diff options
Diffstat (limited to 'linux-core')
| -rw-r--r-- | linux-core/ObjectID.h | 36 | ||||
| -rw-r--r-- | linux-core/atombios.h | 803 |
2 files changed, 700 insertions, 139 deletions
diff --git a/linux-core/ObjectID.h b/linux-core/ObjectID.h index 4b106cf6..f1f18a48 100644 --- a/linux-core/ObjectID.h +++ b/linux-core/ObjectID.h @@ -78,6 +78,10 @@ #define ENCODER_OBJECT_ID_DP_DP501 0x1D #define ENCODER_OBJECT_ID_INTERNAL_UNIPHY 0x1E #define ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA 0x1F +#define ENCODER_OBJECT_ID_INTERNAL_UNIPHY1 0x20 +#define ENCODER_OBJECT_ID_INTERNAL_UNIPHY2 0x21 + +#define ENCODER_OBJECT_ID_GENERAL_EXTERNAL_DVO 0xFF /****************************************************/ /* Connector Object ID Definition */ @@ -118,6 +122,8 @@ #define GRAPH_OBJECT_ENUM_ID2 0x02 #define GRAPH_OBJECT_ENUM_ID3 0x03 #define GRAPH_OBJECT_ENUM_ID4 0x04 +#define GRAPH_OBJECT_ENUM_ID5 0x05 +#define GRAPH_OBJECT_ENUM_ID6 0x06 /****************************************************/ /* Graphics Object ID Bit definition */ @@ -173,7 +179,7 @@ #define ENCODER_SI178_ENUM_ID1 0x2117 #define ENCODER_MVPU_FPGA_ENUM_ID1 0x2118 #define ENCODER_INTERNAL_DDI_ENUM_ID1 0x2119 -#define ENCODER_VT1625_ENUM_ID1 0x211A +#define ENCODER_VT1625_ENUM_ID1 0x211A #define ENCODER_HDMI_SI1932_ENUM_ID1 0x211B #define ENCODER_ENCODER_DP_AN9801_ENUM_ID1 0x211C #define ENCODER_DP_DP501_ENUM_ID1 0x211D @@ -323,6 +329,26 @@ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA << OBJECT_ID_SHIFT) +#define ENCODER_INTERNAL_UNIPHY1_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + ENCODER_OBJECT_ID_INTERNAL_UNIPHY1 << OBJECT_ID_SHIFT) + +#define ENCODER_INTERNAL_UNIPHY1_ENUM_ID2 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\ + ENCODER_OBJECT_ID_INTERNAL_UNIPHY1 << OBJECT_ID_SHIFT) + +#define ENCODER_INTERNAL_UNIPHY2_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + ENCODER_OBJECT_ID_INTERNAL_UNIPHY2 << OBJECT_ID_SHIFT) + +#define ENCODER_INTERNAL_UNIPHY2_ENUM_ID2 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\ + ENCODER_OBJECT_ID_INTERNAL_UNIPHY2 << OBJECT_ID_SHIFT) + +#define ENCODER_GENERAL_EXTERNAL_DVO_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\ + ENCODER_OBJECT_ID_GENERAL_EXTERNAL_DVO << OBJECT_ID_SHIFT) + /****************************************************/ /* Connector Object ID definition - Shared with BIOS */ /****************************************************/ @@ -453,6 +479,14 @@ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\ CONNECTOR_OBJECT_ID_DISPLAYPORT << OBJECT_ID_SHIFT) +#define CONNECTOR_DISPLAYPORT_ENUM_ID3 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID3 << ENUM_ID_SHIFT |\ + CONNECTOR_OBJECT_ID_DISPLAYPORT << OBJECT_ID_SHIFT) + +#define CONNECTOR_DISPLAYPORT_ENUM_ID4 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\ + GRAPH_OBJECT_ENUM_ID4 << ENUM_ID_SHIFT |\ + CONNECTOR_OBJECT_ID_DISPLAYPORT << OBJECT_ID_SHIFT) + /****************************************************/ /* Router Object ID definition - Shared with BIOS */ /****************************************************/ diff --git a/linux-core/atombios.h b/linux-core/atombios.h index 2e7dc6c2..9932b096 100644 --- a/linux-core/atombios.h +++ b/linux-core/atombios.h @@ -266,7 +266,7 @@ typedef struct _ATOM_MASTER_LIST_OF_COMMAND_TABLES{ USHORT SetCRTC_UsingDTDTiming; //Atomic Table, directly used by various SW components,latest version 1.1 USHORT ExternalEncoderControl; //Atomic Table, directly used by various SW components,latest version 2.1 USHORT LVTMAOutputControl; //Atomic Table, directly used by various SW components,latest version 1.1 - USHORT VRAM_BlockDetectionByStrap; + USHORT VRAM_BlockDetectionByStrap; //Atomic Table, used only by Bios USHORT MemoryCleanUp; //Atomic Table, only used by Bios USHORT ProcessI2cChannelTransaction; //Function Table,only used by Bios USHORT WriteOneByteToHWAssistedI2C; //Function Table,indirectly used by various SW components @@ -276,9 +276,9 @@ typedef struct _ATOM_MASTER_LIST_OF_COMMAND_TABLES{ USHORT MC_Synchronization; //Atomic Table, indirectly used by various SW components,called from SetMemoryClock USHORT ComputeMemoryEnginePLL; //Atomic Table, indirectly used by various SW components,called from SetMemory/EngineClock USHORT MemoryRefreshConversion; //Atomic Table, indirectly used by various SW components,called from SetMemory or SetEngineClock - USHORT VRAM_GetCurrentInfoBlock; + USHORT VRAM_GetCurrentInfoBlock; //Atomic Table, used only by Bios USHORT DynamicMemorySettings; //Atomic Table, indirectly used by various SW components,called from SetMemoryClock - USHORT MemoryTraining; + USHORT MemoryTraining; //Atomic Table, used only by Bios USHORT EnableSpreadSpectrumOnPPLL; //Atomic Table, directly used by various SW components,latest version 1.2 USHORT TMDSAOutputControl; //Atomic Table, directly used by various SW components,latest version 1.1 USHORT SetVoltage; //Function Table,directly and/or indirectly used by various SW components,latest version 1.1 @@ -296,11 +296,12 @@ typedef struct _ATOM_MASTER_LIST_OF_COMMAND_TABLES{ USHORT DPEncoderService; //Function Table,only used by Bios }ATOM_MASTER_LIST_OF_COMMAND_TABLES; +// For backward compatible #define ReadEDIDFromHWAssistedI2C ProcessI2cChannelTransaction - #define UNIPHYTransmitterControl DIG1TransmitterControl #define LVTMATransmitterControl DIG2TransmitterControl -#define SetCRTC_DPM_State GetConditionalGoldenSetting +#define SetCRTC_DPM_State GetConditionalGoldenSetting +#define SetUniphyInstance ASIC_StaticPwrMgtStatusChange typedef struct _ATOM_MASTER_COMMAND_TABLE { @@ -308,6 +309,9 @@ typedef struct _ATOM_MASTER_COMMAND_TABLE ATOM_MASTER_LIST_OF_COMMAND_TABLES ListOfCommandTables; }ATOM_MASTER_COMMAND_TABLE; +/****************************************************************************/ +// Structures used in every command table +/****************************************************************************/ typedef struct _ATOM_TABLE_ATTRIBUTE { #if ATOM_BIG_ENDIAN @@ -327,23 +331,20 @@ typedef union _ATOM_TABLE_ATTRIBUTE_ACCESS USHORT susAccess; }ATOM_TABLE_ATTRIBUTE_ACCESS; +/****************************************************************************/ // Common header for all command tables. -//Every table pointed by _ATOM_MASTER_COMMAND_TABLE has this common header. -//And the pointer actually points to this header. - +// Every table pointed by _ATOM_MASTER_COMMAND_TABLE has this common header. +// And the pointer actually points to this header. +/****************************************************************************/ typedef struct _ATOM_COMMON_ROM_COMMAND_TABLE_HEADER { ATOM_COMMON_TABLE_HEADER CommonHeader; ATOM_TABLE_ATTRIBUTE TableAttribute; }ATOM_COMMON_ROM_COMMAND_TABLE_HEADER; - -typedef struct _ASIC_INIT_PARAMETERS -{ - ULONG ulDefaultEngineClock; //In 10Khz unit - ULONG ulDefaultMemoryClock; //In 10Khz unit -}ASIC_INIT_PARAMETERS; - +/****************************************************************************/ +// Structures used by ComputeMemoryEnginePLLTable +/****************************************************************************/ #define COMPUTE_MEMORY_PLL_PARAM 1 #define COMPUTE_ENGINE_PLL_PARAM 2 @@ -380,6 +381,57 @@ typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V2 #define b3FIRST_TIME_CHANGE_CLOCK 0x08 //Applicable to both memory and engine clock change,when set, it means this is 1st time to change clock after ASIC bootup #define b3SKIP_SW_PROGRAM_PLL 0x10 //Applicable to both memory and engine clock change, when set, it means the table will not program SPLL/MPLL +typedef struct _ATOM_COMPUTE_CLOCK_FREQ +{ +#if ATOM_BIG_ENDIAN + ULONG ulComputeClockFlag:8; // =1: COMPUTE_MEMORY_PLL_PARAM, =2: COMPUTE_ENGINE_PLL_PARAM + ULONG ulClockFreq:24; // in unit of 10kHz +#else + ULONG ulClockFreq:24; // in unit of 10kHz + ULONG ulComputeClockFlag:8; // =1: COMPUTE_MEMORY_PLL_PARAM, =2: COMPUTE_ENGINE_PLL_PARAM +#endif +}ATOM_COMPUTE_CLOCK_FREQ; + +typedef struct _ATOM_S_MPLL_FB_DIVIDER +{ + USHORT usFbDivFrac; + USHORT usFbDiv; +}ATOM_S_MPLL_FB_DIVIDER; + +typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V3 +{ + union + { + ATOM_COMPUTE_CLOCK_FREQ ulClock; //Input Parameter + ATOM_S_MPLL_FB_DIVIDER ulFbDiv; //Output Parameter + }; + UCHAR ucRefDiv; //Output Parameter + UCHAR ucPostDiv; //Output Parameter + UCHAR ucCntlFlag; //Output Parameter + UCHAR ucReserved; +}COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V3; + +// ucCntlFlag +#define ATOM_PLL_CNTL_FLAG_PLL_POST_DIV_EN 1 +#define ATOM_PLL_CNTL_FLAG_MPLL_VCO_MODE 2 +#define ATOM_PLL_CNTL_FLAG_FRACTION_DISABLE 4 + +typedef struct _DYNAMICE_MEMORY_SETTINGS_PARAMETER +{ + ATOM_COMPUTE_CLOCK_FREQ ulClock; + ULONG ulReserved[2]; +}DYNAMICE_MEMORY_SETTINGS_PARAMETER; + +typedef struct _DYNAMICE_ENGINE_SETTINGS_PARAMETER +{ + ATOM_COMPUTE_CLOCK_FREQ ulClock; + ULONG ulMemoryClock; + ULONG ulReserved; +}DYNAMICE_ENGINE_SETTINGS_PARAMETER; + +/****************************************************************************/ +// Structures used by SetEngineClockTable +/****************************************************************************/ typedef struct _SET_ENGINE_CLOCK_PARAMETERS { ULONG ulTargetEngineClock; //In 10Khz unit @@ -391,7 +443,9 @@ typedef struct _SET_ENGINE_CLOCK_PS_ALLOCATION COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_PS_ALLOCATION sReserved; }SET_ENGINE_CLOCK_PS_ALLOCATION; - +/****************************************************************************/ +// Structures used by SetMemoryClockTable +/****************************************************************************/ typedef struct _SET_MEMORY_CLOCK_PARAMETERS { ULONG ulTargetMemoryClock; //In 10Khz unit @@ -403,13 +457,24 @@ typedef struct _SET_MEMORY_CLOCK_PS_ALLOCATION COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_PS_ALLOCATION sReserved; }SET_MEMORY_CLOCK_PS_ALLOCATION; +/****************************************************************************/ +// Structures used by ASIC_Init.ctb +/****************************************************************************/ +typedef struct _ASIC_INIT_PARAMETERS +{ + ULONG ulDefaultEngineClock; //In 10Khz unit + ULONG ulDefaultMemoryClock; //In 10Khz unit +}ASIC_INIT_PARAMETERS; + typedef struct _ASIC_INIT_PS_ALLOCATION { ASIC_INIT_PARAMETERS sASICInitClocks; SET_ENGINE_CLOCK_PS_ALLOCATION sReserved; //Caller doesn't need to init this structure }ASIC_INIT_PS_ALLOCATION; - +/****************************************************************************/ +// Structure used by DynamicClockGatingTable.ctb +/****************************************************************************/ typedef struct _DYNAMIC_CLOCK_GATING_PARAMETERS { UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE @@ -417,7 +482,9 @@ typedef struct _DYNAMIC_CLOCK_GATING_PARAMETERS }DYNAMIC_CLOCK_GATING_PARAMETERS; #define DYNAMIC_CLOCK_GATING_PS_ALLOCATION DYNAMIC_CLOCK_GATING_PARAMETERS - +/****************************************************************************/ +// Structure used by EnableASIC_StaticPwrMgtTable.ctb +/****************************************************************************/ typedef struct _ENABLE_ASIC_STATIC_PWR_MGT_PARAMETERS { UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE @@ -425,7 +492,9 @@ typedef struct _ENABLE_ASIC_STATIC_PWR_MGT_PARAMETERS }ENABLE_ASIC_STATIC_PWR_MGT_PARAMETERS; #define ENABLE_ASIC_STATIC_PWR_MGT_PS_ALLOCATION ENABLE_ASIC_STATIC_PWR_MGT_PARAMETERS - +/****************************************************************************/ +// Structures used by DAC_LoadDetectionTable.ctb +/****************************************************************************/ typedef struct _DAC_LOAD_DETECTION_PARAMETERS { USHORT usDeviceID; //{ATOM_DEVICE_CRTx_SUPPORT,ATOM_DEVICE_TVx_SUPPORT,ATOM_DEVICE_CVx_SUPPORT} @@ -436,14 +505,15 @@ typedef struct _DAC_LOAD_DETECTION_PARAMETERS // DAC_LOAD_DETECTION_PARAMETERS.ucMisc #define DAC_LOAD_MISC_YPrPb 0x01 - typedef struct _DAC_LOAD_DETECTION_PS_ALLOCATION { DAC_LOAD_DETECTION_PARAMETERS sDacload; ULONG Reserved[2];// Don't set this one, allocation for EXT DAC }DAC_LOAD_DETECTION_PS_ALLOCATION; - +/****************************************************************************/ +// Structures used by DAC1EncoderControlTable.ctb and DAC2EncoderControlTable.ctb +/****************************************************************************/ typedef struct _DAC_ENCODER_CONTROL_PARAMETERS { USHORT usPixelClock; // in 10KHz; for bios convenient @@ -455,14 +525,11 @@ typedef struct _DAC_ENCODER_CONTROL_PARAMETERS #define DAC_ENCODER_CONTROL_PS_ALLOCATION DAC_ENCODER_CONTROL_PARAMETERS -typedef struct _TV_ENCODER_CONTROL_PARAMETERS -{ - USHORT usPixelClock; // in 10KHz; for bios convenient - UCHAR ucTvStandard; // See definition "ATOM_TV_NTSC ..." - UCHAR ucAction; // 0: turn off encoder - // 1: setup and turn on encoder -}TV_ENCODER_CONTROL_PARAMETERS; - +/****************************************************************************/ +// Structures used by DIG1EncoderControlTable +// DIG2EncoderControlTable +// ExternalEncoderControlTable +/****************************************************************************/ typedef struct _DIG_ENCODER_CONTROL_PARAMETERS { USHORT usPixelClock; // in 10KHz; for bios convenient @@ -487,7 +554,6 @@ typedef struct _DIG_ENCODER_CONTROL_PARAMETERS }DIG_ENCODER_CONTROL_PARAMETERS; #define DIG_ENCODER_CONTROL_PS_ALLOCATION DIG_ENCODER_CONTROL_PARAMETERS #define EXTERNAL_ENCODER_CONTROL_PARAMETER DIG_ENCODER_CONTROL_PARAMETERS -#define EXTERNAL_ENCODER_CONTROL_PS_ALLOCATION DIG_ENCODER_CONTROL_PS_ALLOCATION //ucConfig #define ATOM_ENCODER_CONFIG_DPLINKRATE_MASK 0x01 @@ -518,6 +584,56 @@ typedef struct _DIG_ENCODER_CONTROL_PARAMETERS #define ATOM_ENCODER_MODE_CV 14 #define ATOM_ENCODER_MODE_CRT 15 +typedef struct _ATOM_DIG_ENCODER_CONFIG_V2 +{ +#if ATOM_BIG_ENDIAN + UCHAR ucReserved1:2; + UCHAR ucTransmitterSel:2; // =0: UniphyAB, =1: UniphyCD =2: UniphyEF + UCHAR ucLinkSel:1; // =0: linkA/C/E =1: linkB/D/F + UCHAR ucReserved:1; + UCHAR ucDPLinkRate:1; // =0: 1.62Ghz, =1: 2.7Ghz +#else + UCHAR ucDPLinkRate:1; // =0: 1.62Ghz, =1: 2.7Ghz + UCHAR ucReserved:1; + UCHAR ucLinkSel:1; // =0: linkA/C/E =1: linkB/D/F + UCHAR ucTransmitterSel:2; // =0: UniphyAB, =1: UniphyCD =2: UniphyEF + UCHAR ucReserved1:2; +#endif +}ATOM_DIG_ENCODER_CONFIG_V2; + + +typedef struct _DIG_ENCODER_CONTROL_PARAMETERS_V2 +{ + USHORT usPixelClock; // in 10KHz; for bios convenient + ATOM_DIG_ENCODER_CONFIG_V2 acConfig; + UCHAR ucAction; + UCHAR ucEncoderMode; + // =0: DP encoder + // =1: LVDS encoder + // =2: DVI encoder + // =3: HDMI encoder + // =4: SDVO encoder + UCHAR ucLaneNum; // how many lanes to enable + UCHAR ucReserved[2]; +}DIG_ENCODER_CONTROL_PARAMETERS_V2; + +//ucConfig +#define ATOM_ENCODER_CONFIG_V2_DPLINKRATE_MASK 0x01 +#define ATOM_ENCODER_CONFIG_V2_DPLINKRATE_1_62GHZ 0x00 +#define ATOM_ENCODER_CONFIG_V2_DPLINKRATE_2_70GHZ 0x01 +#define ATOM_ENCODER_CONFIG_V2_LINK_SEL_MASK 0x04 +#define ATOM_ENCODER_CONFIG_V2_LINKA 0x00 +#define ATOM_ENCODER_CONFIG_V2_LINKB 0x04 +#define ATOM_ENCODER_CONFIG_V2_TRANSMITTER_SEL_MASK 0x18 +#define ATOM_ENCODER_CONFIG_V2_TRANSMITTER1 0x00 +#define ATOM_ENCODER_CONFIG_V2_TRANSMITTER2 0x08 +#define ATOM_ENCODER_CONFIG_V2_TRANSMITTER3 0x10 + +/****************************************************************************/ +// Structures used by UNIPHYTransmitterControlTable +// LVTMATransmitterControlTable +// DVOOutputControlTable +/****************************************************************************/ typedef struct _ATOM_DP_VS_MODE { UCHAR ucLaneSel; @@ -595,7 +711,82 @@ typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS #define ATOM_TRANSMITTER_ACTION_SETUP 10 #define ATOM_TRANSMITTER_ACTION_SETUP_VSEMPH 11 -/****************************Device Output Control Command Table Definitions**********************/ + +// Following are used for DigTransmitterControlTable ver1.2 +typedef struct _ATOM_DIG_TRANSMITTER_CONFIG_V2 +{ +#if ATOM_BIG_ENDIAN + UCHAR ucTransmitterSel:2; //bit7:6: =0 Dig Transmitter 1 ( Uniphy AB ) + // =1 Dig Transmitter 2 ( Uniphy CD ) + // =2 Dig Transmitter 3 ( Uniphy EF ) + UCHAR ucReserved:1; + UCHAR fDPConnector:1; //bit4=0: DP connector =1: None DP connector + UCHAR ucEncoderSel:1; //bit3=0: Data/Clk path source from DIGA( DIG inst0 ). =1: Data/clk path source from DIGB ( DIG inst1 ) + UCHAR ucLinkSel:1; //bit2=0: Uniphy LINKA or C or E when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is A or C or E + // =1: Uniphy LINKB or D or F when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is B or D or F + + UCHAR fCoherentMode:1; //bit1=1: Coherent Mode ( for DVI/HDMI mode ) + UCHAR fDualLinkConnector:1; //bit0=1: Dual Link DVI connector +#else + UCHAR fDualLinkConnector:1; //bit0=1: Dual Link DVI connector + UCHAR fCoherentMode:1; //bit1=1: Coherent Mode ( for DVI/HDMI mode ) + UCHAR ucLinkSel:1; //bit2=0: Uniphy LINKA or C or E when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is A or C or E + // =1: Uniphy LINKB or D or F when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is B or D or F + UCHAR ucEncoderSel:1; //bit3=0: Data/Clk path source from DIGA( DIG inst0 ). =1: Data/clk path source from DIGB ( DIG inst1 ) + UCHAR fDPConnector:1; //bit4=0: DP connector =1: None DP connector + UCHAR ucReserved:1; + UCHAR ucTransmitterSel:2; //bit7:6: =0 Dig Transmitter 1 ( Uniphy AB ) + // =1 Dig Transmitter 2 ( Uniphy CD ) + // =2 Dig Transmitter 3 ( Uniphy EF ) +#endif +}ATOM_DIG_TRANSMITTER_CONFIG_V2; + +//ucConfig +//Bit0 +#define ATOM_TRANSMITTER_CONFIG_V2_DUAL_LINK_CONNECTOR 0x01 + +//Bit1 +#define ATOM_TRANSMITTER_CONFIG_V2_COHERENT 0x02 + +//Bit2 +#define ATOM_TRANSMITTER_CONFIG_V2_LINK_SEL_MASK 0x04 +#define ATOM_TRANSMITTER_CONFIG_V2_LINKA 0x00 +#define ATOM_TRANSMITTER_CONFIG_V2_LINKB 0x04 + +// Bit3 +#define ATOM_TRANSMITTER_CONFIG_V2_ENCODER_SEL_MASK 0x08 +#define ATOM_TRANSMITTER_CONFIG_V2_DIG1_ENCODER 0x00 // only used when ucAction == ATOM_TRANSMITTER_ACTION_ENABLE or ATOM_TRANSMITTER_ACTION_SETUP +#define ATOM_TRANSMITTER_CONFIG_V2_DIG2_ENCODER 0x08 // only used when ucAction == ATOM_TRANSMITTER_ACTION_ENABLE or ATOM_TRANSMITTER_ACTION_SETUP + +// Bit4 +#define ATOM_TRASMITTER_CONFIG_V2_DP_CONNECTOR 0x10 + +// Bit7:6 +#define ATOM_TRANSMITTER_CONFIG_V2_TRANSMITTER_SEL_MASK 0xC0 +#define ATOM_TRANSMITTER_CONFIG_V2_TRANSMITTER1 0x00 //AB +#define ATOM_TRANSMITTER_CONFIG_V2_TRANSMITTER2 0x40 //CD +#define ATOM_TRANSMITTER_CONFIG_V2_TRANSMITTER3 0x80 //EF + +typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS_V2 +{ + union + { + USHORT usPixelClock; // in 10KHz; for bios convenient + USHORT usInitInfo; // when init uniphy,lower 8bit is used for connector type defined in objectid.h + ATOM_DP_VS_MODE asMode; // DP Voltage swing mode + }; + ATOM_DIG_TRANSMITTER_CONFIG_V2 acConfig; + UCHAR ucAction; // define as ATOM_TRANSMITER_ACTION_XXX + UCHAR ucReserved[4]; +}DIG_TRANSMITTER_CONTROL_PARAMETERS_V2; + + +/****************************************************************************/ +// Structures used by DAC1OuputControlTable +// DAC2OuputControlTable +// LVTMAOutputControlTable (Before DEC30) +// TMDSAOutputControlTable (Before DEC30) +/****************************************************************************/ typedef struct _DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS { UCHAR ucAction; // Possible input:ATOM_ENABLE||ATOMDISABLE @@ -634,7 +825,9 @@ typedef struct _DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS #define DVO_OUTPUT_CONTROL_PS_ALLOCATION DIG_TRANSMITTER_CONTROL_PS_ALLOCATION #define DVO_OUTPUT_CONTROL_PARAMETERS_V3 DIG_TRANSMITTER_CONTROL_PARAMETERS -/**************************************************************************/ +/****************************************************************************/ +// Structures used by BlankCRTCTable +/****************************************************************************/ typedef struct _BLANK_CRTC_PARAMETERS { UCHAR ucCRTC; // ATOM_CRTC1 or ATOM_CRTC2 @@ -645,7 +838,11 @@ typedef struct _BLANK_CRTC_PARAMETERS }BLANK_CRTC_PARAMETERS; #define BLANK_CRTC_PS_ALLOCATION BLANK_CRTC_PARAMETERS - +/****************************************************************************/ +// Structures used by EnableCRTCTable +// EnableCRTCMemReqTable +// UpdateCRTC_DoubleBufferRegistersTable +/****************************************************************************/ typedef struct _ENABLE_CRTC_PARAMETERS { UCHAR ucCRTC; // ATOM_CRTC1 or ATOM_CRTC2 @@ -654,7 +851,9 @@ typedef struct _ENABLE_CRTC_PARAMETERS }ENABLE_CRTC_PARAMETERS; #define ENABLE_CRTC_PS_ALLOCATION ENABLE_CRTC_PARAMETERS - +/****************************************************************************/ +// Structures used by SetCRTC_OverScanTable +/****************************************************************************/ typedef struct _SET_CRTC_OVERSCAN_PARAMETERS { USHORT usOverscanRight; // right @@ -666,7 +865,9 @@ typedef struct _SET_CRTC_OVERSCAN_PARAMETERS }SET_CRTC_OVERSCAN_PARAMETERS; #define SET_CRTC_OVERSCAN_PS_ALLOCATION SET_CRTC_OVERSCAN_PARAMETERS - +/****************************************************************************/ +// Structures used by SetCRTC_ReplicationTable +/****************************************************************************/ typedef struct _SET_CRTC_REPLICATION_PARAMETERS { UCHAR ucH_Replication; // horizontal replication @@ -676,7 +877,9 @@ typedef struct _SET_CRTC_REPLICATION_PARAMETERS }SET_CRTC_REPLICATION_PARAMETERS; #define SET_CRTC_REPLICATION_PS_ALLOCATION SET_CRTC_REPLICATION_PARAMETERS - +/****************************************************************************/ +// Structures used by SelectCRTC_SourceTable +/****************************************************************************/ typedef struct _SELECT_CRTC_SOURCE_PARAMETERS { UCHAR ucCRTC; // ATOM_CRTC1 or ATOM_CRTC2 @@ -713,6 +916,10 @@ typedef struct _SELECT_CRTC_SOURCE_PARAMETERS_V2 //#define ATOM_ENCODER_MODE_CV 14 //#define ATOM_ENCODER_MODE_CRT 15 +/****************************************************************************/ +// Structures used by SetPixelClockTable +// GetPixelClockTable +/****************************************************************************/ //Major revision=1., Minor revision=1 typedef struct _PIXEL_CLOCK_PARAMETERS { @@ -728,7 +935,6 @@ typedef struct _PIXEL_CLOCK_PARAMETERS UCHAR ucPadding; }PIXEL_CLOCK_PARAMETERS; - //Major revision=1., Minor revision=2, add ucMiscIfno //ucMiscInfo: #define MISC_FORCE_REPROG_PIXEL_CLOCK 0x1 @@ -799,6 +1005,9 @@ typedef struct _PIXEL_CLOCK_PARAMETERS_V3 #define PIXEL_CLOCK_PARAMETERS_LAST PIXEL_CLOCK_PARAMETERS_V2 #define GET_PIXEL_CLOCK_PS_ALLOCATION PIXEL_CLOCK_PARAMETERS_LAST +/****************************************************************************/ +// Structures used by AdjustDisplayPllTable +/****************************************************************************/ typedef struct _ADJUST_DISPLAY_PLL_PARAMETERS { USHORT usPixelClock; @@ -816,6 +1025,9 @@ typedef struct _ADJUST_DISPLAY_PLL_PARAMETERS #define ADJUST_DISPLAY_PLL_PS_ALLOCATION ADJUST_DISPLAY_PLL_PARAMETERS +/****************************************************************************/ +// Structures used by EnableYUVTable +/****************************************************************************/ typedef struct _ENABLE_YUV_PARAMETERS { UCHAR ucEnable; // ATOM_ENABLE:Enable YUV or ATOM_DISABLE:Disable YUV (RGB) @@ -824,20 +1036,27 @@ typedef struct _ENABLE_YUV_PARAMETERS }ENABLE_YUV_PARAMETERS; #define ENABLE_YUV_PS_ALLOCATION ENABLE_YUV_PARAMETERS +/****************************************************************************/ +// Structures used by GetMemoryClockTable +/****************************************************************************/ typedef struct _GET_MEMORY_CLOCK_PARAMETERS { ULONG ulReturnMemoryClock; // current memory speed in 10KHz unit } GET_MEMORY_CLOCK_PARAMETERS; #define GET_MEMORY_CLOCK_PS_ALLOCATION GET_MEMORY_CLOCK_PARAMETERS - +/****************************************************************************/ +// Structures used by GetEngineClockTable +/****************************************************************************/ typedef struct _GET_ENGINE_CLOCK_PARAMETERS { ULONG ulReturnEngineClock; // current engine speed in 10KHz unit } GET_ENGINE_CLOCK_PARAMETERS; #define GET_ENGINE_CLOCK_PS_ALLOCATION GET_ENGINE_CLOCK_PARAMETERS - +/****************************************************************************/ +// Following Structures and constant may be obsolete +/****************************************************************************/ //Maxium 8 bytes,the data read in will be placed in the parameter space. //Read operaion successeful when the paramter space is non-zero, otherwise read operation failed typedef struct _READ_EDID_FROM_HW_I2C_DATA_PARAMETERS @@ -887,6 +1106,9 @@ typedef struct _SET_UP_HW_I2C_DATA_PARAMETERS /**************************************************************************/ #define SPEED_FAN_CONTROL_PS_ALLOCATION WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS +/****************************************************************************/ +// Structures used by PowerConnectorDetectionTable +/****************************************************************************/ typedef struct _POWER_CONNECTOR_DETECTION_PARAMETERS { UCHAR ucPowerConnectorStatus; //Used for return value 0: detected, 1:not detected @@ -903,6 +1125,10 @@ typedef struct POWER_CONNECTOR_DETECTION_PS_ALLOCATION }POWER_CONNECTOR_DETECTION_PS_ALLOCATION; /****************************LVDS SS Command Table Definitions**********************/ + +/****************************************************************************/ +// Structures used by EnableSpreadSpectrumOnPPLLTable +/****************************************************************************/ typedef struct _ENABLE_LVDS_SS_PARAMETERS { USHORT usSpreadSpectrumPercentage; @@ -948,6 +1174,9 @@ typedef struct _SET_PIXEL_CLOCK_PS_ALLOCATION #define ENABLE_VGA_RENDER_PS_ALLOCATION SET_PIXEL_CLOCK_PS_ALLOCATION +/****************************************************************************/ +// Structures used by ### +/****************************************************************************/ typedef struct _MEMORY_TRAINING_PARAMETERS { ULONG ulTargetMemoryClock; //In 10Khz unit @@ -955,8 +1184,14 @@ typedef struct _MEMORY_TRAINING_PARAMETERS #define MEMORY_TRAINING_PS_ALLOCATION MEMORY_TRAINING_PARAMETERS - /****************************LVDS and other encoder command table definitions **********************/ + + +/****************************************************************************/ +// Structures used by LVDSEncoderControlTable (Before DCE30) +// LVTMAEncoderControlTable (Before DCE30) +// TMDSAEncoderControlTable (Before DCE30) +/****************************************************************************/ typedef struct _LVDS_ENCODER_CONTROL_PARAMETERS { USHORT usPixelClock; // in 10KHz; for bios convenient @@ -976,19 +1211,6 @@ typedef struct _LVDS_ENCODER_CONTROL_PARAMETERS #define TMDS2_ENCODER_CONTROL_PARAMETERS TMDS1_ENCODER_CONTROL_PARAMETERS #define TMDS2_ENCODER_CONTROL_PS_ALLOCATION TMDS2_ENCODER_CONTROL_PARAMETERS -typedef struct _ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS -{ - UCHAR ucEnable; // Enable or Disable External TMDS encoder - UCHAR ucMisc; // Bit0=0:Enable Single link;=1:Enable Dual link;Bit1 {=0:666RGB, =1:888RGB} - UCHAR ucPadding[2]; -}ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS; - -typedef struct _ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION -{ - ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS sXTmdsEncoder; - WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved; //Caller doesn't need to init this portion -}ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION; - //ucTableFormatRevision=1,ucTableContentRevision=2 typedef struct _LVDS_ENCODER_CONTROL_PARAMETERS_V2 @@ -1028,6 +1250,32 @@ typedef struct _LVDS_ENCODER_CONTROL_PARAMETERS_V2 #define TMDS2_ENCODER_CONTROL_PARAMETERS_V2 TMDS1_ENCODER_CONTROL_PARAMETERS_V2 #define TMDS2_ENCODER_CONTROL_PS_ALLOCATION_V2 TMDS2_ENCODER_CONTROL_PARAMETERS_V2 + +#define LVDS_ENCODER_CONTROL_PARAMETERS_V3 LVDS_ENCODER_CONTROL_PARAMETERS_V2 +#define LVDS_ENCODER_CONTROL_PS_ALLOCATION_V3 LVDS_ENCODER_CONTROL_PARAMETERS_V3 + +#define TMDS1_ENCODER_CONTROL_PARAMETERS_V3 LVDS_ENCODER_CONTROL_PARAMETERS_V3 +#define TMDS1_ENCODER_CONTROL_PS_ALLOCATION_V3 TMDS1_ENCODER_CONTROL_PARAMETERS_V3 + +#define TMDS2_ENCODER_CONTROL_PARAMETERS_V3 LVDS_ENCODER_CONTROL_PARAMETERS_V3 +#define TMDS2_ENCODER_CONTROL_PS_ALLOCATION_V3 TMDS2_ENCODER_CONTROL_PARAMETERS_V3 + +/****************************************************************************/ +// Structures used by ### +/****************************************************************************/ +typedef struct _ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS +{ + UCHAR ucEnable; // Enable or Disable External TMDS encoder + UCHAR ucMisc; // Bit0=0:Enable Single link;=1:Enable Dual link;Bit1 {=0:666RGB, =1:888RGB} + UCHAR ucPadding[2]; +}ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS; + +typedef struct _ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION +{ + ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS sXTmdsEncoder; + WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved; //Caller doesn't need to init this portion +}ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION; + #define ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS_V2 LVDS_ENCODER_CONTROL_PARAMETERS_V2 typedef struct _ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION_V2 @@ -1036,7 +1284,15 @@ typedef struct _ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION_V2 WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved; //Caller doesn't need to init this portion }ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION_V2; +typedef struct _EXTERNAL_ENCODER_CONTROL_PS_ALLOCATION +{ + DIG_ENCODER_CONTROL_PARAMETERS sDigEncoder; + WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved; +}EXTERNAL_ENCODER_CONTROL_PS_ALLOCATION; +/****************************************************************************/ +// Structures used by DVOEncoderControlTable +/****************************************************************************/ //ucTableFormatRevision=1,ucTableContentRevision=3 //ucDVOConfig: @@ -1062,15 +1318,6 @@ typedef struct _DVO_ENCODER_CONTROL_PARAMETERS_V3 // bit1=0: non-coherent mode // =1: coherent mode -#define LVDS_ENCODER_CONTROL_PARAMETERS_V3 LVDS_ENCODER_CONTROL_PARAMETERS_V2 -#define LVDS_ENCODER_CONTROL_PS_ALLOCATION_V3 LVDS_ENCODER_CONTROL_PARAMETERS_V3 - -#define TMDS1_ENCODER_CONTROL_PARAMETERS_V3 LVDS_ENCODER_CONTROL_PARAMETERS_V3 -#define TMDS1_ENCODER_CONTROL_PS_ALLOCATION_V3 TMDS1_ENCODER_CONTROL_PARAMETERS_V3 - -#define TMDS2_ENCODER_CONTROL_PARAMETERS_V3 LVDS_ENCODER_CONTROL_PARAMETERS_V3 -#define TMDS2_ENCODER_CONTROL_PS_ALLOCATION_V3 TMDS2_ENCODER_CONTROL_PARAMETERS_V3 - //========================================================================================== //Only change is here next time when changing encoder parameter definitions again! #define LVDS_ENCODER_CONTROL_PARAMETERS_LAST LVDS_ENCODER_CONTROL_PARAMETERS_V3 @@ -1114,20 +1361,23 @@ typedef struct _DVO_ENCODER_CONTROL_PARAMETERS_V3 #define PANEL_ENCODER_75FRC_E 0x00 #define PANEL_ENCODER_75FRC_F 0x80 -/**************************************************************************/ - +/****************************************************************************/ +// Structures used by SetVoltageTable +/****************************************************************************/ #define SET_VOLTAGE_TYPE_ASIC_VDDC 1 #define SET_VOLTAGE_TYPE_ASIC_MVDDC 2 #define SET_VOLTAGE_TYPE_ASIC_MVDDQ 3 #define SET_VOLTAGE_TYPE_ASIC_VDDCI 4 +#define SET_VOLTAGE_INIT_MODE 5 +#define SET_VOLTAGE_GET_MAX_VOLTAGE 6 //Gets the Max. voltage for the soldered Asic #define SET_ASIC_VOLTAGE_MODE_ALL_SOURCE 0x1 #define SET_ASIC_VOLTAGE_MODE_SOURCE_A 0x2 #define SET_ASIC_VOLTAGE_MODE_SOURCE_B 0x4 -#define SET_ASIC_VOLTAGE_MODE_SET_VOLTAGE 0x0 -#define SET_ASIC_VOLTAGE_MODE_GET_GPIOVAL 0x1 -#define SET_ASIC_VOLTAGE_MODE_GET_GPIOMASK 0x2 +#define SET_ASIC_VOLTAGE_MODE_SET_VOLTAGE 0x0 +#define SET_ASIC_VOLTAGE_MODE_GET_GPIOVAL 0x1 +#define SET_ASIC_VOLTAGE_MODE_GET_GPIOMASK 0x2 typedef struct _SET_VOLTAGE_PARAMETERS { @@ -1137,7 +1387,6 @@ typedef struct _SET_VOLTAGE_PARAMETERS UCHAR ucReserved; }SET_VOLTAGE_PARAMETERS; - typedef struct _SET_VOLTAGE_PARAMETERS_V2 { UCHAR ucVoltageType; // To tell which voltage to set up, VDDC/MVDDC/MVDDQ @@ -1145,13 +1394,23 @@ typedef struct _SET_VOLTAGE_PARAMETERS_V2 USHORT usVoltageLevel; // real voltage level }SET_VOLTAGE_PARAMETERS_V2; - typedef struct _SET_VOLTAGE_PS_ALLOCATION { SET_VOLTAGE_PARAMETERS sASICSetVoltage; WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved; }SET_VOLTAGE_PS_ALLOCATION; +/****************************************************************************/ +// Structures used by TVEncoderControlTable +/****************************************************************************/ +typedef struct _TV_ENCODER_CONTROL_PARAMETERS +{ + USHORT usPixelClock; // in 10KHz; for bios convenient + UCHAR ucTvStandard; // See definition "ATOM_TV_NTSC ..." + UCHAR ucAction; // 0: turn off encoder + // 1: setup and turn on encoder +}TV_ENCODER_CONTROL_PARAMETERS; + typedef struct _TV_ENCODER_CONTROL_PS_ALLOCATION { TV_ENCODER_CONTROL_PARAMETERS sTVEncoder; @@ -1165,6 +1424,9 @@ typedef struct _TV_ENCODER_CONTROL_PS_ALLOCATION #define USHORT void* #endif +/****************************************************************************/ +// Structure used in Data.mtb +/****************************************************************************/ typedef struct _ATOM_MASTER_LIST_OF_DATA_TABLES { USHORT UtilityPipeLine; // Offest for the utility to get parser info,Don't change this position! @@ -1207,14 +1469,15 @@ typedef struct _ATOM_MASTER_LIST_OF_DATA_TABLES #define USHORT UTEMP #endif - typedef struct _ATOM_MASTER_DATA_TABLE { ATOM_COMMON_TABLE_HEADER sHeader; ATOM_MASTER_LIST_OF_DATA_TABLES ListOfDataTables; }ATOM_MASTER_DATA_TABLE; - +/****************************************************************************/ +// Structure used in MultimediaCapabilityInfoTable +/****************************************************************************/ typedef struct _ATOM_MULTIMEDIA_CAPABILITY_INFO { ATOM_COMMON_TABLE_HEADER sHeader; @@ -1225,7 +1488,9 @@ typedef struct _ATOM_MULTIMEDIA_CAPABILITY_INFO UCHAR ucHostPortInfo; // Provides host port configuration information }ATOM_MULTIMEDIA_CAPABILITY_INFO; - +/****************************************************************************/ +// Structure used in MultimediaConfigInfoTable +/****************************************************************************/ typedef struct _ATOM_MULTIMEDIA_CONFIG_INFO { ATOM_COMMON_TABLE_HEADER sHeader; @@ -1244,7 +1509,9 @@ typedef struct _ATOM_MULTIMEDIA_CONFIG_INFO UCHAR ucVideoInput4Info;// Video Input 4 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6) }ATOM_MULTIMEDIA_CONFIG_INFO; -/****************************Firmware Info Table Definitions**********************/ +/****************************************************************************/ +// Structures used in FirmwareInfoTable +/****************************************************************************/ // usBIOSCapability Defintion: // Bit 0 = 0: Bios image is not Posted, =1:Bios image is Posted; @@ -1459,6 +1726,9 @@ typedef struct _ATOM_FIRMWARE_INFO_V1_4 #define ATOM_FIRMWARE_INFO_LAST ATOM_FIRMWARE_INFO_V1_4 +/****************************************************************************/ +// Structures used in IntegratedSystemInfoTable +/****************************************************************************/ #define IGP_CAP_FLAG_DYNAMIC_CLOCK_EN 0x2 #define IGP_CAP_FLAG_AC_CARD 0x4 #define IGP_CAP_FLAG_SDVO_CARD 0x8 @@ -1540,11 +1810,11 @@ typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V2 { ATOM_COMMON_TABLE_HEADER sHeader; ULONG ulBootUpEngineClock; //in 10kHz unit - ULONG ulReserved1[2]; //must be 0x0 for the reserved + ULONG ulReserved1[2]; //must be 0x0 for the reserved ULONG ulBootUpUMAClock; //in 10kHz unit ULONG ulBootUpSidePortClock; //in 10kHz unit ULONG ulMinSidePortClock; //in 10kHz unit - ULONG ulReserved2[6]; //must be 0x0 for the reserved + ULONG ulReserved2[6]; //must be 0x0 for the reserved ULONG ulSystemConfig; //see explanation below ULONG ulBootUpReqDisplayVector; ULONG ulOtherDisplayMisc; @@ -1567,7 +1837,13 @@ typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V2 USHORT usUMADataReturnTime; USHORT usLinkStatusZeroTime; USHORT usReserved; - ULONG ulReserved3[101]; //must be 0x0 + ULONG ulHighVoltageHTLinkFreq; // in 10Khz + ULONG ulLowVoltageHTLinkFreq; // in 10Khz + USHORT usMaxUpStreamHTLinkWidth; + USHORT usMaxDownStreamHTLinkWidth; + USHORT usMinUpStreamHTLinkWidth; + USHORT usMinDownStreamHTLinkWidth; + ULONG ulReserved3[97]; //must be 0x0 }ATOM_INTEGRATED_SYSTEM_INFO_V2; /* @@ -1576,8 +1852,20 @@ ulBootUpUMAClock: Boot-up UMA Clock in 10Khz; it must be 0x0 when UMA is no ulBootUpSidePortClock: Boot-up SidePort Clock in 10Khz; it must be 0x0 when SidePort Memory is not present,this could be equal to or less than maximum supported Sideport memory clock ulSystemConfig: -Bit[0]: =1 PowerExpress mode =0 Non-PowerExpress mode; -Bit[1]=1: system is running at overdrived engine clock =0:system is not running at overdrived engine clock +Bit[0]=1: PowerExpress mode =0 Non-PowerExpress mode; +Bit[1]=1: system boots up at AMD overdrived state or user customized mode. In this case, driver will just stick to this boot-up mode. No other PowerPlay state + =0: system boots up at driver control state. Power state depends on PowerPlay table. +Bit[2]=1: PWM method is used on NB voltage control. =0: GPIO method is used. +Bit[3]=1: Only one power state(Performance) will be supported. + =0: Multiple power states supported from PowerPlay table. +Bit[4]=1: CLMC is supported and enabled on current system. + =0: CLMC is not supported or enabled on current system. SBIOS need to support HT link/freq change through ATIF interface. +Bit[5]=1: Enable CDLW for all driver control power states. Max HT width is from SBIOS, while Min HT width is determined by display requirement. + =0: CDLW is disabled. If CLMC is enabled case, Min HT width will be set equal to Max HT width. If CLMC disabled case, Max HT width will be applied. +Bit[6]=1: High Voltage requested for all power states. In this case, voltage will be forced at 1.1v and powerplay table voltage drop/throttling request will be ignored. + =0: Voltage settings is determined by powerplay table. +Bit[7]=1: Enable CLMC as hybrid Mode. CDLD and CILR will be disabled in this case and we're using legacy C1E. This is workaround for CPU(Griffin) performance issue. + =0: Enable CLMC as regular mode, CDLD and CILR will be enabled. ulBootUpReqDisplayVector: This dword is a bit vector indicates what display devices are requested during boot-up. Refer to ATOM_DEVICE_xxx_SUPPORT for the bit vector definitions. @@ -1606,16 +1894,21 @@ ucDockingPinBit: which bit in this register to read the pin status; ucDockingPinPolarity:Polarity of the pin when docked; ulCPUCapInfo: [7:0]=1:Griffin;[7:0]=2:Greyhound;[7:0]=3:K8, other bits reserved for now and must be 0x0 - + usNumberOfCyclesInPeriod:Indicate how many cycles when PWM duty is 100%. -usMaxNBVoltage:Voltage regulator dependent PWM value.Set this one to 0xFF if VC without PWM. Set this to 0x0 if no VC at all. -usMinNBVoltage:Voltage regulator dependent PWM value.Set this one to 0x00 if VC without PWM or no VC at all. +usMaxNBVoltage:Max. voltage control value in either PWM or GPIO mode. +usMinNBVoltage:Min. voltage control value in either PWM or GPIO mode. + GPIO mode: both usMaxNBVoltage & usMinNBVoltage have a valid value ulSystemConfig.SYSTEM_CONFIG_USE_PWM_ON_VOLTAGE=0 + PWM mode: both usMaxNBVoltage & usMinNBVoltage have a valid value ulSystemConfig.SYSTEM_CONFIG_USE_PWM_ON_VOLTAGE=1 + GPU SW don't control mode: usMaxNBVoltage & usMinNBVoltage=0 and no care about ulSystemConfig.SYSTEM_CONFIG_USE_PWM_ON_VOLTAGE usBootUpNBVoltage:Boot-up voltage regulator dependent PWM value. +ulHTLinkFreq: Bootup HT link Frequency in 10Khz. +usMinHTLinkWidth: Bootup minimum HT link width. If CDLW disabled, this is equal to usMaxHTLinkWidth. + If CDLW enabled, both upstream and downstream width should be the same during bootup. +usMaxHTLinkWidth: Bootup maximum HT link width. If CDLW disabled, this is equal to usMinHTLinkWidth. + If CDLW enabled, both upstream and downstream width should be the same during bootup. -ulHTLinkFreq: Current HT link Frequency in 10Khz. -usMinHTLinkWidth: -usMaxHTLinkWidth: usUMASyncStartDelay: Memory access latency, required for watermark calculation usUMADataReturnTime: Memory access latency, required for watermark calculation usLinkStatusZeroTime:Memory access latency required for watermark calculation, set this to 0x0 for K8 CPU, set a proper value in 0.01 the unit of us @@ -1624,10 +1917,27 @@ for Griffin or Greyhound. SBIOS needs to convert to actual time by: if T0Ttime [5:4]=01b, then usLinkStatusZeroTime=T0Ttime [3:0]*0.5us (0.0 to 7.5us) if T0Ttime [5:4]=10b, then usLinkStatusZeroTime=T0Ttime [3:0]*2.0us (0.0 to 30us) if T0Ttime [5:4]=11b, and T0Ttime [3:0]=0x0 to 0xa, then usLinkStatusZeroTime=T0Ttime [3:0]*20us (0.0 to 200us) + +ulHighVoltageHTLinkFreq: HT link frequency for power state with low voltage. If boot up runs in HT1, this must be 0. + This must be less than or equal to ulHTLinkFreq(bootup frequency). +ulLowVoltageHTLinkFreq: HT link frequency for power state with low voltage or voltage scaling 1.0v~1.1v. If boot up runs in HT1, this must be 0. + This must be less than or equal to ulHighVoltageHTLinkFreq. + +usMaxUpStreamHTLinkWidth: Asymmetric link width support in the future, to replace usMaxHTLinkWidth. Not used for now. +usMaxDownStreamHTLinkWidth: same as above. +usMinUpStreamHTLinkWidth: Asymmetric link width support in the future, to replace usMinHTLinkWidth. Not used for now. +usMinDownStreamHTLinkWidth: same as above. */ + #define SYSTEM_CONFIG_POWEREXPRESS_ENABLE 0x00000001 #define SYSTEM_CONFIG_RUN_AT_OVERDRIVE_ENGINE 0x00000002 +#define SYSTEM_CONFIG_USE_PWM_ON_VOLTAGE 0x00000004 +#define SYSTEM_CONFIG_PERFORMANCE_POWERSTATE_ONLY 0x00000008 +#define SYSTEM_CONFIG_CLMC_ENABLED 0x00000010 +#define SYSTEM_CONFIG_CDLW_ENABLED 0x00000020 +#define SYSTEM_CONFIG_HIGH_VOLTAGE_REQUESTED 0x00000040 +#define SYSTEM_CONFIG_CLMC_HYBRID_MODE_ENABLED 0x00000080 #define IGP_DDI_SLOT_LANE_CONFIG_MASK 0x000000FF @@ -1683,14 +1993,16 @@ for Griffin or Greyhound. SBIOS needs to convert to actual time by: #define ATOM_DEVICE_DFP2_INDEX 0x00000007 #define ATOM_DEVICE_CV_INDEX 0x00000008 #define ATOM_DEVICE_DFP3_INDEX 0x00000009 -#define ATOM_DEVICE_RESERVEDA_INDEX 0x0000000A -#define ATOM_DEVICE_RESERVEDB_INDEX 0x0000000B +#define ATOM_DEVICE_DFP4_INDEX 0x0000000A +#define ATOM_DEVICE_DFP5_INDEX 0x0000000B #define ATOM_DEVICE_RESERVEDC_INDEX 0x0000000C #define ATOM_DEVICE_RESERVEDD_INDEX 0x0000000D #define ATOM_DEVICE_RESERVEDE_INDEX 0x0000000E #define ATOM_DEVICE_RESERVEDF_INDEX 0x0000000F -#define ATOM_MAX_SUPPORTED_DEVICE_INFO (ATOM_DEVICE_CV_INDEX+2) +#define ATOM_MAX_SUPPORTED_DEVICE_INFO (ATOM_DEVICE_DFP3_INDEX+1) #define ATOM_MAX_SUPPORTED_DEVICE_INFO_2 ATOM_MAX_SUPPORTED_DEVICE_INFO +#define ATOM_MAX_SUPPORTED_DEVICE_INFO_3 (ATOM_DEVICE_DFP5_INDEX + 1 ) + #define ATOM_MAX_SUPPORTED_DEVICE (ATOM_DEVICE_RESERVEDF_INDEX+1) #define ATOM_DEVICE_CRT1_SUPPORT (0x1L << ATOM_DEVICE_CRT1_INDEX ) @@ -1703,9 +2015,11 @@ for Griffin or Greyhound. SBIOS needs to convert to actual time by: #define ATOM_DEVICE_DFP2_SUPPORT (0x1L << ATOM_DEVICE_DFP2_INDEX) #define ATOM_DEVICE_CV_SUPPORT (0x1L << ATOM_DEVICE_CV_INDEX ) #define ATOM_DEVICE_DFP3_SUPPORT (0x1L << ATOM_DEVICE_DFP3_INDEX ) +#define ATOM_DEVICE_DFP4_SUPPORT (0x1L << ATOM_DEVICE_DFP4_INDEX ) +#define ATOM_DEVICE_DFP5_SUPPORT (0x1L << ATOM_DEVICE_DFP5_INDEX ) #define ATOM_DEVICE_CRT_SUPPORT ATOM_DEVICE_CRT1_SUPPORT | ATOM_DEVICE_CRT2_SUPPORT -#define ATOM_DEVICE_DFP_SUPPORT ATOM_DEVICE_DFP1_SUPPORT | ATOM_DEVICE_DFP2_SUPPORT | ATOM_DEVICE_DFP3_SUPPORT +#define ATOM_DEVICE_DFP_SUPPORT ATOM_DEVICE_DFP1_SUPPORT | ATOM_DEVICE_DFP2_SUPPORT | ATOM_DEVICE_DFP3_SUPPORT | ATOM_DEVICE_DFP4_SUPPORT | ATOM_DEVICE_DFP5_SUPPORT #define ATOM_DEVICE_TV_SUPPORT ATOM_DEVICE_TV1_SUPPORT | ATOM_DEVICE_TV2_SUPPORT #define ATOM_DEVICE_LCD_SUPPORT ATOM_DEVICE_LCD1_SUPPORT | ATOM_DEVICE_LCD2_SUPPORT @@ -1776,7 +2090,6 @@ for Griffin or Greyhound. SBIOS needs to convert to actual time by: // = 3-7 Reserved for future I2C engines // [3-0] - I2C_LINE_MUX = A Mux number when it's HW assisted I2C or GPIO ID when it's SW I2C - typedef struct _ATOM_I2C_ID_CONFIG { #if ATOM_BIG_ENDIAN @@ -1797,6 +2110,9 @@ typedef union _ATOM_I2C_ID_CONFIG_ACCESS }ATOM_I2C_ID_CONFIG_ACCESS; +/****************************************************************************/ +// Structure used in GPIO_I2C_InfoTable +/****************************************************************************/ typedef struct _ATOM_GPIO_I2C_ASSIGMENT { USHORT usClkMaskRegisterIndex; @@ -1826,6 +2142,9 @@ typedef struct _ATOM_GPIO_I2C_INFO ATOM_GPIO_I2C_ASSIGMENT asGPIO_Info[ATOM_MAX_SUPPORTED_DEVICE]; }ATOM_GPIO_I2C_INFO; +/****************************************************************************/ +// Common Structure used in other structures +/****************************************************************************/ #ifndef _H2INC @@ -1908,7 +2227,9 @@ typedef union _ATOM_MODE_MISC_INFO_ACCESS // VESA_HSYNC_WIDTH = VESA_HSYNC_TIME = EDID_HSPW // VESA_BORDER = EDID_BORDER - +/****************************************************************************/ +// Structure used in SetCRTC_UsingDTDTimingTable +/****************************************************************************/ typedef struct _SET_CRTC_USING_DTD_TIMING_PARAMETERS { USHORT usH_Size; @@ -1926,6 +2247,9 @@ typedef struct _SET_CRTC_USING_DTD_TIMING_PARAMETERS UCHAR ucPadding[3]; }SET_CRTC_USING_DTD_TIMING_PARAMETERS; +/****************************************************************************/ +// Structure used in SetCRTC_TimingTable +/****************************************************************************/ typedef struct _SET_CRTC_TIMING_PARAMETERS { USHORT usH_Total; // horizontal total @@ -1946,7 +2270,11 @@ typedef struct _SET_CRTC_TIMING_PARAMETERS }SET_CRTC_TIMING_PARAMETERS; #define SET_CRTC_TIMING_PARAMETERS_PS_ALLOCATION SET_CRTC_TIMING_PARAMETERS - +/****************************************************************************/ +// Structure used in StandardVESA_TimingTable +// AnalogTV_InfoTable +// ComponentVideoInfoTable +/****************************************************************************/ typedef struct _ATOM_MODE_TIMING { USHORT usCRTC_H_Total; @@ -1968,7 +2296,6 @@ typedef struct _ATOM_MODE_TIMING UCHAR ucRefreshRate; }ATOM_MODE_TIMING; - typedef struct _ATOM_DTD_FORMAT { USHORT usPixClk; @@ -1989,12 +2316,19 @@ typedef struct _ATOM_DTD_FORMAT UCHAR ucRefreshRate; }ATOM_DTD_FORMAT; +/****************************************************************************/ +// Structure used in LVDS_InfoTable +// * Need a document to describe this table +/****************************************************************************/ #define SUPPORTED_LCD_REFRESHRATE_30Hz 0x0004 #define SUPPORTED_LCD_REFRESHRATE_40Hz 0x0008 #define SUPPORTED_LCD_REFRESHRATE_50Hz 0x0010 #define SUPPORTED_LCD_REFRESHRATE_60Hz 0x0020 -/****************************LVDS Info Table Definitions **********************/ +//Once DAL sees this CAP is set, it will read EDID from LCD on its own instead of using sLCDTiming in ATOM_LVDS_INFO_V12. +//Other entries in ATOM_LVDS_INFO_V12 are still valid/useful to DAL +#define LCDPANEL_CAP_READ_EDID 0x1 + //ucTableFormatRevision=1 //ucTableContentRevision=1 typedef struct _ATOM_LVDS_INFO @@ -2123,9 +2457,9 @@ typedef struct _ATOM_SPREAD_SPECTRUM_INFO ATOM_SPREAD_SPECTRUM_ASSIGNMENT asSS_Info[ATOM_MAX_SS_ENTRY]; }ATOM_SPREAD_SPECTRUM_INFO; - - - +/****************************************************************************/ +// Structure used in AnalogTV_InfoTable (Top level) +/****************************************************************************/ //ucTVBootUpDefaultStd definiton: //ATOM_TV_NTSC 1 @@ -2137,7 +2471,6 @@ typedef struct _ATOM_SPREAD_SPECTRUM_INFO //ATOM_TV_PAL60 7 //ATOM_TV_SECAM 8 - //ucTVSuppportedStd definition: #define NTSC_SUPPORT 0x1 #define NTSCJ_SUPPORT 0x2 @@ -2227,7 +2560,15 @@ typedef struct _ATOM_ANALOG_TV_INFO #define ATOM_DFP3_DTD_MODE_TBL_ADDR (ATOM_DFP3_EDID_ADDR + ATOM_EDID_RAW_DATASIZE) #define ATOM_DFP3_STD_MODE_TBL_ADDR (ATOM_DFP3_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE) -#define ATOM_DP_TRAINING_TBL_ADDR (ATOM_DFP3_STD_MODE_TBL_ADDR+ATOM_STD_MODE_SUPPORT_TBL_SIZE) +#define ATOM_DFP4_EDID_ADDR (ATOM_DFP3_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE) +#define ATOM_DFP4_DTD_MODE_TBL_ADDR (ATOM_DFP4_EDID_ADDR + ATOM_EDID_RAW_DATASIZE) +#define ATOM_DFP4_STD_MODE_TBL_ADDR (ATOM_DFP4_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE) + +#define ATOM_DFP5_EDID_ADDR (ATOM_DFP4_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE) +#define ATOM_DFP5_DTD_MODE_TBL_ADDR (ATOM_DFP5_EDID_ADDR + ATOM_EDID_RAW_DATASIZE) +#define ATOM_DFP5_STD_MODE_TBL_ADDR (ATOM_DFP5_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE) + +#define ATOM_DP_TRAINING_TBL_ADDR (ATOM_DFP5_STD_MODE_TBL_ADDR+ATOM_STD_MODE_SUPPORT_TBL_SIZE) #define ATOM_STACK_STORAGE_START (ATOM_DP_TRAINING_TBL_ADDR+256) #define ATOM_STACK_STORAGE_END ATOM_STACK_STORAGE_START+512 @@ -2240,6 +2581,15 @@ typedef struct _ATOM_ANALOG_TV_INFO #define ATOM_VRAM_BLOCK_NEEDS_NO_RESERVATION 0x1 #define ATOM_VRAM_BLOCK_NEEDS_RESERVATION 0x0 +/***********************************************************************************/ +// Structure used in VRAM_UsageByFirmwareTable +// Note1: This table is filled by SetBiosReservationStartInFB in CoreCommSubs.asm +// at running time. +// note2: From RV770, the memory is more than 32bit addressable, so we will change +// ucTableFormatRevision=1,ucTableContentRevision=4, the strcuture remains +// exactly same as 1.1 and 1.2 (1.3 is never in use), but ulStartAddrUsedByFirmware +// (in offset to start of memory address) is KB aligned instead of byte aligend. +/***********************************************************************************/ #define ATOM_MAX_FIRMWARE_VRAM_USAGE_INFO 1 typedef struct _ATOM_FIRMWARE_VRAM_RESERVE_INFO @@ -2255,8 +2605,9 @@ typedef struct _ATOM_VRAM_USAGE_BY_FIRMWARE ATOM_FIRMWARE_VRAM_RESERVE_INFO asFirmwareVramReserveInfo[ATOM_MAX_FIRMWARE_VRAM_USAGE_INFO]; }ATOM_VRAM_USAGE_BY_FIRMWARE; -/**************************************************************************/ -//GPIO Pin lut table definition +/****************************************************************************/ +// Structure used in GPIO_Pin_LUTTable +/****************************************************************************/ typedef struct _ATOM_GPIO_PIN_ASSIGNMENT { USHORT usGpioPin_AIndex; @@ -2270,9 +2621,9 @@ typedef struct _ATOM_GPIO_PIN_LUT ATOM_GPIO_PIN_ASSIGNMENT asGPIO_Pin[1]; }ATOM_GPIO_PIN_LUT; -/**************************************************************************/ - - +/****************************************************************************/ +// Structure used in ComponentVideoInfoTable +/****************************************************************************/ #define GPIO_PIN_ACTIVE_HIGH 0x1 #define MAX_SUPPORTED_CV_STANDARDS 5 @@ -2362,8 +2713,9 @@ typedef struct _ATOM_COMPONENT_VIDEO_INFO_V21 #define ATOM_COMPONENT_VIDEO_INFO_LAST ATOM_COMPONENT_VIDEO_INFO_V21 -/**************************************************************************/ -//Object table starts here +/****************************************************************************/ +// Structure used in object_InfoTable +/****************************************************************************/ typedef struct _ATOM_OBJECT_HEADER { ATOM_COMMON_TABLE_HEADER sHeader; @@ -2608,9 +2960,9 @@ typedef struct _ATOM_ROUTER_DATA_CLOCK_PATH_SELECT_RECORD #define ATOM_ROUTER_MUX_PIN_STATE_MASK 0x0f #define ATOM_ROUTER_MUX_PIN_SINGLE_STATE_COMPLEMENT 0x01 -/**************************************************************************/ -//ASIC voltage data table starts here - +/****************************************************************************/ +// ASIC voltage data table +/****************************************************************************/ typedef struct _ATOM_VOLTAGE_INFO_HEADER { USHORT usVDDCBaseLevel; //In number of 50mv unit @@ -2836,13 +3188,16 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO{ #define ATOM_S0_CV_DIN 0x00002000L #define