diff options
Diffstat (limited to 'linux-core/i915_gem.c')
| -rw-r--r-- | linux-core/i915_gem.c | 2502 |
1 files changed, 2502 insertions, 0 deletions
diff --git a/linux-core/i915_gem.c b/linux-core/i915_gem.c new file mode 100644 index 00000000..35dc5bd7 --- /dev/null +++ b/linux-core/i915_gem.c @@ -0,0 +1,2502 @@ +/* + * Copyright © 2008 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS + * IN THE SOFTWARE. + * + * Authors: + * Eric Anholt <eric@anholt.net> + * + */ + +#include "drmP.h" +#include "drm.h" +#include "drm_compat.h" +#include "i915_drm.h" +#include "i915_drv.h" +#include <linux/swap.h> + +static int +i915_gem_object_set_domain(struct drm_gem_object *obj, + uint32_t read_domains, + uint32_t write_domain); +static int +i915_gem_object_set_domain_range(struct drm_gem_object *obj, + uint64_t offset, + uint64_t size, + uint32_t read_domains, + uint32_t write_domain); +int +i915_gem_set_domain(struct drm_gem_object *obj, + struct drm_file *file_priv, + uint32_t read_domains, + uint32_t write_domain); +static int i915_gem_object_get_page_list(struct drm_gem_object *obj); +static void i915_gem_object_free_page_list(struct drm_gem_object *obj); +static int i915_gem_object_wait_rendering(struct drm_gem_object *obj); + +int +i915_gem_init_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_i915_gem_init *args = data; + + mutex_lock(&dev->struct_mutex); + + if (args->gtt_start >= args->gtt_end || + (args->gtt_start & (PAGE_SIZE - 1)) != 0 || + (args->gtt_end & (PAGE_SIZE - 1)) != 0) { + mutex_unlock(&dev->struct_mutex); + return -EINVAL; + } + + drm_mm_init(&dev_priv->mm.gtt_space, args->gtt_start, + args->gtt_end - args->gtt_start); + + dev->gtt_total = (uint32_t) (args->gtt_end - args->gtt_start); + + mutex_unlock(&dev->struct_mutex); + + return 0; +} + + +/** + * Creates a new mm object and returns a handle to it. + */ +int +i915_gem_create_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + struct drm_i915_gem_create *args = data; + struct drm_gem_object *obj; + int handle, ret; + + args->size = roundup(args->size, PAGE_SIZE); + + /* Allocate the new object */ + obj = drm_gem_object_alloc(dev, args->size); + if (obj == NULL) + return -ENOMEM; + + ret = drm_gem_handle_create(file_priv, obj, &handle); + mutex_lock(&dev->struct_mutex); + drm_gem_object_handle_unreference(obj); + mutex_unlock(&dev->struct_mutex); + + if (ret) + return ret; + + args->handle = handle; + + return 0; +} + +/** + * Reads data from the object referenced by handle. + * + * On error, the contents of *data are undefined. + */ +int +i915_gem_pread_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + struct drm_i915_gem_pread *args = data; + struct drm_gem_object *obj; + struct drm_i915_gem_object *obj_priv; + ssize_t read; + loff_t offset; + int ret; + + obj = drm_gem_object_lookup(dev, file_priv, args->handle); + if (obj == NULL) + return -EBADF; + obj_priv = obj->driver_private; + + /* Bounds check source. + * + * XXX: This could use review for overflow issues... + */ + if (args->offset > obj->size || args->size > obj->size || + args->offset + args->size > obj->size) { + drm_gem_object_unreference(obj); + return -EINVAL; + } + + mutex_lock(&dev->struct_mutex); + + ret = i915_gem_object_set_domain_range(obj, args->offset, args->size, + I915_GEM_DOMAIN_CPU, 0); + if (ret != 0) { + drm_gem_object_unreference(obj); + mutex_unlock(&dev->struct_mutex); + } + + offset = args->offset; + + read = vfs_read(obj->filp, (char __user *)(uintptr_t)args->data_ptr, + args->size, &offset); + if (read != args->size) { + drm_gem_object_unreference(obj); + mutex_unlock(&dev->struct_mutex); + if (read < 0) + return read; + else + return -EINVAL; + } + + drm_gem_object_unreference(obj); + mutex_unlock(&dev->struct_mutex); + + return 0; +} + +#include "drm_compat.h" + +static int +i915_gem_gtt_pwrite(struct drm_device *dev, struct drm_gem_object *obj, + struct drm_i915_gem_pwrite *args, + struct drm_file *file_priv) +{ + struct drm_i915_gem_object *obj_priv = obj->driver_private; + ssize_t remain; + loff_t offset; + char __user *user_data; + char *vaddr; + int i, o, l; + int ret = 0; + unsigned long pfn; + unsigned long unwritten; + + user_data = (char __user *) (uintptr_t) args->data_ptr; + remain = args->size; + if (!access_ok(VERIFY_READ, user_data, remain)) + return -EFAULT; + + + mutex_lock(&dev->struct_mutex); + ret = i915_gem_object_pin(obj, 0); + if (ret) { + mutex_unlock(&dev->struct_mutex); + return ret; + } + ret = i915_gem_set_domain(obj, file_priv, + I915_GEM_DOMAIN_GTT, I915_GEM_DOMAIN_GTT); + if (ret) + goto fail; + + obj_priv = obj->driver_private; + offset = obj_priv->gtt_offset + args->offset; + obj_priv->dirty = 1; + + while (remain > 0) { + /* Operation in this page + * + * i = page number + * o = offset within page + * l = bytes to copy + */ + i = offset >> PAGE_SHIFT; + o = offset & (PAGE_SIZE-1); + l = remain; + if ((o + l) > PAGE_SIZE) + l = PAGE_SIZE - o; + + pfn = (dev->agp->base >> PAGE_SHIFT) + i; + +#ifdef DRM_KMAP_ATOMIC_PROT_PFN + /* kmap_atomic can't map IO pages on non-HIGHMEM kernels + */ + vaddr = kmap_atomic_prot_pfn(pfn, KM_USER0, + __pgprot(__PAGE_KERNEL)); +#if WATCH_PWRITE + DRM_INFO("pwrite i %d o %d l %d pfn %ld vaddr %p\n", + i, o, l, pfn, vaddr); +#endif + unwritten = __copy_from_user_inatomic_nocache(vaddr + o, + user_data, l); + kunmap_atomic(vaddr, KM_USER0); + + if (unwritten) +#endif + { + vaddr = ioremap(pfn << PAGE_SHIFT, PAGE_SIZE); +#if WATCH_PWRITE + DRM_INFO("pwrite slow i %d o %d l %d " + "pfn %ld vaddr %p\n", + i, o, l, pfn, vaddr); +#endif + if (vaddr == NULL) { + ret = -EFAULT; + goto fail; + } + unwritten = __copy_from_user(vaddr + o, user_data, l); +#if WATCH_PWRITE + DRM_INFO("unwritten %ld\n", unwritten); +#endif + iounmap(vaddr); + if (unwritten) { + ret = -EFAULT; + goto fail; + } + } + + remain -= l; + user_data += l; + offset += l; + } +#if WATCH_PWRITE && 1 + i915_gem_clflush_object(obj); + i915_gem_dump_object(obj, args->offset + args->size, __func__, ~0); + i915_gem_clflush_object(obj); +#endif + +fail: + i915_gem_object_unpin(obj); + mutex_unlock(&dev->struct_mutex); + + return ret; +} + +int +i915_gem_shmem_pwrite(struct drm_device *dev, struct drm_gem_object *obj, + struct drm_i915_gem_pwrite *args, + struct drm_file *file_priv) +{ + int ret; + loff_t offset; + ssize_t written; + + mutex_lock(&dev->struct_mutex); + + ret = i915_gem_set_domain(obj, file_priv, + I915_GEM_DOMAIN_CPU, I915_GEM_DOMAIN_CPU); + if (ret) { + mutex_unlock(&dev->struct_mutex); + return ret; + } + + offset = args->offset; + + written = vfs_write(obj->filp, + (char __user *)(uintptr_t) args->data_ptr, + args->size, &offset); + if (written != args->size) { + mutex_unlock(&dev->struct_mutex); + if (written < 0) + return written; + else + return -EINVAL; + } + + mutex_unlock(&dev->struct_mutex); + + return 0; +} + +/** + * Writes data to the object referenced by handle. + * + * On error, the contents of the buffer that were to be modified are undefined. + */ +int +i915_gem_pwrite_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + struct drm_i915_gem_pwrite *args = data; + struct drm_gem_object *obj; + struct drm_i915_gem_object *obj_priv; + int ret = 0; + + obj = drm_gem_object_lookup(dev, file_priv, args->handle); + if (obj == NULL) + return -EBADF; + obj_priv = obj->driver_private; + + /* Bounds check destination. + * + * XXX: This could use review for overflow issues... + */ + if (args->offset > obj->size || args->size > obj->size || + args->offset + args->size > obj->size) { + drm_gem_object_unreference(obj); + return -EINVAL; + } + + /* We can only do the GTT pwrite on untiled buffers, as otherwise + * it would end up going through the fenced access, and we'll get + * different detiling behavior between reading and writing. + * pread/pwrite currently are reading and writing from the CPU + * perspective, requiring manual detiling by the client. + */ + if (obj_priv->tiling_mode == I915_TILING_NONE && + dev->gtt_total != 0) + ret = i915_gem_gtt_pwrite(dev, obj, args, file_priv); + else + ret = i915_gem_shmem_pwrite(dev, obj, args, file_priv); + +#if WATCH_PWRITE + if (ret) + DRM_INFO("pwrite failed %d\n", ret); +#endif + + drm_gem_object_unreference(obj); + + return ret; +} + +/** + * Called when user space prepares to use an object + */ +int +i915_gem_set_domain_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + struct drm_i915_gem_set_domain *args = data; + struct drm_gem_object *obj; + int ret; + + if (!