub.c b/linux-core/drm_stub.c index 55841826..dc853b23 100644 --- a/linux-core/drm_stub.c +++ b/linux-core/drm_stub.c @@ -58,6 +58,14 @@ static int drm_minor_get_id(struct drm_device *dev, int type) int ret; int base = 0, limit = 63; + if (type == DRM_MINOR_CONTROL) { + base += 64; + limit = base + 127; + } else if (type == DRM_MINOR_RENDER) { + base += 128; + limit = base + 255; + } + again: if (idr_pre_get(&drm_minors_idr, GFP_KERNEL) == 0) { DRM_ERROR("Out of memory expanding drawable idr\n"); @@ -80,21 +88,99 @@ again: return new_id; } +int drm_setmaster_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + if (file_priv->minor->master && file_priv->minor->master != file_priv->master) + return -EINVAL; + + if (!file_priv->master) + return -EINVAL; + + if (!file_priv->minor->master && file_priv->minor->master != file_priv->master) + file_priv->minor->master = file_priv->master; + return 0; +} + +int drm_dropmaster_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + if (!file_priv->master) + return -EINVAL; + file_priv->minor->master = NULL; + return 0; +} + +struct drm_master *drm_get_master(struct drm_minor *minor) +{ + struct drm_master *master; + + master = drm_calloc(1, sizeof(*master), DRM_MEM_DRIVER); + if (!master) + return NULL; + +// INIT_LIST_HEAD(&master->filelist); + spin_lock_init(&master->lock.spinlock); + init_waitqueue_head(&master->lock.lock_queue); + drm_ht_create(&master->magiclist, DRM_MAGIC_HASH_ORDER); + INIT_LIST_HEAD(&master->magicfree); + master->minor = minor; + + list_add_tail(&master->head, &minor->master_list); + + return master; +} + +void drm_put_master(struct drm_master *master) +{ + struct drm_magic_entry *pt, *next; + struct drm_device *dev = master->minor->dev; + + list_del(&master->head); + + if (dev->driver->master_destroy) + dev->driver->master_destroy(dev, master); + + if (master->unique) { + drm_free(master->unique, strlen(master->unique) + 1, DRM_MEM_DRIVER); + master->unique = NULL; + master->unique_len = 0; + } + + list_for_each_entry_safe(pt, next, &master->magicfree, head) { + list_del(&pt->head); + drm_ht_remove_item(&master->magiclist, &pt->hash_item); + drm_free(pt, sizeof(*pt), DRM_MEM_MAGIC); + } + + drm_ht_remove(&master->magiclist); + + if (master->lock.hw_lock) { + if (dev->sigdata.lock == master->lock.hw_lock) + dev->sigdata.lock = NULL; + master->lock.hw_lock = NULL; /* SHM removed */ + master->lock.file_priv = NULL; + wake_up_interruptible(&master->lock.lock_queue); + } + + drm_free(master, sizeof(*master), DRM_MEM_DRIVER); +} + static int drm_fill_in_dev(struct drm_device * dev, struct pci_dev *pdev, const struct pci_device_id *ent, struct drm_driver *driver) { int retcode; - INIT_LIST_HEAD(&dev->filelist); INIT_LIST_HEAD(&dev->ctxlist); INIT_LIST_HEAD(&dev->vmalist); INIT_LIST_HEAD(&dev->maplist); + INIT_LIST_HEAD(&dev->filelist); spin_lock_init(&dev->count_lock); spin_lock_init(&dev->drw_lock); spin_lock_init(&dev->tasklet_lock); - spin_lock_init(&dev->lock.spinlock); +// spin_lock_init(&dev->lock.spinlock); init_timer(&dev->timer); mutex_init(&dev->struct_mutex); mutex_init(&dev->ctxlist_mutex); @@ -112,9 +198,9 @@ static int drm_fill_in_dev(struct drm_device * dev, struct pci_dev *pdev, dev->irq = pdev->irq; dev->irq_enabled = 0; - if (drm_ht_create(&dev->map_hash, DRM_MAP_HASH_ORDER)) { + if (drm_ht_create(&dev->map_hash, DRM_MAP_HASH_ORDER)) return -ENOMEM; - } + if (drm_memrange_init(&dev->offset_manager, DRM_FILE_PAGE_OFFSET_START, DRM_FILE_PAGE_OFFSET_SIZE)) { drm_ht_remove(&dev->map_hash); @@ -213,6 +299,7 @@ static int drm_get_minor(struct drm_device *dev, struct drm_minor **minor, int t new_minor->device = MKDEV(DRM_MAJOR, minor_id); new_minor->dev = dev; new_minor->index = minor_id; + INIT_LIST_HEAD(&new_minor->master_list); idr_replace(&drm_minors_idr, new_minor, minor_id); @@ -289,20 +376,32 @@ int drm_get_dev(struct pci_dev *pdev, const struct pci_device_id *ent, } /* only add the control node on a modesetting platform */ + if (drm_core_check_feature(dev, DRIVER_MODESET)) + if ((ret = drm_get_minor(dev, &dev->control, DRM_MINOR_CONTROL))) + goto err_g3; + if ((ret = drm_get_minor(dev, &dev->primary, DRM_MINOR_LEGACY))) - goto err_g3; + goto err_g4; if (dev->driver->load) if ((ret = dev->driver->load(dev, ent->driver_data))) - goto err_g4; + goto err_g5; + + /* setup the grouping for the legacy output */ + if (drm_core_check_feature(dev, DRIVER_MODESET)) + if (drm_mode_group_init_legacy_group(dev, &dev->primary->mode_group)) + goto err_g5; DRM_INFO("Initialized %s %d.%d.%d %s on minor %d\n", driver->name, driver->major, driver->minor, driver->patchlevel, driver->date, dev->primary->index); return 0; -err_g4: +err_g5: drm_put_minor(&dev->primary); +err_g4: + if (drm_core_check_feature(dev, DRIVER_MODESET)) + drm_put_minor(&dev->control); err_g3: if (!drm_fb_loaded) pci_disable_device(pdev); @@ -334,11 +433,6 @@ int drm_put_dev(struct drm_device * dev) { DRM_DEBUG("release primary %s\n", dev->driver->pci_driver.name); - if (dev->unique) { - drm_free(dev->unique, strlen(dev->unique) + 1, DRM_MEM_DRIVER); - dev->unique = NULL; - dev->unique_len = 0; - } if (dev->devname) { drm_free(dev->devname, strlen(dev->devname) + 1, DRM_MEM_DRIVER); diff --git a/linux-core/drm_sysfs.c b/linux-core/drm_sysfs.c index 32759424..92371c22 100644 --- a/linux-core/drm_sysfs.c +++ b/linux-core/drm_sysfs.c @@ -36,8 +36,9 @@ static int drm_sysfs_suspend(struct device *dev, pm_message_t state) printk(KERN_ERR "%s\n", __FUNCTION__); - if (drm_dev->driver->suspend) - return drm_dev->driver->suspend(drm_dev, state); + if (drm_minor->type == DRM_MINOR_CONTROL) + if (drm_dev->driver->suspend) + return drm_dev->driver->suspend(drm_dev, state); return 0; } @@ -54,8 +55,9 @@ static int drm_sysfs_resume(struct device *dev) struct drm_minor *drm_minor = to_drm_minor(dev); struct drm_device *drm_dev = drm_minor->dev; - if (drm_dev->driver->resume) - return drm_dev->driver->resume(drm_dev); + if (drm_minor->type == DRM_MINOR_CONTROL) + if (drm_dev->driver->resume) + return drm_dev->driver->resume(drm_dev); return 0; } @@ -131,10 +133,6 @@ static ssize_t show_dri(struct device *device, struct device_attribute *attr, return snprintf(buf, PAGE_SIZE, "%s\n", drm_dev->driver->pci_driver.name); } -static struct device_attribute device_attrs[] = { - __ATTR(dri_library_name, S_IRUGO, show_dri, NULL), -}; - /** * drm_sysfs_device_release - do nothing * @dev: Linux device @@ -148,6 +146,204 @@ static void drm_sysfs_device_release(struct device *dev) return; } +/* + * Connector properties + */ +static ssize_t status_show(struct device *device, + struct device_attribute *attr, + char *buf) +{ + struct drm_connector *connector = container_of(device, struct drm_connector, kdev); + return snprintf(buf, PAGE_SIZE, "%s", + drm_get_connector_status_name(connector->funcs->detect(connector))); +} + +static ssize_t dpms_show(struct device *device, + struct device_attribute *attr, + char *buf) +{ + struct drm_connector *connector = container_of(device, struct drm_connector, kdev); + struct drm_device *dev = connector->dev; + uint64_t dpms_status; + int ret; + + ret = drm_connector_property_get_value(connector, + dev->mode_config.dpms_property, + &dpms_status); + if (ret) + return 0; + + return snprintf(buf, PAGE_SIZE, "%s", drm_get_dpms_name((int)dpms_status)); +} + +static ssize_t edid_show(struct kobject *kobj, struct bin_attribute *attr, + char *buf, loff_t off, size_t count) +{ + struct device *connector_dev = container_of(kobj, struct device, kobj); + struct drm_connector *connector = container_of(connector_dev, struct drm_connector, + kdev); + unsigned char *edid; + size_t size; + + if (!connector->edid_blob_ptr) + return 0; + + edid = connector->edid_blob_ptr->data; + size = connector->edid_blob_ptr->length; + if (!edid) + return 0; + + if (off >= size) + return 0; + + if (off + count > size) + count = size - off; + memcpy(buf, edid + off, count); + + return count; +} + +static ssize_t modes_show(struct device *device, + struct device_attribute *attr, + char *buf) +{ + struct drm_connector *connector = container_of(device, struct drm_connector, kdev); + struct drm_display_mode *mode; + int written = 0; + + list_for_each_entry(mode, &connector->modes, head) { + written += snprintf(buf + written, PAGE_SIZE - written, "%s\n", + mode->name); + } + + return written; +} + +static struct device_attribute connector_attrs[] = { + __ATTR_RO(status), + __ATTR_RO(dpms), + __ATTR_RO(modes), +}; + +static struct bin_attribute edid_attr = { + .attr.name = "edid", + .size = 128, + .read = edid_show, +}; + +/** + * drm_sysfs_connector_add - add an connector to sysfs + * @connector: connector to add + * + * Create an connector device in sysfs, along with its associated connector + * properties (so far, connection status, dpms, mode list & edid) and + * generate a hotplug event so userspace knows there's a new connector + * available. + * + * Note: + * This routine should only be called *once* for each DRM minor registered. + * A second call for an already registered device will trigger the BUG_ON + * below. + */ +int drm_sysfs_connector_add(struct drm_connector *connector) +{ + struct drm_device *dev = connector->dev; + int ret = 0, i, j; + + /* We shouldn't get called more than once for the same connector */ + BUG_ON(device_is_registered(&connector->kdev)); + + connector->kdev.parent = &dev->primary->kdev; + connector->kdev.class = drm_class; + connector->kdev.release = drm_sysfs_device_release; + + DRM_DEBUG("adding \"%s\" to sysfs\n", + drm_get_connector_name(connector)); + + snprintf(connector->kdev.bus_id, BUS_ID_SIZE, "card%d-%s", + dev->primary->index, drm_get_connector_name(connector)); + ret = device_register(&connector->kdev); + + if (ret) { + DRM_ERROR("failed to register connector device: %d\n", ret); + goto out; + } + + for (i = 0; i < ARRAY_SIZE(connector_attrs); i++) { + ret = device_create_file(&connector->kdev, &connector_attrs[i]); + if (ret) + goto err_out_files; + } + + ret = sysfs_create_bin_file(&connector->kdev.kobj, &edid_attr); + if (ret) + goto err_out_files; + + /* Let userspace know we have a new connector */ + drm_sysfs_hotplug_event(dev); + + return 0; + +err_out_files: + if (i > 0) + for (j = 0; j < i; j++) + device_remove_file(&connector->kdev, &connector_attrs[i]); + device_unregister(&connector->kdev); + +out: + return ret; +} +EXPORT_SYMBOL(drm_sysfs_connector_add); + +/** + * drm_sysfs_connector_remove - remove an connector device from sysfs + * @connector: connector to remove + * + * Remove @connector and its associated attributes from sysfs. Note that + * the device model core will take care of sending the "remove" uevent + * at this time, so we don't need to do it. + * + * Note: + * This routine should only be called if the connector was previously + * successfully registered. If @connector hasn't been registered yet, + * you'll likely see a panic somewhere deep in sysfs code when called. + */ +void drm_sysfs_connector_remove(struct drm_connector *connector) +{ + int i; + + DRM_DEBUG("removing \"%s\" from sysfs\n", + drm_get_connector_name(connector)); + + for (i = 0; i < ARRAY_SIZE(connector_attrs); i++) + device_remove_file(&connector->kdev, &connector_attrs[i]); + sysfs_remove_bin_file(&connector->kdev.kobj, &edid_attr); + device_unregister(&connector->kdev); +} +EXPORT_SYMBOL(drm_sysfs_connector_remove); + +/** + * drm_sysfs_hotplug_event - generate a DRM uevent + * @dev: DRM device + * + * Send a uevent for the DRM device specified by @dev. Currently we only + * set HOTPLUG=1 in the uevent environment, but this could be expanded to + * deal with other types of events. + */ +void drm_sysfs_hotplug_event(struct drm_device *dev) +{ + char *event_string = "HOTPLUG=1"; + char *envp[] = { event_string, NULL }; + + DRM_DEBUG("generating hotplug event\n"); + + kobject_uevent_env(&dev->primary->kdev.kobj, KOBJ_CHANGE, envp); +} + +static struct device_attribute dri_attrs[] = { + __ATTR(dri_library_name, S_IRUGO, show_dri, NULL), +}; + /** * drm_sysfs_device_add - adds a class device to sysfs for a character driver * @dev: DRM device to be added @@ -156,6 +352,11 @@ static void drm_sysfs_device_release(struct device *dev) * Add a DRM device to the DRM's device model class. We use @dev's PCI device * as the parent for the Linux device, and make sure it has a file containing * the driver we're using (for userspace compatibility). + * + * Note: + * This routine should only be called *once* for each DRM minor registered. + * A second call for an already registered device will trigger the BUG_ON + * below. */ int drm_sysfs_device_add(struct drm_minor *minor) { @@ -167,18 +368,28 @@ int drm_sysfs_device_add(struct drm_minor *minor) minor->kdev.class = drm_class; minor->kdev.release = drm_sysfs_device_release; minor->kdev.devt = minor->device; - minor_str = "card%d"; + if (minor->type == DRM_MINOR_CONTROL) + minor_str = "controlD%d"; + else if (minor->type == DRM_MINOR_RENDER) + minor_str = "renderD%d"; + else + minor_str = "card%d"; snprintf(minor->kdev.bus_id, BUS_ID_SIZE, minor_str, minor->index); + /* Shouldn't register more than once */ + BUG_ON(device_is_registered(&minor->kdev)); + + DRM_DEBUG("registering DRM device \"%s\"\n", minor->kdev.bus_id); + err = device_register(&minor->kdev); if (err) { DRM_ERROR("device add failed: %d\n", err); goto err_out; } - for (i = 0; i < ARRAY_SIZE(device_attrs); i++) { - err = device_create_file(&minor->kdev, &device_attrs[i]); + for (i = 0; i < ARRAY_SIZE(dri_attrs); i++) { + err = device_create_file(&minor->kdev, &dri_attrs[i]); if (err) goto err_out_files; } @@ -188,7 +399,7 @@ int drm_sysfs_device_add(struct drm_minor *minor) err_out_files: if (i > 0) for (j = 0; j < i; j++) - device_remove_file(&minor->kdev, &device_attrs[i]); + device_remove_file(&minor->kdev, &dri_attrs[i]); device_unregister(&minor->kdev); err_out: @@ -206,7 +417,7 @@ void drm_sysfs_device_remove(struct drm_minor *minor) { int i; - for (i = 0; i < ARRAY_SIZE(device_attrs); i++) - device_remove_file(&minor->kdev, &device_attrs[i]); + for (i = 0; i < ARRAY_SIZE(dri_attrs); i++) + device_remove_file(&minor->kdev, &dri_attrs[i]); device_unregister(&minor->kdev); } diff --git a/linux-core/dvo.h b/linux-core/dvo.h new file mode 100644 index 00000000..b122ea1f --- /dev/null +++ b/linux-core/dvo.h @@ -0,0 +1,159 @@ +/* + * Copyright © 2006 Eric Anholt + * + * Permission to use, copy, modify, distribute, and sell this software and its + * documentation for any purpose is hereby granted without fee, provided that + * the above copyright notice appear in all copies and that both that copyright + * notice and this permission notice appear in supporting documentation, and + * that the name of the copyright holders not be used in advertising or + * publicity pertaining to distribution of the software without specific, + * written prior permission. The copyright holders make no representations + * about the suitability of this software for any purpose. It is provided "as + * is" without express or implied warranty. + * + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#ifndef _INTEL_DVO_H +#define _INTEL_DVO_H + +#include <linux/i2c.h> +#include "drmP.h" +#include "drm.h" +#include "drm_crtc.h" +#include "intel_drv.h" + +struct intel_dvo_device { + char *name; + int type; + /* DVOA/B/C output register */ + u32 dvo_reg; + /* GPIO register used for i2c bus to control this device */ + u32 gpio; + int slave_addr; + struct intel_i2c_chan *i2c_bus; + + const struct intel_dvo_dev_ops *dev_ops; + void *dev_priv; + + struct drm_display_mode *panel_fixed_mode; + bool panel_wants_dither; +}; + +struct intel_dvo_dev_ops { + /* + * Initialize the device at startup time. + * Returns NULL if the device does not exist. + */ + bool (*init)(struct intel_dvo_device *dvo, + struct intel_i2c_chan *i2cbus); + + /* + * Called to allow the output a chance to create properties after the + * RandR objects have been created. + */ + void (*create_resources)(struct intel_dvo_device *dvo); + + /* + * Turn on/off output or set intermediate power levels if available. + * + * Unsupported intermediate modes drop to the lower power setting. + * If the mode is DPMSModeOff, the output must be disabled, + * as the DPLL may be disabled afterwards. + */ + void (*dpms)(struct intel_dvo_device *dvo, int mode); + + /* + * Saves the output's state for restoration on VT switch. + */ + void (*save)(struct intel_dvo_device *dvo); + + /* + * Restore's the output's state at VT switch. + */ + void (*restore)(struct intel_dvo_device *dvo); + + /* + * Callback for testing a video mode for a given output. + * + * This function should only check for cases where a mode can't + * be supported on the output specifically, and not represent + * generic CRTC limitations. + * + * \return MODE_OK if the mode is valid, or another MODE_* otherwise. + */ + int (*mode_valid)(struct intel_dvo_device *dvo, + struct drm_display_mode *mode); + + /* + * Callback to adjust the mode to be set in the CRTC. + * + * This allows an output to adjust the clock or even the entire set of + * timings, which is used for panels with fixed timings or for + * buses with clock limitations. + */ + bool (*mode_fixup)(struct intel_dvo_device *dvo, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode); + + /* + * Callback for preparing mode changes on an output + */ + void (*prepare)(struct intel_dvo_device *dvo); + + /* + * Callback for committing mode changes on an output + */ + void (*commit)(struct intel_dvo_device *dvo); + + /* + * Callback for setting up a video mode after fixups have been made. + * + * This is only called while the output is disabled. The dpms callback + * must be all that's necessary for the output, to turn the output on + * after this function is called. + */ + void (*mode_set)(struct intel_dvo_device *dvo, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode); + + /* + * Probe for a connected output, and return detect_status. + */ + enum drm_connector_status (*detect)(struct intel_dvo_device *dvo); + + /** + * Query the device for the modes it provides. + * + * This function may also update MonInfo, mm_width, and mm_height. + * + * \return singly-linked list of modes or NULL if no modes found. + */ + struct drm_display_mode *(*get_modes)(struct intel_dvo_device *dvo); + +#ifdef RANDR_12_INTERFACE + /** + * Callback when an output's property has changed. + */ + bool (*set_property)(struct intel_dvo_device *dvo, + struct drm_property *property, uint64_t val); +#endif + + /** + * Clean up driver-specific bits of the output + */ + void (*destroy) (struct intel_dvo_device *dvo); + + /** + * Debugging hook to dump device registers to log file + */ + void (*dump_regs)(struct intel_dvo_device *dvo); +}; + +#endif /* _INTEL_DVO_H */ diff --git a/linux-core/dvo_ch7017.c b/linux-core/dvo_ch7017.c new file mode 100644 index 00000000..194a7af1 --- /dev/null +++ b/linux-core/dvo_ch7017.c @@ -0,0 +1,454 @@ +/* + * Copyright © 2006 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Authors: + * Eric Anholt <eric@anholt.net> + * + */ + +#include "dvo.h" + +#define CH7017_TV_DISPLAY_MODE 0x00 +#define CH7017_FLICKER_FILTER 0x01 +#define CH7017_VIDEO_BANDWIDTH 0x02 +#define CH7017_TEXT_ENHANCEMENT 0x03 +#define CH7017_START_ACTIVE_VIDEO 0x04 +#define CH7017_HORIZONTAL_POSITION 0x05 +#define CH7017_VERTICAL_POSITION 0x06 +#define CH7017_BLACK_LEVEL 0x07 +#define CH7017_CONTRAST_ENHANCEMENT 0x08 +#define CH7017_TV_PLL 0x09 +#define CH7017_TV_PLL_M 0x0a +#define CH7017_TV_PLL_N 0x0b +#define CH7017_SUB_CARRIER_0 0x0c +#define CH7017_CIV_CONTROL 0x10 +#define CH7017_CIV_0 0x11 +#define CH7017_CHROMA_BOOST 0x14 +#define CH7017_CLOCK_MODE 0x1c +#define CH7017_INPUT_CLOCK 0x1d +#define CH7017_GPIO_CONTROL 0x1e +#define CH7017_INPUT_DATA_FORMAT 0x1f +#define CH7017_CONNECTION_DETECT 0x20 +#define CH7017_DAC_CONTROL 0x21 +#define CH7017_BUFFERED_CLOCK_OUTPUT 0x22 +#define CH7017_DEFEAT_VSYNC 0x47 +#define CH7017_TEST_PATTERN 0x48 + +#define CH7017_POWER_MANAGEMENT 0x49 +/** Enables the TV output path. */ +#define CH7017_TV_EN (1 << 0) +#define CH7017_DAC0_POWER_DOWN (1 << 1) +#define CH7017_DAC1_POWER_DOWN (1 << 2) +#define CH7017_DAC2_POWER_DOWN (1 << 3) +#define CH7017_DAC3_POWER_DOWN (1 << 4) +/** Powers down the TV out block, and DAC0-3 */ +#define CH7017_TV_POWER_DOWN_EN (1 << 5) + +#define CH7017_VERSION_ID 0x4a + +#define CH7017_DEVICE_ID 0x4b +#define CH7017_DEVICE_ID_VALUE 0x1b +#define CH7018_DEVICE_ID_VALUE 0x1a +#define CH7019_DEVICE_ID_VALUE 0x19 + +#define CH7017_XCLK_D2_ADJUST 0x53 +#define CH7017_UP_SCALER_COEFF_0 0x55 +#define CH7017_UP_SCALER_COEFF_1 0x56 +#define CH7017_UP_SCALER_COEFF_2 0x57 +#define CH7017_UP_SCALER_COEFF_3 0x58 +#define CH7017_UP_SCALER_COEFF_4 0x59 +#define CH7017_UP_SCALER_VERTICAL_INC_0 0x5a +#define CH7017_UP_SCALER_VERTICAL_INC_1 0x5b +#define CH7017_GPIO_INVERT 0x5c +#define CH7017_UP_SCALER_HORIZONTAL_INC_0 0x5d +#define CH7017_UP_SCALER_HORIZONTAL_INC_1 0x5e + +#define CH7017_HORIZONTAL_ACTIVE_PIXEL_INPUT 0x5f +/**< Low bits of horizontal active pixel input */ + +#define CH7017_ACTIVE_INPUT_LINE_OUTPUT 0x60 +/** High bits of horizontal active pixel input */ +#define CH7017_LVDS_HAP_INPUT_MASK (0x7 << 0) +/** High bits of vertical active line output */ +#define CH7017_LVDS_VAL_HIGH_MASK (0x7 << 3) + +#define CH7017_VERTICAL_ACTIVE_LINE_OUTPUT 0x61 +/**< Low bits of vertical active line output */ + +#define CH7017_HORIZONTAL_ACTIVE_PIXEL_OUTPUT 0x62 +/**< Low bits of horizontal active pixel output */ + +#define CH7017_LVDS_POWER_DOWN 0x63 +/** High bits of horizontal active pixel output */ +#define CH7017_LVDS_HAP_HIGH_MASK (0x7 << 0) +/** Enables the LVDS power down state transition */ +#define CH7017_LVDS_POWER_DOWN_EN (1 << 6) +/** Enables the LVDS upscaler */ +#define CH7017_LVDS_UPSCALER_EN (1 << 7) +#define CH7017_LVDS_POWER_DOWN_DEFAULT_RESERVED 0x08 + +#define CH7017_LVDS_ENCODING 0x64 +#define CH7017_LVDS_DITHER_2D (1 << 2) +#define CH7017_LVDS_DITHER_DIS (1 << 3) +#define CH7017_LVDS_DUAL_CHANNEL_EN (1 << 4) +#define CH7017_LVDS_24_BIT (1 << 5) + +#define CH7017_LVDS_ENCODING_2 0x65 + +#define CH7017_LVDS_PLL_CONTROL 0x66 +/** Enables the LVDS panel output path */ +#define CH7017_LVDS_PANEN (1 << 0) +/** Enables the LVDS panel backlight */ +#define CH7017_LVDS_BKLEN (1 << 3) + +#define CH7017_POWER_SEQUENCING_T1 0x67 +#define CH7017_POWER_SEQUENCING_T2 0x68 +#define CH7017_POWER_SEQUENCING_T3 0x69 +#define CH7017_POWER_SEQUENCING_T4 0x6a +#define CH7017_POWER_SEQUENCING_T5 0x6b +#define CH7017_GPIO_DRIVER_TYPE 0x6c +#define CH7017_GPIO_DATA 0x6d +#define CH7017_GPIO_DIRECTION_CONTROL 0x6e + +#define CH7017_LVDS_PLL_FEEDBACK_DIV 0x71 +# define CH7017_LVDS_PLL_FEED_BACK_DIVIDER_SHIFT 4 +# define CH7017_LVDS_PLL_FEED_FORWARD_DIVIDER_SHIFT 0 +# define CH7017_LVDS_PLL_FEEDBACK_DEFAULT_RESERVED 0x80 + +#define CH7017_LVDS_PLL_VCO_CONTROL 0x72 +# define CH7017_LVDS_PLL_VCO_DEFAULT_RESERVED 0x80 +# define CH7017_LVDS_PLL_VCO_SHIFT 4 +# define CH7017_LVDS_PLL_POST_SCALE_DIV_SHIFT 0 + +#define CH7017_OUTPUTS_ENABLE 0x73 +# define CH7017_CHARGE_PUMP_LOW 0x0 +# define CH7017_CHARGE_PUMP_HIGH 0x3 +# define CH7017_LVDS_CHANNEL_A (1 << 3) +# define CH7017_LVDS_CHANNEL_B (1 << 4) +# define CH7017_TV_DAC_A (1 << 5) +# define CH7017_TV_DAC_B (1 << 6) +# define CH7017_DDC_SELECT_DC2 (1 << 7) + +#define CH7017_LVDS_OUTPUT_AMPLITUDE 0x74 +#define CH7017_LVDS_PLL_EMI_REDUCTION 0x75 +#define CH7017_LVDS_POWER_DOWN_FLICKER 0x76 + +#define CH7017_LVDS_CONTROL_2 0x78 +# define CH7017_LOOP_FILTER_SHIFT 5 +# define CH7017_PHASE_DETECTOR_SHIFT 0 + +#define CH7017_BANG_LIMIT_CONTROL 0x7f + +struct ch7017_priv { + uint8_t save_hapi; + uint8_t save_vali; + uint8_t save_valo; + uint8_t save_ailo; + uint8_t save_lvds_pll_vco; + uint8_t save_feedback_div; + uint8_t save_lvds_control_2; + uint8_t save_outputs_enable; + uint8_t save_lvds_power_down; + uint8_t save_power_management; +}; + +static void ch7017_dump_regs(struct intel_dvo_device *dvo); +static void ch7017_dpms(struct intel_dvo_device *dvo, int mode); + +static bool ch7017_read(struct intel_dvo_device *dvo, int addr, uint8_t *val) +{ + struct intel_i2c_chan *i2cbus = dvo->i2c_bus; + u8 out_buf[2]; + u8 in_buf[2]; + + struct i2c_msg msgs[] = { + { + .addr = i2cbus->slave_addr, + .flags = 0, + .len = 1, + .buf = out_buf, + }, + { + .addr = i2cbus->slave_addr, + .flags = I2C_M_RD, + .len = 1, + .buf = in_buf, + } + }; + + out_buf[0] = addr; + out_buf[1] = 0; + + if (i2c_transfer(&i2cbus->adapter, msgs, 2) == 2) { + *val= in_buf[0]; + return true; + }; + + return false; +} + +static bool ch7017_write(struct intel_dvo_device *dvo, int addr, uint8_t val) +{ + struct intel_i2c_chan *i2cbus = dvo->i2c_bus; + uint8_t out_buf[2]; + struct i2c_msg msg = { + .addr = i2cbus->slave_addr, + .flags = 0, + .len = 2, + .buf = out_buf, + }; + + out_buf[0] = addr; + out_buf[1] = val; + + if (i2c_transfer(&i2cbus->adapter, &msg, 1) == 1) + return true; + + return false; +} + +/** Probes for a CH7017 on the given bus and slave address. */ +static bool ch7017_init(struct intel_dvo_device *dvo, + struct intel_i2c_chan *i2cbus) +{ + struct ch7017_priv *priv; + uint8_t val; + + priv = kzalloc(sizeof(struct ch7017_priv), GFP_KERNEL); + if (priv == NULL) + return false; + + dvo->i2c_bus = i2cbus; + dvo->i2c_bus->slave_addr = dvo->slave_addr; + dvo->dev_priv = priv; + + if (!ch7017_read(dvo, CH7017_DEVICE_ID, &val)) + goto fail; + + if (val != CH7017_DEVICE_ID_VALUE && + val != CH7018_DEVICE_ID_VALUE && + val != CH7019_DEVICE_ID_VALUE) { + DRM_DEBUG("ch701x not detected, got %d: from %s Slave %d.\n", + val, i2cbus->adapter.name,i2cbus->slave_addr); + goto fail; + } + + return true; +fail: + kfree(priv); + return false; +} + +static enum drm_connector_status ch7017_detect(struct intel_dvo_device *dvo) +{ + return connector_status_unknown; +} + +static enum drm_mode_status ch7017_mode_valid(struct intel_dvo_device *dvo, + struct drm_display_mode *mode) +{ + if (mode->clock > 160000) + return MODE_CLOCK_HIGH; + + return MODE_OK; +} + +static void ch7017_mode_set(struct intel_dvo_device *dvo, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + uint8_t lvds_pll_feedback_div, lvds_pll_vco_control; + uint8_t outputs_enable, lvds_control_2, lvds_power_down; + uint8_t horizontal_active_pixel_input; + uint8_t horizontal_active_pixel_output, vertical_active_line_output; + uint8_t active_input_line_output; + + DRM_DEBUG("Registers before mode setting\n"); + ch7017_dump_regs(dvo); + + /* LVDS PLL settings from page 75 of 7017-7017ds.pdf*/ + if (mode->clock < 100000) { + outputs_enable = CH7017_LVDS_CHANNEL_A | CH7017_CHARGE_PUMP_LOW; + lvds_pll_feedback_div = CH7017_LVDS_PLL_FEEDBACK_DEFAULT_RESERVED | + (2 << CH7017_LVDS_PLL_FEED_BACK_DIVIDER_SHIFT) | + (13 << CH7017_LVDS_PLL_FEED_FORWARD_DIVIDER_SHIFT); + lvds_pll_vco_control = CH7017_LVDS_PLL_VCO_DEFAULT_RESERVED | + (2 << CH7017_LVDS_PLL_VCO_SHIFT) | + (3 << CH7017_LVDS_PLL_POST_SCALE_DIV_SHIFT); + lvds_control_2 = (1 << CH7017_LOOP_FILTER_SHIFT) | + (0 << CH7017_PHASE_DETECTOR_SHIFT); + } else { + outputs_enable = CH7017_LVDS_CHANNEL_A | CH7017_CHARGE_PUMP_HIGH; + lvds_pll_feedback_div = CH7017_LVDS_PLL_FEEDBACK_DEFAULT_RESERVED | + (2 << CH7017_LVDS_PLL_FEED_BACK_DIVIDER_SHIFT) | + (3 << CH7017_LVDS_PLL_FEED_FORWARD_DIVIDER_SHIFT); + lvds_pll_feedback_div = 35; + lvds_control_2 = (3 << CH7017_LOOP_FILTER_SHIFT) | + (0 << CH7017_PHASE_DETECTOR_SHIFT); + if (1) { /* XXX: dual channel panel detection. Assume yes for now. */ + outputs_enable |= CH7017_LVDS_CHANNEL_B; + lvds_pll_vco_control = CH7017_LVDS_PLL_VCO_DEFAULT_RESERVED | + (2 << CH7017_LVDS_PLL_VCO_SHIFT) | + (13 << CH7017_LVDS_PLL_POST_SCALE_DIV_SHIFT); + } else { + lvds_pll_vco_control = CH7017_LVDS_PLL_VCO_DEFAULT_RESERVED | + (1 << CH7017_LVDS_PLL_VCO_SHIFT) | + (13 << CH7017_LVDS_PLL_POST_SCALE_DIV_SHIFT); + } + } + + horizontal_active_pixel_input = mode->hdisplay & 0x00ff; + + vertical_active_line_output = mode->vdisplay & 0x00ff; + horizontal_active_pixel_output = mode->hdisplay & 0x00ff; + + active_input_line_output = ((mode->hdisplay & 0x0700) >> 8) | + (((mode->vdisplay & 0x0700) >> 8) << 3); + + lvds_power_down = CH7017_LVDS_POWER_DOWN_DEFAULT_RESERVED | + (mode->hdisplay & 0x0700) >> 8; + + ch7017_dpms(dvo, DPMSModeOff); + ch7017_write(dvo, CH7017_HORIZONTAL_ACTIVE_PIXEL_INPUT, + horizontal_active_pixel_input); + ch7017_write(dvo, CH7017_HORIZONTAL_ACTIVE_PIXEL_OUTPUT, + horizontal_active_pixel_output); + ch7017_write(dvo, CH7017_VERTICAL_ACTIVE_LINE_OUTPUT, + vertical_active_line_output); + ch7017_write(dvo, CH7017_ACTIVE_INPUT_LINE_OUTPUT, + active_input_line_output); + ch7017_write(dvo, CH7017_LVDS_PLL_VCO_CONTROL, lvds_pll_vco_control); + ch7017_write(dvo, CH7017_LVDS_PLL_FEEDBACK_DIV, lvds_pll_feedback_div); + ch7017_write(dvo, CH7017_LVDS_CONTROL_2, lvds_control_2); + ch7017_write(dvo, CH7017_OUTPUTS_ENABLE, outputs_enable); + + /* Turn the LVDS back on with new settings. */ + ch7017_write(dvo, CH7017_LVDS_POWER_DOWN, lvds_power_down); + + DRM_DEBUG("Registers after mode setting\n"); + ch7017_dump_regs(dvo); +} + +/* set the CH7017 power state */ +static void ch7017_dpms(struct intel_dvo_device *dvo, int mode) +{ + uint8_t val; + + ch7017_read(dvo, CH7017_LVDS_POWER_DOWN, &val); + + /* Turn off TV/VGA, and never turn it on since we don't support it. */ + ch7017_write(dvo, CH7017_POWER_MANAGEMENT, + CH7017_DAC0_POWER_DOWN | + CH7017_DAC1_POWER_DOWN | + CH7017_DAC2_POWER_DOWN | + CH7017_DAC3_POWER_DOWN | + CH7017_TV_POWER_DOWN_EN); + + if (mode == DPMSModeOn) { + /* Turn on the LVDS */ + ch7017_write(dvo, CH7017_LVDS_POWER_DOWN, + val & ~CH7017_LVDS_POWER_DOWN_EN); + } else { + /* Turn off the LVDS */ + ch7017_write(dvo, CH7017_LVDS_POWER_DOWN, + val | CH7017_LVDS_POWER_DOWN_EN); + } + + /* XXX: Should actually wait for update power status somehow */ + udelay(20000); +} + +static void ch7017_dump_regs(struct intel_dvo_device *dvo) +{ + uint8_t val; + +#define DUMP(reg) \ +do { \ + ch7017_read(dvo, reg, &val); \ + DRM_DEBUG(#reg ": %02x\n", val); \ +} while (0) + + DUMP(CH7017_HORIZONTAL_ACTIVE_PIXEL_INPUT); + DUMP(CH7017_HORIZONTAL_ACTIVE_PIXEL_OUTPUT); + DUMP(CH7017_VERTICAL_ACTIVE_LINE_OUTPUT); + DUMP(CH7017_ACTIVE_INPUT_LINE_OUTPUT); + DUMP(CH7017_LVDS_PLL_VCO_CONTROL); + DUMP(CH7017_LVDS_PLL_FEEDBACK_DIV); + DUMP(CH7017_LVDS_CONTROL_2); + DUMP(CH7017_OUTPUTS_ENABLE); + DUMP(CH7017_LVDS_POWER_DOWN); +} + +static void ch7017_save(struct intel_dvo_device *dvo) +{ + struct ch7017_priv *priv = dvo->dev_priv; + + ch7017_read(dvo, CH7017_HORIZONTAL_ACTIVE_PIXEL_INPUT, &priv->save_hapi); + ch7017_read(dvo, CH7017_VERTICAL_ACTIVE_LINE_OUTPUT, &priv->save_valo); + ch7017_read(dvo, CH7017_ACTIVE_INPUT_LINE_OUTPUT, &priv->save_ailo); + ch7017_read(dvo, CH7017_LVDS_PLL_VCO_CONTROL, &priv->save_lvds_pll_vco); + ch7017_read(dvo, CH7017_LVDS_PLL_FEEDBACK_DIV, &priv->save_feedback_div); + ch7017_read(dvo, CH7017_LVDS_CONTROL_2, &priv->save_lvds_control_2); + ch7017_read(dvo, CH7017_OUTPUTS_ENABLE, &priv->save_outputs_enable); + ch7017_read(dvo, CH7017_LVDS_POWER_DOWN, &priv->save_lvds_power_down); + ch7017_read(dvo, CH7017_POWER_MANAGEMENT, &priv->save_power_management); +} + +static void ch7017_restore(struct intel_dvo_device *dvo) +{ + struct ch7017_priv *priv = dvo->dev_priv; + + /* Power down before changing mode */ + ch7017_dpms(dvo, DPMSModeOff); + + ch7017_write(dvo, CH7017_HORIZONTAL_ACTIVE_PIXEL_INPUT, priv->save_hapi); + ch7017_write(dvo, CH7017_VERTICAL_ACTIVE_LINE_OUTPUT, priv->save_valo); + ch7017_write(dvo, CH7017_ACTIVE_INPUT_LINE_OUTPUT, priv->save_ailo); + ch7017_write(dvo, CH7017_LVDS_PLL_VCO_CONTROL, priv->save_lvds_pll_vco); + ch7017_write(dvo, CH7017_LVDS_PLL_FEEDBACK_DIV, priv->save_feedback_div); + ch7017_write(dvo, CH7017_LVDS_CONTROL_2, priv->save_lvds_control_2); + ch7017_write(dvo, CH7017_OUTPUTS_ENABLE, priv->save_outputs_enable); + ch7017_write(dvo, CH7017_LVDS_POWER_DOWN, priv->save_lvds_power_down); + ch7017_write(dvo, CH7017_POWER_MANAGEMENT, priv->save_power_management); +} + +static void ch7017_destroy(struct intel_dvo_device *dvo) +{ + struct ch7017_priv *priv = dvo->dev_priv; + + if (priv) { + kfree(priv); + dvo->dev_priv = NULL; + } +} + +struct intel_dvo_dev_ops ch7017_ops = { + .init = ch7017_init, + .detect = ch7017_detect, + .mode_valid = ch7017_mode_valid, + .mode_set = ch7017_mode_set, + .dpms = ch7017_dpms, + .dump_regs = ch7017_dump_regs, + .save = ch7017_save, + .restore = ch7017_restore, + .destroy = ch7017_destroy, +}; diff --git a/linux-core/dvo_ch7xxx.c b/linux-core/dvo_ch7xxx.c new file mode 100644 index 00000000..18922556 --- /dev/null +++ b/linux-core/dvo_ch7xxx.c @@ -0,0 +1,368 @@ +/************************************************************************** + +Copyright © 2006 Dave Airlie + +All Rights Reserved. + +Permission is hereby granted, free of charge, to any person obtaining a +copy of this software and associated documentation files (the +"Software"), to deal in the Software without restriction, including +without limitation the rights to use, copy, modify, merge, publish, +distribute, sub license, and/or sell copies of the Software, and to +permit persons to whom the Software is furnished to do so, subject to +the following conditions: + +The above copyright notice and this permission notice (including the +next paragraph) shall be included in all copies or substantial portions +of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS +OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF +MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. +IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR +ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, +TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE +SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + +**************************************************************************/ + +#include "dvo.h" + +#define CH7xxx_REG_VID 0x4a +#define CH7xxx_REG_DID 0x4b + +#define CH7011_VID 0x83 /* 7010 as well */ +#define CH7009A_VID 0x84 +#define CH7009B_VID 0x85 +#define CH7301_VID 0x95 + +#define CH7xxx_VID 0x84 +#define CH7xxx_DID 0x17 + +#define CH7xxx_NUM_REGS 0x4c + +#define CH7xxx_CM 0x1c +#define CH7xxx_CM_XCM (1<<0) +#define CH7xxx_CM_MCP (1<<2) +#define CH7xxx_INPUT_CLOCK 0x1d +#define CH7xxx_GPIO 0x1e +#define CH7xxx_GPIO_HPIR (1<<3) +#define CH7xxx_IDF 0x1f + +#define CH7xxx_IDF_HSP (1<<3) +#define CH7xxx_IDF_VSP (1<<4) + +#define CH7xxx_CONNECTION_DETECT 0x20 +#define CH7xxx_CDET_DVI (1<<5) + +#define CH7301_DAC_CNTL 0x21 +#define CH7301_HOTPLUG 0x23 +#define CH7xxx_TCTL 0x31 +#define CH7xxx_TVCO 0x32 +#define CH7xxx_TPCP 0x33 +#define CH7xxx_TPD 0x34 +#define CH7xxx_TPVT 0x35 +#define CH7xxx_TLPF 0x36 +#define CH7xxx_TCT 0x37 +#define CH7301_TEST_PATTERN 0x48 + +#define CH7xxx_PM 0x49 +#define CH7xxx_PM_FPD (1<<0) +#define CH7301_PM_DACPD0 (1<<1) +#define CH7301_PM_DACPD1 (1<<2) +#define CH7301_PM_DACPD2 (1<<3) +#define CH7xxx_PM_DVIL (1<<6) +#define CH7xxx_PM_DVIP (1<<7) + +#define CH7301_SYNC_POLARITY 0x56 +#define CH7301_SYNC_RGB_YUV (1<<0) +#define CH7301_SYNC_POL_DVI (1<<5) + +/** @file + * driver for the Chrontel 7xxx DVI chip over DVO. + */ + +static struct ch7xxx_id_struct { + uint8_t vid; + char *name; +} ch7xxx_ids[] = { + { CH7011_VID, "CH7011" }, + { CH7009A_VID, "CH7009A" }, + { CH7009B_VID, "CH7009B" }, + { CH7301_VID, "CH7301" }, +}; + +struct ch7xxx_reg_state { + uint8_t regs[CH7xxx_NUM_REGS]; +}; + +struct ch7xxx_priv { + bool quiet; + + struct ch7xxx_reg_state save_reg; + struct ch7xxx_reg_state mode_reg; + uint8_t save_TCTL, save_TPCP, save_TPD, save_TPVT; + uint8_t save_TLPF, save_TCT, save_PM, save_IDF; +}; + +static void ch7xxx_save(struct intel_dvo_device *dvo); + +static char *ch7xxx_get_id(uint8_t vid) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(ch7xxx_ids); i++) { + if (ch7xxx_ids[i].vid == vid) + return ch7xxx_ids[i].name; + } + + return NULL; +} + +/** Reads an 8 bit register */ +static bool ch7xxx_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch) +{ + struct ch7xxx_priv *ch7xxx= dvo->dev_priv; + struct intel_i2c_chan *i2cbus = dvo->i2c_bus; + u8 out_buf[2]; + u8 in_buf[2]; + + struct i2c_msg msgs[] = { + { + .addr = i2cbus->slave_addr, + .flags = 0, + .len = 1, + .buf = out_buf, + }, + { + .addr = i2cbus->slave_addr, + .flags = I2C_M_RD, + .len = 1, + .buf = in_buf, + } + }; + + out_buf[0] = addr; + out_buf[1] = 0; + + if (i2c_transfer(&i2cbus->adapter, msgs, 2) == 2) { + *ch = in_buf[0]; + return true; + }; + + if (!ch7xxx->quiet) { + DRM_DEBUG("Unable to read register 0x%02x from %s:%02x.\n", + addr, i2cbus->adapter.name, i2cbus->slave_addr); + } + return false; +} + +/** Writes an 8 bit register */ +static bool ch7xxx_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch) +{ + struct ch7xxx_priv *ch7xxx = dvo->dev_priv; + struct intel_i2c_chan *i2cbus = dvo->i2c_bus; + uint8_t out_buf[2]; + struct i2c_msg msg = { + .addr = i2cbus->slave_addr, + .flags = 0, + .len = 2, + .buf = out_buf, + }; + + out_buf[0] = addr; + out_buf[1] = ch; + + if (i2c_transfer(&i2cbus->adapter, &msg, 1) == 1) + return true; + + if (!ch7xxx->quiet) { + DRM_DEBUG("Unable to write register 0x%02x to %s:%d.\n", + addr, i2cbus->adapter.name, i2cbus->slave_addr); + } + + return false; +} + +static bool ch7xxx_init(struct intel_dvo_device *dvo, + struct intel_i2c_chan *i2cbus) +{ + /* this will detect the CH7xxx chip on the specified i2c bus */ + struct ch7xxx_priv *ch7xxx; + uint8_t vendor, device; + char *name; + + ch7xxx = kzalloc(sizeof(struct ch7xxx_priv), GFP_KERNEL); + if (ch7xxx == NULL) + return false; + + dvo->i2c_bus = i2cbus; + dvo->i2c_bus->slave_addr = dvo->slave_addr; + dvo->dev_priv = ch7xxx; + ch7xxx->quiet = true; + + if (!ch7xxx_readb(dvo, CH7xxx_REG_VID, &vendor)) + goto out; + + name = ch7xxx_get_id(vendor); + if (!name) { + DRM_DEBUG("ch7xxx not detected; got 0x%02x from %s slave %d.\n", + vendor, i2cbus->adapter.name, i2cbus->slave_addr); + goto out; + } + + + if (!ch7xxx_readb(dvo, CH7xxx_REG_DID, &device)) + goto out; + + if (device != CH7xxx_DID) { + DRM_DEBUG("ch7xxx not detected; got 0x%02x from %s slave %d.\n", + vendor, i2cbus->adapter.name, i2cbus->slave_addr); + goto out; + } + + ch7xxx->quiet = FALSE; + DRM_DEBUG("Detected %s chipset, vendor/device ID 0x%02x/0x%02x\n", + name, vendor, device); + return true; +out: + kfree(ch7xxx); + return false; +} + +static enum drm_connector_status ch7xxx_detect(struct intel_dvo_device *dvo) +{ + uint8_t cdet, orig_pm, pm; + + ch7xxx_readb(dvo, CH7xxx_PM, &orig_pm); + + pm = orig_pm; + pm &= ~CH7xxx_PM_FPD; + pm |= CH7xxx_PM_DVIL | CH7xxx_PM_DVIP; + + ch7xxx_writeb(dvo, CH7xxx_PM, pm); + + ch7xxx_readb(dvo, CH7xxx_CONNECTION_DETECT, &cdet); + + ch7xxx_writeb(dvo, CH7xxx_PM, orig_pm); + + if (cdet & CH7xxx_CDET_DVI) + return connector_status_connected; + return connector_status_disconnected; +} + +static enum drm_mode_status ch7xxx_mode_valid(struct intel_dvo_device *dvo, + struct drm_display_mode *mode) +{ + if (mode->clock > 165000) + return MODE_CLOCK_HIGH; + + return MODE_OK; +} + +static void ch7xxx_mode_set(struct intel_dvo_device *dvo, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + uint8_t tvco, tpcp, tpd, tlpf, idf; + + if (mode->clock <= 65000) { + tvco = 0x23; + tpcp = 0x08; + tpd = 0x16; + tlpf = 0x60; + } else { + tvco = 0x2d; + tpcp = 0x06; + tpd = 0x26; + tlpf = 0xa0; + } + + ch7xxx_writeb(dvo, CH7xxx_TCTL, 0x00); + ch7xxx_writeb(dvo, CH7xxx_TVCO, tvco); + ch7xxx_writeb(dvo, CH7xxx_TPCP, tpcp); + ch7xxx_writeb(dvo, CH7xxx_TPD, tpd); + ch7xxx_writeb(dvo, CH7xxx_TPVT, 0x30); + ch7xxx_writeb(dvo, CH7xxx_TLPF, tlpf); + ch7xxx_writeb(dvo, CH7xxx_TCT, 0x00); + + ch7xxx_readb(dvo, CH7xxx_IDF, &idf); + + idf &= ~(CH7xxx_IDF_HSP | CH7xxx_IDF_VSP); + if (mode->flags & V_PHSYNC) + idf |= CH7xxx_IDF_HSP; + + if (mode->flags & V_PVSYNC) + idf |= CH7xxx_IDF_HSP; + + ch7xxx_writeb(dvo, CH7xxx_IDF, idf); +} + +/* set the CH7xxx power state */ +static void ch7xxx_dpms(struct intel_dvo_device *dvo, int mode) +{ + if (mode == DPMSModeOn) + ch7xxx_writeb(dvo, CH7xxx_PM, CH7xxx_PM_DVIL | CH7xxx_PM_DVIP); + else + ch7xxx_writeb(dvo, CH7xxx_PM, CH7xxx_PM_FPD); +} + +static void ch7xxx_dump_regs(struct intel_dvo_device *dvo) +{ + struct ch7xxx_priv *ch7xxx = dvo->dev_priv; + int i; + + for (i = 0; i < CH7xxx_NUM_REGS; i++) { + if ((i % 8) == 0 ) + DRM_DEBUG("\n %02X: ", i); + DRM_DEBUG("%02X ", ch7xxx->mode_reg.regs[i]); + } +} + +static void ch7xxx_save(struct intel_dvo_device *dvo) +{ + struct ch7xxx_priv *ch7xxx= dvo->dev_priv; + + ch7xxx_readb(dvo, CH7xxx_TCTL, &ch7xxx->save_TCTL); + ch7xxx_readb(dvo, CH7xxx_TPCP, &ch7xxx->save_TPCP); + ch7xxx_readb(dvo, CH7xxx_TPD, &ch7xxx->save_TPD); + ch7xxx_readb(dvo, CH7xxx_TPVT, &ch7xxx->save_TPVT); + ch7xxx_readb(dvo, CH7xxx_TLPF, &ch7xxx->save_TLPF); + ch7xxx_readb(dvo, CH7xxx_PM, &ch7xxx->save_PM); + ch7xxx_readb(dvo, CH7xxx_IDF, &ch7xxx->save_IDF); +} + +static void ch7xxx_restore(struct intel_dvo_device *dvo) +{ + struct ch7xxx_priv *ch7xxx = dvo->dev_priv; + + ch7xxx_writeb(dvo, CH7xxx_TCTL, ch7xxx->save_TCTL); + ch7xxx_writeb(dvo, CH7xxx_TPCP, ch7xxx->save_TPCP); + ch7xxx_writeb(dvo, CH7xxx_TPD, ch7xxx->save_TPD); + ch7xxx_writeb(dvo, CH7xxx_TPVT, ch7xxx->save_TPVT); + ch7xxx_writeb(dvo, CH7xxx_TLPF, ch7xxx->save_TLPF); + ch7xxx_writeb(dvo, CH7xxx_IDF, ch7xxx->save_IDF); + ch7xxx_writeb(dvo, CH7xxx_PM, ch7xxx->save_PM); +} + +static void ch7xxx_destroy(struct intel_dvo_device *dvo) +{ + struct ch7xxx_priv *ch7xxx = dvo->dev_priv; + + if (ch7xxx) { + kfree(ch7xxx); + dvo->dev_priv = NULL; + } +} + +struct intel_dvo_dev_ops ch7xxx_ops = { + .init = ch7xxx_init, + .detect = ch7xxx_detect, + .mode_valid = ch7xxx_mode_valid, + .mode_set = ch7xxx_mode_set, + .dpms = ch7xxx_dpms, + .dump_regs = ch7xxx_dump_regs, + .save = ch7xxx_save, + .restore = ch7xxx_restore, + .destroy = ch7xxx_destroy, +}; diff --git a/linux-core/dvo_ivch.c b/linux-core/dvo_ivch.c new file mode 100644 index 00000000..7ba00b34 --- /dev/null +++ b/linux-core/dvo_ivch.c @@ -0,0 +1,463 @@ +/* + * Copyright © 2006 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Authors: + * Eric Anholt <eric@anholt.net> + * + */ + +#include "dvo.h" + +/* + * register definitions for the i82807aa. + * + * Documentation on this chipset can be found in datasheet #29069001 at + * intel.com. + */ + +/* + * VCH Revision & GMBus Base Addr + */ +#define VR00 0x00 +# define VR00_BASE_ADDRESS_MASK 0x007f + +/* + * Functionality Enable + */ +#define VR01 0x01 + +/* + * Enable the panel fitter + */ +# define VR01_PANEL_FIT_ENABLE (1 << 3) +/* + * Enables the LCD display. + * + * This must not be set while VR01_DVO_BYPASS_ENABLE is set. + */ +# define VR01_LCD_ENABLE (1 << 2) +/** Enables the DVO repeater. */ +# define VR01_DVO_BYPASS_ENABLE (1 << 1) +/** Enables the DVO clock */ +# define VR01_DVO_ENABLE (1 << 0) + +/* + * LCD Interface Format + */ +#define VR10 0x10 +/** Enables LVDS output instead of CMOS */ +# define VR10_LVDS_ENABLE (1 << 4) +/** Enables 18-bit LVDS output. */ +# define VR10_INTERFACE_1X18 (0 << 2) +/** Enables 24-bit LVDS or CMOS output */ +# define VR10_INTERFACE_1X24 (1 << 2) +/** Enables 2x18-bit LVDS or CMOS output. */ +# define VR10_INTERFACE_2X18 (2 << 2) +/** Enables 2x24-bit LVDS output */ +# define VR10_INTERFACE_2X24 (3 << 2) + +/* + * VR20 LCD Horizontal Display Size + */ +#define VR20 0x20 + +/* + * LCD Vertical Display Size + */ +#define VR21 0x20 + +/* + * Panel power down status + */ +#define VR30 0x30 +/** Read only bit indicating that the panel is not in a safe poweroff state. */ +# define VR30_PANEL_ON (1 << 15) + +#define VR40 0x40 +# define VR40_STALL_ENABLE (1 << 13) +# define VR40_VERTICAL_INTERP_ENABLE (1 << 12) +# define VR40_ENHANCED_PANEL_FITTING (1 << 11) +# define VR40_HORIZONTAL_INTERP_ENABLE (1 << 10) +# define VR40_AUTO_RATIO_ENABLE (1 << 9) +# define VR40_CLOCK_GATING_ENABLE (1 << 8) + +/* + * Panel Fitting Vertical Ratio + * (((image_height - 1) << 16) / ((panel_height - 1))) >> 2 + */ +#define VR41 0x41 + +/* + * Panel Fitting Horizontal Ratio + * (((image_width - 1) << 16) / ((panel_width - 1))) >> 2 + */ +#define VR42 0x42 + +/* + * Horizontal Image Size + */ +#define VR43 0x43 + +/* VR80 GPIO 0 + */ +#define VR80 0x80 +#define VR81 0x81 +#define VR82 0x82 +#define VR83 0x83 +#define VR84 0x84 +#define VR85 0x85 +#define VR86 0x86 +#define VR87 0x87 + +/* VR88 GPIO 8 + */ +#define VR88 0x88 + +/* Graphics BIOS scratch 0 + */ +#define VR8E 0x8E +# define VR8E_PANEL_TYPE_MASK (0xf << 0) +# define VR8E_PANEL_INTERFACE_CMOS (0 << 4) +# define VR8E_PANEL_INTERFACE_LVDS (1 << 4) +# define VR8E_FORCE_DEFAULT_PANEL (1 << 5) + +/* Graphics BIOS scratch 1 + */ +#define VR8F 0x8F +# define VR8F_VCH_PRESENT (1 << 0) +# define VR8F_DISPLAY_CONN (1 << 1) +# define VR8F_POWER_MASK (0x3c) +# define VR8F_POWER_POS (2) + + +struct ivch_priv { + bool quiet; + + uint16_t width, height; + + uint16_t save_VR01; + uint16_t save_VR40; +}; + +#if 0 +struct vch_capabilities { + struct aimdb_block aimdb_block; + uint8_t panel_type; + uint8_t set_panel_type; + uint8_t slave_address; + uint8_t capabilities; +#define VCH_PANEL_FITTING_SUPPORT (0x3 << 0) +#define VCH_PANEL_FITTING_TEXT (1 << 2) +#define VCH_PANEL_FITTING_GRAPHICS (1 << 3) +#define VCH_PANEL_FITTING_RATIO (1 << 4) +#define VCH_DITHERING (1 << 5) + uint8_t backlight_gpio; + uint8_t set_panel_type_us_gpios; +} __attribute__ ((packed)); +#endif + +static void ivch_dump_regs(struct intel_dvo_device *dvo); + +/** + * Reads a register on the ivch. + * + * Each of the 256 registers are 16 bits long. + */ +static bool ivch_read(struct intel_dvo_device *dvo, int addr, uint16_t *data) +{ + struct ivch_priv *priv = dvo->dev_priv; + struct intel_i2c_chan *i2cbus = dvo->i2c_bus; + u8 out_buf[1]; + u8 in_buf[2]; + + struct i2c_msg msgs[] = { + { + .addr = i2cbus->slave_addr, + .flags = I2C_M_RD, + .len = 0, + }, + { + .addr = 0, + .flags = I2C_M_NOSTART, + .len = 1, + .buf = out_buf, + }, + { + .addr = i2cbus->slave_addr, + .flags = I2C_M_RD | I2C_M_NOSTART, + .len = 2, + .buf = in_buf, + } + }; + + out_buf[0] = addr; + + if (i2c_transfer(&i2cbus->adapter, msgs, 3) == 3) { + *data = (in_buf[1] << 8) | in_buf[0]; + return true; + }; + + if (!priv->quiet) { + DRM_DEBUG("Unable to read register 0x%02x from %s:%02x.