summaryrefslogtreecommitdiff
path: root/linux-core/intel_display.c
diff options
context:
space:
mode:
Diffstat (limited to 'linux-core/intel_display.c')
-rw-r--r--linux-core/intel_display.c1235
1 files changed, 1235 insertions, 0 deletions
diff --git a/linux-core/intel_display.c b/linux-core/intel_display.c
new file mode 100644
index 00000000..a81cfe69
--- /dev/null
+++ b/linux-core/intel_display.c
@@ -0,0 +1,1235 @@
+/*
+ * Copyright © 2006-2007 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ * Eric Anholt <eric@anholt.net>
+ */
+
+#include <linux/i2c.h>
+#include "drmP.h"
+#include "intel_drv.h"
+#include "i915_drm.h"
+#include "i915_drv.h"
+
+bool intel_pipe_has_type (struct drm_crtc *crtc, int type);
+
+typedef struct {
+ /* given values */
+ int n;
+ int m1, m2;
+ int p1, p2;
+ /* derived values */
+ int dot;
+ int vco;
+ int m;
+ int p;
+} intel_clock_t;
+
+typedef struct {
+ int min, max;
+} intel_range_t;
+
+typedef struct {
+ int dot_limit;
+ int p2_slow, p2_fast;
+} intel_p2_t;
+
+#define INTEL_P2_NUM 2
+
+typedef struct {
+ intel_range_t dot, vco, n, m, m1, m2, p, p1;
+ intel_p2_t p2;
+} intel_limit_t;
+
+#define I8XX_DOT_MIN 25000
+#define I8XX_DOT_MAX 350000
+#define I8XX_VCO_MIN 930000
+#define I8XX_VCO_MAX 1400000
+#define I8XX_N_MIN 3
+#define I8XX_N_MAX 16
+#define I8XX_M_MIN 96
+#define I8XX_M_MAX 140
+#define I8XX_M1_MIN 18
+#define I8XX_M1_MAX 26
+#define I8XX_M2_MIN 6
+#define I8XX_M2_MAX 16
+#define I8XX_P_MIN 4
+#define I8XX_P_MAX 128
+#define I8XX_P1_MIN 2
+#define I8XX_P1_MAX 33
+#define I8XX_P1_LVDS_MIN 1
+#define I8XX_P1_LVDS_MAX 6
+#define I8XX_P2_SLOW 4
+#define I8XX_P2_FAST 2
+#define I8XX_P2_LVDS_SLOW 14
+#define I8XX_P2_LVDS_FAST 14 /* No fast option */
+#define I8XX_P2_SLOW_LIMIT 165000
+
+#define I9XX_DOT_MIN 20000
+#define I9XX_DOT_MAX 400000
+#define I9XX_VCO_MIN 1400000
+#define I9XX_VCO_MAX 2800000
+#define I9XX_N_MIN 3
+#define I9XX_N_MAX 8
+#define I9XX_M_MIN 70
+#define I9XX_M_MAX 120
+#define I9XX_M1_MIN 10
+#define I9XX_M1_MAX 20
+#define I9XX_M2_MIN 5
+#define I9XX_M2_MAX 9
+#define I9XX_P_SDVO_DAC_MIN 5
+#define I9XX_P_SDVO_DAC_MAX 80
+#define I9XX_P_LVDS_MIN 7
+#define I9XX_P_LVDS_MAX 98
+#define I9XX_P1_MIN 1
+#define I9XX_P1_MAX 8
+#define I9XX_P2_SDVO_DAC_SLOW 10
+#define I9XX_P2_SDVO_DAC_FAST 5
+#define I9XX_P2_SDVO_DAC_SLOW_LIMIT 200000
+#define I9XX_P2_LVDS_SLOW 14
+#define I9XX_P2_LVDS_FAST 7
+#define I9XX_P2_LVDS_SLOW_LIMIT 112000
+
+#define INTEL_LIMIT_I8XX_DVO_DAC 0
+#define INTEL_LIMIT_I8XX_LVDS 1
+#define INTEL_LIMIT_I9XX_SDVO_DAC 2
+#define INTEL_LIMIT_I9XX_LVDS 3
+
+static const intel_limit_t intel_limits[] = {
+ { /* INTEL_LIMIT_I8XX_DVO_DAC */
+ .dot = { .min = I8XX_DOT_MIN, .max = I8XX_DOT_MAX },
+ .vco = { .min = I8XX_VCO_MIN, .max = I8XX_VCO_MAX },
+ .n = { .min = I8XX_N_MIN, .max = I8XX_N_MAX },
+ .m = { .min = I8XX_M_MIN, .max = I8XX_M_MAX },
+ .m1 = { .min = I8XX_M1_MIN, .max = I8XX_M1_MAX },
+ .m2 = { .min = I8XX_M2_MIN, .max = I8XX_M2_MAX },
+ .p = { .min = I8XX_P_MIN, .max = I8XX_P_MAX },
+ .p1 = { .min = I8XX_P1_MIN, .max = I8XX_P1_MAX },
+ .p2 = { .dot_limit = I8XX_P2_SLOW_LIMIT,
+ .p2_slow = I8XX_P2_SLOW, .p2_fast = I8XX_P2_FAST },
+ },
+ { /* INTEL_LIMIT_I8XX_LVDS */
+ .dot = { .min = I8XX_DOT_MIN, .max = I8XX_DOT_MAX },
+ .vco = { .min = I8XX_VCO_MIN, .max = I8XX_VCO_MAX },
+ .n = { .min = I8XX_N_MIN, .max = I8XX_N_MAX },
+ .m = { .min = I8XX_M_MIN, .max = I8XX_M_MAX },
+ .m1 = { .min = I8XX_M1_MIN, .max = I8XX_M1_MAX },
+ .m2 = { .min = I8XX_M2_MIN, .max = I8XX_M2_MAX },
+ .p = { .min = I8XX_P_MIN, .max = I8XX_P_MAX },
+ .p1 = { .min = I8XX_P1_LVDS_MIN, .max = I8XX_P1_LVDS_MAX },
+ .p2 = { .dot_limit = I8XX_P2_SLOW_LIMIT,
+ .p2_slow = I8XX_P2_LVDS_SLOW, .p2_fast = I8XX_P2_LVDS_FAST },
+ },
+ { /* INTEL_LIMIT_I9XX_SDVO_DAC */
+ .dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX },
+ .vco = { .min = I9XX_VCO_MIN, .max = I9XX_VCO_MAX },
+ .n = { .min = I9XX_N_MIN, .max = I9XX_N_MAX },
+ .m = { .min = I9XX_M_MIN, .max = I9XX_M_MAX },
+ .m1 = { .min = I9XX_M1_MIN, .max = I9XX_M1_MAX },
+ .m2 = { .min = I9XX_M2_MIN, .max = I9XX_M2_MAX },
