diff options
Diffstat (limited to 'linux-core')
| -rw-r--r-- | linux-core/Doxyfile | 517 | ||||
| -rw-r--r-- | linux-core/drm_bufs.c | 1 | ||||
| -rw-r--r-- | linux-core/drm_compat.h | 10 | ||||
| -rw-r--r-- | linux-core/drm_irq.c | 1 | ||||
| -rw-r--r-- | linux-core/drm_memory_debug.h | 2 |
5 files changed, 319 insertions, 212 deletions
diff --git a/linux-core/Doxyfile b/linux-core/Doxyfile index 4bef88f7..ab4fda13 100644 --- a/linux-core/Doxyfile +++ b/linux-core/Doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.3-rc3 +# Doxyfile 1.3.8 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project @@ -11,7 +11,7 @@ # Values that contain spaces should be placed between quotes (" ") #--------------------------------------------------------------------------- -# General configuration options +# Project related configuration options #--------------------------------------------------------------------------- # The PROJECT_NAME tag is a single word (or a sequence of words surrounded @@ -32,17 +32,181 @@ PROJECT_NUMBER = OUTPUT_DIRECTORY = +# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create +# 4096 sub-directories (in 2 levels) under the output directory of each output +# format and will distribute the generated files over these directories. +# Enabling this option can be useful when feeding doxygen a huge amount of source +# files, where putting all generated files in the same directory would otherwise +# cause performance problems for the file system. + +CREATE_SUBDIRS = NO + # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. # The default language is English, other supported languages are: -# Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, Dutch, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en -# (Japanese with english messages), Korean, Norwegian, Polish, Portuguese, -# Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish and Ukrainian. +# Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, +# Dutch, Finnish, French, German, Greek, Hungarian, Italian, Japanese, +# Japanese-en (Japanese with English messages), Korean, Korean-en, Norwegian, +# Polish, Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, +# Swedish, and Ukrainian. OUTPUT_LANGUAGE = English +# This tag can be used to specify the encoding used in the generated output. +# The encoding is not always determined by the language that is chosen, +# but also whether or not the output is meant for Windows or non-Windows users. +# In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES +# forces the Windows encoding (this is the default for the Windows binary), +# whereas setting the tag to NO uses a Unix-style encoding (the default for +# all platforms other than Windows). + +USE_WINDOWS_ENCODING = NO + +# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will +# include brief member descriptions after the members that are listed in +# the file and class documentation (similar to JavaDoc). +# Set to NO to disable this. + +BRIEF_MEMBER_DESC = YES + +# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend +# the brief description of a member or function before the detailed description. +# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the +# brief descriptions will be completely suppressed. + +REPEAT_BRIEF = YES + +# This tag implements a quasi-intelligent brief description abbreviator +# that is used to form the text in various listings. Each string +# in this list, if found as the leading text of the brief description, will be +# stripped from the text and the result after processing the whole list, is used +# as the annotated text. Otherwise, the brief description is used as-is. If left +# blank, the following values are used ("$name" is automatically replaced with the +# name of the entity): "The $name class" "The $name widget" "The $name file" +# "is" "provides" "specifies" "contains" "represents" "a" "an" "the" + +ABBREVIATE_BRIEF = + +# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then +# Doxygen will generate a detailed section even if there is only a brief +# description. + +ALWAYS_DETAILED_SEC = NO + +# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all inherited +# members of a class in the documentation of that class as if those members were +# ordinary class members. Constructors, destructors and assignment operators of +# the base classes will not be shown. + +INLINE_INHERITED_MEMB = NO + +# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full +# path before files name in the file list and in the header files. If set +# to NO the shortest path that makes the file name unique will be used. + +FULL_PATH_NAMES = NO + +# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag +# can be used to strip a user-defined part of the path. Stripping is +# only done if one of the specified