\n", + addr, i2cbus->adapter.name, i2cbus->slave_addr); + } + return false; +} + +/** Writes a 16-bit register on the ivch */ +static bool ivch_write(struct intel_dvo_device *dvo, int addr, uint16_t data) +{ + struct ivch_priv *priv = dvo->dev_priv; + struct intel_i2c_chan *i2cbus = dvo->i2c_bus; + u8 out_buf[3]; + struct i2c_msg msg = { + .addr = i2cbus->slave_addr, + .flags = 0, + .len = 3, + .buf = out_buf, + }; + + out_buf[0] = addr; + out_buf[1] = data & 0xff; + out_buf[2] = data >> 8; + + if (i2c_transfer(&i2cbus->adapter, &msg, 1) == 1) + return true; + + if (!priv->quiet) { + DRM_DEBUG("Unable to write register 0x%02x to %s:%d.\n", + addr, i2cbus->adapter.name, i2cbus->slave_addr); + } + + return false; +} + +/** Probes the given bus and slave address for an ivch */ +static bool ivch_init(struct intel_dvo_device *dvo, + struct intel_i2c_chan *i2cbus) +{ + struct ivch_priv *priv; + uint16_t temp; + + priv = kzalloc(sizeof(struct ivch_priv), GFP_KERNEL); + if (priv == NULL) + return false; + + dvo->i2c_bus = i2cbus; + dvo->i2c_bus->slave_addr = dvo->slave_addr; + dvo->dev_priv = priv; + priv->quiet = TRUE; + + if (!ivch_read(dvo, VR00, &temp)) + goto out; + priv->quiet = false; + + /* Since the identification bits are probably zeroes, which doesn't seem + * very unique, check that the value in the base address field matches + * the address it's responding on. + */ + if ((temp & VR00_BASE_ADDRESS_MASK) != dvo->slave_addr) { + DRM_DEBUG("ivch detect failed due to address mismatch " + "(%d vs %d)\n", + (temp & VR00_BASE_ADDRESS_MASK), dvo->slave_addr); + goto out; + } + +#if 0 + if (!xf86I2CDevInit(&priv->d)) { + goto out; + } +#endif + ivch_read(dvo, VR20, &priv->width); + ivch_read(dvo, VR21, &priv->height); + + return true; + +out: + kfree(priv); + return false; +} + +static enum drm_connector_status ivch_detect(struct intel_dvo_device *dvo) +{ + return connector_status_connected; +} + +static enum drm_mode_status ivch_mode_valid(struct intel_dvo_device *dvo, + struct drm_display_mode *mode) +{ + if (mode->clock > 112000) + return MODE_CLOCK_HIGH; + + return MODE_OK; +} + +/** Sets the power state of the panel connected to the ivch */ +static void ivch_dpms(struct intel_dvo_device *dvo, int mode) +{ + int i; + uint16_t vr01, vr30, backlight; + + /* Set the new power state of the panel. */ + if (!ivch_read(dvo, VR01, &vr01)) + return; + + if (mode == DPMSModeOn) + backlight = 1; + else + backlight = 0; + ivch_write(dvo, VR80, backlight); + + if (mode == DPMSModeOn) + vr01 |= VR01_LCD_ENABLE | VR01_DVO_ENABLE; + else + vr01 &= ~(VR01_LCD_ENABLE | VR01_DVO_ENABLE); + + ivch_write(dvo, VR01, vr01); + + /* Wait for the panel to make its state transition */ + for (i = 0; i < 100; i++) { + if (!ivch_read(dvo, VR30, &vr30)) + break; + + if (((vr30 & VR30_PANEL_ON) != 0) == (mode == DPMSModeOn)) + break; + udelay(1000); + } + /* wait some more; vch may fail to resync sometimes without this */ + udelay(16 * 1000); +} + +static void ivch_mode_set(struct intel_dvo_device *dvo, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + uint16_t vr40 = 0; + uint16_t vr01; + + vr01 = 0; + vr40 = (VR40_STALL_ENABLE | VR40_VERTICAL_INTERP_ENABLE | + VR40_HORIZONTAL_INTERP_ENABLE); + + if (mode->hdisplay != adjusted_mode->hdisplay || + mode->vdisplay != adjusted_mode->vdisplay) { + uint16_t x_ratio, y_ratio; + + vr01 |= VR01_PANEL_FIT_ENABLE; + vr40 |= VR40_CLOCK_GATING_ENABLE; + x_ratio = (((mode->hdisplay - 1) << 16) / + (adjusted_mode->hdisplay - 1)) >> 2; + y_ratio = (((mode->vdisplay - 1) << 16) / + (adjusted_mode->vdisplay - 1)) >> 2; + ivch_write (dvo, VR42, x_ratio); + ivch_write (dvo, VR41, y_ratio); + } else { + vr01 &= ~VR01_PANEL_FIT_ENABLE; + vr40 &= ~VR40_CLOCK_GATING_ENABLE; + } + vr40 &= ~VR40_AUTO_RATIO_ENABLE; + + ivch_write(dvo, VR01, vr01); + ivch_write(dvo, VR40, vr40); + + ivch_dump_regs(dvo); +} + +static void ivch_dump_regs(struct intel_dvo_device *dvo) +{ + uint16_t val; + + ivch_read(dvo, VR00, &val); + DRM_DEBUG("VR00: 0x%04x\n", val); + ivch_read(dvo, VR01, &val); + DRM_DEBUG("VR01: 0x%04x\n", val); + ivch_read(dvo, VR30, &val); + DRM_DEBUG("VR30: 0x%04x\n", val); + ivch_read(dvo, VR40, &val); + DRM_DEBUG("VR40: 0x%04x\n", val); + + /* GPIO registers */ + ivch_read(dvo, VR80, &val); + DRM_DEBUG("VR80: 0x%04x\n", val); + ivch_read(dvo, VR81, &val); + DRM_DEBUG("VR81: 0x%04x\n", val); + ivch_read(dvo, VR82, &val); + DRM_DEBUG("VR82: 0x%04x\n", val); + ivch_read(dvo, VR83, &val); + DRM_DEBUG("VR83: 0x%04x\n", val); + ivch_read(dvo, VR84, &val); + DRM_DEBUG("VR84: 0x%04x\n", val); + ivch_read(dvo, VR85, &val); + DRM_DEBUG("VR85: 0x%04x\n", val); + ivch_read(dvo, VR86, &val); + DRM_DEBUG("VR86: 0x%04x\n", val); + ivch_read(dvo, VR87, &val); + DRM_DEBUG("VR87: 0x%04x\n", val); + ivch_read(dvo, VR88, &val); + DRM_DEBUG("VR88: 0x%04x\n", val); + + /* Scratch register 0 - AIM Panel type */ + ivch_read(dvo, VR8E, &val); + DRM_DEBUG("VR8E: 0x%04x\n", val); + + /* Scratch register 1 - Status register */ + ivch_read(dvo, VR8F, &val); + DRM_DEBUG("VR8F: 0x%04x\n", val); +} + +static void ivch_save(struct intel_dvo_device *dvo) +{ + struct ivch_priv *priv = dvo->dev_priv; + + ivch_read(dvo, VR01, &priv->save_VR01); + ivch_read(dvo, VR40, &priv->save_VR40); +} + +static void ivch_restore(struct intel_dvo_device *dvo) +{ + struct ivch_priv *priv = dvo->dev_priv; + + ivch_write(dvo, VR01, priv->save_VR01); + ivch_write(dvo, VR40, priv->save_VR40); +} + +static void ivch_destroy(struct intel_dvo_device *dvo) +{ + struct ivch_priv *priv = dvo->dev_priv; + + if (priv) { + kfree(priv); + dvo->dev_priv = NULL; + } +} + +struct intel_dvo_dev_ops ivch_ops= { + .init = ivch_init, + .dpms = ivch_dpms, + .save = ivch_save, + .restore = ivch_restore, + .mode_valid = ivch_mode_valid, + .mode_set = ivch_mode_set, + .detect = ivch_detect, + .dump_regs = ivch_dump_regs, + .destroy = ivch_destroy, +}; diff --git a/linux-core/dvo_sil164.c b/linux-core/dvo_sil164.c new file mode 100644 index 00000000..d0fa4913 --- /dev/null +++ b/linux-core/dvo_sil164.c @@ -0,0 +1,302 @@ +/************************************************************************** + +Copyright © 2006 Dave Airlie + +All Rights Reserved. + +Permission is hereby granted, free of charge, to any person obtaining a +copy of this software and associated documentation files (the +"Software"), to deal in the Software without restriction, including +without limitation the rights to use, copy, modify, merge, publish, +distribute, sub license, and/or sell copies of the Software, and to +permit persons to whom the Software is furnished to do so, subject to +the following conditions: + +The above copyright notice and this permission notice (including the +next paragraph) shall be included in all copies or substantial portions +of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS +OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF +MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. +IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR +ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, +TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE +SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + +**************************************************************************/ + +#include "dvo.h" + +#define SIL164_VID 0x0001 +#define SIL164_DID 0x0006 + +#define SIL164_VID_LO 0x00 +#define SIL164_VID_HI 0x01 +#define SIL164_DID_LO 0x02 +#define SIL164_DID_HI 0x03 +#define SIL164_REV 0x04 +#define SIL164_RSVD 0x05 +#define SIL164_FREQ_LO 0x06 +#define SIL164_FREQ_HI 0x07 + +#define SIL164_REG8 0x08 +#define SIL164_8_VEN (1<<5) +#define SIL164_8_HEN (1<<4) +#define SIL164_8_DSEL (1<<3) +#define SIL164_8_BSEL (1<<2) +#define SIL164_8_EDGE (1<<1) +#define SIL164_8_PD (1<<0) + +#define SIL164_REG9 0x09 +#define SIL164_9_VLOW (1<<7) +#define SIL164_9_MSEL_MASK (0x7<<4) +#define SIL164_9_TSEL (1<<3) +#define SIL164_9_RSEN (1<<2) +#define SIL164_9_HTPLG (1<<1) +#define SIL164_9_MDI (1<<0) + +#define SIL164_REGC 0x0c + +struct sil164_save_rec { + uint8_t reg8; + uint8_t reg9; + uint8_t regc; +}; + +struct sil164_priv { + //I2CDevRec d; + bool quiet; + struct sil164_save_rec save_regs; + struct sil164_save_rec mode_regs; +}; + +#define SILPTR(d) ((SIL164Ptr)(d->DriverPrivate.ptr)) + +static bool sil164_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch) +{ + struct sil164_priv *sil = dvo->dev_priv; + struct intel_i2c_chan *i2cbus = dvo->i2c_bus; + u8 out_buf[2]; + u8 in_buf[2]; + + struct i2c_msg msgs[] = { + { + .addr = i2cbus->slave_addr, + .flags = 0, + .len = 1, + .buf = out_buf, + }, + { + .addr = i2cbus->slave_addr, + .flags = I2C_M_RD, + .len = 1, + .buf = in_buf, + } + }; + + out_buf[0] = addr; + out_buf[1] = 0; + + if (i2c_transfer(&i2cbus->adapter, msgs, 2) == 2) { + *ch = in_buf[0]; + return true; + }; + + if (!sil->quiet) { + DRM_DEBUG("Unable to read register 0x%02x from %s:%02x.\n", + addr, i2cbus->adapter.name, i2cbus->slave_addr); + } + return false; +} + +static bool sil164_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch) +{ + struct sil164_priv *sil= dvo->dev_priv; + struct intel_i2c_chan *i2cbus = dvo->i2c_bus; + uint8_t out_buf[2]; + struct i2c_msg msg = { + .addr = i2cbus->slave_addr, + .flags = 0, + .len = 2, + .buf = out_buf, + }; + + out_buf[0] = addr; + out_buf[1] = ch; + + if (i2c_transfer(&i2cbus->adapter, &msg, 1) == 1) + return true; + + if (!sil->quiet) { + DRM_DEBUG("Unable to write register 0x%02x to %s:%d.\n", + addr, i2cbus->adapter.name, i2cbus->slave_addr); + } + + return false; +} + +/* Silicon Image 164 driver for chip on i2c bus */ +static bool sil164_init(struct intel_dvo_device *dvo, + struct intel_i2c_chan *i2cbus) +{ + /* this will detect the SIL164 chip on the specified i2c bus */ + struct sil164_priv *sil; + unsigned char ch; + + sil = kzalloc(sizeof(struct sil164_priv), GFP_KERNEL); + if (sil == NULL) + return false; + + dvo->i2c_bus = i2cbus; + dvo->i2c_bus->slave_addr = dvo->slave_addr; + dvo->dev_priv = sil; + sil->quiet = true; + + if (!sil164_readb(dvo, SIL164_VID_LO, &ch)) + goto out; + + if (ch != (SIL164_VID & 0xff)) { + DRM_DEBUG("sil164 not detected got %d: from %s Slave %d.\n", + ch, i2cbus->adapter.name, i2cbus->slave_addr); + goto out; + } + + if (!sil164_readb(dvo, SIL164_DID_LO, &ch)) + goto out; + + if (ch != (SIL164_DID & 0xff)) { + DRM_DEBUG("sil164 not detected got %d: from %s Slave %d.\n", + ch, i2cbus->adapter.name, i2cbus->slave_addr); + goto out; + } + sil->quiet = false; + + DRM_DEBUG("init sil164 dvo controller successfully!\n"); + return true; + +out: + kfree(sil); + return false; +} + +static enum drm_connector_status sil164_detect(struct intel_dvo_device *dvo) +{ + uint8_t reg9; + + sil164_readb(dvo, SIL164_REG9, ®9); + + if (reg9 & SIL164_9_HTPLG) + return connector_status_connected; + else + return connector_status_disconnected; +} + +static enum drm_mode_status sil164_mode_valid(struct intel_dvo_device *dvo, + struct drm_display_mode *mode) +{ + return MODE_OK; +} + +static void sil164_mode_set(struct intel_dvo_device *dvo, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + /* As long as the basics are set up, since we don't have clock + * dependencies in the mode setup, we can just leave the + * registers alone and everything will work fine. + */ + /* recommended programming sequence from doc */ + /*sil164_writeb(sil, 0x08, 0x30); + sil164_writeb(sil, 0x09, 0x00); + sil164_writeb(sil, 0x0a, 0x90); + sil164_writeb(sil, 0x0c, 0x89); + sil164_writeb(sil, 0x08, 0x31);*/ + /* don't do much */ + return; +} + +/* set the SIL164 power state */ +static void sil164_dpms(struct intel_dvo_device *dvo, int mode) +{ + int ret; + unsigned char ch; + + ret = sil164_readb(dvo, SIL164_REG8, &ch); + if (ret == false) + return; + + if (mode == DPMSModeOn) + ch |= SIL164_8_PD; + else + ch &= ~SIL164_8_PD; + + sil164_writeb(dvo, SIL164_REG8, ch); + return; +} + +static void sil164_dump_regs(struct intel_dvo_device *dvo) +{ + uint8_t val; + + sil164_readb(dvo, SIL164_FREQ_LO, &val); + DRM_DEBUG("SIL164_FREQ_LO: 0x%02x\n", val); + sil164_readb(dvo, SIL164_FREQ_HI, &val); + DRM_DEBUG("SIL164_FREQ_HI: 0x%02x\n", val); + sil164_readb(dvo, SIL164_REG8, &val); + DRM_DEBUG("SIL164_REG8: 0x%02x\n", val); + sil164_readb(dvo, SIL164_REG9, &val); + DRM_DEBUG("SIL164_REG9: 0x%02x\n", val); + sil164_readb(dvo, SIL164_REGC, &val); + DRM_DEBUG("SIL164_REGC: 0x%02x\n", val); +} + +static void sil164_save(struct intel_dvo_device *dvo) +{ + struct sil164_priv *sil= dvo->dev_priv; + + if (!sil164_readb(dvo, SIL164_REG8, &sil->save_regs.reg8)) + return; + + if (!sil164_readb(dvo, SIL164_REG9, &sil->save_regs.reg9)) + return; + + if (!sil164_readb(dvo, SIL164_REGC, &sil->save_regs.regc)) + return; + + return; +} + +static void sil164_restore(struct intel_dvo_device *dvo) +{ + struct sil164_priv *sil = dvo->dev_priv; + + /* Restore it powered down initially */ + sil164_writeb(dvo, SIL164_REG8, sil->save_regs.reg8 & ~0x1); + + sil164_writeb(dvo, SIL164_REG9, sil->save_regs.reg9); + sil164_writeb(dvo, SIL164_REGC, sil->save_regs.regc); + sil164_writeb(dvo, SIL164_REG8, sil->save_regs.reg8); +} + +static void sil164_destroy(struct intel_dvo_device *dvo) +{ + struct sil164_priv *sil = dvo->dev_priv; + + if (sil) { + kfree(sil); + dvo->dev_priv = NULL; + } +} + +struct intel_dvo_dev_ops sil164_ops = { + .init = sil164_init, + .detect = sil164_detect, + .mode_valid = sil164_mode_valid, + .mode_set = sil164_mode_set, + .dpms = sil164_dpms, + .dump_regs = sil164_dump_regs, + .save = sil164_save, + .restore = sil164_restore, + .destroy = sil164_destroy, +}; diff --git a/linux-core/dvo_tfp410.c b/linux-core/dvo_tfp410.c new file mode 100644 index 00000000..c1d1aa96 --- /dev/null +++ b/linux-core/dvo_tfp410.c @@ -0,0 +1,335 @@ +/* + * Copyright © 2007 Dave Mueller + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS + * IN THE SOFTWARE. + * + * Authors: + * Dave Mueller <dave.mueller@gmx.ch> + * + */ + +#include "dvo.h" + +/* register definitions according to the TFP410 data sheet */ +#define TFP410_VID 0x014C +#define TFP410_DID 0x0410 + +#define TFP410_VID_LO 0x00 +#define TFP410_VID_HI 0x01 +#define TFP410_DID_LO 0x02 +#define TFP410_DID_HI 0x03 +#define TFP410_REV 0x04 + +#define TFP410_CTL_1 0x08 +#define TFP410_CTL_1_TDIS (1<<6) +#define TFP410_CTL_1_VEN (1<<5) +#define TFP410_CTL_1_HEN (1<<4) +#define TFP410_CTL_1_DSEL (1<<3) +#define TFP410_CTL_1_BSEL (1<<2) +#define TFP410_CTL_1_EDGE (1<<1) +#define TFP410_CTL_1_PD (1<<0) + +#define TFP410_CTL_2 0x09 +#define TFP410_CTL_2_VLOW (1<<7) +#define TFP410_CTL_2_MSEL_MASK (0x7<<4) +#define TFP410_CTL_2_MSEL (1<<4) +#define TFP410_CTL_2_TSEL (1<<3) +#define TFP410_CTL_2_RSEN (1<<2) +#define TFP410_CTL_2_HTPLG (1<<1) +#define TFP410_CTL_2_MDI (1<<0) + +#define TFP410_CTL_3 0x0A +#define TFP410_CTL_3_DK_MASK (0x7<<5) +#define TFP410_CTL_3_DK (1<<5) +#define TFP410_CTL_3_DKEN (1<<4) +#define TFP410_CTL_3_CTL_MASK (0x7<<1) +#define TFP410_CTL_3_CTL (1<<1) + +#define TFP410_USERCFG 0x0B + +#define TFP410_DE_DLY 0x32 + +#define TFP410_DE_CTL 0x33 +#define TFP410_DE_CTL_DEGEN (1<<6) +#define TFP410_DE_CTL_VSPOL (1<<5) +#define TFP410_DE_CTL_HSPOL (1<<4) +#define TFP410_DE_CTL_DEDLY8 (1<<0) + +#define TFP410_DE_TOP 0x34 + +#define TFP410_DE_CNT_LO 0x36 +#define TFP410_DE_CNT_HI 0x37 + +#define TFP410_DE_LIN_LO 0x38 +#define TFP410_DE_LIN_HI 0x39 + +#define TFP410_H_RES_LO 0x3A +#define TFP410_H_RES_HI 0x3B + +#define TFP410_V_RES_LO 0x3C +#define TFP410_V_RES_HI 0x3D + +struct tfp410_save_rec { + uint8_t ctl1; + uint8_t ctl2; +}; + +struct tfp410_priv { + bool quiet; + + struct tfp410_save_rec saved_reg; + struct tfp410_save_rec mode_reg; +}; + +static bool tfp410_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch) +{ + struct tfp410_priv *tfp = dvo->dev_priv; + struct intel_i2c_chan *i2cbus = dvo->i2c_bus; + u8 out_buf[2]; + u8 in_buf[2]; + + struct i2c_msg msgs[] = { + { + .addr = i2cbus->slave_addr, + .flags = 0, + .len = 1, + .buf = out_buf, + }, + { + .addr = i2cbus->slave_addr, + .flags = I2C_M_RD, + .len = 1, + .buf = in_buf, + } + }; + + out_buf[0] = addr; + out_buf[1] = 0; + + if (i2c_transfer(&i2cbus->adapter, msgs, 2) == 2) { + *ch = in_buf[0]; + return true; + }; + + if (!tfp->quiet) { + DRM_DEBUG("Unable to read register 0x%02x from %s:%02x.\n", + addr, i2cbus->adapter.name, i2cbus->slave_addr); + } + return false; +} + +static bool tfp410_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch) +{ + struct tfp410_priv *tfp = dvo->dev_priv; + struct intel_i2c_chan *i2cbus = dvo->i2c_bus; + uint8_t out_buf[2]; + struct i2c_msg msg = { + .addr = i2cbus->slave_addr, + .flags = 0, + .len = 2, + .buf = out_buf, + }; + + out_buf[0] = addr; + out_buf[1] = ch; + + if (i2c_transfer(&i2cbus->adapter, &msg, 1) == 1) + return true; + + if (!tfp->quiet) { + DRM_DEBUG("Unable to write register 0x%02x to %s:%d.\n", + addr, i2cbus->adapter.name, i2cbus->slave_addr); + } + + return false; +} + +static int tfp410_getid(struct intel_dvo_device *dvo, int addr) +{ + uint8_t ch1, ch2; + + if (tfp410_readb(dvo, addr+0, &ch1) && + tfp410_readb(dvo, addr+1, &ch2)) + return ((ch2 << 8) & 0xFF00) | (ch1 & 0x00FF); + + return -1; +} + +/* Ti TFP410 driver for chip on i2c bus */ +static bool tfp410_init(struct intel_dvo_device *dvo, + struct intel_i2c_chan *i2cbus) +{ + /* this will detect the tfp410 chip on the specified i2c bus */ + struct tfp410_priv *tfp; + int id; + + tfp = kzalloc(sizeof(struct tfp410_priv), GFP_KERNEL); + if (tfp == NULL) + return false; + + dvo->i2c_bus = i2cbus; + dvo->i2c_bus->slave_addr = dvo->slave_addr; + dvo->dev_priv = tfp; + tfp->quiet = TRUE; + + if ((id = tfp410_getid(dvo, TFP410_VID_LO)) != TFP410_VID) { + DRM_DEBUG("tfp410 not detected got VID %X: from %s Slave %d.\n", + id, i2cbus->adapter.name, i2cbus->slave_addr); + goto out; + } + + if ((id = tfp410_getid(dvo, TFP410_DID_LO)) != TFP410_DID) { + DRM_DEBUG("tfp410 not detected got DID %X: from %s Slave %d.\n", + id, i2cbus->adapter.name, i2cbus->slave_addr); + goto out; + } + tfp->quiet = FALSE; + return true; +out: + kfree(tfp); + return false; +} + +static enum drm_connector_status tfp410_detect(struct intel_dvo_device *dvo) +{ + enum drm_connector_status ret = connector_status_disconnected; + uint8_t ctl2; + + if (tfp410_readb(dvo, TFP410_CTL_2, &ctl2)) { + if (ctl2 & TFP410_CTL_2_HTPLG) + ret = connector_status_connected; + else + ret = connector_status_disconnected; + } + + return ret; +} + +static enum drm_mode_status tfp410_mode_valid(struct intel_dvo_device *dvo, + struct drm_display_mode *mode) +{ + return MODE_OK; +} + +static void tfp410_mode_set(struct intel_dvo_device *dvo, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + /* As long as the basics are set up, since we don't have clock dependencies + * in the mode setup, we can just leave the registers alone and everything + * will work fine. + */ + /* don't do much */ + return; +} + +/* set the tfp410 power state */ +static void tfp410_dpms(struct intel_dvo_device *dvo, int mode) +{ + uint8_t ctl1; + + if (!tfp410_readb(dvo, TFP410_CTL_1, &ctl1)) + return; + + if (mode == DPMSModeOn) + ctl1 |= TFP410_CTL_1_PD; + else + ctl1 &= ~TFP410_CTL_1_PD; + + tfp410_writeb(dvo, TFP410_CTL_1, ctl1); +} + +static void tfp410_dump_regs(struct intel_dvo_device *dvo) +{ + uint8_t val, val2; + + tfp410_readb(dvo, TFP410_REV, &val); + DRM_DEBUG("TFP410_REV: 0x%02X\n", val); + tfp410_readb(dvo, TFP410_CTL_1, &val); + DRM_DEBUG("TFP410_CTL1: 0x%02X\n", val); + tfp410_readb(dvo, TFP410_CTL_2, &val); + DRM_DEBUG("TFP410_CTL2: 0x%02X\n", val); + tfp410_readb(dvo, TFP410_CTL_3, &val); + DRM_DEBUG("TFP410_CTL3: 0x%02X\n", val); + tfp410_readb(dvo, TFP410_USERCFG, &val); + DRM_DEBUG("TFP410_USERCFG: 0x%02X\n", val); + tfp410_readb(dvo, TFP410_DE_DLY, &val); + DRM_DEBUG("TFP410_DE_DLY: 0x%02X\n", val); + tfp410_readb(dvo, TFP410_DE_CTL, &val); + DRM_DEBUG("TFP410_DE_CTL: 0x%02X\n", val); + tfp410_readb(dvo, TFP410_DE_TOP, &val); + DRM_DEBUG("TFP410_DE_TOP: 0x%02X\n", val); + tfp410_readb(dvo, TFP410_DE_CNT_LO, &val); + tfp410_readb(dvo, TFP410_DE_CNT_HI, &val2); + DRM_DEBUG("TFP410_DE_CNT: 0x%02X%02X\n", val2, val); + tfp410_readb(dvo, TFP410_DE_LIN_LO, &val); + tfp410_readb(dvo, TFP410_DE_LIN_HI, &val2); + DRM_DEBUG("TFP410_DE_LIN: 0x%02X%02X\n", val2, val); + tfp410_readb(dvo, TFP410_H_RES_LO, &val); + tfp410_readb(dvo, TFP410_H_RES_HI, &val2); + DRM_DEBUG("TFP410_H_RES: 0x%02X%02X\n", val2, val); + tfp410_readb(dvo, TFP410_V_RES_LO, &val); + tfp410_readb(dvo, TFP410_V_RES_HI, &val2); + DRM_DEBUG("TFP410_V_RES: 0x%02X%02X\n", val2, val); +} + +static void tfp410_save(struct intel_dvo_device *dvo) +{ + struct tfp410_priv *tfp = dvo->dev_priv; + + if (!tfp410_readb(dvo, TFP410_CTL_1, &tfp->saved_reg.ctl1)) + return; + + if (!tfp410_readb(dvo, TFP410_CTL_2, &tfp->saved_reg.ctl2)) + return; +} + +static void tfp410_restore(struct intel_dvo_device *dvo) +{ + struct tfp410_priv *tfp = dvo->dev_priv; + + /* Restore it powered down initially */ + tfp410_writeb(dvo, TFP410_CTL_1, tfp->saved_reg.ctl1 & ~0x1); + + tfp410_writeb(dvo, TFP410_CTL_2, tfp->saved_reg.ctl2); + tfp410_writeb(dvo, TFP410_CTL_1, tfp->saved_reg.ctl1); +} + +static void tfp410_destroy(struct intel_dvo_device *dvo) +{ + struct tfp410_priv *tfp = dvo->dev_priv; + + if (tfp) { + kfree(tfp); + dvo->dev_priv = NULL; + } +} + +struct intel_dvo_dev_ops tfp410_ops = { + .init = tfp410_init, + .detect = tfp410_detect, + .mode_valid = tfp410_mode_valid, + .mode_set = tfp410_mode_set, + .dpms = tfp410_dpms, + .dump_regs = tfp410_dump_regs, + .save = tfp410_save, + .restore = tfp410_restore, + .destroy = tfp410_destroy, +}; diff --git a/linux-core/i915_buffer.c b/linux-core/i915_buffer.c index 8d991c42..4224b737 100644 --- a/linux-core/i915_buffer.c +++ b/linux-core/i915_buffer.c @@ -89,7 +89,7 @@ int i915_init_mem_type(struct drm_device *dev, uint32_t type, man->drm_bus_maptype = _DRM_AGP; man->gpu_offset = 0; break; - case DRM_BO_MEM_PRIV0: + case DRM_BO_MEM_VRAM: if (!(drm_core_has_AGP(dev) && dev->agp)) { DRM_ERROR("AGP is not enabled for memory type %u\n", (unsigned)type); @@ -103,6 +103,9 @@ int i915_init_mem_type(struct drm_device *dev, uint32_t type, man->drm_bus_maptype = _DRM_AGP; man->gpu_offset = 0; break; + case DRM_BO_MEM_PRIV0: /* for OS preallocated space */ + DRM_ERROR("PRIV0 not used yet.\n"); + break; default: DRM_ERROR("Unsupported memory type %u\n", (unsigned)type); return -EINVAL; @@ -139,7 +142,7 @@ static void i915_emit_copy_blit(struct drm_device * dev, { uint32_t cur_pages; uint32_t stride = PAGE_SIZE; - drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_i915_private *dev_priv = dev->dev_private; RING_LOCALS; if (!dev_priv) @@ -267,10 +270,12 @@ static inline void clflush(volatile void *__p) static inline void drm_cache_flush_addr(void *virt) { +#ifdef cpu_has_clflush int i; for (i = 0; i < PAGE_SIZE; i += boot_cpu_data.x86_clflush_size) clflush(virt+i); +#endif } static inline void drm_cache_flush_page(struct page *p) @@ -288,6 +293,9 @@ void i915_flush_ttm(struct drm_ttm *ttm) DRM_MEMORYBARRIER(); #ifdef CONFIG_X86_32 +#ifndef cpu_has_clflush +#define cpu_has_clflush 0 +#endif /* Hopefully nobody has built an x86-64 processor without clflush */ if (!cpu_has_clflush) { wbinvd(); diff --git a/linux-core/i915_drv.c b/linux-core/i915_drv.c index 3f246a08..8718bd10 100644 --- a/linux-core/i915_drv.c +++ b/linux-core/i915_drv.c @@ -30,6 +30,7 @@ #include "drmP.h" #include "drm.h" #include "i915_drm.h" +#include "intel_drv.h" #include "i915_drv.h" #include "drm_pciids.h" @@ -38,14 +39,23 @@ static struct pci_device_id pciidlist[] = { i915_PCI_IDS }; +unsigned int i915_modeset = 0; +module_param_named(modeset, i915_modeset, int, 0400); + +unsigned int i915_fbpercrtc = 0; +module_param_named(fbpercrtc, i915_fbpercrtc, int, 0400); + +unsigned int i915_rightof = 1; +module_param_named(i915_rightof, i915_rightof, int, 0400); + #ifdef I915_HAVE_FENCE extern struct drm_fence_driver i915_fence_driver; #endif #ifdef I915_HAVE_BUFFER -static uint32_t i915_mem_prios[] = {DRM_BO_MEM_PRIV0, DRM_BO_MEM_TT, DRM_BO_MEM_LOCAL}; -static uint32_t i915_busy_prios[] = {DRM_BO_MEM_TT, DRM_BO_MEM_PRIV0, DRM_BO_MEM_LOCAL}; +static uint32_t i915_mem_prios[] = {DRM_BO_MEM_VRAM, DRM_BO_MEM_TT, DRM_BO_MEM_LOCAL}; +static uint32_t i915_busy_prios[] = {DRM_BO_MEM_TT, DRM_BO_MEM_VRAM, DRM_BO_MEM_LOCAL}; static struct drm_bo_driver i915_bo_driver = { .mem_type_prio = i915_mem_prios, @@ -63,11 +73,6 @@ static struct drm_bo_driver i915_bo_driver = { }; #endif -enum pipe { - PIPE_A = 0, - PIPE_B, -}; - static bool i915_pipe_enabled(struct drm_device *dev, enum pipe pipe) { struct drm_i915_private *dev_priv = dev->dev_private; @@ -304,13 +309,13 @@ static int i915_suspend(struct drm_device *dev, pm_message_t state) dev_priv->saveDSPASTRIDE = I915_READ(DSPASTRIDE); dev_priv->saveDSPASIZE = I915_READ(DSPASIZE); dev_priv->saveDSPAPOS = I915_READ(DSPAPOS); - dev_priv->saveDSPABASE = I915_READ(DSPABASE); + dev_priv->saveDSPAADDR = I915_READ(DSPAADDR); if (IS_I965G(dev)) { dev_priv->saveDSPASURF = I915_READ(DSPASURF); dev_priv->saveDSPATILEOFF = I915_READ(DSPATILEOFF); } i915_save_palette(dev, PIPE_A); - dev_priv->savePIPEASTAT = I915_READ(I915REG_PIPEASTAT); + dev_priv->savePIPEASTAT = I915_READ(PIPEASTAT); /* Pipe & plane B info */ dev_priv->savePIPEBCONF = I915_READ(PIPEBCONF); @@ -332,13 +337,13 @@ static int i915_suspend(struct drm_device *dev, pm_message_t state) dev_priv->saveDSPBSTRIDE = I915_READ(DSPBSTRIDE); dev_priv->saveDSPBSIZE = I915_READ(DSPBSIZE); dev_priv->saveDSPBPOS = I915_READ(DSPBPOS); - dev_priv->saveDSPBBASE = I915_READ(DSPBBASE); + dev_priv->saveDSPBADDR = I915_READ(DSPBADDR); if (IS_I965GM(dev) || IS_IGD_GM(dev)) { dev_priv->saveDSPBSURF = I915_READ(DSPBSURF); dev_priv->saveDSPBTILEOFF = I915_READ(DSPBTILEOFF); } i915_save_palette(dev, PIPE_B); - dev_priv->savePIPEBSTAT = I915_READ(I915REG_PIPEBSTAT); + dev_priv->savePIPEBSTAT = I915_READ(PIPEBSTAT); /* CRT state */ dev_priv->saveADPA = I915_READ(ADPA); @@ -353,9 +358,9 @@ static int i915_suspend(struct drm_device *dev, pm_message_t state) dev_priv->saveLVDS = I915_READ(LVDS); if (!IS_I830(dev) && !IS_845G(dev)) dev_priv->savePFIT_CONTROL = I915_READ(PFIT_CONTROL); - dev_priv->saveLVDSPP_ON = I915_READ(LVDSPP_ON); - dev_priv->saveLVDSPP_OFF = I915_READ(LVDSPP_OFF); - dev_priv->savePP_CYCLE = I915_READ(PP_CYCLE); + dev_priv->savePP_ON_DELAYS = I915_READ(PP_ON_DELAYS); + dev_priv->savePP_OFF_DELAYS = I915_READ(PP_OFF_DELAYS); + dev_priv->savePP_DIVISOR = I915_READ(PP_DIVISOR); /* FIXME: save TV & SDVO state */ @@ -366,19 +371,19 @@ static int i915_suspend(struct drm_device *dev, pm_message_t state) dev_priv->saveFBC_CONTROL = I915_READ(FBC_CONTROL); /* Interrupt state */ - dev_priv->saveIIR = I915_READ(I915REG_INT_IDENTITY_R); - dev_priv->saveIER = I915_READ(I915REG_INT_ENABLE_R); - dev_priv->saveIMR = I915_READ(I915REG_INT_MASK_R); + dev_priv->saveIIR = I915_READ(IIR); + dev_priv->saveIER = I915_READ(IER); + dev_priv->saveIMR = I915_READ(IMR); /* VGA state */ - dev_priv->saveVCLK_DIVISOR_VGA0 = I915_READ(VCLK_DIVISOR_VGA0); - dev_priv->saveVCLK_DIVISOR_VGA1 = I915_READ(VCLK_DIVISOR_VGA1); - dev_priv->saveVCLK_POST_DIV = I915_READ(VCLK_POST_DIV); + dev_priv->saveVGA0 = I915_READ(VGA0); + dev_priv->saveVGA1 = I915_READ(VGA1); + dev_priv->saveVGA_PD = I915_READ(VGA_PD); dev_priv->saveVGACNTRL = I915_READ(VGACNTRL); /* Clock gating state */ dev_priv->saveD_STATE = I915_READ(D_STATE); - dev_priv->saveDSPCLK_GATE_D = I915_READ(DSPCLK_GATE_D); + dev_priv->saveCG_2D_DIS = I915_READ(CG_2D_DIS); /* Cache mode state */ dev_priv->saveCACHE_MODE_0 = I915_READ(CACHE_MODE_0); @@ -388,7 +393,7 @@ static int i915_suspend(struct drm_device *dev, pm_message_t state) /* Scratch space */ for (i = 0; i < 16; i++) { - dev_priv->saveSWF0[i] = I915_READ(SWF0 + (i << 2)); + dev_priv->saveSWF0[i] = I915_READ(SWF00 + (i << 2)); dev_priv->saveSWF1[i] = I915_READ(SWF10 + (i << 2)); } for (i = 0; i < 3; i++) @@ -415,6 +420,8 @@ static int i915_resume(struct drm_device *dev) if (pci_enable_device(dev->pdev)) return -1; + DRM_INFO("resuming i915\n"); + pci_write_config_byte(dev->pdev, LBB, dev_priv->saveLBB); I915_WRITE(DSPARB, dev_priv->saveDSPARB); @@ -448,7 +455,7 @@ static int i915_resume(struct drm_device *dev) I915_WRITE(DSPASIZE, dev_priv->saveDSPASIZE); I915_WRITE(DSPAPOS, dev_priv->saveDSPAPOS); I915_WRITE(PIPEASRC, dev_priv->savePIPEASRC); - I915_WRITE(DSPABASE, dev_priv->saveDSPABASE); + I915_WRITE(DSPAADDR, dev_priv->saveDSPAADDR); I915_WRITE(DSPASTRIDE, dev_priv->saveDSPASTRIDE); if (IS_I965G(dev)) { I915_WRITE(DSPASURF, dev_priv->saveDSPASURF); @@ -460,10 +467,11 @@ static int i915_resume(struct drm_device *dev) i915_restore_palette(dev, PIPE_A); /* Enable the plane */ I915_WRITE(DSPACNTR, dev_priv->saveDSPACNTR); - I915_WRITE(DSPABASE, I915_READ(DSPABASE)); + I915_WRITE(DSPAADDR, I915_READ(DSPAADDR)); /* Pipe & plane B info */ if (dev_priv->saveDPLL_B & DPLL_VCO_ENABLE) { + DRM_INFO("restoring DPLL_B: 0x%08x\n", dev_priv->saveDPLL_B); I915_WRITE(DPLL_B, dev_priv->saveDPLL_B & ~DPLL_VCO_ENABLE); udelay(150); @@ -472,6 +480,7 @@ static int i915_resume(struct drm_device *dev) I915_WRITE(FPB1, dev_priv->saveFPB1); /* Actually enable it */ I915_WRITE(DPLL_B, dev_priv->saveDPLL_B); + DRM_INFO("restoring DPLL_B: 0x%08x\n", dev_priv->saveDPLL_B); udelay(150); if (IS_I965G(dev)) I915_WRITE(DPLL_B_MD, dev_priv->saveDPLL_B_MD); @@ -490,7 +499,7 @@ static int i915_resume(struct drm_device *dev) I915_WRITE(DSPBSIZE, dev_priv->saveDSPBSIZE); I915_WRITE(DSPBPOS, dev_priv->saveDSPBPOS); I915_WRITE(PIPEBSRC, dev_priv->savePIPEBSRC); - I915_WRITE(DSPBBASE, dev_priv->saveDSPBBASE); + I915_WRITE(DSPBADDR, dev_priv->saveDSPBADDR); I915_WRITE(DSPBSTRIDE, dev_priv->saveDSPBSTRIDE); if (IS_I965G(dev)) { I915_WRITE(DSPBSURF, dev_priv->saveDSPBSURF); @@ -502,7 +511,7 @@ static int i915_resume(struct drm_device *dev) i915_restore_palette(dev, PIPE_B); /* Enable the plane */ I915_WRITE(DSPBCNTR, dev_priv->saveDSPBCNTR); - I915_WRITE(DSPBBASE, I915_READ(DSPBBASE)); + I915_WRITE(DSPBADDR, I915_READ(DSPBADDR)); /* CRT state */ I915_WRITE(ADPA, dev_priv->saveADPA); @@ -517,9 +526,9 @@ static int i915_resume(struct drm_device *dev) I915_WRITE(PFIT_PGM_RATIOS, dev_priv->savePFIT_PGM_RATIOS); I915_WRITE(BLC_PWM_CTL, dev_priv->saveBLC_PWM_CTL); - I915_WRITE(LVDSPP_ON, dev_priv->saveLVDSPP_ON); - I915_WRITE(LVDSPP_OFF, dev_priv->saveLVDSPP_OFF); - I915_WRITE(PP_CYCLE, dev_priv->savePP_CYCLE); + I915_WRITE(PP_ON_DELAYS, dev_priv->savePP_ON_DELAYS); + I915_WRITE(PP_OFF_DELAYS, dev_priv->savePP_OFF_DELAYS); + I915_WRITE(PP_DIVISOR, dev_priv->savePP_DIVISOR); I915_WRITE(PP_CONTROL, dev_priv->savePP_CONTROL); /* FIXME: restore TV & SDVO state */ @@ -532,14 +541,14 @@ static int i915_resume(struct drm_device *dev) /* VGA state */ I915_WRITE(VGACNTRL, dev_priv->saveVGACNTRL); - I915_WRITE(VCLK_DIVISOR_VGA0, dev_priv->saveVCLK_DIVISOR_VGA0); - I915_WRITE(VCLK_DIVISOR_VGA1, dev_priv->saveVCLK_DIVISOR_VGA1); - I915_WRITE(VCLK_POST_DIV, dev_priv->saveVCLK_POST_DIV); + I915_WRITE(VGA0, dev_priv->saveVGA0); + I915_WRITE(VGA1, dev_priv->saveVGA1); + I915_WRITE(VGA_PD, dev_priv->saveVGA_PD); udelay(150); /* Clock gating state */ I915_WRITE (D_STATE, dev_priv->saveD_STATE); - I915_WRITE (DSPCLK_GATE_D, dev_priv->saveDSPCLK_GATE_D); + I915_WRITE (CG_2D_DIS, dev_priv->saveCG_2D_DIS); /* Cache mode state */ I915_WRITE (CACHE_MODE_0, dev_priv->saveCACHE_MODE_0 | 0xffff0000); @@ -548,7 +557,7 @@ static int i915_resume(struct drm_device *dev) I915_WRITE (MI_ARB_STATE, dev_priv->saveMI_ARB_STATE | 0xffff0000); for (i = 0; i < 16; i++) { - I915_WRITE(SWF0 + (i << 2), dev_priv->saveSWF0[i]); + I915_WRITE(SWF00 + (i << 2), dev_priv->saveSWF0[i]); I915_WRITE(SWF10 + (i << 2), dev_priv->saveSWF1[i+7]); } for (i = 0; i < 3; i++) @@ -585,6 +594,8 @@ static struct drm_driver driver = { .reclaim_buffers = drm_core_reclaim_buffers, .get_map_ofs = drm_core_get_map_ofs, .get_reg_ofs = drm_core_get_reg_ofs, + .master_create = i915_master_create, + .master_destroy = i915_master_destroy, .ioctls = i915_ioctls, .gem_init_object = i915_gem_init_object, .gem_free_object = i915_gem_free_object, @@ -630,6 +641,9 @@ static int probe(struct pci_dev *pdev, const struct pci_device_id *ent) static int __init i915_init(void) { driver.num_ioctls = i915_max_ioctl; + if (i915_modeset == 1) + driver.driver_features |= DRIVER_MODESET; + return drm_init(&driver, pciidlist); } diff --git a/linux-core/i915_execbuf.c b/linux-core/i915_execbuf.c index 804f3ac1..932882dd 100644 --- a/linux-core/i915_execbuf.c +++ b/linux-core/i915_execbuf.c @@ -819,9 +819,13 @@ void i915_fence_or_sync(struct drm_file *file_priv, int i915_execbuffer(struct drm_device *dev, void *data, struct drm_file *file_priv) { - drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; - drm_i915_sarea_t *sarea_priv = (drm_i915_sarea_t *) - dev_priv->sarea_priv; + struct drm_i915_private *dev_priv = (struct drm_i915_private *) + dev->dev_private; + struct drm_i915_master_private *master_priv = + (struct drm_i915_master_private *) + dev->primary->master->driver_priv; + struct drm_i915_sarea *sarea_priv = (struct drm_i915_sarea *) + master_priv->sarea_priv; struct drm_i915_execbuffer *exec_buf = data; struct drm_i915_batchbuffer *batch = &exec_buf->batch; struct drm_fence_arg *fence_arg = &exec_buf->fence_arg; diff --git a/linux-core/i915_fence.c b/linux-core/i915_fence.c index e403be6a..436b7e1f 100644 --- a/linux-core/i915_fence.c +++ b/linux-core/i915_fence.c @@ -46,7 +46,7 @@ static inline void i915_initiate_rwflush(struct drm_i915_private *dev_priv, dev_priv->flush_sequence = (uint32_t) READ_BREADCRUMB(dev_priv); dev_priv->flush_flags = fc->pending_flush; dev_priv->saved_flush_status = READ_HWSP(dev_priv, 0); - I915_WRITE(I915REG_INSTPM, (1 << 5) | (1 << 21)); + I915_WRITE(INSTPM, (1 << 5) | (1 << 21)); dev_priv->flush_pending = 1; fc->pending_flush &= ~DRM_I915_FENCE_TYPE_RW; } @@ -94,7 +94,7 @@ static void i915_fence_flush(struct drm_device *dev, static void i915_fence_poll(struct drm_device *dev, uint32_t fence_class, uint32_t waiting_types) { - drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; + struct drm_i915_private *dev_priv = (struct drm_i915_private *) dev->dev_private; struct drm_fence_manager *fm = &dev->fm; struct drm_fence_class_manager *fc = &fm->fence_class[0]; uint32_t sequence; @@ -120,11 +120,11 @@ static void i915_fence_poll(struct drm_device *dev, uint32_t fence_class, if (dev_priv->fence_irq_on && !(fc->waiting_types & DRM_FENCE_TYPE_EXE)) { - i915_user_irq_off(dev_priv); + i915_user_irq_off(dev); dev_priv->fence_irq_on = 0; } else if (!dev_priv->fence_irq_on && (fc->waiting_types & DRM_FENCE_TYPE_EXE)) { - i915_user_irq_on(dev_priv); + i915_user_irq_on(dev); dev_priv->fence_irq_on = 1; } } @@ -147,7 +147,7 @@ static int i915_fence_emit_sequence(struct drm_device *dev, uint32_t class, uint32_t flags, uint32_t *sequence, uint32_t *native_type) { - drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; + struct drm_i915_private *dev_priv = (struct drm_i915_private *) dev->dev_private; if (unlikely(!dev_priv)) return -EINVAL; @@ -181,7 +181,7 @@ static int i915_fence_wait(struct drm_fence_object *fence, int lazy, int interruptible, uint32_t mask) { struct drm_device *dev = fence->dev; - drm_i915_private_t *dev_priv = (struct drm_i915_private *) dev->dev_private; + struct drm_i915_private *dev_priv = (struct drm_i915_private *) dev->dev_private; struct drm_fence_manager *fm = &dev->fm; struct drm_fence_class_manager *fc = &fm->fence_class[0]; int ret; diff --git a/linux-core/i915_gem.c b/linux-core/i915_gem.c index d60a98f8..b2870893 100644 --- a/linux-core/i915_gem.c +++ b/linux-core/i915_gem.c @@ -45,7 +45,7 @@ int i915_gem_init_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { - drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_i915_private *dev_priv = dev->dev_private; struct drm_i915_gem_init *args = data; mutex_lock(&dev->struct_mutex); @@ -90,7 +90,7 @@ static void i915_gem_object_move_to_active(struct drm_gem_object *obj) { struct drm_device *dev = obj->dev; - drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_i915_private *dev_priv = dev->dev_private; struct drm_i915_gem_object *obj_priv = obj->driver_private; /* Add a reference if we're newly entering the active list. */ @@ -107,7 +107,7 @@ static void i915_gem_object_move_to_inactive(struct drm_gem_object *obj) { struct drm_device *dev = obj->dev; - drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_i915_private *dev_priv = dev->dev_private; struct drm_i915_gem_object *obj_priv = obj->driver_private; if (obj_priv->pin_count != 0) @@ -132,7 +132,7 @@ i915_gem_object_move_to_inactive(struct drm_gem_object *obj) static uint32_t i915_add_request(struct drm_device *dev, uint32_t flush_domains) { - drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_i915_private *dev_priv = dev->dev_private; struct drm_i915_gem_request *request; uint32_t seqno; RING_LOCALS; @@ -150,8 +150,8 @@ i915_add_request(struct drm_device *dev, uint32_t flush_domains) dev_priv->mm.next_gem_seqno++; BEGIN_LP_RING(4); - OUT_RING(CMD_STORE_DWORD_IDX); - OUT_RING(I915_GEM_HWS_INDEX << STORE_DWORD_INDEX_SHIFT); + OUT_RING(MI_STORE_DWORD_INDEX); + OUT_RING(I915_GEM_HWS_INDEX << MI_STORE_DWORD_INDEX_SHIFT); OUT_RING(seqno); OUT_RING(GFX_OP_USER_INTERRUPT); @@ -180,8 +180,8 @@ i915_add_request(struct drm_device *dev, uint32_t flush_domains) uint32_t i915_retire_commands(struct drm_device *dev) { - drm_i915_private_t *dev_priv = dev->dev_private; - uint32_t cmd = CMD_MI_FLUSH | MI_NO_WRITE_FLUSH; + struct drm_i915_private *dev_priv = dev->dev_private; + uint32_t cmd = MI_FLUSH | MI_NO_WRITE_FLUSH; uint32_t flush_domains = 0; RING_LOCALS; @@ -203,7 +203,7 @@ static void i915_gem_retire_request(struct drm_device *dev, struct drm_i915_gem_request *request) { - drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_i915_private *dev_priv = dev->dev_private; if (request->flush_domains != 0) { struct drm_i915_gem_object *obj_priv, *next; @@ -268,7 +268,7 @@ i915_seqno_passed(uint32_t seq1, uint32_t seq2) static uint32_t i915_get_gem_seqno(struct drm_device *dev) { - drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_i915_private *dev_priv = dev->dev_private; return READ_HWSP(dev_priv, I915_GEM_HWS_INDEX); } @@ -279,7 +279,7 @@ i915_get_gem_seqno(struct drm_device *dev) void i915_gem_retire_requests(struct drm_device *dev) { - drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_i915_private *dev_priv = dev->dev_private; uint32_t seqno; seqno = i915_get_gem_seqno(dev); @@ -307,7 +307,7 @@ void i915_gem_retire_timeout(unsigned long data) { struct drm_device *dev = (struct drm_device *) data; - drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_i915_private *dev_priv = dev->dev_private; schedule_work(&dev_priv->mm.retire_task); } @@ -315,10 +315,10 @@ i915_gem_retire_timeout(unsigned long data) void i915_gem_retire_handler(struct work_struct *work) { - drm_i915_private_t *dev_priv; + struct drm_i915_private *dev_priv; struct drm_device *dev; - dev_priv = container_of(work, drm_i915_private_t, + dev_priv = container_of(work, struct drm_i915_private, mm.retire_task); dev = dev_priv->dev; @@ -336,17 +336,17 @@ i915_gem_retire_handler(struct work_struct *work) int i915_wait_request(struct drm_device *dev, uint32_t seqno) { - drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_i915_private *dev_priv = dev->dev_private; int ret = 0; BUG_ON(seqno == 0); if (!i915_seqno_passed(i915_get_gem_seqno(dev), seqno)) { - i915_user_irq_on(dev_priv); + i915_user_irq_on(dev); ret = wait_event_interruptible(dev_priv->irq_queue, i915_seqno_passed(i915_get_gem_seqno(dev), seqno)); - i915_user_irq_off(dev_priv); + i915_user_irq_off(dev); } if (ret) DRM_ERROR ("%s returns %d (awaiting %d at %d)\n", @@ -368,7 +368,7 @@ i915_gem_flush(struct drm_device *dev, uint32_t invalidate_domains, uint32_t flush_domains) { - drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_i915_private *dev_priv = dev->dev_private; uint32_t cmd; RING_LOCALS; @@ -409,7 +409,7 @@ i915_gem_flush(struct drm_device *dev, * are flushed at any MI_FLUSH. */ - cmd = CMD_MI_FLUSH | MI_NO_WRITE_FLUSH; + cmd = MI_FLUSH | MI_NO_WRITE_FLUSH; if ((invalidate_domains|flush_domains) & DRM_GEM_DOMAIN_I915_RENDER) cmd &= ~MI_NO_WRITE_FLUSH; @@ -581,7 +581,7 @@ i915_gem_dump_object(struct drm_gem_object *obj, int len, static void i915_dump_lru(struct drm_device *dev, const char *where) { - drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_i915_private *dev_priv = dev->dev_private; struct drm_i915_gem_object *obj_priv; DRM_INFO("active list %s {\n", where); @@ -612,7 +612,7 @@ i915_dump_lru(struct drm_device *dev, const char *where) static int i915_gem_evict_something(struct drm_device *dev) { - drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_i915_private *dev_priv = dev->dev_private; struct drm_gem_object *obj; struct drm_i915_gem_object *obj_priv; int ret; @@ -725,7 +725,7 @@ static int i915_gem_object_bind_to_gtt(struct drm_gem_object *obj, unsigned alignment) { struct drm_device *dev = obj->dev; - drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_i915_private *dev_priv = dev->dev_private; struct drm_i915_gem_object *obj_priv = obj->driver_private; struct drm_memrange_node *free_space; int page_count, ret; @@ -1286,7 +1286,7 @@ i915_dispatch_gem_execbuffer(struct drm_device *dev, struct drm_i915_gem_execbuffer *exec, uint64_t exec_offset) { - drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_i915_private *dev_priv = dev->dev_private; struct drm_clip_rect __user *boxes = (struct drm_clip_rect __user *) (uintptr_t) exec->cliprects_ptr; int nbox = exec->num_cliprects; @@ -1351,7 +1351,7 @@ i915_dispatch_gem_execbuffer(struct drm_device *dev, static int i915_gem_ring_throttle(struct drm_device *dev) { - drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_i915_private *dev_priv = dev->dev_private; int ret = 0; mutex_lock(&dev->struct_mutex); @@ -1696,11 +1696,11 @@ i915_gem_set_domain(struct drm_gem_object *obj, i915_kernel_lost_context(dev); ret = i915_gem_object_set_domain(obj, read_domains, write_domain); if (ret) { - drm_client_lock_release(dev); + drm_client_lock_release(dev, file_priv); return ret; } i915_gem_dev_set_domain(obj->dev); - drm_client_lock_release(dev); + drm_client_lock_release(dev, file_priv); return 0; } @@ -1733,7 +1733,7 @@ i915_gem_flush_pwrite(struct drm_gem_object *obj, void i915_gem_lastclose(struct drm_device *dev) { - drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_i915_private *dev_priv = dev->dev_private; mutex_lock(&dev->struct_mutex); diff --git a/linux-core/i915_init.c b/linux-core/i915_init.c new file mode 120000 index 00000000..473ddf7b --- /dev/null +++ b/linux-core/i915_init.c @@ -0,0 +1 @@ +../shared-core/i915_init.c