+ .p = { .min = I9XX_P_SDVO_DAC_MIN, .max = I9XX_P_SDVO_DAC_MAX },
+ .p1 = { .min = I9XX_P1_MIN, .max = I9XX_P1_MAX },
+ .p2 = { .dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT,
+ .p2_slow = I9XX_P2_SDVO_DAC_SLOW, .p2_fast = I9XX_P2_SDVO_DAC_FAST },
+ },
+ { /* INTEL_LIMIT_I9XX_LVDS */
+ .dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX },
+ .vco = { .min = I9XX_VCO_MIN, .max = I9XX_VCO_MAX },
+ .n = { .min = I9XX_N_MIN, .max = I9XX_N_MAX },
+ .m = { .min = I9XX_M_MIN, .max = I9XX_M_MAX },
+ .m1 = { .min = I9XX_M1_MIN, .max = I9XX_M1_MAX },
+ .m2 = { .min = I9XX_M2_MIN, .max = I9XX_M2_MAX },
+ .p = { .min = I9XX_P_LVDS_MIN, .max = I9XX_P_LVDS_MAX },
+ .p1 = { .min = I9XX_P1_MIN, .max = I9XX_P1_MAX },
+ /* The single-channel range is 25-112Mhz, and dual-channel
+ * is 80-224Mhz. Prefer single channel as much as possible.
+ */
+ .p2 = { .dot_limit = I9XX_P2_LVDS_SLOW_LIMIT,
+ .p2_slow = I9XX_P2_LVDS_SLOW, .p2_fast = I9XX_P2_LVDS_FAST },
+ },
+};
+
+static const intel_limit_t *intel_limit(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ const intel_limit_t *limit;
+
+ if (IS_I9XX(dev)) {
+ if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
+ limit = &intel_limits[INTEL_LIMIT_I9XX_LVDS];
+ else
+ limit = &intel_limits[INTEL_LIMIT_I9XX_SDVO_DAC];
+ } else {
+ if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
+ limit = &intel_limits[INTEL_LIMIT_I8XX_LVDS];
+ else
+ limit = &intel_limits[INTEL_LIMIT_I8XX_DVO_DAC];
+ }
+ return limit;
+}
+
+/** Derive the pixel clock for the given refclk and divisors for 8xx chips. */
+
+static void i8xx_clock(int refclk, intel_clock_t *clock)
+{
+ clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2);
+ clock->p = clock->p1 * clock->p2;
+ clock->vco = refclk * clock->m / (clock->n + 2);
+ clock->dot = clock->vco / clock->p;
+}
+
+/** Derive the pixel clock for the given refclk and divisors for 9xx chips. */
+
+static void i9xx_clock(int refclk, intel_clock_t *clock)
+{
+ clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2);
+ clock->p = clock->p1 * clock->p2;
+ clock->vco = refclk * clock->m / (clock->n + 2);
+ clock->dot = clock->vco / clock->p;
+}
+
+static void intel_clock(struct drm_device *dev, int refclk,
+ intel_clock_t *clock)
+{
+ if (IS_I9XX(dev))
+ return i9xx_clock (refclk, clock);
+ else
+ return i8xx_clock (refclk, clock);
+}
+
+/**
+ * Returns whether any output on the specified pipe is of the specified type
+ */
+bool intel_pipe_has_type (struct drm_crtc *crtc, int type)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_mode_config *mode_config = &dev->mode_config;
+ struct drm_output *l_entry;
+
+ list_for_each_entry(l_entry, &mode_config->output_list, head) {
+ if (l_entry->crtc == crtc) {
+ struct intel_output *intel_output = l_entry->driver_private;
+ if (intel_output->type == type)
+ return true;
+ }
+ }
+ return false;
+}
+
+#define INTELPllInvalid(s) { /* ErrorF (s) */; return false; }
+/**
+ * Returns whether the given set of divisors are valid for a given refclk with
+ * the given outputs.
+ */
+
+static bool intel_PLL_is_valid(struct drm_crtc *crtc, intel_clock_t *clock)
+{
+ const intel_limit_t *limit = intel_limit (crtc);
+
+ if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1)
+ INTELPllInvalid ("p1 out of range\n");
+ if (clock->p < limit->p.min || limit->p.max < clock->p)
+ INTELPllInvalid ("p out of range\n");
+ if (clock->m2 < limit->m2.min || limit->m2.max < clock->m2)
+ INTELPllInvalid ("m2 out of range\n");
+ if (clock->m1 < limit->m1.min || limit->m1.max < clock->m1)
+ INTELPllInvalid ("m1 out of range\n");
+ if (clock->m1 <= clock->m2)
+ INTELPllInvalid ("m1 <= m2\n");
+ if (clock->m < limit->m.min || limit->m.max < clock->m)
+ INTELPllInvalid ("m out of range\n");
+ if (clock->n < limit->n.min || limit->n.max < clock->n)
+ INTELPllInvalid ("n out of range\n");
+ if (clock->vco < limit->vco.min || limit->vco.max < clock->vco)
+ INTELPllInvalid ("vco out of range\n");
+ /* XXX: We may need to be checking "Dot clock" depending on the multiplier,
+ * output, etc., rather than just a single range.