(dev->driver->driver_features & DRIVER_GEM)) + return -ENODEV; + + obj = drm_gem_object_lookup(dev, file_priv, args->handle); + if (obj == NULL) + return -EBADF; + + mutex_lock(&dev->struct_mutex); +#if WATCH_BUF + DRM_INFO("set_domain_ioctl %p(%d), %08x %08x\n", + obj, obj->size, args->read_domains, args->write_domain); +#endif + ret = i915_gem_set_domain(obj, file_priv, + args->read_domains, args->write_domain); + drm_gem_object_unreference(obj); + mutex_unlock(&dev->struct_mutex); + return ret; +} + +/** + * Called when user space has done writes to this buffer + */ +int +i915_gem_sw_finish_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + struct drm_i915_gem_sw_finish *args = data; + struct drm_gem_object *obj; + struct drm_i915_gem_object *obj_priv; + int ret = 0; + + if (!(dev->driver->driver_features & DRIVER_GEM)) + return -ENODEV; + + mutex_lock(&dev->struct_mutex); + obj = drm_gem_object_lookup(dev, file_priv, args->handle); + if (obj == NULL) { + mutex_unlock(&dev->struct_mutex); + return -EBADF; + } + +#if WATCH_BUF + DRM_INFO("%s: sw_finish %d (%p %d)\n", + __func__, args->handle, obj, obj->size); +#endif + obj_priv = obj->driver_private; + + /* Pinned buffers may be scanout, so flush the cache */ + if ((obj->write_domain & I915_GEM_DOMAIN_CPU) && obj_priv->pin_count) { + i915_gem_clflush_object(obj); + drm_agp_chipset_flush(dev); + } + drm_gem_object_unreference(obj); + mutex_unlock(&dev->struct_mutex); + return ret; +} + +/** + * Maps the contents of an object, returning the address it is mapped + * into. + * + * While the mapping holds a reference on the contents of the object, it doesn't + * imply a ref on the object itself. + */ +int +i915_gem_mmap_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + struct drm_i915_gem_mmap *args = data; + struct drm_gem_object *obj; + loff_t offset; + unsigned long addr; + + if (!(dev->driver->driver_features & DRIVER_GEM)) + return -ENODEV; + + obj = drm_gem_object_lookup(dev, file_priv, args->handle); + if (obj == NULL) + return -EBADF; + + offset = args->offset; + + down_write(¤t->mm->mmap_sem); + addr = do_mmap(obj->filp, 0, args->size, + PROT_READ | PROT_WRITE, MAP_SHARED, + args->offset); + up_write(¤t->mm->mmap_sem); + mutex_lock(&dev->struct_mutex); + drm_gem_object_unreference(obj); + mutex_unlock(&dev->struct_mutex); + if (IS_ERR((void *)addr)) + return addr; + + args->addr_ptr = (uint64_t) addr; + + return 0; +} + +static void +i915_gem_object_free_page_list(struct drm_gem_object *obj) +{ + struct drm_i915_gem_object *obj_priv = obj->driver_private; + int page_count = obj->size / PAGE_SIZE; + int i; + + if (obj_priv->page_list == NULL) + return; + + + for (i = 0; i < page_count; i++) + if (obj_priv->page_list[i] != NULL) { + if (obj_priv->dirty) + set_page_dirty(obj_priv->page_list[i]); + mark_page_accessed(obj_priv->page_list[i]); + page_cache_release(obj_priv->page_list[i]); + } + obj_priv->dirty = 0; + + drm_free(obj_priv->page_list, + page_count * sizeof(struct page *), + DRM_MEM_DRIVER); + obj_priv->page_list = NULL; +} + +static void +i915_gem_object_move_to_active(struct drm_gem_object *obj) +{ + struct drm_device *dev = obj->dev; + drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_i915_gem_object *obj_priv = obj->driver_private; + + /* Add a reference if we're newly entering the active list. */ + if (!obj_priv->active) { + drm_gem_object_reference(obj); + obj_priv->active = 1; + } + /* Move from whatever list we were on to the tail of execution. */ + list_move_tail(&obj_priv->list, + &dev_priv->mm.active_list); +} + + +static void +i915_gem_object_move_to_inactive(struct drm_gem_object *obj) +{ + struct drm_device *dev = obj->dev; + drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_i915_gem_object *obj_priv = obj->driver_private; + + i915_verify_inactive(dev, __FILE__, __LINE__); + if (obj_priv->pin_count != 0) + list_del_init(&obj_priv->list); + else + list_move_tail(&obj_priv->list, &dev_priv->mm.inactive_list); + + if (obj_priv->active) { + obj_priv->active = 0; + drm_gem_object_unreference(obj); + } + i915_verify_inactive(dev, __FILE__, __LINE__); +} + +/** + * Creates a new sequence number, emitting a write of it to the status page + * plus an interrupt, which will trigger i915_user_interrupt_handler. + * + * Must be called with struct_lock held. + * + * Returned sequence numbers are nonzero on success. + */ +static uint32_t +i915_add_request(struct drm_device *dev, uint32_t flush_domains) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_i915_gem_request *request; + uint32_t seqno; + int was_empty; + RING_LOCALS; + + request = drm_calloc(1, sizeof(*request), DRM_MEM_DRIVER); + if (request == NULL) + return 0; + + /* Grab the seqno we're going to make this request be, and bump the + * next (skipping 0 so it can be the reserved no-seqno value). + */ + seqno = dev_priv->mm.next_gem_seqno; + dev_priv->mm.next_gem_seqno++; + if (dev_priv->mm.next_gem_seqno == 0) + dev_priv->mm.next_gem_seqno++; + + BEGIN_LP_RING(4); + OUT_RING(MI_STORE_DWORD_INDEX); + OUT_RING(I915_GEM_HWS_INDEX << MI_STORE_DWORD_INDEX_SHIFT); + OUT_RING(seqno); + + OUT_RING(MI_USER_INTERRUPT); + ADVANCE_LP_RING(); + + DRM_DEBUG("%d\n", seqno); + + request->seqno = seqno; + request->emitted_jiffies = jiffies; + request->flush_domains = flush_domains; + was_empty = list_empty(&dev_priv->mm.request_list); + list_add_tail(&request->list, &dev_priv->mm.request_list); + + if (was_empty) + schedule_delayed_work(&dev_priv->mm.retire_work, HZ); + return seqno; +} + +/** + * Command execution barrier + * + * Ensures that all commands in the ring are finished + * before signalling the CPU + */ +uint32_t +i915_retire_commands(struct drm_device *dev) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + uint32_t cmd = MI_FLUSH | MI_NO_WRITE_FLUSH; + uint32_t flush_domains = 0; + RING_LOCALS; + + /* The sampler always gets flushed on i965 (sigh) */ + if (IS_I965G(dev)) + flush_domains |= I915_GEM_DOMAIN_SAMPLER; + BEGIN_LP_RING(2); + OUT_RING(cmd); + OUT_RING(0); /* noop */ + ADVANCE_LP_RING(); + return flush_domains; +} + +/** + * Moves buffers associated only with the given active seqno from the active + * to inactive list, potentially freeing them. + */ +static void +i915_gem_retire_request(struct drm_device *dev, + struct drm_i915_gem_request *request) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + + if (request->flush_domains != 0) { + struct drm_i915_gem_object *obj_priv, *next; + + /* First clear any buffers that were only waiting for a flush + * matching the one just retired. + */ + + list_for_each_entry_safe(obj_priv, next, + &dev_priv->mm.flushing_list, list) { + struct drm_gem_object *obj = obj_priv->obj; + + if (obj->write_domain & request->flush_domains) { + obj->write_domain = 0; + i915_gem_object_move_to_inactive(obj); + } + } + + } + + /* Move any buffers on the active list that are no longer referenced + * by the ringbuffer to the flushing/inactive lists as appropriate. + */ + while (!list_empty(&dev_priv->mm.active_list)) { + struct drm_gem_object *obj; + struct drm_i915_gem_object *obj_priv; + + obj_priv = list_first_entry(&dev_priv->mm.active_list, + struct drm_i915_gem_object, + list); + obj = obj_priv->obj; + + /* If the seqno being retired doesn't match the oldest in the + * list, then the oldest in the list must still be newer than + * this seqno. + */ + if (obj_priv->last_rendering_seqno != request->seqno) + return; +#if WATCH_LRU + DRM_INFO("%s: retire %d moves to inactive list %p\n", + __func__, request->seqno, obj); +#endif + + /* If this request flushes the write domain, + * clear the write domain from the object now + */ + if (request->flush_domains & obj->write_domain) + obj->write_domain = 0; + + if (obj->write_domain != 0) { + list_move_tail(&obj_priv->list, + &dev_priv->mm.flushing_list); + } else { + i915_gem_object_move_to_inactive(obj); + } + } +} + +/** + * Returns true if seq1 is later than seq2. + */ +static int +i915_seqno_passed(uint32_t seq1, uint32_t seq2) +{ + return (int32_t)(seq1 - seq2) >= 0; +} + +uint32_t +i915_get_gem_seqno(struct drm_device *dev) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + + return READ_HWSP(dev_priv, I915_GEM_HWS_INDEX); +} + +/** + * This function clears the request list as sequence numbers are passed. + */ +void +i915_gem_retire_requests(struct drm_device *dev) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + uint32_t seqno; + + seqno = i915_get_gem_seqno(dev); + + while (!list_empty(&dev_priv->mm.request_list)) { + struct drm_i915_gem_request *request; + uint32_t retiring_seqno; + + request = list_first_entry(&dev_priv->mm.request_list, + struct drm_i915_gem_request, + list); + retiring_seqno = request->seqno; + + if (i915_seqno_passed(seqno, retiring_seqno) || + dev_priv->mm.wedged) { + i915_gem_retire_request(dev, request); + + list_del(&request->list); + drm_free(request, sizeof(*request), DRM_MEM_DRIVER); + } else + break; + } +} + +void +i915_gem_retire_work_handler(struct work_struct *work) +{ + drm_i915_private_t *dev_priv; + struct drm_device *dev; + + dev_priv = container_of(work, drm_i915_private_t, + mm.retire_work.work); + dev = dev_priv->dev; + + mutex_lock(&dev->struct_mutex); + i915_gem_retire_requests(dev); + if (!list_empty(&dev_priv->mm.request_list)) + schedule_delayed_work(&dev_priv->mm.retire_work, HZ); + mutex_unlock(&dev->struct_mutex); +} + +/** + * Waits for a sequence number to be signaled, and cleans up the + * request and object lists appropriately for that event. + */ +int +i915_wait_request(struct drm_device *dev, uint32_t seqno) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + int ret = 0; + + BUG_ON(seqno == 0); + + if (!i915_seqno_passed(i915_get_gem_seqno(dev), seqno)) { + dev_priv->mm.waiting_gem_seqno = seqno; + i915_user_irq_on(dev_priv); + ret = wait_event_interruptible(dev_priv->irq_queue, + i915_seqno_passed(i915_get_gem_seqno(dev), + seqno) || + dev_priv->mm.wedged); + i915_user_irq_off(dev_priv); + dev_priv->mm.waiting_gem_seqno = 0; + } + if (dev_priv->mm.wedged) + ret = -EIO; + + if (ret && ret != -ERESTARTSYS) + DRM_ERROR("%s returns %d (awaiting %d at %d)\n", + __func__, ret, seqno, i915_get_gem_seqno(dev)); + + /* Directly dispatch request retiring. While we have the work queue + * to handle this, the waiter on a request often wants an associated + * buffer to have made it to the inactive list, and we would need + * a separate wait queue to handle that. + */ + if (ret == 0) + i915_gem_retire_requests(dev); + + return ret; +} + +static void +i915_gem_flush(struct drm_device *dev, + uint32_t invalidate_domains, + uint32_t flush_domains) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + uint32_t cmd; + RING_LOCALS; + +#if WATCH_EXEC + DRM_INFO("%s: invalidate %08x flush %08x\n", __func__, + invalidate_domains, flush_domains); +#endif + + if (flush_domains & I915_GEM_DOMAIN_CPU) + drm_agp_chipset_flush(dev); + + if ((invalidate_domains | flush_domains) & ~(I915_GEM_DOMAIN_CPU | + I915_GEM_DOMAIN_GTT)) { + /* + * read/write caches: + * + * I915_GEM_DOMAIN_RENDER is always invalidated, but is + * only flushed if MI_NO_WRITE_FLUSH is unset. On 965, it is + * also flushed at 2d versus 3d pipeline switches. + * + * read-only caches: + * + * I915_GEM_DOMAIN_SAMPLER is flushed on pre-965 if + * MI_READ_FLUSH is set, and is always flushed on 965. + * + * I915_GEM_DOMAIN_COMMAND may not exist? + * + * I915_GEM_DOMAIN_INSTRUCTION, which exists on 965, is + * invalidated when MI_EXE_FLUSH is set. + * + * I915_GEM_DOMAIN_VERTEX, which exists on 965, is + * invalidated with every MI_FLUSH. + * + * TLBs: + * + * On 965, TLBs associated with I915_GEM_DOMAIN_COMMAND + * and I915_GEM_DOMAIN_CPU in are invalidated at PTE write and + * I915_GEM_DOMAIN_RENDER and I915_GEM_DOMAIN_SAMPLER + * are flushed at any MI_FLUSH. + */ + + cmd = MI_FLUSH | MI_NO_WRITE_FLUSH; + if ((invalidate_domains|flush_domains) & + I915_GEM_DOMAIN_RENDER) + cmd &= ~MI_NO_WRITE_FLUSH; + if (!IS_I965G(dev)) { + /* + * On the 965, the sampler cache always gets flushed + * and this bit is reserved. + */ + if (invalidate_domains & I915_GEM_DOMAIN_SAMPLER) + cmd |= MI_READ_FLUSH; + } + if (invalidate_domains & I915_GEM_DOMAIN_INSTRUCTION) + cmd |= MI_EXE_FLUSH; + +#if WATCH_EXEC + DRM_INFO("%s: queue flush %08x to ring\n", __func__, cmd); +#endif + BEGIN_LP_RING(2); + OUT_RING(cmd); + OUT_RING(0); /* noop */ + ADVANCE_LP_RING(); + } +} + +/** + * Ensures that all rendering to the object has completed and the object is + * safe to unbind from the GTT or access from the CPU. + */ +static int +i915_gem_object_wait_rendering(struct drm_gem_object *obj) +{ + struct drm_device *dev = obj->dev; + struct drm_i915_gem_object *obj_priv = obj->driver_private; + int ret; + uint32_t write_domain; + + /* If there are writes queued to the buffer, flush and + * create a new seqno to wait for. + */ + write_domain = obj->write_domain & ~(I915_GEM_DOMAIN_CPU|I915_GEM_DOMAIN_GTT); + if (write_domain) { +#if WATCH_BUF + DRM_INFO("%s: flushing object %p from write domain %08x\n", + __func__, obj, write_domain); +#endif + i915_gem_flush(dev, 0, write_domain); + + i915_gem_object_move_to_active(obj); + obj_priv->last_rendering_seqno = i915_add_request(dev, + write_domain); + BUG_ON(obj_priv->last_rendering_seqno == 0); +#if WATCH_LRU + DRM_INFO("%s: flush moves to exec list %p\n", __func__, obj); +#endif + } + + /* If there is rendering queued on the buffer being evicted, wait for + * it. + */ + if (obj_priv->active) { +#if WATCH_BUF + DRM_INFO("%s: object %p wait for seqno %08x\n", + __func__, obj, obj_priv->last_rendering_seqno); +#endif + ret = i915_wait_request(dev, obj_priv->last_rendering_seqno); + if (ret != 0) + return ret; + } + + return 0; +} + +/** + * Unbinds an object from the GTT aperture. + */ +static int +i915_gem_object_unbind(struct drm_gem_object *obj) +{ + struct drm_device *dev = obj->dev; + struct drm_i915_gem_object *obj_priv = obj->driver_private; + int ret = 0; + +#if WATCH_BUF + DRM_INFO("%s:%d %p\n", __func__, __LINE__, obj); + DRM_INFO("gtt_space %p\n", obj_priv->gtt_space); +#endif + if (obj_priv->gtt_space == NULL) + return 0; + + if (obj_priv->pin_count != 0) { + DRM_ERROR("Attempting to unbind pinned buffer\n"); + return -EINVAL; + } + + /* Wait for any rendering to complete + */ + ret = i915_gem_object_wait_rendering(obj); + if (ret) { + DRM_ERROR("wait_rendering failed: %d\n", ret); + return ret; + } + + /* Move the object to the CPU domain to ensure that + * any possible CPU writes while it's not in the GTT + * are flushed when we go to remap it. This will + * also ensure that all pending GPU writes are finished + * before we unbind. + */ + ret = i915_gem_object_set_domain(obj, I915_GEM_DOMAIN_CPU, + I915_GEM_DOMAIN_CPU); + if (ret) { + DRM_ERROR("set_domain failed: %d\n", ret); + return ret; + } + + if (obj_priv->agp_mem != NULL) { + drm_unbind_agp(obj_priv->agp_mem); + drm_free_agp(obj_priv->agp_mem, obj->size / PAGE_SIZE); + obj_priv->agp_mem = NULL; + } + + BUG_ON(obj_priv->active); + + i915_gem_object_free_page_list(obj); + + if (obj_priv->gtt_space) { + atomic_dec(&dev->gtt_count); + atomic_sub(obj->size, &dev->gtt_memory); + + drm_mm_put_block(obj_priv->gtt_space); + obj_priv->gtt_space = NULL; + } + + /* Remove ourselves from the LRU list if present. */ + if (!list_empty(&obj_priv->list)) + list_del_init(&obj_priv->list); + + return 0; +} + +static int +i915_gem_evict_something(struct drm_device *dev) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_gem_object *obj; + struct drm_i915_gem_object *obj_priv; + int ret = 0; + + for (;;) { + /* If there's an inactive buffer available now, grab it + * and be done. + */ + if (!list_empty(&dev_priv->mm.inactive_list)) { + obj_priv = list_first_entry(&dev_priv->mm.inactive_list, + struct drm_i915_gem_object, + list); + obj = obj_priv->obj; + BUG_ON(obj_priv->pin_count != 0); +#if WATCH_LRU + DRM_INFO("%s: evicting %p\n", __func__, obj); +#endif + BUG_ON(obj_priv->active); + + /* Wait on the rendering and unbind the buffer. */ + ret = i915_gem_object_unbind(obj); + break; + } + + /* If we didn't get anything, but the ring is still processing + * things, wait for one of those things to finish and hopefully + * leave us a buffer to evict. + */ + if (!list_empty(&dev_priv->mm.request_list)) { + struct drm_i915_gem_request *request; + + request = list_first_entry(&dev_priv->mm.request_list, + struct drm_i915_gem_request, + list); + + ret = i915_wait_request(dev, request->seqno); + if (ret) + break; + + /* if waiting caused an object to become inactive, + * then loop around and wait for it. Otherwise, we + * assume that waiting freed and unbound something, + * so there should now be some space in the GTT + */ + if (!list_empty(&dev_priv->mm.inactive_list)) + continue; + break; + } + + /* If we didn't have anything on the request list but there + * are buffers awaiting a flush, emit one and try again. + * When we wait on it, those buffers waiting for that flush + * will get moved to inactive. + */ + if (!list_empty(&dev_priv->mm.flushing_list)) { + obj_priv = list_first_entry(&dev_priv->mm.flushing_list, + struct drm_i915_gem_object, + list); + obj = obj_priv->obj; + + i915_gem_flush(dev, + obj->write_domain, + obj->write_domain); + i915_add_request(dev, obj->write_domain); + + obj = NULL; + continue; + } + + DRM_ERROR("inactive empty %d request empty %d " + "flushing empty %d\n", + list_empty(&dev_priv->mm.inactive_list), + list_empty(&dev_priv->mm.request_list), + list_empty(&dev_priv->mm.flushing_list)); + /* If we didn't do any of the above, there's nothing to be done + * and we just can't fit it in. + */ + return -ENOMEM; + } + return ret; +} + +static int +i915_gem_object_get_page_list(struct drm_gem_object *obj) +{ + struct drm_i915_gem_object *obj_priv = obj->driver_private; + int page_count, i; + struct address_space *mapping; + struct inode *inode; + struct page *page; + int ret; + + if (obj_priv->page_list) + return 0; + + /* Get the list of pages out of our struct file. They'll be pinned + * at this point until we release them. + */ + page_count = obj->size / PAGE_SIZE; + BUG_ON(obj_priv->page_list != NULL); + obj_priv->page_list = drm_calloc(page_count, sizeof(struct page *), + DRM_MEM_DRIVER); + if (obj_priv->page_list == NULL) { + DRM_ERROR("Faled to allocate page list\n"); + return -ENOMEM; + } + + inode = obj->filp->f_path.dentry->d_inode; + mapping = inode->i_mapping; + for (i = 0; i < page_count; i++) { + page = read_mapping_page(mapping, i, NULL); + if (IS_ERR(page)) { + ret = PTR_ERR(page); + DRM_ERROR("read_mapping_page failed: %d\n", ret); + i915_gem_object_free_page_list(obj); + return ret; + } + obj_priv->page_list[i] = page; + } + return 0; +} + +/** + * Finds free space in the GTT aperture and binds the object there. + */ +static int +i915_gem_object_bind_to_gtt(struct drm_gem_object *obj, unsigned alignment) +{ + struct drm_device *dev = obj->dev; + drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_i915_gem_object *obj_priv = obj->driver_private; + struct drm_mm_node *free_space; + int page_count, ret; + + if (alignment == 0) + alignment = PAGE_SIZE; + if (alignment & (PAGE_SIZE - 1)) { + DRM_ERROR("Invalid object alignment requested %u\n", alignment); + return -EINVAL; + } + + search_free: + free_space = drm_mm_search_free(&dev_priv->mm.gtt_space, + obj->size, alignment, 0); + if (free_space != NULL) { + obj_priv->gtt_space = drm_mm_get_block(free_space, obj->size, + alignment); + if (obj_priv->gtt_space != NULL) { + obj_priv->gtt_space->private = obj; + obj_priv->gtt_offset = obj_priv->gtt_space->start; + } + } + if (obj_priv->gtt_space == NULL) { + /* If the gtt is empty and we're still having trouble + * fitting our object in, we're out of memory. + */ +#if WATCH_LRU + DRM_INFO("%s: GTT full, evicting something\n", __func__); +#endif + if (list_empty(&dev_priv->mm.inactive_list) && + list_empty(&dev_priv->mm.flushing_list) && + list_empty(&dev_priv->mm.active_list)) { + DRM_ERROR("GTT full, but LRU list empty\n"); + return -ENOMEM; + } + + ret = i915_gem_evict_something(dev); + if (ret != 0) { + DRM_ERROR("Failed to evict a buffer %d\n", ret); + return ret; + } + goto search_free; + } + +#if WATCH_BUF + DRM_INFO("Binding object of size %d at 0x%08x\n", + obj->size, obj_priv->gtt_offset); +#endif + ret = i915_gem_object_get_page_list(obj); + if (ret) { + drm_mm_put_block(obj_priv->gtt_space); + obj_priv->gtt_space = NULL; + return ret; + } + + page_count = obj->size / PAGE_SIZE; + /* Create an AGP memory structure pointing at our pages, and bind it + * into the GTT. + */ + obj_priv->agp_mem = drm_agp_bind_pages(dev, + obj_priv->page_list, + page_count, + obj_priv->gtt_offset); + if (obj_priv->agp_mem == NULL) { + i915_gem_object_free_page_list(obj); + drm_mm_put_block(obj_priv->gtt_space); + obj_priv->gtt_space = NULL; + return -ENOMEM; + } + atomic_inc(&dev->gtt_count); + atomic_add(obj->size, &dev->gtt_memory); + + /* Assert that the object is not currently in any GPU domain. As it + * wasn't in the GTT, there shouldn't be any way it could have been in + * a GPU cache + */ + BUG_ON(obj->read_domains & ~(I915_GEM_DOMAIN_CPU|I915_GEM_DOMAIN_GTT)); + BUG_ON(obj->write_domain & ~(I915_GEM_DOMAIN_CPU|I915_GEM_DOMAIN_GTT)); + + return 0; +} + +void +i915_gem_clflush_object(struct drm_gem_object *obj) +{ + struct drm_i915_gem_object *obj_priv = obj->driver_private; + + /* If we don't have a page list set up, then we're not pinned + * to GPU, and we can ignore the cache flush because it'll happen + * again at bind time. + */ + if (obj_priv->page_list == NULL) + return; + + drm_ttm_cache_flush(obj_priv->page_list, obj->size / PAGE_SIZE); +} + +/* + * Set the next domain for the specified object. This + * may not actually perform the necessary flushing/invaliding though, + * as that may want to be batched with other set_domain operations + * + * This is (we hope) the only really tricky part of gem. The goal + * is fairly simple -- track which caches hold bits of the object + * and make sure they remain coherent. A few concrete examples may + * help to explain how it works. For shorthand, we use the notation + * (read_domains, write_domain), e.g. (CPU, CPU) to indicate the + * a pair of read and write domain masks. + * + * Case 1: the batch buffer + * + * 1. Allocated + * 2. Written by CPU + * 3. Mapped to GTT + * 4. Read by GPU + * 5. Unmapped from GTT + * 6. Freed + * + * Let's take these a step at a time + * + * 1. Allocated + * Pages allocated from the kernel may still have + * cache contents, so we set them to (CPU, CPU) always. + * 2. Written by CPU (using pwrite) + * The pwrite function calls set_domain (CPU, CPU) and + * this function does nothing (as nothing changes) + * 3. Mapped by GTT + * This function asserts that the object is not + * currently in any GPU-based read or write domains + * 4. Read by GPU + * i915_gem_execbuffer calls set_domain (COMMAND, 0). + * As write_domain is zero, this function adds in the + * current read domains (CPU+COMMAND, 0). + * flush_domains is set to CPU. + * invalidate_domains is set to COMMAND + * clflush is run to get data out of the CPU caches + * then i915_dev_set_domain calls i915_gem_flush to + * emit an MI_FLUSH and drm_agp_chipset_flush + * 5. Unmapped from GTT + * i915_gem_object_unbind calls set_domain (CPU, CPU) + * flush_domains and invalidate_domains end up both zero + * so no flushing/invalidating happens + * 6. Freed + * yay, done + * + * Case 2: The shared render buffer + * + * 1. Allocated + * 2. Mapped to GTT + * 3. Read/written by GPU + * 4. set_domain to (CPU,CPU) + * 5. Read/written by CPU + * 6. Read/written by GPU + * + * 1. Allocated + * Same as last example, (CPU, CPU) + * 2. Mapped to GTT + * Nothing changes (assertions find that it is not in the GPU) + * 3. Read/written by GPU + * execbuffer calls set_domain (RENDER, RENDER) + * flush_domains gets CPU + * invalidate_domains gets GPU + * clflush (obj) + * MI_FLUSH and drm_agp_chipset_flush + * 4. set_domain (CPU, CPU) + * flush_domains gets GPU + * invalidate_domains gets CPU + * wait_rendering (obj) to make sure all drawing is complete. + * This will include an MI_FLUSH to get the data from GPU + * to memory + * clflush (obj) to invalidate the CPU cache + * Another MI_FLUSH in i915_gem_flush (eliminate this somehow?) + * 5. Read/written by CPU + * cache lines are loaded and dirtied + * 6. Read written by GPU + * Same as last GPU access + * + * Case 3: The constant buffer + * + * 1. Allocated + * 2. Written by CPU + * 3. Read by GPU + * 4. Updated (written) by CPU again + * 5. Read by GPU + * + * 1. Allocated + * (CPU, CPU) + * 2. Written by CPU + * (CPU, CPU) + * 3. Read by GPU + * (CPU+RENDER, 0) + * flush_domains = CPU + * invalidate_domains = RENDER + * clflush (obj) + * MI_FLUSH + * drm_agp_chipset_flush + * 4. Updated (written) by CPU again + * (CPU, CPU) + * flush_domains = 0 (no previous write domain) + * invalidate_domains = 0 (no new read domains) + * 5. Read by GPU + * (CPU+RENDER, 0) + * flush_domains = CPU + * invalidate_domains = RENDER + * clflush (obj) + * MI_FLUSH + * drm_agp_chipset_flush + */ +static int +i915_gem_object_set_domain(struct drm_gem_object *obj, + uint32_t read_domains, + uint32_t write_domain) +{ + struct drm_device *dev = obj->dev; + struct drm_i915_gem_object *obj_priv = obj->driver_private; + uint32_t invalidate_domains = 0; + uint32_t flush_domains = 0; + int ret; + +#if WATCH_BUF + DRM_INFO("%s: object %p read %08x -> %08x write %08x -> %08x\n", + __func__, obj, + obj->read_domains, read_domains, + obj->write_domain, write_domain); +#endif + /* + * If the object isn't moving to a new write domain, + * let the object stay in multiple read domains + */ + if (write_domain == 0) + read_domains |= obj->read_domains; + else + obj_priv->dirty = 1; + + /* + * Flush the current write domain if + * the new read domains don't match. Invalidate + * any read domains which differ from the old + * write domain + */ + if (obj->write_domain && obj->write_domain != read_domains) { + flush_domains |= obj->write_domain; + invalidate_domains |= read_domains & ~obj->write_domain; + } + /* + * Invalidate any read caches which may have + * stale data. That is, any new read domains. + */ + invalidate_domains |= read_domains & ~obj->read_domains; + if ((flush_domains | invalidate_domains) & I915_GEM_DOMAIN_CPU) { +#if WATCH_BUF + DRM_INFO("%s: CPU domain flush %08x invalidate %08x\n", + __func__, flush_domains, invalidate_domains); +#endif + /* + * If we're invaliding the CPU cache and flushing a GPU cache, + * then pause for rendering so that the GPU caches will be + * flushed before the cpu cache is invalidated + */ + if ((invalidate_domains & I915_GEM_DOMAIN_CPU) && + (flush_domains & ~(I915_GEM_DOMAIN_CPU | + I915_GEM_DOMAIN_GTT))) { + ret = i915_gem_object_wait_rendering(obj); + if (ret) + return ret; + } + i915_gem_clflush_object(obj); + } + + if ((write_domain | flush_domains) != 0) + obj->write_domain = write_domain; + + /* If we're invalidating the CPU domain, clear the per-page CPU + * domain list as well. + */ + if (obj_priv->page_cpu_valid != NULL && + (obj->read_domains & I915_GEM_DOMAIN_CPU) && + ((read_domains & I915_GEM_DOMAIN_CPU) == 0)) { + memset(obj_priv->page_cpu_valid, 0, obj->size / PAGE_SIZE); + } + obj->read_domains = read_domains; + + dev->invalidate_domains |= invalidate_domains; + dev->flush_domains |= flush_domains; +#if WATCH_BUF + DRM_INFO("%s: read %08x write %08x invalidate %08x flush %08x\n", + __func__, + obj->read_domains, obj->write_domain, + dev->invalidate_domains, dev->flush_domains); +#endif + return 0; +} + +/** + * Set the read/write domain on a range of the object. + * + * Currently only implemented for CPU reads, otherwise drops to normal + * i915_gem_object_set_domain(). + */ +static int +i915_gem_object_set_domain_range(struct drm_gem_object *obj, + uint64_t offset, + uint64_t size, + uint32_t read_domains, + uint32_t write_domain) +{ + struct drm_i915_gem_object *obj_priv = obj->driver_private; + int ret, i; + + if (obj->read_domains & I915_GEM_DOMAIN_CPU) + return 0; + + if (read_domains != I915_GEM_DOMAIN_CPU || + write_domain != 0) + return i915_gem_object_set_domain(obj, + read_domains, write_domain); + + /* Wait on any GPU rendering to the object to be flushed. */ + if (obj->write_domain & ~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT)) { + ret = i915_gem_object_wait_rendering(obj); + if (ret) + return ret; + } + + if (obj_priv->page_cpu_valid == NULL) { + obj_priv->page_cpu_valid = drm_calloc(1, obj->size / PAGE_SIZE, + DRM_MEM_DRIVER); + } + + /* Flush the cache on any pages that are still invalid from the CPU's + * perspective. + */ + for (i = offset / PAGE_SIZE; i < (offset + size - 1) / PAGE_SIZE; i++) { + if (obj_priv->page_cpu_valid[i]) + continue; + + drm_ttm_cache_flush(obj_priv->page_list + i, 1); + + obj_priv->page_cpu_valid[i] = 1; + } + + return 0; +} + +/** + * Once all of the objects have been set in the proper domain, + * perform the necessary flush and invalidate operations. + * + * Returns the write domains flushed, for use in flush tracking. + */ +static uint32_t +i915_gem_dev_set_domain(struct drm_device *dev) +{ + uint32_t flush_domains = dev->flush_domains; + + /* + * Now that all the buffers are synced to the proper domains, + * flush and invalidate the collected domains + */ + if (dev->invalidate_domains | dev->flush_domains) { +#if WATCH_EXEC + DRM_INFO("%s: invalidate_domains %08x flush_domains %08x\n", + __func__, + dev->invalidate_domains, + dev->flush_domains); +#endif + i915_gem_flush(dev, + dev->invalidate_domains, + dev->flush_domains); + dev->invalidate_domains = 0; + dev->flush_domains = 0; + } + + return flush_domains; +} + +/** + * Pin an object to the GTT and evaluate the relocations landing in it. + */ +static int +i915_gem_object_pin_and_relocate(struct drm_gem_object *obj, + struct drm_file *file_priv, + struct drm_i915_gem_exec_object *entry) +{ + struct drm_device *dev = obj->dev; + struct drm_i915_gem_relocation_entry reloc; + struct drm_i915_gem_relocation_entry __user *relocs; + struct drm_i915_gem_object *obj_priv = obj->driver_private; + int i, ret; + uint32_t last_reloc_offset = -1; + void *reloc_page = NULL; + + /* Choose the GTT offset for our buffer and put it there. */ + ret = i915_gem_object_pin(obj, (uint32_t) entry->alignment); + if (ret) + return ret; + + entry->offset = obj_priv->gtt_offset; + + relocs = (struct drm_i915_gem_relocation_entry __user *) + (uintptr_t) entry->relocs_ptr; + /* Apply the relocations, using the GTT aperture to avoid cache + * flushing requirements. + */ + for (i = 0; i < entry->relocation_count; i++) { + struct drm_gem_object *target_obj; + struct drm_i915_gem_object *target_obj_priv; + uint32_t reloc_val, reloc_offset, *reloc_entry; + int ret; + + ret = copy_from_user(&reloc, relocs + i, sizeof(reloc)); + if (ret != 0) { + i915_gem_object_unpin(obj); + return ret; + } + + target_obj = drm_gem_object_lookup(obj->dev, file_priv, + reloc.target_handle); + if (target_obj == NULL) { + i915_gem_object_unpin(obj); + return -EBADF; + } + target_obj_priv = target_obj->driver_private; + + /* The target buffer should have appeared before us in the + * exec_object list, so it should have a GTT space bound by now. + */ + if (target_obj_priv->gtt_space == NULL) { + DRM_ERROR("No GTT space found for object %d\n", + reloc.target_handle); + drm_gem_object_unreference(target_obj); + i915_gem_object_unpin(obj); + return -EINVAL; + } + + if (reloc.offset > obj->size - 4) { + DRM_ERROR("Relocation beyond object bounds: " + "obj %p target %d offset %d size %d.\n", + obj, reloc.target_handle, + (int) reloc.offset, (int) obj->size); + drm_gem_object_unreference(target_obj); + i915_gem_object_unpin(obj); + return -EINVAL; + } + if (reloc.offset & 3) { + DRM_ERROR("Relocation not 4-byte aligned: " + "obj %p target %d offset %d.