summaryrefslogtreecommitdiff
path: root/linux-core/drm_edid.c
diff options
context:
space:
mode:
Diffstat (limited to 'linux-core/drm_edid.c')
-rw-r--r--linux-core/drm_edid.c485
1 files changed, 485 insertions, 0 deletions
diff --git a/linux-core/drm_edid.c b/linux-core/drm_edid.c
new file mode 100644
index 00000000..41aa8f5e
--- /dev/null
+++ b/linux-core/drm_edid.c
@@ -0,0 +1,485 @@
+/*
+ * Copyright (c) 2007 Intel Corporation
+ * Jesse Barnes <jesse.barnes@intel.com>
+ *
+ * DDC probing routines (drm_ddc_read & drm_do_probe_ddc_edid) originally from
+ * FB layer.
+ * Copyright (C) 2006 Dennis Munsie <dmunsie@cecropia.com>
+ */
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include "drmP.h"
+#include "drm_edid.h"
+
+/* Valid EDID header has these bytes */
+static u8 edid_header[] = { 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00 };
+
+/**
+ * edid_valid - sanity check EDID data
+ * @edid: EDID data
+ *
+ * Sanity check the EDID block by looking at the header, the version number
+ * and the checksum. Return 0 if the EDID doesn't check out, or 1 if it's
+ * valid.
+ */
+static bool edid_valid(struct edid *edid)
+{
+ int i;
+ u8 csum = 0;
+ u8 *raw_edid = (u8 *)edid;
+
+ if (memcmp(edid->header, edid_header, sizeof(edid_header)))
+ goto bad;
+ if (edid->version != 1)
+ goto bad;
+ if (edid->revision <= 0 || edid->revision > 3)
+ goto bad;
+
+ for (i = 0; i < EDID_LENGTH; i++)
+ csum += raw_edid[i];
+ if (csum)
+ goto bad;
+
+ return 1;
+
+bad:
+ return 0;
+}
+
+/**
+ * drm_mode_std - convert standard mode info (width, height, refresh) into mode
+ * @t: standard timing params
+ *
+ * Take the standard timing params (in this case width, aspect, and refresh)
+ * and convert them into a real mode using CVT.
+ *
+ * Punts for now, but should eventually use the FB layer's CVT based mode
+ * generation code.
+ */
+struct drm_display_mode *drm_mode_std(struct drm_device *dev,
+ struct std_timing *t)
+{
+// struct fb_videomode mode;
+
+// fb_find_mode_cvt(&mode, 0, 0);
+ /* JJJ: convert to drm_display_mode */
+ struct drm_display_mode *mode;
+ int hsize = t->hsize * 8 + 248, vsize;
+
+ mode = drm_mode_create(dev);
+ if (!mode)
+ return NULL;
+
+ if (t->aspect_ratio == 0)
+ vsize = (hsize * 10) / 16;
+ else if (t->aspect_ratio == 1)
+ vsize = (hsize * 3) / 4;
+ else if (t->aspect_ratio == 2)
+ vsize = (hsize * 4) / 5;
+ else
+ vsize = (hsize * 9) / 16;
+
+ drm_mode_set_name(mode);
+
+ return mode;
+}
+
+/**
+ * drm_mode_detailed - create a new mode from an EDID detailed timing section
+ * @timing: EDID detailed timing info
+ * @preferred: is this a preferred mode?
+ *
+ * An EDID detailed timing block contains enough info for us to create and
+ * return a new struct drm_display_mode. The @preferred flag will be set
+ * if this is the display's preferred timing, and we'll use it to indicate
+ * to the other layers that this mode is desired.
+ */
+struct drm_display_mode *drm_mode_detailed(struct drm_device *dev,
+ struct detailed_timing *timing)
+{
+ struct drm_display_mode *mode;
+ struct detailed_pixel_timing *pt = &timing->data.pixel_data;
+
+ if (pt->stereo) {
+ printk(KERN_WARNING "stereo mode not supported\n");
+ return NULL;
+ }
+ if (!pt->separate_sync) {
+ printk(KERN_WARNING "integrated sync not supported\n");
+ return NULL;
+ }
+
+ mode = drm_mode_create(dev);
+ if (!mode)
+ return NULL;
+
+ mode->type = DRM_MODE_TYPE_DRIVER;
+ mode->clock = timing->pixel_clock * 10;
+
+ mode->hdisplay = (pt->hactive_hi << 8) | pt->hactive_lo;
+ mode->hsync_start = mode->hdisplay + ((pt->hsync_offset_hi << 8) |
+ pt->hsync_offset_lo);
+ mode->hsync_end = mode->hsync_start +
+ ((pt->hsync_pulse_width_hi << 8) |
+ pt->hsync_pulse_width_lo);
+ mode->htotal = mode->hdisplay + ((pt->hblank_hi << 8) | pt->hblank_lo);
+
+ mode->vdisplay = (pt->vactive_hi << 8) | pt->vactive_lo;
+ mode->vsync_start = mode->vdisplay + ((pt->vsync_offset_hi << 8) |
+ pt->vsync_offset_lo);
+ mode->vsync_end = mode->vsync_start +
+ ((pt->vsync_pulse_width_hi << 8) |
+ pt->vsync_pulse_width_lo);
+ mode->vtotal = mode->vdisplay + ((pt->vblank_hi << 8) | pt->vblank_lo);
+
+ drm_mode_set_name(mode);
+
+ if (pt->interlaced)
+ mode->flags |= V_INTERLACE;
+
+ mode->flags |= pt->hsync_positive ? V_PHSYNC : V_NHSYNC;
+ mode->flags |= pt->vsync_positive ? V_PVSYNC : V_NVSYNC;
+
+ return mode;
+}
+
+/*
+ * Detailed mode info for the EDID "established modes" data to use.