+ */
+ if (clock->dot < limit->dot.min || limit->dot.max < clock->dot)
+ INTELPllInvalid ("dot out of range\n");
+
+ return true;
+}
+
+/**
+ * Returns a set of divisors for the desired target clock with the given
+ * refclk, or FALSE. The returned values represent the clock equation:
+ * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
+ */
+static bool intel_find_best_PLL(struct drm_crtc *crtc, int target,
+ int refclk, intel_clock_t *best_clock)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ intel_clock_t clock;
+ const intel_limit_t *limit = intel_limit(crtc);
+ int err = target;
+
+ if (IS_I9XX(dev) && intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
+ (I915_READ(LVDS) & LVDS_PORT_EN) != 0) {
+ /*
+ * For LVDS, if the panel is on, just rely on its current
+ * settings for dual-channel. We haven't figured out how to
+ * reliably set up different single/dual channel state, if we
+ * even can.
+ */
+ if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
+ LVDS_CLKB_POWER_UP)
+ clock.p2 = limit->p2.p2_fast;
+ else
+ clock.p2 = limit->p2.p2_slow;
+ } else {
+ if (target < limit->p2.dot_limit)
+ clock.p2 = limit->p2.p2_slow;
+ else
+ clock.p2 = limit->p2.p2_fast;
+ }
+
+ memset (best_clock, 0, sizeof (*best_clock));
+
+ for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) {
+ for (clock.m2 = limit->m2.min; clock.m2 < clock.m1 &&
+ clock.m2 <= limit->m2.max; clock.m2++) {
+ for (clock.n = limit->n.min; clock.n <= limit->n.max;
+ clock.n++) {
+ for (clock.p1 = limit->p1.min;
+ clock.p1 <= limit->p1.max; clock.p1++) {
+ int this_err;
+
+ intel_clock(dev, refclk, &clock);
+
+ if (!intel_PLL_is_valid(crtc, &clock))
+ continue;
+
+ this_err = abs(clock.dot - target);
+ if (this_err < err) {
+ *best_clock = clock;
+ err = this_err;
+ }
+ }
+ }
+ }
+ }
+
+ return (err != target);
+}
+
+void
+intel_set_vblank(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct drm_crtc *crtc;
+ struct intel_crtc *intel_crtc;
+ int vbl_pipe = 0;
+
+ list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+ intel_crtc = crtc->driver_private;
+
+ if (crtc->enabled)
+ vbl_pipe |= (1<<intel_crtc->pipe);
+ }
+
+ dev_priv->vblank_pipe = vbl_pipe;
+ i915_enable_interrupt(dev);
+}
+void
+intel_wait_for_vblank(struct drm_device *dev)
+{
+ /* Wait for 20ms, i.e. one cycle at 50hz. */
+ udelay(20000);
+}
+
+void
+intel_pipe_set_base(struct drm_crtc *crtc, int x, int y)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = crtc->driver_private;
+ int pipe = intel_crtc->pipe;
+ unsigned long Start, Offset;
+ int dspbase = (pipe == 0 ? DSPABASE : DSPBBASE);
+ int dspsurf = (pipe == 0 ? DSPASURF : DSPBSURF);
+
+ Start = crtc->fb->offset;
+ Offset = y * crtc->fb->pitch + x;
+
+ DRM_DEBUG("Writing base %08lX %08lX %d %d\n", Start, Offset, x, y);
+ if (IS_I965G(dev)) {
+ I915_WRITE(dspbase, Offset);
+ I915_READ(dspbase);
+ I915_WRITE(dspsurf, Start);
+ I915_READ(dspsurf);
+ } else {
+ I915_WRITE(dspbase, Start + Offset);
+ I915_READ(dspbase);
+ }
+
+
+ if (!dev_priv->sarea_priv)
+ return;
+
+ switch (pipe) {
+ case 0:
+ dev_priv->sarea_priv->planeA_x = x;
+ dev_priv->sarea_priv->planeA_y = y;
+ break;
+ case 1:
+ dev_priv->sarea_priv->planeB_x = x;
+ dev_priv->sarea_priv->planeB_y = y;
+ break;
+ default:
+ DRM_ERROR("Can't update pipe %d in SAREA\n", pipe);
+ break;
+ }
+}
+
+/**
+ * Sets the power management mode of the pipe and plane.
+ *
+ * This code should probably grow support for turning the cursor off and back
+ * on appropriately at the same time as we're turning the pipe off/on.
+ */
+static void intel_crtc_dpms(struct drm_crtc *crtc, int mode)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = crtc->driver_private;
+ int pipe = intel_crtc->pipe;
+ int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
+ int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR;
+ int dspbase_reg = (pipe == 0) ? DSPABASE : DSPBBASE;
+ int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
+ u32 temp;
+ bool enabled;
+
+ /* XXX: When our outputs are all unaware of DPMS modes other than off
+ * and on, we should map those modes to DPMSModeOff in the CRTC.