\n", + obj, reloc.target_handle, + (int) reloc.offset); + drm_gem_object_unreference(target_obj); + i915_gem_object_unpin(obj); + return -EINVAL; + } + + if (reloc.write_domain && target_obj->pending_write_domain && + reloc.write_domain != target_obj->pending_write_domain) { + DRM_ERROR("Write domain conflict: " + "obj %p target %d offset %d " + "new %08x old %08x\n", + obj, reloc.target_handle, + (int) reloc.offset, + reloc.write_domain, + target_obj->pending_write_domain); + drm_gem_object_unreference(target_obj); + i915_gem_object_unpin(obj); + return -EINVAL; + } + +#if WATCH_RELOC + DRM_INFO("%s: obj %p offset %08x target %d " + "read %08x write %08x gtt %08x " + "presumed %08x delta %08x\n", + __func__, + obj, + (int) reloc.offset, + (int) reloc.target_handle, + (int) reloc.read_domains, + (int) reloc.write_domain, + (int) target_obj_priv->gtt_offset, + (int) reloc.presumed_offset, + reloc.delta); +#endif + + target_obj->pending_read_domains |= reloc.read_domains; + target_obj->pending_write_domain |= reloc.write_domain; + + /* If the relocation already has the right value in it, no + * more work needs to be done. + */ + if (target_obj_priv->gtt_offset == reloc.presumed_offset) { + drm_gem_object_unreference(target_obj); + continue; + } + + /* Now that we're going to actually write some data in, + * make sure that any rendering using this buffer's contents + * is completed. + */ + i915_gem_object_wait_rendering(obj); + + /* As we're writing through the gtt, flush + * any CPU writes before we write the relocations + */ + if (obj->write_domain & I915_GEM_DOMAIN_CPU) { + i915_gem_clflush_object(obj); + drm_agp_chipset_flush(dev); + obj->write_domain = 0; + } + + /* Map the page containing the relocation we're going to + * perform. + */ + reloc_offset = obj_priv->gtt_offset + reloc.offset; + if (reloc_page == NULL || + (last_reloc_offset & ~(PAGE_SIZE - 1)) != + (reloc_offset & ~(PAGE_SIZE - 1))) { + if (reloc_page != NULL) + iounmap(reloc_page); + + reloc_page = ioremap(dev->agp->base + + (reloc_offset & ~(PAGE_SIZE - 1)), + PAGE_SIZE); + last_reloc_offset = reloc_offset; + if (reloc_page == NULL) { + drm_gem_object_unreference(target_obj); + i915_gem_object_unpin(obj); + return -ENOMEM; + } + } + + reloc_entry = (uint32_t *)((char *)reloc_page + + (reloc_offset & (PAGE_SIZE - 1))); + reloc_val = target_obj_priv->gtt_offset + reloc.delta; + +#if WATCH_BUF + DRM_INFO("Applied relocation: %p@0x%08x %08x -> %08x\n", + obj, (unsigned int) reloc.offset, + readl(reloc_entry), reloc_val); +#endif + writel(reloc_val, reloc_entry); + + /* Write the updated presumed offset for this entry back out + * to the user. + */ + reloc.presumed_offset = target_obj_priv->gtt_offset; + ret = copy_to_user(relocs + i, &reloc, sizeof(reloc)); + if (ret != 0) { + drm_gem_object_unreference(target_obj); + i915_gem_object_unpin(obj); + return ret; + } + + drm_gem_object_unreference(target_obj); + } + + if (reloc_page != NULL) + iounmap(reloc_page); + +#if WATCH_BUF + if (0) + i915_gem_dump_object(obj, 128, __func__, ~0); +#endif + return 0; +} + +/** Dispatch a batchbuffer to the ring + */ +static int +i915_dispatch_gem_execbuffer(struct drm_device *dev, + struct drm_i915_gem_execbuffer *exec, + uint64_t exec_offset) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_clip_rect __user *boxes = (struct drm_clip_rect __user *) + (uintptr_t) exec->cliprects_ptr; + int nbox = exec->num_cliprects; + int i = 0, count; + uint32_t exec_start, exec_len; + RING_LOCALS; + + exec_start = (uint32_t) exec_offset + exec->batch_start_offset; + exec_len = (uint32_t) exec->batch_len; + + if ((exec_start | exec_len) & 0x7) { + DRM_ERROR("alignment\n"); + return -EINVAL; + } + + if (!exec_start) + return -EINVAL; + + count = nbox ? nbox : 1; + + for (i = 0; i < count; i++) { + if (i < nbox) { + int ret = i915_emit_box(dev, boxes, i, + exec->DR1, exec->DR4); + if (ret) + return ret; + } + + if (IS_I830(dev) || IS_845G(dev)) { + BEGIN_LP_RING(4); + OUT_RING(MI_BATCH_BUFFER); + OUT_RING(exec_start | MI_BATCH_NON_SECURE); + OUT_RING(exec_start + exec_len - 4); + OUT_RING(0); + ADVANCE_LP_RING(); + } else { + BEGIN_LP_RING(2); + if (IS_I965G(dev)) { + OUT_RING(MI_BATCH_BUFFER_START | + (2 << 6) | + MI_BATCH_NON_SECURE_I965); + OUT_RING(exec_start); + } else { + OUT_RING(MI_BATCH_BUFFER_START | + (2 << 6)); + OUT_RING(exec_start | MI_BATCH_NON_SECURE); + } + ADVANCE_LP_RING(); + } + } + + /* XXX breadcrumb */ + return 0; +} + +/* Throttle our rendering by waiting until the ring has completed our requests + * emitted over 20 msec ago. + * + * This should get us reasonable parallelism between CPU and GPU but also + * relatively low latency when blocking on a particular request to finish. + */ +static int +i915_gem_ring_throttle(struct drm_device *dev, struct drm_file *file_priv) +{ + struct drm_i915_file_private *i915_file_priv = file_priv->driver_priv; + int ret = 0; + uint32_t seqno; + + mutex_lock(&dev->struct_mutex); + seqno = i915_file_priv->mm.last_gem_throttle_seqno; + i915_file_priv->mm.last_gem_throttle_seqno = + i915_file_priv->mm.last_gem_seqno; + if (seqno) + ret = i915_wait_request(dev, seqno); + mutex_unlock(&dev->struct_mutex); + return ret; +} + +int +i915_gem_execbuffer(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_i915_file_private *i915_file_priv = file_priv->driver_priv; + struct drm_i915_gem_execbuffer *args = data; + struct drm_i915_gem_exec_object *exec_list = NULL; + struct drm_gem_object **object_list = NULL; + struct drm_gem_object *batch_obj; + int ret, i, pinned = 0; + uint64_t exec_offset; + uint32_t seqno, flush_domains; + +#if WATCH_EXEC + DRM_INFO("buffers_ptr %d buffer_count %d len %08x\n", + (int) args->buffers_ptr, args->buffer_count, args->batch_len); +#endif + + /* Copy in the exec list from userland */ + exec_list = drm_calloc(sizeof(*exec_list), args->buffer_count, + DRM_MEM_DRIVER); + object_list = drm_calloc(sizeof(*object_list), args->buffer_count, + DRM_MEM_DRIVER); + if (exec_list == NULL || object_list == NULL) { + DRM_ERROR("Failed to allocate exec or object list " + "for %d buffers\n", + args->buffer_count); + ret = -ENOMEM; + goto pre_mutex_err; + } + ret = copy_from_user(exec_list, + (struct drm_i915_relocation_entry __user *) + (uintptr_t) args->buffers_ptr, + sizeof(*exec_list) * args->buffer_count); + if (ret != 0) { + DRM_ERROR("copy %d exec entries failed %d\n", + args->buffer_count, ret); + goto pre_mutex_err; + } + + mutex_lock(&dev->struct_mutex); + + i915_verify_inactive(dev, __FILE__, __LINE__); + + if (dev_priv->mm.wedged) { + DRM_ERROR("Execbuf while wedged\n"); + mutex_unlock(&dev->struct_mutex); + return -EIO; + } + + if (dev_priv->mm.suspended) { + DRM_ERROR("Execbuf while VT-switched.\n"); + mutex_unlock(&dev->struct_mutex); + return -EBUSY; + } + + /* Zero the gloabl flush/invalidate flags. These + * will be modified as each object is bound to the + * gtt + */ + dev->invalidate_domains = 0; + dev->flush_domains = 0; + + /* Look up object handles and perform the relocations */ + for (i = 0; i < args->buffer_count; i++) { + object_list[i] = drm_gem_object_lookup(dev, file_priv, + exec_list[i].handle); + if (object_list[i] == NULL) { + DRM_ERROR("Invalid object handle %d at index %d\n", + exec_list[i].handle, i); + ret = -EBADF; + goto err; + } + + object_list[i]->pending_read_domains = 0; + object_list[i]->pending_write_domain = 0; + ret = i915_gem_object_pin_and_relocate(object_list[i], + file_priv, + &exec_list[i]); + if (ret) { + DRM_ERROR("object bind and relocate failed %d\n", ret); + goto err; + } + pinned = i + 1; + } + + /* Set the pending read domains for the batch buffer to COMMAND */ + batch_obj = object_list[args->buffer_count-1]; + batch_obj->pending_read_domains = I915_GEM_DOMAIN_COMMAND; + batch_obj->pending_write_domain = 0; + + i915_verify_inactive(dev, __FILE__, __LINE__); + + for (i = 0; i < args->buffer_count; i++) { + struct drm_gem_object *obj = object_list[i]; + struct drm_i915_gem_object *obj_priv = obj->driver_private; + + if (obj_priv->gtt_space == NULL) { + /* We evicted the buffer in the process of validating + * our set of buffers in. We could try to recover by + * kicking them everything out and trying again from + * the start. + */ + ret = -ENOMEM; + goto err; + } + + /* make sure all previous memory operations have passed */ + ret = i915_gem_object_set_domain(obj, + obj->pending_read_domains, + obj->pending_write_domain); + if (ret) + goto err; + } + + i915_verify_inactive(dev, __FILE__, __LINE__); + + /* Flush/invalidate caches and chipset buffer */ + flush_domains = i915_gem_dev_set_domain(dev); + + i915_verify_inactive(dev, __FILE__, __LINE__); + +#if WATCH_COHERENCY + for (i = 0; i < args->buffer_count; i++) { + i915_gem_object_check_coherency(object_list[i], + exec_list[i].handle); + } +#endif + + exec_offset = exec_list[args->buffer_count - 1].offset; + +#if WATCH_EXEC + i915_gem_dump_object(object_list[args->buffer_count - 1], + args->batch_len, + __func__, + ~0); +#endif + + /* Exec the batchbuffer */ + ret = i915_dispatch_gem_execbuffer(dev, args, exec_offset); + if (ret) { + DRM_ERROR("dispatch failed %d\n", ret); + goto err; + } + + /* + * Ensure that the commands in the batch buffer are + * finished before the interrupt fires + */ + flush_domains |= i915_retire_commands(dev); + + i915_verify_inactive(dev, __FILE__, __LINE__); + + /* + * Get a seqno representing the execution of the current buffer, + * which we can wait on. We would like to mitigate these interrupts, + * likely by only creating seqnos occasionally (so that we have + * *some* interrupts representing completion of buffers that we can + * wait on when trying to clear up gtt space). + */ + seqno = i915_add_request(dev, flush_domains); + BUG_ON(seqno == 0); + i915_file_priv->mm.last_gem_seqno = seqno; + for (i = 0; i < args->buffer_count; i++) { + struct drm_gem_object *obj = object_list[i]; + struct drm_i915_gem_object *obj_priv = obj->driver_private; + + i915_gem_object_move_to_active(obj); + obj_priv->last_rendering_seqno = seqno; +#if WATCH_LRU + DRM_INFO("%s: move to exec list %p\n", __func__, obj); +#endif + } +#if WATCH_LRU + i915_dump_lru(dev, __func__); +#endif + + i915_verify_inactive(dev, __FILE__, __LINE__); + + /* Copy the new buffer offsets back to the user's exec list. */ + ret = copy_to_user((struct drm_i915_relocation_entry __user *) + (uintptr_t) args->buffers_ptr, + exec_list, + sizeof(*exec_list) * args->buffer_count); + if (ret) + DRM_ERROR("failed to copy %d exec entries " + "back to user (%d)\n", + args->buffer_count, ret); +err: + if (object_list != NULL) { + for (i = 0; i < pinned; i++) + i915_gem_object_unpin(object_list[i]); + + for (i = 0; i < args->buffer_count; i++) + drm_gem_object_unreference(object_list[i]); + } + mutex_unlock(&dev->struct_mutex); + +pre_mutex_err: + drm_free(object_list, sizeof(*object_list) * args->buffer_count, + DRM_MEM_DRIVER); + drm_free(exec_list, sizeof(*exec_list) * args->buffer_count, + DRM_MEM_DRIVER); + + return ret; +} + +int +i915_gem_object_pin(struct drm_gem_object *obj, uint32_t alignment) +{ + struct drm_device *dev = obj->dev; + struct drm_i915_gem_object *obj_priv = obj->driver_private; + int ret; + + i915_verify_inactive(dev, __FILE__, __LINE__); + if (obj_priv->gtt_space == NULL) { + ret = i915_gem_object_bind_to_gtt(obj, alignment); + if (ret != 0) { + DRM_ERROR("Failure to bind: %d", ret); + return ret; + } + } + obj_priv->pin_count++; + + /* If the object is not active and not pending a flush, + * remove it from the inactive list + */ + if (obj_priv->pin_count == 1) { + atomic_inc(&dev->pin_count); + atomic_add(obj->size, &dev->pin_memory); + if (!obj_priv->active && + (obj->write_domain & ~(I915_GEM_DOMAIN_CPU | + I915_GEM_DOMAIN_GTT)) == 0 && + !list_empty(&obj_priv->list)) + list_del_init(&obj_priv->list); + } + i915_verify_inactive(dev, __FILE__, __LINE__); + + return 0; +} + +void +i915_gem_object_unpin(struct drm_gem_object *obj) +{ + struct drm_device *dev = obj->dev; + drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_i915_gem_object *obj_priv = obj->driver_private; + + i915_verify_inactive(dev, __FILE__, __LINE__); + obj_priv->pin_count--; + BUG_ON(obj_priv->pin_count < 0); + BUG_ON(obj_priv->gtt_space == NULL); + + /* If the object is no longer pinned, and is + * neither active nor being flushed, then stick it on + * the inactive list + */ + if (obj_priv->pin_count == 0) { + if (!obj_priv->active && + (obj->write_domain & ~(I915_GEM_DOMAIN_CPU | + I915_GEM_DOMAIN_GTT)) == 0) + list_move_tail(&obj_priv->list, + &dev_priv->mm.inactive_list); + atomic_dec(&dev->pin_count); + atomic_sub(obj->size, &dev->pin_memory); + } + i915_verify_inactive(dev, __FILE__, __LINE__); +} + +int +i915_gem_pin_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + struct drm_i915_gem_pin *args = data; + struct drm_gem_object *obj; + struct drm_i915_gem_object *obj_priv; + int ret; + + mutex_lock(&dev->struct_mutex); + + obj = drm_gem_object_lookup(dev, file_priv, args->handle); + if (obj == NULL) { + DRM_ERROR("Bad handle in i915_gem_pin_ioctl(): %d\n", + args->handle); + mutex_unlock(&dev->struct_mutex); + return -EBADF; + } + obj_priv = obj->driver_private; + + ret = i915_gem_object_pin(obj, args->alignment); + if (ret != 0) { + drm_gem_object_unreference(obj); + mutex_unlock(&dev->struct_mutex); + return ret; + } + + /* XXX - flush the CPU caches for pinned objects + * as the X server doesn't manage domains yet + */ + if (obj->write_domain & I915_GEM_DOMAIN_CPU) { + i915_gem_clflush_object(obj); + drm_agp_chipset_flush(dev); + obj->write_domain = 0; + } + args->offset = obj_priv->gtt_offset; + drm_gem_object_unreference(obj); + mutex_unlock(&dev->struct_mutex); + + return 0; +} + +int +i915_gem_unpin_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + struct drm_i915_gem_pin *args = data; + struct drm_gem_object *obj; + + mutex_lock(&dev->struct_mutex); + + obj = drm_gem_object_lookup(dev, file_priv, args->handle); + if (obj == NULL) { + DRM_ERROR("Bad handle in i915_gem_unpin_ioctl(): %d\n", + args->handle); + mutex_unlock(&dev->struct_mutex); + return -EBADF; + } + + i915_gem_object_unpin(obj); + + drm_gem_object_unreference(obj); + mutex_unlock(&dev->struct_mutex); + return 0; +} + +int +i915_gem_busy_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + struct drm_i915_gem_busy *args = data; + struct drm_gem_object *obj; + struct drm_i915_gem_object *obj_priv; + + mutex_lock(&dev->struct_mutex); + obj = drm_gem_object_lookup(dev, file_priv, args->handle); + if (obj == NULL) { + DRM_ERROR("Bad handle in i915_gem_busy_ioctl(): %d\n", + args->handle); + mutex_unlock(&dev->struct_mutex); + return -EBADF; + } + + obj_priv = obj->driver_private; + args->busy = obj_priv->active; + + drm_gem_object_unreference(obj); + mutex_unlock(&dev->struct_mutex); + return 0; +} + +int +i915_gem_throttle_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + return i915_gem_ring_throttle(dev, file_priv); +} + +int i915_gem_init_object(struct drm_gem_object *obj) +{ + struct drm_i915_gem_object *obj_priv; + + obj_priv = drm_calloc(1, sizeof(*obj_priv), DRM_MEM_DRIVER); + if (obj_priv == NULL) + return -ENOMEM; + + /* + * We've just allocated pages from the kernel, + * so they've just been written by the CPU with + * zeros. They'll need to be clflushed before we + * use them with the GPU. + */ + obj->write_domain = I915_GEM_DOMAIN_CPU; + obj->read_domains = I915_GEM_DOMAIN_CPU; + + obj->driver_private = obj_priv; + obj_priv->obj = obj; + INIT_LIST_HEAD(&obj_priv->list); + return 0; +} + +void i915_gem_free_object(struct drm_gem_object *obj) +{ + struct drm_i915_gem_object *obj_priv = obj->driver_private; + + while (obj_priv->pin_count > 0) + i915_gem_object_unpin(obj); + + i915_gem_object_unbind(obj); + + drm_free(obj_priv->page_cpu_valid, 1, DRM_MEM_DRIVER); + drm_free(obj->driver_private, 1, DRM_MEM_DRIVER); +} + +int +i915_gem_set_domain(struct drm_gem_object *obj, + struct drm_file *file_priv, + uint32_t read_domains, + uint32_t write_domain) +{ + struct drm_device *dev = obj->dev; + int ret; + uint32_t flush_domains; + + BUG_ON(!mutex_is_locked(&dev->struct_mutex)); + + ret = i915_gem_object_set_domain(obj, read_domains, write_domain); + if (ret) + return ret; + flush_domains = i915_gem_dev_set_domain(obj->dev); + + if (flush_domains & ~(I915_GEM_DOMAIN_CPU|I915_GEM_DOMAIN_GTT)) + (void) i915_add_request(dev, flush_domains); + + return 0; +} + +/** Unbinds all objects that are on the given buffer list. */ +static int +i915_gem_evict_from_list(struct drm_device *dev, struct list_head *head) +{ + struct drm_gem_object *obj; + struct drm_i915_gem_object *obj_priv; + int ret; + + while (!list_empty(head)) { + obj_priv = list_first_entry(head, + struct drm_i915_gem_object, + list); + obj = obj_priv->obj; + + if (obj_priv->pin_count != 0) { + DRM_ERROR("Pinned object in unbind list\n"); + mutex_unlock(&dev->struct_mutex); + return -EINVAL; + } + + ret = i915_gem_object_unbind(obj); + if (ret != 0) { + DRM_ERROR("Error unbinding object in LeaveVT: %d\n", + ret); + mutex_unlock(&dev->struct_mutex); + return ret; + } + } + + + return 0; +} + +static int +i915_gem_idle(struct drm_device *dev) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + uint32_t seqno, cur_seqno, last_seqno; + int stuck; + + if (dev_priv->mm.suspended) + return 0; + + /* Hack! Don't let anybody do execbuf while we don't control the chip. + * We need to replace this with a semaphore, or something. + */ + dev_priv->mm.suspended = 1; + + i915_kernel_lost_context(dev); + + /* Flush the GPU along with all non-CPU write domains + */ + i915_gem_flush(dev, ~(I915_GEM_DOMAIN_CPU|I915_GEM_DOMAIN_GTT), + ~(I915_GEM_DOMAIN_CPU|I915_GEM_DOMAIN_GTT)); + seqno = i915_add_request(dev, ~(I915_GEM_DOMAIN_CPU | + I915_GEM_DOMAIN_GTT)); + + if (seqno == 0) { + mutex_unlock(&dev->struct_mutex); + return -ENOMEM; + } + + dev_priv->mm.waiting_gem_seqno = seqno; + last_seqno = 0; + stuck = 0; + for (;;) { + cur_seqno = i915_get_gem_seqno(dev); + if (i915_seqno_passed(cur_seqno, seqno)) + break; + if (last_seqno == cur_seqno) { + if (stuck++ > 100) { + DRM_ERROR("hardware wedged\n"); + dev_priv->mm.wedged = 1; + DRM_WAKEUP(&dev_priv->irq_queue); + break; + } + } + msleep(10); + last_seqno = cur_seqno; + } + dev_priv->mm.waiting_gem_seqno = 0; + + i915_gem_retire_requests(dev); + + /* Active and flushing should now be empty as we've + * waited for a sequence higher than any pending execbuffer + */ + BUG_ON(!list_empty(&dev_priv->mm.active_list)); + BUG_ON(!list_empty(&dev_priv->mm.flushing_list)); + + /* Request should now be empty as we've also waited + * for the last request in the list + */ + BUG_ON(!list_empty(&dev_priv->mm.request_list)); + + /* Move all buffers out of the GTT. */ + i915_gem_evict_from_list(dev, &dev_priv->mm.inactive_list); + + BUG_ON(!list_empty(&dev_priv->mm.active_list)); + BUG_ON(!list_empty(&dev_priv->mm.flushing_list)); + BUG_ON(!list_empty(&dev_priv->mm.inactive_list)); + BUG_ON(!list_empty(&dev_priv->mm.request_list)); + return 0; +} + +static int +i915_gem_init_hws(struct drm_device *dev) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_gem_object *obj; + struct drm_i915_gem_object *obj_priv; + int ret; + + /* If we need a physical address for the status page, it's already + * initialized at driver load time. + */ + if (!I915_NEED_GFX_HWS(dev)) + return 0; + + obj = drm_gem_object_alloc(dev, 4096); + if (obj == NULL) { + DRM_ERROR("Failed to allocate status page\n"); + return -ENOMEM; + } + obj_priv = obj->driver_private; + + ret = i915_gem_object_pin(obj, 4096); + if (ret != 0) { + drm_gem_object_unreference(obj); + return ret; + } + + dev_priv->status_gfx_addr = obj_priv->gtt_offset; + dev_priv->hws_map.offset = dev->agp->base + obj_priv->gtt_offset; + dev_priv->hws_map.size = 4096; + dev_priv->hws_map.type = 0; + dev_priv->hws_map.flags = 0; + dev_priv->hws_map.mtrr = 0; + + drm_core_ioremap(&dev_priv->hws_map, dev); + if (dev_priv->hws_map.handle == NULL) { + DRM_ERROR("Failed to map status page.\n"); + memset(&dev_priv->hws_map, 0, sizeof(dev_priv->hws_map)); + drm_gem_object_unreference(obj); + return -EINVAL; + } + dev_priv->hws_obj = obj; + dev_priv->hw_status_page = dev_priv->hws_map.handle; + memset(dev_priv->hw_status_page, 0, PAGE_SIZE); + I915_WRITE(HWS_PGA, dev_priv->status_gfx_addr); + DRM_DEBUG("hws offset: 0x%08x\n", dev_priv->status_gfx_addr); + + return 0; +} + +static int +i915_gem_init_ringbuffer(struct drm_device *dev) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_gem_object *obj; + struct drm_i915_gem_object *obj_priv; + int ret; + + ret = i915_gem_init_hws(dev); + if (ret != 0) + return ret; + + obj = drm_gem_object_alloc(dev, 128 * 1024); + if (obj == NULL) { + DRM_ERROR("Failed to allocate ringbuffer\n"); + return -ENOMEM; + } + obj_priv = obj->driver_private; + + ret = i915_gem_object_pin(obj, 4096); + if (ret != 0) { + drm_gem_object_unreference(obj); + return ret; + } + + /* Set up the kernel mapping for the ring. */ + dev_priv->ring.Size = obj->size; + dev_priv->ring.tail_mask = obj->size - 1; + + dev_priv->ring.map.offset = dev->agp->base + obj_priv->gtt_offset; + dev_priv->ring.map.size = obj->size; + dev_priv->ring.map.type = 0; + dev_priv->ring.map.flags = 0; + dev_priv->ring.map.mtrr = 0; + + drm_core_ioremap(&dev_priv->ring.map, dev); + if (dev_priv->ring.map.handle == NULL) { + DRM_ERROR("Failed to map ringbuffer.\n"); + memset(&dev_priv->ring, 0, sizeof(dev_priv->ring)); + drm_gem_object_unreference(obj); + return -EINVAL; + } + dev_priv->ring.ring_obj = obj; + dev_priv->ring.virtual_start = dev_priv->ring.map.handle; + + /* Stop the ring if it's running. */ + I915_WRITE(PRB0_CTL, 0); + I915_WRITE(PRB0_HEAD, 0); + I915_WRITE(PRB0_TAIL, 0); + I915_WRITE(PRB0_START, 0); + + /* Initialize the ring. */ + I915_WRITE(PRB0_START, obj_priv->gtt_offset); + I915_WRITE(PRB0_CTL, + ((obj->size - 4096) & RING_NR_PAGES) | + RING_NO_REPORT | + RING_VALID); + + /* Update our cache of the ring state */ + i915_kernel_lost_context(dev); + + return 0; +} + +static void +i915_gem_cleanup_ringbuffer(struct drm_device *dev) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + + if (dev_priv->ring.ring_obj == NULL) + return; + + drm_core_ioremapfree(&dev_priv->ring.map, dev); + + i915_gem_object_unpin(dev_priv->ring.ring_obj); + drm_gem_object_unreference(dev_priv->ring.ring_obj); + dev_priv->ring.ring_obj = NULL; + memset(&dev_priv->ring, 0, sizeof(dev_priv->ring)); + + if (dev_priv->hws_obj != NULL) { + i915_gem_object_unpin(dev_priv->hws_obj); + drm_gem_object_unreference(dev_priv->hws_obj); + dev_priv->hws_obj = NULL; + memset(&dev_priv->hws_map, 0, sizeof(dev_priv->hws_map)); + + /* Write high address into HWS_PGA when disabling. */ + I915_WRITE(HWS_PGA, 0x1ffff000); + } +} + +int +i915_gem_entervt_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + int ret; + + if (dev_priv->mm.wedged) { + DRM_ERROR("Reenabling wedged hardware, good luck\n"); + dev_priv->mm.wedged = 0; + } + + ret = i915_gem_init_ringbuffer(dev); + if (ret != 0) + return ret; + + mutex_lock(&dev->struct_mutex); + BUG_ON(!list_empty(&dev_priv->mm.active_list)); + BUG_ON(!list_empty(&dev_priv->mm.flushing_list)); + BUG_ON(!list_empty(&dev_priv->mm.inactive_list)); + BUG_ON(!list_empty(&dev_priv->mm.request_list)); + dev_priv->mm.suspended = 0; + mutex_unlock(&dev->struct_mutex); + return 0; +} + +int +i915_gem_leavevt_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + int ret; + + mutex_lock(&dev->struct_mutex); + ret = i915_gem_idle(dev); + if (ret == 0) + i915_gem_cleanup_ringbuffer(dev); + mutex_unlock(&dev->struct_mutex); + + return 0; +} + +void +i915_gem_lastclose(struct drm_device *dev) +{ + int ret; + drm_i915_private_t *dev_priv = dev->dev_private; + + mutex_lock(&dev->struct_mutex); + + if (dev_priv->ring.ring_obj != NULL) { + ret = i915_gem_idle(dev); + if (ret) + DRM_ERROR("failed to idle hardware: %d\n", ret); + + i915_gem_cleanup_ringbuffer(dev); + } + + mutex_unlock(&dev->struct_mutex); +} + +void i915_gem_load(struct drm_device *dev) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + + INIT_LIST_HEAD(&dev_priv->mm.active_list); + INIT_LIST_HEAD(&dev_priv->mm.flushing_list); + INIT_LIST_HEAD(&dev_priv->mm.inactive_list); + INIT_LIST_HEAD(&dev_priv->mm.request_list); + INIT_DELAYED_WORK(&dev_priv->mm.retire_work, + i915_gem_retire_work_handler); + dev_priv->mm.next_gem_seqno = 1; + + i915_gem_detect_bit_6_swizzle(dev); +} |