+ */
+static struct drm_display_mode edid_est_modes[] = {
+ { DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 40000, 800, 840,
+ 968, 1056, 0, 600, 601, 605, 628, 0,
+ V_PHSYNC | V_PVSYNC) }, /* 800x600@60Hz */
+ { DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 36000, 800, 824,
+ 896, 1024, 0, 600, 601, 603, 625, 0,
+ V_PHSYNC | V_PVSYNC) }, /* 800x600@56Hz */
+ { DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 31500, 640, 656,
+ 720, 840, 0, 480, 481, 484, 500, 0,
+ V_NHSYNC | V_NVSYNC) }, /* 640x480@75Hz */
+ { DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 31500, 640, 664,
+ 704, 832, 0, 480, 489, 491, 520, 0,
+ V_NHSYNC | V_NVSYNC) }, /* 640x480@72Hz */
+ { DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 30240, 640, 704,
+ 768, 864, 0, 480, 483, 486, 525, 0,
+ V_NHSYNC | V_NVSYNC) }, /* 640x480@67Hz */
+ { DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 25200, 640, 656,
+ 752, 800, 0, 480, 490, 492, 525, 0,
+ V_NHSYNC | V_NVSYNC) }, /* 640x480@60Hz */
+ { DRM_MODE("720x400", DRM_MODE_TYPE_DRIVER, 35500, 720, 738,
+ 846, 900, 0, 400, 421, 423, 449, 0,
+ V_NHSYNC | V_NVSYNC) }, /* 720x400@88Hz */
+ { DRM_MODE("720x400", DRM_MODE_TYPE_DRIVER, 28320, 720, 738,
+ 846, 900, 0, 400, 412, 414, 449, 0,
+ V_NHSYNC | V_PVSYNC) }, /* 720x400@70Hz */
+ { DRM_MODE("1280x1024", DRM_MODE_TYPE_DRIVER, 135000, 1280, 1296,
+ 1440, 1688, 0, 1024, 1025, 1028, 1066, 0,
+ V_PHSYNC | V_PVSYNC) }, /* 1280x1024@75Hz */
+ { DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 78800, 1024, 1040,
+ 1136, 1312, 0, 768, 769, 772, 800, 0,
+ V_PHSYNC | V_PVSYNC) }, /* 1024x768@75Hz */
+ { DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 75000, 1024, 1048,
+ 1184, 1328, 0, 768, 771, 777, 806, 0,
+ V_NHSYNC | V_NVSYNC) }, /* 1024x768@70Hz */
+ { DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 65000, 1024, 1048,
+ 1184, 1344, 0, 768, 771, 777, 806, 0,
+ V_NHSYNC | V_NVSYNC) }, /* 1024x768@60Hz */
+ { DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER,44900, 1024, 1032,
+ 1208, 1264, 0, 768, 768, 776, 817, 0,
+ V_PHSYNC | V_PVSYNC | V_INTERLACE) }, /* 1024x768@43Hz */
+ { DRM_MODE("832x624", DRM_MODE_TYPE_DRIVER, 57284, 832, 864,
+ 928, 1152, 0, 624, 625, 628, 667, 0,
+ V_NHSYNC | V_NVSYNC) }, /* 832x624@75Hz */
+ { DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 49500, 800, 816,
+ 896, 1056, 0, 600, 601, 604, 625, 0,
+ V_PHSYNC | V_PVSYNC) }, /* 800x600@75Hz */
+ { DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 50000, 800, 856,
+ 976, 1040, 0, 600, 637, 643, 666, 0,
+ V_PHSYNC | V_PVSYNC) }, /* 800x600@72Hz */
+ { DRM_MODE("1152x864", DRM_MODE_TYPE_DRIVER, 108000, 1152, 1216,
+ 1344, 1600, 0, 864, 865, 868, 900, 0,
+ V_PHSYNC | V_PVSYNC) }, /* 1152x864@75Hz */
+};
+
+#define EDID_EST_TIMINGS 16
+#define EDID_STD_TIMINGS 8
+#define EDID_DETAILED_TIMINGS 4
+
+/**
+ * add_established_modes - get est. modes from EDID and add them
+ * @edid: EDID block to scan
+ *
+ * Each EDID block contains a bitmap of the supported "established modes" list
+ * (defined above). Tease them out and add them to the global modes list.
