diff options
Diffstat (limited to 'linux-core/intel_lvds.c')
| -rw-r--r-- | linux-core/intel_lvds.c | 515 |
1 files changed, 515 insertions, 0 deletions
diff --git a/linux-core/intel_lvds.c b/linux-core/intel_lvds.c new file mode 100644 index 00000000..fa8209c7 --- /dev/null +++ b/linux-core/intel_lvds.c @@ -0,0 +1,515 @@ +/* + * Copyright © 2006-2007 Intel Corporation + * Copyright (c) 2006 Dave Airlie <airlied@linux.ie> + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Authors: + * Eric Anholt <eric@anholt.net> + * Dave Airlie <airlied@linux.ie> + * Jesse Barnes <jesse.barnes@intel.com> + */ + +#include <linux/i2c.h> +#include "drmP.h" +#include "drm.h" +#include "drm_crtc.h" +#include "drm_edid.h" +#include "intel_drv.h" +#include "i915_drm.h" +#include "i915_drv.h" + +/** + * Sets the backlight level. + * + * \param level backlight level, from 0 to intel_lvds_get_max_backlight(). + */ +static void intel_lvds_set_backlight(struct drm_device *dev, int level) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + u32 blc_pwm_ctl; + + blc_pwm_ctl = I915_READ(BLC_PWM_CTL) & ~BACKLIGHT_DUTY_CYCLE_MASK; + I915_WRITE(BLC_PWM_CTL, (blc_pwm_ctl | + (level << BACKLIGHT_DUTY_CYCLE_SHIFT))); +} + +/** + * Returns the maximum level of the backlight duty cycle field. + */ +static u32 intel_lvds_get_max_backlight(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + return ((I915_READ(BLC_PWM_CTL) & BACKLIGHT_MODULATION_FREQ_MASK) >> + BACKLIGHT_MODULATION_FREQ_SHIFT) * 2; +} + +/** + * Sets the power state for the panel. + */ +static void intel_lvds_set_power(struct drm_device *dev, bool on) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + u32 pp_status; + + if (on) { + I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) | + POWER_TARGET_ON); + do { + pp_status = I915_READ(PP_STATUS); + } while ((pp_status & PP_ON) == 0); + + intel_lvds_set_backlight(dev, dev_priv->backlight_duty_cycle); + } else { + intel_lvds_set_backlight(dev, 0); + + I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) & + ~POWER_TARGET_ON); + do { + pp_status = I915_READ(PP_STATUS); + } while (pp_status & PP_ON); + } +} + +static void intel_lvds_dpms(struct drm_encoder *encoder, int mode) +{ + struct drm_device *dev = encoder->dev; + + if (mode == DRM_MODE_DPMS_ON) + intel_lvds_set_power(dev, true); + else + intel_lvds_set_power(dev, false); + + /* XXX: We never power down the LVDS pairs. */ +} + +static void intel_lvds_save(struct drm_connector *connector) +{ + struct drm_device *dev = connector->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + + dev_priv->savePP_ON = I915_READ(PP_ON_DELAYS); + dev_priv->savePP_OFF = I915_READ(PP_OFF_DELAYS); + dev_priv->savePP_CONTROL = I915_READ(PP_CONTROL); + dev_priv->savePP_DIVISOR = I915_READ(PP_DIVISOR); + dev_priv->saveBLC_PWM_CTL = I915_READ(BLC_PWM_CTL); + dev_priv->backlight_duty_cycle = (dev_priv->saveBLC_PWM_CTL & + BACKLIGHT_DUTY_CYCLE_MASK); + + /* + * If the light is off at server startup, just make it full brightness + */ + if (dev_priv->backlight_duty_cycle == 0) + dev_priv->backlight_duty_cycle = + intel_lvds_get_max_backlight(dev); +} + +static void intel_lvds_restore(struct drm_connector *connector) +{ + struct drm_device *dev = connector->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + + I915_WRITE(BLC_PWM_CTL, dev_priv->saveBLC_PWM_CTL); + I915_WRITE(PP_ON_DELAYS, dev_priv->savePP_ON); + I915_WRITE(PP_OFF_DELAYS, dev_priv->savePP_OFF); + I915_WRITE(PP_DIVISOR, dev_priv->savePP_DIVISOR); + I915_WRITE(PP_CONTROL, dev_priv->savePP_CONTROL); + if (dev_priv->savePP_CONTROL & POWER_TARGET_ON) + intel_lvds_set_power(dev, true); + else + intel_lvds_set_power(dev, false); +} + +static int intel_lvds_mode_valid(struct drm_connector *connector, + struct drm_display_mode *mode) +{ + struct drm_device *dev = connector->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_display_mode *fixed_mode = dev_priv->panel_fixed_mode; + + if (fixed_mode) { + if (mode->hdisplay > fixed_mode->hdisplay) + return MODE_PANEL; + if (mode->vdisplay > fixed_mode->vdisplay) + return MODE_PANEL; + } + + return MODE_OK; +} + +static bool intel_lvds_mode_fixup(struct drm_encoder *encoder, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct drm_device *dev = encoder->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc); + struct drm_encoder *tmp_encoder; + + /* Should never happen!! */ + if (!IS_I965G(dev) && intel_crtc->pipe == 0) { + printk(KERN_ERR "Can't support LVDS on pipe A\n"); + return false; + } + + /* Should never happen!! */ + list_for_each_entry(tmp_encoder, &dev->mode_config.encoder_list, head) { + if (tmp_encoder != encoder && tmp_encoder->crtc == encoder->crtc) { + printk(KERN_ERR "Can't enable LVDS and another " + "encoder on the same pipe\n"); + return false; + } + } + + /* + * If we have timings from the BIOS for the panel, put them in + * to the adjusted mode. The CRTC will be set up for this mode, + * with the panel scaling set up to source from the H/VDisplay + * of the original mode. + */ + if (dev_priv->panel_fixed_mode != NULL) { + adjusted_mode->hdisplay = dev_priv->panel_fixed_mode->hdisplay; + adjusted_mode->hsync_start = + dev_priv->panel_fixed_mode->hsync_start; + adjusted_mode->hsync_end = + dev_priv->panel_fixed_mode->hsync_end; + adjusted_mode->htotal = dev_priv->panel_fixed_mode->htotal; + adjusted_mode->vdisplay = dev_priv->panel_fixed_mode->vdisplay; + adjusted_mode->vsync_start = + dev_priv->panel_fixed_mode->vsync_start; + adjusted_mode->vsync_end = + dev_priv->panel_fixed_mode->vsync_end; + adjusted_mode->vtotal = dev_priv->panel_fixed_mode->vtotal; + adjusted_mode->clock = dev_priv->panel_fixed_mode->clock; + drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V); + } + + /* + * XXX: It would be nice to support lower refresh rates on the + * panels to reduce power consumption, and perhaps match the + * user's requested refresh rate. + */ + + return true; +} + +static void intel_lvds_prepare(struct drm_encoder *encoder) +{ + struct drm_device *dev = encoder->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + + dev_priv->saveBLC_PWM_CTL = I915_READ(BLC_PWM_CTL); + dev_priv->backlight_duty_cycle = (dev_priv->saveBLC_PWM_CTL & + BACKLIGHT_DUTY_CYCLE_MASK); + + intel_lvds_set_power(dev, false); +} + +static void intel_lvds_commit( struct drm_encoder *encoder) +{ + struct drm_device *dev = encoder->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + + if (dev_priv->backlight_duty_cycle == 0) + dev_priv->backlight_duty_cycle = + intel_lvds_get_max_backlight(dev); + + intel_lvds_set_power(dev, true); +} + +static void intel_lvds_mode_set(struct drm_encoder *encoder, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct drm_device *dev = encoder->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc); + u32 pfit_control; + + /* + * The LVDS pin pair will already have been turned on in the + * intel_crtc_mode_set since it has a large impact on the DPLL + * settings. + */ + + /* + * Enable automatic panel scaling so that non-native modes fill the + * screen. Should be enabled before the pipe is enabled, according to + * register description and PRM. + */ + if (mode->hdisplay != adjusted_mode->hdisplay || + mode->vdisplay != adjusted_mode->vdisplay) + pfit_control = (PFIT_ENABLE | VERT_AUTO_SCALE | + HORIZ_AUTO_SCALE | VERT_INTERP_BILINEAR | + HORIZ_INTERP_BILINEAR); + else + pfit_control = 0; + + if (!IS_I965G(dev)) { + if (dev_priv->panel_wants_dither) + pfit_control |= PANEL_8TO6_DITHER_ENABLE; + } + else + pfit_control |= intel_crtc->pipe << PFIT_PIPE_SHIFT; + + I915_WRITE(PFIT_CONTROL, pfit_control); +} + +/** + * Detect the LVDS connection. + * + * This always returns CONNECTOR_STATUS_CONNECTED. This connector should only have + * been set up if the LVDS was actually connected anyway. + */ +static enum drm_connector_status intel_lvds_detect(struct drm_connector *connector) +{ + return connector_status_connected; +} + +/** + * Return the list of DDC modes if available, or the BIOS fixed mode otherwise. + */ +static int intel_lvds_get_modes(struct drm_connector *connector) +{ + struct drm_device *dev = connector->dev; + struct intel_output *intel_output = to_intel_output(connector); + struct drm_i915_private *dev_priv = dev->dev_private; + int ret = 0; + + ret = intel_ddc_get_modes(intel_output); + + if (ret) + return ret; + + /* Didn't get an EDID, so + * Set wide sync ranges so we get all modes + * handed to valid_mode for checking + */ + connector->display_info.min_vfreq = 0; + connector->display_info.max_vfreq = 200; + connector->display_info.min_hfreq = 0; + connector->display_info.max_hfreq = 200; + + if (dev_priv->panel_fixed_mode != NULL) { + struct drm_display_mode *mode = + drm_mode_duplicate(dev, dev_priv->panel_fixed_mode); + drm_mode_probed_add(connector, mode); + return 1; + } + + return 0; +} + +/** + * intel_lvds_destroy - unregister and free LVDS structures + * @connector: connector to free + * + * Unregister the DDC bus for this connector then free the driver private + * structure. + */ +static void intel_lvds_destroy(struct drm_connector *connector) +{ + struct intel_output *intel_output = to_intel_output(connector); + + if (intel_output->ddc_bus) + intel_i2c_destroy(intel_output->ddc_bus); + drm_sysfs_connector_remove(connector); + drm_connector_cleanup(connector); + kfree(connector); +} + +static const struct drm_encoder_helper_funcs intel_lvds_helper_funcs = { + .dpms = intel_lvds_dpms, + .mode_fixup = intel_lvds_mode_fixup, + .prepare = intel_lvds_prepare, + .mode_set = intel_lvds_mode_set, + .commit = intel_lvds_commit, +}; + +static const struct drm_connector_helper_funcs intel_lvds_connector_helper_funcs = { + .get_modes = intel_lvds_get_modes, + .mode_valid = intel_lvds_mode_valid, + .best_encoder = intel_best_encoder, +}; + +static const struct drm_connector_funcs intel_lvds_connector_funcs = { + .save = intel_lvds_save, + .restore = intel_lvds_restore, + .detect = intel_lvds_detect, + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = intel_lvds_destroy, +}; + + +static void intel_lvds_enc_destroy(struct drm_encoder *encoder) +{ + drm_encoder_cleanup(encoder); +} + +static const struct drm_encoder_funcs intel_lvds_enc_funcs = { + .destroy = intel_lvds_enc_destroy, +}; + + + +/** + * intel_lvds_init - setup LVDS connectors on this device + * @dev: drm device + * + * Create the connector, register the LVDS DDC bus, and try to figure out what + * modes we can display on the LVDS panel (if present). + */ +void intel_lvds_init(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_output *intel_output; + struct drm_connector *connector; + struct drm_encoder *encoder; + struct drm_display_mode *scan; /* *modes, *bios_mode; */ + struct drm_crtc *crtc; + u32 lvds; + int pipe; + + intel_output = kzalloc(sizeof(struct intel_output), GFP_KERNEL); + if (!intel_output) { + return; + } + + connector = &intel_output->base; + encoder = &intel_output->enc; + drm_connector_init(dev, &intel_output->base, &intel_lvds_connector_funcs, + DRM_MODE_CONNECTOR_LVDS); + + drm_encoder_init(dev, &intel_output->enc, &intel_lvds_enc_funcs, + DRM_MODE_ENCODER_LVDS); + + drm_mode_connector_attach_encoder(&intel_output->base, &intel_output->enc); + intel_output->type = INTEL_OUTPUT_LVDS; + + drm_encoder_helper_add(encoder, &intel_lvds_helper_funcs); + drm_connector_helper_add(connector, &intel_lvds_connector_helper_funcs); + connector->display_info.subpixel_order = SubPixelHorizontalRGB; + connector->interlace_allowed = false; + connector->doublescan_allowed = false; + + + /* + * LVDS discovery: + * 1) check for EDID on DDC + * 2) check for VBT data + * 3) check to see if LVDS is already on + * if none of the above, no panel + * 4) make sure lid is open + * if closed, act like it's not there for now + */ + + /* Set up the DDC bus. */ + intel_output->ddc_bus = intel_i2c_create(dev, GPIOC, "LVDSDDC_C"); + if (!intel_output->ddc_bus) { + dev_printk(KERN_ERR, &dev->pdev->dev, "DDC bus registration " + "failed.\n"); + goto failed; + } + + /* + * Attempt to get the fixed panel mode from DDC. Assume that the + * preferred mode is the right one. + */ + intel_ddc_get_modes(intel_output); + + list_for_each_entry(scan, &connector->probed_modes, head) { + if (scan->type & DRM_MODE_TYPE_PREFERRED) { + dev_priv->panel_fixed_mode = + drm_mode_duplicate(dev, scan); + goto out; /* FIXME: check for quirks */ + } + } + + /* Failed to get EDID, what about VBT? */ + if (dev_priv->vbt_mode) + dev_priv->panel_fixed_mode = + drm_mode_duplicate(dev, dev_priv->vbt_mode); + + /* + * If we didn't get EDID, try checking if the panel is already turned + * on. If so, assume that whatever is currently programmed is the + * correct mode. + */ + lvds = I915_READ(LVDS); + pipe = (lvds & LVDS_PIPEB_SELECT) ? 1 : 0; + crtc = intel_get_crtc_from_pipe(dev, pipe); + + if (crtc && (lvds & LVDS_PORT_EN)) { + dev_priv->panel_fixed_mode = intel_crtc_mode_get(dev, crtc); + if (dev_priv->panel_fixed_mode) { + dev_priv->panel_fixed_mode->type |= + DRM_MODE_TYPE_PREFERRED; + goto out; /* FIXME: check for quirks */ + } + } + + /* If we still don't have a mode after all that, give up. */ + if (!dev_priv->panel_fixed_mode) + goto failed; + + /* FIXME: detect aopen & mac mini type stuff automatically? */ + /* + * Blacklist machines with BIOSes that list an LVDS panel without + * actually having one. + */ + if (IS_I945GM(dev)) { + /* aopen mini pc */ + if (dev->pdev->subsystem_vendor == 0xa0a0) + goto failed; + + if ((dev->pdev->subsystem_vendor == 0x8086) && + (dev->pdev->subsystem_device == 0x7270)) { + /* It's a Mac Mini or Macbook Pro. + * + * Apple hardware is out to get us. The macbook pro + * has a real LVDS panel, but the mac mini does not, + * and they have the same device IDs. We'll + * distinguish by panel size, on the assumption + * that Apple isn't about to make any machines with an + * 800x600 display. + */ + + if (dev_priv->panel_fixed_mode != NULL && + dev_priv->panel_fixed_mode->hdisplay == 800 && + dev_priv->panel_fixed_mode->vdisplay == 600) { + DRM_DEBUG("Suspected Mac Mini, ignoring the LVDS\n"); + goto failed; + } + } + } + + +out: + drm_sysfs_connector_add(connector); + return; + +failed: + DRM_DEBUG("No LVDS modes found, disabling.\n"); + if (intel_output->ddc_bus) + intel_i2c_destroy(intel_output->ddc_bus); + drm_connector_cleanup(connector); + kfree(connector); +} |