ATOM_S0_CV_MASK (ATOM_S0_CV+ATOM_S0_CV_DIN) - #define ATOM_S0_DFP1 0x00010000L #define ATOM_S0_DFP2 0x00020000L #define ATOM_S0_LCD1 0x00040000L #define ATOM_S0_LCD2 0x00080000L #define ATOM_S0_TV2 0x00100000L #define ATOM_S0_DFP3 0x00200000L +#define ATOM_S0_DFP4 0x00400000L +#define ATOM_S0_DFP5 0x00800000L + +#define ATOM_S0_DFP_MASK ATOM_S0_DFP1 | ATOM_S0_DFP2 | ATOM_S0_DFP3 | ATOM_S0_DFP4 | ATOM_S0_DFP5 #define ATOM_S0_FAD_REGISTER_BUG 0x02000000L // If set, indicates we are running a PCIE asic with // the FAD/HDP reg access bug. Bit is read by DAL @@ -2900,7 +3255,6 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO{ #define ATOM_S1_ROM_LOCATION_MASK 0x0000FFFFL #define ATOM_S1_PCI_BUS_DEV_MASK 0xFFFF0000L - // BIOS_2_SCRATCH Definition #define ATOM_S2_TV1_STANDARD_MASK 0x0000000FL #define ATOM_S2_CURRENT_BL_LEVEL_MASK 0x0000FF00L @@ -2916,12 +3270,14 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO{ #define ATOM_S2_DFP2_DPMS_STATE 0x00800000L #define ATOM_S2_CV_DPMS_STATE 0x01000000L #define ATOM_S2_DFP3_DPMS_STATE 0x02000000L +#define ATOM_S2_DFP4_DPMS_STATE 0x04000000L +#define ATOM_S2_DFP5_DPMS_STATE 0x08000000L -#define ATOM_S2_DEVICE_DPMS_STATE (ATOM_S2_CRT1_DPMS_STATE+ATOM_S2_LCD1_DPMS_STATE+ATOM_S2_TV1_DPMS_STATE+\ - ATOM_S2_DFP1I_DPMS_STATE+ATOM_S2_CRT2_DPMS_STATE+ATOM_S2_LCD2_DPMS_STATE+\ - ATOM_S2_TV2_DPMS_STATE+ATOM_S2_DFP1X_DPMS_STATE+ATOM_S2_CV_DPMS_STATE+\ - ATOM_S2_DFP3_DPMS_STATE) +#define ATOM_S2_DFP_DPM_STATE ATOM_S2_DFP1_DPMS_STATE | ATOM_S2_DFP2_DPMS_STATE | ATOM_S2_DFP3_DPMS_STATE | ATOM_S2_DFP4_DPMS_STATE | ATOM_S2_DFP5_DPMS_STATE +#define ATOM_S2_DEVICE_DPMS_STATE (ATOM_S2_CRT1_DPMS_STATE+ATOM_S2_LCD1_DPMS_STATE+ATOM_S2_TV1_DPMS_STATE+\ + ATOM_S2_DFP_DPMS_STATE+ATOM_S2_CRT2_DPMS_STATE+ATOM_S2_LCD2_DPMS_STATE+\ + ATOM_S2_TV2_DPMS_STATE+ATOM_S2_CV_DPMS_STATE #define ATOM_S2_FORCEDLOWPWRMODE_STATE_MASK 0x0C000000L #define ATOM_S2_FORCEDLOWPWRMODE_STATE_MASK_SHIFT 26 @@ -2950,6 +3306,8 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO{ #define ATOM_S2_DFP2_DPMS_STATEb2 0x80 #define ATOM_S2_CV_DPMS_STATEb3 0x01 #define ATOM_S2_DFP3_DPMS_STATEb3 0x02 +#define ATOM_S2_DFP4_DPMS_STATEb3 0x04 +#define ATOM_S2_DFP5_DPMS_STATEb3 0x08 #define ATOM_S2_DEVICE_DPMS_MASKw1 0x3FF #define ATOM_S2_FORCEDLOWPWRMODE_STATE_MASKb3 0x0C @@ -2969,6 +3327,8 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO{ #define ATOM_S3_DFP2_ACTIVE 0x00000080L #define ATOM_S3_CV_ACTIVE 0x00000100L #define ATOM_S3_DFP3_ACTIVE 0x00000200L +#define ATOM_S3_DFP4_ACTIVE 0x00000400L +#define ATOM_S3_DFP5_ACTIVE 0x00000800L #define ATOM_S3_DEVICE_ACTIVE_MASK 0x000003FFL @@ -2985,8 +3345,10 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO{ #define ATOM_S3_DFP2_CRTC_ACTIVE 0x00800000L #define ATOM_S3_CV_CRTC_ACTIVE 0x01000000L #define ATOM_S3_DFP3_CRTC_ACTIVE 0x02000000L +#define ATOM_S3_DFP4_CRTC_ACTIVE 0x04000000L +#define ATOM_S3_DFP5_CRTC_ACTIVE 0x08000000L -#define ATOM_S3_DEVICE_CRTC_ACTIVE_MASK 0x03FF0000L +#define ATOM_S3_DEVICE_CRTC_ACTIVE_MASK 0x0FFF0000L #define ATOM_S3_ASIC_GUI_ENGINE_HUNG 0x20000000L #define ATOM_S3_ALLOW_FAST_PWR_SWITCH 0x40000000L #define ATOM_S3_RQST_GPU_USE_MIN_PWR 0x80000000L @@ -3002,8 +3364,10 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO{ #define ATOM_S3_DFP2_ACTIVEb0 0x80 #define ATOM_S3_CV_ACTIVEb1 0x01 #define ATOM_S3_DFP3_ACTIVEb1 0x02 +#define ATOM_S3_DFP4_ACTIVEb1 0x04 +#define ATOM_S3_DFP5_ACTIVEb1 0x08 -#define ATOM_S3_ACTIVE_CRTC1w0 0x3FF +#define ATOM_S3_ACTIVE_CRTC1w0 0xFFF #define ATOM_S3_CRT1_CRTC_ACTIVEb2 0x01 #define ATOM_S3_LCD1_CRTC_ACTIVEb2 0x02 @@ -3015,8 +3379,10 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO{ #define ATOM_S3_DFP2_CRTC_ACTIVEb2 0x80 #define ATOM_S3_CV_CRTC_ACTIVEb3 0x01 #define ATOM_S3_DFP3_CRTC_ACTIVEb3 0x02 +#define ATOM_S3_DFP4_CRTC_ACTIVEb3 0x04 +#define ATOM_S3_DFP5_CRTC_ACTIVEb3 0x08 -#define ATOM_S3_ACTIVE_CRTC2w1 0x3FF +#define ATOM_S3_ACTIVE_CRTC2w1 0xFFF #define ATOM_S3_ASIC_GUI_ENGINE_HUNGb3 0x20 #define ATOM_S3_ALLOW_FAST_PWR_SWITCHb3 0x40 @@ -3027,13 +3393,11 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO{ #define ATOM_S4_LCD1_REFRESH_MASK 0x0000FF00L #define ATOM_S4_LCD1_REFRESH_SHIFT 8 - //Byte aligned defintion for BIOS usage #define ATOM_S4_LCD1_PANEL_ID_MASKb0 0x0FF #define ATOM_S4_LCD1_REFRESH_MASKb1 ATOM_S4_LCD1_PANEL_ID_MASKb0 #define ATOM_S4_VRAM_INFO_MASKb2 ATOM_S4_LCD1_PANEL_ID_MASKb0 - // BIOS_5_SCRATCH Definition, BIOS_5_SCRATCH is used by Firmware only !!!! #define ATOM_S5_DOS_REQ_CRT1b0 0x01 #define ATOM_S5_DOS_REQ_LCD1b0 0x02 @@ -3045,6 +3409,8 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO{ #define ATOM_S5_DOS_REQ_DFP2b0 0x80 #define ATOM_S5_DOS_REQ_CVb1 0x01 #define ATOM_S5_DOS_REQ_DFP3b1 0x02 +#define ATOM_S5_DOS_REQ_DFP4b1 0x04 +#define ATOM_S5_DOS_REQ_DFP5b1 0x08 #define ATOM_S5_DOS_REQ_DEVICEw0 0x03FF @@ -3058,6 +3424,8 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO{ #define ATOM_S5_DOS_REQ_DFP2 0x0080 #define ATOM_S5_DOS_REQ_CV 0x0100 #define ATOM_S5_DOS_REQ_DFP3 0x0200 +#define ATOM_S5_DOS_REQ_DFP4 0x0400 +#define ATOM_S5_DOS_REQ_DFP5 0x0800 #define ATOM_S5_DOS_FORCE_CRT1b2 ATOM_S5_DOS_REQ_CRT1b0 #define ATOM_S5_DOS_FORCE_TV1b2 ATOM_S5_DOS_REQ_TV1b0 @@ -3085,7 +3453,6 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO{ #define ATOM_S6_DISPLAY_STATE_CHANGE 0x00004000L //This bit is recycled when ATOM_BIOS_INFO_BIOS_SCRATCH6_SCL2_REDEFINE is set,previously it's SCL2_H_expansion #define ATOM_S6_I2C_STATE_CHANGE 0x00008000L //This bit is recycled,when ATOM_BIOS_INFO_BIOS_SCRATCH6_SCL2_REDEFINE is set,previously it's SCL2_V_expansion - #define ATOM_S6_ACC_REQ_CRT1 0x00010000L #define ATOM_S6_ACC_REQ_LCD1 0x00020000L #define ATOM_S6_ACC_REQ_TV1 0x00040000L @@ -3096,8 +3463,10 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO{ #define ATOM_S6_ACC_REQ_DFP2 0x00800000L #define ATOM_S6_ACC_REQ_CV 0x01000000L #define ATOM_S6_ACC_REQ_DFP3 0x02000000L +#define ATOM_S6_ACC_REQ_DFP4 0x04000000L +#define ATOM_S6_ACC_REQ_DFP5 0x08000000L -#define ATOM_S6_ACC_REQ_MASK 0x03FF0000L +#define ATOM_S6_ACC_REQ_MASK 0x0FFF0000L #define ATOM_S6_SYSTEM_POWER_MODE_CHANGE 0x10000000L #define ATOM_S6_ACC_BLOCK_DISPLAY_SWITCH 0x20000000L #define ATOM_S6_VRI_BRIGHTNESS_CHANGE 0x40000000L @@ -3129,6 +3498,8 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO{ #define ATOM_S6_ACC_REQ_DFP2b2 0x80 #define ATOM_S6_ACC_REQ_CVb3 0x01 #define ATOM_S6_ACC_REQ_DFP3b3 0x02 +#define ATOM_S6_ACC_REQ_DFP4b3 0x04 +#define ATOM_S6_ACC_REQ_DFP5b3 0x08 #define ATOM_S6_ACC_REQ_DEVICEw1 ATOM_S5_DOS_REQ_DEVICEw0 #define ATOM_S6_SYSTEM_POWER_MODE_CHANGEb3 0x10 @@ -3403,7 +3774,7 @@ typedef struct _ATOM_TV_MODE_SCALER_PTR typedef struct _ATOM_STANDARD_VESA_TIMING { ATOM_COMMON_TABLE_HEADER sHeader; - ATOM_MODE_TIMING aModeTimings[16]; // 16 is not the real array number, just for initial allocation + ATOM_DTD_FORMAT aModeTimings[16]; // 16 is not the real array number, just for initial allocation }ATOM_STANDARD_VESA_TIMING; @@ -3482,6 +3853,11 @@ typedef struct _ATOM_INIT_REG_BLOCK{ #define VALUE_SAME_AS_ABOVE 0 #define VALUE_MASK_DWORD 0x84 +#define INDEX_ACCESS_RANGE_BEGIN (VALUE_DWORD + 1) +#define INDEX_ACCESS_RANGE_END (INDEX_ACCESS_RANGE_BEGIN + 1) +#define VALUE_INDEX_ACCESS_SINGLE (INDEX_ACCESS_RANGE_END + 1) + + typedef struct _ATOM_MC_INIT_PARAM_TABLE { ATOM_COMMON_TABLE_HEADER sHeader; @@ -3520,6 +3896,28 @@ typedef struct _ATOM_MC_INIT_PARAM_TABLE #define QIMONDA INFINEON #define PROMOS MOSEL +/////////////Support for GDDR5 MC uCode to reside in upper 64K of ROM///////////// + +#define UCODE_ROM_START_ADDRESS 0x1c000 +#define UCODE_SIGNATURE 0x4375434d // 'MCuC' - MC uCode + +//uCode block header for reference + +typedef struct _MCuCodeHeader +{ + ULONG ulSignature; + UCHAR ucRevision; + UCHAR ucChecksum; + UCHAR ucReserved1; + UCHAR ucReserved2; + USHORT usParametersLength; + USHORT usUCodeLength; + USHORT usReserved1; + USHORT usReserved2; +} MCuCodeHeader; + +////////////////////////////////////////////////////////////////////////////////// + #define ATOM_MAX_NUMBER_OF_VRAM_MODULE 16 #define ATOM_VRAM_MODULE_MEMORY_VENDOR_ID_MASK 0xF @@ -3576,6 +3974,42 @@ typedef struct _ATOM_VRAM_MODULE_V2 typedef struct _ATOM_MEMORY_TIMING_FORMAT { ULONG ulClkRange; // memory clock in 10kHz unit, when target memory clock is below this clock, use this memory timing + union{ + USHORT usMRS; // mode register + USHORT usDDR3_MR0; + }; + union{ + USHORT usEMRS; // extended mode register + USHORT usDDR3_MR1; + }; + UCHAR ucCL; // CAS latency + UCHAR ucWL; // WRITE Latency + UCHAR uctRAS; // tRAS + UCHAR uctRC; // tRC + UCHAR uctRFC; // tRFC + UCHAR uctRCDR; // tRCDR + UCHAR uctRCDW; // tRCDW + UCHAR uctRP; // tRP + UCHAR uctRRD; // tRRD + UCHAR uctWR; // tWR + UCHAR uctWTR; // tWTR + UCHAR uctPDIX; // tPDIX + UCHAR uctFAW; // tFAW + UCHAR uctAOND; // tAOND + union + { + struct { + UCHAR ucflag; // flag to control memory timing calculation. bit0= control EMRS2 Infineon + UCHAR ucReserved; + }; + USHORT usDDR3_MR2; + }; +}ATOM_MEMORY_TIMING_FORMAT; + + +typedef struct _ATOM_MEMORY_TIMING_FORMAT_V1 +{ + ULONG ulClkRange; // memory clock in 10kHz unit, when target memory clock is below this clock, use this memory timing USHORT usMRS; // mode register USHORT usEMRS; // extended mode register UCHAR ucCL; // CAS latency @@ -3593,16 +4027,31 @@ typedef struct _ATOM_MEMORY_TIMING_FORMAT UCHAR uctFAW; // tFAW UCHAR uctAOND; // tAOND UCHAR ucflag; // flag to control memory timing calculation. bit0= control EMRS2 Infineon - UCHAR ucReserved; // -}ATOM_MEMORY_TIMING_FORMAT; +////////////////////////////////////GDDR parameters/////////////////////////////////// + UCHAR uctCCDL; // + UCHAR uctCRCRL; // + UCHAR uctCRCWL; // + UCHAR uctCKE; // + UCHAR uctCKRSE; // + UCHAR uctCKRSX; // + UCHAR uctFAW32; // + UCHAR ucReserved1; // + UCHAR ucReserved2; // + UCHAR ucTerminator; +}ATOM_MEMORY_TIMING_FORMAT_V1; -#define MEM_TIMING_FLAG_APP_MODE 0x01 // =0 mid clock range =1 high clock range typedef struct _ATOM_MEMORY_FORMAT { ULONG ulDllDisClock; // memory DLL will be disable when target memory clock is below this clock - USHORT usEMRS2Value; // EMRS2 Value is used for GDDR2 and GDDR4 memory type - USHORT usEMRS3Value; // EMRS3 Value is used for GDDR2 and GDDR4 memory type + union{ + USHORT usEMRS2Value; // EMRS2 Value is used for GDDR2 and GDDR4 memory type + USHORT usDDR3_Reserved; // Not used for DDR3 memory + }; + union{ + USHORT usEMRS3Value; // EMRS3 Value is used for GDDR2 and GDDR4 memory type + USHORT usDDR3_MR3; // Used for DDR3 memory + }; UCHAR ucMemoryType; // [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4;[3:0] - must not be used for now; UCHAR ucMemoryVenderID; // Predefined,never change across designs or memory type/vender. If not predefined, vendor detection table gets executed UCHAR ucRow; // Number of Row,in power of 2; @@ -3641,6 +4090,79 @@ typedef struct _ATOM_VRAM_MODULE_V3 #define ATOM_VRAM_MODULE ATOM_VRAM_MODULE_V3 +typedef struct _ATOM_VRAM_MODULE_V4 +{ + ULONG ulChannelMapCfg; // board dependent parameter: Channel combination + USHORT usModuleSize; // size of ATOM_VRAM_MODULE_V4, make it easy for VBIOS to look for next entry of VRAM_MODULE + USHORT usPrivateReserved; // BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!! + // MC_ARB_RAMCFG (includes NOOFBANK,NOOFRANKS,NOOFROWS,NOOFCOLS) + USHORT usReserved; + UCHAR ucExtMemoryID; // An external indicator (by hardcode, callback or pin) to tell what is the current memory module + UCHAR ucMemoryType; // [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4; 0x5:DDR5 [3:0] - Must be 0x0 for now; + UCHAR ucChannelNum; // Number of channels present in this module config + UCHAR ucChannelWidth; // 0 - 32 bits; 1 - 64 bits + UCHAR ucDensity; // _8Mx32, _16Mx32, _16Mx16, _32Mx16 + UCHAR ucFlag; // To enable/disable functionalities based on memory type + UCHAR ucMisc; // bit0: 0 - single rank; 1 - dual rank; bit2: 0 - burstlength 4, 1 - burstlength 8 + UCHAR ucVREFI; // board dependent parameter + UCHAR ucNPL_RT; // board dependent parameter:NPL round trip delay, used for calculate memory timing parameters + UCHAR ucPreamble; // [7:4] Write Preamble, [3:0] Read Preamble + UCHAR ucMemorySize; // BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!! + // Total memory size in unit of 16MB for CONFIG_MEMSIZE - bit[23:0] zeros + UCHAR ucReserved[3]; + +//compare with V3, we flat the struct by merging ATOM_MEMORY_FORMAT (as is) into V4 as the same level + union{ + USHORT usEMRS2Value; // EMRS2 Value is used for GDDR2 and GDDR4 memory type + USHORT usDDR3_Reserved; + }; + union{ + USHORT usEMRS3Value; // EMRS3 Value is used for GDDR2 and GDDR4 memory type + USHORT usDDR3_MR3; // Used for DDR3 memory + }; + UCHAR ucMemoryVenderID; // Predefined, If not predefined, vendor detection table gets executed + UCHAR ucRefreshRateFactor; // [1:0]=RefreshFactor (00=8ms, 01=16ms, 10=32ms,11=64ms) + UCHAR ucReserved2[2]; + ATOM_MEMORY_TIMING_FORMAT asMemTiming[5];//Memory Timing block sort from lower clock to higher clock +}ATOM_VRAM_MODULE_V4; + +#define VRAM_MODULE_V4_MISC_RANK_MASK 0x3 +#define VRAM_MODULE_V4_MISC_DUAL_RANK 0x1 +#define VRAM_MODULE_V4_MISC_BL_MASK 0x4 +#define VRAM_MODULE_V4_MISC_BL8 0x4 +#define VRAM_MODULE_V4_MISC_DUAL_CS 0x10 + +typedef struct _ATOM_VRAM_MODULE_V5 +{ + ULONG ulChannelMapCfg; // board dependent parameter: Channel combination + USHORT usModuleSize; // size of ATOM_VRAM_MODULE_V4, make it easy for VBIOS to look for next entry of VRAM_MODULE + USHORT usPrivateReserved; // BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!! + // MC_ARB_RAMCFG (includes NOOFBANK,NOOFRANKS,NOOFROWS,NOOFCOLS) + USHORT usReserved; + UCHAR ucExtMemoryID; // An external indicator (by hardcode, callback or pin) to tell what is the current memory module + UCHAR ucMemoryType; // [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4; 0x5:DDR5 [3:0] - Must be 0x0 for now; + UCHAR ucChannelNum; // Number of channels present in this module config + UCHAR ucChannelWidth; // 0 - 32 bits; 1 - 64 bits + UCHAR ucDensity; // _8Mx32, _16Mx32, _16Mx16, _32Mx16 + UCHAR ucFlag; // To enable/disable functionalities based on memory type + UCHAR ucMisc; // bit0: 0 - single rank; 1 - dual rank; bit2: 0 - burstlength 4, 1 - burstlength 8 + UCHAR ucVREFI; // board dependent parameter + UCHAR ucNPL_RT; // board dependent parameter:NPL round trip delay, used for calculate memory timing parameters + UCHAR ucPreamble; // [7:4] Write Preamble, [3:0] Read Preamble + UCHAR ucMemorySize; // BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!! + // Total memory size in unit of 16MB for CONFIG_MEMSIZE - bit[23:0] zeros + UCHAR ucReserved[3]; + +//compare with V3, we flat the struct by merging ATOM_MEMORY_FORMAT (as is) into V4 as the same level + USHORT usEMRS2Value; // EMRS2 Value is used for GDDR2 and GDDR4 memory type + USHORT usEMRS3Value; // EMRS3 Value is used for GDDR2 and GDDR4 memory type + UCHAR ucMemoryVenderID; // Predefined, If not predefined, vendor detection table gets executed + UCHAR ucRefreshRateFactor; // [1:0]=RefreshFactor (00=8ms, 01=16ms, 10=32ms,11=64ms) + UCHAR ucFIFODepth; // FIFO depth supposes to be detected during vendor detection, but if we dont do vendor detection we have to hardcode FIFO Depth + UCHAR ucCDR_Bandwidth; // [0:3]=Read CDR bandwidth, [4:7] - Write CDR Bandwidth + ATOM_MEMORY_TIMING_FORMAT_V1 asMemTiming[5];//Memory Timing block sort from lower clock to higher clock +}ATOM_VRAM_MODULE_V5; + typedef struct _ATOM_VRAM_INFO_V2 { ATOM_COMMON_TABLE_HEADER sHeader; @@ -3663,6 +4185,21 @@ typedef struct _ATOM_VRAM_INFO_V3 #define ATOM_VRAM_INFO_LAST ATOM_VRAM_INFO_V3 +typedef struct _ATOM_VRAM_INFO_V4 +{ + ATOM_COMMON_TABLE_HEADER sHeader; + USHORT usMemAdjustTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory vendor specific MC adjust setting + USHORT usMemClkPatchTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory clock specific MC setting + USHORT usRerseved; + UCHAR ucMemDQ7_0ByteRemap; // DQ line byte remap, =0: Memory Data line BYTE0, =1: BYTE1, =2: BYTE2, =3: BYTE3 + ULONG ulMemDQ7_0BitRemap; // each DQ line ( 7~0) use 3bits, like: DQ0=Bit[2:0], DQ1:[5:3], ... DQ7:[23:21] + UCHAR ucReservde[4]; + UCHAR ucNumOfVRAMModule; + ATOM_VRAM_MODULE_V4 aVramInfo[ATOM_MAX_NUMBER_OF_VRAM_MODULE]; // just for allocation, real number of blocks is in ucNumOfVRAMModule; + ATOM_INIT_REG_BLOCK asMemPatch; // for allocation + // ATOM_INIT_REG_BLOCK aMemAdjust; +}ATOM_VRAM_INFO_V4; + typedef struct _ATOM_VRAM_GPIO_DETECTION_INFO { ATOM_COMMON_TABLE_HEADER sHeader; @@ -3966,6 +4503,7 @@ typedef struct _DP_ENCODER_SERVICE_PARAMETERS #define ATOM_DP_ACTION_TRAINING_PATTERN_SEL 0x04 #define ATOM_DP_ACTION_SET_VSWING_PREEMP 0x05 #define ATOM_DP_ACTION_GET_VSWING_PREEMP 0x06 +#define ATOM_DP_ACTION_BLANKING 0x07 // ucConfig #define ATOM_DP_CONFIG_ENCODER_SEL_MASK 0x03 @@ -4481,17 +5019,6 @@ typedef struct _ATOM_POWERPLAY_INFO_V3 #define ENABLE_LVDS_SS_PARAMETERS_V3 ENABLE_SPREAD_SPECTRUM_ON_PPLL /*********************************************************************************/ -#define ATOM_S3_SCALER2_ACTIVE_H 0x00004000L -#define ATOM_S3_SCALER2_ACTIVE_V 0x00008000L -#define ATOM_S6_REQ_SCALER2_H 0x00004000L -#define ATOM_S6_REQ_SCALER2_V 0x00008000L - -#define ATOM_S3_SCALER1_ACTIVE_H ATOM_S3_LCD_FULLEXPANSION_ACTIVE -#define ATOM_S3_SCALER1_ACTIVE_V ATOM_S3_LCD_EXPANSION_ASPEC_RATIO_ACTIVE - -#define ATOM_S6_REQ_SCALER1_H ATOM_S6_REQ_LCD_EXPANSION_FULL -#define ATOM_S6_REQ_SCALER1_V ATOM_S6_REQ_LCD_EXPANSION_ASPEC_RATIO -//========================================================================================== #pragma pack() // BIOS data must use byte aligment |