+ */
+static int add_established_modes(struct drm_output *output, struct edid *edid)
+{
+ struct drm_device *dev = output->dev;
+ unsigned long est_bits = edid->established_timings.t1 |
+ (edid->established_timings.t2 << 8) |
+ ((edid->established_timings.mfg_rsvd & 0x80) << 9);
+ int i, modes = 0;
+
+ for (i = 0; i <= EDID_EST_TIMINGS; i++)
+ if (est_bits & (1<<i)) {
+ struct drm_display_mode *newmode;
+ newmode = drm_mode_duplicate(dev, &edid_est_modes[i]);
+ drm_mode_probed_add(output, newmode);
+ modes++;
+ }
+
+ return modes;
+}
+
+/**
+ * add_standard_modes - get std. modes from EDID and add them
+ * @edid: EDID block to scan
+ *
+ * Standard modes can be calculated using the CVT standard. Grab them from
+ * @edid, calculate them, and add them to the list.
+ */
+static int add_standard_modes(struct drm_output *output, struct edid *edid)
+{
+ struct drm_device *dev = output->dev;
+ int i, modes = 0;
+
+ for (i = 0; i < EDID_STD_TIMINGS; i++) {
+ struct std_timing *t = &edid->standard_timings[i];
+ struct drm_display_mode *newmode;
+
+ /* If std timings bytes are 1, 1 it's empty */
+ if (t->hsize == 1 && (t->aspect_ratio | t->vfreq) == 1)
+ continue;
+
+ newmode = drm_mode_std(dev, &edid->standard_timings[i]);
+ drm_mode_probed_add(output, newmode);
+ modes++;
+ }
+
+ return modes;
+}
+
+/**
+ * add_detailed_modes - get detailed mode info from EDID data
+ * @edid: EDID block to scan
+ *
+ * Some of the detailed timing sections may contain mode information. Grab
+ * it and add it to the list.
+ */
+static int add_detailed_info(struct drm_output *output, struct edid *edid)
+{
+ struct drm_device *dev = output->dev;
+ int i, j, modes = 0;
+
+ for (i = 0; i < EDID_DETAILED_TIMINGS; i++) {
+ struct detailed_timing *timing = &edid->detailed_timings[i];
+ struct detailed_non_pixel *data = &timing->data.other_data;
+ struct drm_display_mode *newmode;
+
+ /* EDID up to and including 1.2 may put monitor info here */
+ if (edid->version == 1 && edid->revision < 3)
+ continue;
+
+ /* Detailed mode timing */
+ if (timing->pixel_clock) {
+ newmode = drm_mode_detailed(dev, timing);
+ /* First detailed mode is preferred */
+ if (i == 0 && edid->preferred_timing)
+ newmode->type |= DRM_MODE_TYPE_PREFERRED;
+ drm_mode_probed_add(output, newmode);
+
+ modes++;
+ continue;
+ }
+
+ /* Other timing or info */
+ switch (data->type) {
+ case EDID_DETAIL_MONITOR_SERIAL:
+ break;
+ case EDID_DETAIL_MONITOR_STRING:
+ break;
+ case EDID_DETAIL_MONITOR_RANGE:
+ /* Get monitor range data */
+ break;
+ case EDID_DETAIL_MONITOR_NAME:
+ break;
+ case EDID_DETAIL_MONITOR_CPDATA:
+ break;
+ case EDID_DETAIL_STD_MODES:
+ /* Five modes per detailed section */
+ for (j = 0; j < 5; i++) {
+ struct std_timing *std;
+ struct drm_display_mode *newmode;
+
+ std = &data->data.timings[j];
+ newmode = drm_mode_std(dev, std);
+ drm_mode_probed_add(output, newmode);
+ modes++;
+ }
+ break;
+ default:
+ break;
+ }
+ }
+
+ return modes;
+}
+
+#define DDC_ADDR 0x50
+
+static unsigned char *drm_do_probe_ddc_edid(struct i2c_adapter *adapter)
+{
+ unsigned char start = 0x0;
+ unsigned char *buf = kmalloc(EDID_LENGTH, GFP_KERNEL);
+ struct i2c_msg msgs[] = {
+ {
+ .addr = DDC_ADDR,
+ .flags = 0,
+ .len = 1,
+ .buf = &start,
+ }, {
+ .addr = DDC_ADDR,
+ .flags = I2C_M_RD,
+ .len = EDID_LENGTH,
+ .buf = buf,
+ }
+ };
+
+ if (!buf) {
+ dev_warn(&adapter->dev, "unable to allocate memory for EDID "