+ */
+ switch (mode) {
+ case DPMSModeOn:
+ case DPMSModeStandby:
+ case DPMSModeSuspend:
+ /* Enable the DPLL */
+ temp = I915_READ(dpll_reg);
+ if ((temp & DPLL_VCO_ENABLE) == 0) {
+ I915_WRITE(dpll_reg, temp);
+ I915_READ(dpll_reg);
+ /* Wait for the clocks to stabilize. */
+ udelay(150);
+ I915_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE);
+ I915_READ(dpll_reg);
+ /* Wait for the clocks to stabilize. */
+ udelay(150);
+ I915_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE);
+ I915_READ(dpll_reg);
+ /* Wait for the clocks to stabilize. */
+ udelay(150);
+ }
+
+ /* Enable the pipe */
+ temp = I915_READ(pipeconf_reg);
+ if ((temp & PIPEACONF_ENABLE) == 0)
+ I915_WRITE(pipeconf_reg, temp | PIPEACONF_ENABLE);
+
+ /* Enable the plane */
+ temp = I915_READ(dspcntr_reg);
+ if ((temp & DISPLAY_PLANE_ENABLE) == 0) {
+ I915_WRITE(dspcntr_reg, temp | DISPLAY_PLANE_ENABLE);
+ /* Flush the plane changes */
+ I915_WRITE(dspbase_reg, I915_READ(dspbase_reg));
+ }
+
+ intel_crtc_load_lut(crtc);
+
+ /* Give the overlay scaler a chance to enable if it's on this pipe */
+ //intel_crtc_dpms_video(crtc, TRUE); TODO
+ break;
+ case DPMSModeOff:
+ /* Give the overlay scaler a chance to disable if it's on this pipe */
+ //intel_crtc_dpms_video(crtc, FALSE); TODO
+
+ /* Disable the VGA plane that we never use */
+ I915_WRITE(VGACNTRL, VGA_DISP_DISABLE);
+
+ /* Disable display plane */
+ temp = I915_READ(dspcntr_reg);
+ if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
+ I915_WRITE(dspcntr_reg, temp & ~DISPLAY_PLANE_ENABLE);
+ /* Flush the plane changes */
+ I915_WRITE(dspbase_reg, I915_READ(dspbase_reg));
+ I915_READ(dspbase_reg);
+ }
+
+ if (!IS_I9XX(dev)) {
+ /* Wait for vblank for the disable to take effect */
+ intel_wait_for_vblank(dev);
+ }
+
+ /* Next, disable display pipes */
+ temp = I915_READ(pipeconf_reg);
+ if ((temp & PIPEACONF_ENABLE) != 0) {
+ I915_WRITE(pipeconf_reg, temp & ~PIPEACONF_ENABLE);
+ I915_READ(pipeconf_reg);
+ }
+
+ /* Wait for vblank for the disable to take effect. */
+ intel_wait_for_vblank(dev);
+
+ temp = I915_READ(dpll_reg);
+ if ((temp & DPLL_VCO_ENABLE) != 0) {
+ I915_WRITE(dpll_reg, temp & ~DPLL_VCO_ENABLE);
+ I915_READ(dpll_reg);
+ }
+
+ /* Wait for the clocks to turn off. */
+ udelay(150);
+ break;
+ }
+
+
+ if (!dev_priv->sarea_priv)
+ return;
+
+ enabled = crtc->enabled && mode != DPMSModeOff;
+
+ switch (pipe) {
+ case 0:
+ dev_priv->sarea_priv->planeA_w = enabled ? crtc->mode.hdisplay : 0;
+ dev_priv->sarea_priv->planeA_h = enabled ? crtc->mode.vdisplay : 0;
+ break;
+ case 1:
+ dev_priv->sarea_priv->planeB_w = enabled ? crtc->mode.hdisplay : 0;
+ dev_priv->sarea_priv->planeB_h = enabled ? crtc->mode.vdisplay : 0;
+ break;
+ default:
+ DRM_ERROR("Can't update pipe %d in SAREA\n", pipe);
+ break;
+ }
+}
+
+static bool intel_crtc_lock(struct drm_crtc *crtc)
+{
+ /* Sync the engine before mode switch */
+// i830WaitSync(crtc->scrn);
+
+#if 0 // TODO def XF86DRI
+ return I830DRILock(crtc->scrn);
+#else
+ return FALSE;
+#endif
+}
+
+static void intel_crtc_unlock (struct drm_crtc *crtc)
+{
+#if 0 // TODO def XF86DRI
+ I830DRIUnlock (crtc->scrn);
+#endif
+}
+
+static void intel_crtc_prepare (struct drm_crtc *crtc)
+{
+ crtc->funcs->dpms(crtc, DPMSModeOff);
+}
+
+static void intel_crtc_commit (struct drm_crtc *crtc)
+{
+ crtc->funcs->dpms(crtc, DPMSModeOn);
+}
+
+void intel_output_prepare (struct drm_output *output)
+{
+ /* lvds has its own version of prepare see intel_lvds_prepare */
+ output->funcs->dpms(output, DPMSModeOff);
+}
+
+void intel_output_commit (struct drm_output *output)
+{
+ /* lvds has its own version of commit see intel_lvds_commit */
+ output->funcs->dpms(output, DPMSModeOn);
+}
+
+static bool intel_crtc_mode_fixup(struct drm_crtc *crtc,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ return true;
+}
+
+
+/** Returns the core display clock speed for i830 - i945 */
+static int intel_get_core_clock_speed(struct drm_device *dev)
+{
+
+ /* Core clock values taken from the published datasheets.
+ * The 830 may go up to 166 Mhz, which we should check.
+ */
+ if (IS_I945G(dev))
+ return 400000;
+ else if (IS_I915G(dev))
+ return 333000;
+ else if (IS_I945GM(dev) || IS_845G(dev))
+ return 200000;
+ else if (IS_I915GM(dev)) {
+ u16 gcfgc = 0;
+
+ pci_read_config_word(dev->pdev, I915_GCFGC, &gcfgc);
+
+ if (gcfgc & I915_LOW_FREQUENCY_ENABLE)
+ return 133000;
+ else {
+ switch (gcfgc & I915_DISPLAY_CLOCK_MASK) {
+ case I915_DISPLAY_CLOCK_333_MHZ:
+ return 333000;
+ default:
+ case I915_DISPLAY_CLOCK_190_200_MHZ:
+ return 190000;
+ }
+ }
+ } else if (IS_I865G(dev))
+ return 266000;
+ else if (IS_I855(dev)) {
+#if 0
+ PCITAG bridge = pciTag(0, 0, 0); /* This is always the host bridge */
+ u16 hpllcc = pciReadWord(bridge, I855_HPLLCC);
+
+#endif
+ u16 hpllcc = 0;
+ /* Assume that the hardware is in the high speed state. This
+ * should be the default.