strings matches the left-hand part of +# the path. The tag can be used to show relative paths in the file list. +# If left blank the directory from which doxygen is run is used as the +# path to strip. + +STRIP_FROM_PATH = + +# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of +# the path mentioned in the documentation of a class, which tells +# the reader which header file to include in order to use a class. +# If left blank only the name of the header file containing the class +# definition is used. Otherwise one should specify the include paths that +# are normally passed to the compiler using the -I flag. + +STRIP_FROM_INC_PATH = + +# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter +# (but less readable) file names. This can be useful is your file systems +# doesn't support long names like on DOS, Mac, or CD-ROM. + +SHORT_NAMES = NO + +# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen +# will interpret the first line (until the first dot) of a JavaDoc-style +# comment as the brief description. If set to NO, the JavaDoc +# comments will behave just like the Qt-style comments (thus requiring an +# explicit @brief command for a brief description. + +JAVADOC_AUTOBRIEF = YES + +# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen +# treat a multi-line C++ special comment block (i.e. a block of //! or /// +# comments) as a brief description. This used to be the default behaviour. +# The new default is to treat a multi-line C++ comment block as a detailed +# description. Set this tag to YES if you prefer the old behaviour instead. + +MULTILINE_CPP_IS_BRIEF = NO + +# If the DETAILS_AT_TOP tag is set to YES then Doxygen +# will output the detailed description near the top, like JavaDoc. +# If set to NO, the detailed description appears after the member +# documentation. + +DETAILS_AT_TOP = YES + +# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented +# member inherits the documentation from any documented member that it +# re-implements. + +INHERIT_DOCS = YES + +# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC +# tag is set to YES, then doxygen will reuse the documentation of the first +# member in the group (if any) for the other members of the group. By default +# all members of a group must be documented explicitly. + +DISTRIBUTE_GROUP_DOC = NO + +# The TAB_SIZE tag can be used to set the number of spaces in a tab. +# Doxygen uses this value to replace tabs by spaces in code fragments. + +TAB_SIZE = 8 + +# This tag can be used to specify a number of aliases that acts +# as commands in the documentation. An alias has the form "name=value". +# For example adding "sideeffect=\par Side Effects:\n" will allow you to +# put the command \sideeffect (or @sideeffect) in the documentation, which +# will result in a user-defined paragraph with heading "Side Effects:". +# You can put \n's in the value part of an alias to insert newlines. + +ALIASES = + +# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources +# only. Doxygen will then generate output that is more tailored for C. +# For instance, some of the names that are used will be different. The list +# of all members will be omitted, etc. + +OPTIMIZE_OUTPUT_FOR_C = YES + +# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java sources +# only. Doxygen will then generate output that is more tailored for Java. +# For instance, namespaces will be presented as packages, qualified scopes +# will look different, etc. + +OPTIMIZE_OUTPUT_JAVA = NO + +# Set the SUBGROUPING tag to YES (the default) to allow class member groups of +# the same type (for instance a group of public functions) to be put as a +# subgroup of that type (e.g. under the Public Functions section). Set it to +# NO to prevent subgrouping. Alternatively, this can be done per class using +# the \nosubgrouping command. + +SUBGROUPING = YES + +#--------------------------------------------------------------------------- +# Build related configuration options +#--------------------------------------------------------------------------- + # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless @@ -66,6 +230,13 @@ EXTRACT_STATIC = YES EXTRACT_LOCAL_CLASSES = YES +# This flag is only useful for Objective-C code. When set to YES local +# methods, which are defined in the implementation section but not in +# the interface are included in the documentation. +# If set to NO (the default) only methods in the interface are included. + +EXTRACT_LOCAL_METHODS = NO + # If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all # undocumented members of documented classes, files or namespaces. # If set to NO (the default) these members will be included in the @@ -76,7 +247,7 @@ HIDE_UNDOC_MEMBERS = NO # If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all # undocumented