+ "block.\n");
+ return NULL;
+ }
+
+ if (i2c_transfer(adapter, msgs, 2) == 2)
+ return buf;
+
+ dev_info(&adapter->dev, "unable to read EDID block.\n");
+ kfree(buf);
+ return NULL;
+}
+
+static unsigned char *drm_ddc_read(struct i2c_adapter *adapter)
+{
+ struct i2c_algo_bit_data *algo_data = adapter->algo_data;
+ unsigned char *edid = NULL;
+ int i, j;
+
+ /*
+ * Startup the bus:
+ * Set clock line high (but give it time to come up)
+ * Then set clock & data low
+ */
+ algo_data->setscl(algo_data->data, 1);
+ udelay(550); /* startup delay */
+ algo_data->setscl(algo_data->data, 0);
+ algo_data->setsda(algo_data->data, 0);
+
+ for (i = 0; i < 3; i++) {
+ /* For some old monitors we need the
+ * following process to initialize/stop DDC
+ */
+ algo_data->setsda(algo_data->data, 0);
+ msleep(13);
+
+ algo_data->setscl(algo_data->data, 1);
+ for (j = 0; j < 5; j++) {
+ msleep(10);
+ if (algo_data->getscl(algo_data->data))
+ break;
+ }
+ if (j == 5)
+ continue;
+
+ algo_data->setsda(algo_data->data, 0);
+ msleep(15);
+ algo_data->setscl(algo_data->data, 0);
+ msleep(15);
+ algo_data->setsda(algo_data->data, 1);
+ msleep(15);
+
+ /* Do the real work */
+ edid = drm_do_probe_ddc_edid(adapter);
+ algo_data->setsda(algo_data->data, 0);
+ algo_data->setscl(algo_data->data, 0);
+ msleep(15);
+
+ algo_data->setscl(algo_data->data, 1);
+ for (j = 0; j < 10; j++) {
+ msleep(10);
+ if (algo_data->getscl(algo_data->data))
+ break;
+ }
+
+ algo_data->setsda(algo_data->data, 1);
+ msleep(15);
+ algo_data->setscl(algo_data->data, 0);
+ if (edid)
+ break;
+ }
+ /* Release the DDC lines when done or the Apple Cinema HD display
+ * will switch off
+ */
+ algo_data->setsda(algo_data->data, 0);
+ algo_data->setscl(algo_data->data, 0);
+ algo_data->setscl(algo_data->data, 1);
+
+ return edid;
+}
+
+/**
+ * drm_get_edid - get EDID data, if available
+ * @output: output we're probing
+ * @adapter: i2c adapter to use for DDC
+ *
+ * Poke the given output's i2c channel to grab EDID data if possible.
+ *
+ * Return edid data or NULL if we couldn't find any.
+ */
+struct edid *drm_get_edid(struct drm_output *output,
+ struct i2c_adapter *adapter)
+{
+ struct edid *edid;
+
+ edid = (struct edid *)drm_ddc_read(adapter);
+ if (!edid) {
+ dev_warn(&output->dev->pdev->dev, "%s: no EDID data\n",
+ drm_get_output_name(output));
+ return NULL;
+ }
+ if (!edid_valid(edid)) {
+ dev_warn(&output->dev->pdev->dev, "%s: EDID invalid.\n",
+ drm_get_output_name(output));
+ kfree(edid);
+ return NULL;
+ }
+ return edid;
+}
+EXPORT_SYMBOL(drm_get_edid);
+
+/**
+ * drm_add_edid_modes - add modes from EDID data, if available
+ * @output: output we're probing
+ * @edid: edid data
+ *
+ * Add the specified modes to the output's mode list.
+ *
+ * Return number of modes added or 0 if we couldn't find any.
+ */
+int drm_add_edid_modes(struct drm_output *output, struct edid *edid)
+{
+ int num_modes = 0;
+
+ if (edid == NULL) {
+ return 0;
+ }
+ if (!edid_valid(edid)) {
+ dev_warn(&output->dev->pdev->dev, "%s: EDID invalid.\n",
+ drm_get_output_name(output));
+ return 0;
+ }
+ num_modes += add_established_modes(output, edid);
+ num_modes += add_standard_modes(output, edid);
+ num_modes += add_detailed_info(output, edid);
+ return num_modes;
+}
+EXPORT_SYMBOL(drm_add_edid_modes);
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-09 23:54:21 +0000