summaryrefslogtreecommitdiff
path: root/linux-core/atombios.h
diff options
context:
space:
mode:
Diffstat (limited to 'linux-core/atombios.h')
-rw-r--r--linux-core/atombios.h5025
1 files changed, 0 insertions, 5025 deletions
diff --git a/linux-core/atombios.h b/linux-core/atombios.h
deleted file mode 100644
index 9932b096..00000000
--- a/linux-core/atombios.h
+++ /dev/null
@@ -1,5025 +0,0 @@
-/*
- * Copyright 2006-2007 Advanced Micro Devices, Inc.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
- * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
- * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-
-/****************************************************************************/
-/*Portion I: Definitions shared between VBIOS and Driver */
-/****************************************************************************/
-
-
-#ifndef _ATOMBIOS_H
-#define _ATOMBIOS_H
-
-#define ATOM_VERSION_MAJOR 0x00020000
-#define ATOM_VERSION_MINOR 0x00000002
-
-#define ATOM_HEADER_VERSION (ATOM_VERSION_MAJOR | ATOM_VERSION_MINOR)
-
-/* Endianness should be specified before inclusion,
- * default to little endian
- */
-#ifndef ATOM_BIG_ENDIAN
-#error Endian not specified
-#endif
-
-#ifdef _H2INC
- #ifndef ULONG
- typedef unsigned long ULONG;
- #endif
-
- #ifndef UCHAR
- typedef unsigned char UCHAR;
- #endif
-
- #ifndef USHORT
- typedef unsigned short USHORT;
- #endif
-#endif
-
-#define ATOM_DAC_A 0
-#define ATOM_DAC_B 1
-#define ATOM_EXT_DAC 2
-
-#define ATOM_CRTC1 0
-#define ATOM_CRTC2 1
-
-#define ATOM_DIGA 0
-#define ATOM_DIGB 1
-
-#define ATOM_PPLL1 0
-#define ATOM_PPLL2 1
-
-#define ATOM_SCALER1 0
-#define ATOM_SCALER2 1
-
-#define ATOM_SCALER_DISABLE 0
-#define ATOM_SCALER_CENTER 1
-#define ATOM_SCALER_EXPANSION 2
-#define ATOM_SCALER_MULTI_EX 3
-
-#define ATOM_DISABLE 0
-#define ATOM_ENABLE 1
-#define ATOM_LCD_BLOFF (ATOM_DISABLE+2)
-#define ATOM_LCD_BLON (ATOM_ENABLE+2)
-#define ATOM_LCD_BL_BRIGHTNESS_CONTROL (ATOM_ENABLE+3)
-#define ATOM_LCD_SELFTEST_START (ATOM_DISABLE+5)
-#define ATOM_LCD_SELFTEST_STOP (ATOM_ENABLE+5)
-#define ATOM_ENCODER_INIT (ATOM_DISABLE+7)
-
-#define ATOM_BLANKING 1
-#define ATOM_BLANKING_OFF 0
-
-#define ATOM_CURSOR1 0
-#define ATOM_CURSOR2 1
-
-#define ATOM_ICON1 0
-#define ATOM_ICON2 1
-
-#define ATOM_CRT1 0
-#define ATOM_CRT2 1
-
-#define ATOM_TV_NTSC 1
-#define ATOM_TV_NTSCJ 2
-#define ATOM_TV_PAL 3
-#define ATOM_TV_PALM 4
-#define ATOM_TV_PALCN 5
-#define ATOM_TV_PALN 6
-#define ATOM_TV_PAL60 7
-#define ATOM_TV_SECAM 8
-#define ATOM_TV_CV 16
-
-#define ATOM_DAC1_PS2 1
-#define ATOM_DAC1_CV 2
-#define ATOM_DAC1_NTSC 3
-#define ATOM_DAC1_PAL 4
-
-#define ATOM_DAC2_PS2 ATOM_DAC1_PS2
-#define ATOM_DAC2_CV ATOM_DAC1_CV
-#define ATOM_DAC2_NTSC ATOM_DAC1_NTSC
-#define ATOM_DAC2_PAL ATOM_DAC1_PAL
-
-#define ATOM_PM_ON 0
-#define ATOM_PM_STANDBY 1
-#define ATOM_PM_SUSPEND 2
-#define ATOM_PM_OFF 3
-
-/* Bit0:{=0:single, =1:dual},
- Bit1 {=0:666RGB, =1:888RGB},
- Bit2:3:{Grey level}
- Bit4:{=0:LDI format for RGB888, =1 FPDI format for RGB888}*/
-
-#define ATOM_PANEL_MISC_DUAL 0x00000001
-#define ATOM_PANEL_MISC_888RGB 0x00000002
-#define ATOM_PANEL_MISC_GREY_LEVEL 0x0000000C
-#define ATOM_PANEL_MISC_FPDI 0x00000010
-#define ATOM_PANEL_MISC_GREY_LEVEL_SHIFT 2
-#define ATOM_PANEL_MISC_SPATIAL 0x00000020
-#define ATOM_PANEL_MISC_TEMPORAL 0x00000040
-#define ATOM_PANEL_MISC_API_ENABLED 0x00000080
-
-
-#define MEMTYPE_DDR1 "DDR1"
-#define MEMTYPE_DDR2 "DDR2"
-#define MEMTYPE_DDR3 "DDR3"
-#define MEMTYPE_DDR4 "DDR4"
-
-#define ASIC_BUS_TYPE_PCI "PCI"
-#define ASIC_BUS_TYPE_AGP "AGP"
-#define ASIC_BUS_TYPE_PCIE "PCI_EXPRESS"
-
-/* Maximum size of that FireGL flag string */
-
-#define ATOM_FIREGL_FLAG_STRING "FGL" //Flag used to enable FireGL Support
-#define ATOM_MAX_SIZE_OF_FIREGL_FLAG_STRING 3 //sizeof( ATOM_FIREGL_FLAG_STRING )
-
-#define ATOM_FAKE_DESKTOP_STRING "DSK" //Flag used to enable mobile ASIC on Desktop
-#define ATOM_MAX_SIZE_OF_FAKE_DESKTOP_STRING ATOM_MAX_SIZE_OF_FIREGL_FLAG_STRING
-
-#define ATOM_M54T_FLAG_STRING "M54T" //Flag used to enable M54T Support
-#define ATOM_MAX_SIZE_OF_M54T_FLAG_STRING 4 //sizeof( ATOM_M54T_FLAG_STRING )
-
-#define HW_ASSISTED_I2C_STATUS_FAILURE 2
-#define HW_ASSISTED_I2C_STATUS_SUCCESS 1
-
-#pragma pack(1) /* BIOS data must use byte aligment */
-
-/* Define offset to location of ROM header. */
-
-#define OFFSET_TO_POINTER_TO_ATOM_ROM_HEADER 0x00000048L
-#define OFFSET_TO_ATOM_ROM_IMAGE_SIZE 0x00000002L
-
-#define OFFSET_TO_ATOMBIOS_ASIC_BUS_MEM_TYPE 0x94
-#define MAXSIZE_OF_ATOMBIOS_ASIC_BUS_MEM_TYPE 20 /* including the terminator 0x0! */
-#define OFFSET_TO_GET_ATOMBIOS_STRINGS_NUMBER 0x002f
-#define OFFSET_TO_GET_ATOMBIOS_STRINGS_START 0x006e
-
-/* Common header for all ROM Data tables.
- Every table pointed _ATOM_MASTER_DATA_TABLE has this common header.
- And the pointer actually points to this header. */
-
-typedef struct _ATOM_COMMON_TABLE_HEADER
-{
- USHORT usStructureSize;
- UCHAR ucTableFormatRevision; /*Change it when the Parser is not backward compatible */
- UCHAR ucTableContentRevision; /*Change it only when the table needs to change but the firmware */
- /*Image can't be updated, while Driver needs to carry the new table! */
-}ATOM_COMMON_TABLE_HEADER;
-
-typedef struct _ATOM_ROM_HEADER
-{
- ATOM_COMMON_TABLE_HEADER sHeader;
- UCHAR uaFirmWareSignature[4]; /*Signature to distinguish between Atombios and non-atombios,
- atombios should init it as "ATOM", don't change the position */
- USHORT usBiosRuntimeSegmentAddress;
- USHORT usProtectedModeInfoOffset;
- USHORT usConfigFilenameOffset;
- USHORT usCRC_BlockOffset;
- USHORT usBIOS_BootupMessageOffset;
- USHORT usInt10Offset;
- USHORT usPciBusDevInitCode;
- USHORT usIoBaseAddress;
- USHORT usSubsystemVendorID;
- USHORT usSubsystemID;
- USHORT usPCI_InfoOffset;
- USHORT usMasterCommandTableOffset; /*Offset for SW to get all command table offsets, Don't change the position */
- USHORT usMasterDataTableOffset; /*Offset for SW to get all data table offsets, Don't change the position */
- UCHAR ucExtendedFunctionCode;
- UCHAR ucReserved;
-}ATOM_ROM_HEADER;
-
-/*==============================Command Table Portion==================================== */
-
-#ifdef UEFI_BUILD
- #define UTEMP USHORT
- #define USHORT void*
-#endif
-
-typedef struct _ATOM_MASTER_LIST_OF_COMMAND_TABLES{
- USHORT ASIC_Init; //Function Table, used by various SW components,latest version 1.1
- USHORT GetDisplaySurfaceSize; //Atomic Table, Used by Bios when enabling HW ICON
- USHORT ASIC_RegistersInit; //Atomic Table, indirectly used by various SW components,called from ASIC_Init
- USHORT VRAM_BlockVenderDetection; //Atomic Table, used only by Bios
- USHORT DIGxEncoderControl; //Only used by Bios
- USHORT MemoryControllerInit; //Atomic Table, indirectly used by various SW components,called from ASIC_Init
- USHORT EnableCRTCMemReq; //Function Table,directly used by various SW components,latest version 2.1
- USHORT MemoryParamAdjust; //Atomic Table, indirectly used by various SW components,called from SetMemoryClock if needed
- USHORT DVOEncoderControl; //Function Table,directly used by various SW components,latest version 1.2
- USHORT GPIOPinControl; //Atomic Table, only used by Bios
- USHORT SetEngineClock; //Function Table,directly used by various SW components,latest version 1.1
- USHORT SetMemoryClock; //Function Table,directly used by various SW components,latest version 1.1
- USHORT SetPixelClock; //Function Table,directly used by various SW components,latest version 1.2
- USHORT DynamicClockGating; //Atomic Table, indirectly used by various SW components,called from ASIC_Init
- USHORT ResetMemoryDLL; //Atomic Table, indirectly used by various SW components,called from SetMemoryClock
- USHORT ResetMemoryDevice; //Atomic Table, indirectly used by various SW components,called from SetMemoryClock
- USHORT MemoryPLLInit;
- USHORT AdjustDisplayPll; //only used by Bios
- USHORT AdjustMemoryController; //Atomic Table, indirectly used by various SW components,called from SetMemoryClock
- USHORT EnableASIC_StaticPwrMgt; //Atomic Table, only used by Bios
- USHORT ASIC_StaticPwrMgtStatusChange; //Obsolete , only used by Bios
- USHORT DAC_LoadDetection; //Atomic Table, directly used by various SW components,latest version 1.2
- USHORT LVTMAEncoderControl; //Atomic Table,directly used by various SW components,latest version 1.3
- USHORT LCD1OutputControl; //Atomic Table, directly used by various SW components,latest version 1.1
- USHORT DAC1EncoderControl; //Atomic Table, directly used by various SW components,latest version 1.1
- USHORT DAC2EncoderControl; //Atomic Table, directly used by various SW components,latest version 1.1
- USHORT DVOOutputControl; //Atomic Table, directly used by various SW components,latest version 1.1
- USHORT CV1OutputControl; //Atomic Table, directly used by various SW components,latest version 1.1
- USHORT GetConditionalGoldenSetting; //only used by Bios
- USHORT TVEncoderControl; //Function Table,directly used by various SW components,latest version 1.1
- USHORT TMDSAEncoderControl; //Atomic Table, directly used by various SW components,latest version 1.3
- USHORT LVDSEncoderControl; //Atomic Table, directly used by various SW components,latest version 1.3
- USHORT TV1OutputControl; //Atomic Table, directly used by various SW components,latest version 1.1
- USHORT EnableScaler; //Atomic Table, used only by Bios
- USHORT BlankCRTC; //Atomic Table, directly used by various SW components,latest version 1.1
- USHORT EnableCRTC; //Atomic Table, directly used by various SW components,latest version 1.1
- USHORT GetPixelClock; //Atomic Table, directly used by various SW components,latest version 1.1
- USHORT EnableVGA_Render; //Function Table,directly used by various SW components,latest version 1.1
- USHORT EnableVGA_Access; //Obsolete , only used by Bios
- USHORT SetCRTC_Timing; //Atomic Table, directly used by various SW components,latest version 1.1
- USHORT SetCRTC_OverScan; //Atomic Table, used by various SW components,latest version 1.1
- USHORT SetCRTC_Replication; //Atomic Table, used only by Bios
- USHORT SelectCRTC_Source; //Atomic Table, directly used by various SW components,latest version 1.1
- USHORT EnableGraphSurfaces; //Atomic Table, used only by Bios
- USHORT UpdateCRTC_DoubleBufferRegisters;
- USHORT LUT_AutoFill; //Atomic Table, only used by Bios
- USHORT EnableHW_IconCursor; //Atomic Table, only used by Bios
- USHORT GetMemoryClock; //Atomic Table, directly used by various SW components,latest version 1.1
- USHORT GetEngineClock; //Atomic Table, directly used by various SW components,latest version 1.1
- USHORT SetCRTC_UsingDTDTiming; //Atomic Table, directly used by various SW components,latest version 1.1
- USHORT ExternalEncoderControl; //Atomic Table, directly used by various SW components,latest version 2.1
- USHORT LVTMAOutputControl; //Atomic Table, directly used by various SW components,latest version 1.1
- USHORT VRAM_BlockDetectionByStrap; //Atomic Table, used only by Bios
- USHORT MemoryCleanUp; //Atomic Table, only used by Bios
- USHORT ProcessI2cChannelTransaction; //Function Table,only used by Bios
- USHORT WriteOneByteToHWAssistedI2C; //Function Table,indirectly used by various SW components
- USHORT ReadHWAssistedI2CStatus; //Atomic Table, indirectly used by various SW components
- USHORT SpeedFanControl; //Function Table,indirectly used by various SW components,called from ASIC_Init
- USHORT PowerConnectorDetection; //Atomic Table, directly used by various SW components,latest version 1.1
- USHORT MC_Synchronization; //Atomic Table, indirectly used by various SW components,called from SetMemoryClock
- USHORT ComputeMemoryEnginePLL; //Atomic Table, indirectly used by various SW components,called from SetMemory/EngineClock
- USHORT MemoryRefreshConversion; //Atomic Table, indirectly used by various SW components,called from SetMemory or SetEngineClock
- USHORT VRAM_GetCurrentInfoBlock; //Atomic Table, used only by Bios
- USHORT DynamicMemorySettings; //Atomic Table, indirectly used by various SW components,called from SetMemoryClock
- USHORT MemoryTraining; //Atomic Table, used only by Bios
- USHORT EnableSpreadSpectrumOnPPLL; //Atomic Table, directly used by various SW components,latest version 1.2
- USHORT TMDSAOutputControl; //Atomic Table, directly used by various SW components,latest version 1.1
- USHORT SetVoltage; //Function Table,directly and/or indirectly used by various SW components,latest version 1.1
- USHORT DAC1OutputControl; //Atomic Table, directly used by various SW components,latest version 1.1
- USHORT DAC2OutputControl; //Atomic Table, directly used by various SW components,latest version 1.1
- USHORT SetupHWAssistedI2CStatus; //Function Table,only used by Bios, obsolete soon.Switch to use "ReadEDIDFromHWAssistedI2C"
- USHORT ClockSource; //Atomic Table, indirectly used by various SW components,called from ASIC_Init
- USHORT MemoryDeviceInit; //Atomic Table, indirectly used by various SW components,called from SetMemoryClock
- USHORT EnableYUV; //Atomic Table, indirectly used by various SW components,called from EnableVGARender
- USHORT DIG1EncoderControl; //Atomic Table,directly used by various SW components,latest version 1.1
- USHORT DIG2EncoderControl; //Atomic Table,directly used by various SW components,latest version 1.1
- USHORT DIG1TransmitterControl; //Atomic Table,directly used by various SW components,latest version 1.1
- USHORT DIG2TransmitterControl; //Atomic Table,directly used by various SW components,latest version 1.1
- USHORT ProcessAuxChannelTransaction; //Function Table,only used by Bios
- USHORT DPEncoderService; //Function Table,only used by Bios
-}ATOM_MASTER_LIST_OF_COMMAND_TABLES;
-
-// For backward compatible
-#define ReadEDIDFromHWAssistedI2C ProcessI2cChannelTransaction
-#define UNIPHYTransmitterControl DIG1TransmitterControl
-#define LVTMATransmitterControl DIG2TransmitterControl
-#define SetCRTC_DPM_State GetConditionalGoldenSetting
-#define SetUniphyInstance ASIC_StaticPwrMgtStatusChange
-
-typedef struct _ATOM_MASTER_COMMAND_TABLE
-{
- ATOM_COMMON_TABLE_HEADER sHeader;
- ATOM_MASTER_LIST_OF_COMMAND_TABLES ListOfCommandTables;
-}ATOM_MASTER_COMMAND_TABLE;
-
-/****************************************************************************/
-// Structures used in every command table
-/****************************************************************************/
-typedef struct _ATOM_TABLE_ATTRIBUTE
-{
-#if ATOM_BIG_ENDIAN
- USHORT UpdatedByUtility:1; //[15]=Table updated by utility flag
- USHORT PS_SizeInBytes:7; //[14:8]=Size of parameter space in Bytes (multiple of a dword),
- USHORT WS_SizeInBytes:8; //[7:0]=Size of workspace in Bytes (in multiple of a dword),
-#else
- USHORT WS_SizeInBytes:8; //[7:0]=Size of workspace in Bytes (in multiple of a dword),
- USHORT PS_SizeInBytes:7; //[14:8]=Size of parameter space in Bytes (multiple of a dword),
- USHORT UpdatedByUtility:1; //[15]=Table updated by utility flag
-#endif
-}ATOM_TABLE_ATTRIBUTE;
-
-typedef union _ATOM_TABLE_ATTRIBUTE_ACCESS
-{
- ATOM_TABLE_ATTRIBUTE sbfAccess;
- USHORT susAccess;
-}ATOM_TABLE_ATTRIBUTE_ACCESS;
-
-/****************************************************************************/
-// Common header for all command tables.
-// Every table pointed by _ATOM_MASTER_COMMAND_TABLE has this common header.
-// And the pointer actually points to this header.