\ No newline at end of file diff --git a/linux-core/intel_bios.c b/linux-core/intel_bios.c new file mode 100644 index 00000000..0cdc915c --- /dev/null +++ b/linux-core/intel_bios.c @@ -0,0 +1,242 @@ +/* + * Copyright © 2006 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + * + * Authors: + * Eric Anholt <eric@anholt.net> + * + */ +#include "drmP.h" +#include "drm.h" +#include "i915_drm.h" +#include "i915_drv.h" +#include "intel_bios.h" + +#if 0 +unsigned char * +i830_bios_get_aim_data_block (ScrnInfoPtr pScrn, int aim, int data_block) +{ + unsigned char *bios; + int bdb_off; + int vbt_off; + int aim_off; + struct vbt_header *vbt; + struct aimdb_header *aimdb; + struct aimdb_block *aimdb_block; + + bios = i830_bios_get (pScrn); + if (!bios) + return NULL; + + vbt_off = INTEL_BIOS_16(0x1a); + vbt = (struct vbt_header *)(bios + vbt_off); + + aim_off = vbt->aim_offset[aim]; + if (!aim_off) + { + free (bios); + return NULL; + } + xf86DrvMsg(pScrn->scrnIndex, X_INFO, "aim_off %d\n", aim_off); + aimdb = (struct aimdb_header *) (bios + vbt_off + aim_off); + bdb_off = aimdb->aimdb_header_size; + while (bdb_off < aimdb->aimdb_size) + { + aimdb_block = (struct aimdb_block *) (bios + vbt_off + aim_off + bdb_off); + if (aimdb_block->aimdb_id == data_block) + { + unsigned char *aim = malloc (aimdb_block->aimdb_size + sizeof (struct aimdb_block)); + if (!aim) + { + free (bios); + return NULL; + } + memcpy (aim, aimdb_block, aimdb_block->aimdb_size + sizeof (struct aimdb_block)); + free (bios); + return aim; + } + bdb_off += aimdb_block->aimdb_size + sizeof (struct aimdb_block); + } + free (bios); + return NULL; +} +#endif + +static void * +find_section(struct bdb_header *bdb, int section_id) +{ + u8 *base = (u8 *)bdb; + int index = 0; + u16 total, current_size; + u8 current_id; + + /* skip to first section */ + index += bdb->header_size; + total = bdb->bdb_size; + + /* walk the sections looking for section_id */ + while (index < total) { + current_id = *(base + index); + index++; + current_size = *((u16 *)(base + index)); + index += 2; + if (current_id == section_id) + return base + index; + index += current_size; + } + + return NULL; +} + +/* Try to find panel data */ +static void +parse_panel_data(struct drm_i915_private *dev_priv, struct bdb_header *bdb) +{ + struct bdb_lvds_options *lvds_options; + struct bdb_lvds_lfp_data *lvds_lfp_data; + struct bdb_lvds_lfp_data_entry *entry; + struct lvds_dvo_timing *dvo_timing; + struct drm_display_mode *panel_fixed_mode; + + /* Defaults if we can't find VBT info */ + dev_priv->lvds_dither = 0; + dev_priv->lvds_vbt = 0; + + lvds_options = find_section(bdb, BDB_LVDS_OPTIONS); + if (!lvds_options) + return; + + dev_priv->lvds_dither = lvds_options->pixel_dither; + if (lvds_options->panel_type == 0xff) + return; + + lvds_lfp_data = find_section(bdb, BDB_LVDS_LFP_DATA); + if (!lvds_lfp_data) + return; + + dev_priv->lvds_vbt = 1; + + entry = &lvds_lfp_data->data[lvds_options->panel_type]; + dvo_timing = &entry->dvo_timing; + + panel_fixed_mode = drm_calloc(1, sizeof(*panel_fixed_mode), + DRM_MEM_DRIVER); + + panel_fixed_mode->hdisplay = (dvo_timing->hactive_hi << 8) | + dvo_timing->hactive_lo; + panel_fixed_mode->hsync_start = panel_fixed_mode->hdisplay + + ((dvo_timing->hsync_off_hi << 8) | dvo_timing->hsync_off_lo); + panel_fixed_mode->hsync_end = panel_fixed_mode->hsync_start + + dvo_timing->hsync_pulse_width; + panel_fixed_mode->htotal = panel_fixed_mode->hdisplay + + ((dvo_timing->hblank_hi << 8) | dvo_timing->hblank_lo); + + panel_fixed_mode->vdisplay = (dvo_timing->vactive_hi << 8) | + dvo_timing->vactive_lo; + panel_fixed_mode->vsync_start = panel_fixed_mode->vdisplay + + dvo_timing->vsync_off; + panel_fixed_mode->vsync_end = panel_fixed_mode->vsync_start + + dvo_timing->vsync_pulse_width; + panel_fixed_mode->vtotal = panel_fixed_mode->vdisplay + + ((dvo_timing->vblank_hi << 8) | dvo_timing->vblank_lo); + panel_fixed_mode->clock = dvo_timing->clock * 10; + panel_fixed_mode->type = DRM_MODE_TYPE_PREFERRED; + + drm_mode_set_name(panel_fixed_mode); + + dev_priv->vbt_mode = panel_fixed_mode; + + DRM_DEBUG("Found panel mode in BIOS VBT tables:\n"); + drm_mode_debug_printmodeline(panel_fixed_mode); + + return; +} + +static void +parse_general_features(struct drm_i915_private *dev_priv, + struct bdb_header *bdb) +{ + struct bdb_general_features *general; + + /* Set sensible defaults in case we can't find the general block */ + dev_priv->int_tv_support = 1; + dev_priv->int_crt_support = 1; + + general = find_section(bdb, BDB_GENERAL_FEATURES); + if (general) { + dev_priv->int_tv_support = general->int_tv_support; + dev_priv->int_crt_support = general->int_crt_support; + } +} + +/** + * intel_init_bios - initialize VBIOS settings & find VBT + * @dev: DRM device + * + * Loads the Video BIOS and checks that the VBT exists. Sets scratch registers + * to appropriate values. + * + * VBT existence is a sanity check that is relied on by other i830_bios.c code. + * Note that it would be better to use a BIOS call to get the VBT, as BIOSes may + * feed an updated VBT back through that, compared to what we'll fetch using + * this method of groping around in the BIOS data. + * + * Returns 0 on success, nonzero on failure. + */ +bool +intel_init_bios(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct pci_dev *pdev = dev->pdev; + struct vbt_header *vbt = NULL; + struct bdb_header *bdb; + u8 __iomem *bios; + size_t size; + int i; + + bios = pci_map_rom(pdev, &size); + if (!bios) + return -1; + + /* Scour memory looking for the VBT signature */ + for (i = 0; i + 4 < size; i++) { + if (!memcmp(bios + i, "$VBT", 4)) { + vbt = (struct vbt_header *)(bios + i); + break; + } + } + + if (!vbt) { + DRM_ERROR("VBT signature missing\n"); + pci_unmap_rom(pdev, bios); + return -1; + } + + bdb = (struct bdb_header *)(bios + i + vbt->bdb_offset); + + /* Grab useful general definitions */ + parse_general_features(dev_priv, bdb); + parse_panel_data(dev_priv, bdb); + + pci_unmap_rom(pdev, bios); + + return 0; +} diff --git a/linux-core/intel_bios.h b/linux-core/intel_bios.h new file mode 100644 index 00000000..5ea715ac --- /dev/null +++ b/linux-core/intel_bios.h @@ -0,0 +1,405 @@ +/* + * Copyright © 2006 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + * + * Authors: + * Eric Anholt <eric@anholt.net> + * + */ + +#ifndef _I830_BIOS_H_ +#define _I830_BIOS_H_ + +#include "drmP.h" + +struct vbt_header { + u8 signature[20]; /**< Always starts with 'VBT$' */ + u16 version; /**< decimal */ + u16 header_size; /**< in bytes */ + u16 vbt_size; /**< in bytes */ + u8 vbt_checksum; + u8 reserved0; + u32 bdb_offset; /**< from beginning of VBT */ + u32 aim_offset[4]; /**< from beginning of VBT */ +} __attribute__((packed)); + +struct bdb_header { + u8 signature[16]; /**< Always 'BIOS_DATA_BLOCK' */ + u16 version; /**< decimal */ + u16 header_size; /**< in bytes */ + u16 bdb_size; /**< in bytes */ +}; + +/* strictly speaking, this is a "skip" block, but it has interesting info */ +struct vbios_data { + u8 type; /* 0 == desktop, 1 == mobile */ + u8 relstage; + u8 chipset; + u8 lvds_present:1; + u8 tv_present:1; + u8 rsvd2:6; /* finish byte */ + u8 rsvd3[4]; + u8 signon[155]; + u8 copyright[61]; + u16 code_segment; + u8 dos_boot_mode; + u8 bandwidth_percent; + u8 rsvd4; /* popup memory size */ + u8 resize_pci_bios; + u8 rsvd5; /* is crt already on ddc2 */ +} __attribute__((packed)); + +/* + * There are several types of BIOS data blocks (BDBs), each block has + * an ID and size in the first 3 bytes (ID in first, size in next 2). + * Known types are listed below. + */ +#define BDB_GENERAL_FEATURES 1 +#define BDB_GENERAL_DEFINITIONS 2 +#define BDB_OLD_TOGGLE_LIST 3 +#define BDB_MODE_SUPPORT_LIST 4 +#define BDB_GENERIC_MODE_TABLE 5 +#define BDB_EXT_MMIO_REGS 6 +#define BDB_SWF_IO 7 +#define BDB_SWF_MMIO 8 +#define BDB_DOT_CLOCK_TABLE 9 +#define BDB_MODE_REMOVAL_TABLE 10 +#define BDB_CHILD_DEVICE_TABLE 11 +#define BDB_DRIVER_FEATURES 12 +#define BDB_DRIVER_PERSISTENCE 13 +#define BDB_EXT_TABLE_PTRS 14 +#define BDB_DOT_CLOCK_OVERRIDE 15 +#define BDB_DISPLAY_SELECT 16 +/* 17 rsvd */ +#define BDB_DRIVER_ROTATION 18 +#define BDB_DISPLAY_REMOVE 19 +#define BDB_OEM_CUSTOM 20 +#define BDB_EFP_LIST 21 /* workarounds for VGA hsync/vsync */ +#define BDB_SDVO_LVDS_OPTIONS 22 +#define BDB_SDVO_PANEL_DTDS 23 +#define BDB_SDVO_LVDS_PNP_IDS 24 +#define BDB_SDVO_LVDS_POWER_SEQ 25 +#define BDB_TV_OPTIONS 26 +#define BDB_LVDS_OPTIONS 40 +#define BDB_LVDS_LFP_DATA_PTRS 41 +#define BDB_LVDS_LFP_DATA 42 +#define BDB_LVDS_BACKLIGHT 43 +#define BDB_LVDS_POWER 44 +#define BDB_SKIP 254 /* VBIOS private block, ignore */ + +struct bdb_general_features { + /* bits 1 */ + u8 panel_fitting:2; + u8 flexaim:1; + u8 msg_enable:1; + u8 clear_screen:3; + u8 color_flip:1; + + /* bits 2 */ + u8 download_ext_vbt:1; + u8 enable_ssc:1; + u8 ssc_freq:1; + u8 enable_lfp_on_override:1; + u8 disable_ssc_ddt:1; + u8 rsvd8:3; /* finish byte */ + + /* bits 3 */ + u8 disable_smooth_vision:1; + u8 single_dvi:1; + u8 rsvd9:6; /* finish byte */ + + /* bits 4 */ + u8 legacy_monitor_detect; + + /* bits 5 */ + u8 int_crt_support:1; + u8 int_tv_support:1; + u8 rsvd11:6; /* finish byte */ +} __attribute__((packed)); + +struct bdb_general_definitions { + /* DDC GPIO */ + u8 crt_ddc_gmbus_pin; + + /* DPMS bits */ + u8 dpms_acpi:1; + u8 skip_boot_crt_detect:1; + u8 dpms_aim:1; + u8 rsvd1:5; /* finish byte */ + + /* boot device bits */ + u8 boot_display[2]; + u8 child_dev_size; + + /* device info */ + u8 tv_or_lvds_info[33]; + u8 dev1[33]; + u8 dev2[33]; + u8 dev3[33]; + u8 dev4[33]; + /* may be another device block here on some platforms */ +}; + +struct bdb_lvds_options { + u8 panel_type; + u8 rsvd1; + /* LVDS capabilities, stored in a dword */ + u8 rsvd2:1; + u8 lvds_edid:1; + u8 pixel_dither:1; + u8 pfit_ratio_auto:1; + u8 pfit_gfx_mode_enhanced:1; + u8 pfit_text_mode_enhanced:1; + u8 pfit_mode:2; + u8 rsvd4; +} __attribute__((packed)); + +/* LFP pointer table contains entries to the struct below */ +struct bdb_lvds_lfp_data_ptr { + u16 fp_timing_offset; /* offsets are from start of bdb */ + u8 fp_table_size; + u16 dvo_timing_offset; + u8 dvo_table_size; + u16 panel_pnp_id_offset; + u8 pnp_table_size; +} __attribute__((packed)); + +struct bdb_lvds_lfp_data_ptrs { + u8 lvds_entries; /* followed by one or more lvds_data_ptr structs */ + struct bdb_lvds_lfp_data_ptr ptr[16]; +} __attribute__((packed)); + +/* LFP data has 3 blocks per entry */ +struct lvds_fp_timing { + u16 x_res; + u16 y_res; + u32 lvds_reg; + u32 lvds_reg_val; + u32 pp_on_reg; + u32 pp_on_reg_val; + u32 pp_off_reg; + u32 pp_off_reg_val; + u32 pp_cycle_reg; + u32 pp_cycle_reg_val; + u32 pfit_reg; + u32 pfit_reg_val; + u16 terminator; +} __attribute__((packed)); + +struct lvds_dvo_timing { + u16 clock; /**< In 10khz */ + u8 hactive_lo; + u8 hblank_lo; + u8 hblank_hi:4; + u8 hactive_hi:4; + u8 vactive_lo; + u8 vblank_lo; + u8 vblank_hi:4; + u8 vactive_hi:4; + u8 hsync_off_lo; + u8 hsync_pulse_width; + u8 vsync_pulse_width:4; + u8 vsync_off:4; + u8 rsvd0:6; + u8 hsync_off_hi:2; + u8 h_image; + u8 v_image; + u8 max_hv; + u8 h_border; + u8 v_border; + u8 rsvd1:3; + u8 digital:2; + u8 vsync_positive:1; + u8 hsync_positive:1; + u8 rsvd2:1; +} __attribute__((packed)); + +struct lvds_pnp_id { + u16 mfg_name; + u16 product_code; + u32 serial; + u8 mfg_week; + u8 mfg_year; +} __attribute__((packed)); + +struct bdb_lvds_lfp_data_entry { + struct lvds_fp_timing fp_timing; + struct lvds_dvo_timing dvo_timing; + struct lvds_pnp_id pnp_id; +} __attribute__((packed)); + +struct bdb_lvds_lfp_data { + struct bdb_lvds_lfp_data_entry data[16]; +} __attribute__((packed)); + +struct aimdb_header { + char signature[16]; + char oem_device[20]; + u16 aimdb_version; + u16 aimdb_header_size; + u16 aimdb_size; +} __attribute__((packed)); + +struct aimdb_block { + u8 aimdb_id; + u16 aimdb_size; +} __attribute__((packed)); + +struct vch_panel_data { + u16 fp_timing_offset; + u8 fp_timing_size; + u16 dvo_timing_offset; + u8 dvo_timing_size; + u16 text_fitting_offset; + u8 text_fitting_size; + u16 graphics_fitting_offset; + u8 graphics_fitting_size; +} __attribute__((packed)); + +struct vch_bdb_22 { + struct aimdb_block aimdb_block; + struct vch_panel_data panels[16]; +} __attribute__((packed)); + +bool intel_init_bios(struct drm_device *dev); + +/* + * Driver<->VBIOS interaction occurs through scratch bits in + * GR18 & SWF*. + */ + +/* GR18 bits are set on display switch and hotkey events */ +#define GR18_DRIVER_SWITCH_EN (1<<7) /* 0: VBIOS control, 1: driver control */ +#define GR18_HOTKEY_MASK 0x78 /* See also SWF4 15:0 */ +#define GR18_HK_NONE (0x0<<3) +#define GR18_HK_LFP_STRETCH (0x1<<3) +#define GR18_HK_TOGGLE_DISP (0x2<<3) +#define GR18_HK_DISP_SWITCH (0x4<<3) /* see SWF14 15:0 for what to enable */ +#define GR18_HK_POPUP_DISABLED (0x6<<3) +#define GR18_HK_POPUP_ENABLED (0x7<<3) +#define GR18_HK_PFIT (0x8<<3) +#define GR18_HK_APM_CHANGE (0xa<<3) +#define GR18_HK_MULTIPLE (0xc<<3) +#define GR18_USER_INT_EN (1<<2) +#define GR18_A0000_FLUSH_EN (1<<1) +#define GR18_SMM_EN (1<<0) + +/* Set by driver, cleared by VBIOS */ +#define SWF00_YRES_SHIFT 16 +#define SWF00_XRES_SHIFT 0 +#define SWF00_RES_MASK 0xffff + +/* Set by VBIOS at boot time and driver at runtime */ +#define SWF01_TV2_FORMAT_SHIFT 8 +#define SWF01_TV1_FORMAT_SHIFT 0 +#define SWF01_TV_FORMAT_MASK 0xffff + +#define SWF10_VBIOS_BLC_I2C_EN (1<<29) +#define SWF10_GTT_OVERRIDE_EN (1<<28) +#define SWF10_LFP_DPMS_OVR (1<<27) /* override DPMS on display switch */ +#define SWF10_ACTIVE_TOGGLE_LIST_MASK (7<<24) +#define SWF10_OLD_TOGGLE 0x0 +#define SWF10_TOGGLE_LIST_1 0x1 +#define SWF10_TOGGLE_LIST_2 0x2 +#define SWF10_TOGGLE_LIST_3 0x3 +#define SWF10_TOGGLE_LIST_4 0x4 +#define SWF10_PANNING_EN (1<<23) +#define SWF10_DRIVER_LOADED (1<<22) +#define SWF10_EXTENDED_DESKTOP (1<<21) +#define SWF10_EXCLUSIVE_MODE (1<<20) +#define SWF10_OVERLAY_EN (1<<19) +#define SWF10_PLANEB_HOLDOFF (1<<18) +#define SWF10_PLANEA_HOLDOFF (1<<17) +#define SWF10_VGA_HOLDOFF (1<<16) +#define SWF10_ACTIVE_DISP_MASK 0xffff +#define SWF10_PIPEB_LFP2 (1<<15) +#define SWF10_PIPEB_EFP2 (1<<14) +#define SWF10_PIPEB_TV2 (1<<13) +#define SWF10_PIPEB_CRT2 (1<<12) +#define SWF10_PIPEB_LFP (1<<11) +#define SWF10_PIPEB_EFP (1<<10) +#define SWF10_PIPEB_TV (1<<9) +#define SWF10_PIPEB_CRT (1<<8) +#define SWF10_PIPEA_LFP2 (1<<7) +#define SWF10_PIPEA_EFP2 (1<<6) +#define SWF10_PIPEA_TV2 (1<<5) +#define SWF10_PIPEA_CRT2 (1<<4) +#define SWF10_PIPEA_LFP (1<<3) +#define SWF10_PIPEA_EFP (1<<2) +#define SWF10_PIPEA_TV (1<<1) +#define SWF10_PIPEA_CRT (1<<0) + +#define SWF11_MEMORY_SIZE_SHIFT 16 +#define SWF11_SV_TEST_EN (1<<15) +#define SWF11_IS_AGP (1<<14) +#define SWF11_DISPLAY_HOLDOFF (1<<13) +#define SWF11_DPMS_REDUCED (1<<12) +#define SWF11_IS_VBE_MODE (1<<11) +#define SWF11_PIPEB_ACCESS (1<<10) /* 0 here means pipe a */ +#define SWF11_DPMS_MASK 0x07 +#define SWF11_DPMS_OFF (1<<2) +#define SWF11_DPMS_SUSPEND (1<<1) +#define SWF11_DPMS_STANDBY (1<<0) +#define SWF11_DPMS_ON 0 + +#define SWF14_GFX_PFIT_EN (1<<31) +#define SWF14_TEXT_PFIT_EN (1<<30) +#define SWF14_LID_STATUS_CLOSED (1<<29) /* 0 here means open */ +#define SWF14_POPUP_EN (1<<28) +#define SWF14_DISPLAY_HOLDOFF (1<<27) +#define SWF14_DISP_DETECT_EN (1<<26) +#define SWF14_DOCKING_STATUS_DOCKED (1<<25) /* 0 here means undocked */ +#define SWF14_DRIVER_STATUS (1<<24) +#define SWF14_OS_TYPE_WIN9X (1<<23) +#define SWF14_OS_TYPE_WINNT (1<<22) +/* 21:19 rsvd */ +#define SWF14_PM_TYPE_MASK 0x00070000 +#define SWF14_PM_ACPI_VIDEO (0x4 << 16) +#define SWF14_PM_ACPI (0x3 << 16) +#define SWF14_PM_APM_12 (0x2 << 16) +#define SWF14_PM_APM_11 (0x1 << 16) +#define SWF14_HK_REQUEST_MASK 0x0000ffff /* see GR18 6:3 for event type */ + /* if GR18 indicates a display switch */ +#define SWF14_DS_PIPEB_LFP2_EN (1<<15) +#define SWF14_DS_PIPEB_EFP2_EN (1<<14) +#define SWF14_DS_PIPEB_TV2_EN (1<<13) +#define SWF14_DS_PIPEB_CRT2_EN (1<<12) +#define SWF14_DS_PIPEB_LFP_EN (1<<11) +#define SWF14_DS_PIPEB_EFP_EN (1<<10) +#define SWF14_DS_PIPEB_TV_EN (1<<9) +#define SWF14_DS_PIPEB_CRT_EN (1<<8) +#define SWF14_DS_PIPEA_LFP2_EN (1<<7) +#define SWF14_DS_PIPEA_EFP2_EN (1<<6) +#define SWF14_DS_PIPEA_TV2_EN (1<<5) +#define SWF14_DS_PIPEA_CRT2_EN (1<<4) +#define SWF14_DS_PIPEA_LFP_EN (1<<3) +#define SWF14_DS_PIPEA_EFP_EN (1<<2) +#define SWF14_DS_PIPEA_TV_EN (1<<1) +#define SWF14_DS_PIPEA_CRT_EN (1<<0) + /* if GR18 indicates a panel fitting request */ +#define SWF14_PFIT_EN (1<<0) /* 0 means disable */ + /* if GR18 indicates an APM change request */ +#define SWF14_APM_HIBERNATE 0x4 +#define SWF14_APM_SUSPEND 0x3 +#define SWF14_APM_STANDBY 0x1 +#define SWF14_APM_RESTORE 0x0 + +#endif /* _I830_BIOS_H_ */ diff --git a/linux-core/intel_crt.c b/linux-core/intel_crt.c new file mode 100644 index 00000000..b9e8ee63 --- /dev/null +++ b/linux-core/intel_crt.c @@ -0,0 +1,296 @@ +/* + * Copyright © 2006-2007 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Authors: + * Eric Anholt <eric@anholt.net> + */ + +#include <linux/i2c.h> +#include "drmP.h" +#include "drm.h" +#include "drm_crtc.h" +#include "drm_crtc_helper.h" +#include "intel_drv.h" +#include "i915_drm.h" +#include "i915_drv.h" + +static void intel_crt_dpms(struct drm_encoder *encoder, int mode) +{ + struct drm_device *dev = encoder->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + u32 temp; + + temp = I915_READ(ADPA); + temp &= ~(ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE); + temp &= ~ADPA_DAC_ENABLE; + + switch(mode) { + case DPMSModeOn: + temp |= ADPA_DAC_ENABLE; + break; + case DPMSModeStandby: + temp |= ADPA_DAC_ENABLE | ADPA_HSYNC_CNTL_DISABLE; + break; + case DPMSModeSuspend: + temp |= ADPA_DAC_ENABLE | ADPA_VSYNC_CNTL_DISABLE; + break; + case DPMSModeOff: + temp |= ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE; + break; + } + + I915_WRITE(ADPA, temp); +} + +static void intel_crt_save(struct drm_connector *connector) +{ + +} + +static void intel_crt_restore(struct drm_connector *connector) +{ + +} + +static int intel_crt_mode_valid(struct drm_connector *connector, + struct drm_display_mode *mode) +{ + if (mode->flags & V_DBLSCAN) + return MODE_NO_DBLESCAN; + + if (mode->clock > 400000 || mode->clock < 25000) + return MODE_CLOCK_RANGE; + + return MODE_OK; +} + +static bool intel_crt_mode_fixup(struct drm_encoder *encoder, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + return true; +} + +static void intel_crt_mode_set(struct drm_encoder *encoder, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + + struct drm_device *dev = encoder->dev; + struct drm_crtc *crtc = encoder->crtc; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + struct drm_i915_private *dev_priv = dev->dev_private; + int dpll_md_reg; + u32 adpa, dpll_md; + + if (intel_crtc->pipe == 0) + dpll_md_reg = DPLL_A_MD; + else + dpll_md_reg = DPLL_B_MD; + + /* + * Disable separate mode multiplier used when cloning SDVO to CRT + * XXX this needs to be adjusted when we really are cloning + */ + if (IS_I965G(dev)) { + dpll_md = I915_READ(dpll_md_reg); + I915_WRITE(dpll_md_reg, + dpll_md & ~DPLL_MD_UDI_MULTIPLIER_MASK); + } + + adpa = 0; + if (adjusted_mode->flags & V_PHSYNC) + adpa |= ADPA_HSYNC_ACTIVE_HIGH; + if (adjusted_mode->flags & V_PVSYNC) + adpa |= ADPA_VSYNC_ACTIVE_HIGH; + + if (intel_crtc->pipe == 0) + adpa |= ADPA_PIPE_A_SELECT; + else + adpa |= ADPA_PIPE_B_SELECT; + + I915_WRITE(ADPA, adpa); +} + +/** + * Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect CRT presence. + * + * Not for i915G/i915GM + * + * \return TRUE if CRT is connected. + * \return FALSE if CRT is disconnected. + */ +static bool intel_crt_detect_hotplug(struct drm_connector *connector) +{ + struct drm_device *dev = connector->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + u32 temp; + + unsigned long timeout = jiffies + msecs_to_jiffies(1000); + + temp = I915_READ(PORT_HOTPLUG_EN); + + I915_WRITE(PORT_HOTPLUG_EN, + temp | CRT_HOTPLUG_FORCE_DETECT | (1 << 5)); + + do { + if (!(I915_READ(PORT_HOTPLUG_EN) & CRT_HOTPLUG_FORCE_DETECT)) + break; + msleep(1); + } while (time_after(timeout, jiffies)); + + if ((I915_READ(PORT_HOTPLUG_STAT) & CRT_HOTPLUG_MONITOR_MASK) == + CRT_HOTPLUG_MONITOR_COLOR) + return true; + + return false; +} + +static bool intel_crt_detect_ddc(struct drm_connector *connector) +{ + struct intel_output *intel_output = to_intel_output(connector); + + /* CRT should always be at 0, but check anyway */ + if (intel_output->type != INTEL_OUTPUT_ANALOG) + return false; + + return intel_ddc_probe(intel_output); +} + +static enum drm_connector_status intel_crt_detect(struct drm_connector *connector) +{ + struct drm_device *dev = connector->dev; + + if (IS_I9XX(dev) && !IS_I915G(dev) && !IS_I915GM(dev)) { + if (intel_crt_detect_hotplug(connector)) + return connector_status_connected; + else + return connector_status_disconnected; + } + + if (intel_crt_detect_ddc(connector)) + return connector_status_connected; + + /* TODO use load detect */ + return connector_status_unknown; +} + +static void intel_crt_destroy(struct drm_connector *connector) +{ + struct intel_output *intel_output = to_intel_output(connector); + + intel_i2c_destroy(intel_output->ddc_bus); + drm_sysfs_connector_remove(connector); + drm_connector_cleanup(connector); + kfree(connector); +} + +static int intel_crt_get_modes(struct drm_connector *connector) +{ + struct intel_output *intel_output = to_intel_output(connector); + return intel_ddc_get_modes(intel_output); +} + +static bool intel_crt_set_property(struct drm_connector *connector, + struct drm_property *property, + uint64_t value) +{ + struct drm_device *dev = connector->dev; + + if (property == dev->mode_config.dpms_property && connector->encoder) + intel_crt_dpms(connector->encoder, (uint32_t)(value & 0xf)); + + return true; +} + +/* + * Routines for controlling stuff on the analog port + */ + +static const struct drm_encoder_helper_funcs intel_crt_helper_funcs = { + .dpms = intel_crt_dpms, + .mode_fixup = intel_crt_mode_fixup, + .prepare = intel_encoder_prepare, + .commit = intel_encoder_commit, + .mode_set = intel_crt_mode_set, +}; + +static const struct drm_connector_funcs intel_crt_connector_funcs = { + .save = intel_crt_save, + .restore = intel_crt_restore, + .detect = intel_crt_detect, + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = intel_crt_destroy, + .set_property = intel_crt_set_property, +}; + +static const struct drm_connector_helper_funcs intel_crt_connector_helper_funcs = { + .mode_valid = intel_crt_mode_valid, + .get_modes = intel_crt_get_modes, + .best_encoder = intel_best_encoder, +}; + +void intel_crt_enc_destroy(struct drm_encoder *encoder) +{ + drm_encoder_cleanup(encoder); +} + +static const struct drm_encoder_funcs intel_crt_enc_funcs = { + .destroy = intel_crt_enc_destroy, +}; + +void intel_crt_init(struct drm_device *dev) +{ + struct drm_connector *connector; + struct intel_output *intel_output; + + intel_output = kzalloc(sizeof(struct intel_output), GFP_KERNEL); + if (!intel_output) + return; + + connector = &intel_output->base; + drm_connector_init(dev, &intel_output->base, + &intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA); + + drm_encoder_init(dev, &intel_output->enc, &intel_crt_enc_funcs, + DRM_MODE_ENCODER_DAC); + + drm_mode_connector_attach_encoder(&intel_output->base, + &intel_output->enc); + + /* Set up the DDC bus. */ + intel_output->ddc_bus = intel_i2c_create(dev, GPIOA, "CRTDDC_A"); + if (!intel_output->ddc_bus) { + dev_printk(KERN_ERR, &dev->pdev->dev, "DDC bus registration " + "failed.\n"); + return; + } + + intel_output->type = INTEL_OUTPUT_ANALOG; + connector->interlace_allowed = 0; + connector->doublescan_allowed = 0; + + drm_encoder_helper_add(&intel_output->enc, &intel_crt_helper_funcs); + drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs); + + drm_sysfs_connector_add(connector); +} diff --git a/linux-core/intel_display.c b/linux-core/intel_display.c new file mode 100644 index 00000000..0a2854a2 --- /dev/null +++ b/linux-core/intel_display.c @@ -0,0 +1,1613 @@ +/* + * Copyright © 2006-2007 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Authors: + * Eric Anholt <eric@anholt.net> + */ + +#include <linux/i2c.h> +#include "drmP.h" +#include "intel_drv.h" +#include "i915_drm.h" +#include "i915_drv.h" + +#include "drm_crtc_helper.h" + +bool intel_pipe_has_type (struct drm_crtc *crtc, int type); + +typedef struct { + /* given values */ + int n; + int m1, m2; + int p1, p2; + /* derived values */ + int dot; + int vco; + int m; + int p; +} intel_clock_t; + +typedef struct { + int min, max; +} intel_range_t; + +typedef struct { + int dot_limit; + int p2_slow, p2_fast; +} intel_p2_t; + +#define INTEL_P2_NUM 2 + +typedef struct { + intel_range_t dot, vco, n, m, m1, m2, p, p1; + intel_p2_t p2; +} intel_limit_t; + +#define I8XX_DOT_MIN 25000 +#define I8XX_DOT_MAX 350000 +#define I8XX_VCO_MIN 930000 +#define I8XX_VCO_MAX 1400000 +#define I8XX_N_MIN 3 +#define I8XX_N_MAX 16 +#define I8XX_M_MIN 96 +#define I8XX_M_MAX 140 +#define I8XX_M1_MIN 18 +#define I8XX_M1_MAX 26 +#define I8XX_M2_MIN 6 +#define I8XX_M2_MAX 16 +#define I8XX_P_MIN 4 +#define I8XX_P_MAX 128 +#define I8XX_P1_MIN 2 +#define I8XX_P1_MAX 33 +#define I8XX_P1_LVDS_MIN 1 +#define I8XX_P1_LVDS_MAX 6 +#define I8XX_P2_SLOW 4 +#define I8XX_P2_FAST 2 +#define I8XX_P2_LVDS_SLOW 14 +#define I8XX_P2_LVDS_FAST 14 /* No fast option */ +#define I8XX_P2_SLOW_LIMIT 165000 + +#define I9XX_DOT_MIN 20000 +#define I9XX_DOT_MAX 400000 +#define I9XX_VCO_MIN 1400000 +#define I9XX_VCO_MAX 2800000 +#define I9XX_N_MIN 3 +#define I9XX_N_MAX 8 +#define I9XX_M_MIN 70 +#define I9XX_M_MAX 120 +#define I9XX_M1_MIN 10 +#define I9XX_M1_MAX 20 +#define I9XX_M2_MIN 5 +#define I9XX_M2_MAX 9 +#define I9XX_P_SDVO_DAC_MIN 5 +#define I9XX_P_SDVO_DAC_MAX 80 +#define I9XX_P_LVDS_MIN 7 +#define I9XX_P_LVDS_MAX 98 +#define I9XX_P1_MIN 1 +#define I9XX_P1_MAX 8 +#define I9XX_P2_SDVO_DAC_SLOW 10 +#define I9XX_P2_SDVO_DAC_FAST 5 +#define I9XX_P2_SDVO_DAC_SLOW_LIMIT 200000 +#define I9XX_P2_LVDS_SLOW 14 +#define I9XX_P2_LVDS_FAST 7 +#define I9XX_P2_LVDS_SLOW_LIMIT 112000 + +#define INTEL_LIMIT_I8XX_DVO_DAC 0 +#define INTEL_LIMIT_I8XX_LVDS 1 +#define INTEL_LIMIT_I9XX_SDVO_DAC 2 +#define INTEL_LIMIT_I9XX_LVDS 3 + +static const intel_limit_t intel_limits[] = { + { /* INTEL_LIMIT_I8XX_DVO_DAC */ + .dot = { .min = I8XX_DOT_MIN, .max = I8XX_DOT_MAX }, + .vco = { .min = I8XX_VCO_MIN, .max = I8XX_VCO_MAX }, + .n = { .min = I8XX_N_MIN, .max = I8XX_N_MAX }, + .m = { .min = I8XX_M_MIN, .max = I8XX_M_MAX }, + .m1 = { .min = I8XX_M1_MIN, .max = I8XX_M1_MAX }, + .m2 = { .min = I8XX_M2_MIN, .max = I8XX_M2_MAX }, + .p = { .min = I8XX_P_MIN, .max = I8XX_P_MAX }, + .p1 = { .min = I8XX_P1_MIN, .max = I8XX_P1_MAX }, + .p2 = { .dot_limit = I8XX_P2_SLOW_LIMIT, + .p2_slow = I8XX_P2_SLOW, .p2_fast = I8XX_P2_FAST }, + }, + { /* INTEL_LIMIT_I8XX_LVDS */ + .dot = { .min = I8XX_DOT_MIN, .max = I8XX_DOT_MAX }, + .vco = { .min = I8XX_VCO_MIN, .max = I8XX_VCO_MAX }, + .n = { .min = I8XX_N_MIN, .max = I8XX_N_MAX }, + .m = { .min = I8XX_M_MIN, .max = I8XX_M_MAX }, + .m1 = { .min = I8XX_M1_MIN, .max = I8XX_M1_MAX }, + .m2 = { .min = I8XX_M2_MIN, .max = I8XX_M2_MAX }, + .p = { .min = I8XX_P_MIN, .max = I8XX_P_MAX }, + .p1 = { .min = I8XX_P1_LVDS_MIN, .max = I8XX_P1_LVDS_MAX }, + .p2 = { .dot_limit = I8XX_P2_SLOW_LIMIT, + .p2_slow = I8XX_P2_LVDS_SLOW, .p2_fast = I8XX_P2_LVDS_FAST }, + }, + { /* INTEL_LIMIT_I9XX_SDVO_DAC */ + .dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX }, + .vco = { .min = I9XX_VCO_MIN, .max = I9XX_VCO_MAX }, + .n = { .min = I9XX_N_MIN, .max = I9XX_N_MAX }, + .m = { .min = I9XX_M_MIN, .max = I9XX_M_MAX }, + .m1 = { .min = I9XX_M1_MIN, .max = I9XX_M1_MAX }, + .m2 = { .min = I9XX_M2_MIN, .max = I9XX_M2_MAX }, + .p = { .min = I9XX_P_SDVO_DAC_MIN, .max = I9XX_P_SDVO_DAC_MAX }, + .p1 = { .min = I9XX_P1_MIN, .max = I9XX_P1_MAX }, + .p2 = { .dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT, + .p2_slow = I9XX_P2_SDVO_DAC_SLOW, .p2_fast = I9XX_P2_SDVO_DAC_FAST }, + }, + { /* INTEL_LIMIT_I9XX_LVDS */ + .dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX }, + .vco = { .min = I9XX_VCO_MIN, .max = I9XX_VCO_MAX }, + .n = { .min = I9XX_N_MIN, .max = I9XX_N_MAX }, + .m = { .min = I9XX_M_MIN, .max = I9XX_M_MAX }, + .m1 = { .min = I9XX_M1_MIN, .max = I9XX_M1_MAX }, + .m2 = { .min = I9XX_M2_MIN, .max = I9XX_M2_MAX }, + .p = { .min = I9XX_P_LVDS_MIN, .max = I9XX_P_LVDS_MAX }, + .p1 = { .min = I9XX_P1_MIN, .max = I9XX_P1_MAX }, + /* The single-channel range is 25-112Mhz, and dual-channel + * is 80-224Mhz. Prefer single channel as much as possible. + */ + .p2 = { .dot_limit = I9XX_P2_LVDS_SLOW_LIMIT, + .p2_slow = I9XX_P2_LVDS_SLOW, .p2_fast = I9XX_P2_LVDS_FAST }, + }, +}; + +static const intel_limit_t *intel_limit(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + const intel_limit_t *limit; + + if (IS_I9XX(dev)) { + if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) + limit = &intel_limits[INTEL_LIMIT_I9XX_LVDS]; + else + limit = &intel_limits[INTEL_LIMIT_I9XX_SDVO_DAC]; + } else { + if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) + limit = &intel_limits[INTEL_LIMIT_I8XX_LVDS]; + else + limit = &intel_limits[INTEL_LIMIT_I8XX_DVO_DAC]; + } + return limit; +} + +/** Derive the pixel clock for the given refclk and divisors for 8xx chips. */ + +static void i8xx_clock(int refclk, intel_clock_t *clock) +{ + clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2); + clock->p = clock->p1 * clock->p2; + clock->vco = refclk * clock->m / (clock->n + 2); + clock->dot = clock->vco / clock->p; +} + +/** Derive the pixel clock for the given refclk and divisors for 9xx chips. */ + +static void i9xx_clock(int refclk, intel_clock_t *clock) +{ + clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2); + clock->p = clock->p1 * clock->p2; + clock->vco = refclk * clock->m / (clock->n + 2); + clock->dot = clock->vco / clock->p; +} + +static void intel_clock(struct drm_device *dev, int refclk, + intel_clock_t *clock) +{ + if (IS_I9XX(dev)) + return i9xx_clock (refclk, clock); + else + return i8xx_clock (refclk, clock); +} + +/** + * Returns whether any output on the specified pipe is of the specified type + */ +bool intel_pipe_has_type (struct drm_crtc *crtc, int type) +{ + struct drm_device *dev = crtc->dev; + struct drm_mode_config *mode_config = &dev->mode_config; + struct drm_connector *l_entry; + + list_for_each_entry(l_entry, &mode_config->connector_list, head) { + if (l_entry->encoder && + l_entry->encoder->crtc == crtc) { + struct intel_output *intel_output = to_intel_output(l_entry); + if (intel_output->type == type) + return true; + } + } + return false; +} + +#define INTELPllInvalid(s) { /* ErrorF (s) */; return false; } +/** + * Returns whether the given set of divisors are valid for a given refclk with + * the given connectors. + */ + +static bool intel_PLL_is_valid(struct drm_crtc *crtc, intel_clock_t *clock) +{ + const intel_limit_t *limit = intel_limit (crtc); + + if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1) + INTELPllInvalid ("p1 out of range\n"); + if (clock->p < limit->p.min || limit->p.max < clock->p) + INTELPllInvalid ("p out of range\n"); + if (clock->m2 < limit->m2.min || limit->m2.max < clock->m2) + INTELPllInvalid ("m2 out of range\n"); + if (clock->m1 < limit->m1.min || limit->m1.max < clock->m1) + INTELPllInvalid ("m1 out of range\n"); + if (clock->m1 <= clock->m2) + INTELPllInvalid ("m1 <= m2\n"); + if (clock->m < limit->m.min || limit->m.max < clock->m) + INTELPllInvalid ("m out of range\n"); + if (clock->n < limit->n.min || limit->n.max < clock->n) + INTELPllInvalid ("n out of range\n"); + if (clock->vco < limit->vco.min || limit->vco.max < clock->vco) + INTELPllInvalid ("vco out of range\n"); + /* XXX: We may need to be checking "Dot clock" depending on the multiplier, + * connector, etc., rather than just a single range. + */ + if (clock->dot < limit->dot.min || limit->dot.max < clock->dot) + INTELPllInvalid ("dot out of range\n"); + + return true; +} + +/** + * Returns a set of divisors for the desired target clock with the given + * refclk, or FALSE. The returned values represent the clock equation: + * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2. + */ +static bool intel_find_best_PLL(struct drm_crtc *crtc, int target, + int refclk, intel_clock_t *best_clock) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + intel_clock_t clock; + const intel_limit_t *limit = intel_limit(crtc); + int err = target; + + if (IS_I9XX(dev) && intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) && + (I915_READ(LVDS) & LVDS_PORT_EN) != 0) { + /* + * For LVDS, if the panel is on, just rely on its current + * settings for dual-channel. We haven't figured out how to + * reliably set up different single/dual channel state, if we + * even can. + */ + if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) == + LVDS_CLKB_POWER_UP) + clock.p2 = limit->p2.p2_fast; + else + clock.p2 = limit->p2.p2_slow; + } else { + if (target < limit->p2.dot_limit) + clock.p2 = limit->p2.p2_slow; + else + clock.p2 = limit->p2.p2_fast; + } + + memset (best_clock, 0, sizeof (*best_clock)); + + for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) { + for (clock.m2 = limit->m2.min; clock.m2 < clock.m1 && + clock.m2 <= limit->m2.max; clock.m2++) { + for (clock.n = limit->n.min; clock.n <= limit->n.max; + clock.n++) { + for (clock.p1 = limit->p1.min; + clock.p1 <= limit->p1.max; clock.p1++) { + int this_err; + + intel_clock(dev, refclk, &clock); + + if (!intel_PLL_is_valid(crtc, &clock)) + continue; + + this_err = abs(clock.dot - target); + if (this_err < err) { + *best_clock = clock; + err = this_err; + } + } + } + } + } + + return (err != target); +} + +void +intel_set_vblank(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_crtc *crtc; + struct intel_crtc *intel_crtc; + int vbl_pipe = 0; + + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { + intel_crtc = to_intel_crtc(crtc); + + if (crtc->enabled) + vbl_pipe |= (1<<intel_crtc->pipe); + } + + dev_priv->vblank_pipe = vbl_pipe; + i915_enable_interrupt(dev); +} +void +intel_wait_for_vblank(struct drm_device *dev) +{ + /* Wait for 20ms, i.e. one cycle at 50hz. */ + udelay(20000); +} + +void +intel_pipe_set_base(struct drm_crtc *crtc, int x, int y) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_i915_master_private *master_priv; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + struct intel_framebuffer *intel_fb; + int pipe = intel_crtc->pipe; + unsigned long Start, Offset; + int dspbase = (pipe == 0 ? DSPAADDR : DSPBADDR); + int dspsurf = (pipe == 0 ? DSPASURF : DSPBSURF); + int dspstride = (pipe == 0) ? DSPASTRIDE : DSPBSTRIDE; + int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR; + u32 dspcntr; + + /* no fb bound */ + if (!crtc->fb) { + DRM_DEBUG("No FB bound\n"); + return; + } + + intel_fb = to_intel_framebuffer(crtc->fb); + + Start = intel_fb->bo->offset; + Offset = y * crtc->fb->pitch + x * (crtc->fb->bits_per_pixel / 8); + + I915_WRITE(dspstride, crtc->fb->pitch); + + dspcntr = I915_READ(dspcntr_reg); + switch (crtc->fb->bits_per_pixel) { + case 8: + dspcntr |= DISPPLANE_8BPP; + break; + case 16: + if (crtc->fb->depth == 15) + dspcntr |= DISPPLANE_15_16BPP; + else + dspcntr |= DISPPLANE_16BPP; + break; + case 24: + case 32: + dspcntr |= DISPPLANE_32BPP_NO_ALPHA; + break; + default: + DRM_ERROR("Unknown color depth\n"); + return; + } + I915_WRITE(dspcntr_reg, dspcntr); + + DRM_DEBUG("Writing base %08lX %08lX %d %d\n", Start, Offset, x, y); + if (IS_I965G(dev)) { + I915_WRITE(dspbase, Offset); + I915_READ(dspbase); + I915_WRITE(dspsurf, Start); + I915_READ(dspsurf); + } else { + I915_WRITE(dspbase, Start + Offset); + I915_READ(dspbase); + } + + + if (!dev->primary->master) + return; + + master_priv = dev->primary->master->driver_priv; + if (!master_priv->sarea_priv) + return; + + switch (pipe) { + case 0: + master_priv->sarea_priv->planeA_x = x; + master_priv->sarea_priv->planeA_y = y; + break; + case 1: + master_priv->sarea_priv->planeB_x = x; + master_priv->sarea_priv->planeB_y = y; + break; + default: + DRM_ERROR("Can't update pipe %d in SAREA\n", pipe); + break; + } +} + + + +/** + * Sets the power management mode of the pipe and plane. + * + * This code should probably grow support for turning the cursor off and back + * on appropriately at the same time as we're turning the pipe off/on. + */ +static void intel_crtc_dpms(struct drm_crtc *crtc, int mode) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_master_private *master_priv; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + int pipe = intel_crtc->pipe; + int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B; + int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR; + int dspbase_reg = (pipe == 0) ? DSPAADDR : DSPBADDR; + int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF; + u32 temp; + bool enabled; + + /* XXX: When our outputs are all unaware of DPMS modes other than off + * and on, we should map those modes to DPMSModeOff in the CRTC. + */ + switch (mode) { + case DPMSModeOn: + case DPMSModeStandby: + case DPMSModeSuspend: + /* Enable the DPLL */ + temp = I915_READ(dpll_reg); + if ((temp & DPLL_VCO_ENABLE) == 0) { + I915_WRITE(dpll_reg, temp); + I915_READ(dpll_reg); + /* Wait for the clocks to stabilize. */ + udelay(150); + I915_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE); + I915_READ(dpll_reg); + /* Wait for the clocks to stabilize. */ + udelay(150); + I915_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE); + I915_READ(dpll_reg); + /* Wait for the clocks to stabilize. */ + udelay(150); + } + + /* Enable the pipe */ + temp = I915_READ(pipeconf_reg); + if ((temp & PIPEACONF_ENABLE) == 0) + I915_WRITE(pipeconf_reg, temp | PIPEACONF_ENABLE); + + /* Enable the plane */ + temp = I915_READ(dspcntr_reg); + if ((temp & DISPLAY_PLANE_ENABLE) == 0) { + I915_WRITE(dspcntr_reg, temp | DISPLAY_PLANE_ENABLE); + /* Flush the plane changes */ + I915_WRITE(dspbase_reg, I915_READ(dspbase_reg)); + } + + intel_crtc_load_lut(crtc); + + /* Give the overlay scaler a chance to enable if it's on this pipe */ + //intel_crtc_dpms_video(crtc, TRUE); TODO + break; + case DPMSModeOff: + /* Give the overlay scaler a chance to disable if it's on this pipe */ + //intel_crtc_dpms_video(crtc, FALSE); TODO + + /* Disable the VGA plane that we never use */ + I915_WRITE(VGACNTRL, VGA_DISP_DISABLE); + + /* Disable display plane */ + temp = I915_READ(dspcntr_reg); + if ((temp & DISPLAY_PLANE_ENABLE) != 0) { + I915_WRITE(dspcntr_reg, temp & ~DISPLAY_PLANE_ENABLE); + /* Flush the plane changes */ + I915_WRITE(dspbase_reg, I915_READ(dspbase_reg)); + I915_READ(dspbase_reg); + } + + if (!IS_I9XX(dev)) { + /* Wait for vblank for the disable to take effect */ + intel_wait_for_vblank(dev); + } + + /* Next, disable display pipes */ + temp = I915_READ(pipeconf_reg); + if ((temp & PIPEACONF_ENABLE) != 0) { + I915_WRITE(pipeconf_reg, temp & ~PIPEACONF_ENABLE); + I915_READ(pipeconf_reg); + } + + /* Wait for vblank for the disable to take effect. */ + intel_wait_for_vblank(dev); + + temp = I915_READ(dpll_reg); + if ((temp & DPLL_VCO_ENABLE) != 0) { + I915_WRITE(dpll_reg, temp & ~DPLL_VCO_ENABLE); + I915_READ(dpll_reg); + } + + /* Wait for the clocks to turn off. */ + udelay(150); + break; + } + + if (!dev->primary->master) + return; + + master_priv = dev->primary->master->driver_priv; + if (!master_priv->sarea_priv) + return; + + enabled = crtc->enabled && mode != DPMSModeOff; + + switch (pipe) { + case 0: + master_priv->sarea_priv->planeA_w = enabled ? crtc->mode.hdisplay : 0; + master_priv->sarea_priv->planeA_h = enabled ? crtc->mode.vdisplay : 0; + break; + case 1: + master_priv->sarea_priv->planeB_w = enabled ? crtc->mode.hdisplay : 0; + master_priv->sarea_priv->planeB_h = enabled ? crtc->mode.vdisplay : 0; + break; + default: + DRM_ERROR("Can't update pipe %d in SAREA\n", pipe); + break; + } + + intel_crtc->dpms_mode = mode; +} + +static void intel_crtc_prepare (struct drm_crtc *crtc) +{ + struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; + crtc_funcs->dpms(crtc, DPMSModeOff); +} + +static void intel_crtc_commit (struct drm_crtc *crtc) +{ + struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; + crtc_funcs->dpms(crtc, DPMSModeOn); +} + +void intel_encoder_prepare (struct drm_encoder *encoder) +{ + struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private; + /* lvds has its own version of prepare see intel_lvds_prepare */ + encoder_funcs->dpms(encoder, DPMSModeOff); +} + +void intel_encoder_commit (struct drm_encoder *encoder) +{ + struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private; + /* lvds has its own version of commit see intel_lvds_commit */ + encoder_funcs->dpms(encoder, DPMSModeOn); +} + +static bool intel_crtc_mode_fixup(struct drm_crtc *crtc, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + return true; +} + + +/** Returns the core display clock speed for i830 - i945 */ +static int intel_get_core_clock_speed(struct drm_device *dev) +{ + + /* Core clock values taken from the published datasheets. + * The 830 may go up to 166 Mhz, which we should check. + */ + if (IS_I945G(dev)) + return 400000; + else if (IS_I915G(dev)) + return 333000; + else if (IS_I945GM(dev) || IS_845G(dev)) + return 200000; + else if (IS_I915GM(dev)) { + u16 gcfgc = 0; + + pci_read_config_word(dev->pdev, GCFGC, &gcfgc); + + if (gcfgc & GC_LOW_FREQUENCY_ENABLE) + return 133000; + else { + switch (gcfgc & GC_DISPLAY_CLOCK_MASK) { + case GC_DISPLAY_CLOCK_333_MHZ: + return 333000; + default: + case GC_DISPLAY_CLOCK_190_200_MHZ: + return 190000; + } + } + } else if (IS_I865G(dev)) + return 266000; + else if (IS_I855(dev)) { +#if 0 + PCITAG bridge = pciTag(0, 0, 0); /* This is always the host bridge */ + u16 hpllcc = pciReadWord(bridge, HPLLCC); + +#endif + u16 hpllcc = 0; + /* Assume that the hardware is in the high speed state. This + * should be the default. + */ + switch (hpllcc & GC_CLOCK_CONTROL_MASK) { + case GC_CLOCK_133_200: + case GC_CLOCK_100_200: + return 200000; + case GC_CLOCK_166_250: + return 250000; + case GC_CLOCK_100_133: + return 133000; + } + } else /* 852, 830 */ + return 133000; + + return 0; /* Silence gcc warning */ +} + + +/** + * Return the pipe currently connected to the panel fitter, + * or -1 if the panel fitter is not present or not in use + */ +static int intel_panel_fitter_pipe (struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + u32 pfit_control; + + /* i830 doesn't have a panel fitter */ + if (IS_I830(dev)) + return -1; + + pfit_control = I915_READ(PFIT_CONTROL); + + /* See if the panel fitter is in use */ + if ((pfit_control & PFIT_ENABLE) == 0) + return -1; + + /* 965 can place panel fitter on either pipe */ + if (IS_I965G(dev)) + return (pfit_control >> 29) & 0x3; + + /* older chips can only use pipe 1 */ + return 1; +} + +static void intel_crtc_mode_set(struct drm_crtc *crtc, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode, + int x, int y) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + int pipe = intel_crtc->pipe; + int fp_reg = (pipe == 0) ? FPA0 : FPB0; + int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B; + int dpll_md_reg = (intel_crtc->pipe == 0) ? DPLL_A_MD : DPLL_B_MD; + int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR; + int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF; + int htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B; + int hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B; + int hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B; + int vtot_reg = (pipe == 0) ? VTOTAL_A : VTOTAL_B; + int vblank_reg = (pipe == 0) ? VBLANK_A : VBLANK_B; + int vsync_reg = (pipe == 0) ? VSYNC_A : VSYNC_B; + int dspsize_reg = (pipe == 0) ? DSPASIZE : DSPBSIZE; + int dsppos_reg = (pipe == 0) ? DSPAPOS : DSPBPOS; + int pipesrc_reg = (pipe == 0) ? PIPEASRC : PIPEBSRC; + int refclk; + intel_clock_t clock; + u32 dpll = 0, fp = 0, dspcntr, pipeconf; + bool ok, is_sdvo = false, is_dvo = false; + bool is_crt = false, is_lvds = false, is_tv = false; + struct drm_mode_config *mode_config = &dev->mode_config; + struct drm_connector *connector; + + list_for_each_entry(connector, &mode_config->connector_list, head) { + struct intel_output *intel_output = to_intel_output(connector); + + if (!connector->encoder || connector->encoder->crtc != crtc) + continue; + + switch (intel_output->type) { + case INTEL_OUTPUT_LVDS: + is_lvds = TRUE; + break; + case INTEL_OUTPUT_SDVO: + is_sdvo = TRUE; + break; + case INTEL_OUTPUT_DVO: + is_dvo = TRUE; + break; + case INTEL_OUTPUT_TVOUT: + is_tv = TRUE; + break; + case INTEL_OUTPUT_ANALOG: + is_crt = TRUE; + break; + } + } + + if (IS_I9XX(dev)) { + refclk = 96000; + } else { + refclk = 48000; + } + + ok = intel_find_best_PLL(crtc, adjusted_mode->clock, refclk, &clock); + if (!ok) { + DRM_ERROR("Couldn't find PLL settings for mode!\n"); + return; + } + + fp = clock.n << 16 | clock.m1 << 8 | clock.m2; + + dpll = DPLL_VGA_MODE_DIS; + if (IS_I9XX(dev)) { + if (is_lvds) + dpll |= DPLLB_MODE_LVDS; + else + dpll |= DPLLB_MODE_DAC_SERIAL; + if (is_sdvo) { + dpll |= DPLL_DVO_HIGH_SPEED; + if (IS_I945G(dev) || IS_I945GM(dev)) { + int sdvo_pixel_multiply = adjusted_mode->clock / mode->clock; + dpll |= (sdvo_pixel_multiply - 1) << SDVO_MULTIPLIER_SHIFT_HIRES; + } + } + + /* compute bitmask from p1 value */ + dpll |= (1 << (clock.p1 - 1)) << 16; + switch (clock.p2) { + case 5: + dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5; + break; + case 7: + dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7; + break; + case 10: + dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10; + break; + case 14: + dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14; + break; + } + if (IS_I965G(dev)) + dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT); + } else { + if (is_lvds) { + dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT; + } else { + if (clock.p1 == 2) + dpll |= PLL_P1_DIVIDE_BY_TWO; + else + dpll |= (clock.p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT; + if (clock.p2 == 4) + dpll |= PLL_P2_DIVIDE_BY_4; + } + } + + if (is_tv) { + /* XXX: just matching BIOS for now */ +/* dpll |= PLL_REF_INPUT_TVCLKINBC; */ + dpll |= 3; + } +#if 0 + else if (is_lvds) + dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN; +#endif + else + dpll |= PLL_REF_INPUT_DREFCLK; + + /* setup pipeconf */ + pipeconf = I915_READ(pipeconf_reg); + + /* Set up the display plane register */ + dspcntr = DISPPLANE_GAMMA_ENABLE; + + if (pipe == 0) + dspcntr |= DISPPLANE_SEL_PIPE_A; + else + dspcntr |= DISPPLANE_SEL_PIPE_B; + + if (pipe == 0 && !IS_I965G(dev)) { + /* Enable pixel doubling when the dot clock is > 90% of the (display) + * core speed. + * + * XXX: No double-wide on 915GM pipe B. Is that the only reason for the + * pipe == 0 check? + */ + if (mode->clock > intel_get_core_clock_speed(dev) * 9 / 10) + pipeconf |= PIPEACONF_DOUBLE_WIDE; + else + pipeconf &= ~PIPEACONF_DOUBLE_WIDE; + } + + dspcntr |= DISPLAY_PLANE_ENABLE; + pipeconf |= PIPEACONF_ENABLE; + dpll |= DPLL_VCO_ENABLE; + + + /* Disable the panel fitter if it was on our pipe */ + if (intel_panel_fitter_pipe(dev) == pipe) + I915_WRITE(PFIT_CONTROL, 0); + + DRM_DEBUG("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B'); + drm_mode_debug_printmodeline(mode); + +#if 0 + if (!xf86ModesEqual(mode, adjusted_mode)) { + xf86DrvMsg(pScrn->scrnIndex, X_INFO, + "Adjusted mode for pipe %c:\n", pipe == 0 ? 'A' : 'B'); + xf86PrintModeline(pScrn->scrnIndex, mode); + } + i830PrintPll("chosen", &clock); +#endif + + if (dpll & DPLL_VCO_ENABLE) { + I915_WRITE(fp_reg, fp); + I915_WRITE(dpll_reg, dpll & ~DPLL_VCO_ENABLE); + I915_READ(dpll_reg); + udelay(150); + } + + /* The LVDS pin pair needs to be on before the DPLLs are enabled. + * This is an exception to the general rule that mode_set doesn't turn + * things on. + */ + if (is_lvds) { + u32 lvds = I915_READ(LVDS); + + lvds |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP | LVDS_PIPEB_SELECT; + /* Set the B0-B3 data pairs corresponding to whether we're going to + * set the DPLLs for dual-channel mode or not. + */ + if (clock.p2 == 7) + lvds |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP; + else + lvds &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP); + + /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP) + * appropriately here, but we need to look more thoroughly into how + * panels behave in the two modes. + */ + + I915_WRITE(LVDS, lvds); + I915_READ(LVDS); + } + + I915_WRITE(fp_reg, fp); + I915_WRITE(dpll_reg, dpll); + I915_READ(dpll_reg); + /* Wait for the clocks to stabilize. */ + udelay(150); + + if (IS_I965G(dev)) { + int sdvo_pixel_multiply = adjusted_mode->clock / mode->clock; + I915_WRITE(dpll_md_reg, (0 << DPLL_MD_UDI_DIVIDER_SHIFT) | + ((sdvo_pixel_multiply - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT)); + } else { + /* write it again -- the BIOS does, after all */ + I915_WRITE(dpll_reg, dpll); + } + I915_READ(dpll_reg); + /* Wait for the clocks to stabilize. */ + udelay(150); + + I915_WRITE(htot_reg, (adjusted_mode->crtc_hdisplay - 1) | + ((adjusted_mode->crtc_htotal - 1) << 16)); + I915_WRITE(hblank_reg, (adjusted_mode->crtc_hblank_start - 1) | + ((adjusted_mode->crtc_hblank_end - 1) << 16)); + I915_WRITE(hsync_reg, (adjusted_mode->crtc_hsync_start - 1) | + ((adjusted_mode->crtc_hsync_end - 1) << 16)); + I915_WRITE(vtot_reg, (adjusted_mode->crtc_vdisplay - 1) | + ((adjusted_mode->crtc_vtotal - 1) << 16)); + I915_WRITE(vblank_reg, (adjusted_mode->crtc_vblank_start - 1) | + ((adjusted_mode->crtc_vblank_end - 1) << 16)); + I915_WRITE(vsync_reg, (adjusted_mode->crtc_vsync_start - 1) | + ((adjusted_mode->crtc_vsync_end - 1) << 16)); + /* pipesrc and dspsize control the size that is scaled from, which should + * always be the user's requested size. + */ + I915_WRITE(dspsize_reg, ((mode->vdisplay - 1) << 16) | (mode->hdisplay - 1)); + I915_WRITE(dsppos_reg, 0); + I915_WRITE(pipesrc_reg, ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1)); + I915_WRITE(pipeconf_reg, pipeconf); + I915_READ(pipeconf_reg); + + intel_wait_for_vblank(dev); + + I915_WRITE(dspcntr_reg, dspcntr); + + /* Flush the plane changes */ + intel_pipe_set_base(crtc, x, y); + + intel_set_vblank(dev); + + intel_wait_for_vblank(dev); +} + +/** Loads the palette/gamma unit for the CRTC with the prepared values */ +void intel_crtc_load_lut(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + int palreg = (intel_crtc->pipe == 0) ? PALETTE_A : PALETTE_B; + int i; + + /* The clocks have to be on to load the palette. */ + if (!crtc->enabled) + return; + + for (i = 0; i < 256; i++) { + I915_WRITE(palreg + 4 * i, + (intel_crtc->lut_r[i] << 16) | + (intel_crtc->lut_g[i] << 8) | + intel_crtc->lut_b[i]); + } +} + +static int intel_crtc_cursor_set(struct drm_crtc *crtc, + uint32_t handle, + uint32_t width, uint32_t height) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + struct drm_buffer_object *bo; + int pipe = intel_crtc->pipe; + uint32_t control = (pipe == 0) ? CURACNTR : CURBCNTR; + uint32_t base = (pipe == 0) ? CURABASE : CURBBASE; + uint32_t temp; + int ret; + size_t addr; + + DRM_DEBUG("\n"); + + /* if we want to turn of the cursor ignore width and height */ + if (!handle) { + DRM_DEBUG("cursor off\n"); + /* turn of the cursor */ + temp = 0; + temp |= CURSOR_MODE_DISABLE; + + I915_WRITE(control, temp); + I915_WRITE(base, 0); + return 0; + } + + /* Currently we only support 64x64 cursors */ + if (width != 64 || height != 64) { + DRM_ERROR("we currently only support 64x64 cursors\n"); + return -EINVAL; + } + + ret = drm_get_buffer_object(dev, &bo, handle); + if (ret) { + return -EINVAL; + } + + if ((bo->mem.flags & DRM_BO_MASK_MEM) != DRM_BO_FLAG_MEM_VRAM) { + DRM_ERROR("buffer needs to be in VRAM\n"); + return -ENOMEM; + } + + if (bo->mem.size < width * height * 4) { + DRM_ERROR("buffer is to small\n"); + return -ENOMEM; + } + + if (dev_priv->cursor_needs_physical) + addr = dev_priv->stolen_base + bo->offset; + else + addr = bo->offset; + + intel_crtc->cursor_addr = addr; + temp = 0; + /* set the pipe for the cursor */ + temp |= (pipe << 28); + temp |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE; + + I915_WRITE(control, temp); + I915_WRITE(base, addr); + + return 0; +} + +static int intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + int pipe = intel_crtc->pipe; + uint32_t temp = 0; + uint32_t adder; + + if (x < 0) { + temp |= (CURSOR_POS_SIGN << CURSOR_X_SHIFT); + x = -x; + } + if (y < 0) { + temp |= (CURSOR_POS_SIGN << CURSOR_Y_SHIFT); + y = -y; + } + + temp |= ((x & CURSOR_POS_MASK) << CURSOR_X_SHIFT); + temp |= ((y & CURSOR_POS_MASK) << CURSOR_Y_SHIFT); + + adder = intel_crtc->cursor_addr; + I915_WRITE((pipe == 0) ? CURAPOS : CURBPOS, temp); + I915_WRITE((pipe == 0) ? CURABASE : CURBBASE, adder); + + return 0; +} + +/** Sets the color ramps on behalf of RandR */ +void intel_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green, + u16 blue, int regno) +{ + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + + intel_crtc->lut_r[regno] = red >> 8; + intel_crtc->lut_g[regno] = green >> 8; + intel_crtc->lut_b[regno] = blue >> 8; +} + +static void intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green, + u16 *blue, uint32_t size) +{ + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + int i; + + if (size != 256) + return; + + for (i = 0; i < 256; i++) { + intel_crtc->lut_r[i] = red[i] >> 8; + intel_crtc->lut_g[i] = green[i] >> 8; + intel_crtc->lut_b[i] = blue[i] >> 8; + } + + intel_crtc_load_lut(crtc); +} + +/** + * Get a pipe with a simple mode set on it for doing load-based monitor + * detection. + * + * It will be up to the load-detect code to adjust the pipe as appropriate for + * its requirements. The pipe will be connected to no other outputs. + * + * Currently this code will only succeed if there is a pipe with no outputs + * configured for it. In the future, it could choose to temporarily disable + * some outputs to free up a pipe for its use. + * + * \return crtc, or NULL if no pipes are available. + */ + +/* VESA 640x480x72Hz mode to set on the pipe */ +static struct drm_display_mode load_detect_mode = { + DRM_MODE("640x480", DRM_MODE_TYPE_DEFAULT, 31500, 640, 664, + 704, 832, 0, 480, 489, 491, 520, 0, V_NHSYNC | V_NVSYNC), +}; + +struct drm_crtc *intel_get_load_detect_pipe(struct intel_output *intel_output, + struct drm_display_mode *mode, + int *dpms_mode) +{ + struct intel_crtc *intel_crtc; + struct drm_crtc *possible_crtc; + struct drm_crtc *supported_crtc =NULL; + struct drm_encoder *encoder = &intel_output->enc; + struct drm_crtc *crtc = NULL; + struct drm_device *dev = encoder->dev; + struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private; + struct drm_crtc_helper_funcs *crtc_funcs; + int i = -1; + + /* + * Algorithm gets a little messy: + * - if the connector already has an assigned crtc, use it (but make + * sure it's on first) + * - try to find the first unused crtc that can drive this connector, + * and use that if we find one + * - if there are no unused crtcs available, try to use the first + * one we found that supports the connector + */ + + /* See if we already have a CRTC for this connector */ + if (encoder->crtc) { + crtc = encoder->crtc; + /* Make sure the crtc and connector are running */ + intel_crtc = to_intel_crtc(crtc); + *dpms_mode = intel_crtc->dpms_mode; + if (intel_crtc->dpms_mode != DPMSModeOn) { + crtc_funcs = crtc->helper_private; + crtc_funcs->dpms(crtc, DPMSModeOn); + encoder_funcs->dpms(encoder, DPMSModeOn); + } + return crtc; + } + + /* Find an unused one (if possible) */ + list_for_each_entry(possible_crtc, &dev->mode_config.crtc_list, head) { + i++; + if (!(encoder->possible_crtcs & (1 << i))) + continue; + if (!possible_crtc->enabled) { + crtc = possible_crtc; + break; + } + if (!supported_crtc) + supported_crtc = possible_crtc; + } + + /* + * If we didn't find an unused CRTC, don't use any. + */ + if (!crtc) { + return NULL; + } + + encoder->crtc = crtc; + intel_output->load_detect_temp = TRUE; + + intel_crtc = to_intel_crtc(crtc); + *dpms_mode = intel_crtc->dpms_mode; + + if (!crtc->enabled) { + if (!mode) + mode = &load_detect_mode; + drm_crtc_helper_set_mode(crtc, mode, 0, 0); + } else { + if (intel_crtc->dpms_mode != DPMSModeOn) { + crtc_funcs = crtc->helper_private; + crtc_funcs->dpms(crtc, DPMSModeOn); + } + + /* Add this connector to the crtc */ + encoder_funcs->mode_set(encoder, &crtc->mode, &crtc->mode); + encoder_funcs->commit(encoder); + } + /* let the connector get through one full cycle before testing */ + intel_wait_for_vblank(dev); + + return crtc; +} + +void intel_release_load_detect_pipe(struct intel_output *intel_output, int dpms_mode) +{ + struct drm_encoder *encoder = &intel_output->enc; + struct drm_device *dev = encoder->dev; + struct drm_crtc *crtc = encoder->crtc; + struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private; + struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; + + if (intel_output->load_detect_temp) { + encoder->crtc = NULL; + intel_output->load_detect_temp = FALSE; + crtc->enabled = drm_helper_crtc_in_use(crtc); + drm_helper_disable_unused_functions(dev); + } + + /* Switch crtc and output back off if necessary */ + if (crtc->enabled && dpms_mode != DPMSModeOn) { + if (encoder->crtc == crtc) + encoder_funcs->dpms(encoder, dpms_mode); + crtc_funcs->dpms(crtc, dpms_mode); + } +} + +/* Returns the clock of the currently programmed mode of the given pipe. */ +static int intel_crtc_clock_get(struct drm_device *dev, struct drm_crtc *crtc) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + int pipe = intel_crtc->pipe; + u32 dpll = I915_READ((pipe == 0) ? DPLL_A : DPLL_B); + u32 fp; + intel_clock_t clock; + + if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0) + fp = I915_READ((pipe == 0) ? FPA0 : FPB0); + else + fp = I915_READ((pipe == 0) ? FPA1 : FPB1); + + clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT; + clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT; + clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT; + if (IS_I9XX(dev)) { + clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK) >> + DPLL_FPA01_P1_POST_DIV_SHIFT); + + switch (dpll & DPLL_MODE_MASK) { + case DPLLB_MODE_DAC_SERIAL: + clock.p2 = dpll & DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 ? + 5 : 10; + break; + case DPLLB_MODE_LVDS: + clock.p2 = dpll & DPLLB_LVDS_P2_CLOCK_DIV_7 ? + 7 : 14; + break; + default: + DRM_DEBUG("Unknown DPLL mode %08x in programmed " + "mode\n", (int)(dpll & DPLL_MODE_MASK)); + return 0; + } + + /* XXX: Handle the 100Mhz refclk */ + i9xx_clock(96000, &clock); + } else { + bool is_lvds = (pipe == 1) && (I915_READ(LVDS) & LVDS_PORT_EN); + + if (is_lvds) { + clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >> + DPLL_FPA01_P1_POST_DIV_SHIFT); + clock.p2 = 14; + + if ((dpll & PLL_REF_INPUT_MASK) == + PLLB_REF_INPUT_SPREADSPECTRUMIN) { + /* XXX: might not be 66MHz */ + i8xx_clock(66000, &clock); + } else + i8xx_clock(48000, &clock); + } else { + if (dpll & PLL_P1_DIVIDE_BY_TWO) + clock.p1 = 2; + else { + clock.p1 = ((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830) >> + DPLL_FPA01_P1_POST_DIV_SHIFT) + 2; + } + if (dpll & PLL_P2_DIVIDE_BY_4) + clock.p2 = 4; + else + clock.p2 = 2; + + i8xx_clock(48000, &clock); + } + } + + /* XXX: It would be nice to validate the clocks, but we can't reuse + * i830PllIsValid() because it relies on the xf86_config connector + * configuration being accurate, which it isn't necessarily. + */ + + return clock.dot; +} + +/** Returns the currently programmed mode of the given pipe. */ +struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev, + struct drm_crtc *crtc) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + int pipe = intel_crtc->pipe; + struct drm_display_mode *mode; + int htot = I915_READ((pipe == 0) ? HTOTAL_A : HTOTAL_B); + int hsync = I915_READ((pipe == 0) ? HSYNC_A : HSYNC_B); + int vtot = I915_READ((pipe == 0) ? VTOTAL_A : VTOTAL_B); + int vsync = I915_READ((pipe == 0) ? VSYNC_A : VSYNC_B); + + mode = kzalloc(sizeof(*mode), GFP_KERNEL); + if (!mode) + return NULL; + + mode->clock = intel_crtc_clock_get(dev, crtc); + mode->hdisplay = (htot & 0xffff) + 1; + mode->htotal = ((htot & 0xffff0000) >> 16) + 1; + mode->hsync_start = (hsync & 0xffff) + 1; + mode->hsync_end = ((hsync & 0xffff0000) >> 16) + 1; + mode->vdisplay = (vtot & 0xffff) + 1; + mode->vtotal = ((vtot & 0xffff0000) >> 16) + 1; + mode->vsync_start = (vsync & 0xffff) + 1; + mode->vsync_end = ((vsync & 0xffff0000) >> 16) + 1; + + drm_mode_set_name(mode); + drm_mode_set_crtcinfo(mode, 0); + + return mode; +} + +static void intel_crtc_destroy(struct drm_crtc *crtc) +{ + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + + drm_crtc_cleanup(crtc); + kfree(intel_crtc); +} + +static const struct drm_crtc_helper_funcs intel_helper_funcs = { + .dpms = intel_crtc_dpms, + .mode_fixup = intel_crtc_mode_fixup, + .mode_set = intel_crtc_mode_set, + .mode_set_base = intel_pipe_set_base, + .prepare = intel_crtc_prepare, + .commit = intel_crtc_commit, +}; + +static const struct drm_crtc_funcs intel_crtc_funcs = { + .cursor_set = intel_crtc_cursor_set, + .cursor_move = intel_crtc_cursor_move, + .gamma_set = intel_crtc_gamma_set, + .set_config = drm_crtc_helper_set_config, + .destroy = intel_crtc_destroy, +}; + + +void intel_crtc_init(struct drm_device *dev, int pipe) +{ + struct intel_crtc *intel_crtc; + int i; + + intel_crtc = kzalloc(sizeof(struct intel_crtc) + (INTELFB_CONN_LIMIT * sizeof(struct drm_connector *)), GFP_KERNEL); + if (intel_crtc == NULL) + return; + + drm_crtc_init(dev, &intel_crtc->base, &intel_crtc_funcs); + + drm_mode_crtc_set_gamma_size(&intel_crtc->base, 256); + intel_crtc->pipe = pipe; + for (i = 0; i < 256; i++) { + intel_crtc->lut_r[i] = i; + intel_crtc->lut_g[i] = i; + intel_crtc->lut_b[i] = i; + } + + intel_crtc->cursor_addr = 0; + intel_crtc->dpms_mode = DPMSModeOff; + drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs); + + intel_crtc->mode_set.crtc = &intel_crtc->base; + intel_crtc->mode_set.connectors = (struct drm_connector **)(intel_crtc + 1); + intel_crtc->mode_set.num_connectors = 0; + + if (i915_fbpercrtc) { + + + + } +} + +struct drm_crtc *intel_get_crtc_from_pipe(struct drm_device *dev, int pipe) +{ + struct drm_crtc *crtc = NULL; + + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + if (intel_crtc->pipe == pipe) + break; + } + return crtc; +} + +int intel_connector_clones(struct drm_device *dev, int type_mask) +{ + int index_mask = 0; + struct drm_connector *connector; + int entry = 0; + + list_for_each_entry(connector, &dev->mode_config.connector_list, head) { + struct intel_output *intel_output = to_intel_output(connector); + if (type_mask & (1 << intel_output->type)) + index_mask |= (1 << entry); + entry++; + } + return index_mask; +} + + +static void intel_setup_outputs(struct drm_device *dev) +{ + struct drm_connector *connector; + + intel_crt_init(dev); + + /* Set up integrated LVDS */ + if (IS_MOBILE(dev) && !IS_I830(dev)) + intel_lvds_init(dev); + + if (IS_I9XX(dev)) { + intel_sdvo_init(dev, SDVOB); + intel_sdvo_init(dev, SDVOC); + } else + intel_dvo_init(dev); + + if (IS_I9XX(dev) && !IS_I915G(dev)) + intel_tv_init(dev); + + list_for_each_entry(connector, &dev->mode_config.connector_list, head) { + struct intel_output *intel_output = to_intel_output(connector); + struct drm_encoder *encoder = &intel_output->enc; + int crtc_mask = 0, clone_mask = 0; + + /* valid crtcs */ + switch(intel_output->type) { + case INTEL_OUTPUT_DVO: + case INTEL_OUTPUT_SDVO: + crtc_mask = ((1 << 0)| + (1 << 1)); + clone_mask = ((1 << INTEL_OUTPUT_ANALOG) | + (1 << INTEL_OUTPUT_DVO) | + (1 << INTEL_OUTPUT_SDVO)); + break; + case INTEL_OUTPUT_ANALOG: + crtc_mask = ((1 << 0)| + (1 << 1)); + clone_mask = ((1 << INTEL_OUTPUT_ANALOG) | + (1 << INTEL_OUTPUT_DVO) | + (1 << INTEL_OUTPUT_SDVO)); + break; + case INTEL_OUTPUT_LVDS: + crtc_mask = (1 << 1); + clone_mask = (1 << INTEL_OUTPUT_LVDS); + break; + case INTEL_OUTPUT_TVOUT: + crtc_mask = ((1 << 0) | + (1 << 1)); + clone_mask = (1 << INTEL_OUTPUT_TVOUT); + break; + } + encoder->possible_crtcs = crtc_mask; + encoder->possible_clones = intel_connector_clones(dev, clone_mask); + } +} + +static void intel_user_framebuffer_destroy(struct drm_framebuffer *fb) +{ + struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb); + struct drm_device *dev = fb->dev; + if (fb->fbdev) + intelfb_remove(dev, fb); + + drm_framebuffer_cleanup(fb); + + kfree(intel_fb); +} + +static const struct drm_framebuffer_funcs intel_fb_funcs = { + .destroy = intel_user_framebuffer_destroy, +}; + +struct drm_framebuffer *intel_user_framebuffer_create(struct drm_device *dev, + struct drm_file *file_priv, + struct drm_mode_fb_cmd *mode_cmd) +{ + struct intel_framebuffer *intel_fb; + + intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL); + if (!intel_fb) + return NULL; + + drm_framebuffer_init(dev, &intel_fb->base, &intel_fb_funcs); + drm_helper_mode_fill_fb_struct(&intel_fb->base, mode_cmd); + + if (file_priv) { + mutex_lock(&dev->struct_mutex); + intel_fb->bo = drm_lookup_buffer_object(file_priv, intel_fb->base.mm_handle, 0); + mutex_unlock(&dev->struct_mutex); + if (!intel_fb->bo) { + kfree(intel_fb); + return NULL; + } + } + return &intel_fb->base; +} + +static int intel_insert_new_fb(struct drm_device *dev, struct drm_file *file_priv, + struct drm_framebuffer *fb, struct drm_mode_fb_cmd *mode_cmd) +{ + struct intel_framebuffer *intel_fb; + struct drm_buffer_object *bo; + struct drm_crtc *crtc; + + intel_fb = to_intel_framebuffer(fb); + + mutex_lock(&dev->struct_mutex); + bo = drm_lookup_buffer_object(file_priv, mode_cmd->handle, 0); + mutex_unlock(&dev->struct_mutex); + + if (!bo) + return -EINVAL; + drm_helper_mode_fill_fb_struct(fb, mode_cmd); + + drm_bo_usage_deref_unlocked(&intel_fb->bo); + + intel_fb->bo = bo; + + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { + if (crtc->fb == fb) { + struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; + crtc_funcs->mode_set_base(crtc, crtc->x, crtc->y); + } + } + return 0; +} + +static const struct drm_mode_config_funcs intel_mode_funcs = { + .resize_fb = intel_insert_new_fb, + .fb_create = intel_user_framebuffer_create, + .fb_changed = intelfb_probe, +}; + +void intel_modeset_init(struct drm_device *dev) +{ + int num_pipe; + int i; + + drm_mode_config_init(dev); + + dev->mode_config.min_width = 0; + dev->mode_config.min_height = 0; + + dev->mode_config.funcs = (void *)&intel_mode_funcs; + + if (IS_I965G(dev)) { + dev->mode_config.max_width = 8192; + dev->mode_config.max_height = 8192; + } else { + dev->mode_config.max_width = 2048; + dev->mode_config.max_height = 2048; + } + + /* set memory base */ + if (IS_I9XX(dev)) + dev->mode_config.fb_base = pci_resource_start(dev->pdev, 2); + else + dev->mode_config.fb_base = pci_resource_start(dev->pdev, 0); + + if (IS_MOBILE(dev) || IS_I9XX(dev)) + num_pipe = 2; + else + num_pipe = 1; + DRM_DEBUG("%d display pipe%s available.\n", + num_pipe, num_pipe > 1 ? "s" : ""); + + for (i = 0; i < num_pipe; i++) { + intel_crtc_init(dev, i); + } + + intel_setup_outputs(dev); + + /* setup fbs */ + //drm_initial_config(dev, false); +} + +void intel_modeset_cleanup(struct drm_device *dev) +{ + drm_mode_config_cleanup(dev); +} + + +/* current intel driver doesn't take advantage of encoders + always give back the encoder for the connector +*/ +struct drm_encoder *intel_best_encoder(struct drm_connector *connector) +{ + struct intel_output *intel_output = to_intel_output(connector); + + return &intel_output->enc; +} diff --git a/linux-core/intel_drv.h b/linux-core/intel_drv.h new file mode 100644 index 00000000..1008e271 --- /dev/null +++ b/linux-core/intel_drv.h @@ -0,0 +1,126 @@ +/* + * Copyright (c) 2006 Dave Airlie <airlied@linux.ie> + * Copyright (c) 2007 Intel Corporation + * Jesse Barnes <jesse.barnes@intel.com> + */ +#ifndef __INTEL_DRV_H__ +#define __INTEL_DRV_H__ + +#include <linux/i2c.h> +#include <linux/i2c-id.h> +#include <linux/i2c-algo-bit.h> +#include "drm_crtc.h" + +#include "drm_crtc_helper.h" +/* + * Display related stuff + */ + +/* store information about an Ixxx DVO */ +/* The i830->i865 use multiple DVOs with multiple i2cs */ +/* the i915, i945 have a single sDVO i2c bus - which is different */ +#define MAX_OUTPUTS 6 +/* maximum connectors per crtcs in the mode set */ +#define INTELFB_CONN_LIMIT 4 + +#define INTEL_I2C_BUS_DVO 1 +#define INTEL_I2C_BUS_SDVO 2 + +/* these are outputs from the chip - integrated only + external chips are via DVO or SDVO output */ +#define INTEL_OUTPUT_UNUSED 0 +#define INTEL_OUTPUT_ANALOG 1 +#define INTEL_OUTPUT_DVO 2 +#define INTEL_OUTPUT_SDVO 3 +#define INTEL_OUTPUT_LVDS 4 +#define INTEL_OUTPUT_TVOUT 5 + +#define INTEL_DVO_CHIP_NONE 0 +#define INTEL_DVO_CHIP_LVDS 1 +#define INTEL_DVO_CHIP_TMDS 2 +#define INTEL_DVO_CHIP_TVOUT 4 + +struct intel_i2c_chan { + struct drm_device *drm_dev; /* for getting at dev. private (mmio etc.) */ + u32 reg; /* GPIO reg */ + struct i2c_adapter adapter; + struct i2c_algo_bit_data algo; + u8 slave_addr; +}; + +struct intel_framebuffer { + struct drm_framebuffer base; + struct drm_buffer_object *bo; + struct drm_bo_kmap_obj kmap; +}; + + +struct intel_output { + struct drm_connector base; + + struct drm_encoder enc; + int type; + struct intel_i2c_chan *i2c_bus; /* for control functions */ + struct intel_i2c_chan *ddc_bus; /* for DDC only stuff */ + bool load_detect_temp; + void *dev_priv; +}; + +struct intel_crtc { + struct drm_crtc base; + int pipe; + int plane; + uint32_t cursor_addr; + u8 lut_r[256], lut_g[256], lut_b[256]; + int dpms_mode; + struct intel_framebuffer *fbdev_fb; + /* a mode_set for fbdev users on this crtc */ + struct drm_mode_set mode_set; +}; + +#define to_intel_crtc(x) container_of(x, struct intel_crtc, base) +#define to_intel_output(x) container_of(x, struct intel_output, base) +#define enc_to_intel_output(x) container_of(x, struct intel_output, enc) +#define to_intel_framebuffer(x) container_of(x, struct intel_framebuffer, base) + +struct intel_i2c_chan *intel_i2c_create(struct drm_device *dev, const u32 reg, + const char *name); +void intel_i2c_destroy(struct intel_i2c_chan *chan); +int intel_ddc_get_modes(struct intel_output *intel_output); +extern bool intel_ddc_probe(struct intel_output *intel_output); + +extern void intel_crt_init(struct drm_device *dev); +extern void intel_sdvo_init(struct drm_device *dev, int output_device); +extern void intel_dvo_init(struct drm_device *dev); +extern void intel_tv_init(struct drm_device *dev); +extern void intel_lvds_init(struct drm_device *dev); + +extern void intel_crtc_load_lut(struct drm_crtc *crtc); +extern void intel_encoder_prepare (struct drm_encoder *encoder); +extern void intel_encoder_commit (struct drm_encoder *encoder); + +extern struct drm_encoder *intel_best_encoder(struct drm_connector *connector); + +extern struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev, + struct drm_crtc *crtc); +extern void intel_wait_for_vblank(struct drm_device *dev); +extern struct drm_crtc *intel_get_crtc_from_pipe(struct drm_device *dev, int pipe); +extern struct drm_crtc *intel_get_load_detect_pipe(struct intel_output *intel_output, + struct drm_display_mode *mode, + int *dpms_mode); +extern void intel_release_load_detect_pipe(struct intel_output *intel_output, + int dpms_mode); + +extern struct drm_connector* intel_sdvo_find(struct drm_device *dev, int sdvoB); +extern int intel_sdvo_supports_hotplug(struct drm_connector *connector); +extern void intel_sdvo_set_hotplug(struct drm_connector *connector, int enable); +extern int intelfb_probe(struct drm_device *dev); +extern int intelfb_remove(struct drm_device *dev, struct drm_framebuffer *fb); +extern int intelfb_resize(struct drm_device *dev, struct drm_crtc *crtc); +extern void intel_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green, + u16 blue, int regno); + +extern struct drm_framebuffer *intel_user_framebuffer_create(struct drm_device *dev, + struct drm_file *file_priv, + struct drm_mode_fb_cmd *mode_cmd); +#endif /* __INTEL_DRV_H__ */ diff --git a/linux-core/intel_dvo.c b/linux-core/intel_dvo.c new file mode 100644 index 00000000..e6df8fdd --- /dev/null +++ b/linux-core/intel_dvo.c @@ -0,0 +1,507 @@ +/* + * Copyright © 2006-2007 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Authors: + * Eric Anholt <eric@anholt.net> + */ +/* + * Copyright 2006 Dave Airlie <airlied@linux.ie> + */ + +#include <linux/i2c.h> +#include "drmP.h" +#include "drm.h" +#include "drm_crtc.h" +#include "intel_drv.h" +#include "i915_drm.h" +#include "i915_drv.h" +#include "dvo.h" + +#define SIL164_ADDR 0x38 +#define CH7xxx_ADDR 0x76 +#define TFP410_ADDR 0x38 + +extern struct intel_dvo_dev_ops sil164_ops; +extern struct intel_dvo_dev_ops ch7xxx_ops; +extern struct intel_dvo_dev_ops ivch_ops; +extern struct intel_dvo_dev_ops tfp410_ops; +extern struct intel_dvo_dev_ops ch7017_ops; + +struct intel_dvo_device intel_dvo_devices[] = { + { + .type = INTEL_DVO_CHIP_TMDS, + .name = "sil164", + .dvo_reg = DVOC, + .slave_addr = SIL164_ADDR, + .dev_ops = &sil164_ops, + }, + { + .type = INTEL_DVO_CHIP_TMDS, + .name = "ch7xxx", + .dvo_reg = DVOC, + .slave_addr = CH7xxx_ADDR, + .dev_ops = &ch7xxx_ops, + }, + { + .type = INTEL_DVO_CHIP_LVDS, + .name = "ivch", + .dvo_reg = DVOA, + .slave_addr = 0x02, /* Might also be 0x44, 0x84, 0xc4 */ + .dev_ops = &ivch_ops, + }, + { + .type = INTEL_DVO_CHIP_TMDS, + .name = "tfp410", + .dvo_reg = DVOC, + .slave_addr = TFP410_ADDR, + .dev_ops = &tfp410_ops, + }, + { + .type = INTEL_DVO_CHIP_LVDS, + .name = "ch7017", + .dvo_reg = DVOC, + .slave_addr = 0x75, + .gpio = GPIOE, + .dev_ops = &ch7017_ops, + } +}; + +static void intel_dvo_dpms(struct drm_encoder *encoder, int mode) +{ + struct drm_i915_private *dev_priv = encoder->dev->dev_private; + struct intel_output *intel_output = enc_to_intel_output(encoder); + struct intel_dvo_device *dvo = intel_output->dev_priv; + u32 dvo_reg = dvo->dvo_reg; + u32 temp = I915_READ(dvo_reg); + + if (mode == DPMSModeOn) { + I915_WRITE(dvo_reg, temp | DVO_ENABLE); + I915_READ(dvo_reg); + dvo->dev_ops->dpms(dvo, mode); + } else { + dvo->dev_ops->dpms(dvo, mode); + I915_WRITE(dvo_reg, temp & ~DVO_ENABLE); + I915_READ(dvo_reg); + } +} + +static void intel_dvo_save(struct drm_connector *connector) +{ + struct drm_i915_private *dev_priv = connector->dev->dev_private; + struct intel_output *intel_output = to_intel_output(connector); + struct intel_dvo_device *dvo = intel_output->dev_priv; + + /* Each output should probably just save the registers it touches, + * but for now, use more overkill. + */ + dev_priv->saveDVOA = I915_READ(DVOA); + dev_priv->saveDVOB = I915_READ(DVOB); + dev_priv->saveDVOC = I915_READ(DVOC); + + dvo->dev_ops->save(dvo); +} + +static void intel_dvo_restore(struct drm_connector *connector) +{ + struct drm_i915_private *dev_priv = connector->dev->dev_private; + struct intel_output *intel_output = to_intel_output(connector); + struct intel_dvo_device *dvo = intel_output->dev_priv; + + dvo->dev_ops->restore(dvo); + + I915_WRITE(DVOA, dev_priv->saveDVOA); + I915_WRITE(DVOB, dev_priv->saveDVOB); + I915_WRITE(DVOC, dev_priv->saveDVOC); +} + +static int intel_dvo_mode_valid(struct drm_connector *connector, + struct drm_display_mode *mode) +{ + struct intel_output *intel_output = to_intel_output(connector); + struct intel_dvo_device *dvo = intel_output->dev_priv; + + if (mode->flags & V_DBLSCAN) + return MODE_NO_DBLESCAN; + + /* XXX: Validate clock range */ + + if (dvo->panel_fixed_mode) { + if (mode->hdisplay > dvo->panel_fixed_mode->hdisplay) + return MODE_PANEL; + if (mode->vdisplay > dvo->panel_fixed_mode->vdisplay) + return MODE_PANEL; + } + + return dvo->dev_ops->mode_valid(dvo, mode); +} + +static bool intel_dvo_mode_fixup(struct drm_encoder *encoder, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct intel_output *intel_output = enc_to_intel_output(encoder); + struct intel_dvo_device *dvo = intel_output->dev_priv; + + /* If we have timings from the BIOS for the panel, put them in + * to the adjusted mode. The CRTC will be set up for this mode, + * with the panel scaling set up to source from the H/VDisplay + * of the original mode. + */ + if (dvo->panel_fixed_mode != NULL) { +#define C(x) adjusted_mode->x = dvo->panel_fixed_mode->x + C(hdisplay); + C(hsync_start); + C(hsync_end); + C(htotal); + C(vdisplay); + C(vsync_start); + C(vsync_end); + C(vtotal); + C(clock); + drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V); +#undef C + } + + if (dvo->dev_ops->mode_fixup) + return dvo->dev_ops->mode_fixup(dvo, mode, adjusted_mode); + + return true; +} + +static void intel_dvo_mode_set(struct drm_encoder *encoder, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct drm_device *dev = encoder->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc); + struct intel_output *intel_output = enc_to_intel_output(encoder); + struct intel_dvo_device *dvo = intel_output->dev_priv; + int pipe = intel_crtc->pipe; + u32 dvo_val; + u32 dvo_reg = dvo->dvo_reg, dvo_srcdim_reg; + int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B; + + switch (dvo_reg) { + case DVOA: + default: + dvo_srcdim_reg = DVOA_SRCDIM; + break; + case DVOB: + dvo_srcdim_reg = DVOB_SRCDIM; + break; + case DVOC: + dvo_srcdim_reg = DVOC_SRCDIM; + break; + } + + dvo->dev_ops->mode_set(dvo, mode, adjusted_mode); + + /* Save the data order, since I don't know what it should be set to. */ + dvo_val = I915_READ(dvo_reg) & + (DVO_PRESERVE_MASK | DVO_DATA_ORDER_GBRG); + dvo_val |= DVO_DATA_ORDER_FP | DVO_BORDER_ENABLE | + DVO_BLANK_ACTIVE_HIGH; + + if (pipe == 1) + dvo_val |= DVO_PIPE_B_SELECT; + dvo_val |= DVO_PIPE_STALL; + if (adjusted_mode->flags & V_PHSYNC) + dvo_val |= DVO_HSYNC_ACTIVE_HIGH; + if (adjusted_mode->flags & V_PVSYNC) + dvo_val |= DVO_VSYNC_ACTIVE_HIGH; + + I915_WRITE(dpll_reg, I915_READ(dpll_reg) | DPLL_DVO_HIGH_SPEED); + + /*I915_WRITE(DVOB_SRCDIM, + (adjusted_mode->hdisplay << DVO_SRCDIM_HORIZONTAL_SHIFT) | + (adjusted_mode->VDisplay << DVO_SRCDIM_VERTICAL_SHIFT));*/ + I915_WRITE(dvo_srcdim_reg, + (adjusted_mode->hdisplay << DVO_SRCDIM_HORIZONTAL_SHIFT) | + (adjusted_mode->vdisplay << DVO_SRCDIM_VERTICAL_SHIFT)); + /*I915_WRITE(DVOB, dvo_val);*/ + I915_WRITE(dvo_reg, dvo_val); +} + +/** + * Detect the output connection on our DVO device. + * + * Unimplemented. + */ +static enum drm_connector_status intel_dvo_detect(struct drm_connector *connector) +{ + struct intel_output *intel_output = to_intel_output(connector); + struct intel_dvo_device *dvo = intel_output->dev_priv; + + return dvo->dev_ops->detect(dvo); +} + +static int intel_dvo_get_modes(struct drm_connector *connector) +{ + struct intel_output *intel_output = to_intel_output(connector); + struct intel_dvo_device *dvo = intel_output->dev_priv; + + /* We should probably have an i2c driver get_modes function for those + * devices which will have a fixed set of modes determined by the chip + * (TV-out, for example), but for now with just TMDS and LVDS, + * that's not the case. + */ + intel_ddc_get_modes(intel_output); + if (!list_empty(&connector->probed_modes)) + return 1; + +#if 0 + if (intel_output->i2c_drv->vid_rec->get_modes) + { + modes = intel_output->i2c_drv->vid_rec->get_modes (intel_output->i2c_drv->dev_priv); + if (modes != NULL) + return modes; + } +#endif + + if (dvo->panel_fixed_mode != NULL) { + struct drm_display_mode *mode; + mode = drm_mode_duplicate(connector->dev, dvo->panel_fixed_mode); + if (mode) { + drm_mode_probed_add(connector, mode); + return 1; + } + } + return 0; +} + +static void intel_dvo_destroy (struct drm_connector *connector) +{ + struct intel_output *intel_output = to_intel_output(connector); + struct intel_dvo_device *dvo = intel_output->dev_priv; + + if (dvo) { + if (dvo->dev_ops->destroy) + dvo->dev_ops->destroy(dvo); + if (dvo->panel_fixed_mode) + kfree(dvo->panel_fixed_mode); + /* no need, in i830_dvoices[] now */ + //kfree(dvo); + } + if (intel_output->i2c_bus) + intel_i2c_destroy(intel_output->i2c_bus); + if (intel_output->ddc_bus) + intel_i2c_destroy(intel_output->ddc_bus); + drm_sysfs_connector_remove(connector); + drm_connector_cleanup(connector); + kfree(intel_output); +} + +#ifdef RANDR_GET_CRTC_INTERFACE +static struct drm_crtc *intel_dvo_get_crtc(struct drm_connector *connector) +{ + struct drm_device *dev = connector->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_output *intel_output = to_intel_output(connector); + struct intel_dvo_device *dvo = intel_output->dev_priv; + int pipe = !!