+ */
+ switch (hpllcc & I855_CLOCK_CONTROL_MASK) {
+ case I855_CLOCK_133_200:
+ case I855_CLOCK_100_200:
+ return 200000;
+ case I855_CLOCK_166_250:
+ return 250000;
+ case I855_CLOCK_100_133:
+ return 133000;
+ }
+ } else /* 852, 830 */
+ return 133000;
+
+ return 0; /* Silence gcc warning */
+}
+
+
+/**
+ * Return the pipe currently connected to the panel fitter,
+ * or -1 if the panel fitter is not present or not in use
+ */
+static int intel_panel_fitter_pipe (struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 pfit_control;
+
+ /* i830 doesn't have a panel fitter */
+ if (IS_I830(dev))
+ return -1;
+
+ pfit_control = I915_READ(PFIT_CONTROL);
+
+ /* See if the panel fitter is in use */
+ if ((pfit_control & PFIT_ENABLE) == 0)
+ return -1;
+
+ /* 965 can place panel fitter on either pipe */
+ if (IS_I965G(dev))
+ return (pfit_control >> 29) & 0x3;
+
+ /* older chips can only use pipe 1 */
+ return 1;
+}
+
+static void intel_crtc_mode_set(struct drm_crtc *crtc,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode,
+ int x, int y)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = crtc->driver_private;
+ int pipe = intel_crtc->pipe;
+ int fp_reg = (pipe == 0) ? FPA0 : FPB0;
+ int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
+ int dpll_md_reg = (intel_crtc->pipe == 0) ? DPLL_A_MD : DPLL_B_MD;
+ int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR;
+ int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
+ int htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B;
+ int hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B;
+ int hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B;
+ int vtot_reg = (pipe == 0) ? VTOTAL_A : VTOTAL_B;
+ int vblank_reg = (pipe == 0) ? VBLANK_A : VBLANK_B;
+ int vsync_reg = (pipe == 0) ? VSYNC_A : VSYNC_B;
+ int dspsize_reg = (pipe == 0) ? DSPASIZE : DSPBSIZE;
+ int dspstride_reg = (pipe == 0) ? DSPASTRIDE : DSPBSTRIDE;
+ int dsppos_reg = (pipe == 0) ? DSPAPOS : DSPBPOS;
+ int pipesrc_reg = (pipe == 0) ? PIPEASRC : PIPEBSRC;
+ int refclk;
+ intel_clock_t clock;
+ u32 dpll = 0, fp = 0, dspcntr, pipeconf;
+ bool ok, is_sdvo = false, is_dvo = false;
+ bool is_crt = false, is_lvds = false, is_tv = false;
+ struct drm_mode_config *mode_config = &dev->mode_config;
+ struct drm_output *output;
+
+ list_for_each_entry(output, &mode_config->output_list, head) {
+ struct intel_output *intel_output = output->driver_private;
+
+ if (output->crtc != crtc)
+ continue;
+
+ switch (intel_output->type) {
+ case INTEL_OUTPUT_LVDS:
+ is_lvds = TRUE;
+ break;
+ case INTEL_OUTPUT_SDVO:
+ is_sdvo = TRUE;
+ break;
+ case INTEL_OUTPUT_DVO:
+ is_dvo = TRUE;
+ break;
+ case INTEL_OUTPUT_TVOUT:
+ is_tv = TRUE;
+ break;
+ case INTEL_OUTPUT_ANALOG:
+ is_crt = TRUE;
+ break;
+ }
+ }
+
+ if (IS_I9XX(dev)) {
+ refclk = 96000;
+ } else {
+ refclk = 48000;
+ }
+
+ ok = intel_find_best_PLL(crtc, adjusted_mode->clock, refclk, &clock);
+ if (!ok) {
+ DRM_ERROR("Couldn't find PLL settings for mode!\n");
+ return;
+ }
+
+ fp = clock.n << 16 | clock.m1 << 8 | clock.m2;
+
+ dpll = DPLL_VGA_MODE_DIS;
+ if (IS_I9XX(dev)) {
+ if (is_lvds)
+ dpll |= DPLLB_MODE_LVDS;
+ else
+ dpll |= DPLLB_MODE_DAC_SERIAL;
+ if (is_sdvo) {
+ dpll |= DPLL_DVO_HIGH_SPEED;
+ if (IS_I945G(dev) || IS_I945GM(dev)) {
+ int sdvo_pixel_multiply = adjusted_mode->clock / mode->clock;
+ dpll |= (sdvo_pixel_multiply - 1) << SDVO_MULTIPLIER_SHIFT_HIRES;
+ }
+ }
+
+ /* compute bitmask from p1 value */
+ dpll |= (1 << (clock.p1 - 1)) << 16;
+ switch (clock.p2) {
+ case 5:
+ dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
+ break;
+ case 7:
+ dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
+ break;
+ case 10:
+ dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
+ break;
+ case 14:
+ dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
+ break;
+ }
+ if (IS_I965G(dev))
+ dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT);
+ } else {
+ if (is_lvds) {
+ dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
+ } else {
+ if (clock.p1 == 2)
+ dpll |= PLL_P1_DIVIDE_BY_TWO;
+ else
+ dpll |= (clock.p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT;
+ if (clock.p2 == 4)
+ dpll |= PLL_P2_DIVIDE_BY_4;
+ }
+ }
+
+ if (is_tv) {
+ /* XXX: just matching BIOS for now */
+/* dpll |= PLL_REF_INPUT_TVCLKINBC; */
+ dpll |= 3;
+ }
+#if 0
+ else if (is_lvds)
+ dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
+#endif
+ else
+ dpll |= PLL_REF_INPUT_DREFCLK;
+
+ /* setup pipeconf */
+ pipeconf = I915_READ(pipeconf_reg);
+
+ /* Set up the display plane register */
+ dspcntr = DISPPLANE_GAMMA_ENABLE;
+
+ switch (crtc->fb->bits_per_pixel) {
+ case 8:
+ dspcntr |= DISPPLANE_8BPP;
+ break;
+ case 16:
+ if (crtc->fb->depth == 15)
+ dspcntr |= DISPPLANE_15_16BPP;
+ else
+ dspcntr |= DISPPLANE_16BPP;
+ break;
+ case 32:
+ dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
+ break;
+ default:
+ DRM_ERROR("Unknown color depth\n");
+ return;
+ }
+
+
+ if (pipe == 0)
+ dspcntr |= DISPPLANE_SEL_PIPE_A;
+ else
+ dspcntr |= DISPPLANE_SEL_PIPE_B;
+
+ if (pipe == 0 && !IS_I965G(dev)) {
+ /* Enable pixel doubling when the dot clock is > 90% of the (display)
+ * core speed.