-/****************************************************************************/
-typedef struct _ATOM_COMMON_ROM_COMMAND_TABLE_HEADER
-{
- ATOM_COMMON_TABLE_HEADER CommonHeader;
- ATOM_TABLE_ATTRIBUTE TableAttribute;
-}ATOM_COMMON_ROM_COMMAND_TABLE_HEADER;
-
-/****************************************************************************/
-// Structures used by ComputeMemoryEnginePLLTable
-/****************************************************************************/
-#define COMPUTE_MEMORY_PLL_PARAM 1
-#define COMPUTE_ENGINE_PLL_PARAM 2
-
-typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS
-{
- ULONG ulClock; //When returen, it's the re-calculated clock based on given Fb_div Post_Div and ref_div
- UCHAR ucAction; //0:reserved //1:Memory //2:Engine
- UCHAR ucReserved; //may expand to return larger Fbdiv later
- UCHAR ucFbDiv; //return value
- UCHAR ucPostDiv; //return value
-}COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS;
-
-typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V2
-{
- ULONG ulClock; //When return, [23:0] return real clock
- UCHAR ucAction; //0:reserved;COMPUTE_MEMORY_PLL_PARAM:Memory;COMPUTE_ENGINE_PLL_PARAM:Engine. it return ref_div to be written to register
- USHORT usFbDiv; //return Feedback value to be written to register
- UCHAR ucPostDiv; //return post div to be written to register
-}COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V2;
-#define COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_PS_ALLOCATION COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS
-
-
-#define SET_CLOCK_FREQ_MASK 0x00FFFFFF //Clock change tables only take bit [23:0] as the requested clock value
-#define USE_NON_BUS_CLOCK_MASK 0x01000000 //Applicable to both memory and engine clock change, when set, it uses another clock as the temporary clock (engine uses memory and vice versa)
-#define USE_MEMORY_SELF_REFRESH_MASK 0x02000000 //Only applicable to memory clock change, when set, using memory self refresh during clock transition
-#define SKIP_INTERNAL_MEMORY_PARAMETER_CHANGE 0x04000000 //Only applicable to memory clock change, when set, the table will skip predefined internal memory parameter change
-#define FIRST_TIME_CHANGE_CLOCK 0x08000000 //Applicable to both memory and engine clock change,when set, it means this is 1st time to change clock after ASIC bootup
-#define SKIP_SW_PROGRAM_PLL 0x10000000 //Applicable to both memory and engine clock change, when set, it means the table will not program SPLL/MPLL
-#define USE_SS_ENABLED_PIXEL_CLOCK USE_NON_BUS_CLOCK_MASK
-
-#define b3USE_NON_BUS_CLOCK_MASK 0x01 //Applicable to both memory and engine clock change, when set, it uses another clock as the temporary clock (engine uses memory and vice versa)
-#define b3USE_MEMORY_SELF_REFRESH 0x02 //Only applicable to memory clock change, when set, using memory self refresh during clock transition
-#define b3SKIP_INTERNAL_MEMORY_PARAMETER_CHANGE 0x04 //Only applicable to memory clock change, when set, the table will skip predefined internal memory parameter change
-#define b3FIRST_TIME_CHANGE_CLOCK 0x08 //Applicable to both memory and engine clock change,when set, it means this is 1st time to change clock after ASIC bootup
-#define b3SKIP_SW_PROGRAM_PLL 0x10 //Applicable to both memory and engine clock change, when set, it means the table will not program SPLL/MPLL
-
-typedef struct _ATOM_COMPUTE_CLOCK_FREQ
-{
-#if ATOM_BIG_ENDIAN
- ULONG ulComputeClockFlag:8; // =1: COMPUTE_MEMORY_PLL_PARAM, =2: COMPUTE_ENGINE_PLL_PARAM
- ULONG ulClockFreq:24; // in unit of 10kHz
-#else
- ULONG ulClockFreq:24; // in unit of 10kHz
- ULONG ulComputeClockFlag:8; // =1: COMPUTE_MEMORY_PLL_PARAM, =2: COMPUTE_ENGINE_PLL_PARAM
-#endif
-}ATOM_COMPUTE_CLOCK_FREQ;
-
-typedef struct _ATOM_S_MPLL_FB_DIVIDER
-{
- USHORT usFbDivFrac;
- USHORT usFbDiv;
-}ATOM_S_MPLL_FB_DIVIDER;
-
-typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V3
-{
- union
- {
- ATOM_COMPUTE_CLOCK_FREQ ulClock; //Input Parameter
- ATOM_S_MPLL_FB_DIVIDER ulFbDiv; //Output Parameter
- };
- UCHAR ucRefDiv; //Output Parameter
- UCHAR ucPostDiv; //Output Parameter
- UCHAR ucCntlFlag; //Output Parameter
- UCHAR ucReserved;
-}COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V3;
-
-// ucCntlFlag
-#define ATOM_PLL_CNTL_FLAG_PLL_POST_DIV_EN 1
-#define ATOM_PLL_CNTL_FLAG_MPLL_VCO_MODE 2
-#define ATOM_PLL_CNTL_FLAG_FRACTION_DISABLE 4
-
-typedef struct _DYNAMICE_MEMORY_SETTINGS_PARAMETER
-{
- ATOM_COMPUTE_CLOCK_FREQ ulClock;
- ULONG ulReserved[2];
-}DYNAMICE_MEMORY_SETTINGS_PARAMETER;
-
-typedef struct _DYNAMICE_ENGINE_SETTINGS_PARAMETER
-{
- ATOM_COMPUTE_CLOCK_FREQ ulClock;
- ULONG ulMemoryClock;
- ULONG ulReserved;
-}DYNAMICE_ENGINE_SETTINGS_PARAMETER;
-
-/****************************************************************************/
-// Structures used by SetEngineClockTable
-/****************************************************************************/
-typedef struct _SET_ENGINE_CLOCK_PARAMETERS
-{
- ULONG ulTargetEngineClock; //In 10Khz unit
-}SET_ENGINE_CLOCK_PARAMETERS;
-
-typedef struct _SET_ENGINE_CLOCK_PS_ALLOCATION
-{
- ULONG ulTargetEngineClock; //In 10Khz unit
- COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_PS_ALLOCATION sReserved;
-}SET_ENGINE_CLOCK_PS_ALLOCATION;
-
-/****************************************************************************/
-// Structures used by SetMemoryClockTable
-/****************************************************************************/
-typedef struct _SET_MEMORY_CLOCK_PARAMETERS
-{
- ULONG ulTargetMemoryClock; //In 10Khz unit
-}SET_MEMORY_CLOCK_PARAMETERS;
-
-typedef struct _SET_MEMORY_CLOCK_PS_ALLOCATION
-{
- ULONG ulTargetMemoryClock; //In 10Khz unit
- COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_PS_ALLOCATION sReserved;
-}SET_MEMORY_CLOCK_PS_ALLOCATION;
-
-/****************************************************************************/
-// Structures used by ASIC_Init.ctb
-/****************************************************************************/
-typedef struct _ASIC_INIT_PARAMETERS
-{
- ULONG ulDefaultEngineClock; //In 10Khz unit
- ULONG ulDefaultMemoryClock; //In 10Khz unit
-}ASIC_INIT_PARAMETERS;
-
-typedef struct _ASIC_INIT_PS_ALLOCATION
-{
- ASIC_INIT_PARAMETERS sASICInitClocks;
- SET_ENGINE_CLOCK_PS_ALLOCATION sReserved; //Caller doesn't need to init this structure
-}ASIC_INIT_PS_ALLOCATION;
-
-/****************************************************************************/
-// Structure used by DynamicClockGatingTable.ctb
-/****************************************************************************/
-typedef struct _DYNAMIC_CLOCK_GATING_PARAMETERS
-{
- UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE
- UCHAR ucPadding[3];
-}DYNAMIC_CLOCK_GATING_PARAMETERS;
-#define DYNAMIC_CLOCK_GATING_PS_ALLOCATION DYNAMIC_CLOCK_GATING_PARAMETERS
-
-/****************************************************************************/
-// Structure used by EnableASIC_StaticPwrMgtTable.ctb
-/****************************************************************************/
-typedef struct _ENABLE_ASIC_STATIC_PWR_MGT_PARAMETERS
-{
- UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE
- UCHAR ucPadding[3];
-}ENABLE_ASIC_STATIC_PWR_MGT_PARAMETERS;
-#define ENABLE_ASIC_STATIC_PWR_MGT_PS_ALLOCATION ENABLE_ASIC_STATIC_PWR_MGT_PARAMETERS
-
-/****************************************************************************/
-// Structures used by DAC_LoadDetectionTable.ctb
-/****************************************************************************/
-typedef struct _DAC_LOAD_DETECTION_PARAMETERS
-{
- USHORT usDeviceID; //{ATOM_DEVICE_CRTx_SUPPORT,ATOM_DEVICE_TVx_SUPPORT,ATOM_DEVICE_CVx_SUPPORT}
- UCHAR ucDacType; //{ATOM_DAC_A,ATOM_DAC_B, ATOM_EXT_DAC}
- UCHAR ucMisc; //Valid only when table revision =1.3 and above
-}DAC_LOAD_DETECTION_PARAMETERS;
-
-// DAC_LOAD_DETECTION_PARAMETERS.ucMisc
-#define DAC_LOAD_MISC_YPrPb 0x01
-
-typedef struct _DAC_LOAD_DETECTION_PS_ALLOCATION
-{
- DAC_LOAD_DETECTION_PARAMETERS sDacload;
- ULONG Reserved[2];// Don't set this one, allocation for EXT DAC
-}DAC_LOAD_DETECTION_PS_ALLOCATION;
-
-/****************************************************************************/
-// Structures used by DAC1EncoderControlTable.ctb and DAC2EncoderControlTable.ctb
-/****************************************************************************/
-typedef struct _DAC_ENCODER_CONTROL_PARAMETERS
-{
- USHORT usPixelClock; // in 10KHz; for bios convenient
- UCHAR ucDacStandard; // See definition of ATOM_DACx_xxx, For DEC3.0, bit 7 used as internal flag to indicate DAC2 (==1) or DAC1 (==0)
- UCHAR ucAction; // 0: turn off encoder
- // 1: setup and turn on encoder
- // 7: ATOM_ENCODER_INIT Initialize DAC
-}DAC_ENCODER_CONTROL_PARAMETERS;
-
-#define DAC_ENCODER_CONTROL_PS_ALLOCATION DAC_ENCODER_CONTROL_PARAMETERS
-
-/****************************************************************************/
-// Structures used by DIG1EncoderControlTable
-// DIG2EncoderControlTable
-// ExternalEncoderControlTable
-/****************************************************************************/
-typedef struct _DIG_ENCODER_CONTROL_PARAMETERS
-{
- USHORT usPixelClock; // in 10KHz; for bios convenient
- UCHAR ucConfig;
- // [2] Link Select:
- // =0: PHY linkA if bfLane<3
- // =1: PHY linkB if bfLanes<3
- // =0: PHY linkA+B if bfLanes=3
- // [3] Transmitter Sel
- // =0: UNIPHY or PCIEPHY
- // =1: LVTMA
- UCHAR ucAction; // =0: turn off encoder
- // =1: turn on encoder
- UCHAR ucEncoderMode;
- // =0: DP encoder
- // =1: LVDS encoder
- // =2: DVI encoder
- // =3: HDMI encoder
- // =4: SDVO encoder
- UCHAR ucLaneNum; // how many lanes to enable
- UCHAR ucReserved[2];
-}DIG_ENCODER_CONTROL_PARAMETERS;
-#define DIG_ENCODER_CONTROL_PS_ALLOCATION DIG_ENCODER_CONTROL_PARAMETERS
-#define EXTERNAL_ENCODER_CONTROL_PARAMETER DIG_ENCODER_CONTROL_PARAMETERS
-
-//ucConfig
-#define ATOM_ENCODER_CONFIG_DPLINKRATE_MASK 0x01
-#define ATOM_ENCODER_CONFIG_DPLINKRATE_1_62GHZ 0x00
-#define ATOM_ENCODER_CONFIG_DPLINKRATE_2_70GHZ 0x01
-#define ATOM_ENCODER_CONFIG_LINK_SEL_MASK 0x04
-#define ATOM_ENCODER_CONFIG_LINKA 0x00
-#define ATOM_ENCODER_CONFIG_LINKB 0x04
-#define ATOM_ENCODER_CONFIG_LINKA_B ATOM_TRANSMITTER_CONFIG_LINKA
-#define ATOM_ENCODER_CONFIG_LINKB_A ATOM_ENCODER_CONFIG_LINKB
-#define ATOM_ENCODER_CONFIG_TRANSMITTER_SEL_MASK 0x08
-#define ATOM_ENCODER_CONFIG_UNIPHY 0x00
-#define ATOM_ENCODER_CONFIG_LVTMA 0x08
-#define ATOM_ENCODER_CONFIG_TRANSMITTER1 0x00
-#define ATOM_ENCODER_CONFIG_TRANSMITTER2 0x08
-#define ATOM_ENCODER_CONFIG_DIGB 0x80 // VBIOS Internal use, outside SW should set this bit=0
-// ucAction
-// ATOM_ENABLE: Enable Encoder
-// ATOM_DISABLE: Disable Encoder
-
-//ucEncoderMode
-#define ATOM_ENCODER_MODE_DP 0
-#define ATOM_ENCODER_MODE_LVDS 1
-#define ATOM_ENCODER_MODE_DVI 2
-#define ATOM_ENCODER_MODE_HDMI 3
-#define ATOM_ENCODER_MODE_SDVO 4
-#define ATOM_ENCODER_MODE_TV 13
-#define ATOM_ENCODER_MODE_CV 14
-#define ATOM_ENCODER_MODE_CRT 15
-
-typedef struct _ATOM_DIG_ENCODER_CONFIG_V2
-{
-#if ATOM_BIG_ENDIAN
- UCHAR ucReserved1:2;
- UCHAR ucTransmitterSel:2; // =0: UniphyAB, =1: UniphyCD =2: UniphyEF
- UCHAR ucLinkSel:1; // =0: linkA/C/E =1: linkB/D/F
- UCHAR ucReserved:1;
- UCHAR ucDPLinkRate:1; // =0: 1.62Ghz, =1: 2.7Ghz
-#else
- UCHAR ucDPLinkRate:1; // =0: 1.62Ghz, =1: 2.7Ghz
- UCHAR ucReserved:1;
- UCHAR ucLinkSel:1; // =0: linkA/C/E =1: linkB/D/F
- UCHAR ucTransmitterSel:2; // =0: UniphyAB, =1: UniphyCD =2: UniphyEF
- UCHAR ucReserved1:2;
-#endif
-}ATOM_DIG_ENCODER_CONFIG_V2;
-
-
-typedef struct _DIG_ENCODER_CONTROL_PARAMETERS_V2
-{
- USHORT usPixelClock; // in 10KHz; for bios convenient
- ATOM_DIG_ENCODER_CONFIG_V2 acConfig;
- UCHAR ucAction;
- UCHAR ucEncoderMode;
- // =0: DP encoder
- // =1: LVDS encoder
- // =2: DVI encoder
- // =3: HDMI encoder
- // =4: SDVO encoder
- UCHAR ucLaneNum; // how many lanes to enable
- UCHAR ucReserved[2];
-}DIG_ENCODER_CONTROL_PARAMETERS_V2;
-
-//ucConfig
-#define ATOM_ENCODER_CONFIG_V2_DPLINKRATE_MASK 0x01
-#define ATOM_ENCODER_CONFIG_V2_DPLINKRATE_1_62GHZ 0x00
-#define ATOM_ENCODER_CONFIG_V2_DPLINKRATE_2_70GHZ 0x01
-#define ATOM_ENCODER_CONFIG_V2_LINK_SEL_MASK 0x04
-#define ATOM_ENCODER_CONFIG_V2_LINKA 0x00
-#define ATOM_ENCODER_CONFIG_V2_LINKB 0x04
-#define ATOM_ENCODER_CONFIG_V2_TRANSMITTER_SEL_MASK 0x18
-#define ATOM_ENCODER_CONFIG_V2_TRANSMITTER1 0x00
-#define ATOM_ENCODER_CONFIG_V2_TRANSMITTER2 0x08
-#define ATOM_ENCODER_CONFIG_V2_TRANSMITTER3 0x10
-
-/****************************************************************************/
-// Structures used by UNIPHYTransmitterControlTable
-// LVTMATransmitterControlTable
-// DVOOutputControlTable
-/****************************************************************************/
-typedef struct _ATOM_DP_VS_MODE
-{
- UCHAR ucLaneSel;
- UCHAR ucLaneSet;
-}ATOM_DP_VS_MODE;
-
-typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS
-{
- union
- {
- USHORT usPixelClock; // in 10KHz; for bios convenient
- USHORT usInitInfo; // when init uniphy,lower 8bit is used for connector type defined in objectid.h
- ATOM_DP_VS_MODE asMode; // DP Voltage swing mode
- };
- UCHAR ucConfig;
- // [0]=0: 4 lane Link,
- // =1: 8 lane Link ( Dual Links TMDS )
- // [1]=0: InCoherent mode
- // =1: Coherent Mode
- // [2] Link Select:
- // =0: PHY linkA if bfLane<3
- // =1: PHY linkB if bfLanes<3
- // =0: PHY linkA+B if bfLanes=3
- // [5:4]PCIE lane Sel
- // =0: lane 0~3 or 0~7
- // =1: lane 4~7
- // =2: lane 8~11 or 8~15
- // =3: lane 12~15
- UCHAR ucAction; // =0: turn off encoder
- // =1: turn on encoder
- UCHAR ucReserved[4];
-}DIG_TRANSMITTER_CONTROL_PARAMETERS;
-
-#define DIG_TRANSMITTER_CONTROL_PS_ALLOCATION DIG_TRANSMITTER_CONTROL_PARAMETERS
-
-//ucInitInfo
-#define ATOM_TRAMITTER_INITINFO_CONNECTOR_MASK 0x00ff
-
-//ucConfig
-#define ATOM_TRANSMITTER_CONFIG_8LANE_LINK 0x01
-#define ATOM_TRANSMITTER_CONFIG_COHERENT 0x02
-#define ATOM_TRANSMITTER_CONFIG_LINK_SEL_MASK 0x04
-#define ATOM_TRANSMITTER_CONFIG_LINKA 0x00
-#define ATOM_TRANSMITTER_CONFIG_LINKB 0x04
-#define ATOM_TRANSMITTER_CONFIG_LINKA_B 0x00
-#define ATOM_TRANSMITTER_CONFIG_LINKB_A 0x04
-
-#define ATOM_TRANSMITTER_CONFIG_ENCODER_SEL_MASK 0x08 // only used when ATOM_TRANSMITTER_ACTION_ENABLE
-#define ATOM_TRANSMITTER_CONFIG_DIG1_ENCODER 0x00 // only used when ATOM_TRANSMITTER_ACTION_ENABLE
-#define ATOM_TRANSMITTER_CONFIG_DIG2_ENCODER 0x08 // only used when ATOM_TRANSMITTER_ACTION_ENABLE
-
-#define ATOM_TRANSMITTER_CONFIG_CLKSRC_MASK 0x30
-#define ATOM_TRANSMITTER_CONFIG_CLKSRC_PPLL 0x00
-#define ATOM_TRANSMITTER_CONFIG_CLKSRC_PCIE 0x20
-#define ATOM_TRANSMITTER_CONFIG_CLKSRC_XTALIN 0x30
-#define ATOM_TRANSMITTER_CONFIG_LANE_SEL_MASK 0xc0
-#define ATOM_TRANSMITTER_CONFIG_LANE_0_3 0x00
-#define ATOM_TRANSMITTER_CONFIG_LANE_0_7 0x00
-#define ATOM_TRANSMITTER_CONFIG_LANE_4_7 0x40
-#define ATOM_TRANSMITTER_CONFIG_LANE_8_11 0x80
-#define ATOM_TRANSMITTER_CONFIG_LANE_8_15 0x80
-#define ATOM_TRANSMITTER_CONFIG_LANE_12_15 0xc0
-
-//ucAction
-#define ATOM_TRANSMITTER_ACTION_DISABLE 0
