summaryrefslogtreecommitdiff
path: root/linux-core/drm_edid.c
diff options
context:
space:
mode:
Diffstat (limited to 'linux-core/drm_edid.c')
-rw-r--r--linux-core/drm_edid.c240
1 files changed, 175 insertions, 65 deletions
diff --git a/linux-core/drm_edid.c b/linux-core/drm_edid.c
index 33018da6..fcd97d67 100644
--- a/linux-core/drm_edid.c
+++ b/linux-core/drm_edid.c
@@ -1,18 +1,15 @@
/*
* Copyright (c) 2007 Intel Corporation
* Jesse Barnes <jesse.barnes@intel.com>
+ *
+ * DDC probing routines (drm_ddc_read & drm_do_probe_ddc_edid) originally from
+ * FB layer.
*/
-
#include <linux/i2c.h>
-#include <linux/fb.h>
+#include <linux/i2c-algo-bit.h>
#include "drmP.h"
-#include "intel_drv.h"
-
-/*
- * DDC/EDID probing rippped off from FB layer
- */
-#include "edid.h"
+#define EDID_LENGTH 128
#define DDC_ADDR 0x50
#ifdef BIG_ENDIAN
@@ -75,7 +72,7 @@ struct detailed_data_monitor_range {
u8 min_hfreq_khz;
u8 max_hfreq_khz;
u8 pixel_clock_mhz; /* need to multiply by 10 */
- u16 sec_gtf_toggle; /* A000=use above, 20=use below */
+ u16 sec_gtf_toggle; /* A000=use above, 20=use below */ /* FIXME: byte order */
u8 hfreq_start_khz; /* need to multiply by 2 */
u8 c; /* need to divide by 2 */
u16 m; /* FIXME: byte order */
@@ -114,14 +111,14 @@ struct detailed_non_pixel {
} __attribute__((packed));
#define EDID_DETAIL_STD_MODES 0xfa
-#define EDID_DETAIL_CPDATA 0xfb
-#define EDID_DETAIL_NAME 0xfc
-#define EDID_DETAIL_RANGE 0xfd
-#define EDID_DETAIL_STRING 0xfe
-#define EDID_DETAIL_SERIAL 0xff
+#define EDID_DETAIL_MONITOR_CPDATA 0xfb
+#define EDID_DETAIL_MONITOR_NAME 0xfc
+#define EDID_DETAIL_MONITOR_RANGE 0xfd
+#define EDID_DETAIL_MONITOR_STRING 0xfe
+#define EDID_DETAIL_MONITOR_SERIAL 0xff
struct detailed_timing {
- u16 pixel_clock; /* need to multiply by 10 KHz */
+ u16 pixel_clock; /* need to multiply by 10 KHz */ /* FIXME: byte order */
union {
struct detailed_pixel_timing pixel_data;
struct detailed_non_pixel other_data;
@@ -184,6 +181,14 @@ struct edid {
static u8 edid_header[] = { 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00 };
+/**
+ * edid_valid - sanity check EDID data
+ * @edid: EDID data
+ *
+ * Sanity check the EDID block by looking at the header, the version number
+ * and the checksum. Return 0 if the EDID doesn't check out, or 1 if it's
+ * valid.
+ */
static bool edid_valid(struct edid *edid)
{
int i;
@@ -215,7 +220,8 @@ bad:
* Take the standard timing params (in this case width, aspect, and refresh)
* and convert them into a real mode using CVT.
*
- * Punts for now.
+ * Punts for now, but should eventually use the FB layer's CVT based mode
+ * generation code.
*/
struct drm_display_mode *drm_mode_std(struct drm_device *dev,
struct std_timing *t)
@@ -245,19 +251,28 @@ struct drm_display_mode *drm_mode_std(struct drm_device *dev,
return mode;
}
+/**
+ * drm_mode_detailed - create a new mode from an EDID detailed timing section
+ * @timing: EDID detailed timing info
+ * @preferred: is this a preferred mode?