(I915_READ(dvo->dvo_reg) & SDVO_PIPE_B_SELECT); + + return intel_pipe_to_crtc(pScrn, pipe); +} +#endif + +static const struct drm_encoder_helper_funcs intel_dvo_helper_funcs = { + .dpms = intel_dvo_dpms, + .mode_fixup = intel_dvo_mode_fixup, + .prepare = intel_encoder_prepare, + .mode_set = intel_dvo_mode_set, + .commit = intel_encoder_commit, +}; + +static const struct drm_connector_funcs intel_dvo_connector_funcs = { + .save = intel_dvo_save, + .restore = intel_dvo_restore, + .detect = intel_dvo_detect, + .destroy = intel_dvo_destroy, + .fill_modes = drm_helper_probe_single_connector_modes, +}; + +static const struct drm_connector_helper_funcs intel_dvo_connector_helper_funcs = { + .mode_valid = intel_dvo_mode_valid, + .get_modes = intel_dvo_get_modes, + .best_encoder = intel_best_encoder, +}; + +void intel_dvo_enc_destroy(struct drm_encoder *encoder) +{ + drm_encoder_cleanup(encoder); +} + +static const struct drm_encoder_funcs intel_dvo_enc_funcs = { + .destroy = intel_dvo_enc_destroy, +}; + + +/** + * Attempts to get a fixed panel timing for LVDS (currently only the i830). + * + * Other chips with DVO LVDS will need to extend this to deal with the LVDS + * chip being on DVOB/C and having multiple pipes. + */ +static struct drm_display_mode * +intel_dvo_get_current_mode (struct drm_connector *connector) +{ + struct drm_device *dev = connector->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_output *intel_output = to_intel_output(connector); + struct intel_dvo_device *dvo = intel_output->dev_priv; + uint32_t dvo_reg = dvo->dvo_reg; + uint32_t dvo_val = I915_READ(dvo_reg); + struct drm_display_mode *mode = NULL; + + /* If the DVO port is active, that'll be the LVDS, so we can pull out + * its timings to get how the BIOS set up the panel. + */ + if (dvo_val & DVO_ENABLE) { + struct drm_crtc *crtc; + int pipe = (dvo_val & DVO_PIPE_B_SELECT) ? 1 : 0; + + crtc = intel_get_crtc_from_pipe(dev, pipe); + if (crtc) { + mode = intel_crtc_mode_get(dev, crtc); + + if (mode) { + mode->type |= DRM_MODE_TYPE_PREFERRED; + if (dvo_val & DVO_HSYNC_ACTIVE_HIGH) + mode->flags |= V_PHSYNC; + if (dvo_val & DVO_VSYNC_ACTIVE_HIGH) + mode->flags |= V_PVSYNC; + } + } + } + return mode; +} + +void intel_dvo_init(struct drm_device *dev) +{ + struct intel_output *intel_output; + struct intel_dvo_device *dvo; + struct intel_i2c_chan *i2cbus = NULL; + int ret = 0; + int i; + int gpio_inited = 0; + int encoder_type = DRM_MODE_ENCODER_NONE; + intel_output = kzalloc (sizeof(struct intel_output), GFP_KERNEL); + if (!intel_output) + return; + + /* Set up the DDC bus */ + intel_output->ddc_bus = intel_i2c_create(dev, GPIOD, "DVODDC_D"); + if (!intel_output->ddc_bus) + goto free_intel; + + /* Now, try to find a controller */ + for (i = 0; i < ARRAY_SIZE(intel_dvo_devices); i++) { + struct drm_connector *connector = &intel_output->base; + int gpio; + + dvo = &intel_dvo_devices[i]; + + /* Allow the I2C driver info to specify the GPIO to be used in + * special cases, but otherwise default to what's defined + * in the spec. + */ + if (dvo->gpio != 0) + gpio = dvo->gpio; + else if (dvo->type == INTEL_DVO_CHIP_LVDS) + gpio = GPIOB; + else + gpio = GPIOE; + + /* Set up the I2C bus necessary for the chip we're probing. + * It appears that everything is on GPIOE except for panels + * on i830 laptops, which are on GPIOB (DVOA). + */ + if (gpio_inited != gpio) { + if (i2cbus != NULL) + intel_i2c_destroy(i2cbus); + if (!(i2cbus = intel_i2c_create(dev, gpio, + gpio == GPIOB ? "DVOI2C_B" : "DVOI2C_E"))) { + continue; + } + gpio_inited = gpio; + } + + if (dvo->dev_ops!= NULL) + ret = dvo->dev_ops->init(dvo, i2cbus); + else + ret = false; + + if (!ret) + continue; + + intel_output->type = INTEL_OUTPUT_DVO; + switch (dvo->type) { + case INTEL_DVO_CHIP_TMDS: + // connector = DRM_MODE_CONNECTOR_DVID; + drm_connector_init(dev, connector, &intel_dvo_connector_funcs, + DRM_MODE_CONNECTOR_DVII); + encoder_type = DRM_MODE_ENCODER_TMDS; + break; + case INTEL_DVO_CHIP_LVDS: + // connector = DRM_MODE_CONNECTOR_LVDS; + drm_connector_init(dev, connector, &intel_dvo_connector_funcs, + DRM_MODE_CONNECTOR_LVDS); + encoder_type = DRM_MODE_ENCODER_LVDS; + break; + } + + drm_connector_helper_add(connector, &intel_dvo_connector_helper_funcs); + connector->display_info.subpixel_order = SubPixelHorizontalRGB; + connector->interlace_allowed = false; + connector->doublescan_allowed = false; + + intel_output->dev_priv = dvo; + intel_output->i2c_bus = i2cbus; + + drm_encoder_init(dev, &intel_output->enc, &intel_dvo_enc_funcs, encoder_type); + drm_encoder_helper_add(&intel_output->enc, &intel_dvo_helper_funcs); + + drm_mode_connector_attach_encoder(&intel_output->base, &intel_output->enc); + if (dvo->type == INTEL_DVO_CHIP_LVDS) { + /* For our LVDS chipsets, we should hopefully be able + * to dig the fixed panel mode out of the BIOS data. + * However, it's in a different format from the BIOS + * data on chipsets with integrated LVDS (stored in AIM + * headers, likely), so for now, just get the current + * mode being output through DVO. + */ + dvo->panel_fixed_mode = intel_dvo_get_current_mode(connector); + dvo->panel_wants_dither = true; + } + + drm_sysfs_connector_add(connector); + return; + } + + intel_i2c_destroy(intel_output->ddc_bus); + /* Didn't find a chip, so tear down. */ + if (i2cbus != NULL) + intel_i2c_destroy(i2cbus); +free_intel: + kfree(intel_output); +} diff --git a/linux-core/intel_fb.c b/linux-core/intel_fb.c new file mode 100644 index 00000000..856ec868 --- /dev/null +++ b/linux-core/intel_fb.c @@ -0,0 +1,1011 @@ +/* + * Copyright © 2007 David Airlie + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Authors: + * David Airlie + */ + /* + * Modularization + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/tty.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/fb.h> +#include <linux/init.h> + +#include "drmP.h" +#include "drm.h" +#include "drm_crtc.h" +#include "intel_drv.h" +#include "i915_drm.h" +#include "i915_drv.h" + +struct intelfb_par { + struct drm_device *dev; + struct drm_display_mode *our_mode; + struct intel_framebuffer *intel_fb; + int crtc_count; + /* crtc currently bound to this */ + uint32_t crtc_ids[2]; +}; +/* +static int +var_to_refresh(const struct fb_var_screeninfo *var) +{ + int xtot = var->xres + var->left_margin + var->right_margin + + var->hsync_len; + int ytot = var->yres + var->upper_margin + var->lower_margin + + var->vsync_len; + + return (1000000000 / var->pixclock * 1000 + 500) / xtot / ytot; +}*/ + +static int intelfb_setcolreg(unsigned regno, unsigned red, unsigned green, + unsigned blue, unsigned transp, + struct fb_info *info) +{ + struct intelfb_par *par = info->par; + struct drm_device *dev = par->dev; + struct drm_crtc *crtc; + int i; + + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + struct drm_mode_set *modeset = &intel_crtc->mode_set; + struct drm_framebuffer *fb = modeset->fb; + + for (i = 0; i < par->crtc_count; i++) + if (crtc->base.id == par->crtc_ids[i]) + break; + + if (i == par->crtc_count) + continue; + + + if (regno > 255) + return 1; + + if (fb->depth == 8) { + intel_crtc_fb_gamma_set(crtc, red, green, blue, regno); + return 0; + } + + if (regno < 16) { + switch (fb->depth) { + case 15: + fb->pseudo_palette[regno] = ((red & 0xf800) >> 1) | + ((green & 0xf800) >> 6) | + ((blue & 0xf800) >> 11); + break; + case 16: + fb->pseudo_palette[regno] = (red & 0xf800) | + ((green & 0xfc00) >> 5) | + ((blue & 0xf800) >> 11); + break; + case 24: + case 32: + fb->pseudo_palette[regno] = ((red & 0xff00) << 8) | + (green & 0xff00) | + ((blue & 0xff00) >> 8); + break; + } + } + } + return 0; +} + +static int intelfb_check_var(struct fb_var_screeninfo *var, + struct fb_info *info) +{ + struct intelfb_par *par = info->par; + struct intel_framebuffer *intel_fb = par->intel_fb; + struct drm_framebuffer *fb = &intel_fb->base; + int depth; + + if (var->pixclock == -1 || !var->pixclock) + return -EINVAL; + + /* Need to resize the fb object !!! */ + if (var->xres > fb->width || var->yres > fb->height) { + DRM_ERROR("Requested width/height is greater than current fb object %dx%d > %dx%d\n",var->xres,var->yres,fb->width,fb->height); + DRM_ERROR("Need resizing code.\n"); + return -EINVAL; + } + + switch (var->bits_per_pixel) { + case 16: + depth = (var->green.length == 6) ? 16 : 15; + break; + case 32: + depth = (var->transp.length > 0) ? 32 : 24; + break; + default: + depth = var->bits_per_pixel; + break; + } + + switch (depth) { + case 8: + var->red.offset = 0; + var->green.offset = 0; + var->blue.offset = 0; + var->red.length = 8; + var->green.length = 8; + var->blue.length = 8; + var->transp.length = 0; + var->transp.offset = 0; + break; + case 15: + var->red.offset = 10; + var->green.offset = 5; + var->blue.offset = 0; + var->red.length = 5; + var->green.length = 5; + var->blue.length = 5; + var->transp.length = 1; + var->transp.offset = 15; + break; + case 16: + var->red.offset = 11; + var->green.offset = 5; + var->blue.offset = 0; + var->red.length = 5; + var->green.length = 6; + var->blue.length = 5; + var->transp.length = 0; + var->transp.offset = 0; + break; + case 24: + var->red.offset = 16; + var->green.offset = 8; + var->blue.offset = 0; + var->red.length = 8; + var->green.length = 8; + var->blue.length = 8; + var->transp.length = 0; + var->transp.offset = 0; + break; + case 32: + var->red.offset = 16; + var->green.offset = 8; + var->blue.offset = 0; + var->red.length = 8; + var->green.length = 8; + var->blue.length = 8; + var->transp.length = 8; + var->transp.offset = 24; + break; + default: + return -EINVAL; + } + + return 0; +} + +/* this will let fbcon do the mode init */ +/* FIXME: take mode config lock? */ +static int intelfb_set_par(struct fb_info *info) +{ + struct intelfb_par *par = info->par; + struct drm_device *dev = par->dev; + struct fb_var_screeninfo *var = &info->var; + int i; + + DRM_DEBUG("%d %d\n", var->xres, var->pixclock); + + if (var->pixclock != -1) { + + DRM_ERROR("PIXEL CLCOK SET\n"); +#if 0 + struct intel_framebuffer *intel_fb = par->intel_fb; + struct drm_framebuffer *fb = &intel_fb->base; + struct drm_display_mode *drm_mode, *search_mode; + struct drm_connector *connector = NULL; + struct drm_device *dev = par->dev; + + int found = 0; + + switch (var->bits_per_pixel) { + case 16: + fb->depth = (var->green.length == 6) ? 16 : 15; + break; + case 32: + fb->depth = (var->transp.length > 0) ? 32 : 24; + break; + default: + fb->depth = var->bits_per_pixel; + break; + } + + fb->bits_per_pixel = var->bits_per_pixel; + + info->fix.line_length = fb->pitch; + info->fix.smem_len = info->fix.line_length * fb->height; + info->fix.visual = (fb->depth == 8) ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR; + + info->screen_size = info->fix.smem_len; /* ??? */ + /* reuse desired mode if possible */ + /* create a drm mode */ + drm_mode = drm_mode_create(dev); + drm_mode->hdisplay = var->xres; + drm_mode->hsync_start = drm_mode->hdisplay + var->right_margin; + drm_mode->hsync_end = drm_mode->hsync_start + var->hsync_len; + drm_mode->htotal = drm_mode->hsync_end + var->left_margin; + drm_mode->vdisplay = var->yres; + drm_mode->vsync_start = drm_mode->vdisplay + var->lower_margin; + drm_mode->vsync_end = drm_mode->vsync_start + var->vsync_len; + drm_mode->vtotal = drm_mode->vsync_end + var->upper_margin; + drm_mode->clock = PICOS2KHZ(var->pixclock); + drm_mode->vrefresh = drm_mode_vrefresh(drm_mode); + drm_mode->flags = 0; + drm_mode->flags |= var->sync & FB_SYNC_HOR_HIGH_ACT ? V_PHSYNC : V_NHSYNC; + drm_mode->flags |= var->sync & FB_SYNC_VERT_HIGH_ACT ? V_PVSYNC : V_NVSYNC; + + drm_mode_set_name(drm_mode); + drm_mode_set_crtcinfo(drm_mode, CRTC_INTERLACE_HALVE_V); + + found = 0; + list_for_each_entry(connector, &dev->mode_config.connector_list, head) { + if (connector->encoder && + connector->encoder->crtc == par->set.crtc){ + found = 1; + break; + } + } + + /* no connector bound, bail */ + if (!found) + return -EINVAL; + + found = 0; + drm_mode_debug_printmodeline(drm_mode); + list_for_each_entry(search_mode, &connector->modes, head) { + drm_mode_debug_printmodeline(search_mode); + if (drm_mode_equal(drm_mode, search_mode)) { + drm_mode_destroy(dev, drm_mode); + drm_mode = search_mode; + found = 1; + break; + } + } + + /* If we didn't find a matching mode that exists on our connector, + * create a new attachment for the incoming user specified mode + */ + if (!found) { + if (par->our_mode) { + /* this also destroys the mode */ + drm_mode_detachmode_crtc(dev, par->our_mode); + } + + par->set.mode = drm_mode; + par->our_mode = drm_mode; + drm_mode_debug_printmodeline(drm_mode); + /* attach mode */ + drm_mode_attachmode_crtc(dev, par->set.crtc, par->set.mode); + } else { + par->set.mode = drm_mode; + if (par->our_mode) + drm_mode_detachmode_crtc(dev, par->our_mode); + par->our_mode = NULL; + } + return par->set.crtc->funcs->set_config(&par->set); +#endif + return -EINVAL; + } else { + struct drm_crtc *crtc; + int ret; + + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + + for (i = 0; i < par->crtc_count; i++) + if (crtc->base.id == par->crtc_ids[i]) + break; + + if (i == par->crtc_count) + continue; + + if (crtc->fb == intel_crtc->mode_set.fb) { + ret = crtc->funcs->set_config(&intel_crtc->mode_set); + if (ret) + return ret; + } + } + return 0; + } +} + +#if 0 +static void intelfb_copyarea(struct fb_info *info, + const struct fb_copyarea *region) +{ + struct intelfb_par *par = info->par; + struct drm_device *dev = par->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + u32 src_x1, src_y1, dst_x1, dst_y1, dst_x2, dst_y2, offset; + u32 cmd, rop_depth_pitch, src_pitch; + RING_LOCALS; + + cmd = XY_SRC_COPY_BLT_CMD; + src_x1 = region->sx; + src_y1 = region->sy; + dst_x1 = region->dx; + dst_y1 = region->dy; + dst_x2 = region->dx + region->width; + dst_y2 = region->dy + region->height; + offset = par->fb->offset; + rop_depth_pitch = BLT_ROP_GXCOPY | par->fb->pitch; + src_pitch = par->fb->pitch; + + switch (par->fb->bits_per_pixel) { + case 16: + rop_depth_pitch |= BLT_DEPTH_16_565; + break; + case 32: + rop_depth_pitch |= BLT_DEPTH_32; + cmd |= XY_SRC_COPY_BLT_WRITE_ALPHA | XY_SRC_COPY_BLT_WRITE_RGB; + break; + } + + BEGIN_LP_RING(8); + OUT_RING(cmd); + OUT_RING(rop_depth_pitch); + OUT_RING((dst_y1 << 16) | (dst_x1 & 0xffff)); + OUT_RING((dst_y2 << 16) | (dst_x2 & 0xffff)); + OUT_RING(offset); + OUT_RING((src_y1 << 16) | (src_x1 & 0xffff)); + OUT_RING(src_pitch); + OUT_RING(offset); + ADVANCE_LP_RING(); +} + +#define ROUND_UP_TO(x, y) (((x) + (y) - 1) / (y) * (y)) +#define ROUND_DOWN_TO(x, y) ((x) / (y) * (y)) + +void intelfb_imageblit(struct fb_info *info, const struct fb_image *image) +{ + struct intelfb_par *par = info->par; + struct drm_device *dev = par->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + u32 cmd, rop_pitch_depth, tmp; + int nbytes, ndwords, pad; + u32 dst_x1, dst_y1, dst_x2, dst_y2, offset, bg, fg; + int dat, ix, iy, iw; + int i, j; + RING_LOCALS; + + /* size in bytes of a padded scanline */ + nbytes = ROUND_UP_TO(image->width, 16) / 8; + + /* Total bytes of padded scanline data to write out. */ + nbytes *= image->height; + + /* + * Check if the glyph data exceeds the immediate mode limit. + * It would take a large font (1K pixels) to hit this limit. + */ + if (nbytes > 128 || image->depth != 1) + return cfb_imageblit(info, image); + + /* Src data is packaged a dword (32-bit) at a time. */ + ndwords = ROUND_UP_TO(nbytes, 4) / 4; + + /* + * Ring has to be padded to a quad word. But because the command starts + with 7 bytes, pad only if there is an even number of ndwords + */ + pad = !(ndwords % 2); + + DRM_DEBUG("imageblit %dx%dx%d to (%d,%d)\n", image->width, + image->height, image->depth, image->dx, image->dy); + DRM_DEBUG("nbytes: %d, ndwords: %d, pad: %d\n", nbytes, ndwords, pad); + + tmp = (XY_MONO_SRC_COPY_IMM_BLT & 0xff) + ndwords; + cmd = (XY_MONO_SRC_COPY_IMM_BLT & ~0xff) | tmp; + offset = par->fb->offset; + dst_x1 = image->dx; + dst_y1 = image->dy; + dst_x2 = image->dx + image->width; + dst_y2 = image->dy + image->height; + rop_pitch_depth = BLT_ROP_GXCOPY | par->fb->pitch; + + switch (par->fb->bits_per_pixel) { + case 8: + rop_pitch_depth |= BLT_DEPTH_8; + fg = image->fg_color; + bg = image->bg_color; + break; + case 16: + rop_pitch_depth |= BLT_DEPTH_16_565; + fg = par->fb->pseudo_palette[image->fg_color]; + bg = par->fb->pseudo_palette[image->bg_color]; + break; + case 32: + rop_pitch_depth |= BLT_DEPTH_32; + cmd |= XY_SRC_COPY_BLT_WRITE_ALPHA | XY_SRC_COPY_BLT_WRITE_RGB; + fg = par->fb->pseudo_palette[image->fg_color]; + bg = par->fb->pseudo_palette[image->bg_color]; + break; + default: + DRM_ERROR("unknown depth %d\n", par->fb->bits_per_pixel); + break; + } + + BEGIN_LP_RING(8 + ndwords); + OUT_RING(cmd); + OUT_RING(rop_pitch_depth); + OUT_RING((dst_y1 << 16) | (dst_x1 & 0xffff)); + OUT_RING((dst_y2 << 16) | (dst_x2 & 0xffff)); + OUT_RING(offset); + OUT_RING(bg); + OUT_RING(fg); + ix = iy = 0; + iw = ROUND_UP_TO(image->width, 8) / 8; + while (ndwords--) { + dat = 0; + for (j = 0; j < 2; ++j) { + for (i = 0; i < 2; ++i) { + if (ix != iw || i == 0) + dat |= image->data[iy*iw + ix++] << (i+j*2)*8; + } + if (ix == iw && iy != (image->height - 1)) { + ix = 0; + ++iy; + } + } + OUT_RING(dat); + } + if (pad) + OUT_RING(MI_NOOP); + ADVANCE_LP_RING(); +} +#endif +static int intelfb_pan_display(struct fb_var_screeninfo *var, + struct fb_info *info) +{ + struct intelfb_par *par = info->par; + struct drm_device *dev = par->dev; + struct drm_mode_set *modeset; + struct drm_crtc *crtc; + struct intel_crtc *intel_crtc; + int ret = 0; + int i; + + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { + + for (i = 0; i < par->crtc_count; i++) + if (crtc->base.id == par->crtc_ids[i]) + break; + + if (i == par->crtc_count) + continue; + + intel_crtc = to_intel_crtc(crtc); + modeset = &intel_crtc->mode_set; + + modeset->x = var->xoffset; + modeset->y = var->yoffset; + + if (modeset->num_connectors) { + ret = crtc->funcs->set_config(modeset); + + if (!ret) { + info->var.xoffset = var->xoffset; + info->var.yoffset = var->yoffset; + } + } + } + + return ret; +} + +static struct fb_ops intelfb_ops = { + .owner = THIS_MODULE, + //.fb_open = intelfb_open, + //.fb_read = intelfb_read, + //.fb_write = intelfb_write, + //.fb_release = intelfb_release, + //.fb_ioctl = intelfb_ioctl, + .fb_check_var = intelfb_check_var, + .fb_set_par = intelfb_set_par, + .fb_setcolreg = intelfb_setcolreg, + .fb_fillrect = cfb_fillrect, + .fb_copyarea = cfb_copyarea, //intelfb_copyarea, + .fb_imageblit = cfb_imageblit, //intelfb_imageblit, + .fb_pan_display = intelfb_pan_display, +}; + +/** + * Curretly it is assumed that the old framebuffer is reused. + * + * LOCKING + * caller should hold the mode config lock. + * + */ +int intelfb_resize(struct drm_device *dev, struct drm_crtc *crtc) +{ + struct fb_info *info; + struct drm_framebuffer *fb; + struct drm_display_mode *mode = crtc->desired_mode; + + fb = crtc->fb; + if (!fb) + return 1; + + info = fb->fbdev; + if (!info) + return 1; + + if (!mode) + return 1; + + info->var.xres = mode->hdisplay; + info->var.right_margin = mode->hsync_start - mode->hdisplay; + info->var.hsync_len = mode->hsync_end - mode->hsync_start; + info->var.left_margin = mode->htotal - mode->hsync_end; + info->var.yres = mode->vdisplay; + info->var.lower_margin = mode->vsync_start - mode->vdisplay; + info->var.vsync_len = mode->vsync_end - mode->vsync_start; + info->var.upper_margin = mode->vtotal - mode->vsync_end; + info->var.pixclock = 10000000 / mode->htotal * 1000 / mode->vtotal * 100; + /* avoid overflow */ + info->var.pixclock = info->var.pixclock * 1000 / mode->vrefresh; + + return 0; +} +EXPORT_SYMBOL(intelfb_resize); + +int intelfb_create(struct drm_device *dev, uint32_t fb_width, uint32_t fb_height, + uint32_t surface_width, uint32_t surface_height, + struct intel_framebuffer **intel_fb_p) +{ + struct fb_info *info; + struct intelfb_par *par; + struct drm_framebuffer *fb; + struct intel_framebuffer *intel_fb; + struct drm_mode_fb_cmd mode_cmd; + struct drm_buffer_object *fbo = NULL; + struct device *device = &dev->pdev->dev; + int ret; + + mode_cmd.width = surface_width;/* crtc->desired_mode->hdisplay; */ + mode_cmd.height = surface_height;/* crtc->desired_mode->vdisplay; */ + + mode_cmd.bpp = 32; + mode_cmd.pitch = mode_cmd.width * ((mode_cmd.bpp + 1) / 8); + mode_cmd.depth = 24; + + ret = drm_buffer_object_create(dev, mode_cmd.pitch * mode_cmd.height, + drm_bo_type_kernel, + DRM_BO_FLAG_READ | + DRM_BO_FLAG_WRITE | + DRM_BO_FLAG_MEM_TT | + DRM_BO_FLAG_MEM_VRAM | + DRM_BO_FLAG_NO_EVICT, + DRM_BO_HINT_DONT_FENCE, 0, 0, + &fbo); + if (ret || !fbo) { + printk(KERN_ERR "failed to allocate framebuffer\n"); + return -EINVAL; + } + + + fb = intel_user_framebuffer_create(dev, NULL, &mode_cmd); + if (!fb) { + drm_bo_usage_deref_unlocked(&fbo); + DRM_ERROR("failed to allocate fb.\n"); + return -EINVAL; + } + + list_add(&fb->filp_head, &dev->mode_config.fb_kernel_list); + + intel_fb = to_intel_framebuffer(fb); + *intel_fb_p = intel_fb; + + intel_fb->bo = fbo; + + info = framebuffer_alloc(sizeof(struct intelfb_par), device); + if (!info) + return -EINVAL; + + par = info->par; + + strcpy(info->fix.id, "inteldrmfb"); + info->fix.type = FB_TYPE_PACKED_PIXELS; + info->fix.visual = FB_VISUAL_TRUECOLOR; + info->fix.type_aux = 0; + info->fix.xpanstep = 1; /* doing it in hw */ + info->fix.ypanstep = 1; /* doing it in hw */ + info->fix.ywrapstep = 0; + info->fix.accel = FB_ACCEL_I830; + info->fix.type_aux = 0; + + info->flags = FBINFO_DEFAULT; + + info->fbops = &intelfb_ops; + + info->fix.line_length = fb->pitch; + info->fix.smem_start = intel_fb->bo->offset + dev->mode_config.fb_base; + info->fix.smem_len = info->fix.line_length * fb->height; + + info->flags = FBINFO_DEFAULT; + + ret = drm_bo_kmap(intel_fb->bo, 0, intel_fb->bo->num_pages, &intel_fb->kmap); + if (ret) + DRM_ERROR("error mapping fb: %d\n", ret); + + info->screen_base = intel_fb->kmap.virtual; + info->screen_size = info->fix.smem_len; /* FIXME */ + + memset(intel_fb->kmap.virtual, 0, info->screen_size); + + info->pseudo_palette = fb->pseudo_palette; + info->var.xres_virtual = fb->width; + info->var.yres_virtual = fb->height; + info->var.bits_per_pixel = fb->bits_per_pixel; + info->var.xoffset = 0; + info->var.yoffset = 0; + info->var.activate = FB_ACTIVATE_NOW; + info->var.height = -1; + info->var.width = -1; + + info->var.xres = fb_width; + info->var.yres = fb_height; + + if (IS_I9XX(dev)) { + info->fix.mmio_start = pci_resource_start(dev->pdev, 0); + info->fix.mmio_len = pci_resource_len(dev->pdev, 0); + } else { + info->fix.mmio_start = pci_resource_start(dev->pdev, 1); + info->fix.mmio_len = pci_resource_len(dev->pdev, 1); + } + + info->pixmap.size = 64*1024; + info->pixmap.buf_align = 8; + info->pixmap.access_align = 32; + info->pixmap.flags = FB_PIXMAP_SYSTEM; + info->pixmap.scan_align = 1; + + DRM_DEBUG("fb depth is %d\n", fb->depth); + DRM_DEBUG(" pitch is %d\n", fb->pitch); + switch(fb->depth) { + case 8: + info->var.red.offset = 0; + info->var.green.offset = 0; + info->var.blue.offset = 0; + info->var.red.length = 8; /* 8bit DAC */ + info->var.green.length = 8; + info->var.blue.length = 8; + info->var.transp.offset = 0; + info->var.transp.length = 0; + break; + case 15: + info->var.red.offset = 10; + info->var.green.offset = 5; + info->var.blue.offset = 0; + info->var.red.length = 5; + info->var.green.length = 5; + info->var.blue.length = 5; + info->var.transp.offset = 15; + info->var.transp.length = 1; + break; + case 16: + info->var.red.offset = 11; + info->var.green.offset = 5; + info->var.blue.offset = 0; + info->var.red.length = 5; + info->var.green.length = 6; + info->var.blue.length = 5; + info->var.transp.offset = 0; + break; + case 24: + info->var.red.offset = 16; + info->var.green.offset = 8; + info->var.blue.offset = 0; + info->var.red.length = 8; + info->var.green.length = 8; + info->var.blue.length = 8; + info->var.transp.offset = 0; + info->var.transp.length = 0; + break; + case 32: + info->var.red.offset = 16; + info->var.green.offset = 8; + info->var.blue.offset = 0; + info->var.red.length = 8; + info->var.green.length = 8; + info->var.blue.length = 8; + info->var.transp.offset = 24; + info->var.transp.length = 8; + break; + default: + break; + } + + fb->fbdev = info; + + par->intel_fb = intel_fb; + par->dev = dev; + + /* To allow resizeing without swapping buffers */ + printk("allocated %dx%d fb: 0x%08lx, bo %p\n", intel_fb->base.width, + intel_fb->base.height, intel_fb->bo->offset, fbo); + + return 0; +} + +static int intelfb_multi_fb_probe_crtc(struct drm_device *dev, struct drm_crtc *crtc) +{ + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + struct intel_framebuffer *intel_fb; + struct drm_framebuffer *fb; + struct drm_connector *connector; + struct fb_info *info; + struct intelfb_par *par; + struct drm_mode_set *modeset; + unsigned int width, height; + int new_fb = 0; + int ret, i, conn_count; + + if (!drm_helper_crtc_in_use(crtc)) + return 0; + + if (!crtc->desired_mode) + return 0; + + width = crtc->desired_mode->hdisplay; + height = crtc->desired_mode->vdisplay; + + /* is there an fb bound to this crtc already */ + if (!intel_crtc->mode_set.fb) { + ret = intelfb_create(dev, width, height, width, height, &intel_fb); + if (ret) + return -EINVAL; + new_fb = 1; + } else { + fb = intel_crtc->mode_set.fb; + intel_fb = to_intel_framebuffer(fb); + if ((intel_fb->base.width < width) || (intel_fb->base.height < height)) + return -EINVAL; + } + + info = intel_fb->base.fbdev; + par = info->par; + + modeset = &intel_crtc->mode_set; + modeset->fb = &intel_fb->base; + conn_count = 0; + list_for_each_entry(connector, &dev->mode_config.connector_list, head) { + if (connector->encoder) + if (connector->encoder->crtc == modeset->crtc) { + modeset->connectors[conn_count] = connector; + conn_count++; + if (conn_count > INTELFB_CONN_LIMIT) + BUG(); + } + } + + for (i = conn_count; i < INTELFB_CONN_LIMIT; i++) + modeset->connectors[i] = NULL; + + par->crtc_ids[0] = crtc->base.id; + + modeset->num_connectors = conn_count; + if (modeset->mode != modeset->crtc->desired_mode) + modeset->mode = modeset->crtc->desired_mode; + + par->crtc_count = 1; + + if (new_fb) { + info->var.pixclock = -1; + if (register_framebuffer(info) < 0) + return -EINVAL; + } else + intelfb_set_par(info); + + printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node, + info->fix.id); + return 0; +} + +static int intelfb_multi_fb_probe(struct drm_device *dev) +{ + + struct drm_crtc *crtc; + int ret = 0; + + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { + ret = intelfb_multi_fb_probe_crtc(dev, crtc); + if (ret) + return ret; + } + return ret; +} + +static int intelfb_single_fb_probe(struct drm_device *dev) +{ + struct drm_crtc *crtc; + struct drm_connector *connector; + unsigned int fb_width = (unsigned)-1, fb_height = (unsigned)-1; + unsigned int surface_width = 0, surface_height = 0; + int new_fb = 0; + int crtc_count = 0; + int ret, i, conn_count = 0; + struct intel_framebuffer *intel_fb; + struct fb_info *info; + struct intelfb_par *par; + struct drm_mode_set *modeset; + + DRM_DEBUG("\n"); + /* first up get a count of crtcs now in use and new min/maxes width/heights */ + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { + if (drm_helper_crtc_in_use(crtc)) { + if (crtc->desired_mode) { + if (crtc->desired_mode->hdisplay < fb_width) + fb_width = crtc->desired_mode->hdisplay; + + if (crtc->desired_mode->vdisplay < fb_height) + fb_height = crtc->desired_mode->vdisplay; + + if (crtc->desired_mode->hdisplay > surface_width) + surface_width = crtc->desired_mode->hdisplay; + + if (crtc->desired_mode->vdisplay > surface_height) + surface_height = crtc->desired_mode->vdisplay; + + } + crtc_count++; + } + } + + if (crtc_count == 0 || fb_width == -1 || fb_height == -1) { + /* hmm everyone went away - assume VGA cable just fell out + and will come back later. */ + return 0; + } + + /* do we have an fb already? */ + if (list_empty(&dev->mode_config.fb_kernel_list)) { + /* create an fb if we don't have one */ + ret = intelfb_create(dev, fb_width, fb_height, surface_width, surface_height, &intel_fb); + if (ret) + return -EINVAL; + new_fb = 1; + } else { + struct drm_framebuffer *fb; + fb = list_first_entry(&dev->mode_config.fb_kernel_list, struct drm_framebuffer, filp_head); + intel_fb = to_intel_framebuffer(fb); + + /* if someone hotplugs something bigger than we have already allocated, we are pwned. + As really we can't resize an fbdev that is in the wild currently due to fbdev + not really being designed for the lower layers moving stuff around under it. + - so in the grand style of things - punt. */ + if ((fb->width < surface_width) || (fb->height < surface_height)) { + DRM_ERROR("Framebuffer not large enough to scale console onto.\n"); + return -EINVAL; + } + } + + info = intel_fb->base.fbdev; + par = info->par; + + crtc_count = 0; + /* okay we need to setup new connector sets in the crtcs */ + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + modeset = &intel_crtc->mode_set; + modeset->fb = &intel_fb->base; + conn_count = 0; + list_for_each_entry(connector, &dev->mode_config.connector_list, head) { + if (connector->encoder) + if(connector->encoder->crtc == modeset->crtc) { + modeset->connectors[conn_count] = connector; + conn_count++; + if (conn_count > INTELFB_CONN_LIMIT) + BUG(); + } + } + + for (i = conn_count; i < INTELFB_CONN_LIMIT; i++) + modeset->connectors[i] = NULL; + + par->crtc_ids[crtc_count++] = crtc->base.id; + + modeset->num_connectors = conn_count; + if (modeset->mode != modeset->crtc->desired_mode) + modeset->mode = modeset->crtc->desired_mode; + } + par->crtc_count = crtc_count; + + if (new_fb) { + info->var.pixclock = -1; + if (register_framebuffer(info) < 0) + return -EINVAL; + } else + intelfb_set_par(info); + + printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node, + info->fix.id); + return 0; +} + +int intelfb_probe(struct drm_device *dev) +{ + int ret; + + DRM_DEBUG("\n"); + + /* something has changed in the lower levels of hell - deal with it + here */ + + /* two modes : a) 1 fb to rule all crtcs. + b) one fb per crtc. + two actions 1) new connected device + 2) device removed. + case a/1 : if the fb surface isn't big enough - resize the surface fb. + if the fb size isn't big enough - resize fb into surface. + if everything big enough configure the new crtc/etc. + case a/2 : undo the configuration + possibly resize down the fb to fit the new configuration. + case b/1 : see if it is on a new crtc - setup a new fb and add it. + case b/2 : teardown the new fb. + */ + + /* mode a first */ + /* search for an fb */ + if (i915_fbpercrtc == 1) { + ret = intelfb_multi_fb_probe(dev); + } else { + ret = intelfb_single_fb_probe(dev); + } + + return ret; +} +EXPORT_SYMBOL(intelfb_probe); + +int intelfb_remove(struct drm_device *dev, struct drm_framebuffer *fb) +{ + struct fb_info *info; + struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb); + + if (!fb) + return -EINVAL; + + info = fb->fbdev; + + if (info) { + unregister_framebuffer(info); + drm_bo_kunmap(&intel_fb->kmap); + drm_bo_usage_deref_unlocked(&intel_fb->bo); + framebuffer_release(info); + } + return 0; +} +EXPORT_SYMBOL(intelfb_remove); +MODULE_LICENSE("GPL"); diff --git a/linux-core/intel_i2c.c b/linux-core/intel_i2c.c new file mode 100644 index 00000000..efcbf656 --- /dev/null +++ b/linux-core/intel_i2c.c @@ -0,0 +1,190 @@ +/* + * Copyright © 2006-2007 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Authors: + * Eric Anholt <eric@anholt.net> + */ +/* + * Copyright (c) 2006 Dave Airlie <airlied@linux.ie> + * Jesse Barnes <jesse.barnes@intel.com> + */ + +#include <linux/i2c.h> +#include <linux/i2c-id.h> +#include <linux/i2c-algo-bit.h> +#include "drmP.h" +#include "drm.h" +#include "intel_drv.h" +#include "i915_drm.h" +#include "i915_drv.h" + +/* + * Intel GPIO access functions + */ + +#define I2C_RISEFALL_TIME 20 + +static int get_clock(void *data) +{ + struct intel_i2c_chan *chan = data; + struct drm_i915_private *dev_priv = chan->drm_dev->dev_private; + u32 val; + + val = I915_READ(chan->reg); + return ((val & GPIO_CLOCK_VAL_IN) != 0); +} + +static int get_data(void *data) +{ + struct intel_i2c_chan *chan = data; + struct drm_i915_private *dev_priv = chan->drm_dev->dev_private; + u32 val; + + val = I915_READ(chan->reg); + return ((val & GPIO_DATA_VAL_IN) != 0); +} + +static void set_clock(void *data, int state_high) +{ + struct intel_i2c_chan *chan = data; + struct drm_device *dev = chan->drm_dev; + struct drm_i915_private *dev_priv = chan->drm_dev->dev_private; + u32 reserved = 0, clock_bits; + + /* On most chips, these bits must be preserved in software. */ + if (!IS_I830(dev) && !IS_845G(dev)) + reserved = I915_READ(chan->reg) & (GPIO_DATA_PULLUP_DISABLE | + GPIO_CLOCK_PULLUP_DISABLE); + + if (state_high) + clock_bits = GPIO_CLOCK_DIR_IN | GPIO_CLOCK_DIR_MASK; + else + clock_bits = GPIO_CLOCK_DIR_OUT | GPIO_CLOCK_DIR_MASK | + GPIO_CLOCK_VAL_MASK; + I915_WRITE(chan->reg, reserved | clock_bits); + udelay(I2C_RISEFALL_TIME); /* wait for the line to change state */ +} + +static void set_data(void *data, int state_high) +{ + struct intel_i2c_chan *chan = data; + struct drm_device *dev = chan->drm_dev; + struct drm_i915_private *dev_priv = chan->drm_dev->dev_private; + u32 reserved = 0, data_bits; + + /* On most chips, these bits must be preserved in software. */ + if (!IS_I830(dev) && !IS_845G(dev)) + reserved = I915_READ(chan->reg) & (GPIO_DATA_PULLUP_DISABLE | + GPIO_CLOCK_PULLUP_DISABLE); + + if (state_high) + data_bits = GPIO_DATA_DIR_IN | GPIO_DATA_DIR_MASK; + else + data_bits = GPIO_DATA_DIR_OUT | GPIO_DATA_DIR_MASK | + GPIO_DATA_VAL_MASK; + + I915_WRITE(chan->reg, reserved | data_bits); + udelay(I2C_RISEFALL_TIME); /* wait for the line to change state */ +} + +/** + * intel_i2c_create - instantiate an Intel i2c bus using the specified GPIO reg + * @dev: DRM device + * @output: driver specific output device + * @reg: GPIO reg to use + * @name: name for this bus + * + * Creates and registers a new i2c bus with the Linux i2c layer, for use + * in output probing and control (e.g. DDC or SDVO control functions). + * + * Possible values for @reg include: + * %GPIOA + * %GPIOB + * %GPIOC + * %GPIOD + * %GPIOE + * %GPIOF + * %GPIOG + * %GPIOH + * see PRM for details on how these different busses are used. + */ +struct intel_i2c_chan *intel_i2c_create(struct drm_device *dev, const u32 reg, + const char *name) +{ + struct intel_i2c_chan *chan; + + chan = kzalloc(sizeof(struct intel_i2c_chan), GFP_KERNEL); + if (!chan) + goto out_free; + + chan->drm_dev = dev; + chan->reg = reg; + snprintf(chan->adapter.name, I2C_NAME_SIZE, "intel drm %s", name); + chan->adapter.owner = THIS_MODULE; +#ifndef I2C_HW_B_INTELFB +#define I2C_HW_B_INTELFB I2C_HW_B_I810 +#endif + chan->adapter.id = I2C_HW_B_INTELFB; + chan->adapter.algo_data = &chan->algo; + chan->adapter.dev.parent = &dev->pdev->dev; + chan->algo.setsda = set_data; + chan->algo.setscl = set_clock; + chan->algo.getsda = get_data; + chan->algo.getscl = get_clock; + chan->algo.udelay = 20; + chan->algo.timeout = usecs_to_jiffies(2200); + chan->algo.data = chan; + + i2c_set_adapdata(&chan->adapter, chan); + + if(i2c_bit_add_bus(&chan->adapter)) + goto out_free; + + /* JJJ: raise SCL and SDA? */ + set_data(chan, 1); + set_clock(chan, 1); + udelay(20); + + return chan; + +out_free: + kfree(chan); + return NULL; +} + +/** + * intel_i2c_destroy - unregister and free i2c bus resources + * @output: channel to free + * + * Unregister the adapter from the i2c layer, then free the structure. + */ +void intel_i2c_destroy(struct intel_i2c_chan *chan) +{ + if (!chan) + return; + + i2c_del_adapter(&chan->adapter); + kfree(chan); +} + + + diff --git a/linux-core/intel_lvds.c b/linux-core/intel_lvds.c new file mode 100644 index 00000000..04e110e4 --- /dev/null +++ b/linux-core/intel_lvds.c @@ -0,0 +1,515 @@ +/* + * Copyright © 2006-2007 Intel Corporation + * Copyright (c) 2006 Dave Airlie <airlied@linux.ie> + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Authors: + * Eric Anholt <eric@anholt.net> + * Dave Airlie <airlied@linux.ie> + * Jesse Barnes <jesse.barnes@intel.com> + */ + +#include <linux/i2c.h> +#include "drmP.h" +#include "drm.h" +#include "drm_crtc.h" +#include "drm_edid.h" +#include "intel_drv.h" +#include "i915_drm.h" +#include "i915_drv.h" + +/** + * Sets the backlight level. + * + * \param level backlight level, from 0 to intel_lvds_get_max_backlight(). + */ +static void intel_lvds_set_backlight(struct drm_device *dev, int level) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + u32 blc_pwm_ctl; + + blc_pwm_ctl = I915_READ(BLC_PWM_CTL) & ~BACKLIGHT_DUTY_CYCLE_MASK; + I915_WRITE(BLC_PWM_CTL, (blc_pwm_ctl | + (level << BACKLIGHT_DUTY_CYCLE_SHIFT))); +} + +/** + * Returns the maximum level of the backlight duty cycle field. + */ +static u32 intel_lvds_get_max_backlight(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + return ((I915_READ(BLC_PWM_CTL) & BACKLIGHT_MODULATION_FREQ_MASK) >> + BACKLIGHT_MODULATION_FREQ_SHIFT) * 2; +} + +/** + * Sets the power state for the panel. + */ +static void intel_lvds_set_power(struct drm_device *dev, bool on) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + u32 pp_status; + + if (on) { + I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) | + POWER_TARGET_ON); + do { + pp_status = I915_READ(PP_STATUS); + } while ((pp_status & PP_ON) == 0); + + intel_lvds_set_backlight(dev, dev_priv->backlight_duty_cycle); + } else { + intel_lvds_set_backlight(dev, 0); + + I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) & + ~POWER_TARGET_ON); + do { + pp_status = I915_READ(PP_STATUS); + } while (pp_status & PP_ON); + } +} + +static void intel_lvds_dpms(struct drm_encoder *encoder, int mode) +{ + struct drm_device *dev = encoder->dev; + + if (mode == DPMSModeOn) + intel_lvds_set_power(dev, true); + else + intel_lvds_set_power(dev, false); + + /* XXX: We never power down the LVDS pairs. */ +} + +static void intel_lvds_save(struct drm_connector *connector) +{ + struct drm_device *dev = connector->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + + dev_priv->savePP_ON = I915_READ(PP_ON_DELAYS); + dev_priv->savePP_OFF = I915_READ(PP_OFF_DELAYS); + dev_priv->savePP_CONTROL = I915_READ(PP_CONTROL); + dev_priv->savePP_DIVISOR = I915_READ(PP_DIVISOR); + dev_priv->saveBLC_PWM_CTL = I915_READ(BLC_PWM_CTL); + dev_priv->backlight_duty_cycle = (dev_priv->saveBLC_PWM_CTL & + BACKLIGHT_DUTY_CYCLE_MASK); + + /* + * If the light is off at server startup, just make it full brightness + */ + if (dev_priv->backlight_duty_cycle == 0) + dev_priv->backlight_duty_cycle = + intel_lvds_get_max_backlight(dev); +} + +static void intel_lvds_restore(struct drm_connector *connector) +{ + struct drm_device *dev = connector->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + + I915_WRITE(BLC_PWM_CTL, dev_priv->saveBLC_PWM_CTL); + I915_WRITE(PP_ON_DELAYS, dev_priv->savePP_ON); + I915_WRITE(PP_OFF_DELAYS, dev_priv->savePP_OFF); + I915_WRITE(PP_DIVISOR, dev_priv->savePP_DIVISOR); + I915_WRITE(PP_CONTROL, dev_priv->savePP_CONTROL); + if (dev_priv->savePP_CONTROL & POWER_TARGET_ON) + intel_lvds_set_power(dev, true); + else + intel_lvds_set_power(dev, false); +} + +static int intel_lvds_mode_valid(struct drm_connector *connector, + struct drm_display_mode *mode) +{ + struct drm_device *dev = connector->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_display_mode *fixed_mode = dev_priv->panel_fixed_mode; + + if (fixed_mode) { + if (mode->hdisplay > fixed_mode->hdisplay) + return MODE_PANEL; + if (mode->vdisplay > fixed_mode->vdisplay) + return MODE_PANEL; + } + + return MODE_OK; +} + +static bool intel_lvds_mode_fixup(struct drm_encoder *encoder, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct drm_device *dev = encoder->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc); + struct drm_encoder *tmp_encoder; + + /* Should never happen!! */ + if (!IS_I965G(dev) && intel_crtc->pipe == 0) { + printk(KERN_ERR "Can't support LVDS on pipe A\n"); + return false; + } + + /* Should never happen!! */ + list_for_each_entry(tmp_encoder, &dev->mode_config.encoder_list, head) { + if (tmp_encoder != encoder && tmp_encoder->crtc == encoder->crtc) { + printk(KERN_ERR "Can't enable LVDS and another " + "encoder on the same pipe\n"); + return false; + } + } + + /* + * If we have timings from the BIOS for the panel, put them in + * to the adjusted mode. The CRTC will be set up for this mode, + * with the panel scaling set up to source from the H/VDisplay + * of the original mode. + */ + if (dev_priv->panel_fixed_mode != NULL) { + adjusted_mode->hdisplay = dev_priv->panel_fixed_mode->hdisplay; + adjusted_mode->hsync_start = + dev_priv->panel_fixed_mode->hsync_start; + adjusted_mode->hsync_end = + dev_priv->panel_fixed_mode->hsync_end; + adjusted_mode->htotal = dev_priv->panel_fixed_mode->htotal; + adjusted_mode->vdisplay = dev_priv->panel_fixed_mode->vdisplay; + adjusted_mode->vsync_start = + dev_priv->panel_fixed_mode->vsync_start; + adjusted_mode->vsync_end = + dev_priv->panel_fixed_mode->vsync_end; + adjusted_mode->vtotal = dev_priv->panel_fixed_mode->vtotal; + adjusted_mode->clock = dev_priv->panel_fixed_mode->clock; + drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V); + } + + /* + * XXX: It would be nice to support lower refresh rates on the + * panels to reduce power consumption, and perhaps match the + * user's requested refresh rate. + */ + + return true; +} + +static void intel_lvds_prepare(struct drm_encoder *encoder) +{ + struct drm_device *dev = encoder->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + + dev_priv->saveBLC_PWM_CTL = I915_READ(BLC_PWM_CTL); + dev_priv->backlight_duty_cycle = (dev_priv->saveBLC_PWM_CTL & + BACKLIGHT_DUTY_CYCLE_MASK); + + intel_lvds_set_power(dev, false); +} + +static void intel_lvds_commit( struct drm_encoder *encoder) +{ + struct drm_device *dev = encoder->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + + if (dev_priv->backlight_duty_cycle == 0) + dev_priv->backlight_duty_cycle = + intel_lvds_get_max_backlight(dev); + + intel_lvds_set_power(dev, true); +} + +static void intel_lvds_mode_set(struct drm_encoder *encoder, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct drm_device *dev = encoder->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc); + u32 pfit_control; + + /* + * The LVDS pin pair will already have been turned on in the + * intel_crtc_mode_set since it has a large impact on the DPLL + * settings. + */ + + /* + * Enable automatic panel scaling so that non-native modes fill the + * screen. Should be enabled before the pipe is enabled, according to + * register description and PRM. + */ + if (mode->hdisplay != adjusted_mode->hdisplay || + mode->vdisplay != adjusted_mode->vdisplay) + pfit_control = (PFIT_ENABLE | VERT_AUTO_SCALE | + HORIZ_AUTO_SCALE | VERT_INTERP_BILINEAR | + HORIZ_INTERP_BILINEAR); + else + pfit_control = 0; + + if (!IS_I965G(dev)) { + if (dev_priv->panel_wants_dither) + pfit_control |= PANEL_8TO6_DITHER_ENABLE; + } + else + pfit_control |= intel_crtc->pipe << PFIT_PIPE_SHIFT; + + I915_WRITE(PFIT_CONTROL, pfit_control); +} + +/** + * Detect the LVDS connection. + * + * This always returns CONNECTOR_STATUS_CONNECTED. This connector should only have + * been set up if the LVDS was actually connected anyway. + */ +static enum drm_connector_status intel_lvds_detect(struct drm_connector *connector) +{ + return connector_status_connected; +} + +/** + * Return the list of DDC modes if available, or the BIOS fixed mode otherwise. + */ +static int intel_lvds_get_modes(struct drm_connector *connector) +{ + struct drm_device *dev = connector->dev; + struct intel_output *intel_output = to_intel_output(connector); + struct drm_i915_private *dev_priv = dev->dev_private; + int ret = 0; + + ret = intel_ddc_get_modes(intel_output); + + if (ret) + return ret; + + /* Didn't get an EDID, so + * Set wide sync ranges so we get all modes + * handed to valid_mode for checking + */ + connector->display_info.min_vfreq = 0; + connector->display_info.max_vfreq = 200; + connector->display_info.min_hfreq = 0; + connector->display_info.max_hfreq = 200; + + if (dev_priv->panel_fixed_mode != NULL) { + struct drm_display_mode *mode = + drm_mode_duplicate(dev, dev_priv->panel_fixed_mode); + drm_mode_probed_add(connector, mode); + return 1; + } + + return 0; +} + +/** + * intel_lvds_destroy - unregister and free LVDS structures + * @connector: connector to free + * + * Unregister the DDC bus for this connector then free the driver private + * structure. + */ +static void intel_lvds_destroy(struct drm_connector *connector) +{ + struct intel_output *intel_output = to_intel_output(connector); + + if (intel_output->ddc_bus) + intel_i2c_destroy(intel_output->ddc_bus); + drm_sysfs_connector_remove(connector); + drm_connector_cleanup(connector); + kfree(connector); +} + +static const struct drm_encoder_helper_funcs intel_lvds_helper_funcs = { + .dpms = intel_lvds_dpms, + .mode_fixup = intel_lvds_mode_fixup, + .prepare = intel_lvds_prepare, + .mode_set = intel_lvds_mode_set, + .commit = intel_lvds_commit, +}; + +static const struct drm_connector_helper_funcs intel_lvds_connector_helper_funcs = { + .get_modes = intel_lvds_get_modes, + .mode_valid = intel_lvds_mode_valid, + .best_encoder = intel_best_encoder, +}; + +static const struct drm_connector_funcs intel_lvds_connector_funcs = { + .save = intel_lvds_save, + .restore = intel_lvds_restore, + .detect = intel_lvds_detect, + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = intel_lvds_destroy, +}; + + +static void intel_lvds_enc_destroy(struct drm_encoder *encoder) +{ + drm_encoder_cleanup(encoder); +} + +static const struct drm_encoder_funcs intel_lvds_enc_funcs = { + .destroy = intel_lvds_enc_destroy, +}; + + + +/** + * intel_lvds_init - setup LVDS connectors on this device + * @dev: drm device + * + * Create the connector, register the LVDS DDC bus, and try to figure out what + * modes we can display on the LVDS panel (if present). + */ +void intel_lvds_init(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_output *intel_output; + struct drm_connector *connector; + struct drm_encoder *encoder; + struct drm_display_mode *scan; /* *modes, *bios_mode; */ + struct drm_crtc *crtc; + u32 lvds; + int pipe; + + intel_output = kzalloc(sizeof(struct intel_output), GFP_KERNEL); + if (!intel_output) { + return; + } + + connector = &intel_output->base; + encoder = &intel_output->enc; + drm_connector_init(dev, &intel_output->base, &intel_lvds_connector_funcs, + DRM_MODE_CONNECTOR_LVDS); + + drm_encoder_init(dev, &intel_output->enc, &intel_lvds_enc_funcs, + DRM_MODE_ENCODER_LVDS); + + drm_mode_connector_attach_encoder(&intel_output->base, &intel_output->enc); + intel_output->type = INTEL_OUTPUT_LVDS; + + drm_encoder_helper_add(encoder, &intel_lvds_helper_funcs); + drm_connector_helper_add(connector, &intel_lvds_connector_helper_funcs); + connector->display_info.subpixel_order = SubPixelHorizontalRGB; + connector->interlace_allowed = FALSE; + connector->doublescan_allowed = FALSE; + + + /* + * LVDS discovery: + * 1) check for EDID on DDC + * 2) check for VBT data + * 3) check to see if LVDS is already on + * if none of the above, no panel + * 4) make sure lid is open + * if closed, act like it's not there for now + */ + + /* Set up the DDC bus. */ + intel_output->ddc_bus = intel_i2c_create(dev, GPIOC, "LVDSDDC_C"); + if (!intel_output->ddc_bus) { + dev_printk(KERN_ERR, &dev->pdev->dev, "DDC bus registration " + "failed.