-#define ATOM_TRANSMITTER_ACTION_ENABLE 1
-#define ATOM_TRANSMITTER_ACTION_LCD_BLOFF 2
-#define ATOM_TRANSMITTER_ACTION_LCD_BLON 3
-#define ATOM_TRANSMITTER_ACTION_BL_BRIGHTNESS_CONTROL 4
-#define ATOM_TRANSMITTER_ACTION_LCD_SELFTEST_START 5
-#define ATOM_TRANSMITTER_ACTION_LCD_SELFTEST_STOP 6
-#define ATOM_TRANSMITTER_ACTION_INIT 7
-#define ATOM_TRANSMITTER_ACTION_DISABLE_OUTPUT 8
-#define ATOM_TRANSMITTER_ACTION_ENABLE_OUTPUT 9
-#define ATOM_TRANSMITTER_ACTION_SETUP 10
-#define ATOM_TRANSMITTER_ACTION_SETUP_VSEMPH 11
-
-
-// Following are used for DigTransmitterControlTable ver1.2
-typedef struct _ATOM_DIG_TRANSMITTER_CONFIG_V2
-{
-#if ATOM_BIG_ENDIAN
- UCHAR ucTransmitterSel:2; //bit7:6: =0 Dig Transmitter 1 ( Uniphy AB )
- // =1 Dig Transmitter 2 ( Uniphy CD )
- // =2 Dig Transmitter 3 ( Uniphy EF )
- UCHAR ucReserved:1;
- UCHAR fDPConnector:1; //bit4=0: DP connector =1: None DP connector
- UCHAR ucEncoderSel:1; //bit3=0: Data/Clk path source from DIGA( DIG inst0 ). =1: Data/clk path source from DIGB ( DIG inst1 )
- UCHAR ucLinkSel:1; //bit2=0: Uniphy LINKA or C or E when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is A or C or E
- // =1: Uniphy LINKB or D or F when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is B or D or F
-
- UCHAR fCoherentMode:1; //bit1=1: Coherent Mode ( for DVI/HDMI mode )
- UCHAR fDualLinkConnector:1; //bit0=1: Dual Link DVI connector
-#else
- UCHAR fDualLinkConnector:1; //bit0=1: Dual Link DVI connector
- UCHAR fCoherentMode:1; //bit1=1: Coherent Mode ( for DVI/HDMI mode )
- UCHAR ucLinkSel:1; //bit2=0: Uniphy LINKA or C or E when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is A or C or E
- // =1: Uniphy LINKB or D or F when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is B or D or F
- UCHAR ucEncoderSel:1; //bit3=0: Data/Clk path source from DIGA( DIG inst0 ). =1: Data/clk path source from DIGB ( DIG inst1 )
- UCHAR fDPConnector:1; //bit4=0: DP connector =1: None DP connector
- UCHAR ucReserved:1;
- UCHAR ucTransmitterSel:2; //bit7:6: =0 Dig Transmitter 1 ( Uniphy AB )
- // =1 Dig Transmitter 2 ( Uniphy CD )
- // =2 Dig Transmitter 3 ( Uniphy EF )
-#endif
-}ATOM_DIG_TRANSMITTER_CONFIG_V2;
-
-//ucConfig
-//Bit0
-#define ATOM_TRANSMITTER_CONFIG_V2_DUAL_LINK_CONNECTOR 0x01
-
-//Bit1
-#define ATOM_TRANSMITTER_CONFIG_V2_COHERENT 0x02
-
-//Bit2
-#define ATOM_TRANSMITTER_CONFIG_V2_LINK_SEL_MASK 0x04
-#define ATOM_TRANSMITTER_CONFIG_V2_LINKA 0x00
-#define ATOM_TRANSMITTER_CONFIG_V2_LINKB 0x04
-
-// Bit3
-#define ATOM_TRANSMITTER_CONFIG_V2_ENCODER_SEL_MASK 0x08
-#define ATOM_TRANSMITTER_CONFIG_V2_DIG1_ENCODER 0x00 // only used when ucAction == ATOM_TRANSMITTER_ACTION_ENABLE or ATOM_TRANSMITTER_ACTION_SETUP
-#define ATOM_TRANSMITTER_CONFIG_V2_DIG2_ENCODER 0x08 // only used when ucAction == ATOM_TRANSMITTER_ACTION_ENABLE or ATOM_TRANSMITTER_ACTION_SETUP
-
-// Bit4
-#define ATOM_TRASMITTER_CONFIG_V2_DP_CONNECTOR 0x10
-
-// Bit7:6
-#define ATOM_TRANSMITTER_CONFIG_V2_TRANSMITTER_SEL_MASK 0xC0
-#define ATOM_TRANSMITTER_CONFIG_V2_TRANSMITTER1 0x00 //AB
-#define ATOM_TRANSMITTER_CONFIG_V2_TRANSMITTER2 0x40 //CD
-#define ATOM_TRANSMITTER_CONFIG_V2_TRANSMITTER3 0x80 //EF
-
-typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS_V2
-{
- union
- {
- USHORT usPixelClock; // in 10KHz; for bios convenient
- USHORT usInitInfo; // when init uniphy,lower 8bit is used for connector type defined in objectid.h
- ATOM_DP_VS_MODE asMode; // DP Voltage swing mode
- };
- ATOM_DIG_TRANSMITTER_CONFIG_V2 acConfig;
- UCHAR ucAction; // define as ATOM_TRANSMITER_ACTION_XXX
- UCHAR ucReserved[4];
-}DIG_TRANSMITTER_CONTROL_PARAMETERS_V2;
-
-
-/****************************************************************************/
-// Structures used by DAC1OuputControlTable
-// DAC2OuputControlTable
-// LVTMAOutputControlTable (Before DEC30)
-// TMDSAOutputControlTable (Before DEC30)
-/****************************************************************************/
-typedef struct _DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
-{
- UCHAR ucAction; // Possible input:ATOM_ENABLE||ATOMDISABLE
- // When the display is LCD, in addition to above:
- // ATOM_LCD_BLOFF|| ATOM_LCD_BLON ||ATOM_LCD_BL_BRIGHTNESS_CONTROL||ATOM_LCD_SELFTEST_START||
- // ATOM_LCD_SELFTEST_STOP
-
- UCHAR aucPadding[3]; // padding to DWORD aligned
-}DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS;
-
-#define DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
-
-
-#define CRT1_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
-#define CRT1_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
-
-#define CRT2_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
-#define CRT2_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
-
-#define CV1_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
-#define CV1_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
-
-#define TV1_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
-#define TV1_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
-
-#define DFP1_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
-#define DFP1_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
-
-#define DFP2_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
-#define DFP2_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
-
-#define LCD1_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
-#define LCD1_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
-
-#define DVO_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
-#define DVO_OUTPUT_CONTROL_PS_ALLOCATION DIG_TRANSMITTER_CONTROL_PS_ALLOCATION
-#define DVO_OUTPUT_CONTROL_PARAMETERS_V3 DIG_TRANSMITTER_CONTROL_PARAMETERS
-
-/****************************************************************************/
-// Structures used by BlankCRTCTable
-/****************************************************************************/
-typedef struct _BLANK_CRTC_PARAMETERS
-{
- UCHAR ucCRTC; // ATOM_CRTC1 or ATOM_CRTC2
- UCHAR ucBlanking; // ATOM_BLANKING or ATOM_BLANKINGOFF
- USHORT usBlackColorRCr;
- USHORT usBlackColorGY;
- USHORT usBlackColorBCb;
-}BLANK_CRTC_PARAMETERS;
-#define BLANK_CRTC_PS_ALLOCATION BLANK_CRTC_PARAMETERS
-
-/****************************************************************************/
-// Structures used by EnableCRTCTable
-// EnableCRTCMemReqTable
-// UpdateCRTC_DoubleBufferRegistersTable
-/****************************************************************************/
-typedef struct _ENABLE_CRTC_PARAMETERS
-{
- UCHAR ucCRTC; // ATOM_CRTC1 or ATOM_CRTC2
- UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE
- UCHAR ucPadding[2];
-}ENABLE_CRTC_PARAMETERS;
-#define ENABLE_CRTC_PS_ALLOCATION ENABLE_CRTC_PARAMETERS
-
-/****************************************************************************/
-// Structures used by SetCRTC_OverScanTable
-/****************************************************************************/
-typedef struct _SET_CRTC_OVERSCAN_PARAMETERS
-{
- USHORT usOverscanRight; // right
- USHORT usOverscanLeft; // left
- USHORT usOverscanBottom; // bottom
- USHORT usOverscanTop; // top
- UCHAR ucCRTC; // ATOM_CRTC1 or ATOM_CRTC2
- UCHAR ucPadding[3];
-}SET_CRTC_OVERSCAN_PARAMETERS;
-#define SET_CRTC_OVERSCAN_PS_ALLOCATION SET_CRTC_OVERSCAN_PARAMETERS
-
-/****************************************************************************/
-// Structures used by SetCRTC_ReplicationTable
-/****************************************************************************/
-typedef struct _SET_CRTC_REPLICATION_PARAMETERS
-{
- UCHAR ucH_Replication; // horizontal replication
- UCHAR ucV_Replication; // vertical replication
- UCHAR usCRTC; // ATOM_CRTC1 or ATOM_CRTC2
- UCHAR ucPadding;
-}SET_CRTC_REPLICATION_PARAMETERS;
-#define SET_CRTC_REPLICATION_PS_ALLOCATION SET_CRTC_REPLICATION_PARAMETERS
-
-/****************************************************************************/
-// Structures used by SelectCRTC_SourceTable
-/****************************************************************************/
-typedef struct _SELECT_CRTC_SOURCE_PARAMETERS
-{
- UCHAR ucCRTC; // ATOM_CRTC1 or ATOM_CRTC2
- UCHAR ucDevice; // ATOM_DEVICE_CRT1|ATOM_DEVICE_CRT2|....
- UCHAR ucPadding[2];
-}SELECT_CRTC_SOURCE_PARAMETERS;
-#define SELECT_CRTC_SOURCE_PS_ALLOCATION SELECT_CRTC_SOURCE_PARAMETERS
-
-typedef struct _SELECT_CRTC_SOURCE_PARAMETERS_V2
-{
- UCHAR ucCRTC; // ATOM_CRTC1 or ATOM_CRTC2
- UCHAR ucEncoderID; // DAC1/DAC2/TVOUT/DIG1/DIG2/DVO
- UCHAR ucEncodeMode; // Encoding mode, only valid when using DIG1/DIG2/DVO
- UCHAR ucPadding;
-}SELECT_CRTC_SOURCE_PARAMETERS_V2;
-
-//ucEncoderID
-//#define ASIC_INT_DAC1_ENCODER_ID 0x00
-//#define ASIC_INT_TV_ENCODER_ID 0x02
-//#define ASIC_INT_DIG1_ENCODER_ID 0x03
-//#define ASIC_INT_DAC2_ENCODER_ID 0x04
-//#define ASIC_EXT_TV_ENCODER_ID 0x06
-//#define ASIC_INT_DVO_ENCODER_ID 0x07
-//#define ASIC_INT_DIG2_ENCODER_ID 0x09
-//#define ASIC_EXT_DIG_ENCODER_ID 0x05
-
-//ucEncodeMode
-//#define ATOM_ENCODER_MODE_DP 0
-//#define ATOM_ENCODER_MODE_LVDS 1
-//#define ATOM_ENCODER_MODE_DVI 2
-//#define ATOM_ENCODER_MODE_HDMI 3
-//#define ATOM_ENCODER_MODE_SDVO 4
-//#define ATOM_ENCODER_MODE_TV 13
-//#define ATOM_ENCODER_MODE_CV 14
-//#define ATOM_ENCODER_MODE_CRT 15
-
-/****************************************************************************/
-// Structures used by SetPixelClockTable
-// GetPixelClockTable
-/****************************************************************************/
-//Major revision=1., Minor revision=1
-typedef struct _PIXEL_CLOCK_PARAMETERS
-{
- USHORT usPixelClock; // in 10kHz unit; for bios convenient = (RefClk*FB_Div)/(Ref_Div*Post_Div)
- // 0 means disable PPLL
- USHORT usRefDiv; // Reference divider
- USHORT usFbDiv; // feedback divider
- UCHAR ucPostDiv; // post divider
- UCHAR ucFracFbDiv; // fractional feedback divider
- UCHAR ucPpll; // ATOM_PPLL1 or ATOM_PPL2
- UCHAR ucRefDivSrc; // ATOM_PJITTER or ATO_NONPJITTER
- UCHAR ucCRTC; // Which CRTC uses this Ppll
- UCHAR ucPadding;
-}PIXEL_CLOCK_PARAMETERS;
-
-//Major revision=1., Minor revision=2, add ucMiscIfno
-//ucMiscInfo:
-#define MISC_FORCE_REPROG_PIXEL_CLOCK 0x1
-#define MISC_DEVICE_INDEX_MASK 0xF0
-#define MISC_DEVICE_INDEX_SHIFT 4
-
-typedef struct _PIXEL_CLOCK_PARAMETERS_V2
-{
- USHORT usPixelClock; // in 10kHz unit; for bios convenient = (RefClk*FB_Div)/(Ref_Div*Post_Div)
- // 0 means disable PPLL
- USHORT usRefDiv; // Reference divider
- USHORT usFbDiv; // feedback divider
- UCHAR ucPostDiv; // post divider
- UCHAR ucFracFbDiv; // fractional feedback divider
- UCHAR ucPpll; // ATOM_PPLL1 or ATOM_PPL2
- UCHAR ucRefDivSrc; // ATOM_PJITTER or ATO_NONPJITTER
- UCHAR ucCRTC; // Which CRTC uses this Ppll
- UCHAR ucMiscInfo; // Different bits for different purpose, bit [7:4] as device index, bit[0]=Force prog
-}PIXEL_CLOCK_PARAMETERS_V2;
-
-//Major revision=1., Minor revision=3, structure/definition change
-//ucEncoderMode:
-//ATOM_ENCODER_MODE_DP
-//ATOM_ENOCDER_MODE_LVDS
-//ATOM_ENOCDER_MODE_DVI
-//ATOM_ENOCDER_MODE_HDMI
-//ATOM_ENOCDER_MODE_SDVO
-//ATOM_ENCODER_MODE_TV 13
-//ATOM_ENCODER_MODE_CV 14
-//ATOM_ENCODER_MODE_CRT 15
-
-//ucDVOConfig
-//#define DVO_ENCODER_CONFIG_RATE_SEL 0x01
-//#define DVO_ENCODER_CONFIG_DDR_SPEED 0x00
-//#define DVO_ENCODER_CONFIG_SDR_SPEED 0x01
-//#define DVO_ENCODER_CONFIG_OUTPUT_SEL 0x0c
-//#define DVO_ENCODER_CONFIG_LOW12BIT 0x00
-//#define DVO_ENCODER_CONFIG_UPPER12BIT 0x04
-//#define DVO_ENCODER_CONFIG_24BIT 0x08
-
-//ucMiscInfo: also changed, see below
-#define PIXEL_CLOCK_MISC_FORCE_PROG_PPLL 0x01
-#define PIXEL_CLOCK_MISC_VGA_MODE 0x02
-#define PIXEL_CLOCK_MISC_CRTC_SEL_MASK 0x04
-#define PIXEL_CLOCK_MISC_CRTC_SEL_CRTC1 0x00
-#define PIXEL_CLOCK_MISC_CRTC_SEL_CRTC2 0x04
-#define PIXEL_CLOCK_MISC_USE_ENGINE_FOR_DISPCLK 0x08
-
-typedef struct _PIXEL_CLOCK_PARAMETERS_V3
-{
- USHORT usPixelClock; // in 10kHz unit; for bios convenient = (RefClk*FB_Div)/(Ref_Div*Post_Div)
- // 0 means disable PPLL. For VGA PPLL,make sure this value is not 0.
- USHORT usRefDiv; // Reference divider
- USHORT usFbDiv; // feedback divider
- UCHAR ucPostDiv; // post divider
- UCHAR ucFracFbDiv; // fractional feedback divider
- UCHAR ucPpll; // ATOM_PPLL1 or ATOM_PPL2
- UCHAR ucTransmitterId; // graphic encoder id defined in objectId.h
- union
- {
- UCHAR ucEncoderMode; // encoder type defined as ATOM_ENCODER_MODE_DP/DVI/HDMI/
- UCHAR ucDVOConfig; // when use DVO, need to know SDR/DDR, 12bit or 24bit
- };
- UCHAR ucMiscInfo; // bit[0]=Force program, bit[1]= set pclk for VGA, b[2]= CRTC sel
- // bit[3]=0:use PPLL for dispclk source, =1: use engine clock for dispclock source
-}PIXEL_CLOCK_PARAMETERS_V3;
-
-#define PIXEL_CLOCK_PARAMETERS_LAST PIXEL_CLOCK_PARAMETERS_V2
-#define GET_PIXEL_CLOCK_PS_ALLOCATION PIXEL_CLOCK_PARAMETERS_LAST
-
-/****************************************************************************/
-// Structures used by AdjustDisplayPllTable
-/****************************************************************************/
-typedef struct _ADJUST_DISPLAY_PLL_PARAMETERS
-{
- USHORT usPixelClock;
- UCHAR ucTransmitterID;
- UCHAR ucEncodeMode;
- union
- {
- UCHAR ucDVOConfig; //if DVO, need passing link rate and output 12bitlow or 24bit
- UCHAR ucConfig; //if none DVO, not defined yet
- };
- UCHAR ucReserved[3];
-}ADJUST_DISPLAY_PLL_PARAMETERS;
-
-#define ADJUST_DISPLAY_CONFIG_SS_ENABLE 0x10
-
-#define ADJUST_DISPLAY_PLL_PS_ALLOCATION ADJUST_DISPLAY_PLL_PARAMETERS
-
-/****************************************************************************/
-// Structures used by EnableYUVTable
-/****************************************************************************/
-typedef struct _ENABLE_YUV_PARAMETERS
-{
- UCHAR ucEnable; // ATOM_ENABLE:Enable YUV or ATOM_DISABLE:Disable YUV (RGB)
- UCHAR ucCRTC; // Which CRTC needs this YUV or RGB format
- UCHAR ucPadding[2];
-}ENABLE_YUV_PARAMETERS;
-#define ENABLE_YUV_PS_ALLOCATION ENABLE_YUV_PARAMETERS
-
-/****************************************************************************/
-// Structures used by GetMemoryClockTable
-/****************************************************************************/
-typedef struct _GET_MEMORY_CLOCK_PARAMETERS
-{
- ULONG ulReturnMemoryClock; // current memory speed in 10KHz unit
-} GET_MEMORY_CLOCK_PARAMETERS;
-#define GET_MEMORY_CLOCK_PS_ALLOCATION GET_MEMORY_CLOCK_PARAMETERS
-
-/****************************************************************************/
-// Structures used by GetEngineClockTable
-/****************************************************************************/
-typedef struct _GET_ENGINE_CLOCK_PARAMETERS
-{
- ULONG ulReturnEngineClock; // current engine speed in 10KHz unit
-} GET_ENGINE_CLOCK_PARAMETERS;
-#define GET_ENGINE_CLOCK_PS_ALLOCATION GET_ENGINE_CLOCK_PARAMETERS
-
-/****************************************************************************/
-// Following Structures and constant may be obsolete
-/****************************************************************************/
-//Maxium 8 bytes,the data read in will be placed in the parameter space.