+ *
+ * XXX: No double-wide on 915GM pipe B. Is that the only reason for the
+ * pipe == 0 check?
+ */
+ if (mode->clock > intel_get_core_clock_speed(dev) * 9 / 10)
+ pipeconf |= PIPEACONF_DOUBLE_WIDE;
+ else
+ pipeconf &= ~PIPEACONF_DOUBLE_WIDE;
+ }
+
+ dspcntr |= DISPLAY_PLANE_ENABLE;
+ pipeconf |= PIPEACONF_ENABLE;
+ dpll |= DPLL_VCO_ENABLE;
+
+
+ /* Disable the panel fitter if it was on our pipe */
+ if (intel_panel_fitter_pipe(dev) == pipe)
+ I915_WRITE(PFIT_CONTROL, 0);
+
+ DRM_DEBUG("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B');
+ drm_mode_debug_printmodeline(dev, mode);
+
+#if 0
+ if (!xf86ModesEqual(mode, adjusted_mode)) {
+ xf86DrvMsg(pScrn->scrnIndex, X_INFO,
+ "Adjusted mode for pipe %c:\n", pipe == 0 ? 'A' : 'B');
+ xf86PrintModeline(pScrn->scrnIndex, mode);
+ }
+ i830PrintPll("chosen", &clock);
+#endif
+
+ if (dpll & DPLL_VCO_ENABLE) {
+ I915_WRITE(fp_reg, fp);
+ I915_WRITE(dpll_reg, dpll & ~DPLL_VCO_ENABLE);
+ I915_READ(dpll_reg);
+ udelay(150);
+ }
+
+ /* The LVDS pin pair needs to be on before the DPLLs are enabled.
+ * This is an exception to the general rule that mode_set doesn't turn
+ * things on.
+ */
+ if (is_lvds) {
+ u32 lvds = I915_READ(LVDS);
+
+ lvds |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP | LVDS_PIPEB_SELECT;
+ /* Set the B0-B3 data pairs corresponding to whether we're going to
+ * set the DPLLs for dual-channel mode or not.
+ */
+ if (clock.p2 == 7)
+ lvds |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
+ else
+ lvds &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);
+
+ /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
+ * appropriately here, but we need to look more thoroughly into how
+ * panels behave in the two modes.
+ */
+
+ I915_WRITE(LVDS, lvds);
+ I915_READ(LVDS);
+ }
+
+ I915_WRITE(fp_reg, fp);
+ I915_WRITE(dpll_reg, dpll);
+ I915_READ(dpll_reg);
+ /* Wait for the clocks to stabilize. */
+ udelay(150);
+
+ if (IS_I965G(dev)) {
+ int sdvo_pixel_multiply = adjusted_mode->clock / mode->clock;
+ I915_WRITE(dpll_md_reg, (0 << DPLL_MD_UDI_DIVIDER_SHIFT) |
+ ((sdvo_pixel_multiply - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT));
+ } else {
+ /* write it again -- the BIOS does, after all */
+ I915_WRITE(dpll_reg, dpll);
+ }
+ I915_READ(dpll_reg);
+ /* Wait for the clocks to stabilize. */
+ udelay(150);
+
+ I915_WRITE(htot_reg, (adjusted_mode->crtc_hdisplay - 1) |
+ ((adjusted_mode->crtc_htotal - 1) << 16));
+ I915_WRITE(hblank_reg, (adjusted_mode->crtc_hblank_start - 1) |
+ ((adjusted_mode->crtc_hblank_end - 1) << 16));
+ I915_WRITE(hsync_reg, (adjusted_mode->crtc_hsync_start - 1) |
+ ((adjusted_mode->crtc_hsync_end - 1) << 16));
+ I915_WRITE(vtot_reg, (adjusted_mode->crtc_vdisplay - 1) |
+ ((adjusted_mode->crtc_vtotal - 1) << 16));
+ I915_WRITE(vblank_reg, (adjusted_mode->crtc_vblank_start - 1) |
+ ((adjusted_mode->crtc_vblank_end - 1) << 16));
+ I915_WRITE(vsync_reg, (adjusted_mode->crtc_vsync_start - 1) |
+ ((adjusted_mode->crtc_vsync_end - 1) << 16));
+ I915_WRITE(dspstride_reg, crtc->fb->pitch);
+ /* pipesrc and dspsize control the size that is scaled from, which should
+ * always be the user's requested size.