\n"); + goto failed; + } + + /* + * Attempt to get the fixed panel mode from DDC. Assume that the + * preferred mode is the right one. + */ + intel_ddc_get_modes(intel_output); + + list_for_each_entry(scan, &connector->probed_modes, head) { + if (scan->type & DRM_MODE_TYPE_PREFERRED) { + dev_priv->panel_fixed_mode = + drm_mode_duplicate(dev, scan); + goto out; /* FIXME: check for quirks */ + } + } + + /* Failed to get EDID, what about VBT? */ + if (dev_priv->vbt_mode) + dev_priv->panel_fixed_mode = + drm_mode_duplicate(dev, dev_priv->vbt_mode); + + /* + * If we didn't get EDID, try checking if the panel is already turned + * on. If so, assume that whatever is currently programmed is the + * correct mode. + */ + lvds = I915_READ(LVDS); + pipe = (lvds & LVDS_PIPEB_SELECT) ? 1 : 0; + crtc = intel_get_crtc_from_pipe(dev, pipe); + + if (crtc && (lvds & LVDS_PORT_EN)) { + dev_priv->panel_fixed_mode = intel_crtc_mode_get(dev, crtc); + if (dev_priv->panel_fixed_mode) { + dev_priv->panel_fixed_mode->type |= + DRM_MODE_TYPE_PREFERRED; + goto out; /* FIXME: check for quirks */ + } + } + + /* If we still don't have a mode after all that, give up. */ + if (!dev_priv->panel_fixed_mode) + goto failed; + + /* FIXME: detect aopen & mac mini type stuff automatically? */ + /* + * Blacklist machines with BIOSes that list an LVDS panel without + * actually having one. + */ + if (IS_I945GM(dev)) { + /* aopen mini pc */ + if (dev->pdev->subsystem_vendor == 0xa0a0) + goto failed; + + if ((dev->pdev->subsystem_vendor == 0x8086) && + (dev->pdev->subsystem_device == 0x7270)) { + /* It's a Mac Mini or Macbook Pro. + * + * Apple hardware is out to get us. The macbook pro + * has a real LVDS panel, but the mac mini does not, + * and they have the same device IDs. We'll + * distinguish by panel size, on the assumption + * that Apple isn't about to make any machines with an + * 800x600 display. + */ + + if (dev_priv->panel_fixed_mode != NULL && + dev_priv->panel_fixed_mode->hdisplay == 800 && + dev_priv->panel_fixed_mode->vdisplay == 600) { + DRM_DEBUG("Suspected Mac Mini, ignoring the LVDS\n"); + goto failed; + } + } + } + + +out: + drm_sysfs_connector_add(connector); + return; + +failed: + DRM_DEBUG("No LVDS modes found, disabling.\n"); + if (intel_output->ddc_bus) + intel_i2c_destroy(intel_output->ddc_bus); + drm_connector_cleanup(connector); + kfree(connector); +} diff --git a/linux-core/intel_modes.c b/linux-core/intel_modes.c new file mode 100644 index 00000000..79be3575 --- /dev/null +++ b/linux-core/intel_modes.c @@ -0,0 +1,61 @@ +/* + * Copyright (c) 2007 Dave Airlie <airlied@linux.ie> + * Copyright (c) 2007 Intel Corporation + * Jesse Barnes <jesse.barnes@intel.com> + */ + +#include <linux/i2c.h> +#include <linux/fb.h> +#include "drmP.h" +#include "intel_drv.h" + +/** + * intel_ddc_probe + * + */ +bool intel_ddc_probe(struct intel_output *intel_output) +{ + u8 out_buf[] = { 0x0, 0x0}; + u8 buf[2]; + int ret; + struct i2c_msg msgs[] = { + { + .addr = 0x50, + .flags = 0, + .len = 1, + .buf = out_buf, + }, + { + .addr = 0x50, + .flags = I2C_M_RD, + .len = 1, + .buf = buf, + } + }; + + ret = i2c_transfer(&intel_output->ddc_bus->adapter, msgs, 2); + if (ret == 2) + return true; + + return false; +} + +/** + * intel_ddc_get_modes - get modelist from monitor + * @connector: DRM connector device to use + * + * Fetch the EDID information from @connector using the DDC bus. + */ +int intel_ddc_get_modes(struct intel_output *intel_output) +{ + struct edid *edid; + int ret = 0; + + edid = drm_get_edid(&intel_output->base, &intel_output->ddc_bus->adapter); + if (edid) { + drm_mode_connector_update_edid_property(&intel_output->base, edid); + ret = drm_add_edid_modes(&intel_output->base, edid); + kfree(edid); + } + return ret; +} diff --git a/linux-core/intel_sdvo.c b/linux-core/intel_sdvo.c new file mode 100644 index 00000000..f0a47e2e --- /dev/null +++ b/linux-core/intel_sdvo.c @@ -0,0 +1,1153 @@ +/* + * Copyright © 2006-2007 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Authors: + * Eric Anholt <eric@anholt.net> + */ +/* + * Copyright 2006 Dave Airlie <airlied@linux.ie> + * Jesse Barnes <jesse.barnes@intel.com> + */ + +#include <linux/i2c.h> +#include <linux/delay.h> +#include "drmP.h" +#include "drm.h" +#include "drm_crtc.h" +#include "intel_drv.h" +#include "i915_drm.h" +#include "i915_drv.h" +#include "intel_sdvo_regs.h" + +struct intel_sdvo_priv { + struct intel_i2c_chan *i2c_bus; + int slaveaddr; + int output_device; + + u16 active_outputs; + + struct intel_sdvo_caps caps; + int pixel_clock_min, pixel_clock_max; + + int save_sdvo_mult; + u16 save_active_outputs; + struct intel_sdvo_dtd save_input_dtd_1, save_input_dtd_2; + struct intel_sdvo_dtd save_output_dtd[16]; + u32 save_SDVOX; +}; + +/** + * Writes the SDVOB or SDVOC with the given value, but always writes both + * SDVOB and SDVOC to work around apparent hardware issues (according to + * comments in the BIOS). + */ +void intel_sdvo_write_sdvox(struct intel_output *intel_output, u32 val) +{ + struct drm_device *dev = intel_output->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; + u32 bval = val, cval = val; + int i; + + if (sdvo_priv->output_device == SDVOB) { + cval = I915_READ(SDVOC); + } else { + bval = I915_READ(SDVOB); + } + /* + * Write the registers twice for luck. Sometimes, + * writing them only once doesn't appear to 'stick'. + * The BIOS does this too. Yay, magic + */ + for (i = 0; i < 2; i++) + { + I915_WRITE(SDVOB, bval); + I915_READ(SDVOB); + I915_WRITE(SDVOC, cval); + I915_READ(SDVOC); + } +} + +static bool intel_sdvo_read_byte(struct intel_output *intel_output, u8 addr, + u8 *ch) +{ + struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; + u8 out_buf[2]; + u8 buf[2]; + int ret; + + struct i2c_msg msgs[] = { + { + .addr = sdvo_priv->i2c_bus->slave_addr, + .flags = 0, + .len = 1, + .buf = out_buf, + }, + { + .addr = sdvo_priv->i2c_bus->slave_addr, + .flags = I2C_M_RD, + .len = 1, + .buf = buf, + } + }; + + out_buf[0] = addr; + out_buf[1] = 0; + + if ((ret = i2c_transfer(&sdvo_priv->i2c_bus->adapter, msgs, 2)) == 2) + { +// DRM_DEBUG("got back from addr %02X = %02x\n", out_buf[0], buf[0]); + *ch = buf[0]; + return true; + } + + DRM_DEBUG("i2c transfer returned %d\n", ret); + return false; +} + +static bool intel_sdvo_write_byte(struct intel_output *intel_output, int addr, + u8 ch) +{ + u8 out_buf[2]; + struct i2c_msg msgs[] = { + { + .addr = intel_output->i2c_bus->slave_addr, + .flags = 0, + .len = 2, + .buf = out_buf, + } + }; + + out_buf[0] = addr; + out_buf[1] = ch; + + if (i2c_transfer(&intel_output->i2c_bus->adapter, msgs, 1) == 1) + { + return true; + } + return false; +} + +#define SDVO_CMD_NAME_ENTRY(cmd) {cmd, #cmd} +/** Mapping of command numbers to names, for debug output */ +const static struct _sdvo_cmd_name { + u8 cmd; + char *name; +} sdvo_cmd_names[] = { + SDVO_CMD_NAME_ENTRY(SDVO_CMD_RESET), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_DEVICE_CAPS), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_FIRMWARE_REV), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_TRAINED_INPUTS), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_ACTIVE_OUTPUTS), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_ACTIVE_OUTPUTS), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_IN_OUT_MAP), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_IN_OUT_MAP), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_ATTACHED_DISPLAYS), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HOT_PLUG_SUPPORT), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_ACTIVE_HOT_PLUG), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_ACTIVE_HOT_PLUG), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_INTERRUPT_EVENT_SOURCE), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TARGET_INPUT), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TARGET_OUTPUT), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_INPUT_TIMINGS_PART1), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_INPUT_TIMINGS_PART2), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_INPUT_TIMINGS_PART1), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_INPUT_TIMINGS_PART2), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_INPUT_TIMINGS_PART1), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_OUTPUT_TIMINGS_PART1), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_OUTPUT_TIMINGS_PART2), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OUTPUT_TIMINGS_PART1), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OUTPUT_TIMINGS_PART2), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_CREATE_PREFERRED_INPUT_TIMING), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART1), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART2), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OUTPUT_PIXEL_CLOCK_RANGE), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPPORTED_CLOCK_RATE_MULTS), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_CLOCK_RATE_MULT), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_CLOCK_RATE_MULT), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPPORTED_TV_FORMATS), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_TV_FORMAT), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TV_FORMAT), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TV_RESOLUTION_SUPPORT), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_CONTROL_BUS_SWITCH), +}; + +#define SDVO_NAME(dev_priv) ((dev_priv)->output_device == SDVOB ? "SDVOB" : "SDVOC") +#define SDVO_PRIV(output) ((struct intel_sdvo_priv *) (output)->dev_priv) + +static void intel_sdvo_write_cmd(struct intel_output *intel_output, u8 cmd, + void *args, int args_len) +{ + struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; + int i; + + if (1) { + DRM_DEBUG("%s: W: %02X ", SDVO_NAME(sdvo_priv), cmd); + for (i = 0; i < args_len; i++) + printk("%02X ", ((u8 *)args)[i]); + for (; i < 8; i++) + printk(" "); + for (i = 0; i < sizeof(sdvo_cmd_names) / sizeof(sdvo_cmd_names[0]); i++) { + if (cmd == sdvo_cmd_names[i].cmd) { + printk("(%s)", sdvo_cmd_names[i].name); + break; + } + } + if (i == sizeof(sdvo_cmd_names)/ sizeof(sdvo_cmd_names[0])) + printk("(%02X)",cmd); + printk("\n"); + } + + for (i = 0; i < args_len; i++) { + intel_sdvo_write_byte(intel_output, SDVO_I2C_ARG_0 - i, ((u8*)args)[i]); + } + + intel_sdvo_write_byte(intel_output, SDVO_I2C_OPCODE, cmd); +} + +static const char *cmd_status_names[] = { + "Power on", + "Success", + "Not supported", + "Invalid arg", + "Pending", + "Target not specified", + "Scaling not supported" +}; + +static u8 intel_sdvo_read_response(struct intel_output *intel_output, void *response, + int response_len) +{ + struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; + int i; + u8 status; + u8 retry = 50; + + while (retry--) { + /* Read the command response */ + for (i = 0; i < response_len; i++) { + intel_sdvo_read_byte(intel_output, SDVO_I2C_RETURN_0 + i, + &((u8 *)response)[i]); + } + + /* read the return status */ + intel_sdvo_read_byte(intel_output, SDVO_I2C_CMD_STATUS, &status); + + if (1) { + DRM_DEBUG("%s: R: ", SDVO_NAME(sdvo_priv)); + for (i = 0; i < response_len; i++) + printk("%02X ", ((u8 *)response)[i]); + for (; i < 8; i++) + printk(" "); + if (status <= SDVO_CMD_STATUS_SCALING_NOT_SUPP) + printk("(%s)", cmd_status_names[status]); + else + printk("(??? %d)", status); + printk("\n"); + } + + if (status != SDVO_CMD_STATUS_PENDING) + return status; + + mdelay(50); + } + + return status; +} + +int intel_sdvo_get_pixel_multiplier(struct drm_display_mode *mode) +{ + if (mode->clock >= 100000) + return 1; + else if (mode->clock >= 50000) + return 2; + else + return 4; +} + +/** + * Don't check status code from this as it switches the bus back to the + * SDVO chips which defeats the purpose of doing a bus switch in the first + * place. + */ +void intel_sdvo_set_control_bus_switch(struct intel_output *intel_output, u8 target) +{ + intel_sdvo_write_cmd(intel_output, SDVO_CMD_SET_CONTROL_BUS_SWITCH, &target, 1); +} + +static bool intel_sdvo_set_target_input(struct intel_output *intel_output, bool target_0, bool target_1) +{ + struct intel_sdvo_set_target_input_args targets = {0}; + u8 status; + + if (target_0 && target_1) + return SDVO_CMD_STATUS_NOTSUPP; + + if (target_1) + targets.target_1 = 1; + + intel_sdvo_write_cmd(intel_output, SDVO_CMD_SET_TARGET_INPUT, &targets, + sizeof(targets)); + + status = intel_sdvo_read_response(intel_output, NULL, 0); + + return (status == SDVO_CMD_STATUS_SUCCESS); +} + +/** + * Return whether each input is trained. + * + * This function is making an assumption about the layout of the response, + * which should be checked against the docs. + */ +static bool intel_sdvo_get_trained_inputs(struct intel_output *intel_output, bool *input_1, bool *input_2) +{ + struct intel_sdvo_get_trained_inputs_response response; + u8 status; + + intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_TRAINED_INPUTS, NULL, 0); + status = intel_sdvo_read_response(intel_output, &response, sizeof(response)); + if (status != SDVO_CMD_STATUS_SUCCESS) + return false; + + *input_1 = response.input0_trained; + *input_2 = response.input1_trained; + return true; +} + +static bool intel_sdvo_get_active_outputs(struct intel_output *intel_output, + u16 *outputs) +{ + u8 status; + + intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_ACTIVE_OUTPUTS, NULL, 0); + status = intel_sdvo_read_response(intel_output, outputs, sizeof(*outputs)); + + return (status == SDVO_CMD_STATUS_SUCCESS); +} + +static bool intel_sdvo_set_active_outputs(struct intel_output *intel_output, + u16 outputs) +{ + u8 status; + + intel_sdvo_write_cmd(intel_output, SDVO_CMD_SET_ACTIVE_OUTPUTS, &outputs, + sizeof(outputs)); + status = intel_sdvo_read_response(intel_output, NULL, 0); + return (status == SDVO_CMD_STATUS_SUCCESS); +} + +static bool intel_sdvo_set_encoder_power_state(struct intel_output *intel_output, + int mode) +{ + u8 status, state = SDVO_ENCODER_STATE_ON; + + switch (mode) { + case DPMSModeOn: + state = SDVO_ENCODER_STATE_ON; + break; + case DPMSModeStandby: + state = SDVO_ENCODER_STATE_STANDBY; + break; + case DPMSModeSuspend: + state = SDVO_ENCODER_STATE_SUSPEND; + break; + case DPMSModeOff: + state = SDVO_ENCODER_STATE_OFF; + break; + } + + intel_sdvo_write_cmd(intel_output, SDVO_CMD_SET_ENCODER_POWER_STATE, &state, + sizeof(state)); + status = intel_sdvo_read_response(intel_output, NULL, 0); + + return (status == SDVO_CMD_STATUS_SUCCESS); +} + +static bool intel_sdvo_get_input_pixel_clock_range(struct intel_output *intel_output, + int *clock_min, + int *clock_max) +{ + struct intel_sdvo_pixel_clock_range clocks; + u8 status; + + intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE, + NULL, 0); + + status = intel_sdvo_read_response(intel_output, &clocks, sizeof(clocks)); + + if (status != SDVO_CMD_STATUS_SUCCESS) + return false; + + /* Convert the values from units of 10 kHz to kHz. */ + *clock_min = clocks.min * 10; + *clock_max = clocks.max * 10; + + return true; +} + +static bool intel_sdvo_set_target_output(struct intel_output *intel_output, + u16 outputs) +{ + u8 status; + + intel_sdvo_write_cmd(intel_output, SDVO_CMD_SET_TARGET_OUTPUT, &outputs, + sizeof(outputs)); + + status = intel_sdvo_read_response(intel_output, NULL, 0); + return (status == SDVO_CMD_STATUS_SUCCESS); +} + +static bool intel_sdvo_get_timing(struct intel_output *intel_output, u8 cmd, + struct intel_sdvo_dtd *dtd) +{ + u8 status; + + intel_sdvo_write_cmd(intel_output, cmd, NULL, 0); + status = intel_sdvo_read_response(intel_output, &dtd->part1, + sizeof(dtd->part1)); + if (status != SDVO_CMD_STATUS_SUCCESS) + return false; + + intel_sdvo_write_cmd(intel_output, cmd + 1, NULL, 0); + status = intel_sdvo_read_response(intel_output, &dtd->part2, + sizeof(dtd->part2)); + if (status != SDVO_CMD_STATUS_SUCCESS) + return false; + + return true; +} + +static bool intel_sdvo_get_input_timing(struct intel_output *intel_output, + struct intel_sdvo_dtd *dtd) +{ + return intel_sdvo_get_timing(intel_output, + SDVO_CMD_GET_INPUT_TIMINGS_PART1, dtd); +} + +static bool intel_sdvo_get_output_timing(struct intel_output *intel_output, + struct intel_sdvo_dtd *dtd) +{ + return intel_sdvo_get_timing(intel_output, + SDVO_CMD_GET_OUTPUT_TIMINGS_PART1, dtd); +} + +static bool intel_sdvo_set_timing(struct intel_output *intel_output, u8 cmd, + struct intel_sdvo_dtd *dtd) +{ + u8 status; + + intel_sdvo_write_cmd(intel_output, cmd, &dtd->part1, sizeof(dtd->part1)); + status = intel_sdvo_read_response(intel_output, NULL, 0); + if (status != SDVO_CMD_STATUS_SUCCESS) + return false; + + intel_sdvo_write_cmd(intel_output, cmd + 1, &dtd->part2, sizeof(dtd->part2)); + status = intel_sdvo_read_response(intel_output, NULL, 0); + if (status != SDVO_CMD_STATUS_SUCCESS) + return false; + + return true; +} + +static bool intel_sdvo_set_input_timing(struct intel_output *intel_output, + struct intel_sdvo_dtd *dtd) +{ + return intel_sdvo_set_timing(intel_output, + SDVO_CMD_SET_INPUT_TIMINGS_PART1, dtd); +} + +static bool intel_sdvo_set_output_timing(struct intel_output *intel_output, + struct intel_sdvo_dtd *dtd) +{ + return intel_sdvo_set_timing(intel_output, + SDVO_CMD_SET_OUTPUT_TIMINGS_PART1, dtd); +} + +#if 0 +static bool intel_sdvo_get_preferred_input_timing(struct intel_output *intel_output, + struct intel_sdvo_dtd *dtd) +{ + struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; + u8 status; + + intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART1, + NULL, 0); + + status = intel_sdvo_read_response(intel_output, &dtd->part1, + sizeof(dtd->part1)); + if (status != SDVO_CMD_STATUS_SUCCESS) + return false; + + intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART2, + NULL, 0); + status = intel_sdvo_read_response(intel_output, &dtd->part2, + sizeof(dtd->part2)); + if (status != SDVO_CMD_STATUS_SUCCESS) + return false; + + return true; +} +#endif + +static int intel_sdvo_get_clock_rate_mult(struct intel_output *intel_output) +{ + u8 response, status; + + intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_CLOCK_RATE_MULT, NULL, 0); + status = intel_sdvo_read_response(intel_output, &response, 1); + + if (status != SDVO_CMD_STATUS_SUCCESS) { + DRM_DEBUG("Couldn't get SDVO clock rate multiplier\n"); + return SDVO_CLOCK_RATE_MULT_1X; + } else { + DRM_DEBUG("Current clock rate multiplier: %d\n", response); + } + + return response; +} + +static bool intel_sdvo_set_clock_rate_mult(struct intel_output *intel_output, u8 val) +{ + u8 status; + + intel_sdvo_write_cmd(intel_output, SDVO_CMD_SET_CLOCK_RATE_MULT, &val, 1); + status = intel_sdvo_read_response(intel_output, NULL, 0); + if (status != SDVO_CMD_STATUS_SUCCESS) + return false; + + return true; +} + +static bool intel_sdvo_mode_fixup(struct drm_encoder *encoder, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + /* Make the CRTC code factor in the SDVO pixel multiplier. The SDVO + * device will be told of the multiplier during mode_set. + */ + adjusted_mode->clock *= intel_sdvo_get_pixel_multiplier(mode); + return true; +} + +static void intel_sdvo_mode_set(struct drm_encoder *encoder, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct drm_device *dev = encoder->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_crtc *crtc = encoder->crtc; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + struct intel_output *intel_output = enc_to_intel_output(encoder); + struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; + u16 width, height; + u16 h_blank_len, h_sync_len, v_blank_len, v_sync_len; + u16 h_sync_offset, v_sync_offset; + u32 sdvox; + struct intel_sdvo_dtd output_dtd; + int sdvo_pixel_multiply; + + if (!mode) + return; + + width = mode->crtc_hdisplay; + height = mode->crtc_vdisplay; + + /* do some mode translations */ + h_blank_len = mode->crtc_hblank_end - mode->crtc_hblank_start; + h_sync_len = mode->crtc_hsync_end - mode->crtc_hsync_start; + + v_blank_len = mode->crtc_vblank_end - mode->crtc_vblank_start; + v_sync_len = mode->crtc_vsync_end - mode->crtc_vsync_start; + + h_sync_offset = mode->crtc_hsync_start - mode->crtc_hblank_start; + v_sync_offset = mode->crtc_vsync_start - mode->crtc_vblank_start; + + output_dtd.part1.clock = mode->clock / 10; + output_dtd.part1.h_active = width & 0xff; + output_dtd.part1.h_blank = h_blank_len & 0xff; + output_dtd.part1.h_high = (((width >> 8) & 0xf) << 4) | + ((h_blank_len >> 8) & 0xf); + output_dtd.part1.v_active = height & 0xff; + output_dtd.part1.v_blank = v_blank_len & 0xff; + output_dtd.part1.v_high = (((height >> 8) & 0xf) << 4) | + ((v_blank_len >> 8) & 0xf); + + output_dtd.part2.h_sync_off = h_sync_offset; + output_dtd.part2.h_sync_width = h_sync_len & 0xff; + output_dtd.part2.v_sync_off_width = (v_sync_offset & 0xf) << 4 | + (v_sync_len & 0xf); + output_dtd.part2.sync_off_width_high = ((h_sync_offset & 0x300) >> 2) | + ((h_sync_len & 0x300) >> 4) | ((v_sync_offset & 0x30) >> 2) | + ((v_sync_len & 0x30) >> 4); + + output_dtd.part2.dtd_flags = 0x18; + if (mode->flags & V_PHSYNC) + output_dtd.part2.dtd_flags |= 0x2; + if (mode->flags & V_PVSYNC) + output_dtd.part2.dtd_flags |= 0x4; + + output_dtd.part2.sdvo_flags = 0; + output_dtd.part2.v_sync_off_high = v_sync_offset & 0xc0; + output_dtd.part2.reserved = 0; + + /* Set the output timing to the screen */ + intel_sdvo_set_target_output(intel_output, sdvo_priv->active_outputs); + intel_sdvo_set_output_timing(intel_output, &output_dtd); + + /* Set the input timing to the screen. Assume always input 0. */ + intel_sdvo_set_target_input(intel_output, true, false); + + /* We would like to use i830_sdvo_create_preferred_input_timing() to + * provide the device with a timing it can support, if it supports that + * feature. However, presumably we would need to adjust the CRTC to + * output the preferred timing, and we don't support that currently. + */ +#if 0 + success = intel_sdvo_create_preferred_input_timing(intel_output, clock, + width, height); + if (success) { + struct intel_sdvo_dtd *input_dtd; + + intel_sdvo_get_preferred_input_timing(intel_output, &input_dtd); + intel_sdvo_set_input_timing(intel_output, &input_dtd); + } +#else + intel_sdvo_set_input_timing(intel_output, &output_dtd); +#endif + + switch (intel_sdvo_get_pixel_multiplier(mode)) { + case 1: + intel_sdvo_set_clock_rate_mult(intel_output, + SDVO_CLOCK_RATE_MULT_1X); + break; + case 2: + intel_sdvo_set_clock_rate_mult(intel_output, + SDVO_CLOCK_RATE_MULT_2X); + break; + case 4: + intel_sdvo_set_clock_rate_mult(intel_output, + SDVO_CLOCK_RATE_MULT_4X); + break; + } + + /* Set the SDVO control regs. */ + if (0/*IS_I965GM(dev)*/) { + sdvox = SDVO_BORDER_ENABLE; + } else { + sdvox = I915_READ(sdvo_priv->output_device); + switch (sdvo_priv->output_device) { + case SDVOB: + sdvox &= SDVOB_PRESERVE_MASK; + break; + case SDVOC: + sdvox &= SDVOC_PRESERVE_MASK; + break; + } + sdvox |= (9 << 19) | SDVO_BORDER_ENABLE; + } + if (intel_crtc->pipe == 1) + sdvox |= SDVO_PIPE_B_SELECT; + + sdvo_pixel_multiply = intel_sdvo_get_pixel_multiplier(mode); + if (IS_I965G(dev)) { + /* done in crtc_mode_set as the dpll_md reg must be written + early */ + } else if (IS_I945G(dev) || IS_I945GM(dev)) { + /* done in crtc_mode_set as it lives inside the + dpll register */ + } else { + sdvox |= (sdvo_pixel_multiply - 1) << SDVO_PORT_MULTIPLY_SHIFT; + } + + intel_sdvo_write_sdvox(intel_output, sdvox); +} + +static void intel_sdvo_dpms(struct drm_encoder *encoder, int mode) +{ + struct drm_device *dev = encoder->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_output *intel_output = enc_to_intel_output(encoder); + struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; + u32 temp; + + if (mode != DPMSModeOn) { + intel_sdvo_set_active_outputs(intel_output, 0); + if (0) + intel_sdvo_set_encoder_power_state(intel_output, mode); + + if (mode == DPMSModeOff) { + temp = I915_READ(sdvo_priv->output_device); + if ((temp & SDVO_ENABLE) != 0) { + intel_sdvo_write_sdvox(intel_output, temp & ~SDVO_ENABLE); + } + } + } else { + bool input1, input2; + int i; + u8 status; + + temp = I915_READ(sdvo_priv->output_device); + if ((temp & SDVO_ENABLE) == 0) + intel_sdvo_write_sdvox(intel_output, temp | SDVO_ENABLE); + for (i = 0; i < 2; i++) + intel_wait_for_vblank(dev); + + status = intel_sdvo_get_trained_inputs(intel_output, &input1, + &input2); + + + /* Warn if the device reported failure to sync. + * A lot of SDVO devices fail to notify of sync, but it's + * a given it the status is a success, we succeeded. + */ + if (status == SDVO_CMD_STATUS_SUCCESS && !input1) { + DRM_DEBUG("First %s output reported failure to sync\n", + SDVO_NAME(sdvo_priv)); + } + + if (0) + intel_sdvo_set_encoder_power_state(intel_output, mode); + intel_sdvo_set_active_outputs(intel_output, sdvo_priv->active_outputs); + } + return; +} + +static void intel_sdvo_save(struct drm_connector *connector) +{ + struct drm_device *dev = connector->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_output *intel_output = to_intel_output(connector); + struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; + int o; + + sdvo_priv->save_sdvo_mult = intel_sdvo_get_clock_rate_mult(intel_output); + intel_sdvo_get_active_outputs(intel_output, &sdvo_priv->save_active_outputs); + + if (sdvo_priv->caps.sdvo_inputs_mask & 0x1) { + intel_sdvo_set_target_input(intel_output, true, false); + intel_sdvo_get_input_timing(intel_output, + &sdvo_priv->save_input_dtd_1); + } + + if (sdvo_priv->caps.sdvo_inputs_mask & 0x2) { + intel_sdvo_set_target_input(intel_output, false, true); + intel_sdvo_get_input_timing(intel_output, + &sdvo_priv->save_input_dtd_2); + } + + for (o = SDVO_OUTPUT_FIRST; o <= SDVO_OUTPUT_LAST; o++) + { + u16 this_output = (1 << o); + if (sdvo_priv->caps.output_flags & this_output) + { + intel_sdvo_set_target_output(intel_output, this_output); + intel_sdvo_get_output_timing(intel_output, + &sdvo_priv->save_output_dtd[o]); + } + } + + sdvo_priv->save_SDVOX = I915_READ(sdvo_priv->output_device); +} + +static void intel_sdvo_restore(struct drm_connector *connector) +{ + struct drm_device *dev = connector->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_output *intel_output = to_intel_output(connector); + struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; + int o; + int i; + bool input1, input2; + u8 status; + + intel_sdvo_set_active_outputs(intel_output, 0); + + for (o = SDVO_OUTPUT_FIRST; o <= SDVO_OUTPUT_LAST; o++) + { + u16 this_output = (1 << o); + if (sdvo_priv->caps.output_flags & this_output) { + intel_sdvo_set_target_output(intel_output, this_output); + intel_sdvo_set_output_timing(intel_output, &sdvo_priv->save_output_dtd[o]); + } + } + + if (sdvo_priv->caps.sdvo_inputs_mask & 0x1) { + intel_sdvo_set_target_input(intel_output, true, false); + intel_sdvo_set_input_timing(intel_output, &sdvo_priv->save_input_dtd_1); + } + + if (sdvo_priv->caps.sdvo_inputs_mask & 0x2) { + intel_sdvo_set_target_input(intel_output, false, true); + intel_sdvo_set_input_timing(intel_output, &sdvo_priv->save_input_dtd_2); + } + + intel_sdvo_set_clock_rate_mult(intel_output, sdvo_priv->save_sdvo_mult); + + I915_WRITE(sdvo_priv->output_device, sdvo_priv->save_SDVOX); + + if (sdvo_priv->save_SDVOX & SDVO_ENABLE) + { + for (i = 0; i < 2; i++) + intel_wait_for_vblank(dev); + status = intel_sdvo_get_trained_inputs(intel_output, &input1, &input2); + if (status == SDVO_CMD_STATUS_SUCCESS && !input1) + DRM_DEBUG("First %s output reported failure to sync\n", + SDVO_NAME(sdvo_priv)); + } + + intel_sdvo_set_active_outputs(intel_output, sdvo_priv->save_active_outputs); +} + +static int intel_sdvo_mode_valid(struct drm_connector *connector, + struct drm_display_mode *mode) +{ + struct intel_output *intel_output = to_intel_output(connector); + struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; + + if (mode->flags & V_DBLSCAN) + return MODE_NO_DBLESCAN; + + if (sdvo_priv->pixel_clock_min > mode->clock) + return MODE_CLOCK_LOW; + + if (sdvo_priv->pixel_clock_max < mode->clock) + return MODE_CLOCK_HIGH; + + return MODE_OK; +} + +static bool intel_sdvo_get_capabilities(struct intel_output *intel_output, struct intel_sdvo_caps *caps) +{ + u8 status; + + intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_DEVICE_CAPS, NULL, 0); + status = intel_sdvo_read_response(intel_output, caps, sizeof(*caps)); + if (status != SDVO_CMD_STATUS_SUCCESS) + return false; + + return true; +} + +struct drm_connector* intel_sdvo_find(struct drm_device *dev, int sdvoB) +{ + struct drm_connector *connector = NULL; + struct intel_output *iout = NULL; + struct intel_sdvo_priv *sdvo; + + /* find the sdvo connector */ + list_for_each_entry(connector, &dev->mode_config.connector_list, head) { + iout = to_intel_output(connector); + + if (iout->type != INTEL_OUTPUT_SDVO) + continue; + + sdvo = iout->dev_priv; + + if (sdvo->output_device == SDVOB && sdvoB) + return connector; + + if (sdvo->output_device == SDVOC && !sdvoB) + return connector; + + } + + return NULL; +} + +int intel_sdvo_supports_hotplug(struct drm_connector *connector) +{ + u8 response[2]; + u8 status; + struct intel_output *intel_output; + DRM_DEBUG("\n"); + + if (!connector) + return 0; + + intel_output = to_intel_output(connector); + + intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_HOT_PLUG_SUPPORT, NULL, 0); + status = intel_sdvo_read_response(intel_output, &response, 2); + + if (response[0] !=0) + return 1; + + return 0; +} + +void intel_sdvo_set_hotplug(struct drm_connector *connector, int on) +{ + u8 response[2]; + u8 status; + struct intel_output *intel_output = to_intel_output(connector); + + intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_ACTIVE_HOT_PLUG, NULL, 0); + intel_sdvo_read_response(intel_output, &response, 2); + + if (on) { + intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_HOT_PLUG_SUPPORT, NULL, 0); + status = intel_sdvo_read_response(intel_output, &response, 2); + + intel_sdvo_write_cmd(intel_output, SDVO_CMD_SET_ACTIVE_HOT_PLUG, &response, 2); + } else { + response[0] = 0; + response[1] = 0; + intel_sdvo_write_cmd(intel_output, SDVO_CMD_SET_ACTIVE_HOT_PLUG, &response, 2); + } + + intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_ACTIVE_HOT_PLUG, NULL, 0); + intel_sdvo_read_response(intel_output, &response, 2); +} + +static enum drm_connector_status intel_sdvo_detect(struct drm_connector *connector) +{ + u8 response[2]; + u8 status; + struct intel_output *intel_output = to_intel_output(connector); + + intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_ATTACHED_DISPLAYS, NULL, 0); + status = intel_sdvo_read_response(intel_output, &response, 2); + + DRM_DEBUG("SDVO response %d %d\n", response[0], response[1]); + if ((response[0] != 0) || (response[1] != 0)) + return connector_status_connected; + else + return connector_status_disconnected; +} + +static int intel_sdvo_get_modes(struct drm_connector *connector) +{ + struct intel_output *intel_output = to_intel_output(connector); + + /* set the bus switch and get the modes */ + intel_sdvo_set_control_bus_switch(intel_output, SDVO_CONTROL_BUS_DDC2); + intel_ddc_get_modes(intel_output); + + if (list_empty(&connector->probed_modes)) + return 0; + return 1; +#if 0 + /* Mac mini hack. On this device, I get DDC through the analog, which + * load-detects as disconnected. I fail to DDC through the SDVO DDC, + * but it does load-detect as connected. So, just steal the DDC bits + * from analog when we fail at finding it the right way. + */ + /* TODO */ + return NULL; + + return NULL; +#endif +} + +static void intel_sdvo_destroy(struct drm_connector *connector) +{ + struct intel_output *intel_output = to_intel_output(connector); + + if (intel_output->i2c_bus) + intel_i2c_destroy(intel_output->i2c_bus); + drm_sysfs_connector_remove(connector); + drm_connector_cleanup(connector); + kfree(intel_output); +} + +static const struct drm_encoder_helper_funcs intel_sdvo_helper_funcs = { + .dpms = intel_sdvo_dpms, + .mode_fixup = intel_sdvo_mode_fixup, + .prepare = intel_encoder_prepare, + .mode_set = intel_sdvo_mode_set, + .commit = intel_encoder_commit, +}; + +static const struct drm_connector_funcs intel_sdvo_connector_funcs = { + .save = intel_sdvo_save, + .restore = intel_sdvo_restore, + .detect = intel_sdvo_detect, + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = intel_sdvo_destroy, +}; + +static const struct drm_connector_helper_funcs intel_sdvo_connector_helper_funcs = { + .get_modes = intel_sdvo_get_modes, + .mode_valid = intel_sdvo_mode_valid, + .best_encoder = intel_best_encoder, +}; + +void intel_sdvo_enc_destroy(struct drm_encoder *encoder) +{ + drm_encoder_cleanup(encoder); +} + +static const struct drm_encoder_funcs intel_sdvo_enc_funcs = { + .destroy = intel_sdvo_enc_destroy, +}; + + +void intel_sdvo_init(struct drm_device *dev, int output_device) +{ + struct drm_connector *connector; + struct intel_output *intel_output; + struct intel_sdvo_priv *sdvo_priv; + struct intel_i2c_chan *i2cbus = NULL; + int connector_type; + u8 ch[0x40]; + int i; + int encoder_type, output_id; + + intel_output = kcalloc(sizeof(struct intel_output)+sizeof(struct intel_sdvo_priv), 1, GFP_KERNEL); + if (!intel_output) { + return; + } + + connector = &intel_output->base; + + drm_connector_init(dev, connector, &intel_sdvo_connector_funcs, + DRM_MODE_CONNECTOR_Unknown); + drm_connector_helper_add(connector, &intel_sdvo_connector_helper_funcs); + sdvo_priv = (struct intel_sdvo_priv *)(intel_output + 1); + intel_output->type = INTEL_OUTPUT_SDVO; + + connector->interlace_allowed = 0; + connector->doublescan_allowed = 0; + + /* setup the DDC bus. */ + if (output_device == SDVOB) + i2cbus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOB"); + else + i2cbus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOC"); + + if (!i2cbus) + goto err_connector; + + sdvo_priv->i2c_bus = i2cbus; + + if (output_device == SDVOB) { + output_id = 1; + sdvo_priv->i2c_bus->slave_addr = 0x38; + } else { + output_id = 2; + sdvo_priv->i2c_bus->slave_addr = 0x39; + } + + sdvo_priv->output_device = output_device; + intel_output->i2c_bus = i2cbus; + intel_output->dev_priv = sdvo_priv; + + + /* Read the regs to test if we can talk to the device */ + for (i = 0; i < 0x40; i++) { + if (!intel_sdvo_read_byte(intel_output, i, &ch[i])) { + DRM_DEBUG("No SDVO device found on SDVO%c\n", + output_device == SDVOB ? 'B' : 'C'); + goto err_i2c; + } + } + + intel_sdvo_get_capabilities(intel_output, &sdvo_priv->caps); + + memset(&sdvo_priv->active_outputs, 0, sizeof(sdvo_priv->active_outputs)); + + /* TODO, CVBS, SVID, YPRPB & SCART outputs. */ + if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_RGB0) + { + sdvo_priv->active_outputs = SDVO_OUTPUT_RGB0; + connector->display_info.subpixel_order = SubPixelHorizontalRGB; + encoder_type = DRM_MODE_ENCODER_DAC; + connector_type = DRM_MODE_CONNECTOR_VGA; + } + else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_RGB1) + { + sdvo_priv->active_outputs = SDVO_OUTPUT_RGB1; + connector->display_info.subpixel_order = SubPixelHorizontalRGB; + encoder_type = DRM_MODE_ENCODER_DAC; + connector_type = DRM_MODE_CONNECTOR_VGA; + } + else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_TMDS0) + { + sdvo_priv->active_outputs = SDVO_OUTPUT_TMDS0; + connector->display_info.subpixel_order = SubPixelHorizontalRGB; + encoder_type = DRM_MODE_ENCODER_TMDS; + connector_type = DRM_MODE_CONNECTOR_DVID; + } + else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_TMDS1) + { + sdvo_priv->active_outputs = SDVO_OUTPUT_TMDS1; + connector->display_info.subpixel_order = SubPixelHorizontalRGB; + encoder_type = DRM_MODE_ENCODER_TMDS; + connector_type = DRM_MODE_CONNECTOR_DVID; + } + else + { + unsigned char bytes[2]; + + memcpy (bytes, &sdvo_priv->caps.output_flags, 2); + DRM_DEBUG("%s: No active RGB or TMDS outputs (0x%02x%02x)\n", + SDVO_NAME(sdvo_priv), + bytes[0], bytes[1]); + goto err_i2c; + } + + drm_encoder_init(dev, &intel_output->enc, &intel_sdvo_enc_funcs, encoder_type); + drm_encoder_helper_add(&intel_output->enc, &intel_sdvo_helper_funcs); + connector->connector_type = connector_type; + + drm_mode_connector_attach_encoder(&intel_output->base, &intel_output->enc); + drm_sysfs_connector_add(connector); + + /* Set the input timing to the screen. Assume always input 0. */ + intel_sdvo_set_target_input(intel_output, true, false); + + intel_sdvo_get_input_pixel_clock_range(intel_output, + &sdvo_priv->pixel_clock_min, + &sdvo_priv->pixel_clock_max); + + + DRM_DEBUG("%s device VID/DID: %02X:%02X.%02X, " + "clock range %dMHz - %dMHz, " + "input 1: %c, input 2: %c, " + "output 1: %c, output 2: %c\n", + SDVO_NAME(sdvo_priv), + sdvo_priv->caps.vendor_id, sdvo_priv->caps.device_id, + sdvo_priv->caps.device_rev_id, + sdvo_priv->pixel_clock_min / 1000, + sdvo_priv->pixel_clock_max / 1000, + (sdvo_priv->caps.sdvo_inputs_mask & 0x1) ? 'Y' : 'N', + (sdvo_priv->caps.sdvo_inputs_mask & 0x2) ? 'Y' : 'N', + /* check currently supported outputs */ + sdvo_priv->caps.output_flags & + (SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_RGB0) ? 'Y' : 'N', + sdvo_priv->caps.output_flags & + (SDVO_OUTPUT_TMDS1 | SDVO_OUTPUT_RGB1) ? 