-//Read operaion successeful when the paramter space is non-zero, otherwise read operation failed
-typedef struct _READ_EDID_FROM_HW_I2C_DATA_PARAMETERS
-{
- USHORT usPrescale; //Ratio between Engine clock and I2C clock
- USHORT usVRAMAddress; //Adress in Frame Buffer where to pace raw EDID
- USHORT usStatus; //When use output: lower byte EDID checksum, high byte hardware status
- //WHen use input: lower byte as 'byte to read':currently limited to 128byte or 1byte
- UCHAR ucSlaveAddr; //Read from which slave
- UCHAR ucLineNumber; //Read from which HW assisted line
-}READ_EDID_FROM_HW_I2C_DATA_PARAMETERS;
-#define READ_EDID_FROM_HW_I2C_DATA_PS_ALLOCATION READ_EDID_FROM_HW_I2C_DATA_PARAMETERS
-
-
-#define ATOM_WRITE_I2C_FORMAT_PSOFFSET_PSDATABYTE 0
-#define ATOM_WRITE_I2C_FORMAT_PSOFFSET_PSTWODATABYTES 1
-#define ATOM_WRITE_I2C_FORMAT_PSCOUNTER_PSOFFSET_IDDATABLOCK 2
-#define ATOM_WRITE_I2C_FORMAT_PSCOUNTER_IDOFFSET_PLUS_IDDATABLOCK 3
-#define ATOM_WRITE_I2C_FORMAT_IDCOUNTER_IDOFFSET_IDDATABLOCK 4
-
-typedef struct _WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS
-{
- USHORT usPrescale; //Ratio between Engine clock and I2C clock
- USHORT usByteOffset; //Write to which byte
- //Upper portion of usByteOffset is Format of data
- //1bytePS+offsetPS
- //2bytesPS+offsetPS
- //blockID+offsetPS
- //blockID+offsetID
- //blockID+counterID+offsetID
- UCHAR ucData; //PS data1
- UCHAR ucStatus; //Status byte 1=success, 2=failure, Also is used as PS data2
- UCHAR ucSlaveAddr; //Write to which slave
- UCHAR ucLineNumber; //Write from which HW assisted line
-}WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS;
-
-#define WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS
-
-typedef struct _SET_UP_HW_I2C_DATA_PARAMETERS
-{
- USHORT usPrescale; //Ratio between Engine clock and I2C clock
- UCHAR ucSlaveAddr; //Write to which slave
- UCHAR ucLineNumber; //Write from which HW assisted line
-}SET_UP_HW_I2C_DATA_PARAMETERS;
-
-
-/**************************************************************************/
-#define SPEED_FAN_CONTROL_PS_ALLOCATION WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS
-
-/****************************************************************************/
-// Structures used by PowerConnectorDetectionTable
-/****************************************************************************/
-typedef struct _POWER_CONNECTOR_DETECTION_PARAMETERS
-{
- UCHAR ucPowerConnectorStatus; //Used for return value 0: detected, 1:not detected
- UCHAR ucPwrBehaviorId;
- USHORT usPwrBudget; //how much power currently boot to in unit of watt
-}POWER_CONNECTOR_DETECTION_PARAMETERS;
-
-typedef struct POWER_CONNECTOR_DETECTION_PS_ALLOCATION
-{
- UCHAR ucPowerConnectorStatus; //Used for return value 0: detected, 1:not detected
- UCHAR ucReserved;
- USHORT usPwrBudget; //how much power currently boot to in unit of watt
- WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved;
-}POWER_CONNECTOR_DETECTION_PS_ALLOCATION;
-
-/****************************LVDS SS Command Table Definitions**********************/
-
-/****************************************************************************/
-// Structures used by EnableSpreadSpectrumOnPPLLTable
-/****************************************************************************/
-typedef struct _ENABLE_LVDS_SS_PARAMETERS
-{
- USHORT usSpreadSpectrumPercentage;
- UCHAR ucSpreadSpectrumType; //Bit1=0 Down Spread,=1 Center Spread. Bit1=1 Ext. =0 Int. Others:TBD
- UCHAR ucSpreadSpectrumStepSize_Delay; //bits3:2 SS_STEP_SIZE; bit 6:4 SS_DELAY
- UCHAR ucEnable; //ATOM_ENABLE or ATOM_DISABLE
- UCHAR ucPadding[3];
-}ENABLE_LVDS_SS_PARAMETERS;
-
-//ucTableFormatRevision=1,ucTableContentRevision=2
-typedef struct _ENABLE_LVDS_SS_PARAMETERS_V2
-{
- USHORT usSpreadSpectrumPercentage;
- UCHAR ucSpreadSpectrumType; //Bit1=0 Down Spread,=1 Center Spread. Bit1=1 Ext. =0 Int. Others:TBD
- UCHAR ucSpreadSpectrumStep; //
- UCHAR ucEnable; //ATOM_ENABLE or ATOM_DISABLE
- UCHAR ucSpreadSpectrumDelay;
- UCHAR ucSpreadSpectrumRange;
- UCHAR ucPadding;
-}ENABLE_LVDS_SS_PARAMETERS_V2;
-
-//This new structure is based on ENABLE_LVDS_SS_PARAMETERS but expands to SS on PPLL, so other devices can use SS.
-typedef struct _ENABLE_SPREAD_SPECTRUM_ON_PPLL
-{
- USHORT usSpreadSpectrumPercentage;
- UCHAR ucSpreadSpectrumType; // Bit1=0 Down Spread,=1 Center Spread. Bit1=1 Ext. =0 Int. Others:TBD
- UCHAR ucSpreadSpectrumStep; //
- UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE
- UCHAR ucSpreadSpectrumDelay;
- UCHAR ucSpreadSpectrumRange;
- UCHAR ucPpll; // ATOM_PPLL1/ATOM_PPLL2
-}ENABLE_SPREAD_SPECTRUM_ON_PPLL;
-
-#define ENABLE_SPREAD_SPECTRUM_ON_PPLL_PS_ALLOCATION ENABLE_SPREAD_SPECTRUM_ON_PPLL
-
-/**************************************************************************/
-
-typedef struct _SET_PIXEL_CLOCK_PS_ALLOCATION
-{
- PIXEL_CLOCK_PARAMETERS sPCLKInput;
- ENABLE_SPREAD_SPECTRUM_ON_PPLL sReserved;//Caller doesn't need to init this portion
-}SET_PIXEL_CLOCK_PS_ALLOCATION;
-
-#define ENABLE_VGA_RENDER_PS_ALLOCATION SET_PIXEL_CLOCK_PS_ALLOCATION
-
-/****************************************************************************/
-// Structures used by ###
-/****************************************************************************/
-typedef struct _MEMORY_TRAINING_PARAMETERS
-{
- ULONG ulTargetMemoryClock; //In 10Khz unit
-}MEMORY_TRAINING_PARAMETERS;
-#define MEMORY_TRAINING_PS_ALLOCATION MEMORY_TRAINING_PARAMETERS
-
-
-/****************************LVDS and other encoder command table definitions **********************/
-
-
-/****************************************************************************/
-// Structures used by LVDSEncoderControlTable (Before DCE30)
-// LVTMAEncoderControlTable (Before DCE30)
-// TMDSAEncoderControlTable (Before DCE30)
-/****************************************************************************/
-typedef struct _LVDS_ENCODER_CONTROL_PARAMETERS
-{
- USHORT usPixelClock; // in 10KHz; for bios convenient
- UCHAR ucMisc; // bit0=0: Enable single link
- // =1: Enable dual link
- // Bit1=0: 666RGB
- // =1: 888RGB
- UCHAR ucAction; // 0: turn off encoder
- // 1: setup and turn on encoder
-}LVDS_ENCODER_CONTROL_PARAMETERS;
-
-#define LVDS_ENCODER_CONTROL_PS_ALLOCATION LVDS_ENCODER_CONTROL_PARAMETERS
-
-#define TMDS1_ENCODER_CONTROL_PARAMETERS LVDS_ENCODER_CONTROL_PARAMETERS
-#define TMDS1_ENCODER_CONTROL_PS_ALLOCATION TMDS1_ENCODER_CONTROL_PARAMETERS
-
-#define TMDS2_ENCODER_CONTROL_PARAMETERS TMDS1_ENCODER_CONTROL_PARAMETERS
-#define TMDS2_ENCODER_CONTROL_PS_ALLOCATION TMDS2_ENCODER_CONTROL_PARAMETERS
-
-
-//ucTableFormatRevision=1,ucTableContentRevision=2
-typedef struct _LVDS_ENCODER_CONTROL_PARAMETERS_V2
-{
- USHORT usPixelClock; // in 10KHz; for bios convenient
- UCHAR ucMisc; // see PANEL_ENCODER_MISC_xx defintions below
- UCHAR ucAction; // 0: turn off encoder
- // 1: setup and turn on encoder
- UCHAR ucTruncate; // bit0=0: Disable truncate
- // =1: Enable truncate
- // bit4=0: 666RGB
- // =1: 888RGB
- UCHAR ucSpatial; // bit0=0: Disable spatial dithering
- // =1: Enable spatial dithering
- // bit4=0: 666RGB
- // =1: 888RGB
- UCHAR ucTemporal; // bit0=0: Disable temporal dithering
- // =1: Enable temporal dithering
- // bit4=0: 666RGB
- // =1: 888RGB
- // bit5=0: Gray level 2
- // =1: Gray level 4
- UCHAR ucFRC; // bit4=0: 25FRC_SEL pattern E
- // =1: 25FRC_SEL pattern F
- // bit6:5=0: 50FRC_SEL pattern A
- // =1: 50FRC_SEL pattern B
- // =2: 50FRC_SEL pattern C
- // =3: 50FRC_SEL pattern D
- // bit7=0: 75FRC_SEL pattern E
- // =1: 75FRC_SEL pattern F
-}LVDS_ENCODER_CONTROL_PARAMETERS_V2;
-
-#define LVDS_ENCODER_CONTROL_PS_ALLOCATION_V2 LVDS_ENCODER_CONTROL_PARAMETERS_V2
-
-#define TMDS1_ENCODER_CONTROL_PARAMETERS_V2 LVDS_ENCODER_CONTROL_PARAMETERS_V2
-#define TMDS1_ENCODER_CONTROL_PS_ALLOCATION_V2 TMDS1_ENCODER_CONTROL_PARAMETERS_V2
-
-#define TMDS2_ENCODER_CONTROL_PARAMETERS_V2 TMDS1_ENCODER_CONTROL_PARAMETERS_V2
-#define TMDS2_ENCODER_CONTROL_PS_ALLOCATION_V2 TMDS2_ENCODER_CONTROL_PARAMETERS_V2
-
-#define LVDS_ENCODER_CONTROL_PARAMETERS_V3 LVDS_ENCODER_CONTROL_PARAMETERS_V2
-#define LVDS_ENCODER_CONTROL_PS_ALLOCATION_V3 LVDS_ENCODER_CONTROL_PARAMETERS_V3
-
-#define TMDS1_ENCODER_CONTROL_PARAMETERS_V3 LVDS_ENCODER_CONTROL_PARAMETERS_V3
-#define TMDS1_ENCODER_CONTROL_PS_ALLOCATION_V3 TMDS1_ENCODER_CONTROL_PARAMETERS_V3
-
-#define TMDS2_ENCODER_CONTROL_PARAMETERS_V3 LVDS_ENCODER_CONTROL_PARAMETERS_V3
-#define TMDS2_ENCODER_CONTROL_PS_ALLOCATION_V3 TMDS2_ENCODER_CONTROL_PARAMETERS_V3
-
-/****************************************************************************/
-// Structures used by ###
-/****************************************************************************/
-typedef struct _ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS
-{
- UCHAR ucEnable; // Enable or Disable External TMDS encoder
- UCHAR ucMisc; // Bit0=0:Enable Single link;=1:Enable Dual link;Bit1 {=0:666RGB, =1:888RGB}
- UCHAR ucPadding[2];
-}ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS;
-
-typedef struct _ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION
-{
- ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS sXTmdsEncoder;
- WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved; //Caller doesn't need to init this portion
-}ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION;
-
-#define ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS_V2 LVDS_ENCODER_CONTROL_PARAMETERS_V2
-
-typedef struct _ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION_V2
-{
- ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS_V2 sXTmdsEncoder;
- WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved; //Caller doesn't need to init this portion
-}ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION_V2;
-
-typedef struct _EXTERNAL_ENCODER_CONTROL_PS_ALLOCATION
-{
- DIG_ENCODER_CONTROL_PARAMETERS sDigEncoder;
- WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved;
-}EXTERNAL_ENCODER_CONTROL_PS_ALLOCATION;
-
-/****************************************************************************/
-// Structures used by DVOEncoderControlTable
-/****************************************************************************/
-//ucTableFormatRevision=1,ucTableContentRevision=3
-
-//ucDVOConfig:
-#define DVO_ENCODER_CONFIG_RATE_SEL 0x01
-#define DVO_ENCODER_CONFIG_DDR_SPEED 0x00
-#define DVO_ENCODER_CONFIG_SDR_SPEED 0x01
-#define DVO_ENCODER_CONFIG_OUTPUT_SEL 0x0c
-#define DVO_ENCODER_CONFIG_LOW12BIT 0x00
-#define DVO_ENCODER_CONFIG_UPPER12BIT 0x04
-#define DVO_ENCODER_CONFIG_24BIT 0x08
-
-typedef struct _DVO_ENCODER_CONTROL_PARAMETERS_V3
-{
- USHORT usPixelClock;
- UCHAR ucDVOConfig;
- UCHAR ucAction; //ATOM_ENABLE/ATOM_DISABLE/ATOM_HPD_INIT
- UCHAR ucReseved[4];
-}DVO_ENCODER_CONTROL_PARAMETERS_V3;
-#define DVO_ENCODER_CONTROL_PS_ALLOCATION_V3 DVO_ENCODER_CONTROL_PARAMETERS_V3
-
-//ucTableFormatRevision=1
-//ucTableContentRevision=3 structure is not changed but usMisc add bit 1 as another input for
-// bit1=0: non-coherent mode
-// =1: coherent mode
-
-//==========================================================================================
-//Only change is here next time when changing encoder parameter definitions again!
-#define LVDS_ENCODER_CONTROL_PARAMETERS_LAST LVDS_ENCODER_CONTROL_PARAMETERS_V3
-#define LVDS_ENCODER_CONTROL_PS_ALLOCATION_LAST LVDS_ENCODER_CONTROL_PARAMETERS_LAST
-
-#define TMDS1_ENCODER_CONTROL_PARAMETERS_LAST LVDS_ENCODER_CONTROL_PARAMETERS_V3
-#define TMDS1_ENCODER_CONTROL_PS_ALLOCATION_LAST TMDS1_ENCODER_CONTROL_PARAMETERS_LAST
-
-#define TMDS2_ENCODER_CONTROL_PARAMETERS_LAST LVDS_ENCODER_CONTROL_PARAMETERS_V3
-#define TMDS2_ENCODER_CONTROL_PS_ALLOCATION_LAST TMDS2_ENCODER_CONTROL_PARAMETERS_LAST
-
-#define DVO_ENCODER_CONTROL_PARAMETERS_LAST DVO_ENCODER_CONTROL_PARAMETERS
-#define DVO_ENCODER_CONTROL_PS_ALLOCATION_LAST DVO_ENCODER_CONTROL_PS_ALLOCATION
-
-//==========================================================================================
-#define PANEL_ENCODER_MISC_DUAL 0x01
-#define PANEL_ENCODER_MISC_COHERENT 0x02
-#define PANEL_ENCODER_MISC_TMDS_LINKB 0x04
-#define PANEL_ENCODER_MISC_HDMI_TYPE 0x08
-
-#define PANEL_ENCODER_ACTION_DISABLE ATOM_DISABLE
-#define PANEL_ENCODER_ACTION_ENABLE ATOM_ENABLE
-#define PANEL_ENCODER_ACTION_COHERENTSEQ (ATOM_ENABLE+1)
-
-#define PANEL_ENCODER_TRUNCATE_EN 0x01
-#define PANEL_ENCODER_TRUNCATE_DEPTH 0x10
-#define PANEL_ENCODER_SPATIAL_DITHER_EN 0x01
-#define PANEL_ENCODER_SPATIAL_DITHER_DEPTH 0x10
-#define PANEL_ENCODER_TEMPORAL_DITHER_EN 0x01
-#define PANEL_ENCODER_TEMPORAL_DITHER_DEPTH 0x10
-#define PANEL_ENCODER_TEMPORAL_LEVEL_4 0x20
-#define PANEL_ENCODER_25FRC_MASK 0x10
-#define PANEL_ENCODER_25FRC_E 0x00
-#define PANEL_ENCODER_25FRC_F 0x10
-#define PANEL_ENCODER_50FRC_MASK 0x60
-#define PANEL_ENCODER_50FRC_A 0x00
-#define PANEL_ENCODER_50FRC_B 0x20
-#define PANEL_ENCODER_50FRC_C 0x40
-#define PANEL_ENCODER_50FRC_D 0x60
-#define PANEL_ENCODER_75FRC_MASK 0x80
-#define PANEL_ENCODER_75FRC_E 0x00
-#define PANEL_ENCODER_75FRC_F 0x80
-
-/****************************************************************************/
-// Structures used by SetVoltageTable
-/****************************************************************************/
-#define SET_VOLTAGE_TYPE_ASIC_VDDC 1
-#define SET_VOLTAGE_TYPE_ASIC_MVDDC 2
-#define SET_VOLTAGE_TYPE_ASIC_MVDDQ 3
-#define SET_VOLTAGE_TYPE_ASIC_VDDCI 4
-#define SET_VOLTAGE_INIT_MODE 5
-#define SET_VOLTAGE_GET_MAX_VOLTAGE 6 //Gets the Max. voltage for the soldered Asic
-
-#define SET_ASIC_VOLTAGE_MODE_ALL_SOURCE 0x1
-#define SET_ASIC_VOLTAGE_MODE_SOURCE_A 0x2
-#define SET_ASIC_VOLTAGE_MODE_SOURCE_B 0x4
-
-#define SET_ASIC_VOLTAGE_MODE_SET_VOLTAGE 0x0
-#define SET_ASIC_VOLTAGE_MODE_GET_GPIOVAL 0x1
-#define SET_ASIC_VOLTAGE_MODE_GET_GPIOMASK 0x2
-
-typedef struct _SET_VOLTAGE_PARAMETERS
-{
- UCHAR ucVoltageType; // To tell which voltage to set up, VDDC/MVDDC/MVDDQ
- UCHAR ucVoltageMode; // To set all, to set source A or source B or ...
- UCHAR ucVoltageIndex; // An index to tell which voltage level
- UCHAR ucReserved;
-}SET_VOLTAGE_PARAMETERS;
-
-typedef struct _SET_VOLTAGE_PARAMETERS_V2
-{
- UCHAR ucVoltageType; // To tell which voltage to set up, VDDC/MVDDC/MVDDQ
- UCHAR ucVoltageMode; // Not used, maybe use for state machine for differen power mode
- USHORT usVoltageLevel; // real voltage level
-}SET_VOLTAGE_PARAMETERS_V2;
-
-typedef struct _SET_VOLTAGE_PS_ALLOCATION
-{
- SET_VOLTAGE_PARAMETERS sASICSetVoltage;
- WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved;
-}SET_VOLTAGE_PS_ALLOCATION;
-
-/****************************************************************************/
-// Structures used by TVEncoderControlTable
-/****************************************************************************/
-typedef struct _TV_ENCODER_CONTROL_PARAMETERS
-{
- USHORT usPixelClock; // in 10KHz; for bios convenient
- UCHAR ucTvStandard; // See definition "ATOM_TV_NTSC ..."
- UCHAR ucAction; // 0: turn off encoder
- // 1: setup and turn on encoder
-}TV_ENCODER_CONTROL_PARAMETERS;
-
-typedef struct _TV_ENCODER_CONTROL_PS_ALLOCATION
-{
- TV_ENCODER_CONTROL_PARAMETERS sTVEncoder;
- WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved; // Don't set this one
-}TV_ENCODER_CONTROL_PS_ALLOCATION;
-
-//==============================Data Table Portion====================================
-
-#ifdef UEFI_BUILD
- #define UTEMP USHORT
- #define USHORT void*
-#endif
-
-/****************************************************************************/
-// Structure used in Data.mtb
-/****************************************************************************/
-typedef struct _ATOM_MASTER_LIST_OF_DATA_TABLES
-{
- USHORT UtilityPipeLine; // Offest for the utility to get parser info,Don't change this position!
- USHORT MultimediaCapabilityInfo; // Only used by MM Lib,latest version 1.1, not configuable from Bios, need to include the table to build Bios
- USHORT MultimediaConfigInfo; // Only used by MM Lib,latest version 2.1, not configuable from Bios, need to include the table to build Bios
- USHORT StandardVESA_Timing; // Only used by Bios
- USHORT FirmwareInfo; // Shared by various SW components,latest version 1.4
- USHORT DAC_Info; // Will be obsolete from R600
- USHORT LVDS_Info; // Shared by various SW components,latest version 1.1
- USHORT TMDS_Info; // Will be obsolete from R600
- USHORT AnalogTV_Info; // Shared by various SW components,latest version 1.1
- USHORT SupportedDevicesInfo; // Will be obsolete from R600
- USHORT GPIO_I2C_Info; // Shared by various SW components,latest version 1.2 will be used from R600
- USHORT VRAM_UsageByFirmware; // Shared by various SW components,latest version 1.3 will be used from R600
- USHORT GPIO_Pin_LUT; // Shared by various SW components,latest version 1.1
- USHORT VESA_ToInternalModeLUT; // Only used by Bios
- USHORT ComponentVideoInfo; // Shared by various SW components,latest version 2.1 will be used from R600
- USHORT PowerPlayInfo; // Shared by various SW components,latest version 2.1,new design from R600
- USHORT CompassionateData; // Will be obsolete from R600
- USHORT SaveRestoreInfo; // Only used by Bios
- USHORT PPLL_SS_Info; // Shared by various SW components,latest version 1.2, used to call SS_Info, change to new name because of int ASIC SS info
- USHORT OemInfo; // Defined and used by external SW, should be obsolete soon
- USHORT XTMDS_Info; // Will be obsolete from R600
- USHORT MclkSS_Info; // Shared by various SW components,latest version 1.1, only enabled when ext SS chip is used
- USHORT Object_Header; // Shared by various SW components,latest version 1.1
- USHORT IndirectIOAccess; // Only used by Bios,this table position can't change at all!!