+ *
+ * An EDID detailed timing block contains enough info for us to create and
+ * return a new struct drm_display_mode. The @preferred flag will be set
+ * if this is the display's preferred timing, and we'll use it to indicate
+ * to the other layers that this mode is desired.
+ */
struct drm_display_mode *drm_mode_detailed(drm_device_t *dev,
- struct detailed_timing *timing,
- bool preferred)
+ struct detailed_timing *timing)
{
struct drm_display_mode *mode;
struct detailed_pixel_timing *pt = &timing->data.pixel_data;
if (pt->stereo) {
- printk(KERN_ERR "stereo mode not supported\n");
+ printk(KERN_WARNING "stereo mode not supported\n");
return NULL;
}
if (!pt->separate_sync) {
- printk(KERN_ERR "integrated sync not supported\n");
+ printk(KERN_WARNING "integrated sync not supported\n");
return NULL;
}
@@ -266,7 +281,6 @@ struct drm_display_mode *drm_mode_detailed(drm_device_t *dev,
return NULL;
mode->type = DRM_MODE_TYPE_DRIVER;
- mode->type |= preferred ? DRM_MODE_TYPE_PREFERRED : 0;
mode->clock = timing->pixel_clock / 100;
mode->hdisplay = (pt->hactive_hi << 8) | pt->hactive_lo;
@@ -297,7 +311,10 @@ struct drm_display_mode *drm_mode_detailed(drm_device_t *dev,
return mode;
}
-static struct drm_display_mode established_modes[] = {
+/*
+ * Detailed mode info for the EDID "established modes" data to use.
+ */
+static struct drm_display_mode edid_est_modes[] = {
{ DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 40000, 800, 840,
968, 1056, 0, 600, 601, 605, 628, 0,
V_PHSYNC | V_PVSYNC) }, /* 800x600@60Hz */
@@ -372,8 +389,9 @@ static int add_established_modes(struct drm_output *output, struct edid *edid)
for (i = 0; i <= EDID_EST_TIMINGS; i++)
if (est_bits & (1<<i)) {
- drm_mode_probed_add(output,
- drm_mode_duplicate(dev, &established_modes[i]));
+ struct drm_display_mode *newmode;
+ newmode = drm_mode_duplicate(dev, &edid_est_modes[i]);
+ drm_mode_probed_add(output, newmode);
modes++;
}
@@ -381,7 +399,7 @@ static int add_established_modes(struct drm_output *output, struct edid *edid)
}
/**
- * add_established_modes - get std. modes from EDID and add them
+ * add_standard_modes - get std. modes from EDID and add them
* @edid: EDID block to scan
*
* Standard modes can be calculated using the CVT standard. Grab them from
@@ -389,18 +407,19 @@ static int add_established_modes(struct drm_output *output, struct edid *edid)
*/
static int add_standard_modes(struct drm_output *output, struct edid *edid)
{
- int i, modes = 0;
struct drm_device *dev = output->dev;
+ int i, modes = 0;
for (i = 0; i < EDID_STD_TIMINGS; i++) {
struct std_timing *t = &edid->standard_timings[i];
+ struct drm_display_mode *newmode;
/* If std timings bytes are 1, 1 it's empty */
if (t->hsize == 1 && (t->aspect_ratio | t->vfreq) == 1)
continue;
- drm_mode_probed_add(output,
- drm_mode_std(dev, &edid->standard_timings[i]));
+ newmode = drm_mode_std(dev, &edid->standard_timings[i]);
+ drm_mode_probed_add(output, newmode);
modes++;
}