+ */
+ I915_WRITE(dspsize_reg, ((mode->vdisplay - 1) << 16) | (mode->hdisplay - 1));
+ I915_WRITE(dsppos_reg, 0);
+ I915_WRITE(pipesrc_reg, ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
+ I915_WRITE(pipeconf_reg, pipeconf);
+ I915_READ(pipeconf_reg);
+
+ intel_wait_for_vblank(dev);
+
+ I915_WRITE(dspcntr_reg, dspcntr);
+
+ /* Flush the plane changes */
+ intel_pipe_set_base(crtc, x, y);
+
+ intel_set_vblank(dev);
+
+ intel_wait_for_vblank(dev);
+}
+
+/** Loads the palette/gamma unit for the CRTC with the prepared values */
+void intel_crtc_load_lut(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = crtc->driver_private;
+ int palreg = (intel_crtc->pipe == 0) ? PALETTE_A : PALETTE_B;
+ int i;
+
+ /* The clocks have to be on to load the palette. */
+ if (!crtc->enabled)
+ return;
+
+ for (i = 0; i < 256; i++) {
+ I915_WRITE(palreg + 4 * i,
+ (intel_crtc->lut_r[i] << 16) |
+ (intel_crtc->lut_g[i] << 8) |
+ intel_crtc->lut_b[i]);
+ }
+}
+
+/** Sets the color ramps on behalf of RandR */
+static void intel_crtc_gamma_set(struct drm_crtc *crtc, u16 red, u16 green,
+ u16 blue, int regno)
+{
+ struct intel_crtc *intel_crtc = crtc->driver_private;
+
+ intel_crtc->lut_r[regno] = red >> 8;
+ intel_crtc->lut_g[regno] = green >> 8;
+ intel_crtc->lut_b[regno] = blue >> 8;
+}
+
+/* Returns the clock of the currently programmed mode of the given pipe. */
+static int intel_crtc_clock_get(struct drm_device *dev, struct drm_crtc *crtc)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = crtc->driver_private;
+ int pipe = intel_crtc->pipe;
+ u32 dpll = I915_READ((pipe == 0) ? DPLL_A : DPLL_B);
+ u32 fp;
+ intel_clock_t clock;
+
+ if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
+ fp = I915_READ((pipe == 0) ? FPA0 : FPB0);
+ else
+ fp = I915_READ((pipe == 0) ? FPA1 : FPB1);
+
+ clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT;
+ clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT;
+ clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT;
+ if (IS_I9XX(dev)) {
+ clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK) >>
+ DPLL_FPA01_P1_POST_DIV_SHIFT);
+
+ switch (dpll & DPLL_MODE_MASK) {
+ case DPLLB_MODE_DAC_SERIAL:
+ clock.p2 = dpll & DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 ?
+ 5 : 10;
+ break;
+ case DPLLB_MODE_LVDS:
+ clock.p2 = dpll & DPLLB_LVDS_P2_CLOCK_DIV_7 ?
+ 7 : 14;
+ break;
+ default:
+ DRM_DEBUG("Unknown DPLL mode %08x in programmed "
+ "mode\n", (int)(dpll & DPLL_MODE_MASK));
+ return 0;
+ }
+
+ /* XXX: Handle the 100Mhz refclk */
+ i9xx_clock(96000, &clock);
+ } else {
+ bool is_lvds = (pipe == 1) && (I915_READ(LVDS) & LVDS_PORT_EN);
+
+ if (is_lvds) {
+ clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >>
+ DPLL_FPA01_P1_POST_DIV_SHIFT);
+ clock.p2 = 14;
+
+ if ((dpll & PLL_REF_INPUT_MASK) ==
+ PLLB_REF_INPUT_SPREADSPECTRUMIN) {
+ /* XXX: might not be 66MHz */
+ i8xx_clock(66000, &clock);
+ } else
+ i8xx_clock(48000, &clock);
+ } else {
+ if (dpll & PLL_P1_DIVIDE_BY_TWO)
+ clock.p1 = 2;
+ else {
+ clock.p1 = ((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830) >>
+ DPLL_FPA01_P1_POST_DIV_SHIFT) + 2;
+ }
+ if (dpll & PLL_P2_DIVIDE_BY_4)
+ clock.p2 = 4;
+ else
+ clock.p2 = 2;
+
+ i8xx_clock(48000, &clock);
+ }
+ }
+
+ /* XXX: It would be nice to validate the clocks, but we can't reuse
+ * i830PllIsValid() because it relies on the xf86_config output
+ * configuration being accurate, which it isn't necessarily.