- USHORT MC_InitParameter; // Only used by command table
- USHORT ASIC_VDDC_Info; // Will be obsolete from R600
- USHORT ASIC_InternalSS_Info; // New tabel name from R600, used to be called "ASIC_MVDDC_Info"
- USHORT TV_VideoMode; // Only used by command table
- USHORT VRAM_Info; // Only used by command table, latest version 1.3
- USHORT MemoryTrainingInfo; // Used for VBIOS and Diag utility for memory training purpose since R600. the new table rev start from 2.1
- USHORT IntegratedSystemInfo; // Shared by various SW components
- USHORT ASIC_ProfilingInfo; // New table name from R600, used to be called "ASIC_VDDCI_Info" for pre-R600
- USHORT VoltageObjectInfo; // Shared by various SW components, latest version 1.1
- USHORT PowerSourceInfo; // Shared by various SW components, latest versoin 1.1
-}ATOM_MASTER_LIST_OF_DATA_TABLES;
-
-#ifdef UEFI_BUILD
- #define USHORT UTEMP
-#endif
-
-typedef struct _ATOM_MASTER_DATA_TABLE
-{
- ATOM_COMMON_TABLE_HEADER sHeader;
- ATOM_MASTER_LIST_OF_DATA_TABLES ListOfDataTables;
-}ATOM_MASTER_DATA_TABLE;
-
-/****************************************************************************/
-// Structure used in MultimediaCapabilityInfoTable
-/****************************************************************************/
-typedef struct _ATOM_MULTIMEDIA_CAPABILITY_INFO
-{
- ATOM_COMMON_TABLE_HEADER sHeader;
- ULONG ulSignature; // HW info table signature string "$ATI"
- UCHAR ucI2C_Type; // I2C type (normal GP_IO, ImpactTV GP_IO, Dedicated I2C pin, etc)
- UCHAR ucTV_OutInfo; // Type of TV out supported (3:0) and video out crystal frequency (6:4) and TV data port (7)
- UCHAR ucVideoPortInfo; // Provides the video port capabilities
- UCHAR ucHostPortInfo; // Provides host port configuration information
-}ATOM_MULTIMEDIA_CAPABILITY_INFO;
-
-/****************************************************************************/
-// Structure used in MultimediaConfigInfoTable
-/****************************************************************************/
-typedef struct _ATOM_MULTIMEDIA_CONFIG_INFO
-{
- ATOM_COMMON_TABLE_HEADER sHeader;
- ULONG ulSignature; // MM info table signature sting "$MMT"
- UCHAR ucTunerInfo; // Type of tuner installed on the adapter (4:0) and video input for tuner (7:5)
- UCHAR ucAudioChipInfo; // List the audio chip type (3:0) product type (4) and OEM revision (7:5)
- UCHAR ucProductID; // Defines as OEM ID or ATI board ID dependent on product type setting
- UCHAR ucMiscInfo1; // Tuner voltage (1:0) HW teletext support (3:2) FM audio decoder (5:4) reserved (6) audio scrambling (7)
- UCHAR ucMiscInfo2; // I2S input config (0) I2S output config (1) I2S Audio Chip (4:2) SPDIF Output Config (5) reserved (7:6)
- UCHAR ucMiscInfo3; // Video Decoder Type (3:0) Video In Standard/Crystal (7:4)
- UCHAR ucMiscInfo4; // Video Decoder Host Config (2:0) reserved (7:3)
- UCHAR ucVideoInput0Info;// Video Input 0 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6)
- UCHAR ucVideoInput1Info;// Video Input 1 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6)
- UCHAR ucVideoInput2Info;// Video Input 2 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6)
- UCHAR ucVideoInput3Info;// Video Input 3 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6)
- UCHAR ucVideoInput4Info;// Video Input 4 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6)
-}ATOM_MULTIMEDIA_CONFIG_INFO;
-
-/****************************************************************************/
-// Structures used in FirmwareInfoTable
-/****************************************************************************/
-
-// usBIOSCapability Defintion:
-// Bit 0 = 0: Bios image is not Posted, =1:Bios image is Posted;
-// Bit 1 = 0: Dual CRTC is not supported, =1: Dual CRTC is supported;
-// Bit 2 = 0: Extended Desktop is not supported, =1: Extended Desktop is supported;
-// Others: Reserved
-#define ATOM_BIOS_INFO_ATOM_FIRMWARE_POSTED 0x0001
-#define ATOM_BIOS_INFO_DUAL_CRTC_SUPPORT 0x0002
-#define ATOM_BIOS_INFO_EXTENDED_DESKTOP_SUPPORT 0x0004
-#define ATOM_BIOS_INFO_MEMORY_CLOCK_SS_SUPPORT 0x0008
-#define ATOM_BIOS_INFO_ENGINE_CLOCK_SS_SUPPORT 0x0010
-#define ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU 0x0020
-#define ATOM_BIOS_INFO_WMI_SUPPORT 0x0040
-#define ATOM_BIOS_INFO_PPMODE_ASSIGNGED_BY_SYSTEM 0x0080
-#define ATOM_BIOS_INFO_HYPERMEMORY_SUPPORT 0x0100
-#define ATOM_BIOS_INFO_HYPERMEMORY_SIZE_MASK 0x1E00
-#define ATOM_BIOS_INFO_VPOST_WITHOUT_FIRST_MODE_SET 0x2000
-#define ATOM_BIOS_INFO_BIOS_SCRATCH6_SCL2_REDEFINE 0x4000
-
-
-#ifndef _H2INC
-
-//Please don't add or expand this bitfield structure below, this one will retire soon.!
-typedef struct _ATOM_FIRMWARE_CAPABILITY
-{
-#if ATOM_BIG_ENDIAN
- USHORT Reserved:3;
- USHORT HyperMemory_Size:4;
- USHORT HyperMemory_Support:1;
- USHORT PPMode_Assigned:1;
- USHORT WMI_SUPPORT:1;
- USHORT GPUControlsBL:1;
- USHORT EngineClockSS_Support:1;
- USHORT MemoryClockSS_Support:1;
- USHORT ExtendedDesktopSupport:1;
- USHORT DualCRTC_Support:1;
- USHORT FirmwarePosted:1;
-#else
- USHORT FirmwarePosted:1;
- USHORT DualCRTC_Support:1;
- USHORT ExtendedDesktopSupport:1;
- USHORT MemoryClockSS_Support:1;
- USHORT EngineClockSS_Support:1;
- USHORT GPUControlsBL:1;
- USHORT WMI_SUPPORT:1;
- USHORT PPMode_Assigned:1;
- USHORT HyperMemory_Support:1;
- USHORT HyperMemory_Size:4;
- USHORT Reserved:3;
-#endif
-}ATOM_FIRMWARE_CAPABILITY;
-
-typedef union _ATOM_FIRMWARE_CAPABILITY_ACCESS
-{
- ATOM_FIRMWARE_CAPABILITY sbfAccess;
- USHORT susAccess;
-}ATOM_FIRMWARE_CAPABILITY_ACCESS;
-
-#else
-
-typedef union _ATOM_FIRMWARE_CAPABILITY_ACCESS
-{
- USHORT susAccess;
-}ATOM_FIRMWARE_CAPABILITY_ACCESS;
-
-#endif
-
-typedef struct _ATOM_FIRMWARE_INFO
-{
- ATOM_COMMON_TABLE_HEADER sHeader;
- ULONG ulFirmwareRevision;
- ULONG ulDefaultEngineClock; //In 10Khz unit
- ULONG ulDefaultMemoryClock; //In 10Khz unit
- ULONG ulDriverTargetEngineClock; //In 10Khz unit
- ULONG ulDriverTargetMemoryClock; //In 10Khz unit
- ULONG ulMaxEngineClockPLL_Output; //In 10Khz unit
- ULONG ulMaxMemoryClockPLL_Output; //In 10Khz unit
- ULONG ulMaxPixelClockPLL_Output; //In 10Khz unit
- ULONG ulASICMaxEngineClock; //In 10Khz unit
- ULONG ulASICMaxMemoryClock; //In 10Khz unit
- UCHAR ucASICMaxTemperature;
- UCHAR ucPadding[3]; //Don't use them
- ULONG aulReservedForBIOS[3]; //Don't use them
- USHORT usMinEngineClockPLL_Input; //In 10Khz unit
- USHORT usMaxEngineClockPLL_Input; //In 10Khz unit
- USHORT usMinEngineClockPLL_Output; //In 10Khz unit
- USHORT usMinMemoryClockPLL_Input; //In 10Khz unit
- USHORT usMaxMemoryClockPLL_Input; //In 10Khz unit
- USHORT usMinMemoryClockPLL_Output; //In 10Khz unit
- USHORT usMaxPixelClock; //In 10Khz unit, Max. Pclk
- USHORT usMinPixelClockPLL_Input; //In 10Khz unit
- USHORT usMaxPixelClockPLL_Input; //In 10Khz unit
- USHORT usMinPixelClockPLL_Output; //In 10Khz unit, the definitions above can't change!!!
- ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability;
- USHORT usReferenceClock; //In 10Khz unit
- USHORT usPM_RTS_Location; //RTS PM4 starting location in ROM in 1Kb unit
- UCHAR ucPM_RTS_StreamSize; //RTS PM4 packets in Kb unit
- UCHAR ucDesign_ID; //Indicate what is the board design
- UCHAR ucMemoryModule_ID; //Indicate what is the board design
-}ATOM_FIRMWARE_INFO;
-
-typedef struct _ATOM_FIRMWARE_INFO_V1_2
-{
- ATOM_COMMON_TABLE_HEADER sHeader;
- ULONG ulFirmwareRevision;
- ULONG ulDefaultEngineClock; //In 10Khz unit
- ULONG ulDefaultMemoryClock; //In 10Khz unit
- ULONG ulDriverTargetEngineClock; //In 10Khz unit
- ULONG ulDriverTargetMemoryClock; //In 10Khz unit
- ULONG ulMaxEngineClockPLL_Output; //In 10Khz unit
- ULONG ulMaxMemoryClockPLL_Output; //In 10Khz unit
- ULONG ulMaxPixelClockPLL_Output; //In 10Khz unit
- ULONG ulASICMaxEngineClock; //In 10Khz unit
- ULONG ulASICMaxMemoryClock; //In 10Khz unit
- UCHAR ucASICMaxTemperature;
- UCHAR ucMinAllowedBL_Level;
- UCHAR ucPadding[2]; //Don't use them
- ULONG aulReservedForBIOS[2]; //Don't use them
- ULONG ulMinPixelClockPLL_Output; //In 10Khz unit
- USHORT usMinEngineClockPLL_Input; //In 10Khz unit
- USHORT usMaxEngineClockPLL_Input; //In 10Khz unit
- USHORT usMinEngineClockPLL_Output; //In 10Khz unit
- USHORT usMinMemoryClockPLL_Input; //In 10Khz unit
- USHORT usMaxMemoryClockPLL_Input; //In 10Khz unit
- USHORT usMinMemoryClockPLL_Output; //In 10Khz unit
- USHORT usMaxPixelClock; //In 10Khz unit, Max. Pclk
- USHORT usMinPixelClockPLL_Input; //In 10Khz unit
- USHORT usMaxPixelClockPLL_Input; //In 10Khz unit
- USHORT usMinPixelClockPLL_Output; //In 10Khz unit - lower 16bit of ulMinPixelClockPLL_Output
- ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability;
- USHORT usReferenceClock; //In 10Khz unit
- USHORT usPM_RTS_Location; //RTS PM4 starting location in ROM in 1Kb unit
- UCHAR ucPM_RTS_StreamSize; //RTS PM4 packets in Kb unit
- UCHAR ucDesign_ID; //Indicate what is the board design
- UCHAR ucMemoryModule_ID; //Indicate what is the board design
-}ATOM_FIRMWARE_INFO_V1_2;
-
-typedef struct _ATOM_FIRMWARE_INFO_V1_3
-{
- ATOM_COMMON_TABLE_HEADER sHeader;
- ULONG ulFirmwareRevision;
- ULONG ulDefaultEngineClock; //In 10Khz unit
- ULONG ulDefaultMemoryClock; //In 10Khz unit
- ULONG ulDriverTargetEngineClock; //In 10Khz unit
- ULONG ulDriverTargetMemoryClock; //In 10Khz unit
- ULONG ulMaxEngineClockPLL_Output; //In 10Khz unit
- ULONG ulMaxMemoryClockPLL_Output; //In 10Khz unit
- ULONG ulMaxPixelClockPLL_Output; //In 10Khz unit
- ULONG ulASICMaxEngineClock; //In 10Khz unit
- ULONG ulASICMaxMemoryClock; //In 10Khz unit
- UCHAR ucASICMaxTemperature;
- UCHAR ucMinAllowedBL_Level;
- UCHAR ucPadding[2]; //Don't use them
- ULONG aulReservedForBIOS; //Don't use them
- ULONG ul3DAccelerationEngineClock;//In 10Khz unit
- ULONG ulMinPixelClockPLL_Output; //In 10Khz unit
- USHORT usMinEngineClockPLL_Input; //In 10Khz unit
- USHORT usMaxEngineClockPLL_Input; //In 10Khz unit
- USHORT usMinEngineClockPLL_Output; //In 10Khz unit
- USHORT usMinMemoryClockPLL_Input; //In 10Khz unit
- USHORT usMaxMemoryClockPLL_Input; //In 10Khz unit
- USHORT usMinMemoryClockPLL_Output; //In 10Khz unit
- USHORT usMaxPixelClock; //In 10Khz unit, Max. Pclk
- USHORT usMinPixelClockPLL_Input; //In 10Khz unit
- USHORT usMaxPixelClockPLL_Input; //In 10Khz unit
- USHORT usMinPixelClockPLL_Output; //In 10Khz unit - lower 16bit of ulMinPixelClockPLL_Output
- ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability;
- USHORT usReferenceClock; //In 10Khz unit
- USHORT usPM_RTS_Location; //RTS PM4 starting location in ROM in 1Kb unit
- UCHAR ucPM_RTS_StreamSize; //RTS PM4 packets in Kb unit
- UCHAR ucDesign_ID; //Indicate what is the board design
- UCHAR ucMemoryModule_ID; //Indicate what is the board design
-}ATOM_FIRMWARE_INFO_V1_3;
-
-typedef struct _ATOM_FIRMWARE_INFO_V1_4
-{
- ATOM_COMMON_TABLE_HEADER sHeader;
- ULONG ulFirmwareRevision;
- ULONG ulDefaultEngineClock; //In 10Khz unit
- ULONG ulDefaultMemoryClock; //In 10Khz unit
- ULONG ulDriverTargetEngineClock; //In 10Khz unit
- ULONG ulDriverTargetMemoryClock; //In 10Khz unit
- ULONG ulMaxEngineClockPLL_Output; //In 10Khz unit
- ULONG ulMaxMemoryClockPLL_Output; //In 10Khz unit
- ULONG ulMaxPixelClockPLL_Output; //In 10Khz unit
- ULONG ulASICMaxEngineClock; //In 10Khz unit
- ULONG ulASICMaxMemoryClock; //In 10Khz unit
- UCHAR ucASICMaxTemperature;
- UCHAR ucMinAllowedBL_Level;
- USHORT usBootUpVDDCVoltage; //In MV unit
- USHORT usLcdMinPixelClockPLL_Output; // In MHz unit
- USHORT usLcdMaxPixelClockPLL_Output; // In MHz unit
- ULONG ul3DAccelerationEngineClock;//In 10Khz unit
- ULONG ulMinPixelClockPLL_Output; //In 10Khz unit
- USHORT usMinEngineClockPLL_Input; //In 10Khz unit
- USHORT usMaxEngineClockPLL_Input; //In 10Khz unit
- USHORT usMinEngineClockPLL_Output; //In 10Khz unit
- USHORT usMinMemoryClockPLL_Input; //In 10Khz unit
- USHORT usMaxMemoryClockPLL_Input; //In 10Khz unit
- USHORT usMinMemoryClockPLL_Output; //In 10Khz unit
- USHORT usMaxPixelClock; //In 10Khz unit, Max. Pclk
- USHORT usMinPixelClockPLL_Input; //In 10Khz unit
- USHORT usMaxPixelClockPLL_Input; //In 10Khz unit
- USHORT usMinPixelClockPLL_Output; //In 10Khz unit - lower 16bit of ulMinPixelClockPLL_Output
- ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability;
- USHORT usReferenceClock; //In 10Khz unit
- USHORT usPM_RTS_Location; //RTS PM4 starting location in ROM in 1Kb unit
- UCHAR ucPM_RTS_StreamSize; //RTS PM4 packets in Kb unit
- UCHAR ucDesign_ID; //Indicate what is the board design
- UCHAR ucMemoryModule_ID; //Indicate what is the board design
-}ATOM_FIRMWARE_INFO_V1_4;
-
-#define ATOM_FIRMWARE_INFO_LAST ATOM_FIRMWARE_INFO_V1_4
-
-/****************************************************************************/
-// Structures used in IntegratedSystemInfoTable
-/****************************************************************************/
-#define IGP_CAP_FLAG_DYNAMIC_CLOCK_EN 0x2
-#define IGP_CAP_FLAG_AC_CARD 0x4
-#define IGP_CAP_FLAG_SDVO_CARD 0x8
-#define IGP_CAP_FLAG_POSTDIV_BY_2_MODE 0x10
-
-typedef struct _ATOM_INTEGRATED_SYSTEM_INFO
-{
- ATOM_COMMON_TABLE_HEADER sHeader;
- ULONG ulBootUpEngineClock; //in 10kHz unit
- ULONG ulBootUpMemoryClock; //in 10kHz unit
- ULONG ulMaxSystemMemoryClock; //in 10kHz unit
- ULONG ulMinSystemMemoryClock; //in 10kHz unit
- UCHAR ucNumberOfCyclesInPeriodHi;
- UCHAR ucLCDTimingSel; //=0:not valid.!=0 sel this timing descriptor from LCD EDID.
- USHORT usReserved1;
- USHORT usInterNBVoltageLow; //An intermidiate PMW value to set the voltage
- USHORT usInterNBVoltageHigh; //Another intermidiate PMW value to set the voltage
- ULONG ulReserved[2];
-
- USHORT usFSBClock; //In MHz unit
- USHORT usCapabilityFlag; //Bit0=1 indicates the fake HDMI support,Bit1=0/1 for Dynamic clocking dis/enable
- //Bit[3:2]== 0:No PCIE card, 1:AC card, 2:SDVO card
- //Bit[4]==1: P/2 mode, ==0: P/1 mode
- USHORT usPCIENBCfgReg7; //bit[7:0]=MUX_Sel, bit[9:8]=MUX_SEL_LEVEL2, bit[10]=Lane_Reversal
- USHORT usK8MemoryClock; //in MHz unit
- USHORT usK8SyncStartDelay; //in 0.01 us unit
- USHORT usK8DataReturnTime; //in 0.01 us unit
- UCHAR ucMaxNBVoltage;
- UCHAR ucMinNBVoltage;
- UCHAR ucMemoryType; //[7:4]=1:DDR1;=2:DDR2;=3:DDR3.[3:0] is reserved
- UCHAR ucNumberOfCyclesInPeriod; //CG.FVTHROT_PWM_CTRL_REG0.NumberOfCyclesInPeriod
- UCHAR ucStartingPWM_HighTime; //CG.FVTHROT_PWM_CTRL_REG0.StartingPWM_HighTime
- UCHAR ucHTLinkWidth; //16 bit vs. 8 bit
- UCHAR ucMaxNBVoltageHigh;
- UCHAR ucMinNBVoltageHigh;
-}ATOM_INTEGRATED_SYSTEM_INFO;
-
-/* Explanation on entries in ATOM_INTEGRATED_SYSTEM_INFO
-ulBootUpMemoryClock: For Intel IGP,it's the UMA system memory clock
- For AMD IGP,it's 0 if no SidePort memory installed or it's the boot-up SidePort memory clock
-ulMaxSystemMemoryClock: For Intel IGP,it's the Max freq from memory SPD if memory runs in ASYNC mode or otherwise (SYNC mode) it's 0
- For AMD IGP,for now this can be 0
-ulMinSystemMemoryClock: For Intel IGP,it's 133MHz if memory runs in ASYNC mode or otherwise (SYNC mode) it's 0
- For AMD IGP,for now this can be 0
-
-usFSBClock: For Intel IGP,it's FSB Freq
- For AMD IGP,it's HT Link Speed
-
-usK8MemoryClock: For AMD IGP only. For RevF CPU, set it to 200
-usK8SyncStartDelay: For AMD IGP only. Memory access latency in K8, required for watermark calculation
-usK8DataReturnTime: For AMD IGP only. Memory access latency in K8, required for watermark calculation
-
-VC:Voltage Control
-ucMaxNBVoltage: Voltage regulator dependent PWM value. Low 8 bits of the value for the max voltage.Set this one to 0xFF if VC without PWM. Set this to 0x0 if no VC at all.