@@ -416,13 +435,13 @@ static int add_standard_modes(struct drm_output *output, struct edid *edid)
*/
static int add_detailed_info(struct drm_output *output, struct edid *edid)
{
- int i, j, modes = 0;
- bool preferred = 0;
struct drm_device *dev = output->dev;
+ int i, j, modes = 0;
for (i = 0; i < EDID_DETAILED_TIMINGS; i++) {
struct detailed_timing *timing = &edid->detailed_timings[i];
struct detailed_non_pixel *data = &timing->data.other_data;
+ struct drm_display_mode *newmode;
/* EDID up to and including 1.2 may put monitor info here */
if (edid->version == 1 && edid->revision < 3)
@@ -430,33 +449,38 @@ static int add_detailed_info(struct drm_output *output, struct edid *edid)
/* Detailed mode timing */
if (timing->pixel_clock) {
+ newmode = drm_mode_detailed(dev, timing);
+ /* First detailed mode is preferred */
if (i == 0 && edid->preferred_timing)
- preferred = 1;
- drm_mode_probed_add(output,
- drm_mode_detailed(dev, timing, preferred));
+ newmode->type |= DRM_MODE_TYPE_PREFERRED;
+ drm_mode_probed_add(output, newmode);
+
modes++;
continue;
}
/* Other timing or info */
switch (data->type) {
- case EDID_DETAIL_SERIAL:
+ case EDID_DETAIL_MONITOR_SERIAL:
break;
- case EDID_DETAIL_STRING:
+ case EDID_DETAIL_MONITOR_STRING:
break;
- case EDID_DETAIL_RANGE:
+ case EDID_DETAIL_MONITOR_RANGE:
+ /* Get monitor range data */
break;
- case EDID_DETAIL_NAME:
+ case EDID_DETAIL_MONITOR_NAME:
break;
- case EDID_DETAIL_CPDATA:
+ case EDID_DETAIL_MONITOR_CPDATA:
break;
case EDID_DETAIL_STD_MODES:
/* Five modes per detailed section */
for (j = 0; j < 5; i++) {
struct std_timing *std;
+ struct drm_display_mode *newmode;
std = &data->data.timings[j];
- drm_mode_probed_add(output, drm_mode_std(dev, std));
+ newmode = drm_mode_std(dev, std);
+ drm_mode_probed_add(output, newmode);
modes++;
}
break;
@@ -468,6 +492,108 @@ static int add_detailed_info(struct drm_output *output, struct edid *edid)
return modes;
}
+#define DDC_ADDR 0x50
+
+static unsigned char *drm_do_probe_ddc_edid(struct i2c_adapter *adapter)
+{
+ unsigned char start = 0x0;
+ unsigned char *buf = kmalloc(EDID_LENGTH, GFP_KERNEL);
+ struct i2c_msg msgs[] = {
+ {
+ .addr = DDC_ADDR,
+ .flags = 0,
+ .len = 1,
+ .buf = &start,
+ }, {
+ .addr = DDC_ADDR,
+ .flags = I2C_M_RD,
+ .len = EDID_LENGTH,
+ .buf = buf,
+ }
+ };
+
+ if (!buf) {
+ dev_warn(&adapter->dev, "unable to allocate memory for EDID "
+ "block.\n");
+ return NULL;
+ }
+
+ if (i2c_transfer(adapter, msgs, 2) == 2)
+ return buf;
+
+ dev_info(&adapter->dev, "unable to read EDID block.\n");
+ kfree(buf);
+ return NULL;
+}
+
+static unsigned char *drm_ddc_read(struct i2c_adapter *adapter)
+{
+ struct i2c_algo_bit_data *algo_data = adapter->algo_data;
+ unsigned char *edid = NULL;
+ int i, j;
+
+ /*
+ * Startup the bus:
+ * Set clock line high (but give it time to come up)
+ * Then set clock & data low
+ */
+ algo_data->setscl(algo_data->data, 1);
+ udelay(550); /* startup delay */
+ algo_data->setscl(algo_data->data, 0);
