diff options
Diffstat (limited to 'linux-core')
-rw-r--r-- | linux-core/nouveau_backlight.c | 93 |
1 files changed, 93 insertions, 0 deletions
diff --git a/linux-core/nouveau_backlight.c b/linux-core/nouveau_backlight.c index 1b36f3cf..3a68d924 100644 --- a/linux-core/nouveau_backlight.c +++ b/linux-core/nouveau_backlight.c @@ -27,6 +27,10 @@ * Authors: * Matthew Garrett <mjg@redhat.com> * + * PowerPC specific stuff: + * Danny Tholen <moondrake@gmail.com> + * (mainly based on info from nvidiafb) + * * Register locations derived from NVClock by Roderick Colenbrander */ @@ -36,9 +40,54 @@ #include "nouveau_drv.h" #include "nouveau_drm.h" #include "nouveau_reg.h" +#ifdef CONFIG_PMAC_BACKLIGHT +#include <asm/backlight.h> +#endif #if defined(CONFIG_BACKLIGHT_CLASS_DEVICE) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,23)) +#ifdef CONFIG_PMAC_BACKLIGHT +static int ppc_get_intensity(struct backlight_device *bd) +{ + struct drm_device *dev = bl_get_data(bd); + struct drm_nouveau_private *dev_priv = dev->dev_private; + int raw_val = (NV_READ(NV_PBUS_DEBUG_DUALHEAD_CTL) & 0x7fff0000) >> 16; + int min_brightness = bd->props.max_brightness / 3; + int intensity = raw_val - min_brightness; + + return (intensity < 0 ? 0 : intensity); +} + +static int ppc_set_intensity(struct backlight_device *bd) +{ + struct drm_device *dev = bl_get_data(bd); + struct drm_nouveau_private *dev_priv = dev->dev_private; + int val = bd->props.brightness; + int min_brightness = bd->props.max_brightness / 3; + int dh_ctl = NV_READ(NV_PBUS_DEBUG_DUALHEAD_CTL) & 0x0000ffff; + int gpio_ext = NV_READ(NV_PCRTC_GPIO_EXT) & ~0x3; + + if (val > 0) { + dh_ctl |= (1 << 31); /* backlight bit on */ + dh_ctl |= (val + min_brightness) << 16; + gpio_ext |= 0x1; + } + + NV_WRITE(NV_PBUS_DEBUG_DUALHEAD_CTL, dh_ctl); + NV_WRITE(NV_PCRTC_GPIO_EXT, gpio_ext); + + return 0; +} + +static struct backlight_ops ppc_bl_ops = { +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,29)) + .options = BL_CORE_SUSPENDRESUME, +#endif + .get_brightness = ppc_get_intensity, + .update_status = ppc_set_intensity, +}; +#endif /* CONFIG_PMAC_BACKLIGHT */ + static int nv40_get_intensity(struct backlight_device *bd) { struct drm_device *dev = bl_get_data(bd); @@ -96,6 +145,45 @@ static struct backlight_ops nv50_bl_ops = { .update_status = nv50_set_intensity, }; +#ifdef CONFIG_PMAC_BACKLIGHT +static int nouveau_ppc_backlight_init(struct drm_device *dev) +{ + struct drm_nouveau_private *dev_priv = dev->dev_private; + struct backlight_device *bd; + int max_brightness; + + if (!machine_is(powermac) || + !pmac_has_backlight_type("mnca")) + return -ENODEV; + + /* "nv_bl0", some old powerpc userland tools rely on this */ + bd = backlight_device_register("nv_bl0", &dev->pdev->dev, dev, + &ppc_bl_ops); + if (IS_ERR(bd)) + return PTR_ERR(bd); + + dev_priv->backlight = bd; + + /* the least significant 15 bits of NV_PBUS_DEBUG_DUALHEAD_CTL + * set the maximum backlight level, OF sets it to 0x535 on my + * powerbook. however, posting the card sets this to 0x7FFF. + * Below 25% the blacklight turns off. + * + * NOTE: pbbuttonsd limits brightness values < 255, and thus + * will not work well with this. + */ + + /* FIXME: do we want to fix this reg to 0x535 for consistency? */ + max_brightness = NV_READ(NV_PBUS_DEBUG_DUALHEAD_CTL) & 0x0000ffff; + /* lose (bottom) 25% of range */ + bd->props.max_brightness = (max_brightness * 3) / 4; + bd->props.brightness = ppc_get_intensity(bd); + backlight_update_status(bd); + + return 0; +} +#endif + static int nouveau_nv40_backlight_init(struct drm_device *dev) { struct drm_nouveau_private *dev_priv = dev->dev_private; @@ -142,6 +230,11 @@ int nouveau_backlight_init(struct drm_device *dev) struct drm_nouveau_private *dev_priv = dev->dev_private; switch (dev_priv->card_type) { +#ifdef CONFIG_PMAC_BACKLIGHT + case NV_17: + case NV_30: + return nouveau_ppc_backlight_init(dev); +#endif case NV_40: case NV_44: return nouveau_nv40_backlight_init(dev); |