-ucMinNBVoltage: Voltage regulator dependent PWM value. Low 8 bits of the value for the min voltage.Set this one to 0x00 if VC without PWM or no VC at all.
-
-ucNumberOfCyclesInPeriod: Indicate how many cycles when PWM duty is 100%. low 8 bits of the value.
-ucNumberOfCyclesInPeriodHi: Indicate how many cycles when PWM duty is 100%. high 8 bits of the value.If the PWM has an inverter,set bit [7]==1,otherwise set it 0
-
-ucMaxNBVoltageHigh: Voltage regulator dependent PWM value. High 8 bits of the value for the max voltage.Set this one to 0xFF if VC without PWM. Set this to 0x0 if no VC at all.
-ucMinNBVoltageHigh: Voltage regulator dependent PWM value. High 8 bits of the value for the min voltage.Set this one to 0x00 if VC without PWM or no VC at all.
-
-
-usInterNBVoltageLow: Voltage regulator dependent PWM value. The value makes the the voltage >=Min NB voltage but <=InterNBVoltageHigh. Set this to 0x0000 if VC without PWM or no VC at all.
-usInterNBVoltageHigh: Voltage regulator dependent PWM value. The value makes the the voltage >=InterNBVoltageLow but <=Max NB voltage.Set this to 0x0000 if VC without PWM or no VC at all.
-*/
-
-
-/*
-The following IGP table is introduced from RS780, which is supposed to be put by SBIOS in FB before IGP VBIOS starts VPOST;
-Then VBIOS will copy the whole structure to its image so all GPU SW components can access this data structure to get whatever they need.
-The enough reservation should allow us to never change table revisions. Whenever needed, a GPU SW component can use reserved portion for new data entries.
-
-SW components can access the IGP system infor structure in the same way as before
-*/
-
-
-typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V2
-{
- ATOM_COMMON_TABLE_HEADER sHeader;
- ULONG ulBootUpEngineClock; //in 10kHz unit
- ULONG ulReserved1[2]; //must be 0x0 for the reserved
- ULONG ulBootUpUMAClock; //in 10kHz unit
- ULONG ulBootUpSidePortClock; //in 10kHz unit
- ULONG ulMinSidePortClock; //in 10kHz unit
- ULONG ulReserved2[6]; //must be 0x0 for the reserved
- ULONG ulSystemConfig; //see explanation below
- ULONG ulBootUpReqDisplayVector;
- ULONG ulOtherDisplayMisc;
- ULONG ulDDISlot1Config;
- ULONG ulDDISlot2Config;
- UCHAR ucMemoryType; //[3:0]=1:DDR1;=2:DDR2;=3:DDR3.[7:4] is reserved
- UCHAR ucUMAChannelNumber;
- UCHAR ucDockingPinBit;
- UCHAR ucDockingPinPolarity;
- ULONG ulDockingPinCFGInfo;
- ULONG ulCPUCapInfo;
- USHORT usNumberOfCyclesInPeriod;
- USHORT usMaxNBVoltage;
- USHORT usMinNBVoltage;
- USHORT usBootUpNBVoltage;
- ULONG ulHTLinkFreq; //in 10Khz
- USHORT usMinHTLinkWidth;
- USHORT usMaxHTLinkWidth;
- USHORT usUMASyncStartDelay;
- USHORT usUMADataReturnTime;
- USHORT usLinkStatusZeroTime;
- USHORT usReserved;
- ULONG ulHighVoltageHTLinkFreq; // in 10Khz
- ULONG ulLowVoltageHTLinkFreq; // in 10Khz
- USHORT usMaxUpStreamHTLinkWidth;
- USHORT usMaxDownStreamHTLinkWidth;
- USHORT usMinUpStreamHTLinkWidth;
- USHORT usMinDownStreamHTLinkWidth;
- ULONG ulReserved3[97]; //must be 0x0
-}ATOM_INTEGRATED_SYSTEM_INFO_V2;
-
-/*
-ulBootUpEngineClock: Boot-up Engine Clock in 10Khz;
-ulBootUpUMAClock: Boot-up UMA Clock in 10Khz; it must be 0x0 when UMA is not present
-ulBootUpSidePortClock: Boot-up SidePort Clock in 10Khz; it must be 0x0 when SidePort Memory is not present,this could be equal to or less than maximum supported Sideport memory clock
-
-ulSystemConfig:
-Bit[0]=1: PowerExpress mode =0 Non-PowerExpress mode;
-Bit[1]=1: system boots up at AMD overdrived state or user customized mode. In this case, driver will just stick to this boot-up mode. No other PowerPlay state
- =0: system boots up at driver control state. Power state depends on PowerPlay table.
-Bit[2]=1: PWM method is used on NB voltage control. =0: GPIO method is used.
-Bit[3]=1: Only one power state(Performance) will be supported.
- =0: Multiple power states supported from PowerPlay table.
-Bit[4]=1: CLMC is supported and enabled on current system.
- =0: CLMC is not supported or enabled on current system. SBIOS need to support HT link/freq change through ATIF interface.
-Bit[5]=1: Enable CDLW for all driver control power states. Max HT width is from SBIOS, while Min HT width is determined by display requirement.
- =0: CDLW is disabled. If CLMC is enabled case, Min HT width will be set equal to Max HT width. If CLMC disabled case, Max HT width will be applied.
-Bit[6]=1: High Voltage requested for all power states. In this case, voltage will be forced at 1.1v and powerplay table voltage drop/throttling request will be ignored.
- =0: Voltage settings is determined by powerplay table.
-Bit[7]=1: Enable CLMC as hybrid Mode. CDLD and CILR will be disabled in this case and we're using legacy C1E. This is workaround for CPU(Griffin) performance issue.
- =0: Enable CLMC as regular mode, CDLD and CILR will be enabled.
-
-ulBootUpReqDisplayVector: This dword is a bit vector indicates what display devices are requested during boot-up. Refer to ATOM_DEVICE_xxx_SUPPORT for the bit vector definitions.
-
-ulOtherDisplayMisc: [15:8]- Bootup LCD Expansion selection; 0-center, 1-full panel size expansion;
- [7:0] - BootupTV standard selection; This is a bit vector to indicate what TV standards are supported by the system. Refer to ucTVSuppportedStd definition;
-
-ulDDISlot1Config: Describes the PCIE lane configuration on this DDI PCIE slot (ADD2 card) or connector (Mobile design).
- [3:0] - Bit vector to indicate PCIE lane config of the DDI slot/connector on chassis (bit 0=1 lane 3:0; bit 1=1 lane 7:4; bit 2=1 lane 11:8; bit 3=1 lane 15:12)
- [7:4] - Bit vector to indicate PCIE lane config of the same DDI slot/connector on docking station (bit 0=1 lane 3:0; bit 1=1 lane 7:4; bit 2=1 lane 11:8; bit 3=1 lane 15:12)
- [15:8] - Lane configuration attribute;
- [23:16]- Connector type, possible value:
- CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D
- CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D
- CONNECTOR_OBJECT_ID_HDMI_TYPE_A
- CONNECTOR_OBJECT_ID_DISPLAYPORT
- [31:24]- Reserved
-
-ulDDISlot2Config: Same as Slot1.
-ucMemoryType: SidePort memory type, set it to 0x0 when Sideport memory is not installed. Driver needs this info to change sideport memory clock. Not for display in CCC.
-For IGP, Hypermemory is the only memory type showed in CCC.
-
-ucUMAChannelNumber: how many channels for the UMA;
-
-ulDockingPinCFGInfo: [15:0]-Bus/Device/Function # to CFG to read this Docking Pin; [31:16]-reg offset in CFG to read this pin
-ucDockingPinBit: which bit in this register to read the pin status;
-ucDockingPinPolarity:Polarity of the pin when docked;
-
-ulCPUCapInfo: [7:0]=1:Griffin;[7:0]=2:Greyhound;[7:0]=3:K8, other bits reserved for now and must be 0x0
-
-usNumberOfCyclesInPeriod:Indicate how many cycles when PWM duty is 100%.
-usMaxNBVoltage:Max. voltage control value in either PWM or GPIO mode.
-usMinNBVoltage:Min. voltage control value in either PWM or GPIO mode.
- GPIO mode: both usMaxNBVoltage & usMinNBVoltage have a valid value ulSystemConfig.SYSTEM_CONFIG_USE_PWM_ON_VOLTAGE=0
- PWM mode: both usMaxNBVoltage & usMinNBVoltage have a valid value ulSystemConfig.SYSTEM_CONFIG_USE_PWM_ON_VOLTAGE=1
- GPU SW don't control mode: usMaxNBVoltage & usMinNBVoltage=0 and no care about ulSystemConfig.SYSTEM_CONFIG_USE_PWM_ON_VOLTAGE
-usBootUpNBVoltage:Boot-up voltage regulator dependent PWM value.
-
-ulHTLinkFreq: Bootup HT link Frequency in 10Khz.
-usMinHTLinkWidth: Bootup minimum HT link width. If CDLW disabled, this is equal to usMaxHTLinkWidth.
- If CDLW enabled, both upstream and downstream width should be the same during bootup.
-usMaxHTLinkWidth: Bootup maximum HT link width. If CDLW disabled, this is equal to usMinHTLinkWidth.
- If CDLW enabled, both upstream and downstream width should be the same during bootup.
-
-usUMASyncStartDelay: Memory access latency, required for watermark calculation
-usUMADataReturnTime: Memory access latency, required for watermark calculation
-usLinkStatusZeroTime:Memory access latency required for watermark calculation, set this to 0x0 for K8 CPU, set a proper value in 0.01 the unit of us
-for Griffin or Greyhound. SBIOS needs to convert to actual time by:
- if T0Ttime [5:4]=00b, then usLinkStatusZeroTime=T0Ttime [3:0]*0.1us (0.0 to 1.5us)
- if T0Ttime [5:4]=01b, then usLinkStatusZeroTime=T0Ttime [3:0]*0.5us (0.0 to 7.5us)
- if T0Ttime [5:4]=10b, then usLinkStatusZeroTime=T0Ttime [3:0]*2.0us (0.0 to 30us)
- if T0Ttime [5:4]=11b, and T0Ttime [3:0]=0x0 to 0xa, then usLinkStatusZeroTime=T0Ttime [3:0]*20us (0.0 to 200us)
-
-ulHighVoltageHTLinkFreq: HT link frequency for power state with low voltage. If boot up runs in HT1, this must be 0.
- This must be less than or equal to ulHTLinkFreq(bootup frequency).
-ulLowVoltageHTLinkFreq: HT link frequency for power state with low voltage or voltage scaling 1.0v~1.1v. If boot up runs in HT1, this must be 0.
- This must be less than or equal to ulHighVoltageHTLinkFreq.
-
-usMaxUpStreamHTLinkWidth: Asymmetric link width support in the future, to replace usMaxHTLinkWidth. Not used for now.
-usMaxDownStreamHTLinkWidth: same as above.
-usMinUpStreamHTLinkWidth: Asymmetric link width support in the future, to replace usMinHTLinkWidth. Not used for now.
-usMinDownStreamHTLinkWidth: same as above.
-*/
-
-
-#define SYSTEM_CONFIG_POWEREXPRESS_ENABLE 0x00000001
-#define SYSTEM_CONFIG_RUN_AT_OVERDRIVE_ENGINE 0x00000002
-#define SYSTEM_CONFIG_USE_PWM_ON_VOLTAGE 0x00000004
-#define SYSTEM_CONFIG_PERFORMANCE_POWERSTATE_ONLY 0x00000008
-#define SYSTEM_CONFIG_CLMC_ENABLED 0x00000010
-#define SYSTEM_CONFIG_CDLW_ENABLED 0x00000020
-#define SYSTEM_CONFIG_HIGH_VOLTAGE_REQUESTED 0x00000040
-#define SYSTEM_CONFIG_CLMC_HYBRID_MODE_ENABLED 0x00000080
-
-#define IGP_DDI_SLOT_LANE_CONFIG_MASK 0x000000FF
-
-#define b0IGP_DDI_SLOT_LANE_MAP_MASK 0x0F
-#define b0IGP_DDI_SLOT_DOCKING_LANE_MAP_MASK 0xF0
-#define b0IGP_DDI_SLOT_CONFIG_LANE_0_3 0x01
-#define b0IGP_DDI_SLOT_CONFIG_LANE_4_7 0x02
-#define b0IGP_DDI_SLOT_CONFIG_LANE_8_11 0x04
-#define b0IGP_DDI_SLOT_CONFIG_LANE_12_15 0x08
-
-#define IGP_DDI_SLOT_ATTRIBUTE_MASK 0x0000FF00
-#define IGP_DDI_SLOT_CONFIG_REVERSED 0x00000100
-#define b1IGP_DDI_SLOT_CONFIG_REVERSED 0x01
-
-#define IGP_DDI_SLOT_CONNECTOR_TYPE_MASK 0x00FF0000
-
-#define ATOM_CRT_INT_ENCODER1_INDEX 0x00000000
-#define ATOM_LCD_INT_ENCODER1_INDEX 0x00000001
-#define ATOM_TV_INT_ENCODER1_INDEX 0x00000002
-#define ATOM_DFP_INT_ENCODER1_INDEX 0x00000003
-#define ATOM_CRT_INT_ENCODER2_INDEX 0x00000004
-#define ATOM_LCD_EXT_ENCODER1_INDEX 0x00000005
-#define ATOM_TV_EXT_ENCODER1_INDEX 0x00000006
-#define ATOM_DFP_EXT_ENCODER1_INDEX 0x00000007
-#define ATOM_CV_INT_ENCODER1_INDEX 0x00000008
-#define ATOM_DFP_INT_ENCODER2_INDEX 0x00000009
-#define ATOM_CRT_EXT_ENCODER1_INDEX 0x0000000A
-#define ATOM_CV_EXT_ENCODER1_INDEX 0x0000000B
-#define ATOM_DFP_INT_ENCODER3_INDEX 0x0000000C
-#define ATOM_DFP_INT_ENCODER4_INDEX 0x0000000D
-
-// define ASIC internal encoder id ( bit vector )
-#define ASIC_INT_DAC1_ENCODER_ID 0x00
-#define ASIC_INT_TV_ENCODER_ID 0x02
-#define ASIC_INT_DIG1_ENCODER_ID 0x03
-#define ASIC_INT_DAC2_ENCODER_ID 0x04
-#define ASIC_EXT_TV_ENCODER_ID 0x06
-#define ASIC_INT_DVO_ENCODER_ID 0x07
-#define ASIC_INT_DIG2_ENCODER_ID 0x09
-#define ASIC_EXT_DIG_ENCODER_ID 0x05
-
-//define Encoder attribute
-#define ATOM_ANALOG_ENCODER 0
-#define ATOM_DIGITAL_ENCODER 1
-
-#define ATOM_DEVICE_CRT1_INDEX 0x00000000
-#define ATOM_DEVICE_LCD1_INDEX 0x00000001
-#define ATOM_DEVICE_TV1_INDEX 0x00000002
-#define ATOM_DEVICE_DFP1_INDEX 0x00000003
-#define ATOM_DEVICE_CRT2_INDEX 0x00000004
-#define ATOM_DEVICE_LCD2_INDEX 0x00000005
-#define ATOM_DEVICE_TV2_INDEX 0x00000006
-#define ATOM_DEVICE_DFP2_INDEX 0x00000007
-#define ATOM_DEVICE_CV_INDEX 0x00000008
-#define ATOM_DEVICE_DFP3_INDEX 0x00000009
-#define ATOM_DEVICE_DFP4_INDEX 0x0000000A
-#define ATOM_DEVICE_DFP5_INDEX 0x0000000B
-#define ATOM_DEVICE_RESERVEDC_INDEX 0x0000000C
-#define ATOM_DEVICE_RESERVEDD_INDEX 0x0000000D
-#define ATOM_DEVICE_RESERVEDE_INDEX 0x0000000E
-#define ATOM_DEVICE_RESERVEDF_INDEX 0x0000000F
-#define ATOM_MAX_SUPPORTED_DEVICE_INFO (ATOM_DEVICE_DFP3_INDEX+1)
-#define ATOM_MAX_SUPPORTED_DEVICE_INFO_2 ATOM_MAX_SUPPORTED_DEVICE_INFO
-#define ATOM_MAX_SUPPORTED_DEVICE_INFO_3 (ATOM_DEVICE_DFP5_INDEX + 1 )
-
-#define ATOM_MAX_SUPPORTED_DEVICE (ATOM_DEVICE_RESERVEDF_INDEX+1)
-
-#define ATOM_DEVICE_CRT1_SUPPORT (0x1L << ATOM_DEVICE_CRT1_INDEX )
-#define ATOM_DEVICE_LCD1_SUPPORT (0x1L << ATOM_DEVICE_LCD1_INDEX )
-#define ATOM_DEVICE_TV1_SUPPORT (0x1L << ATOM_DEVICE_TV1_INDEX )
-#define ATOM_DEVICE_DFP1_SUPPORT (0x1L << ATOM_DEVICE_DFP1_INDEX)
-#define ATOM_DEVICE_CRT2_SUPPORT (0x1L << ATOM_DEVICE_CRT2_INDEX )
-#define ATOM_DEVICE_LCD2_SUPPORT (0x1L << ATOM_DEVICE_LCD2_INDEX )
-#define ATOM_DEVICE_TV2_SUPPORT (0x1L << ATOM_DEVICE_TV2_INDEX )
-#define ATOM_DEVICE_DFP2_SUPPORT (0x1L << ATOM_DEVICE_DFP2_INDEX)
-#define ATOM_DEVICE_CV_SUPPORT (0x1L << ATOM_DEVICE_CV_INDEX )
-#define ATOM_DEVICE_DFP3_SUPPORT (0x1L << ATOM_DEVICE_DFP3_INDEX )
-#define ATOM_DEVICE_DFP4_SUPPORT (0x1L << ATOM_DEVICE_DFP4_INDEX )
-#define ATOM_DEVICE_DFP5_SUPPORT (0x1L << ATOM_DEVICE_DFP5_INDEX )