classes that are normally visible in the class hierarchy. -# If set to NO (the default) these class will be included in the various +# If set to NO (the default) these classes will be included in the various # overviews. This option has no effect if EXTRACT_ALL is enabled. HIDE_UNDOC_CLASSES = NO @@ -95,46 +266,6 @@ HIDE_FRIEND_COMPOUNDS = NO HIDE_IN_BODY_DOCS = NO -# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will -# include brief member descriptions after the members that are listed in -# the file and class documentation (similar to JavaDoc). -# Set to NO to disable this. - -BRIEF_MEMBER_DESC = YES - -# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend -# the brief description of a member or function before the detailed description. -# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the -# brief descriptions will be completely suppressed. - -REPEAT_BRIEF = YES - -# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then -# Doxygen will generate a detailed section even if there is only a brief -# description. - -ALWAYS_DETAILED_SEC = NO - -# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all inherited -# members of a class in the documentation of that class as if those members were -# ordinary class members. Constructors, destructors and assignment operators of -# the base classes will not be shown. - -INLINE_INHERITED_MEMB = NO - -# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full -# path before files name in the file list and in the header files. If set -# to NO the shortest path that makes the file name unique will be used. - -FULL_PATH_NAMES = NO - -# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag -# can be used to strip a user defined part of the path. Stripping is -# only done if one of the specified strings matches the left-hand part of -# the path. It is allowed to use relative paths in the argument list. - -STRIP_FROM_PATH = - # The INTERNAL_DOCS tag determines if documentation # that is typed after a \internal command is included. If the tag is set # to NO (the default) then the documentation will be excluded. @@ -143,66 +274,25 @@ STRIP_FROM_PATH = INTERNAL_DOCS = NO # If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate -# file names in lower case letters. If set to YES upper case letters are also +# file names in lower-case letters. If set to YES upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# users are adviced to set this option to NO. +# and Mac users are advised to set this option to NO. CASE_SENSE_NAMES = YES -# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter -# (but less readable) file names. This can be useful is your file systems -# doesn't support long names like on DOS, Mac, or CD-ROM. - -SHORT_NAMES = NO - # If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen # will show members with their full class and namespace scopes in the # documentation. If set to YES the scope will be hidden. HIDE_SCOPE_NAMES = NO -# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen -# will generate a verbatim copy of the header file for each class for -# which an include is specified. Set to NO to disable this. - -VERBATIM_HEADERS = NO - # If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen -# will put list of the files that are included by a file in the documentation +# will put a list of the files that are included by a file in the documentation # of that file. SHOW_INCLUDE_FILES = NO -# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen -# will interpret the first line (until the first dot) of a JavaDoc-style -# comment as the brief description. If set to NO, the JavaDoc -# comments will behave just like the Qt-style comments (thus requiring an -# explict @brief command for a brief description. - -JAVADOC_AUTOBRIEF = YES - -# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen -# treat a multi-line C++ special comment block (i.e. a block of //! or /// -# comments) as a brief description. This used to be the default behaviour. -# The new default is to treat a multi-line C++ comment block as a detailed -# description. Set this tag to YES if you prefer the old behaviour instead. - -MULTILINE_CPP_IS_BRIEF = NO - -# If the DETAILS_AT_TOP tag is set to YES then Doxygen -# will output the detailed description near the top, like JavaDoc. -# If set to NO, the detailed description appears after the member -# documentation. - -DETAILS_AT_TOP = YES - -# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented -# member inherits the documentation from any documented member that it -# reimplements. - -INHERIT_DOCS = YES - # If the INLINE_INFO tag is set to YES (the default) then a tag [inline] # is inserted in the documentation for inline members. @@ -215,17 +305,22 @@ INLINE_INFO = YES SORT_MEMBER_DOCS = NO -# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC -# tag is set to YES, then doxygen will reuse the documentation of the first -# member in the group (if any) for the other members of the group. By default -# all members of a group must be documented explicitly. +# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the +# brief documentation of file, namespace and class members alphabetically +# by member name. If set to NO (the default) the members will appear in +# declaration order. -DISTRIBUTE_GROUP_DOC = NO +SORT_BRIEF_DOCS = NO -# The TAB_SIZE tag can be used to set the number of spaces in a tab. -# Doxygen uses this value to replace tabs by spaces in code fragments. +# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be +# sorted by fully-qualified names, including namespaces. If set to +# NO (the default), the class list will be sorted only by class name, +# not including the namespace part. +# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. +# Note: This option applies only to the class list, not to the +# alphabetical list. -TAB_SIZE = 8 +SORT_BY_SCOPE_NAME = NO # The GENERATE_TODOLIST tag can be used to enable (YES) or # disable (NO) the todo list. This list is created by putting \todo @@ -251,22 +346,13 @@ GENERATE_BUGLIST = YES GENERATE_DEPRECATEDLIST= YES -# This tag can be used to specify a number of aliases that acts -# as commands in the documentation. An alias has the form "name=value". -# For example adding "sideeffect=\par Side Effects:\n" will allow you to -# put the command \sideeffect (or @sideeffect) in the documentation, which -# will result in a user defined paragraph with heading "Side Effects:". -# You can put \n's in the value part of an alias to insert newlines. - -ALIASES = - # The ENABLED_SECTIONS tag can be used to enable conditional # documentation sections, marked by \if sectionname ... \endif. ENABLED_SECTIONS = # The MAX_INITIALIZER_LINES tag determines the maximum number of lines -# the initial value of a variable or define consist of for it to appear in +# the initial value of a variable or define consists of for it to appear in # the documentation. If the initializer consists of more lines than specified # here it will be hidden. Use a value of 0 to hide initializers completely. # The appearance of the initializer of individual variables and defines in the @@ -275,20 +361,6 @@ ENABLED_SECTIONS = MAX_INITIALIZER_LINES = 30 -# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources -# only. Doxygen will then generate output that is more tailored for C. -# For instance some of the names that are used will be different. The list -# of all members will be omitted, etc. - -OPTIMIZE_OUTPUT_FOR_C = YES - -# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java sources -# only. Doxygen will then generate output that is more tailored for Java. -# For instance namespaces will be presented as packages, qualified scopes -# will look different, etc. - -OPTIMIZE_OUTPUT_JAVA = NO - # Set the SHOW_USED_FILES tag to NO to disable the list of files generated # at the bottom of the documentation of classes and structs. If set to YES the # list will mention the files that were used to generate the documentation. @@ -345,16 +417,18 @@ WARN_LOGFILE = # directories like "/usr/src/myproject". Separate the files or directories # with spaces. -INPUT = . ../../../shared/drm/kernel +INPUT = . \ + ../shared # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp # and *.h) to filter out the source-files in the directories. If left # blank the following patterns are tested: # *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx *.hpp -# *.h++ *.idl *.odl +# *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm -FILE_PATTERNS = *.c *.h +FILE_PATTERNS = *.c \ + *.h # The RECURSIVE tag can be used to turn specify whether or not subdirectories # should be searched for input files as well. Possible values are YES and NO. @@ -366,7 +440,8 @@ RECURSIVE = NO # excluded from the INPUT source files. This way you can easily exclude a # subdirectory from a directory tree whose root is specified with the INPUT tag. -EXCLUDE = dristat.c drmstat.c +EXCLUDE = dristat.c \ + drmstat.c # The EXCLUDE_SYMLINKS tag can be used select whether or not files or directories # that are symbolic links (a Unix filesystem feature) are excluded from the input. @@ -410,10 +485,20 @@ IMAGE_PATH = # by executing (via popen()) the command <filter> <input-file>, where <filter> # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes -# to standard output. +# to standard output. If FILTER_PATTERNS is specified, this tag will be +# ignored. INPUT_FILTER = +# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern +# basis. Doxygen will compare the file name with each pattern and apply the +# filter if there is a match. The filters