'Y' : 'N'); + + intel_output->ddc_bus = i2cbus; + + return; + +err_i2c: + intel_i2c_destroy(intel_output->i2c_bus); +err_connector: + drm_connector_cleanup(connector); + kfree(intel_output); + + return; +} diff --git a/linux-core/intel_sdvo_regs.h b/linux-core/intel_sdvo_regs.h new file mode 100644 index 00000000..a9d16711 --- /dev/null +++ b/linux-core/intel_sdvo_regs.h @@ -0,0 +1,328 @@ +/* + * Copyright © 2006-2007 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Authors: + * Eric Anholt <eric@anholt.net> + */ + +/** + * @file SDVO command definitions and structures. + */ + +#define SDVO_OUTPUT_FIRST (0) +#define SDVO_OUTPUT_TMDS0 (1 << 0) +#define SDVO_OUTPUT_RGB0 (1 << 1) +#define SDVO_OUTPUT_CVBS0 (1 << 2) +#define SDVO_OUTPUT_SVID0 (1 << 3) +#define SDVO_OUTPUT_YPRPB0 (1 << 4) +#define SDVO_OUTPUT_SCART0 (1 << 5) +#define SDVO_OUTPUT_LVDS0 (1 << 6) +#define SDVO_OUTPUT_TMDS1 (1 << 8) +#define SDVO_OUTPUT_RGB1 (1 << 9) +#define SDVO_OUTPUT_CVBS1 (1 << 10) +#define SDVO_OUTPUT_SVID1 (1 << 11) +#define SDVO_OUTPUT_YPRPB1 (1 << 12) +#define SDVO_OUTPUT_SCART1 (1 << 13) +#define SDVO_OUTPUT_LVDS1 (1 << 14) +#define SDVO_OUTPUT_LAST (14) + +struct intel_sdvo_caps { + u8 vendor_id; + u8 device_id; + u8 device_rev_id; + u8 sdvo_version_major; + u8 sdvo_version_minor; + unsigned int sdvo_inputs_mask:2; + unsigned int smooth_scaling:1; + unsigned int sharp_scaling:1; + unsigned int up_scaling:1; + unsigned int down_scaling:1; + unsigned int stall_support:1; + unsigned int pad:1; + u16 output_flags; +} __attribute__((packed)); + +/** This matches the EDID DTD structure, more or less */ +struct intel_sdvo_dtd { + struct { + u16 clock; /**< pixel clock, in 10kHz units */ + u8 h_active; /**< lower 8 bits (pixels) */ + u8 h_blank; /**< lower 8 bits (pixels) */ + u8 h_high; /**< upper 4 bits each h_active, h_blank */ + u8 v_active; /**< lower 8 bits (lines) */ + u8 v_blank; /**< lower 8 bits (lines) */ + u8 v_high; /**< upper 4 bits each v_active, v_blank */ + } part1; + + struct { + u8 h_sync_off; /**< lower 8 bits, from hblank start */ + u8 h_sync_width; /**< lower 8 bits (pixels) */ + /** lower 4 bits each vsync offset, vsync width */ + u8 v_sync_off_width; + /** + * 2 high bits of hsync offset, 2 high bits of hsync width, + * bits 4-5 of vsync offset, and 2 high bits of vsync width. + */ + u8 sync_off_width_high; + u8 dtd_flags; + u8 sdvo_flags; + /** bits 6-7 of vsync offset at bits 6-7 */ + u8 v_sync_off_high; + u8 reserved; + } part2; +} __attribute__((packed)); + +struct intel_sdvo_pixel_clock_range { + u16 min; /**< pixel clock, in 10kHz units */ + u16 max; /**< pixel clock, in 10kHz units */ +} __attribute__((packed)); + +struct intel_sdvo_preferred_input_timing_args { + u16 clock; + u16 width; + u16 height; +} __attribute__((packed)); + +/* I2C registers for SDVO */ +#define SDVO_I2C_ARG_0 0x07 +#define SDVO_I2C_ARG_1 0x06 +#define SDVO_I2C_ARG_2 0x05 +#define SDVO_I2C_ARG_3 0x04 +#define SDVO_I2C_ARG_4 0x03 +#define SDVO_I2C_ARG_5 0x02 +#define SDVO_I2C_ARG_6 0x01 +#define SDVO_I2C_ARG_7 0x00 +#define SDVO_I2C_OPCODE 0x08 +#define SDVO_I2C_CMD_STATUS 0x09 +#define SDVO_I2C_RETURN_0 0x0a +#define SDVO_I2C_RETURN_1 0x0b +#define SDVO_I2C_RETURN_2 0x0c +#define SDVO_I2C_RETURN_3 0x0d +#define SDVO_I2C_RETURN_4 0x0e +#define SDVO_I2C_RETURN_5 0x0f +#define SDVO_I2C_RETURN_6 0x10 +#define SDVO_I2C_RETURN_7 0x11 +#define SDVO_I2C_VENDOR_BEGIN 0x20 + +/* Status results */ +#define SDVO_CMD_STATUS_POWER_ON 0x0 +#define SDVO_CMD_STATUS_SUCCESS 0x1 +#define SDVO_CMD_STATUS_NOTSUPP 0x2 +#define SDVO_CMD_STATUS_INVALID_ARG 0x3 +#define SDVO_CMD_STATUS_PENDING 0x4 +#define SDVO_CMD_STATUS_TARGET_NOT_SPECIFIED 0x5 +#define SDVO_CMD_STATUS_SCALING_NOT_SUPP 0x6 + +/* SDVO commands, argument/result registers */ + +#define SDVO_CMD_RESET 0x01 + +/** Returns a struct intel_sdvo_caps */ +#define SDVO_CMD_GET_DEVICE_CAPS 0x02 + +#define SDVO_CMD_GET_FIRMWARE_REV 0x86 +# define SDVO_DEVICE_FIRMWARE_MINOR SDVO_I2C_RETURN_0 +# define SDVO_DEVICE_FIRMWARE_MAJOR SDVO_I2C_RETURN_1 +# define SDVO_DEVICE_FIRMWARE_PATCH SDVO_I2C_RETURN_2 + +/** + * Reports which inputs are trained (managed to sync). + * + * Devices must have trained within 2 vsyncs of a mode change. + */ +#define SDVO_CMD_GET_TRAINED_INPUTS 0x03 +struct intel_sdvo_get_trained_inputs_response { + unsigned int input0_trained:1; + unsigned int input1_trained:1; + unsigned int pad:6; +} __attribute__((packed)); + +/** Returns a struct intel_sdvo_output_flags of active outputs. */ +#define SDVO_CMD_GET_ACTIVE_OUTPUTS 0x04 + +/** + * Sets the current set of active outputs. + * + * Takes a struct intel_sdvo_output_flags. Must be preceded by a SET_IN_OUT_MAP + * on multi-output devices. + */ +#define SDVO_CMD_SET_ACTIVE_OUTPUTS 0x05 + +/** + * Returns the current mapping of SDVO inputs to outputs on the device. + * + * Returns two struct intel_sdvo_output_flags structures. + */ +#define SDVO_CMD_GET_IN_OUT_MAP 0x06 + +/** + * Sets the current mapping of SDVO inputs to outputs on the device. + * + * Takes two struct i380_sdvo_output_flags structures. + */ +#define SDVO_CMD_SET_IN_OUT_MAP 0x07 + +/** + * Returns a struct intel_sdvo_output_flags of attached displays. + */ +#define SDVO_CMD_GET_ATTACHED_DISPLAYS 0x0b + +/** + * Returns a struct intel_sdvo_ouptut_flags of displays supporting hot plugging. + */ +#define SDVO_CMD_GET_HOT_PLUG_SUPPORT 0x0c + +/** + * Takes a struct intel_sdvo_output_flags. + */ +#define SDVO_CMD_SET_ACTIVE_HOT_PLUG 0x0d + +/** + * Returns a struct intel_sdvo_output_flags of displays with hot plug + * interrupts enabled. + */ +#define SDVO_CMD_GET_ACTIVE_HOT_PLUG 0x0e + +#define SDVO_CMD_GET_INTERRUPT_EVENT_SOURCE 0x0f +struct intel_sdvo_get_interrupt_event_source_response { + u16 interrupt_status; + unsigned int ambient_light_interrupt:1; + unsigned int pad:7; +} __attribute__((packed)); + +/** + * Selects which input is affected by future input commands. + * + * Commands affected include SET_INPUT_TIMINGS_PART[12], + * GET_INPUT_TIMINGS_PART[12], GET_PREFERRED_INPUT_TIMINGS_PART[12], + * GET_INPUT_PIXEL_CLOCK_RANGE, and CREATE_PREFERRED_INPUT_TIMINGS. + */ +#define SDVO_CMD_SET_TARGET_INPUT 0x10 +struct intel_sdvo_set_target_input_args { + unsigned int target_1:1; + unsigned int pad:7; +} __attribute__((packed)); + +/** + * Takes a struct intel_sdvo_output_flags of which outputs are targetted by + * future output commands. + * + * Affected commands inclue SET_OUTPUT_TIMINGS_PART[12], + * GET_OUTPUT_TIMINGS_PART[12], and GET_OUTPUT_PIXEL_CLOCK_RANGE. + */ +#define SDVO_CMD_SET_TARGET_OUTPUT 0x11 + +#define SDVO_CMD_GET_INPUT_TIMINGS_PART1 0x12 +#define SDVO_CMD_GET_INPUT_TIMINGS_PART2 0x13 +#define SDVO_CMD_SET_INPUT_TIMINGS_PART1 0x14 +#define SDVO_CMD_SET_INPUT_TIMINGS_PART2 0x15 +#define SDVO_CMD_SET_OUTPUT_TIMINGS_PART1 0x16 +#define SDVO_CMD_SET_OUTPUT_TIMINGS_PART2 0x17 +#define SDVO_CMD_GET_OUTPUT_TIMINGS_PART1 0x18 +#define SDVO_CMD_GET_OUTPUT_TIMINGS_PART2 0x19 +/* Part 1 */ +# define SDVO_DTD_CLOCK_LOW SDVO_I2C_ARG_0 +# define SDVO_DTD_CLOCK_HIGH SDVO_I2C_ARG_1 +# define SDVO_DTD_H_ACTIVE SDVO_I2C_ARG_2 +# define SDVO_DTD_H_BLANK SDVO_I2C_ARG_3 +# define SDVO_DTD_H_HIGH SDVO_I2C_ARG_4 +# define SDVO_DTD_V_ACTIVE SDVO_I2C_ARG_5 +# define SDVO_DTD_V_BLANK SDVO_I2C_ARG_6 +# define SDVO_DTD_V_HIGH SDVO_I2C_ARG_7 +/* Part 2 */ +# define SDVO_DTD_HSYNC_OFF SDVO_I2C_ARG_0 +# define SDVO_DTD_HSYNC_WIDTH SDVO_I2C_ARG_1 +# define SDVO_DTD_VSYNC_OFF_WIDTH SDVO_I2C_ARG_2 +# define SDVO_DTD_SYNC_OFF_WIDTH_HIGH SDVO_I2C_ARG_3 +# define SDVO_DTD_DTD_FLAGS SDVO_I2C_ARG_4 +# define SDVO_DTD_DTD_FLAG_INTERLACED (1 << 7) +# define SDVO_DTD_DTD_FLAG_STEREO_MASK (3 << 5) +# define SDVO_DTD_DTD_FLAG_INPUT_MASK (3 << 3) +# define SDVO_DTD_DTD_FLAG_SYNC_MASK (3 << 1) +# define SDVO_DTD_SDVO_FLAS SDVO_I2C_ARG_5 +# define SDVO_DTD_SDVO_FLAG_STALL (1 << 7) +# define SDVO_DTD_SDVO_FLAG_CENTERED (0 << 6) +# define SDVO_DTD_SDVO_FLAG_UPPER_LEFT (1 << 6) +# define SDVO_DTD_SDVO_FLAG_SCALING_MASK (3 << 4) +# define SDVO_DTD_SDVO_FLAG_SCALING_NONE (0 << 4) +# define SDVO_DTD_SDVO_FLAG_SCALING_SHARP (1 << 4) +# define SDVO_DTD_SDVO_FLAG_SCALING_SMOOTH (2 << 4) +# define SDVO_DTD_VSYNC_OFF_HIGH SDVO_I2C_ARG_6 + +/** + * Generates a DTD based on the given width, height, and flags. + * + * This will be supported by any device supporting scaling or interlaced + * modes. + */ +#define SDVO_CMD_CREATE_PREFERRED_INPUT_TIMING 0x1a +# define SDVO_PREFERRED_INPUT_TIMING_CLOCK_LOW SDVO_I2C_ARG_0 +# define SDVO_PREFERRED_INPUT_TIMING_CLOCK_HIGH SDVO_I2C_ARG_1 +# define SDVO_PREFERRED_INPUT_TIMING_WIDTH_LOW SDVO_I2C_ARG_2 +# define SDVO_PREFERRED_INPUT_TIMING_WIDTH_HIGH SDVO_I2C_ARG_3 +# define SDVO_PREFERRED_INPUT_TIMING_HEIGHT_LOW SDVO_I2C_ARG_4 +# define SDVO_PREFERRED_INPUT_TIMING_HEIGHT_HIGH SDVO_I2C_ARG_5 +# define SDVO_PREFERRED_INPUT_TIMING_FLAGS SDVO_I2C_ARG_6 +# define SDVO_PREFERRED_INPUT_TIMING_FLAGS_INTERLACED (1 << 0) +# define SDVO_PREFERRED_INPUT_TIMING_FLAGS_SCALED (1 << 1) + +#define SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART1 0x1b +#define SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART2 0x1c + +/** Returns a struct intel_sdvo_pixel_clock_range */ +#define SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE 0x1d +/** Returns a struct intel_sdvo_pixel_clock_range */ +#define SDVO_CMD_GET_OUTPUT_PIXEL_CLOCK_RANGE 0x1e + +/** Returns a byte bitfield containing SDVO_CLOCK_RATE_MULT_* flags */ +#define SDVO_CMD_GET_SUPPORTED_CLOCK_RATE_MULTS 0x1f + +/** Returns a byte containing a SDVO_CLOCK_RATE_MULT_* flag */ +#define SDVO_CMD_GET_CLOCK_RATE_MULT 0x20 +/** Takes a byte containing a SDVO_CLOCK_RATE_MULT_* flag */ +#define SDVO_CMD_SET_CLOCK_RATE_MULT 0x21 +# define SDVO_CLOCK_RATE_MULT_1X (1 << 0) +# define SDVO_CLOCK_RATE_MULT_2X (1 << 1) +# define SDVO_CLOCK_RATE_MULT_4X (1 << 3) + +#define SDVO_CMD_GET_SUPPORTED_TV_FORMATS 0x27 + +#define SDVO_CMD_GET_TV_FORMAT 0x28 + +#define SDVO_CMD_SET_TV_FORMAT 0x29 + +#define SDVO_CMD_GET_SUPPORTED_POWER_STATES 0x2a +#define SDVO_CMD_GET_ENCODER_POWER_STATE 0x2b +#define SDVO_CMD_SET_ENCODER_POWER_STATE 0x2c +# define SDVO_ENCODER_STATE_ON (1 << 0) +# define SDVO_ENCODER_STATE_STANDBY (1 << 1) +# define SDVO_ENCODER_STATE_SUSPEND (1 << 2) +# define SDVO_ENCODER_STATE_OFF (1 << 3) + +#define SDVO_CMD_SET_TV_RESOLUTION_SUPPORT 0x93 + +#define SDVO_CMD_SET_CONTROL_BUS_SWITCH 0x7a +# define SDVO_CONTROL_BUS_PROM 0x0 +# define SDVO_CONTROL_BUS_DDC1 0x1 +# define SDVO_CONTROL_BUS_DDC2 0x2 +# define SDVO_CONTROL_BUS_DDC3 0x3 + diff --git a/linux-core/intel_tv.c b/linux-core/intel_tv.c new file mode 100644 index 00000000..39f33d6c --- /dev/null +++ b/linux-core/intel_tv.c @@ -0,0 +1,1734 @@ +/* + * Copyright © 2006 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Authors: + * Eric Anholt <eric@anholt.net> + * + */ + +/** @file + * Integrated TV-out support for the 915GM and 945GM. + */ + +#include "drmP.h" +#include "drm.h" +#include "drm_crtc.h" +#include "drm_edid.h" +#include "intel_drv.h" +#include "i915_drm.h" +#include "i915_drv.h" + +enum tv_margin { + TV_MARGIN_LEFT, TV_MARGIN_TOP, + TV_MARGIN_RIGHT, TV_MARGIN_BOTTOM +}; + +/** Private structure for the integrated TV support */ +struct intel_tv_priv { + int type; + char *tv_format; + int margin[4]; + u32 save_TV_H_CTL_1; + u32 save_TV_H_CTL_2; + u32 save_TV_H_CTL_3; + u32 save_TV_V_CTL_1; + u32 save_TV_V_CTL_2; + u32 save_TV_V_CTL_3; + u32 save_TV_V_CTL_4; + u32 save_TV_V_CTL_5; + u32 save_TV_V_CTL_6; + u32 save_TV_V_CTL_7; + u32 save_TV_SC_CTL_1, save_TV_SC_CTL_2, save_TV_SC_CTL_3; + + u32 save_TV_CSC_Y; + u32 save_TV_CSC_Y2; + u32 save_TV_CSC_U; + u32 save_TV_CSC_U2; + u32 save_TV_CSC_V; + u32 save_TV_CSC_V2; + u32 save_TV_CLR_KNOBS; + u32 save_TV_CLR_LEVEL; + u32 save_TV_WIN_POS; + u32 save_TV_WIN_SIZE; + u32 save_TV_FILTER_CTL_1; + u32 save_TV_FILTER_CTL_2; + u32 save_TV_FILTER_CTL_3; + + u32 save_TV_H_LUMA[60]; + u32 save_TV_H_CHROMA[60]; + u32 save_TV_V_LUMA[43]; + u32 save_TV_V_CHROMA[43]; + + u32 save_TV_DAC; + u32 save_TV_CTL; +}; + +struct video_levels { + int blank, black, burst; +}; + +struct color_conversion { + u16 ry, gy, by, ay; + u16 ru, gu, bu, au; + u16 rv, gv, bv, av; +}; + +static const u32 filter_table[] = { + 0xB1403000, 0x2E203500, 0x35002E20, 0x3000B140, + 0x35A0B160, 0x2DC02E80, 0xB1403480, 0xB1603000, + 0x2EA03640, 0x34002D80, 0x3000B120, 0x36E0B160, + 0x2D202EF0, 0xB1203380, 0xB1603000, 0x2F303780, + 0x33002CC0, 0x3000B100, 0x3820B160, 0x2C802F50, + 0xB10032A0, 0xB1603000, 0x2F9038C0, 0x32202C20, + 0x3000B0E0, 0x3980B160, 0x2BC02FC0, 0xB0E031C0, + 0xB1603000, 0x2FF03A20, 0x31602B60, 0xB020B0C0, + 0x3AE0B160, 0x2B001810, 0xB0C03120, 0xB140B020, + 0x18283BA0, 0x30C02A80, 0xB020B0A0, 0x3C60B140, + 0x2A201838, 0xB0A03080, 0xB120B020, 0x18383D20, + 0x304029C0, 0xB040B080, 0x3DE0B100, 0x29601848, + 0xB0803000, 0xB100B040, 0x18483EC0, 0xB0402900, + 0xB040B060, 0x3F80B0C0, 0x28801858, 0xB060B080, + 0xB0A0B060, 0x18602820, 0xB0A02820, 0x0000B060, + 0xB1403000, 0x2E203500, 0x35002E20, 0x3000B140, + 0x35A0B160, 0x2DC02E80, 0xB1403480, 0xB1603000, + 0x2EA03640, 0x34002D80, 0x3000B120, 0x36E0B160, + 0x2D202EF0, 0xB1203380, 0xB1603000, 0x2F303780, + 0x33002CC0, 0x3000B100, 0x3820B160, 0x2C802F50, + 0xB10032A0, 0xB1603000, 0x2F9038C0, 0x32202C20, + 0x3000B0E0, 0x3980B160, 0x2BC02FC0, 0xB0E031C0, + 0xB1603000, 0x2FF03A20, 0x31602B60, 0xB020B0C0, + 0x3AE0B160, 0x2B001810, 0xB0C03120, 0xB140B020, + 0x18283BA0, 0x30C02A80, 0xB020B0A0, 0x3C60B140, + 0x2A201838, 0xB0A03080, 0xB120B020, 0x18383D20, + 0x304029C0, 0xB040B080, 0x3DE0B100, 0x29601848, + 0xB0803000, 0xB100B040, 0x18483EC0, 0xB0402900, + 0xB040B060, 0x3F80B0C0, 0x28801858, 0xB060B080, + 0xB0A0B060, 0x18602820, 0xB0A02820, 0x0000B060, + 0x36403000, 0x2D002CC0, 0x30003640, 0x2D0036C0, + 0x35C02CC0, 0x37403000, 0x2C802D40, 0x30003540, + 0x2D8037C0, 0x34C02C40, 0x38403000, 0x2BC02E00, + 0x30003440, 0x2E2038C0, 0x34002B80, 0x39803000, + 0x2B402E40, 0x30003380, 0x2E603A00, 0x33402B00, + 0x3A803040, 0x2A802EA0, 0x30403300, 0x2EC03B40, + 0x32802A40, 0x3C003040, 0x2A002EC0, 0x30803240, + 0x2EC03C80, 0x320029C0, 0x3D403080, 0x29402F00, + 0x308031C0, 0x2F203DC0, 0x31802900, 0x3E8030C0, + 0x28802F40, 0x30C03140, 0x2F203F40, 0x31402840, + 0x28003100, 0x28002F00, 0x00003100, 0x36403000, + 0x2D002CC0, 0x30003640, 0x2D0036C0, + 0x35C02CC0, 0x37403000, 0x2C802D40, 0x30003540, + 0x2D8037C0, 0x34C02C40, 0x38403000, 0x2BC02E00, + 0x30003440, 0x2E2038C0, 0x34002B80, 0x39803000, + 0x2B402E40, 0x30003380, 0x2E603A00, 0x33402B00, + 0x3A803040, 0x2A802EA0, 0x30403300, 0x2EC03B40, + 0x32802A40, 0x3C003040, 0x2A002EC0, 0x30803240, + 0x2EC03C80, 0x320029C0, 0x3D403080, 0x29402F00, + 0x308031C0, 0x2F203DC0, 0x31802900, 0x3E8030C0, + 0x28802F40, 0x30C03140, 0x2F203F40, 0x31402840, + 0x28003100, 0x28002F00, 0x00003100, +}; + +/* + * Color conversion values have 3 separate fixed point formats: + * + * 10 bit fields (ay, au) + * 1.9 fixed point (b.bbbbbbbbb) + * 11 bit fields (ry, by, ru, gu, gv) + * exp.mantissa (ee.mmmmmmmmm) + * ee = 00 = 10^-1 (0.mmmmmmmmm) + * ee = 01 = 10^-2 (0.0mmmmmmmmm) + * ee = 10 = 10^-3 (0.00mmmmmmmmm) + * ee = 11 = 10^-4 (0.000mmmmmmmmm) + * 12 bit fields (gy, rv, bu) + * exp.mantissa (eee.mmmmmmmmm) + * eee = 000 = 10^-1 (0.mmmmmmmmm) + * eee = 001 = 10^-2 (0.0mmmmmmmmm) + * eee = 010 = 10^-3 (0.00mmmmmmmmm) + * eee = 011 = 10^-4 (0.000mmmmmmmmm) + * eee = 100 = reserved + * eee = 101 = reserved + * eee = 110 = reserved + * eee = 111 = 10^0 (m.mmmmmmmm) (only usable for 1.0 representation) + * + * Saturation and contrast are 8 bits, with their own representation: + * 8 bit field (saturation, contrast) + * exp.mantissa (ee.mmmmmm) + * ee = 00 = 10^-1 (0.mmmmmm) + * ee = 01 = 10^0 (m.mmmmm) + * ee = 10 = 10^1 (mm.mmmm) + * ee = 11 = 10^2 (mmm.mmm) + * + * Simple conversion function: + * + * static u32 + * float_to_csc_11(float f) + * { + * u32 exp; + * u32 mant; + * u32 ret; + * + * if (f < 0) + * f = -f; + * + * if (f >= 1) { + * exp = 0x7; + * mant = 1 << 8; + * } else { + * for (exp = 0; exp < 3 && f < 0.5; exp++) + * f *= 2.0; + * mant = (f * (1 << 9) + 0.5); + * if (mant >= (1 << 9)) + * mant = (1 << 9) - 1; + * } + * ret = (exp << 9) | mant; + * return ret; + * } + */ + +/* + * Behold, magic numbers! If we plant them they might grow a big + * s-video cable to the sky... or something. + * + * Pre-converted to appropriate hex value. + */ + +/* + * PAL & NTSC values for composite & s-video connections + */ +static const struct color_conversion ntsc_m_csc_composite = { + .ry = 0x0332, .gy = 0x012d, .by = 0x07d3, .ay = 0x0104, + .ru = 0x0733, .gu = 0x052d, .bu = 0x05c7, .au = 0x0f00, + .rv = 0x0340, .gv = 0x030c, .bv = 0x06d0, .av = 0x0f00, +}; + +static const struct video_levels ntsc_m_levels_composite = { + .blank = 225, .black = 267, .burst = 113, +}; + +static const struct color_conversion ntsc_m_csc_svideo = { + .ry = 0x0332, .gy = 0x012d, .by = 0x07d3, .ay = 0x0134, + .ru = 0x076a, .gu = 0x0564, .bu = 0x030d, .au = 0x0f00, + .rv = 0x037a, .gv = 0x033d, .bv = 0x06f6, .av = 0x0f00, +}; + +static const struct video_levels ntsc_m_levels_svideo = { + .blank = 266, .black = 316, .burst = 133, +}; + +static const struct color_conversion ntsc_j_csc_composite = { + .ry = 0x0332, .gy = 0x012d, .by = 0x07d3, .ay = 0x0119, + .ru = 0x074c, .gu = 0x0546, .bu = 0x05ec, .au = 0x0f00, + .rv = 0x035a, .gv = 0x0322, .bv = 0x06e1, .av = 0x0f00, +}; + +static const struct video_levels ntsc_j_levels_composite = { + .blank = 225, .black = 225, .burst = 113, +}; + +static const struct color_conversion ntsc_j_csc_svideo = { + .ry = 0x0332, .gy = 0x012d, .by = 0x07d3, .ay = 0x014c, + .ru = 0x0788, .gu = 0x0581, .bu = 0x0322, .au = 0x0f00, + .rv = 0x0399, .gv = 0x0356, .bv = 0x070a, .av = 0x0f00, +}; + +static const struct video_levels ntsc_j_levels_svideo = { + .blank = 266, .black = 266, .burst = 133, +}; + +static const struct color_conversion pal_csc_composite = { + .ry = 0x0332, .gy = 0x012d, .by = 0x07d3, .ay = 0x0113, + .ru = 0x0745, .gu = 0x053f, .bu = 0x05e1, .au = 0x0f00, + .rv = 0x0353, .gv = 0x031c, .bv = 0x06dc, .av = 0x0f00, +}; + +static const struct video_levels pal_levels_composite = { + .blank = 237, .black = 237, .burst = 118, +}; + +static const struct color_conversion pal_csc_svideo = { + .ry = 0x0332, .gy = 0x012d, .by = 0x07d3, .ay = 0x0145, + .ru = 0x0780, .gu = 0x0579, .bu = 0x031c, .au = 0x0f00, + .rv = 0x0390, .gv = 0x034f, .bv = 0x0705, .av = 0x0f00, +}; + +static const struct video_levels pal_levels_svideo = { + .blank = 280, .black = 280, .burst = 139, +}; + +static const struct color_conversion pal_m_csc_composite = { + .ry = 0x0332, .gy = 0x012d, .by = 0x07d3, .ay = 0x0104, + .ru = 0x0733, .gu = 0x052d, .bu = 0x05c7, .au = 0x0f00, + .rv = 0x0340, .gv = 0x030c, .bv = 0x06d0, .av = 0x0f00, +}; + +static const struct video_levels pal_m_levels_composite = { + .blank = 225, .black = 267, .burst = 113, +}; + +static const struct color_conversion pal_m_csc_svideo = { + .ry = 0x0332, .gy = 0x012d, .by = 0x07d3, .ay = 0x0134, + .ru = 0x076a, .gu = 0x0564, .bu = 0x030d, .au = 0x0f00, + .rv = 0x037a, .gv = 0x033d, .bv = 0x06f6, .av = 0x0f00, +}; + +static const struct video_levels pal_m_levels_svideo = { + .blank = 266, .black = 316, .burst = 133, +}; + +static const struct color_conversion pal_n_csc_composite = { + .ry = 0x0332, .gy = 0x012d, .by = 0x07d3, .ay = 0x0104, + .ru = 0x0733, .gu = 0x052d, .bu = 0x05c7, .au = 0x0f00, + .rv = 0x0340, .gv = 0x030c, .bv = 0x06d0, .av = 0x0f00, +}; + +static const struct video_levels pal_n_levels_composite = { + .blank = 225, .black = 267, .burst = 118, +}; + +static const struct color_conversion pal_n_csc_svideo = { + .ry = 0x0332, .gy = 0x012d, .by = 0x07d3, .ay = 0x0134, + .ru = 0x076a, .gu = 0x0564, .bu = 0x030d, .au = 0x0f00, + .rv = 0x037a, .gv = 0x033d, .bv = 0x06f6, .av = 0x0f00, +}; + +static const struct video_levels pal_n_levels_svideo = { + .blank = 266, .black = 316, .burst = 139, +}; + +/* + * Component connections + */ +static const struct color_conversion sdtv_csc_yprpb = { + .ry = 0x0332, .gy = 0x012d, .by = 0x07d3, .ay = 0x0146, + .ru = 0x0559, .gu = 0x0353, .bu = 0x0100, .au = 0x0f00, + .rv = 0x0100, .gv = 0x03ad, .bv = 0x074d, .av = 0x0f00, +}; + +static const struct color_conversion sdtv_csc_rgb = { + .ry = 0x0000, .gy = 0x0f00, .by = 0x0000, .ay = 0x0166, + .ru = 0x0000, .gu = 0x0000, .bu = 0x0f00, .au = 0x0166, + .rv = 0x0f00, .gv = 0x0000, .bv = 0x0000, .av = 0x0166, +}; + +static const struct color_conversion hdtv_csc_yprpb = { + .ry = 0x05b3, .gy = 0x016e, .by = 0x0728, .ay = 0x0146, + .ru = 0x07d5, .gu = 0x038b, .bu = 0x0100, .au = 0x0f00, + .rv = 0x0100, .gv = 0x03d1, .bv = 0x06bc, .av = 0x0f00, +}; + +static const struct color_conversion hdtv_csc_rgb = { + .ry = 0x0000, .gy = 0x0f00, .by = 0x0000, .ay = 0x0166, + .ru = 0x0000, .gu = 0x0000, .bu = 0x0f00, .au = 0x0166, + .rv = 0x0f00, .gv = 0x0000, .bv = 0x0000, .av = 0x0166, +}; + +static const struct video_levels component_levels = { + .blank = 279, .black = 279, .burst = 0, +}; + + +struct tv_mode { + char *name; + int clock; + int refresh; /* in millihertz (for precision) */ + u32 oversample; + int hsync_end, hblank_start, hblank_end, htotal; + bool progressive, trilevel_sync, component_only; + int vsync_start_f1, vsync_start_f2, vsync_len; + bool veq_ena; + int veq_start_f1, veq_start_f2, veq_len; + int vi_end_f1, vi_end_f2, nbr_end; + bool burst_ena; + int hburst_start, hburst_len; + int vburst_start_f1, vburst_end_f1; + int vburst_start_f2, vburst_end_f2; + int vburst_start_f3, vburst_end_f3; + int vburst_start_f4, vburst_end_f4; + /* + * subcarrier programming + */ + int dda2_size, dda3_size, dda1_inc, dda2_inc, dda3_inc; + u32 sc_reset; + bool pal_burst; + /* + * blank/black levels + */ + const struct video_levels *composite_levels, *svideo_levels; + const struct color_conversion *composite_color, *svideo_color; + const u32 *filter_table; + int max_srcw; +}; + + +/* + * Sub carrier DDA + * + * I think this works as follows: + * + * subcarrier freq = pixel_clock * (dda1_inc + dda2_inc / dda2_size) / 4096 + * + * Presumably, when dda3 is added in, it gets to adjust the dda2_inc value + * + * So, + * dda1_ideal = subcarrier/pixel * 4096 + * dda1_inc = floor (dda1_ideal) + * dda2 = dda1_ideal - dda1_inc + * + * then pick a ratio for dda2 that gives the closest approximation. If + * you can't get close enough, you can play with dda3 as well. This + * seems likely to happen when dda2 is small as the jumps would be larger + * + * To invert this, + * + * pixel_clock = subcarrier * 4096 / (dda1_inc + dda2_inc / dda2_size) + * + * The constants below were all computed using a 107.520MHz clock + */ + +/** + * Register programming values for TV modes. + * + * These values account for -1s required. + */ + +const static struct tv_mode tv_modes[] = { + { + .name = "NTSC-M", + .clock = 107520, + .refresh = 29970, + .oversample = TV_OVERSAMPLE_8X, + .component_only = 0, + /* 525 Lines, 60 Fields, 15.734KHz line, Sub-Carrier 3.580MHz */ + + .hsync_end = 64, .hblank_end = 124, + .hblank_start = 836, .htotal = 857, + + .progressive = FALSE, .trilevel_sync = FALSE, + + .vsync_start_f1 = 6, .vsync_start_f2 = 7, + .vsync_len = 6, + + .veq_ena = TRUE, .veq_start_f1 = 0, + .veq_start_f2 = 1, .veq_len = 18, + + .vi_end_f1 = 20, .vi_end_f2 = 21, + .nbr_end = 240, + + .burst_ena = TRUE, + .hburst_start = 72, .hburst_len = 34, + .vburst_start_f1 = 9, .vburst_end_f1 = 240, + .vburst_start_f2 = 10, .vburst_end_f2 = 240, + .vburst_start_f3 = 9, .vburst_end_f3 = 240, + .vburst_start_f4 = 10, .vburst_end_f4 = 240, + + /* desired 3.5800000 actual 3.5800000 clock 107.52 */ + .dda1_inc = 136, + .dda2_inc = 7624, .dda2_size = 20013, + .dda3_inc = 0, .dda3_size = 0, + .sc_reset = TV_SC_RESET_EVERY_4, + .pal_burst = FALSE, + + .composite_levels = &ntsc_m_levels_composite, + .composite_color = &ntsc_m_csc_composite, + .svideo_levels = &ntsc_m_levels_svideo, + .svideo_color = &ntsc_m_csc_svideo, + + .filter_table = filter_table, + }, + { + .name = "NTSC-443", + .clock = 107520, + .refresh = 29970, + .oversample = TV_OVERSAMPLE_8X, + .component_only = 0, + /* 525 Lines, 60 Fields, 15.734KHz line, Sub-Carrier 4.43MHz */ + .hsync_end = 64, .hblank_end = 124, + .hblank_start = 836, .htotal = 857, + + .progressive = FALSE, .trilevel_sync = FALSE, + + .vsync_start_f1 = 6, .vsync_start_f2 = 7, + .vsync_len = 6, + + .veq_ena = TRUE, .veq_start_f1 = 0, + .veq_start_f2 = 1, .veq_len = 18, + + .vi_end_f1 = 20, .vi_end_f2 = 21, + .nbr_end = 240, + + .burst_ena = 8, + .hburst_start = 72, .hburst_len = 34, + .vburst_start_f1 = 9, .vburst_end_f1 = 240, + .vburst_start_f2 = 10, .vburst_end_f2 = 240, + .vburst_start_f3 = 9, .vburst_end_f3 = 240, + .vburst_start_f4 = 10, .vburst_end_f4 = 240, + + /* desired 4.4336180 actual 4.4336180 clock 107.52 */ + .dda1_inc = 168, + .dda2_inc = 18557, .dda2_size = 20625, + .dda3_inc = 0, .dda3_size = 0, + .sc_reset = TV_SC_RESET_EVERY_8, + .pal_burst = TRUE, + + .composite_levels = &ntsc_m_levels_composite, + .composite_color = &ntsc_m_csc_composite, + .svideo_levels = &ntsc_m_levels_svideo, + .svideo_color = &ntsc_m_csc_svideo, + + .filter_table = filter_table, + }, + { + .name = "NTSC-J", + .clock = 107520, + .refresh = 29970, + .oversample = TV_OVERSAMPLE_8X, + .component_only = 0, + + /* 525 Lines, 60 Fields, 15.734KHz line, Sub-Carrier 3.580MHz */ + .hsync_end = 64, .hblank_end = 124, + .hblank_start = 836, .htotal = 857, + + .progressive = FALSE, .trilevel_sync = FALSE, + + .vsync_start_f1 = 6, .vsync_start_f2 = 7, + .vsync_len = 6, + + .veq_ena = TRUE, .veq_start_f1 = 0, + .veq_start_f2 = 1, .veq_len = 18, + + .vi_end_f1 = 20, .vi_end_f2 = 21, + .nbr_end = 240, + + .burst_ena = TRUE, + .hburst_start = 72, .hburst_len = 34, + .vburst_start_f1 = 9, .vburst_end_f1 = 240, + .vburst_start_f2 = 10, .vburst_end_f2 = 240, + .vburst_start_f3 = 9, .vburst_end_f3 = 240, + .vburst_start_f4 = 10, .vburst_end_f4 = 240, + + /* desired 3.5800000 actual 3.5800000 clock 107.52 */ + .dda1_inc = 136, + .dda2_inc = 7624, .dda2_size = 20013, + .dda3_inc = 0, .dda3_size = 0, + .sc_reset = TV_SC_RESET_EVERY_4, + .pal_burst = FALSE, + + .composite_levels = &ntsc_j_levels_composite, + .composite_color = &ntsc_j_csc_composite, + .svideo_levels = &ntsc_j_levels_svideo, + .svideo_color = &ntsc_j_csc_svideo, + + .filter_table = filter_table, + }, + { + .name = "PAL-M", + .clock = 107520, + .refresh = 29970, + .oversample = TV_OVERSAMPLE_8X, + .component_only = 0, + + /* 525 Lines, 60 Fields, 15.734KHz line, Sub-Carrier 3.580MHz */ + .hsync_end = 64, .hblank_end = 124, + .hblank_start = 836, .htotal = 857, + + .progressive = FALSE, .trilevel_sync = FALSE, + + .vsync_start_f1 = 6, .vsync_start_f2 = 7, + .vsync_len = 6, + + .veq_ena = TRUE, .veq_start_f1 = 0, + .veq_start_f2 = 1, .veq_len = 18, + + .vi_end_f1 = 20, .vi_end_f2 = 21, + .nbr_end = 240, + + .burst_ena = TRUE, + .hburst_start = 72, .hburst_len = 34, + .vburst_start_f1 = 9, .vburst_end_f1 = 240, + .vburst_start_f2 = 10, .vburst_end_f2 = 240, + .vburst_start_f3 = 9, .vburst_end_f3 = 240, + .vburst_start_f4 = 10, .vburst_end_f4 = 240, + + /* desired 3.5800000 actual 3.5800000 clock 107.52 */ + .dda1_inc = 136, + .dda2_inc = 7624, .dda2_size = 20013, + .dda3_inc = 0, .dda3_size = 0, + .sc_reset = TV_SC_RESET_EVERY_4, + .pal_burst = FALSE, + + .composite_levels = &pal_m_levels_composite, + .composite_color = &pal_m_csc_composite, + .svideo_levels = &pal_m_levels_svideo, + .svideo_color = &pal_m_csc_svideo, + + .filter_table = filter_table, + }, + { + /* 625 Lines, 50 Fields, 15.625KHz line, Sub-Carrier 4.434MHz */ + .name = "PAL-N", + .clock = 107520, + .refresh = 25000, + .oversample = TV_OVERSAMPLE_8X, + .component_only = 0, + + .hsync_end = 64, .hblank_end = 128, + .hblank_start = 844, .htotal = 863, + + .progressive = FALSE, .trilevel_sync = FALSE, + + + .vsync_start_f1 = 6, .vsync_start_f2 = 7, + .vsync_len = 6, + + .veq_ena = TRUE, .veq_start_f1 = 0, + .veq_start_f2 = 1, .veq_len = 18, + + .vi_end_f1 = 24, .vi_end_f2 = 25, + .nbr_end = 286, + + .burst_ena = TRUE, + .hburst_start = 73, .hburst_len = 34, + .vburst_start_f1 = 8, .vburst_end_f1 = 285, + .vburst_start_f2 = 8, .vburst_end_f2 = 286, + .vburst_start_f3 = 9, .vburst_end_f3 = 286, + .vburst_start_f4 = 9, .vburst_end_f4 = 285, + + + /* desired 4.4336180 actual 4.4336180 clock 107.52 */ + .dda1_inc = 168, + .dda2_inc = 18557, .dda2_size = 20625, + .dda3_inc = 0, .dda3_size = 0, + .sc_reset = TV_SC_RESET_EVERY_8, + .pal_burst = TRUE, + + .composite_levels = &pal_n_levels_composite, + .composite_color = &pal_n_csc_composite, + .svideo_levels = &pal_n_levels_svideo, + .svideo_color = &pal_n_csc_svideo, + + .filter_table = filter_table, + }, + { + /* 625 Lines, 50 Fields, 15.625KHz line, Sub-Carrier 4.434MHz */ + .name = "PAL", + .clock = 107520, + .refresh = 25000, + .oversample = TV_OVERSAMPLE_8X, + .component_only = 0, + + .hsync_end = 64, .hblank_end = 128, + .hblank_start = 844, .htotal = 863, + + .progressive = FALSE, .trilevel_sync = FALSE, + + .vsync_start_f1 = 5, .vsync_start_f2 = 6, + .vsync_len = 5, + + .veq_ena = TRUE, .veq_start_f1 = 0, + .veq_start_f2 = 1, .veq_len = 15, + + .vi_end_f1 = 24, .vi_end_f2 = 25, + .nbr_end = 286, + + .burst_ena = TRUE, + .hburst_start = 73, .hburst_len = 32, + .vburst_start_f1 = 8, .vburst_end_f1 = 285, + .vburst_start_f2 = 8, .vburst_end_f2 = 286, + .vburst_start_f3 = 9, .vburst_end_f3 = 286, + .vburst_start_f4 = 9, .vburst_end_f4 = 285, + + /* desired 4.4336180 actual 4.4336180 clock 107.52 */ + .dda1_inc = 168, + .dda2_inc = 18557, .dda2_size = 20625, + .dda3_inc = 0, .dda3_size = 0, + .sc_reset = TV_SC_RESET_EVERY_8, + .pal_burst = TRUE, + + .composite_levels = &pal_levels_composite, + .composite_color = &pal_csc_composite, + .svideo_levels = &pal_levels_svideo, + .svideo_color = &pal_csc_svideo, + + .filter_table = filter_table, + }, + { + .name = "480p@59.94Hz", + .clock = 107520, + .refresh = 59940, + .oversample = TV_OVERSAMPLE_4X, + .component_only = 1, + + .hsync_end = 64, .hblank_end = 122, + .hblank_start = 842, .htotal = 857, + + .progressive = TRUE,.trilevel_sync = FALSE, + + .vsync_start_f1 = 12, .vsync_start_f2 = 12, + .vsync_len = 12, + + .veq_ena = FALSE, + + .vi_end_f1 = 44, .vi_end_f2 = 44, + .nbr_end = 496, + + .burst_ena = FALSE, + + .filter_table = filter_table, + }, + { + .name = "480p@60Hz", + .clock = 107520, + .refresh = 60000, + .oversample = TV_OVERSAMPLE_4X, + .component_only = 1, + + .hsync_end = 64, .hblank_end = 122, + .hblank_start = 842, .htotal = 856, + + .progressive = TRUE,.trilevel_sync = FALSE, + + .vsync_start_f1 = 12, .vsync_start_f2 = 12, + .vsync_len = 12, + + .veq_ena = FALSE, + + .vi_end_f1 = 44, .vi_end_f2 = 44, + .nbr_end = 496, + + .burst_ena = FALSE, + + .filter_table = filter_table, + }, + { + .name = "576p", + .clock = 107520, + .refresh = 50000, + .oversample = TV_OVERSAMPLE_4X, + .component_only = 1, + + .hsync_end = 64, .hblank_end = 139, + .hblank_start = 859, .htotal = 863, + + .progressive = TRUE, .trilevel_sync = FALSE, + + .vsync_start_f1 = 10, .vsync_start_f2 = 10, + .vsync_len = 10, + + .veq_ena = FALSE, + + .vi_end_f1 = 48, .vi_end_f2 = 48, + .nbr_end = 575, + + .burst_ena = FALSE, + + .filter_table = filter_table, + }, + { + .name = "720p@60Hz", + .clock = 148800, + .refresh = 60000, + .oversample = TV_OVERSAMPLE_2X, + .component_only = 1, + + .hsync_end = 80, .hblank_end = 300, + .hblank_start = 1580, .htotal = 1649, + + .progressive = TRUE, .trilevel_sync = TRUE, + + .vsync_start_f1 = 10, .vsync_start_f2 = 10, + .vsync_len = 10, + + .veq_ena = FALSE, + + .vi_end_f1 = 29, .vi_end_f2 = 29, + .nbr_end = 719, + + .burst_ena = FALSE, + + .filter_table = filter_table, + }, + { + .name = "720p@59.94Hz", + .clock = 148800, + .refresh = 59940, + .oversample = TV_OVERSAMPLE_2X, + .component_only = 1, + + .hsync_end = 80, .hblank_end = 300, + .hblank_start = 1580, .htotal = 1651, + + .progressive = TRUE, .trilevel_sync = TRUE, + + .vsync_start_f1 = 10, .vsync_start_f2 = 10, + .vsync_len = 10, + + .veq_ena = FALSE, + + .vi_end_f1 = 29, .vi_end_f2 = 29, + .nbr_end = 719, + + .burst_ena = FALSE, + + .filter_table = filter_table, + }, + { + .name = "720p@50Hz", + .clock = 148800, + .refresh = 50000, + .oversample = TV_OVERSAMPLE_2X, + .component_only = 1, + + .hsync_end = 80, .hblank_end = 300, + .hblank_start = 1580, .htotal = 1979, + + .progressive = TRUE, .trilevel_sync = TRUE, + + .vsync_start_f1 = 10, .vsync_start_f2 = 10, + .vsync_len = 10, + + .veq_ena = FALSE, + + .vi_end_f1 = 29, .vi_end_f2 = 29, + .nbr_end = 719, + + .burst_ena = FALSE, + + .filter_table = filter_table, + .max_srcw = 800 + }, + { + .name = "1080i@50Hz", + .clock = 148800, + .refresh = 25000, + .oversample = TV_OVERSAMPLE_2X, + .component_only = 1, + + .hsync_end = 88, .hblank_end = 235, + .hblank_start = 2155, .htotal = 2639, + + .progressive = FALSE, .trilevel_sync = TRUE, + + .vsync_start_f1 = 4, .vsync_start_f2 = 5, + .vsync_len = 10, + + .veq_ena = TRUE, .veq_start_f1 = 4, + .veq_start_f2 = 4, .veq_len = 10, + + + .vi_end_f1 = 21, .vi_end_f2 = 22, + .nbr_end = 539, + + .burst_ena = FALSE, + + .filter_table = filter_table, + }, + { + .name = "1080i@60Hz", + .clock = 148800, + .refresh = 30000, + .oversample = TV_OVERSAMPLE_2X, + .component_only = 1, + + .hsync_end = 88, .hblank_end = 235, + .hblank_start = 2155, .htotal = 2199, + + .progressive = FALSE, .trilevel_sync = TRUE, + + .vsync_start_f1 = 4, .vsync_start_f2 = 5, + .vsync_len = 10, + + .veq_ena = TRUE, .veq_start_f1 = 4, + .veq_start_f2 = 4, .veq_len = 10, + + + .vi_end_f1 = 21, .vi_end_f2 = 22, + .nbr_end = 539, + + .burst_ena = FALSE, + + .filter_table = filter_table, + }, + { + .name = "1080i@59.94Hz", + .clock = 148800, + .refresh = 29970, + .oversample = TV_OVERSAMPLE_2X, + .component_only = 1, + + .hsync_end = 88, .hblank_end = 235, + .hblank_start = 2155, .htotal = 2200, + + .progressive = FALSE, .trilevel_sync = TRUE, + + .vsync_start_f1 = 4, .vsync_start_f2 = 5, + .vsync_len = 10, + + .veq_ena = TRUE, .veq_start_f1 = 4, + .veq_start_f2 = 4, .veq_len = 10, + + + .vi_end_f1 = 21, .vi_end_f2 = 22, + .nbr_end = 539, + + .burst_ena = FALSE, + + .filter_table = filter_table, + }, +}; + +#define NUM_TV_MODES sizeof(tv_modes) / sizeof (tv_modes[0]) + +static void +intel_tv_dpms(struct drm_encoder *encoder, int mode) +{ + struct drm_device *dev = encoder->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + + switch(mode) { + case DPMSModeOn: + I915_WRITE(TV_CTL, I915_READ(TV_CTL) | TV_ENC_ENABLE); + break; + case DPMSModeStandby: + case DPMSModeSuspend: + case DPMSModeOff: + I915_WRITE(TV_CTL, I915_READ(TV_CTL) & ~TV_ENC_ENABLE); + break; + } +} + +static void +intel_tv_save(struct drm_connector *connector) +{ + struct drm_device *dev = connector->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_output *intel_output = to_intel_output(connector); + struct intel_tv_priv *tv_priv = intel_output->dev_priv; + int i; + + tv_priv->save_TV_H_CTL_1 = I915_READ(TV_H_CTL_1); + tv_priv->save_TV_H_CTL_2 = I915_READ(TV_H_CTL_2); + tv_priv->save_TV_H_CTL_3 = I915_READ(TV_H_CTL_3); + tv_priv->save_TV_V_CTL_1 = I915_READ(TV_V_CTL_1); + tv_priv->save_TV_V_CTL_2 = I915_READ(TV_V_CTL_2); + tv_priv->save_TV_V_CTL_3 = I915_READ(TV_V_CTL_3); + tv_priv->save_TV_V_CTL_4 = I915_READ(TV_V_CTL_4); + tv_priv->save_TV_V_CTL_5 = I915_READ(TV_V_CTL_5); + tv_priv->save_TV_V_CTL_6 = I915_READ(TV_V_CTL_6); + tv_priv->save_TV_V_CTL_7 = I915_READ(TV_V_CTL_7); + tv_priv->save_TV_SC_CTL_1 = I915_READ(TV_SC_CTL_1); + tv_priv->save_TV_SC_CTL_2 = I915_READ(TV_SC_CTL_2); + tv_priv->save_TV_SC_CTL_3 = I915_READ(TV_SC_CTL_3); + + tv_priv->save_TV_CSC_Y = I915_READ(TV_CSC_Y); + tv_priv->save_TV_CSC_Y2 = I915_READ(TV_CSC_Y2); + tv_priv->save_TV_CSC_U = I915_READ(TV_CSC_U); + tv_priv->save_TV_CSC_U2 = I915_READ(TV_CSC_U2); + tv_priv->save_TV_CSC_V = I915_READ(TV_CSC_V); + tv_priv->save_TV_CSC_V2 = I915_READ(TV_CSC_V2); + tv_priv->save_TV_CLR_KNOBS = I915_READ(TV_CLR_KNOBS); + tv_priv->save_TV_CLR_LEVEL = I915_READ(TV_CLR_LEVEL); + tv_priv->save_TV_WIN_POS = I915_READ(TV_WIN_POS); + tv_priv->save_TV_WIN_SIZE = I915_READ(TV_WIN_SIZE); + tv_priv->save_TV_FILTER_CTL_1 = I915_READ(TV_FILTER_CTL_1); + tv_priv->save_TV_FILTER_CTL_2 = I915_READ(TV_FILTER_CTL_2); + tv_priv->save_TV_FILTER_CTL_3 = I915_READ(TV_FILTER_CTL_3); + + for (i = 0; i < 60; i++) + tv_priv->save_TV_H_LUMA[i] = I915_READ(TV_H_LUMA_0 + (i <<2)); + for (i = 0; i < 60; i++) + tv_priv->save_TV_H_CHROMA[i] = I915_READ(TV_H_CHROMA_0 + (i <<2)); + for (i = 0; i < 43; i++) + tv_priv->save_TV_V_LUMA[i] = I915_READ(TV_V_LUMA_0 + (i <<2)); + for (i = 0; i < 43; i++) + tv_priv->save_TV_V_CHROMA[i] = I915_READ(TV_V_CHROMA_0 + (i <<2)); + + tv_priv->save_TV_DAC = I915_READ(TV_DAC); + tv_priv->save_TV_CTL = I915_READ(TV_CTL); +} + +static void +intel_tv_restore(struct drm_connector *connector) +{ + struct drm_device *dev = connector->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_output *intel_output = to_intel_output(connector); + struct intel_tv_priv *tv_priv = intel_output->dev_priv; + struct drm_crtc *crtc = connector->encoder->crtc; + struct intel_crtc *intel_crtc; + int i; + + /* FIXME: No CRTC? */ + if (!crtc) + return; + + intel_crtc = to_intel_crtc(crtc); + I915_WRITE(TV_H_CTL_1, tv_priv->save_TV_H_CTL_1); + I915_WRITE(TV_H_CTL_2, tv_priv->save_TV_H_CTL_2); + I915_WRITE(TV_H_CTL_3, tv_priv->save_TV_H_CTL_3); + I915_WRITE(TV_V_CTL_1, tv_priv->save_TV_V_CTL_1); + I915_WRITE(TV_V_CTL_2, tv_priv->save_TV_V_CTL_2); + I915_WRITE(TV_V_CTL_3, tv_priv->save_TV_V_CTL_3); + I915_WRITE(TV_V_CTL_4, tv_priv->save_TV_V_CTL_4); + I915_WRITE(TV_V_CTL_5, tv_priv->save_TV_V_CTL_5); + I915_WRITE(TV_V_CTL_6, tv_priv->save_TV_V_CTL_6); + I915_WRITE(TV_V_CTL_7, tv_priv->save_TV_V_CTL_7); + I915_WRITE(TV_SC_CTL_1, tv_priv->save_TV_SC_CTL_1); + I915_WRITE(TV_SC_CTL_2, tv_priv->save_TV_SC_CTL_2); + I915_WRITE(TV_SC_CTL_3, tv_priv->save_TV_SC_CTL_3); + + I915_WRITE(TV_CSC_Y, tv_priv->save_TV_CSC_Y); + I915_WRITE(TV_CSC_Y2, tv_priv->save_TV_CSC_Y2); + I915_WRITE(TV_CSC_U, tv_priv->save_TV_CSC_U); + I915_WRITE(TV_CSC_U2, tv_priv->save_TV_CSC_U2); + I915_WRITE(TV_CSC_V, tv_priv->save_TV_CSC_V); + I915_WRITE(TV_CSC_V2, tv_priv->save_TV_CSC_V2); + I915_WRITE(TV_CLR_KNOBS, tv_priv->save_TV_CLR_KNOBS); + I915_WRITE(TV_CLR_LEVEL, tv_priv->save_TV_CLR_LEVEL); + + { + int pipeconf_reg = (intel_crtc->pipe == 0) ? + PIPEACONF : PIPEBCONF; + int dspcntr_reg = (intel_crtc->plane == 0) ? + DSPACNTR : DSPBCNTR; + int pipeconf = I915_READ(pipeconf_reg); + int dspcntr = I915_READ(dspcntr_reg); + int dspbase_reg = (intel_crtc->plane == 0) ? + DSPAADDR : DSPBADDR; + /* Pipe must be off here */ + I915_WRITE(dspcntr_reg, dspcntr & ~DISPLAY_PLANE_ENABLE); + /* Flush the plane changes */ + I915_WRITE(dspbase_reg, I915_READ(dspbase_reg)); + + if (!IS_I9XX(dev)) { + /* Wait for vblank for the disable to take effect */ + intel_wait_for_vblank(dev); + } + + I915_WRITE(pipeconf_reg, pipeconf & ~PIPEACONF_ENABLE); + /* Wait for vblank for the disable to take effect. */ + intel_wait_for_vblank(dev); + + /* Filter ctl must be set before TV_WIN_SIZE */ + I915_WRITE(TV_FILTER_CTL_1, tv_priv->save_TV_FILTER_CTL_1); + I915_WRITE(TV_FILTER_CTL_2, tv_priv->save_TV_FILTER_CTL_2); + I915_WRITE(TV_FILTER_CTL_3, tv_priv->save_TV_FILTER_CTL_3); + I915_WRITE(TV_WIN_POS, tv_priv->save_TV_WIN_POS); + I915_WRITE(TV_WIN_SIZE, tv_priv->save_TV_WIN_SIZE); + I915_WRITE(pipeconf_reg, pipeconf); + I915_WRITE(dspcntr_reg, dspcntr); + /* Flush the plane changes */ + I915_WRITE(dspbase_reg, I915_READ(dspbase_reg)); + } + + for (i = 0; i < 60; i++) + I915_WRITE(TV_H_LUMA_0 + (i <<2), tv_priv->save_TV_H_LUMA[i]); + for (i = 0; i < 60; i++) + I915_WRITE(TV_H_CHROMA_0 + (i <<2), tv_priv->save_TV_H_CHROMA[i]); + for (i = 0; i < 43; i++) + I915_WRITE(TV_V_LUMA_0 + (i <<2), tv_priv->save_TV_V_LUMA[i]); + for (i = 0; i < 43; i++) + I915_WRITE(TV_V_CHROMA_0 + (i <<2), tv_priv->save_TV_V_CHROMA[i]); + + I915_WRITE(TV_DAC, tv_priv->save_TV_DAC); + I915_WRITE(TV_CTL, tv_priv->save_TV_CTL); +} + +static const struct tv_mode * +intel_tv_mode_lookup (char *tv_format) +{ + int i; + + for (i = 0; i < sizeof(tv_modes) / sizeof (tv_modes[0]); i++) { + const struct tv_mode *tv_mode = &tv_modes[i]; + + if (!strcmp(tv_format, tv_mode->name)) + return tv_mode; + } + return NULL; +} + +static const struct tv_mode * +intel_tv_mode_find (struct intel_output *intel_output) +{ + struct intel_tv_priv *tv_priv = intel_output->dev_priv; + + return intel_tv_mode_lookup(tv_priv->tv_format); +} + +static enum drm_mode_status +intel_tv_mode_valid(struct drm_connector *connector, struct drm_display_mode *mode) +{ + struct intel_output *intel_output = to_intel_output(connector); + const struct tv_mode *tv_mode = intel_tv_mode_find(intel_output); + + /* Ensure TV refresh is close to desired refresh */ + if (tv_mode && abs(tv_mode->refresh - drm_mode_vrefresh(mode)) < 1) + return MODE_OK; + return MODE_CLOCK_RANGE; +} + + +static bool +intel_tv_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct drm_device *dev = encoder->dev; + struct drm_mode_config *drm_config = &dev->mode_config; + struct intel_output *intel_output = enc_to_intel_output(encoder); + const struct tv_mode *tv_mode = intel_tv_mode_find (intel_output); + struct drm_encoder *other_encoder; + + if (!tv_mode) + return FALSE; + + /* FIXME: lock encoder list */ + list_for_each_entry(other_encoder, &drm_config->encoder_list, head) { + if (other_encoder != encoder && + other_encoder->crtc == encoder->crtc) + return FALSE; + } + + adjusted_mode->clock = tv_mode->clock; + return TRUE; +} + +static void +intel_tv_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct drm_device *dev = encoder->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_crtc *crtc = encoder->crtc; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + struct intel_output *intel_output = enc_to_intel_output(encoder); + struct intel_tv_priv *tv_priv = intel_output->dev_priv; + const struct tv_mode *tv_mode = intel_tv_mode_find(intel_output); + u32 tv_ctl; + u32 hctl1, hctl2, hctl3; + u32 vctl1, vctl2, vctl3, vctl4, vctl5, vctl6, vctl7; + u32 scctl1, scctl2, scctl3; + int i, j; + const struct video_levels *video_levels; + const struct color_conversion *color_conversion; + bool burst_ena; + + if (!tv_mode) + return; /* can't happen (mode_prepare prevents this) */ + + tv_ctl = 0; + + switch (tv_priv->type) { + default: + case DRM_MODE_CONNECTOR_Unknown: + case DRM_MODE_CONNECTOR_Composite: + tv_ctl |= TV_ENC_OUTPUT_COMPOSITE; + video_levels = tv_mode->composite_levels; + color_conversion = tv_mode->composite_color; + burst_ena = tv_mode->burst_ena; + break; + case DRM_MODE_CONNECTOR_Component: + tv_ctl |= TV_ENC_OUTPUT_COMPONENT; + video_levels = &component_levels; + if (tv_mode->burst_ena) + color_conversion = &sdtv_csc_yprpb; + else + color_conversion = &hdtv_csc_yprpb; + burst_ena = FALSE; + break; + case DRM_MODE_CONNECTOR_SVIDEO: + tv_ctl |= TV_ENC_OUTPUT_SVIDEO; + video_levels = tv_mode->svideo_levels; + color_conversion = tv_mode->svideo_color; + burst_ena = tv_mode->burst_ena; + break; + } + hctl1 = (tv_mode->hsync_end << TV_HSYNC_END_SHIFT) | + (tv_mode->htotal << TV_HTOTAL_SHIFT); + + hctl2 = (tv_mode->hburst_start << 16) | + (tv_mode->hburst_len << TV_HBURST_LEN_SHIFT); + + if (burst_ena) + hctl2 |= TV_BURST_ENA; + + hctl3 = (tv_mode->hblank_start << TV_HBLANK_START_SHIFT) | + (tv_mode->hblank_end << TV_HBLANK_END_SHIFT); + + vctl1 = (tv_mode->nbr_end << TV_NBR_END_SHIFT) | + (tv_mode->vi_end_f1 << TV_VI_END_F1_SHIFT) | + (tv_mode->vi_end_f2 << TV_VI_END_F2_SHIFT); + + vctl2 = (tv_mode->vsync_len << TV_VSYNC_LEN_SHIFT) | + (tv_mode->vsync_start_f1 << TV_VSYNC_START_F1_SHIFT) | + (tv_mode->vsync_start_f2 << TV_VSYNC_START_F2_SHIFT); + + vctl3 = (tv_mode->veq_len << TV_VEQ_LEN_SHIFT) | + (tv_mode->veq_start_f1 << TV_VEQ_START_F1_SHIFT) | + (tv_mode->veq_start_f2 << TV_VEQ_START_F2_SHIFT); + + if (tv_mode->veq_ena) + vctl3 |= TV_EQUAL_ENA; + + vctl4 = (tv_mode->vburst_start_f1 << TV_VBURST_START_F1_SHIFT) | + (tv_mode->vburst_end_f1 << TV_VBURST_END_F1_SHIFT); + + vctl5 = (tv_mode->vburst_start_f2 << TV_VBURST_START_F2_SHIFT) | + (tv_mode->vburst_end_f2 << TV_VBURST_END_F2_SHIFT); + + vctl6 = (tv_mode->vburst_start_f3 << TV_VBURST_START_F3_SHIFT) | + (tv_mode->vburst_end_f3 << TV_VBURST_END_F3_SHIFT); + + vctl7 = (tv_mode->vburst_start_f4 << TV_VBURST_START_F4_SHIFT) | + (tv_mode->vburst_end_f4 << TV_VBURST_END_F4_SHIFT); + + if (intel_crtc->pipe == 1) + tv_ctl |= TV_ENC_PIPEB_SELECT; + tv_ctl |= tv_mode->oversample; + + if (tv_mode->progressive) + tv_ctl |= TV_PROGRESSIVE; + if (tv_mode->trilevel_sync) + tv_ctl |= TV_TRILEVEL_SYNC; + if (tv_mode->pal_burst) + tv_ctl |= TV_PAL_BURST; + scctl1 = 0; + /* dda1 implies valid video levels */ + if (tv_mode->dda1_inc) { + scctl1 |= TV_SC_DDA1_EN; + scctl1 |= video_levels->burst << TV_BURST_LEVEL_SHIFT; + } + + if (tv_mode->dda2_inc) + scctl1 |= TV_SC_DDA2_EN; + + if (tv_mode->dda3_inc) + scctl1 |= TV_SC_DDA3_EN; + + scctl1 |= tv_mode->sc_reset; + scctl1 |= tv_mode->dda1_inc << TV_SCDDA1_INC_SHIFT; + + scctl2 = tv_mode->dda2_size << TV_SCDDA2_SIZE_SHIFT | + tv_mode->dda2_inc << TV_SCDDA2_INC_SHIFT; + + scctl3 = tv_mode->dda3_size << TV_SCDDA3_SIZE_SHIFT | + tv_mode->dda3_inc << TV_SCDDA3_INC_SHIFT; + + /* Enable two fixes for the chips that need them. */ + if (dev->pci_device < 0x2772) + tv_ctl |= TV_ENC_C0_FIX | TV_ENC_SDP_FIX; + + I915_WRITE(TV_H_CTL_1, hctl1); + I915_WRITE(TV_H_CTL_2, hctl2); + I915_WRITE(TV_H_CTL_3, hctl3); + I915_WRITE(TV_V_CTL_1, vctl1); + I915_WRITE(TV_V_CTL_2, vctl2); + I915_WRITE(TV_V_CTL_3, vctl3); + I915_WRITE(TV_V_CTL_4, vctl4); + I915_WRITE(TV_V_CTL_5, vctl5); + I915_WRITE(TV_V_CTL_6, vctl6); + I915_WRITE(TV_V_CTL_7, vctl7); + I915_WRITE(TV_SC_CTL_1, scctl1); + I915_WRITE(TV_SC_CTL_2, scctl2); + I915_WRITE(TV_SC_CTL_3, scctl3); + + if (color_conversion) { + I915_WRITE(TV_CSC_Y, (color_conversion->ry << 16) | + color_conversion->gy); + I915_WRITE(TV_CSC_Y2,(color_conversion->by << 16) | + color_conversion->ay); + I915_WRITE(TV_CSC_U, (color_conversion->ru << 16) | + color_conversion->gu); + I915_WRITE(TV_CSC_U2, (color_conversion->bu << 16) | + color_conversion->au); + I915_WRITE(TV_CSC_V, (color_conversion->rv << 16) | + color_conversion->gv); + I915_WRITE(TV_CSC_V2, (color_conversion->bv << 16) | + color_conversion->av); + } + + I915_WRITE(TV_CLR_KNOBS, 0x00606000); + if (video_levels) + I915_WRITE(TV_CLR_LEVEL, + ((video_levels->black << TV_BLACK_LEVEL_SHIFT) | + (video_levels->blank << TV_BLANK_LEVEL_SHIFT))); + { + int pipeconf_reg = (intel_crtc->pipe == 0) ? + PIPEACONF : PIPEBCONF; + int dspcntr_reg = (intel_crtc->plane == 0) ? + DSPACNTR : DSPBCNTR; + int pipeconf = I915_READ(pipeconf_reg); + int dspcntr = I915_READ(dspcntr_reg); + int dspbase_reg = (intel_crtc->plane == 0) ? + DSPAADDR : DSPBADDR; + int xpos = 0x0, ypos = 0x0; + unsigned int xsize, ysize; + /* Pipe must be off here */ + I915_WRITE(dspcntr_reg, dspcntr & ~DISPLAY_PLANE_ENABLE); + /* Flush the plane changes */ + I915_WRITE(dspbase_reg, I915_READ(dspbase_reg)); + + /* Wait for vblank for the disable to take effect */ + if (!IS_I9XX(dev)) + intel_wait_for_vblank(dev); + + I915_WRITE(pipeconf_reg, pipeconf & ~PIPEACONF_ENABLE); + /* Wait for vblank for the disable to take effect. */ + intel_wait_for_vblank(dev); + + /* Filter ctl must be set before TV_WIN_SIZE */ + I915_WRITE(TV_FILTER_CTL_1, TV_AUTO_SCALE); + xsize = tv_mode->hblank_start - tv_mode->hblank_end; + if (tv_mode->progressive) + ysize = tv_mode->nbr_end + 1; + else + ysize = 2*tv_mode->nbr_end + 1; + + xpos += tv_priv->margin[TV_MARGIN_LEFT]; + ypos += tv_priv->margin[TV_MARGIN_TOP]; + xsize -= (tv_priv->margin[TV_MARGIN_LEFT] + + tv_priv->margin[TV_MARGIN_RIGHT]); + ysize -= (tv_priv->margin[TV_MARGIN_TOP] + + tv_priv->margin[TV_MARGIN_BOTTOM]); + I915_WRITE(TV_WIN_POS, (xpos<<16)|ypos); + I915_WRITE(TV_WIN_SIZE, (xsize<<16)|ysize); + + I915_WRITE(pipeconf_reg, pipeconf); + I915_WRITE(dspcntr_reg, dspcntr); + /* Flush the plane changes */ + I915_WRITE(dspbase_reg, I915_READ(dspbase_reg)); + } + + j = 0; + for (i = 0; i < 60; i++) + I915_WRITE(TV_H_LUMA_0 + (i<<2), tv_mode->filter_table[j++]); + for (i = 0; i < 60; i++) + I915_WRITE(TV_H_CHROMA_0 + (i<<2), tv_mode->filter_table[j++]); + for (i = 0; i < 43; i++) + I915_WRITE(TV_V_LUMA_0 + (i<<2), tv_mode->filter_table[j++]); + for (i = 0; i < 43; i++) + I915_WRITE(TV_V_CHROMA_0 + (i<<2), tv_mode->filter_table[j++]); + I915_WRITE(TV_DAC, 0); + I915_WRITE(TV_CTL, tv_ctl); +} + +static const struct drm_display_mode reported_modes[] = { + { + .name = "NTSC 480i", + .clock = 107520, + .hdisplay = 1280, + .hsync_start = 1368, + .hsync_end = 1496, + .htotal = 1712, + + .vdisplay = 1024, + .vsync_start = 1027, + .vsync_end = 1034, + .vtotal = 1104, + .type = DRM_MODE_TYPE_DRIVER, + }, +}; + +/** + * Detects TV presence by checking for load. + * + * Requires that the current pipe's DPLL is active. + + * \return TRUE if TV is connected. + * \return FALSE if TV is disconnected. + */ +static int +intel_tv_detect_type (struct drm_crtc *crtc, struct intel_output *intel_output) +{ + struct drm_encoder *encoder = &intel_output->enc; + struct drm_device *dev = encoder->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + u32 pipeastat, pipeastat_save; + u32 tv_ctl, save_tv_ctl; + u32 tv_dac, save_tv_dac; + int type = DRM_MODE_CONNECTOR_Unknown; + + tv_dac = I915_READ(TV_DAC); + + /* Disable TV interrupts around load detect or we'll recurse */ + pipeastat = I915_READ(PIPEASTAT); + pipeastat_save = pipeastat; + pipeastat &= ~PIPE_HOTPLUG_INTERRUPT_ENABLE; + pipeastat &= ~PIPE_HOTPLUG_TV_INTERRUPT_ENABLE; + I915_WRITE(PIPEASTAT, pipeastat | PIPE_HOTPLUG_TV_INTERRUPT_STATUS | + PIPE_HOTPLUG_INTERRUPT_STATUS); + + /* + * Detect TV by polling) + */ + if (intel_output->load_detect_temp) { + /* TV not currently running, prod it with destructive detect */ + save_tv_dac = tv_dac; + tv_ctl = I915_READ(TV_CTL); + save_tv_ctl = tv_ctl; + tv_ctl &= ~TV_ENC_ENABLE; + tv_ctl &= ~TV_TEST_MODE_MASK; + tv_ctl |= TV_TEST_MODE_MONITOR_DETECT; + tv_dac &= ~TVDAC_SENSE_MASK; + tv_dac |= (TVDAC_STATE_CHG_EN | + TVDAC_A_SENSE_CTL | + TVDAC_B_SENSE_CTL | + TVDAC_C_SENSE_CTL | + DAC_CTL_OVERRIDE | + DAC_A_0_7_V | + DAC_B_0_7_V | + DAC_C_0_7_V); + I915_WRITE(TV_CTL, tv_ctl); + I915_WRITE(TV_DAC, tv_dac); + intel_wait_for_vblank(dev); + tv_dac = I915_READ(TV_DAC); + I915_WRITE(TV_DAC, save_tv_dac); + I915_WRITE(TV_CTL, save_tv_ctl); + } + /* + * A B C + * 0 1 1 Composite + * 1 0 X svideo + * 0 0 0 Component + */ + if ((tv_dac & TVDAC_SENSE_MASK) == (TVDAC_B_SENSE | TVDAC_C_SENSE)) { + DRM_DEBUG("Detected Composite TV connection\n"); + type = DRM_MODE_CONNECTOR_Composite; + } else if ((tv_dac & (TVDAC_A_SENSE|TVDAC_B_SENSE)) == TVDAC_A_SENSE) { + DRM_DEBUG("Detected S-Video TV connection\n"); + type = DRM_MODE_CONNECTOR_SVIDEO; + } else if ((tv_dac & TVDAC_SENSE_MASK) == 0) { + DRM_DEBUG("Detected Component TV connection\n"); + type = DRM_MODE_CONNECTOR_Component; + } else { + DRM_DEBUG("No TV connection detected\n"); + type = -1; + } + + /* Restore interrupt config */ + I915_WRITE(PIPEASTAT, pipeastat_save | PIPE_HOTPLUG_TV_INTERRUPT_STATUS | + PIPE_HOTPLUG_INTERRUPT_STATUS); + + return type; +} + +/** + * Detect the TV connection. + * + * Currently this always returns CONNECTOR_STATUS_UNKNOWN, as we need to be sure + * we have a pipe programmed in order to probe the TV. + */ +static enum drm_connector_status +intel_tv_detect(struct drm_connector *connector) +{ + struct drm_crtc *crtc; + struct drm_display_mode mode; + struct intel_output *intel_output = to_intel_output(connector); + struct intel_tv_priv *tv_priv = intel_output->dev_priv; + struct drm_encoder *encoder = &intel_output->enc; + int dpms_mode; + int type = tv_priv->type; + + mode = reported_modes[0]; + drm_mode_set_crtcinfo(&mode, CRTC_INTERLACE_HALVE_V); + + if (encoder->crtc) { + type = intel_tv_detect_type(encoder->crtc, intel_output); + } else { + crtc = intel_get_load_detect_pipe(intel_output, &mode, &dpms_mode); + if (crtc) { + type = intel_tv_detect_type(crtc, intel_output); + intel_release_load_detect_pipe(intel_output, dpms_mode); + } else + type = -1; + } + +#if 0 + if (type != tv_priv->type) { + struct drm_property *connector_property = + connector->dev->mode_config.connector_type_property; + + tv_priv->type = type; + drm_connector_property_set_value(connector, connector_property, + type); + } +#endif + if (type < 0) + return connector_status_disconnected; + + return connector_status_connected; +} + +static struct input_res { + char *name; + int w, h; +} input_res_table[] = +{ + {"640x480", 640, 480}, + {"800x600", 800, 600}, + {"1024x768", 1024, 768}, + {"1280x1024", 1280, 1024}, + {"848x480", 848, 480}, + {"1280x720", 1280, 720}, + {"1920x1080", 1920, 1080}, +}; + +/** + * Stub get_modes function. + * + * This should probably return a set of fixed modes, unless we can figure out + * how to probe modes off of TV connections. + */ + +static int +intel_tv_get_modes(struct drm_connector *connector) +{ + struct drm_display_mode *mode_ptr; + struct intel_output *intel_output = to_intel_output(connector); + const struct tv_mode *tv_mode = intel_tv_mode_find(intel_output); + int j; + + for (j = 0; j < sizeof(input_res_table) / sizeof(input_res_table[0]); + j++) { + struct input_res *input = &input_res_table[j]; + unsigned int hactive_s = input->w; + unsigned int vactive_s = input->h; + + if (tv_mode->max_srcw && input->w > tv_mode->max_srcw) + continue; + + if (input->w > 1024 && (!tv_mode->progressive + && !tv_mode->component_only)) + continue; + + mode_ptr = drm_calloc(1, sizeof(struct drm_display_mode), + DRM_MEM_DRIVER); + strncpy(mode_ptr->name, input->name, DRM_DISPLAY_MODE_LEN); + + mode_ptr->hdisplay = hactive_s; + mode_ptr->hsync_start = hactive_s + 1; + mode_ptr->hsync_end = hactive_s + 64; + if (mode_ptr->hsync_end <= mode_ptr->hsync_start) + mode_ptr->hsync_end = mode_ptr->hsync_start + 1; + mode_ptr->htotal = hactive_s + 96; + + mode_ptr->vdisplay = vactive_s; + mode_ptr->vsync_start = vactive_s + 1; + mode_ptr->vsync_end = vactive_s + 32; + if (mode_ptr->vsync_end <= mode_ptr->vsync_start) + mode_ptr->vsync_end = mode_ptr->vsync_start + 1; + mode_ptr->vtotal = vactive_s + 33; + + mode_ptr->clock = (int) (tv_mode->refresh * + mode_ptr->vtotal * + mode_ptr->htotal / 1000) / 1000; + + mode_ptr->type = DRM_MODE_TYPE_DRIVER; + drm_mode_probed_add(connector, mode_ptr); + } + + return 0; +} + +static void +intel_tv_destroy (struct drm_connector *connector) +{ + struct intel_output *intel_output = to_intel_output(connector); + + drm_sysfs_connector_remove(connector); + drm_connector_cleanup(connector); + drm_free(intel_output, sizeof(struct intel_output) + sizeof(struct intel_tv_priv), + DRM_MEM_DRIVER); +} + + +static bool +intel_tv_set_property(struct drm_connector *connector, struct drm_property *property, + uint64_t val) +{ + struct drm_device *dev = connector->dev; + struct intel_output *intel_output = to_intel_output(connector); + struct intel_tv_priv *tv_priv = intel_output->dev_priv; + int ret = 0; + + ret = drm_connector_property_set_value(connector, property, val); + if (ret < 0) + goto out; + + if (property == dev->mode_config.tv_left_margin_property) + tv_priv->margin[TV_MARGIN_LEFT] = val; + else if (property == dev->mode_config.tv_right_margin_property) + tv_priv->margin[TV_MARGIN_RIGHT] = val; + else if (property == dev->mode_config.tv_top_margin_property) + tv_priv->margin[TV_MARGIN_TOP] = val; + else if (property == dev->mode_config.tv_bottom_margin_property) + tv_priv->margin[TV_MARGIN_BOTTOM] = val; + else if (property == dev->mode_config.tv_mode_property) { + if (val >= NUM_TV_MODES) { + ret = -EINVAL; + goto out; + } + tv_priv->tv_format = tv_modes[val].name; + intel_tv_mode_set(&intel_output->enc, NULL, NULL); + } else { + ret = -EINVAL; + goto out; + } + + intel_tv_mode_set(&intel_output->enc, NULL, NULL); +out: + return ret; +} + +static const struct drm_encoder_helper_funcs intel_tv_helper_funcs = { + .dpms = intel_tv_dpms, + .mode_fixup = intel_tv_mode_fixup, + .prepare = intel_encoder_prepare, + .mode_set = intel_tv_mode_set, + .commit = intel_encoder_commit, +}; + +static const struct drm_connector_funcs intel_tv_connector_funcs = { + .save = intel_tv_save, + .restore = intel_tv_restore, + .detect = intel_tv_detect, + .destroy = intel_tv_destroy, + .set_property = intel_tv_set_property, + .fill_modes = drm_helper_probe_single_connector_modes, +}; + +static const struct drm_connector_helper_funcs intel_tv_connector_helper_funcs = { + .mode_valid = intel_tv_mode_valid, + .get_modes = intel_tv_get_modes, + .best_encoder = intel_best_encoder, +}; + +void intel_tv_enc_destroy(struct drm_encoder *encoder) +{ + drm_encoder_cleanup(encoder); +} + +static const struct drm_encoder_funcs intel_tv_enc_funcs = { + .destroy = intel_tv_enc_destroy, +}; + + +void +intel_tv_init(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_connector *connector; + struct intel_output *intel_output; + struct intel_tv_priv *tv_priv; + u32 tv_dac_on, tv_dac_off, save_tv_dac; + char **tv_format_names; + int i, initial_mode = 0; + + if ((I915_READ(TV_CTL) & TV_FUSE_STATE_MASK) == TV_FUSE_STATE_DISABLED) + return; + + /* Even if we have an encoder we may not have a connector */ + if (!dev_priv->int_tv_support) + return; + + /* + * Sanity check the TV output by checking to see if the + * DAC register holds a value + */ + save_tv_dac = I915_READ(TV_DAC); + + I915_WRITE(TV_DAC, save_tv_dac | TVDAC_STATE_CHG_EN); + tv_dac_on = I915_READ(TV_DAC); + + I915_WRITE(TV_DAC, save_tv_dac & ~TVDAC_STATE_CHG_EN); + tv_dac_off = I915_READ(TV_DAC); + + I915_WRITE(TV_DAC, save_tv_dac); + + /* + * If the register does not hold the state change enable + * bit, (either as a 0 or a 1), assume it doesn't really + * exist + */ + if ((tv_dac_on & TVDAC_STATE_CHG_EN) == 0 || + (tv_dac_off & TVDAC_STATE_CHG_EN) != 0) + return; + + intel_output = drm_calloc(1, sizeof(struct intel_output) + + sizeof(struct intel_tv_priv), DRM_MEM_DRIVER); + if (!intel_output) { + return; + } + connector = &intel_output->base; + + drm_connector_init(dev, connector, &intel_tv_connector_funcs, + DRM_MODE_CONNECTOR_SVIDEO); + + drm_encoder_init(dev, &intel_output->enc, &intel_tv_enc_funcs, + DRM_MODE_ENCODER_TVDAC); + + drm_mode_connector_attach_encoder(&intel_output->base, &intel_output->enc); + tv_priv = (struct intel_tv_priv *)(intel_output + 1); + intel_output->type = INTEL_OUTPUT_TVOUT; + intel_output->enc.possible_crtcs = ((1 << 0) | (1 << 1)); + intel_output->enc.possible_clones = (1 << INTEL_OUTPUT_TVOUT); + intel_output->dev_priv = tv_priv; + tv_priv->type = DRM_MODE_CONNECTOR_Unknown; + + /* BIOS margin values */ + tv_priv->margin[TV_MARGIN_LEFT] = 54; + tv_priv->margin[TV_MARGIN_TOP] = 36; + tv_priv->margin[TV_MARGIN_RIGHT] = 46; + tv_priv->margin[TV_MARGIN_BOTTOM] = 37; + + tv_priv->tv_format = kstrdup(tv_modes[initial_mode].name, GFP_KERNEL); + + drm_encoder_helper_add(&intel_output->enc, &intel_tv_helper_funcs); + drm_connector_helper_add(connector, &intel_tv_connector_helper_funcs); + connector->interlace_allowed = FALSE; + connector->doublescan_allowed = FALSE; + + /* Create TV properties then attach current values */ + tv_format_names = drm_alloc(sizeof(char *) * NUM_TV_MODES, + DRM_MEM_DRIVER); + if (!tv_format_names) + goto out; + for (i = 0; i < NUM_TV_MODES; i++) + tv_format_names[i] = tv_modes[i].name; + drm_create_tv_properties(dev, NUM_TV_MODES, tv_format_names); + + drm_connector_attach_property(connector, dev->mode_config.tv_mode_property, + initial_mode); + drm_connector_attach_property(connector, + dev->mode_config.tv_left_margin_property, + tv_priv->margin[TV_MARGIN_LEFT]); + drm_connector_attach_property(connector, + dev->mode_config.tv_top_margin_property, + tv_priv->margin[TV_MARGIN_TOP]); + drm_connector_attach_property(connector, + dev->mode_config.tv_right_margin_property, + tv_priv->margin[TV_MARGIN_RIGHT]); + drm_connector_attach_property(connector, + dev->mode_config.tv_bottom_margin_property, + tv_priv->margin[TV_MARGIN_BOTTOM]); +out: + drm_sysfs_connector_add(connector); +} diff --git a/linux-core/radeon_ms.h b/linux-core/radeon_ms.h new file mode 120000 index 00000000..da340c5d --- /dev/null +++ b/linux-core/radeon_ms.h @@ -0,0 +1 @@ +../shared-core/radeon_ms.h
\ No newline at end of file diff --git a/linux-core/radeon_ms_bo.c b/linux-core/radeon_ms_bo.c new file mode 120000 index 00000000..d05df59f --- /dev/null +++ b/linux-core/radeon_ms_bo.c @@ -0,0 +1 @@ +../shared-core/radeon_ms_bo.c
\ No newline at end of file diff --git a/linux-core/radeon_ms_bus.c b/linux-core/radeon_ms_bus.c new file mode 120000 index 00000000..50f649d0 --- /dev/null +++ b/linux-core/radeon_ms_bus.c @@ -0,0 +1 @@ +../shared-core/radeon_ms_bus.c
\ No newline at end of file diff --git a/linux-core/radeon_ms_combios.c b/linux-core/radeon_ms_combios.c new file mode 120000 index 00000000..d7b99958 --- /dev/null +++ b/linux-core/radeon_ms_combios.c @@ -0,0 +1 @@ +../shared-core/radeon_ms_combios.c
\ No newline at end of file diff --git a/linux-core/radeon_ms_combios.h b/linux-core/radeon_ms_combios.h new file mode 120000 index 00000000..5b19c708 --- /dev/null +++ b/linux-core/radeon_ms_combios.h @@ -0,0 +1 @@ +../shared-core/radeon_ms_combios.h
\ No newline at end of file diff --git a/linux-core/radeon_ms_compat.c b/linux-core/radeon_ms_compat.c new file mode 100644 index 00000000..6efdc786 --- /dev/null +++ b/linux-core/radeon_ms_compat.c @@ -0,0 +1,67 @@ +/* + * Copyright 2007 Dave Airlie + * Copyright 2007 Alex Deucher + * Copyright 2007 Michel Dänzer + * Copyright 2007 Roland Scheidegger + * Copyright 2007 Vladimir Dergachev + * Copyright 2007 Nicolai Haehnle + * Copyright 2007 Aapo Tahkola + * Copyright 2007 Ben Skeggs + * Copyright 2007 Jérôme Glisse + * All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + */ +/* + * Authors: + * Jerome Glisse <glisse@freedesktop.org> + */ +#include "drmP.h" +#include "drm.h" +#include "radeon_ms.h" + +/** + * Called whenever a 32-bit process running under a 64-bit kernel + * performs an ioctl on /dev/dri/card<n>. + + * \param filp file pointer. + * \param cmd command. + * \param arg user argument. + * \return zero on success or negative number on failure. + */ +long radeon_ms_compat_ioctl(struct file *filp, unsigned int cmd, + unsigned long arg) +{ + unsigned int nr = DRM_IOCTL_NR(cmd); + drm_ioctl_compat_t *fn = NULL; + int ret; + + if (nr < DRM_COMMAND_BASE) + return drm_compat_ioctl(filp, cmd, arg); + + lock_kernel(); + if (fn != NULL) + ret = (*fn)(filp, cmd, arg); + else + ret = drm_ioctl(filp->f_dentry->d_inode, filp, cmd, arg); + unlock_kernel(); + + return ret; +} diff --git a/linux-core/radeon_ms_cp.c b/linux-core/radeon_ms_cp.c new file mode 120000 index 00000000..6aee3e6e --- /dev/null +++ b/linux-core/radeon_ms_cp.c @@ -0,0 +1 @@ +../shared-core/radeon_ms_cp.c
\ No newline at end of file diff --git a/linux-core/radeon_ms_cp_mc.c b/linux-core/radeon_ms_cp_mc.c new file mode 120000 index 00000000..0ae1a647 --- /dev/null +++ b/linux-core/radeon_ms_cp_mc.c @@ -0,0 +1 @@ +../shared-core/radeon_ms_cp_mc.c
\ No newline at end of file diff --git a/linux-core/radeon_ms_crtc.c b/linux-core/radeon_ms_crtc.c new file mode 120000 index 00000000..31f11447 --- /dev/null +++ b/linux-core/radeon_ms_crtc.c @@ -0,0 +1 @@ +../shared-core/radeon_ms_crtc.c
\ No newline at end of file diff --git a/linux-core/radeon_ms_dac.c b/linux-core/radeon_ms_dac.c new file mode 120000 index 00000000..cb523cfb --- /dev/null +++ b/linux-core/radeon_ms_dac.c @@ -0,0 +1 @@ +../shared-core/radeon_ms_dac.c
\ No newline at end of file diff --git a/linux-core/radeon_ms_drm.c b/linux-core/radeon_ms_drm.c new file mode 120000 index 00000000..8bbf19a5 --- /dev/null +++ b/linux-core/radeon_ms_drm.c @@ -0,0 +1 @@ +../shared-core/radeon_ms_drm.c
\ No newline at end of file diff --git a/linux-core/radeon_ms_drm.h b/linux-core/radeon_ms_drm.h new file mode 120000 index 00000000..5d9d7319 --- /dev/null +++ b/linux-core/radeon_ms_drm.h @@ -0,0 +1 @@ +../shared-core/radeon_ms_drm.h
\ No newline at end of file diff --git a/linux-core/radeon_ms_drv.c b/linux-core/radeon_ms_drv.c new file mode 100644 index 00000000..fc3c106a --- /dev/null +++ b/linux-core/radeon_ms_drv.c @@ -0,0 +1,144 @@ +/* + * Copyright 2007 Jerome Glisse. + * All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + */ +/* + * Authors: + * Jerome Glisse <glisse@freedesktop.org> + */ +#include "drm_pciids.h" +#include "radeon_ms.h" + +extern struct drm_fence_driver r3xx_fence_driver; +extern struct drm_bo_driver radeon_ms_bo_driver; +extern struct drm_ioctl_desc radeon_ms_ioctls[]; +extern int radeon_ms_num_ioctls; + +static int radeon_ms_driver_dri_library_name(struct drm_device * dev, + char * buf); +static int radeon_ms_driver_probe(struct pci_dev *pdev, + const struct pci_device_id *ent); + +static struct pci_device_id pciidlist[] = { + radeon_ms_PCI_IDS +}; + +static struct drm_driver driver = { + .load = radeon_ms_driver_load, + .firstopen = NULL, + .open = radeon_ms_driver_open, + .preclose = NULL, + .postclose = NULL, + .lastclose = radeon_ms_driver_lastclose, + .unload = radeon_ms_driver_unload, + .dma_ioctl = radeon_ms_driver_dma_ioctl, + .dma_ready = NULL, + .dma_quiescent = NULL, + .context_ctor = NULL, + .context_dtor = NULL, + .kernel_context_switch = NULL, + .kernel_context_switch_unlock = NULL, + .dri_library_name = radeon_ms_driver_dri_library_name, + .device_is_agp = NULL, + .irq_handler = radeon_ms_irq_handler, + .irq_preinstall = radeon_ms_irq_preinstall, + .irq_postinstall = radeon_ms_irq_postinstall, + .irq_uninstall = radeon_ms_irq_uninstall, + .reclaim_buffers = drm_core_reclaim_buffers, + .reclaim_buffers_locked = NULL, + .reclaim_buffers_idlelocked = NULL, + .get_map_ofs = drm_core_get_map_ofs, + .get_reg_ofs = drm_core_get_reg_ofs, + .set_version = NULL, + .fb_probe = radeonfb_probe, + .fb_remove = radeonfb_remove, + .fence_driver = &r3xx_fence_driver, + .bo_driver = &radeon_ms_bo_driver, + .major = DRIVER_MAJOR, + .minor = DRIVER_MINOR, + .patchlevel = DRIVER_PATCHLEVEL, + .name = DRIVER_NAME, + .desc = DRIVER_DESC, + .date = DRIVER_DATE, + .driver_features = + DRIVER_USE_AGP | DRIVER_USE_MTRR | DRIVER_PCI_DMA | DRIVER_SG | + DRIVER_HAVE_IRQ | DRIVER_HAVE_DMA | DRIVER_IRQ_SHARED, + .dev_priv_size = 0, + .ioctls = radeon_ms_ioctls, + .num_ioctls = 0, + .fops = { + .owner = THIS_MODULE, + .open = drm_open, + .release = drm_release, + .ioctl = drm_ioctl, + .mmap = drm_mmap, + .poll = drm_poll, + .fasync = drm_fasync, +#if defined(CONFIG_COMPAT) && LINUX_VERSION_CODE > KERNEL_VERSION(2,6,9) + .compat_ioctl = radeon_ms_compat_ioctl, +#endif + }, + .pci_driver = { + .name = DRIVER_NAME, + .id_table = pciidlist, + .probe = radeon_ms_driver_probe, + .remove = __devexit_p(drm_cleanup_pci), + }, +}; + +static int radeon_ms_driver_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + return drm_get_dev(pdev, ent, &driver); +} + +static int radeon_ms_driver_dri_library_name(struct drm_device * dev, + char * buf) +{ + struct drm_radeon_private *dev_priv = dev->dev_private; + int ret; + + switch (dev_priv->family) { + default: + ret = snprintf(buf, PAGE_SIZE, "\n"); + } + return ret; +} + +static void __exit radeon_ms_driver_exit(void) +{ + drm_exit(&driver); +} + +static int __init radeon_ms_driver_init(void) +{ + driver.num_ioctls = radeon_ms_num_ioctls; + driver.driver_features |= DRIVER_MODESET; + return drm_init(&driver, pciidlist); +} + +module_init(radeon_ms_driver_init); +module_exit(radeon_ms_driver_exit); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL and additional rights"); diff --git a/linux-core/radeon_ms_drv.h b/linux-core/radeon_ms_drv.h new file mode 100644 index 00000000..b80ed442 --- /dev/null +++ b/linux-core/radeon_ms_drv.h @@ -0,0 +1,46 @@ +/* + * Copyright 2007 Dave Airlie + * Copyright 2007 Alex Deucher + * Copyright 2007 Michel Dänzer + * Copyright 2007 Roland Scheidegger + * Copyright 2007 Vladimir Dergachev + * Copyright 2007 Nicolai Haehnle + * Copyright 2007 Aapo Tahkola + * Copyright 2007 Ben Skeggs + * Copyright 2007 Jérôme Glisse + * All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + */ +/* + * Authors: + * Jérôme Glisse <glisse@freedesktop.org> + */ +#ifndef __RADEON_MS_DRV_H__ +#define __RADEON_MS_DRV_H__ + +#include <linux/i2c.h> +#include <linux/i2c-id.h> +#include <linux/i2c-algo-bit.h> +#include <linux/pci.h> +#include "drm.h" +#include "drmP.h" + +#endif diff --git a/linux-core/radeon_ms_exec.c b/linux-core/radeon_ms_exec.c new file mode 120000 index 00000000..cb397fbf --- /dev/null +++ b/linux-core/radeon_ms_exec.c @@ -0,0 +1 @@ +../shared-core/radeon_ms_exec.c
\ No newline at end of file diff --git a/linux-core/radeon_ms_family.c b/linux-core/radeon_ms_family.c new file mode 120000 index 00000000..1f12e092 --- /dev/null +++ b/linux-core/radeon_ms_family.c @@ -0,0 +1 @@ +../shared-core/radeon_ms_family.c
\ No newline at end of file diff --git a/linux-core/radeon_ms_fb.c b/linux-core/radeon_ms_fb.c new file mode 100644 index 00000000..0ac9207c --- /dev/null +++ b/linux-core/radeon_ms_fb.c @@ -0,0 +1,462 @@ +/* + * Copyright © 2007 David Airlie + * Copyright © 2007 Jerome Glisse + * + * All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining + * a copy of this software and associated documentation files (the + * "Software"), to deal in the Software without restriction, including + * without limitation on the rights to use, copy, modify, merge, + * publish, distribute, sublicense, and/or sell copies of the Software, + * and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial + * portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NON-INFRINGEMENT. IN NO EVENT SHALL ATI, VA LINUX SYSTEMS AND/OR + * THEIR SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/tty.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/fb.h> +#include <linux/init.h> + +#include "drmP.h" +#include "drm.h" +#include "drm_crtc.h" +#include "radeon_ms.h" +#include "amd.h" + + +static int radeonfb_setcolreg(unsigned regno, unsigned red, + unsigned green, unsigned blue, + unsigned transp, struct fb_info *info) +{ + struct amd_fb *par = info->par; + struct drm_framebuffer *fb = par->fb; + struct drm_crtc *crtc = par->crtc; + + if (regno > 255) { + return 1; + } + // if (crtc->funcs->gamma_set) { + // crtc->funcs->gamma_set(crtc, red, green, blue, regno); + // } + if (regno < 16) { + switch (fb->depth) { + case 15: + fb->pseudo_palette[regno] = ((red & 0xf800) >> 1) | + ((green & 0xf800) >> 6) | + ((blue & 0xf800) >> 11); + break; + case 16: + fb->pseudo_palette[regno] = (red & 0xf800) | + ((green & 0xfc00) >> 5) | + ((blue & 0xf800) >> 11); + break; + case 24: + case 32: + fb->pseudo_palette[regno] = ((red & 0xff00) << 8) | + (green & 0xff00) | + ((blue & 0xff00) >> 8); + break; + } + } + return 0; +} + +static int radeonfb_check_var(struct fb_var_screeninfo *var, + struct fb_info *info) +{ + struct amd_fb *par = info->par; + struct drm_framebuffer *fb = par->fb; + + if (!var->pixclock) + return -EINVAL; + + /* Need to resize the fb object !!! */ + if (var->xres > fb->width || var->yres > fb->height) { + DRM_ERROR("Requested width/height is greater than " + "current fb object %dx%d > %dx%d\n", + var->xres, var->yres, fb->width, fb->height); + DRM_ERROR("Need resizing code.\n"); + return -EINVAL; + } + + switch (var->bits_per_pixel) { + case 16: + if (var->green.length == 5) { + var->red.offset = 10; + var->green.offset = 5; + var->blue.offset = 0; + var->red.length = 5; + var->green.length = 5; + var->blue.length = 5; + var->transp.length = 0; + var->transp.offset = 0; + } else { + var->red.offset = 11; + var->green.offset = 6; + var->blue.offset = 0; + var->red.length = 5; + var->green.length = 6; + var->blue.length = 5; + var->transp.length = 0; + var->transp.offset = 0; + } + break; + case 32: + if (var->transp.length) { + var->red.offset = 16; + var->green.offset = 8; + var->blue.offset = 0; + var->red.length = 8; + var->green.length = 8; + var->blue.length = 8; + var->transp.length = 8; + var->transp.offset = 24; + } else { + var->red.offset = 16; + var->green.offset = 8; + var->blue.offset = 0; + var->red.length = 8; + var->green.length = 8; + var->blue.length = 8; + var->transp.length = 0; + var->transp.offset = 0; + } + break; + default: + return -EINVAL; + } + return 0; +} + +static bool radeonfb_mode_equal(struct drm_display_mode *mode1, + struct drm_display_mode *mode2) +{ + if (mode1->hdisplay == mode2->hdisplay && + mode1->hsync_start == mode2->hsync_start && + mode1->hsync_end == mode2->hsync_end && + mode1->htotal == mode2->htotal && + mode1->hskew == mode2->hskew && + mode1->vdisplay == mode2->vdisplay && + mode1->vsync_start == mode2->vsync_start && + mode1->vsync_end == mode2->vsync_end && + mode1->vtotal == mode2->vtotal && + mode1->vscan == mode2->vscan && + mode1->flags == mode2->flags) { + /* FIXME: what about adding a margin for clock ? */ + if (mode1->clock == mode2->clock) + return true; + return false; + } + + return false; +} + +static int radeonfb_set_par(struct fb_info *info) +{ + struct amd_fb *par = info->par; + struct drm_framebuffer *fb = par->fb; + struct drm_device *dev = par->dev; + struct drm_display_mode *drm_mode, *search_mode; + struct drm_output *output; + struct fb_var_screeninfo *var = &info->var; + int found = 0; + + switch (var->bits_per_pixel) { + case 16: + fb->depth = (var->green.length == 6) ? 16 : 15; + break; + case 32: + fb->depth = (var->transp.length > 0) ? 32 : 24; + break; + default: + return -EINVAL; + } + fb->bits_per_pixel = var->bits_per_pixel; + + info->fix.line_length = fb->pitch; + info->fix.smem_len = info->fix.line_length * fb->height; + info->fix.visual = FB_VISUAL_TRUECOLOR; + info->screen_size = info->fix.smem_len; /* ??? */ + + /* Should we walk the output's modelist or just create our own ??? + * For now, we create and destroy a mode based on the incoming + * parameters. But there's commented out code below which scans + * the output list too. + */ + drm_mode = drm_mode_create(dev); + drm_mode->hdisplay = var->xres; + drm_mode->hsync_start = drm_mode->hdisplay + var->right_margin; + drm_mode->hsync_end = drm_mode->hsync_start + var->hsync_len; + drm_mode->htotal = drm_mode->hsync_end + var->left_margin; + drm_mode->vdisplay = var->yres; + drm_mode->vsync_start = drm_mode->vdisplay + var->lower_margin; + drm_mode->vsync_end = drm_mode->vsync_start + var->vsync_len; + drm_mode->vtotal = drm_mode->vsync_end + var->upper_margin; + drm_mode->clock = PICOS2KHZ(var->pixclock); + drm_mode->vrefresh = drm_mode_vrefresh(drm_mode); + drm_mode_set_name(drm_mode); + drm_mode_set_crtcinfo(drm_mode, CRTC_INTERLACE_HALVE_V); + + list_for_each_entry(output, &dev->mode_config.output_list, head) { + if (output->crtc == par->crtc) + break; + } + + drm_mode_debug_printmodeline(drm_mode); + list_for_each_entry(search_mode, &output->modes, head) { + drm_mode_debug_printmodeline(search_mode); + if (radeonfb_mode_equal(drm_mode, search_mode)) { + drm_mode_destroy(dev, drm_mode); + drm_mode = search_mode; + found = 1; + break; + } + } + + if (!found) { + if (par->fb_mode) { + drm_mode_detachmode_crtc(dev, par->fb_mode); + } + par->fb_mode = drm_mode; + drm_mode_debug_printmodeline(drm_mode); + /* attach mode */ + drm_mode_attachmode_crtc(dev, par->crtc, par->fb_mode); + } + + if (par->crtc->enabled) { + if (!drm_mode_equal(&par->crtc->mode, drm_mode) || + par->crtc->fb != par->fb) { + par->crtc->fb = par->fb; + if (!drm_crtc_set_mode(par->crtc, drm_mode, 0, 0)) { + return -EINVAL; + } + } + } + + return 0; +} + +static struct fb_ops radeonfb_ops = { + .owner = THIS_MODULE, + // .fb_open = radeonfb_open, + // .fb_read = radeonfb_read, + // .fb_write = radeonfb_write, + // .fb_release = radeonfb_release, + // .fb_ioctl = radeonfb_ioctl, + .fb_check_var = radeonfb_check_var, + .fb_set_par = radeonfb_set_par, + .fb_setcolreg = radeonfb_setcolreg, + .fb_fillrect = cfb_fillrect, + .fb_copyarea = cfb_copyarea, + .fb_imageblit = cfb_imageblit, +}; + +int radeonfb_probe(struct drm_device *dev, struct drm_crtc *crtc, struct drm_output *output) +{ + struct drm_radeon_private *dev_priv = dev->dev_private; + struct fb_info *info; + struct amd_fb *par; + struct device *device = &dev->pdev->dev; + struct drm_framebuffer *fb; + struct drm_display_mode *mode = crtc->desired_mode; + int ret; + + info = framebuffer_alloc(sizeof(struct amd_fb), device); + if (!info){ + DRM_INFO("[radeon_ms] framebuffer_alloc failed\n"); + return -EINVAL; + } + + fb = drm_framebuffer_create(dev); + if (!fb) { + framebuffer_release(info); + DRM_ERROR("[radeon_ms] failed to allocate fb.\n"); + return -EINVAL; + } + crtc->fb = fb; + + fb->width = crtc->desired_mode->hdisplay; + fb->height = crtc->desired_mode->vdisplay; + fb->bits_per_pixel = 32; + fb->pitch = fb->width * ((fb->bits_per_pixel + 1) / 8); + fb->depth = 24; + /* one page alignment should be fine for constraint (micro|macro tiling, + * bit depth, color buffer offset, ...) */ + ret = drm_buffer_object_create(dev, fb->width * fb->height * 4, + drm_bo_type_kernel, + DRM_BO_FLAG_READ | + DRM_BO_FLAG_WRITE | + DRM_BO_FLAG_NO_EVICT | + DRM_BO_FLAG_MEM_VRAM, + DRM_BO_HINT_DONT_FENCE, + 1, + 0, + &fb->bo); + if (ret || fb->bo == NULL) { + DRM_ERROR("[radeon_ms] failed to allocate framebuffer\n"); + drm_framebuffer_destroy(fb); + framebuffer_release(info); + return -EINVAL; + } + + DRM_INFO("[radeon_ms] framebuffer %dx%d at 0x%08lX\n", + fb->width, fb->height, fb->bo->offset); + + fb->fbdev = info; + par = info->par; + dev_priv->fb = par; + par->dev = dev; + par->crtc = crtc; + par->fb = fb; + info->fbops = &radeonfb_ops; + strcpy(info->fix.id, "radeonfb"); + info->fix.type = FB_TYPE_PACKED_PIXELS; + info->fix.visual = FB_VISUAL_TRUECOLOR; + info->fix.type_aux = 0; + info->fix.xpanstep = 8; + info->fix.ypanstep = 1; + info->fix.ywrapstep = 0; + info->fix.accel = FB_ACCEL_ATI_RADEON; + info->fix.type_aux = 0; + info->fix.mmio_start = 0; + info->fix.mmio_len = 0; + info->fix.line_length = fb->pitch; + info->fix.smem_start = fb->bo->offset + dev->mode_config.fb_base; + info->fix.smem_len = info->fix.line_length * fb->height; + info->flags = FBINFO_DEFAULT; + DRM_INFO("[radeon_ms] fb physical start : 0x%lX\n", info->fix.smem_start); + DRM_INFO("[radeon_ms] fb physical size : %d\n", info->fix.smem_len); + + ret = drm_bo_kmap(fb->bo, 0, fb->bo->num_pages, &fb->kmap); + if (ret) { + DRM_ERROR("error mapping fb: %d\n", ret); + } + info->screen_base = fb->kmap.virtual; + info->screen_size = info->fix.smem_len; /* FIXME */ + info->pseudo_palette = fb->pseudo_palette; + info->var.xres_virtual = fb->width; + info->var.yres_virtual = fb->height; + info->var.bits_per_pixel = fb->bits_per_pixel; + info->var.xoffset = 0; + info->var.yoffset = 0; + info->var.activate = FB_ACTIVATE_NOW; + info->var.height = -1; + info->var.width = -1; + info->var.vmode = FB_VMODE_NONINTERLACED; + + info->var.xres = mode->hdisplay; + info->var.right_margin = mode->hsync_start - mode->hdisplay; + info->var.hsync_len = mode->hsync_end - mode->hsync_start; + info->var.left_margin = mode->htotal - mode->hsync_end; + info->var.yres = mode->vdisplay; + info->var.lower_margin = mode->vsync_start - mode->vdisplay; + info->var.vsync_len = mode->vsync_end - mode->vsync_start; + info->var.upper_margin = mode->vtotal - mode->vsync_end; + info->var.pixclock = 10000000 / mode->htotal * 1000 / + mode->vtotal * 100; + /* avoid overflow */ + info->var.pixclock = info->var.pixclock * 1000 / mode->vrefresh; + + info->pixmap.size = 64*1024; + info->pixmap.buf_align = 8; + info->pixmap.access_align = 32; + info->pixmap.flags = FB_PIXMAP_SYSTEM; + info->pixmap.scan_align = 1; + + DRM_DEBUG("fb depth is %d\n", fb->depth); + DRM_DEBUG(" pitch is %d\n", fb->pitch); + switch(fb->depth) { + case 15: + info->var.red.offset = 10; + info->var.green.offset = 5; + info->var.blue.offset = 0; + info->var.red.length = info->var.green.length = + info->var.blue.length = 5; + info->var.transp.offset = 15; + info->var.transp.length = 1; + break; + case 16: + info->var.red.offset = 11; + info->var.green.offset = 5; + info->var.blue.offset = 0; + info->var.red.length = 5; + info->var.green.length = 6; + info->var.blue.length = 5; + info->var.transp.offset = 0; + break; + case 24: + info->var.red.offset = 16; + info->var.green.offset = 8; + info->var.blue.offset = 0; + info->var.red.length = info->var.green.length = + info->var.blue.length = 8; + info->var.transp.offset = 0; + info->var.transp.length = 0; + break; + case 32: + info->var.red.offset = 16; + info->var.green.offset = 8; + info->var.blue.offset = 0; + info->var.red.length = info->var.green.length = + info->var.blue.length = 8; + info->var.transp.offset = 24; + info->var.transp.length = 8; + break; + default: + DRM_ERROR("only support 15, 16, 24 or 32bits per pixel " + "got %d\n", fb->depth); + return -EINVAL; + break; + } + + if (register_framebuffer(info) < 0) { + return -EINVAL; + } + + DRM_INFO("[radeon_ms] fb%d: %s frame buffer device\n", info->node, + info->fix.id); + return 0; +} +EXPORT_SYMBOL(radeonfb_probe); + +int radeonfb_remove(struct drm_device *dev, struct drm_framebuffer *kern_fb) +{ + struct drm_radeon_private *dev_priv = dev->dev_private; + struct amd_fb *fb = dev_priv->fb; + struct fb_info *info; + + if (fb == NULL || fb->fb == NULL || fb->fb->fbdev == NULL) { + DRM_INFO("[radeon_ms] %s: no crtc, or fb or fbdev\n", + __func__); + return 0; + } + info = fb->fb->fbdev; + unregister_framebuffer(info); + drm_bo_kunmap(&fb->fb->kmap); + drm_bo_usage_deref_unlocked(&fb->fb->bo); + drm_framebuffer_destroy(fb->fb); + framebuffer_release(info); + dev_priv->fb = NULL; + return 0; +} +EXPORT_SYMBOL(radeonfb_remove); +MODULE_LICENSE("GPL"); diff --git a/linux-core/radeon_ms_fence.c b/linux-core/radeon_ms_fence.c new file mode 120000 index 00000000..383cc070 --- /dev/null +++ b/linux-core/radeon_ms_fence.c @@ -0,0 +1 @@ +../shared-core/radeon_ms_fence.c
\ No newline at end of file diff --git a/linux-core/radeon_ms_gpu.c b/linux-core/radeon_ms_gpu.c new file mode 120000 index 00000000..fa5e05bf --- /dev/null +++ b/linux-core/radeon_ms_gpu.c @@ -0,0 +1 @@ +../shared-core/radeon_ms_gpu.c
\ No newline at end of file diff --git a/linux-core/radeon_ms_i2c.c b/linux-core/radeon_ms_i2c.c new file mode 120000 index 00000000..1863e6d6 --- /dev/null +++ b/linux-core/radeon_ms_i2c.c @@ -0,0 +1 @@ +../shared-core/radeon_ms_i2c.c
\ No newline at end of file diff --git a/linux-core/radeon_ms_irq.c b/linux-core/radeon_ms_irq.c new file mode 120000 index 00000000..c4e60ba6 --- /dev/null +++ b/linux-core/radeon_ms_irq.c @@ -0,0 +1 @@ +../shared-core/radeon_ms_irq.c
\ No newline at end of file diff --git a/linux-core/radeon_ms_output.c b/linux-core/radeon_ms_output.c new file mode 120000 index 00000000..6a38b671 --- /dev/null +++ b/linux-core/radeon_ms_output.c @@ -0,0 +1 @@ +../shared-core/radeon_ms_output.c
\ No newline at end of file diff --git a/linux-core/radeon_ms_properties.c b/linux-core/radeon_ms_properties.c new file mode 120000 index 00000000..e2e0dc0b --- /dev/null +++ b/linux-core/radeon_ms_properties.c @@ -0,0 +1 @@ +../shared-core/radeon_ms_properties.c
\ No newline at end of file diff --git a/linux-core/radeon_ms_properties.h b/linux-core/radeon_ms_properties.h new file mode 120000 index 00000000..59783e89 --- /dev/null +++ b/linux-core/radeon_ms_properties.h @@ -0,0 +1 @@ +../shared-core/radeon_ms_properties.h
\ No newline at end of file diff --git a/linux-core/radeon_ms_reg.h b/linux-core/radeon_ms_reg.h new file mode 120000 index 00000000..24b01b42 --- /dev/null +++ b/linux-core/radeon_ms_reg.h @@ -0,0 +1 @@ +../shared-core/radeon_ms_reg.h
\ No newline at end of file diff --git a/linux-core/radeon_ms_rom.c b/linux-core/radeon_ms_rom.c new file mode 120000 index 00000000..80f5f606 --- /dev/null +++ b/linux-core/radeon_ms_rom.c @@ -0,0 +1 @@ +../shared-core/radeon_ms_rom.c
\ No newline at end of file diff --git a/linux-core/radeon_ms_rom.h b/linux-core/radeon_ms_rom.h new file mode 120000 index 00000000..f20e42be --- /dev/null +++ b/linux-core/radeon_ms_rom.h @@ -0,0 +1 @@ +../shared-core/radeon_ms_rom.h
\ No newline at end of file diff --git a/linux-core/radeon_ms_state.c b/linux-core/radeon_ms_state.c new file mode 120000 index 00000000..2d2e2ef7 --- /dev/null +++ b/linux-core/radeon_ms_state.c @@ -0,0 +1 @@ +../shared-core/radeon_ms_state.c
\ No newline at end of file diff --git a/linux-core/via_fence.c b/linux-core/via_fence.c index 3a680a32..6473e701 100644 --- a/linux-core/via_fence.c +++ b/linux-core/via_fence.c @@ -63,7 +63,7 @@ static void via_fence_poll(struct drm_device *dev, uint32_t class, if (!dev_priv->have_idlelock) { - drm_idlelock_take(&dev->lock); + drm_idlelock_take(&dev->primary->master->lock); dev_priv->have_idlelock = 1; } @@ -89,7 +89,7 @@ static void via_fence_poll(struct drm_device *dev, uint32_t class, if (signaled_flush_types) { waiting_types &= ~signaled_flush_types; if (!waiting_types && dev_priv->have_idlelock) { - drm_idlelock_release(&dev->lock); + drm_idlelock_release(&dev->primary->master->lock); dev_priv->have_idlelock = 0; } drm_fence_handler(dev, 0, dev_priv->emit_0_sequence, |