-
-#define ATOM_DEVICE_CRT_SUPPORT ATOM_DEVICE_CRT1_SUPPORT | ATOM_DEVICE_CRT2_SUPPORT
-#define ATOM_DEVICE_DFP_SUPPORT ATOM_DEVICE_DFP1_SUPPORT | ATOM_DEVICE_DFP2_SUPPORT | ATOM_DEVICE_DFP3_SUPPORT | ATOM_DEVICE_DFP4_SUPPORT | ATOM_DEVICE_DFP5_SUPPORT
-#define ATOM_DEVICE_TV_SUPPORT ATOM_DEVICE_TV1_SUPPORT | ATOM_DEVICE_TV2_SUPPORT
-#define ATOM_DEVICE_LCD_SUPPORT ATOM_DEVICE_LCD1_SUPPORT | ATOM_DEVICE_LCD2_SUPPORT
-
-#define ATOM_DEVICE_CONNECTOR_TYPE_MASK 0x000000F0
-#define ATOM_DEVICE_CONNECTOR_TYPE_SHIFT 0x00000004
-#define ATOM_DEVICE_CONNECTOR_VGA 0x00000001
-#define ATOM_DEVICE_CONNECTOR_DVI_I 0x00000002
-#define ATOM_DEVICE_CONNECTOR_DVI_D 0x00000003
-#define ATOM_DEVICE_CONNECTOR_DVI_A 0x00000004
-#define ATOM_DEVICE_CONNECTOR_SVIDEO 0x00000005
-#define ATOM_DEVICE_CONNECTOR_COMPOSITE 0x00000006
-#define ATOM_DEVICE_CONNECTOR_LVDS 0x00000007
-#define ATOM_DEVICE_CONNECTOR_DIGI_LINK 0x00000008
-#define ATOM_DEVICE_CONNECTOR_SCART 0x00000009
-#define ATOM_DEVICE_CONNECTOR_HDMI_TYPE_A 0x0000000A
-#define ATOM_DEVICE_CONNECTOR_HDMI_TYPE_B 0x0000000B
-#define ATOM_DEVICE_CONNECTOR_CASE_1 0x0000000E
-#define ATOM_DEVICE_CONNECTOR_DISPLAYPORT 0x0000000F
-
-
-#define ATOM_DEVICE_DAC_INFO_MASK 0x0000000F
-#define ATOM_DEVICE_DAC_INFO_SHIFT 0x00000000
-#define ATOM_DEVICE_DAC_INFO_NODAC 0x00000000
-#define ATOM_DEVICE_DAC_INFO_DACA 0x00000001
-#define ATOM_DEVICE_DAC_INFO_DACB 0x00000002
-#define ATOM_DEVICE_DAC_INFO_EXDAC 0x00000003
-
-#define ATOM_DEVICE_I2C_ID_NOI2C 0x00000000
-
-#define ATOM_DEVICE_I2C_LINEMUX_MASK 0x0000000F
-#define ATOM_DEVICE_I2C_LINEMUX_SHIFT 0x00000000
-
-#define ATOM_DEVICE_I2C_ID_MASK 0x00000070
-#define ATOM_DEVICE_I2C_ID_SHIFT 0x00000004
-#define ATOM_DEVICE_I2C_ID_IS_FOR_NON_MM_USE 0x00000001
-#define ATOM_DEVICE_I2C_ID_IS_FOR_MM_USE 0x00000002
-#define ATOM_DEVICE_I2C_ID_IS_FOR_SDVO_USE 0x00000003 //For IGP RS600
-#define ATOM_DEVICE_I2C_ID_IS_FOR_DAC_SCL 0x00000004 //For IGP RS690
-
-#define ATOM_DEVICE_I2C_HARDWARE_CAP_MASK 0x00000080
-#define ATOM_DEVICE_I2C_HARDWARE_CAP_SHIFT 0x00000007
-#define ATOM_DEVICE_USES_SOFTWARE_ASSISTED_I2C 0x00000000
-#define ATOM_DEVICE_USES_HARDWARE_ASSISTED_I2C 0x00000001
-
-// usDeviceSupport:
-// Bits0 = 0 - no CRT1 support= 1- CRT1 is supported
-// Bit 1 = 0 - no LCD1 support= 1- LCD1 is supported
-// Bit 2 = 0 - no TV1 support= 1- TV1 is supported
-// Bit 3 = 0 - no DFP1 support= 1- DFP1 is supported
-// Bit 4 = 0 - no CRT2 support= 1- CRT2 is supported
-// Bit 5 = 0 - no LCD2 support= 1- LCD2 is supported
-// Bit 6 = 0 - no TV2 support= 1- TV2 is supported
-// Bit 7 = 0 - no DFP2 support= 1- DFP2 is supported
-// Bit 8 = 0 - no CV support= 1- CV is supported
-// Bit 9 = 0 - no DFP3 support= 1- DFP3 is supported
-// Byte1 (Supported Device Info)
-// Bit 0 = = 0 - no CV support= 1- CV is supported
-//
-//
-
-// ucI2C_ConfigID
-// [7:0] - I2C LINE Associate ID
-// = 0 - no I2C
-// [7] - HW_Cap = 1, [6:0]=HW assisted I2C ID(HW line selection)
-// = 0, [6:0]=SW assisted I2C ID
-// [6-4] - HW_ENGINE_ID = 1, HW engine for NON multimedia use
-// = 2, HW engine for Multimedia use
-// = 3-7 Reserved for future I2C engines
-// [3-0] - I2C_LINE_MUX = A Mux number when it's HW assisted I2C or GPIO ID when it's SW I2C
-
-typedef struct _ATOM_I2C_ID_CONFIG
-{
-#if ATOM_BIG_ENDIAN
- UCHAR bfHW_Capable:1;
- UCHAR bfHW_EngineID:3;
- UCHAR bfI2C_LineMux:4;
-#else
- UCHAR bfI2C_LineMux:4;
- UCHAR bfHW_EngineID:3;
- UCHAR bfHW_Capable:1;
-#endif
-}ATOM_I2C_ID_CONFIG;
-
-typedef union _ATOM_I2C_ID_CONFIG_ACCESS
-{
- ATOM_I2C_ID_CONFIG sbfAccess;
- UCHAR ucAccess;
-}ATOM_I2C_ID_CONFIG_ACCESS;
-
-
-/****************************************************************************/
-// Structure used in GPIO_I2C_InfoTable
-/****************************************************************************/
-typedef struct _ATOM_GPIO_I2C_ASSIGMENT
-{
- USHORT usClkMaskRegisterIndex;
- USHORT usClkEnRegisterIndex;
- USHORT usClkY_RegisterIndex;
- USHORT usClkA_RegisterIndex;
- USHORT usDataMaskRegisterIndex;
- USHORT usDataEnRegisterIndex;
- USHORT usDataY_RegisterIndex;
- USHORT usDataA_RegisterIndex;
- ATOM_I2C_ID_CONFIG_ACCESS sucI2cId;
- UCHAR ucClkMaskShift;
- UCHAR ucClkEnShift;
- UCHAR ucClkY_Shift;
- UCHAR ucClkA_Shift;
- UCHAR ucDataMaskShift;
- UCHAR ucDataEnShift;
- UCHAR ucDataY_Shift;
- UCHAR ucDataA_Shift;
- UCHAR ucReserved1;
- UCHAR ucReserved2;
-}ATOM_GPIO_I2C_ASSIGMENT;
-
-typedef struct _ATOM_GPIO_I2C_INFO
-{
- ATOM_COMMON_TABLE_HEADER sHeader;
- ATOM_GPIO_I2C_ASSIGMENT asGPIO_Info[ATOM_MAX_SUPPORTED_DEVICE];
-}ATOM_GPIO_I2C_INFO;
-
-/****************************************************************************/
-// Common Structure used in other structures
-/****************************************************************************/
-
-#ifndef _H2INC
-
-//Please don't add or expand this bitfield structure below, this one will retire soon.!
-typedef struct _ATOM_MODE_MISC_INFO
-{
-#if ATOM_BIG_ENDIAN
- USHORT Reserved:6;
- USHORT RGB888:1;
- USHORT DoubleClock:1;
- USHORT Interlace:1;
- USHORT CompositeSync:1;
- USHORT V_ReplicationBy2:1;
- USHORT H_ReplicationBy2:1;
- USHORT VerticalCutOff:1;
- USHORT VSyncPolarity:1; //0=Active High, 1=Active Low
- USHORT HSyncPolarity:1; //0=Active High, 1=Active Low
- USHORT HorizontalCutOff:1;
-#else
- USHORT HorizontalCutOff:1;
- USHORT HSyncPolarity:1; //0=Active High, 1=Active Low
- USHORT VSyncPolarity:1; //0=Active High, 1=Active Low
- USHORT VerticalCutOff:1;
- USHORT H_ReplicationBy2:1;
- USHORT V_ReplicationBy2:1;
- USHORT CompositeSync:1;
- USHORT Interlace:1;
- USHORT DoubleClock:1;
- USHORT RGB888:1;
- USHORT Reserved:6;
-#endif
-}ATOM_MODE_MISC_INFO;
-
-typedef union _ATOM_MODE_MISC_INFO_ACCESS
-{
- ATOM_MODE_MISC_INFO sbfAccess;
- USHORT usAccess;
-}ATOM_MODE_MISC_INFO_ACCESS;
-
-#else
-
-typedef union _ATOM_MODE_MISC_INFO_ACCESS
-{
- USHORT usAccess;
-}ATOM_MODE_MISC_INFO_ACCESS;
-
-#endif
-
-// usModeMiscInfo-
-#define ATOM_H_CUTOFF 0x01
-#define ATOM_HSYNC_POLARITY 0x02 //0=Active High, 1=Active Low
-#define ATOM_VSYNC_POLARITY 0x04 //0=Active High, 1=Active Low
-#define ATOM_V_CUTOFF 0x08
-#define ATOM_H_REPLICATIONBY2 0x10
-#define ATOM_V_REPLICATIONBY2 0x20
-#define ATOM_COMPOSITESYNC 0x40
-#define ATOM_INTERLACE 0x80
-#define ATOM_DOUBLE_CLOCK_MODE 0x100
-#define ATOM_RGB888_MODE 0x200
-
-//usRefreshRate-
-#define ATOM_REFRESH_43 43
-#define ATOM_REFRESH_47 47
-#define ATOM_REFRESH_56 56
-#define ATOM_REFRESH_60 60
-#define ATOM_REFRESH_65 65
-#define ATOM_REFRESH_70 70
-#define ATOM_REFRESH_72 72
-#define ATOM_REFRESH_75 75
-#define ATOM_REFRESH_85 85
-
-// ATOM_MODE_TIMING data are exactly the same as VESA timing data.
-// Translation from EDID to ATOM_MODE_TIMING, use the following formula.
-//
-// VESA_HTOTAL = VESA_ACTIVE + 2* VESA_BORDER + VESA_BLANK
-// = EDID_HA + EDID_HBL
-// VESA_HDISP = VESA_ACTIVE = EDID_HA
-// VESA_HSYNC_START = VESA_ACTIVE + VESA_BORDER + VESA_FRONT_PORCH
-// = EDID_HA + EDID_HSO
-// VESA_HSYNC_WIDTH = VESA_HSYNC_TIME = EDID_HSPW
-// VESA_BORDER = EDID_BORDER
-
-/****************************************************************************/
-// Structure used in SetCRTC_UsingDTDTimingTable
-/****************************************************************************/
-typedef struct _SET_CRTC_USING_DTD_TIMING_PARAMETERS
-{
- USHORT usH_Size;
- USHORT usH_Blanking_Time;
- USHORT usV_Size;
- USHORT usV_Blanking_Time;
- USHORT usH_SyncOffset;
- USHORT usH_SyncWidth;
- USHORT usV_SyncOffset;
- USHORT usV_SyncWidth;
- ATOM_MODE_MISC_INFO_ACCESS susModeMiscInfo;
- UCHAR ucH_Border; // From DFP EDID
- UCHAR ucV_Border;
- UCHAR ucCRTC; // ATOM_CRTC1 or ATOM_CRTC2
- UCHAR ucPadding[3];
-}SET_CRTC_USING_DTD_TIMING_PARAMETERS;
-
-/****************************************************************************/
-// Structure used in SetCRTC_TimingTable
-/****************************************************************************/
-typedef struct _SET_CRTC_TIMING_PARAMETERS
-{
- USHORT usH_Total; // horizontal total
- USHORT usH_Disp; // horizontal display
- USHORT usH_SyncStart; // horozontal Sync start
- USHORT usH_SyncWidth; // horizontal Sync width
- USHORT usV_Total; // vertical total
- USHORT usV_Disp; // vertical display
- USHORT usV_SyncStart; // vertical Sync start
- USHORT usV_SyncWidth; // vertical Sync width
- ATOM_MODE_MISC_INFO_ACCESS susModeMiscInfo;
- UCHAR ucCRTC; // ATOM_CRTC1 or ATOM_CRTC2
- UCHAR ucOverscanRight; // right
- UCHAR ucOverscanLeft; // left
- UCHAR ucOverscanBottom; // bottom
- UCHAR ucOverscanTop; // top
- UCHAR ucReserved;
-}SET_CRTC_TIMING_PARAMETERS;
-#define SET_CRTC_TIMING_PARAMETERS_PS_ALLOCATION SET_CRTC_TIMING_PARAMETERS
-
-/****************************************************************************/
-// Structure used in StandardVESA_TimingTable
-// AnalogTV_InfoTable
-// ComponentVideoInfoTable
-/****************************************************************************/
-typedef struct _ATOM_MODE_TIMING
-{
- USHORT usCRTC_H_Total;
- USHORT usCRTC_H_Disp;
- USHORT usCRTC_H_SyncStart;
- USHORT usCRTC_H_SyncWidth;
- USHORT usCRTC_V_Total;
- USHORT usCRTC_V_Disp;
- USHORT usCRTC_V_SyncStart;
- USHORT usCRTC_V_SyncWidth;
- USHORT usPixelClock; //in 10Khz unit
- ATOM_MODE_MISC_INFO_ACCESS susModeMiscInfo;
- USHORT usCRTC_OverscanRight;
- USHORT usCRTC_OverscanLeft;
- USHORT usCRTC_OverscanBottom;
- USHORT usCRTC_OverscanTop;
- USHORT usReserve;
- UCHAR ucInternalModeNumber;
- UCHAR ucRefreshRate;
-}ATOM_MODE_TIMING;
-
-typedef struct _ATOM_DTD_FORMAT
-{
- USHORT usPixClk;
- USHORT usHActive;
- USHORT usHBlanking_Time;
- USHORT usVActive;
- USHORT usVBlanking_Time;
- USHORT usHSyncOffset;
- USHORT usHSyncWidth;
- USHORT usVSyncOffset;
- USHORT usVSyncWidth;
- USHORT usImageHSize;
- USHORT usImageVSize;
- UCHAR ucHBorder;
- UCHAR ucVBorder;
- ATOM_MODE_MISC_INFO_ACCESS susModeMiscInfo;
- UCHAR ucInternalModeNumber;
- UCHAR ucRefreshRate;
-}ATOM_DTD_FORMAT;
-
-/****************************************************************************/
-// Structure used in LVDS_InfoTable
-// * Need a document to describe this table
-/****************************************************************************/
-#define SUPPORTED_LCD_REFRESHRATE_30Hz 0x0004
-#define SUPPORTED_LCD_REFRESHRATE_40Hz 0x0008
-#define SUPPORTED_LCD_REFRESHRATE_50Hz 0x0010
-#define SUPPORTED_LCD_REFRESHRATE_60Hz 0x0020
-
-//Once DAL sees this CAP is set, it will read EDID from LCD on its own instead of using sLCDTiming in ATOM_LVDS_INFO_V12.
-//Other entries in ATOM_LVDS_INFO_V12 are still valid/useful to DAL
-#define LCDPANEL_CAP_READ_EDID 0x1
-
-//ucTableFormatRevision=1
-//ucTableContentRevision=1
-typedef struct _ATOM_LVDS_INFO
-{
- ATOM_COMMON_TABLE_HEADER sHeader;
- ATOM_DTD_FORMAT sLCDTiming;
- USHORT usModePatchTableOffset;
- USHORT usSupportedRefreshRate; //Refer to panel info table in ATOMBIOS extension Spec.
- USHORT usOffDelayInMs;
- UCHAR ucPowerSequenceDigOntoDEin10Ms;
- UCHAR ucPowerSequenceDEtoBLOnin10Ms;
- UCHAR ucLVDS_Misc; // Bit0:{=0:single, =1:dual},Bit1 {=0:666RGB, =1:888RGB},Bit2:3:{Grey level}
- // Bit4:{=0:LDI format for RGB888, =1 FPDI format for RGB888}
- // Bit5:{=0:Spatial Dithering disabled;1 Spatial Dithering enabled}
- // Bit6:{=0:Temporal Dithering disabled;1 Temporal Dithering enabled}
- UCHAR ucPanelDefaultRefreshRate;
- UCHAR ucPanelIdentification;
- UCHAR ucSS_Id;
-}ATOM_LVDS_INFO;
-
-//ucTableFormatRevision=1
-//ucTableContentRevision=2
-typedef struct _ATOM_LVDS_INFO_V12
-{
- ATOM_COMMON_TABLE_HEADER sHeader;
- ATOM_DTD_FORMAT sLCDTiming;
- USHORT usExtInfoTableOffset;
- USHORT usSupportedRefreshRate; //Refer to panel info table in ATOMBIOS extension Spec.
- USHORT usOffDelayInMs;
- UCHAR ucPowerSequenceDigOntoDEin10Ms;
- UCHAR ucPowerSequenceDEtoBLOnin10Ms;
- UCHAR ucLVDS_Misc; // Bit0:{=0:single, =1:dual},Bit1 {=0:666RGB, =1:888RGB},Bit2:3:{Grey level}
- // Bit4:{=0:LDI format for RGB888, =1 FPDI format for RGB888}
- // Bit5:{=0:Spatial Dithering disabled;1 Spatial Dithering enabled}
- // Bit6:{=0:Temporal Dithering disabled;1 Temporal Dithering enabled}
- UCHAR ucPanelDefaultRefreshRate;
- UCHAR ucPanelIdentification;
- UCHAR ucSS_Id;
- USHORT usLCDVenderID;
- USHORT usLCDProductID;
- UCHAR ucLCDPanel_SpecialHandlingCap;
- UCHAR ucPanelInfoSize; // start from ATOM_DTD_FORMAT to end of panel info, include ExtInfoTable
- UCHAR ucReserved[2];
-}ATOM_LVDS_INFO_V12;
-
-#define ATOM_LVDS_INFO_LAST ATOM_LVDS_INFO_V12
-
-typedef struct _ATOM_PATCH_RECORD_MODE
-{
- UCHAR ucRecordType;
- USHORT usHDisp;
- USHORT usVDisp;
-}ATOM_PATCH_RECORD_MODE;
-
-typedef struct _ATOM_LCD_RTS_RECORD
-{
- UCHAR ucRecordType;
- UCHAR ucRTSValue;
-}ATOM_LCD_RTS_RECORD;
-
-//!! If the record below exits, it shoud always be the first record for easy use in command table!!!
-typedef struct _ATOM_LCD_MODE_CONTROL_CAP
-{
- UCHAR ucRecordType;
- USHORT usLCDCap;
-}ATOM_LCD_MODE_CONTROL_CAP;
-
-#define LCD_MODE_CAP_BL_OFF 1
-#define LCD_MODE_CAP_CRTC_OFF 2
-#define LCD_MODE_CAP_PANEL_OFF 4
-
-typedef struct _ATOM_FAKE_EDID_PATCH_RECORD
-{
- UCHAR ucRecordType;
- UCHAR ucFakeEDIDLength;
- UCHAR ucFakeEDIDString[1]; // This actually has ucFakeEdidLength elements.