+ algo_data->setsda(algo_data->data, 0);
+
+ for (i = 0; i < 3; i++) {
+ /* For some old monitors we need the
+ * following process to initialize/stop DDC
+ */
+ algo_data->setsda(algo_data->data, 0);
+ msleep(13);
+
+ algo_data->setscl(algo_data->data, 1);
+ for (j = 0; j < 5; j++) {
+ msleep(10);
+ if (algo_data->getscl(algo_data->data))
+ break;
+ }
+ if (j == 5)
+ continue;
+
+ algo_data->setsda(algo_data->data, 0);
+ msleep(15);
+ algo_data->setscl(algo_data->data, 0);
+ msleep(15);
+ algo_data->setsda(algo_data->data, 1);
+ msleep(15);
+
+ /* Do the real work */
+ edid = drm_do_probe_ddc_edid(adapter);
+ algo_data->setsda(algo_data->data, 0);
+ algo_data->setscl(algo_data->data, 0);
+ msleep(15);
+
+ algo_data->setscl(algo_data->data, 1);
+ for (j = 0; j < 10; j++) {
+ msleep(10);
+ if (algo_data->getscl(algo_data->data))
+ break;
+ }
+
+ algo_data->setsda(algo_data->data, 1);
+ msleep(15);
+ algo_data->setscl(algo_data->data, 0);
+ if (edid)
+ break;
+ }
+ /* Release the DDC lines when done or the Apple Cinema HD display
+ * will switch off
+ */
+ algo_data->setsda(algo_data->data, 0);
+ algo_data->setscl(algo_data->data, 0);
+ algo_data->setscl(algo_data->data, 1);
+
+ return edid;
+}
+
/**
* drm_add_edid_modes - add modes from EDID data, if available
* @output: output we're probing
@@ -481,42 +607,26 @@ static int add_detailed_info(struct drm_output *output, struct edid *edid)
int drm_add_edid_modes(struct drm_output *output, struct i2c_adapter *adapter)
{
struct edid *edid;
- u8 *raw_edid;
- int i, est_modes, std_modes, det_modes;
-
- edid = (struct edid *)fb_ddc_read(adapter);
+ int num_modes = 0;
+ edid = (struct edid *)drm_ddc_read(adapter);
if (!edid) {
- dev_warn(&output->dev->pdev->dev, "no EDID data\n");
+ dev_warn(&output->dev->pdev->dev, "%s: no EDID data\n",
+ output->name);
goto out_err;
}
if (!edid_valid(edid)) {
- dev_warn(&output->dev->pdev->dev, "EDID invalid, ignoring.\n");
+ dev_warn(&output->dev->pdev->dev, "%s: EDID invalid.\n",
+ output->name);
goto out_err;
}
- est_modes = add_established_modes(output, edid);
- std_modes = add_standard_modes(output, edid);
- det_modes = add_detailed_info(output, edid);
- printk(KERN_ERR "est modes: %d, std_modes: %d, det_modes: %d\n",
- est_modes, std_modes, det_modes);
-
- raw_edid = (u8 *)edid;
- printk(KERN_ERR "EDID:\n" KERN_ERR);
- for (i = 0; i < EDID_LENGTH; i++) {
- if (i != 0 && ((i % 16) == 0))
- printk("\n" KERN_ERR);
- printk("%02x", raw_edid[i] & 0xff);
- }
- printk("\n");
-
- printk(KERN_ERR "EDID info:\n");
- printk(KERN_ERR " mfg_id: 0x%04x\n", edid->mfg_id);
- printk(KERN_ERR " digital? %s\n", edid->digital ? "Yes" : "No");
- printk(KERN_ERR " extensions: %d\n", edid->extensions);
+ num_modes += add_established_modes(output, edid);
+ num_modes += add_standard_modes(output, edid);
+ num_modes += add_detailed_info(output, edid);
- return est_modes + std_modes + det_modes;
+ return num_modes;
out_err:
kfree(edid);