are a list of the form: +# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further +# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER +# is applied to all files. + +FILTER_PATTERNS = + # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using # INPUT_FILTER) will be used to filter the input files when producing source # files to browse (i.e. when SOURCE_BROWSER is set to YES). @@ -425,7 +510,9 @@ FILTER_SOURCE_FILES = NO #--------------------------------------------------------------------------- # If the SOURCE_BROWSER tag is set to YES then a list of source files will -# be generated. Documented entities will be cross-referenced with these sources. +# be generated. Documented entities will be cross-referenced with these sources. +# Note: To get rid of all source code in the generated output, make sure also +# VERBATIM_HEADERS is set to NO. SOURCE_BROWSER = NO @@ -452,6 +539,12 @@ REFERENCED_BY_RELATION = YES REFERENCES_RELATION = YES +# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen +# will generate a verbatim copy of the header file for each class for +# which an include is specified. Set to NO to disable this. + +VERBATIM_HEADERS = NO + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -508,10 +601,12 @@ HTML_HEADER = HTML_FOOTER = -# The HTML_STYLESHEET tag can be used to specify a user defined cascading +# The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to # fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet +# will generate a default style sheet. Note that doxygen will try to copy +# the style sheet file to the HTML output directory, so don't put your own +# stylesheet in the HTML output directory as well, or it will be erased! HTML_STYLESHEET = @@ -531,14 +626,14 @@ GENERATE_HTMLHELP = NO # If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can # be used to specify the file name of the resulting .chm file. You # can add a path in front of the file if the result should not be -# written to the html output dir. +# written to the html output directory. CHM_FILE = # If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can # be used to specify the location (absolute path including file name) of -# the HTML help compiler (hhc.exe). If non empty doxygen will try to run -# the html help compiler on the generated index.hhp. +# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run +# the HTML help compiler on the generated index.hhp. HHC_LOCATION = @@ -555,7 +650,7 @@ GENERATE_CHI = NO BINARY_TOC = NO # The TOC_EXPAND flag can be set to YES to add extra items for group members -# to the contents of the Html help documentation and to the tree view. +# to the contents of the HTML help documentation and to the tree view. TOC_EXPAND = NO @@ -573,7 +668,7 @@ ENUM_VALUES_PER_LINE = 4 # If the GENERATE_TREEVIEW tag is set to YES, a side panel will be # generated containing a tree-like index structure (just like the one that # is generated for HTML Help). For this to work a browser that supports -# JavaScript, DHTML, CSS and frames is required (for instance Mozilla, +# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+, # Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are # probably better off using the HTML help feature. @@ -655,12 +750,18 @@ USE_PDFLATEX = NO LATEX_BATCHMODE = NO +# If LATEX_HIDE_INDICES is set to YES then doxygen will not +# include the index chapters (such as File Index, Compound Index, etc.) +# in the output. + +LATEX_HIDE_INDICES = NO + #--------------------------------------------------------------------------- # configuration options related to the RTF output #--------------------------------------------------------------------------- # If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output -# The RTF output is optimised for Word 97 and may not look very pretty with +# The RTF output is optimized for Word 97 and may not look very pretty with # other RTF readers or editors. GENERATE_RTF = NO @@ -687,7 +788,7 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO # Load stylesheet definitions from file. Syntax is similar to doxygen's -# config file, i.e. a series of assigments. You only have to provide +# config file, i.e. a series of assignments. You only have to provide # replacements, missing definitions are set to their default value. RTF_STYLESHEET_FILE = @@ -731,12 +832,16 @@ MAN_LINKS = NO # If the GENERATE_XML tag is set to YES Doxygen will # generate an XML file that captures the structure of -# the code including all documentation. Note that this -# feature is still experimental and incomplete at the -# moment. +# the code including all documentation. GENERATE_XML = NO +# The XML_OUTPUT tag is used to specify where the XML pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `xml' will be used as the default path. + +XML_OUTPUT = xml + # The XML_SCHEMA tag can be used to specify an XML schema, # which can be used by a validating XML parser to check the # syntax of the XML files. @@ -749,6 +854,13 @@ XML_SCHEMA = XML_DTD = +# If the XML_PROGRAMLISTING tag is set to YES Doxygen will +# dump the program listings (including syntax highlighting +# and cross-referencing information) to the XML output. Note that +# enabling this will significantly increase the size of the XML output. + +XML_PROGRAMLISTING = YES + #--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -841,31 +953,29 @@ INCLUDE_FILE_PATTERNS = # or name=definition (no spaces). If the definition and the = are # omitted =1 is assumed. -PREDEFINED = \ - __KERNEL__ \ - "DRM(x)=x" \ - __HAVE_AGP=1 \ - __REALLY_HAVE_AGP=1 \ - __MUST_HAVE_AGP=0 \ - __HAVE_MTRR=1 \ - __HAVE_CTX_BITMAP=1 \ - __HAVE_SG=0 \ - __HAVE_PCI_DMA=0 \ - __HAVE_DMA=1 \ - __HAVE_IRQ=1 \ - __HAVE_VBL_IRQ=1 \ - __HAVE_SHARED_IRQ=1 +PREDEFINED = __KERNEL__ \ + DRM(x)=x \ + __HAVE_AGP=1 \ + __REALLY_HAVE_AGP=1 \ + __MUST_HAVE_AGP=0 \ + __HAVE_MTRR=1 \ + __HAVE_CTX_BITMAP=1 \ + __HAVE_SG=0 \ + __HAVE_PCI_DMA=0 \ + __HAVE_DMA=1 \ + __HAVE_IRQ=1 \ + __HAVE_VBL_IRQ=1 \ + __HAVE_SHARED_IRQ=1 # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then # this tag can be used to specify a list of macro names that should be expanded. # The macro definition that is found in the sources will be used. # Use the PREDEFINED tag if you want to use a different macro definition. -EXPAND_AS_DEFINED = \ - DRMFILE \ - DRM_IOCTL_ARGS \ - DRM_IRQ_ARGS \ - DRM_TASKQUEUE_ARGS +EXPAND_AS_DEFINED = DRMFILE \ + DRM_IOCTL_ARGS \ + DRM_IRQ_ARGS \ + DRM_TASKQUEUE_ARGS # If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then # doxygen's preprocessor will remove all function-like macros that are alone @@ -876,10 +986,23 @@ EXPAND_AS_DEFINED = \ SKIP_FUNCTION_MACROS = YES #--------------------------------------------------------------------------- -# Configuration::addtions related to external references +# Configuration::additions related to external references #--------------------------------------------------------------------------- -# The TAGFILES tag can be used to specify one or more tagfiles. +# The TAGFILES option can be used to specify one or more tagfiles. +# Optionally an initial location of the external documentation +# can be added for each tagfile. The format of a tag file without +# this location is as follows: +# TAGFILES = file1 file2 ... +# Adding location for the tag files is done as follows: +# TAGFILES = file1=loc1 "file2 = loc2" ... +# where "loc1" and "loc2" can be relative or absolute paths or +# URLs. If a location is present for each tag, the installdox tool +# does not have to be run to correct the links. +# Note that each tag file must have a unique name +# (where the name does NOT include the path) +# If a tag file is not located in the directory in which doxygen +# is run, you must also specify the path to the tagfile here. TAGFILES = @@ -910,10 +1033,10 @@ PERL_PATH = /usr/bin/perl #--------------------------------------------------------------------------- # If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will -# generate a inheritance diagram (in Html, RTF and LaTeX) for classes with base or +# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base or # super classes. Setting the tag to NO turns the diagrams off. Note that this -# option is superceded by the HAVE_DOT option below. This is only a fallback. It is -# recommended to install and use dot, since it yield more powerful graphs. +# option is superseded by the HAVE_DOT option below. This is only a fallback. It is +# recommended to install and use dot, since it yields more powerful graphs. CLASS_DIAGRAMS = YES @@ -944,6 +1067,12 @@ CLASS_GRAPH = YES COLLABORATION_GRAPH = YES +# If the UML_LOOK tag is set to YES doxygen will generate inheritance and +# collaboration diagrams in a style similar to the OMG's Unified Modeling +# Language. + +UML_LOOK = NO + # If set to YES, the inheritance and collaboration graphs will show the # relations between templates and their instances. @@ -963,6 +1092,14 @@ INCLUDE_GRAPH = YES INCLUDED_BY_GRAPH = YES +# If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will +# generate a call dependency graph for every global function or class method. +# Note that enabling this option will significantly increase the time of a run. +# So in most cases it will be better to enable call graphs for selected +# functions only using the \callgraph command. + +CALL_GRAPH = NO + # If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen # will graphical hierarchy of all classes instead of a textual one. @@ -1001,6 +1138,17 @@ MAX_DOT_GRAPH_WIDTH = 1024 MAX_DOT_GRAPH_HEIGHT = 1024 +# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the +# graphs generated by dot. A depth value of 3 means that only nodes reachable +# from the root by following a path via at most 3 edges will be shown. Nodes that +# lay further from the root node will be omitted. Note that setting this option to +# 1 or 2 may greatly reduce the computation time needed for large code bases. Also +# note that a graph may be further truncated if the graph's image dimensions are +# not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH and MAX_DOT_GRAPH_HEIGHT). +# If 0 is used for the depth value (the default), the graph is not depth-constrained. + +MAX_DOT_GRAPH_DEPTH = 0 + # If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will # generate a legend page explaining the meaning of the various boxes and # arrows in the dot generated graphs. @@ -1008,51 +1156,16 @@ MAX_DOT_GRAPH_HEIGHT = 1024 GENERATE_LEGEND = YES # If the DOT_CLEANUP tag is set to YES (the default) Doxygen will -# remove the intermedate dot files that are used to generate +# remove the intermediate dot files that are used to generate # the various graphs. DOT_CLEANUP = YES #--------------------------------------------------------------------------- -# Configuration::addtions related to the search engine +# Configuration::additions related to the search engine #--------------------------------------------------------------------------- # The SEARCHENGINE tag specifies whether or not a search engine should be # used. If set to NO the values of all tags below this one will be ignored. SEARCHENGINE = NO - -# The CGI_NAME tag should be the name of the CGI script that -# starts the search engine (doxysearch) with the correct parameters. -# A script with this name will be generated by doxygen. - -CGI_NAME = search.cgi - -# The CGI_URL tag should be the absolute URL to the directory where the -# cgi binaries are located. See the documentation of your http daemon for -# details. - -CGI_URL = - -# The DOC_URL tag should be the absolute URL to the directory where the -# documentation is located. If left blank the absolute path to the -# documentation, with file:// prepended to it, will be used. - -DOC_URL = - -# The DOC_ABSPATH tag should be the absolute path to the directory where the -# documentation is located. If left blank the directory on the local machine -# will be used. - -DOC_ABSPATH = - -# The BIN_ABSPATH tag must point to the directory where the doxysearch binary -# is installed. - -BIN_ABSPATH = /usr/local/bin/ - -# The EXT_DOC_PATHS tag can be used to specify one or more paths to -# documentation generated for other projects. This allows doxysearch to search -# the documentation for these projects as well. - -EXT_DOC_PATHS = diff --git a/linux-core/drm_bufs.c b/linux-core/drm_bufs.c index 6c1ec4c8..46cff57d 100644 --- a/linux-core/drm_bufs.c +++ b/linux-core/drm_bufs.c @@ -370,6 +370,7 @@ int DRM(rmmap)(struct inode *inode, struct file *filp, /** * Cleanup after an error on one of the addbufs() functions. * + * \param dev DRM device. * \param entry buffer entry where the error occurred. * * Frees any pages and buffers associated with the given entry. diff --git a/linux-core/drm_compat.h b/linux-core/drm_compat.h index f5d5824f..f2aa10a3 100644 --- a/linux-core/drm_compat.h +++ b/linux-core/drm_compat.h @@ -1,6 +1,6 @@ /** - * \file drmP.h - * Private header for Direct Rendering Manager + * \file drm_compat.h + * Backward compatability definitions for Direct Rendering Manager * * \author Rickard E. (Rik) Faith <faith@valinux.com> * \author Gareth Hughes <gareth@valinux.com> @@ -34,10 +34,6 @@ #ifndef _DRM_COMPAT_H_ #define _DRM_COMPAT_H_ -/***********************************************************************/ -/** \name Backward compatibility section */ -/*@{*/ - #ifndef minor #define minor(x) MINOR((x)) #endif @@ -157,6 +153,4 @@ static inline void class_simple_set_hotplug(struct class_simple *cs, void (*fn)( #define __x86_64__ #endif -/*@}*/ - #endif diff --git a/linux-core/drm_irq.c b/linux-core/drm_irq.c index 593c9e5b..3e0cfe25 100644 --- a/linux-core/drm_irq.c +++ b/linux-core/drm_irq.c @@ -83,7 +83,6 @@ int DRM(irq_by_busid)(struct inode *inode, struct file *filp, * Install IRQ handler. * * \param dev DRM device. - * \param irq IRQ number. * * Initializes the IRQ related data, and setups drm_device::vbl_queue. Installs the handler, calling the driver * \c DRM(driver_irq_preinstall)() and \c DRM(driver_irq_postinstall)() functions diff --git a/linux-core/drm_memory_debug.h b/linux-core/drm_memory_debug.h index 8b484ad9..fb046965 100644 --- a/linux-core/drm_memory_debug.h +++ b/linux-core/drm_memory_debug.h @@ -1,5 +1,5 @@ /** - * \file drm_memory.h + * \file drm_memory_debug.h * Memory management wrappers for DRM. * * \author Rickard E. (Rik) Faith <faith@valinux.com> |