+ */
+
+ return clock.dot;
+}
+
+/** Returns the currently programmed mode of the given pipe. */
+struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
+ struct drm_crtc *crtc)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = crtc->driver_private;
+ int pipe = intel_crtc->pipe;
+ struct drm_display_mode *mode;
+ int htot = I915_READ((pipe == 0) ? HTOTAL_A : HTOTAL_B);
+ int hsync = I915_READ((pipe == 0) ? HSYNC_A : HSYNC_B);
+ int vtot = I915_READ((pipe == 0) ? VTOTAL_A : VTOTAL_B);
+ int vsync = I915_READ((pipe == 0) ? VSYNC_A : VSYNC_B);
+
+ mode = kzalloc(sizeof(*mode), GFP_KERNEL);
+ if (!mode)
+ return NULL;
+
+ mode->clock = intel_crtc_clock_get(dev, crtc);
+ mode->hdisplay = (htot & 0xffff) + 1;
+ mode->htotal = ((htot & 0xffff0000) >> 16) + 1;
+ mode->hsync_start = (hsync & 0xffff) + 1;
+ mode->hsync_end = ((hsync & 0xffff0000) >> 16) + 1;
+ mode->vdisplay = (vtot & 0xffff) + 1;
+ mode->vtotal = ((vtot & 0xffff0000) >> 16) + 1;
+ mode->vsync_start = (vsync & 0xffff) + 1;
+ mode->vsync_end = ((vsync & 0xffff0000) >> 16) + 1;
+
+ drm_mode_set_name(mode);
+ drm_mode_set_crtcinfo(mode, 0);
+
+ return mode;
+}
+
+static const struct drm_crtc_funcs intel_crtc_funcs = {
+ .dpms = intel_crtc_dpms,
+ .lock = intel_crtc_lock,
+ .unlock = intel_crtc_unlock,
+ .mode_fixup = intel_crtc_mode_fixup,
+ .mode_set = intel_crtc_mode_set,
+ .gamma_set = intel_crtc_gamma_set,
+ .prepare = intel_crtc_prepare,
+ .commit = intel_crtc_commit,
+};
+
+
+void intel_crtc_init(struct drm_device *dev, int pipe)
+{
+ struct drm_crtc *crtc;
+ struct intel_crtc *intel_crtc;
+ int i;
+
+ crtc = drm_crtc_create(dev, &intel_crtc_funcs);
+ if (crtc == NULL)
+ return;
+
+ intel_crtc = kzalloc(sizeof(struct intel_crtc), GFP_KERNEL);
+ if (intel_crtc == NULL) {
+ kfree(crtc);
+ return;
+ }
+
+ intel_crtc->pipe = pipe;
+ for (i = 0; i < 256; i++) {
+ intel_crtc->lut_r[i] = i;
+ intel_crtc->lut_g[i] = i;
+ intel_crtc->lut_b[i] = i;
+ }
+
+ crtc->driver_private = intel_crtc;
+}
+
+struct drm_crtc *intel_get_crtc_from_pipe(struct drm_device *dev, int pipe)
+{
+ struct drm_crtc *crtc = NULL;
+
+ list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+ struct intel_crtc *intel_crtc = crtc->driver_private;
+ if (intel_crtc->pipe == pipe)
+ break;
+ }
+ return crtc;
+}
+
+int intel_output_clones(struct drm_device *dev, int type_mask)
+{
+ int index_mask = 0;
+ struct drm_output *output;
+ int entry = 0;
+
+ list_for_each_entry(output, &dev->mode_config.output_list, head) {
+ struct intel_output *intel_output = output->driver_private;
+ if (type_mask & (1 << intel_output->type))
+ index_mask |= (1 << entry);
+ entry++;
+ }
+ return index_mask;
+}
+
+
+static void intel_setup_outputs(struct drm_device *dev)
+{
+ struct drm_output *output;
+
+ intel_crt_init(dev);
+
+ /* Set up integrated LVDS */
+ if (IS_MOBILE(dev) && !IS_I830(dev))
+ intel_lvds_init(dev);
+
+ if (IS_I9XX(dev)) {
+ intel_sdvo_init(dev, SDVOB);
+ intel_sdvo_init(dev, SDVOC);
+ }
+
+ list_for_each_entry(output, &dev->mode_config.output_list, head) {
+ struct intel_output *intel_output = output->driver_private;
+ int crtc_mask = 0, clone_mask = 0;
+
+ /* valid crtcs */
+ switch(intel_output->type) {
+ case INTEL_OUTPUT_DVO:
+ case INTEL_OUTPUT_SDVO:
+ crtc_mask = ((1 << 0)|
+ (1 << 1));
+ clone_mask = ((1 << INTEL_OUTPUT_ANALOG) |
+ (1 << INTEL_OUTPUT_DVO) |
+ (1 << INTEL_OUTPUT_SDVO));
+ break;
+ case INTEL_OUTPUT_ANALOG:
+ crtc_mask = ((1 << 0)|
+ (1 << 1));
+ clone_mask = ((1 << INTEL_OUTPUT_ANALOG) |
+ (1 << INTEL_OUTPUT_DVO) |
+ (1 << INTEL_OUTPUT_SDVO));
+ break;
+ case INTEL_OUTPUT_LVDS:
+ crtc_mask = (1 << 1);
+ clone_mask = (1 << INTEL_OUTPUT_LVDS);
+ break;
+ case INTEL_OUTPUT_TVOUT:
+ crtc_mask = ((1 << 0) |
+ (1 << 1));
+ clone_mask = (1 << INTEL_OUTPUT_TVOUT);
+ break;
+ }
+ output->possible_crtcs = crtc_mask;
+ output->possible_clones = intel_output_clones(dev, clone_mask);
+ }
+}
+
+void intel_modeset_init(struct drm_device *dev)
+{
+ int num_pipe;
+ int i;
+
+ drm_mode_config_init(dev);
+
+ dev->mode_config.min_width = 0;
+ dev->mode_config.min_height = 0;
+
+ dev->mode_config.max_width = 4096;
+ dev->mode_config.max_height = 4096;
+
+ /* set memory base */
+ if (IS_I9XX(dev))
+ dev->mode_config.fb_base = pci_resource_start(dev->pdev, 2);
+ else
+ dev->mode_config.fb_base = pci_resource_start(dev->pdev, 0);
+
+ if (IS_MOBILE(dev) || IS_I9XX(dev))
+ num_pipe = 2;
+ else
+ num_pipe = 1;
+ DRM_DEBUG("%d display pipe%s available.\n",
+ num_pipe, num_pipe > 1 ? "s" : "");
+
+ for (i = 0; i < num_pipe; i++) {
+ intel_crtc_init(dev, i);
+ }
+
+ intel_setup_outputs(dev);
+
+ //drm_initial_config(dev, false);
+}
+
+void intel_modeset_cleanup(struct drm_device *dev)
+{
+ drm_mode_config_cleanup(dev);
+}