-} ATOM_FAKE_EDID_PATCH_RECORD;
-
-typedef struct _ATOM_PANEL_RESOLUTION_PATCH_RECORD
-{
- UCHAR ucRecordType;
- USHORT usHSize;
- USHORT usVSize;
-}ATOM_PANEL_RESOLUTION_PATCH_RECORD;
-
-#define LCD_MODE_PATCH_RECORD_MODE_TYPE 1
-#define LCD_RTS_RECORD_TYPE 2
-#define LCD_CAP_RECORD_TYPE 3
-#define LCD_FAKE_EDID_PATCH_RECORD_TYPE 4
-#define LCD_PANEL_RESOLUTION_RECORD_TYPE 5
-#define ATOM_RECORD_END_TYPE 0xFF
-
-/****************************Spread Spectrum Info Table Definitions **********************/
-
-//ucTableFormatRevision=1
-//ucTableContentRevision=2
-typedef struct _ATOM_SPREAD_SPECTRUM_ASSIGNMENT
-{
- USHORT usSpreadSpectrumPercentage;
- UCHAR ucSpreadSpectrumType; //Bit1=0 Down Spread,=1 Center Spread. Bit1=1 Ext. =0 Int. Others:TBD
- UCHAR ucSS_Step;
- UCHAR ucSS_Delay;
- UCHAR ucSS_Id;
- UCHAR ucRecommandedRef_Div;
- UCHAR ucSS_Range; //it was reserved for V11
-}ATOM_SPREAD_SPECTRUM_ASSIGNMENT;
-
-#define ATOM_MAX_SS_ENTRY 16
-#define ATOM_DP_SS_ID1 0x0f1 // SS modulation freq=30k
-#define ATOM_DP_SS_ID2 0x0f2 // SS modulation freq=33k
-
-
-#define ATOM_SS_DOWN_SPREAD_MODE_MASK 0x00000000
-#define ATOM_SS_DOWN_SPREAD_MODE 0x00000000
-#define ATOM_SS_CENTRE_SPREAD_MODE_MASK 0x00000001
-#define ATOM_SS_CENTRE_SPREAD_MODE 0x00000001
-#define ATOM_INTERNAL_SS_MASK 0x00000000
-#define ATOM_EXTERNAL_SS_MASK 0x00000002
-#define EXEC_SS_STEP_SIZE_SHIFT 2
-#define EXEC_SS_DELAY_SHIFT 4
-#define ACTIVEDATA_TO_BLON_DELAY_SHIFT 4
-
-typedef struct _ATOM_SPREAD_SPECTRUM_INFO
-{
- ATOM_COMMON_TABLE_HEADER sHeader;
- ATOM_SPREAD_SPECTRUM_ASSIGNMENT asSS_Info[ATOM_MAX_SS_ENTRY];
-}ATOM_SPREAD_SPECTRUM_INFO;
-
-/****************************************************************************/
-// Structure used in AnalogTV_InfoTable (Top level)
-/****************************************************************************/
-//ucTVBootUpDefaultStd definiton:
-
-//ATOM_TV_NTSC 1
-//ATOM_TV_NTSCJ 2
-//ATOM_TV_PAL 3
-//ATOM_TV_PALM 4
-//ATOM_TV_PALCN 5
-//ATOM_TV_PALN 6
-//ATOM_TV_PAL60 7
-//ATOM_TV_SECAM 8
-
-//ucTVSuppportedStd definition:
-#define NTSC_SUPPORT 0x1
-#define NTSCJ_SUPPORT 0x2
-
-#define PAL_SUPPORT 0x4
-#define PALM_SUPPORT 0x8
-#define PALCN_SUPPORT 0x10
-#define PALN_SUPPORT 0x20
-#define PAL60_SUPPORT 0x40
-#define SECAM_SUPPORT 0x80
-
-#define MAX_SUPPORTED_TV_TIMING 2
-
-typedef struct _ATOM_ANALOG_TV_INFO
-{
- ATOM_COMMON_TABLE_HEADER sHeader;
- UCHAR ucTV_SupportedStandard;
- UCHAR ucTV_BootUpDefaultStandard;
- UCHAR ucExt_TV_ASIC_ID;
- UCHAR ucExt_TV_ASIC_SlaveAddr;
- /*ATOM_DTD_FORMAT aModeTimings[MAX_SUPPORTED_TV_TIMING];*/
- ATOM_MODE_TIMING aModeTimings[MAX_SUPPORTED_TV_TIMING];
-}ATOM_ANALOG_TV_INFO;
-
-
-/**************************************************************************/
-// VRAM usage and their defintions
-
-// One chunk of VRAM used by Bios are for HWICON surfaces,EDID data.
-// Current Mode timing and Dail Timing and/or STD timing data EACH device. They can be broken down as below.
-// All the addresses below are the offsets from the frame buffer start.They all MUST be Dword aligned!
-// To driver: The physical address of this memory portion=mmFB_START(4K aligned)+ATOMBIOS_VRAM_USAGE_START_ADDR+ATOM_x_ADDR
-// To Bios: ATOMBIOS_VRAM_USAGE_START_ADDR+ATOM_x_ADDR->MM_INDEX
-
-#ifndef VESA_MEMORY_IN_64K_BLOCK
-#define VESA_MEMORY_IN_64K_BLOCK 0x100 //256*64K=16Mb (Max. VESA memory is 16Mb!)
-#endif
-
-#define ATOM_EDID_RAW_DATASIZE 256 //In Bytes
-#define ATOM_HWICON_SURFACE_SIZE 4096 //In Bytes
-#define ATOM_HWICON_INFOTABLE_SIZE 32
-#define MAX_DTD_MODE_IN_VRAM 6
-#define ATOM_DTD_MODE_SUPPORT_TBL_SIZE (MAX_DTD_MODE_IN_VRAM*28) //28= (SIZEOF ATOM_DTD_FORMAT)
-#define ATOM_STD_MODE_SUPPORT_TBL_SIZE 32*8 //32 is a predefined number,8= (SIZEOF ATOM_STD_FORMAT)
-#define DFP_ENCODER_TYPE_OFFSET 0x80
-#define DP_ENCODER_LANE_NUM_OFFSET 0x84
-#define DP_ENCODER_LINK_RATE_OFFSET 0x88
-
-#define ATOM_HWICON1_SURFACE_ADDR 0
-#define ATOM_HWICON2_SURFACE_ADDR (ATOM_HWICON1_SURFACE_ADDR + ATOM_HWICON_SURFACE_SIZE)
-#define ATOM_HWICON_INFOTABLE_ADDR (ATOM_HWICON2_SURFACE_ADDR + ATOM_HWICON_SURFACE_SIZE)
-#define ATOM_CRT1_EDID_ADDR (ATOM_HWICON_INFOTABLE_ADDR + ATOM_HWICON_INFOTABLE_SIZE)
-#define ATOM_CRT1_DTD_MODE_TBL_ADDR (ATOM_CRT1_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
-#define ATOM_CRT1_STD_MODE_TBL_ADDR (ATOM_CRT1_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
-
-#define ATOM_LCD1_EDID_ADDR (ATOM_CRT1_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
-#define ATOM_LCD1_DTD_MODE_TBL_ADDR (ATOM_LCD1_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
-#define ATOM_LCD1_STD_MODE_TBL_ADDR (ATOM_LCD1_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
-
-#define ATOM_TV1_DTD_MODE_TBL_ADDR (ATOM_LCD1_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
-
-#define ATOM_DFP1_EDID_ADDR (ATOM_TV1_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
-#define ATOM_DFP1_DTD_MODE_TBL_ADDR (ATOM_DFP1_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
-#define ATOM_DFP1_STD_MODE_TBL_ADDR (ATOM_DFP1_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
-
-#define ATOM_CRT2_EDID_ADDR (ATOM_DFP1_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
-#define ATOM_CRT2_DTD_MODE_TBL_ADDR (ATOM_CRT2_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
-#define ATOM_CRT2_STD_MODE_TBL_ADDR (ATOM_CRT2_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
-
-#define ATOM_LCD2_EDID_ADDR (ATOM_CRT2_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
-#define ATOM_LCD2_DTD_MODE_TBL_ADDR (ATOM_LCD2_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
-#define ATOM_LCD2_STD_MODE_TBL_ADDR (ATOM_LCD2_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
-
-#define ATOM_TV2_EDID_ADDR (ATOM_LCD2_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
-#define ATOM_TV2_DTD_MODE_TBL_ADDR (ATOM_TV2_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
-#define ATOM_TV2_STD_MODE_TBL_ADDR (ATOM_TV2_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
-
-#define ATOM_DFP2_EDID_ADDR (ATOM_TV2_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
-#define ATOM_DFP2_DTD_MODE_TBL_ADDR (ATOM_DFP2_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
-#define ATOM_DFP2_STD_MODE_TBL_ADDR (ATOM_DFP2_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
-
-#define ATOM_CV_EDID_ADDR (ATOM_DFP2_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
-#define ATOM_CV_DTD_MODE_TBL_ADDR (ATOM_CV_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
-#define ATOM_CV_STD_MODE_TBL_ADDR (ATOM_CV_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
-
-#define ATOM_DFP3_EDID_ADDR (ATOM_CV_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
-#define ATOM_DFP3_DTD_MODE_TBL_ADDR (ATOM_DFP3_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
-#define ATOM_DFP3_STD_MODE_TBL_ADDR (ATOM_DFP3_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
-
-#define ATOM_DFP4_EDID_ADDR (ATOM_DFP3_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
-#define ATOM_DFP4_DTD_MODE_TBL_ADDR (ATOM_DFP4_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
-#define ATOM_DFP4_STD_MODE_TBL_ADDR (ATOM_DFP4_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
-
-#define ATOM_DFP5_EDID_ADDR (ATOM_DFP4_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
-#define ATOM_DFP5_DTD_MODE_TBL_ADDR (ATOM_DFP5_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
-#define ATOM_DFP5_STD_MODE_TBL_ADDR (ATOM_DFP5_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
-
-#define ATOM_DP_TRAINING_TBL_ADDR (ATOM_DFP5_STD_MODE_TBL_ADDR+ATOM_STD_MODE_SUPPORT_TBL_SIZE)
-
-#define ATOM_STACK_STORAGE_START (ATOM_DP_TRAINING_TBL_ADDR+256)
-#define ATOM_STACK_STORAGE_END ATOM_STACK_STORAGE_START+512
-
-//The size below is in Kb!
-#define ATOM_VRAM_RESERVE_SIZE ((((ATOM_STACK_STORAGE_END - ATOM_HWICON1_SURFACE_ADDR)>>10)+4)&0xFFFC)
-
-#define ATOM_VRAM_OPERATION_FLAGS_MASK 0xC0000000L
-#define ATOM_VRAM_OPERATION_FLAGS_SHIFT 30
-#define ATOM_VRAM_BLOCK_NEEDS_NO_RESERVATION 0x1
-#define ATOM_VRAM_BLOCK_NEEDS_RESERVATION 0x0
-
-/***********************************************************************************/
-// Structure used in VRAM_UsageByFirmwareTable
-// Note1: This table is filled by SetBiosReservationStartInFB in CoreCommSubs.asm
-// at running time.
-// note2: From RV770, the memory is more than 32bit addressable, so we will change
-// ucTableFormatRevision=1,ucTableContentRevision=4, the strcuture remains
-// exactly same as 1.1 and 1.2 (1.3 is never in use), but ulStartAddrUsedByFirmware
-// (in offset to start of memory address) is KB aligned instead of byte aligend.
-/***********************************************************************************/
-#define ATOM_MAX_FIRMWARE_VRAM_USAGE_INFO 1
-
-typedef struct _ATOM_FIRMWARE_VRAM_RESERVE_INFO
-{
- ULONG ulStartAddrUsedByFirmware;
- USHORT usFirmwareUseInKb;
- USHORT usReserved;
-}ATOM_FIRMWARE_VRAM_RESERVE_INFO;
-
-typedef struct _ATOM_VRAM_USAGE_BY_FIRMWARE
-{
- ATOM_COMMON_TABLE_HEADER sHeader;
- ATOM_FIRMWARE_VRAM_RESERVE_INFO asFirmwareVramReserveInfo[ATOM_MAX_FIRMWARE_VRAM_USAGE_INFO];
-}ATOM_VRAM_USAGE_BY_FIRMWARE;
-
-/****************************************************************************/
-// Structure used in GPIO_Pin_LUTTable
-/****************************************************************************/
-typedef struct _ATOM_GPIO_PIN_ASSIGNMENT
-{
- USHORT usGpioPin_AIndex;
- UCHAR ucGpioPinBitShift;
- UCHAR ucGPIO_ID;
-}ATOM_GPIO_PIN_ASSIGNMENT;
-
-typedef struct _ATOM_GPIO_PIN_LUT
-{
- ATOM_COMMON_TABLE_HEADER sHeader;
- ATOM_GPIO_PIN_ASSIGNMENT asGPIO_Pin[1];
-}ATOM_GPIO_PIN_LUT;
-
-/****************************************************************************/
-// Structure used in ComponentVideoInfoTable
-/****************************************************************************/
-#define GPIO_PIN_ACTIVE_HIGH 0x1
-
-#define MAX_SUPPORTED_CV_STANDARDS 5
-
-// definitions for ATOM_D_INFO.ucSettings
-#define ATOM_GPIO_SETTINGS_BITSHIFT_MASK 0x1F // [4:0]
-#define ATOM_GPIO_SETTINGS_RESERVED_MASK 0x60 // [6:5] = must be zeroed out
-#define ATOM_GPIO_SETTINGS_ACTIVE_MASK 0x80 // [7]
-
-typedef struct _ATOM_GPIO_INFO
-{
- USHORT usAOffset;
- UCHAR ucSettings;
- UCHAR ucReserved;
-}ATOM_GPIO_INFO;
-
-// definitions for ATOM_COMPONENT_VIDEO_INFO.ucMiscInfo (bit vector)
-#define ATOM_CV_RESTRICT_FORMAT_SELECTION 0x2
-
-// definitions for ATOM_COMPONENT_VIDEO_INFO.uc480i/uc480p/uc720p/uc1080i
-#define ATOM_GPIO_DEFAULT_MODE_EN 0x80 //[7];
-#define ATOM_GPIO_SETTING_PERMODE_MASK 0x7F //[6:0]
-
-// definitions for ATOM_COMPONENT_VIDEO_INFO.ucLetterBoxMode
-//Line 3 out put 5V.
-#define ATOM_CV_LINE3_ASPECTRATIO_16_9_GPIO_A 0x01 //represent gpio 3 state for 16:9
-#define ATOM_CV_LINE3_ASPECTRATIO_16_9_GPIO_B 0x02 //represent gpio 4 state for 16:9
-#define ATOM_CV_LINE3_ASPECTRATIO_16_9_GPIO_SHIFT 0x0
-
-//Line 3 out put 2.2V
-#define ATOM_CV_LINE3_ASPECTRATIO_4_3_LETBOX_GPIO_A 0x04 //represent gpio 3 state for 4:3 Letter box
-#define ATOM_CV_LINE3_ASPECTRATIO_4_3_LETBOX_GPIO_B 0x08 //represent gpio 4 state for 4:3 Letter box
-#define ATOM_CV_LINE3_ASPECTRATIO_4_3_LETBOX_GPIO_SHIFT 0x2
-
-//Line 3 out put 0V
-#define ATOM_CV_LINE3_ASPECTRATIO_4_3_GPIO_A 0x10 //represent gpio 3 state for 4:3
-#define ATOM_CV_LINE3_ASPECTRATIO_4_3_GPIO_B 0x20 //represent gpio 4 state for 4:3
-#define ATOM_CV_LINE3_ASPECTRATIO_4_3_GPIO_SHIFT 0x4
-
-#define ATOM_CV_LINE3_ASPECTRATIO_MASK 0x3F // bit [5:0]
-
-#define ATOM_CV_LINE3_ASPECTRATIO_EXIST 0x80 //bit 7
-
-//GPIO bit index in gpio setting per mode value, also represend the block no. in gpio blocks.
-#define ATOM_GPIO_INDEX_LINE3_ASPECRATIO_GPIO_A 3 //bit 3 in uc480i/uc480p/uc720p/uc1080i, which represend the default gpio bit setting for the mode.
-#define ATOM_GPIO_INDEX_LINE3_ASPECRATIO_GPIO_B 4 //bit 4 in uc480i/uc480p/uc720p/uc1080i, which represend the default gpio bit setting for the mode.
-
-
-typedef struct _ATOM_COMPONENT_VIDEO_INFO
-{
- ATOM_COMMON_TABLE_HEADER sHeader;
- USHORT usMask_PinRegisterIndex;
- USHORT usEN_PinRegisterIndex;
- USHORT usY_PinRegisterIndex;
- USHORT usA_PinRegisterIndex;
- UCHAR ucBitShift;
- UCHAR ucPinActiveState; //ucPinActiveState: Bit0=1 active high, =0 active low
- ATOM_DTD_FORMAT sReserved; // must be zeroed out
- UCHAR ucMiscInfo;
- UCHAR uc480i;
- UCHAR uc480p;
- UCHAR uc720p;
- UCHAR uc1080i;
- UCHAR ucLetterBoxMode;
- UCHAR ucReserved[3];
- UCHAR ucNumOfWbGpioBlocks; //For Component video D-Connector support. If zere, NTSC type connector
- ATOM_GPIO_INFO aWbGpioStateBlock[MAX_SUPPORTED_CV_STANDARDS];
- ATOM_DTD_FORMAT aModeTimings[MAX_SUPPORTED_CV_STANDARDS];
-}ATOM_COMPONENT_VIDEO_INFO;
-
-//ucTableFormatRevision=2
-//ucTableContentRevision=1
-typedef struct _ATOM_COMPONENT_VIDEO_INFO_V21
-{
- ATOM_COMMON_TABLE_HEADER sHeader;
- UCHAR ucMiscInfo;
- UCHAR uc480i;
- UCHAR uc480p;
- UCHAR uc720p;
- UCHAR uc1080i;
- UCHAR ucReserved;
- UCHAR ucLetterBoxMode;
- UCHAR ucNumOfWbGpioBlocks; //For Component video D-Connector support. If zere, NTSC type connector
- ATOM_GPIO_INFO aWbGpioStateBlock[MAX_SUPPORTED_CV_STANDARDS];
- ATOM_DTD_FORMAT aModeTimings[MAX_SUPPORTED_CV_STANDARDS];
-}ATOM_COMPONENT_VIDEO_INFO_V21;
-
-#define ATOM_COMPONENT_VIDEO_INFO_LAST ATOM_COMPONENT_VIDEO_INFO_V21
-
-/****************************************************************************/
-// Structure used in object_InfoTable
-/****************************************************************************/
-typedef struct _ATOM_OBJECT_HEADER
-{
- ATOM_COMMON_TABLE_HEADER sHeader;
- USHORT usDeviceSupport;
- USHORT usConnectorObjectTableOffset;
- USHORT usRouterObjectTableOffset;
- USHORT usEncoderObjectTableOffset;
- USHORT usProtectionObjectTableOffset; //only available when Protection block is independent.
- USHORT usDisplayPathTableOffset;
-}ATOM_OBJECT_HEADER;
-
-
-typedef struct _ATOM_DISPLAY_OBJECT_PATH
-{
- USHORT usDeviceTag; //supported device
- USHORT usSize; //the size of ATOM_DISPLAY_OBJECT_PATH
- USHORT usConnObjectId; //Connector Object ID
- USHORT usGPUObjectId; //GPU ID
- USHORT usGraphicObjIds[1]; //1st Encoder Obj source from GPU to last Graphic Obj destinate to connector.
-}ATOM_DISPLAY_OBJECT_PATH;
-
-typedef struct _ATOM_DISPLAY_OBJECT_PATH_TABLE
-{
- UCHAR ucNumOfDispPath;
- UCHAR ucVersion;
- UCHAR ucPadding[2];
- ATOM_DISPLAY_OBJECT_PATH asDispPath[1];
-}ATOM_DISPLAY_OBJECT_PATH_TABLE;
-
-
-typedef struct _ATOM_OBJECT //each object has this structure
-{
- USHORT usObjectID;
- USHORT usSrcDstTableOffset;
- USHORT usRecordOffset; //this pointing to a bunch of records defined below
- USHORT usReserved;
-}ATOM_OBJECT;
-
-typedef struct _ATOM_OBJECT_TABLE //Above 4 object table offset pointing to a bunch of objects all have this structure
-{
- UCHAR ucNumberOfObjects;
- UCHAR ucPadding[3];
- ATOM_OBJECT asObjects[1];
-}ATOM_OBJECT_TABLE;
-
-typedef struct _ATOM_SRC_DST_TABLE_FOR_ONE_OBJECT //usSrcDstTableOffset pointing to this structure
-{
- UCHAR ucNumberOfSrc;
- USHORT usSrcObjectID[1];
- UCHAR ucNumberOfDst;
- USHORT usDstObjectID[1];
-}ATOM_SRC_DST_TABLE_FOR_ONE_OBJECT;
-
-
-//Related definitions, all records are differnt but they have a commond header
-typedef struct _ATOM_COMMON_RECORD_HEADER
-{
- UCHAR ucRecordType; //An emun to indicate the record type
- UCHAR ucRecordSize; //The size of the whole record in byte
-}ATOM_COMMON_RECORD_HEADER;
-
-
-#define ATOM_I2C_RECORD_TYPE 1
-#define ATOM_HPD_INT_RECORD_TYPE 2
-#define ATOM_OUTPUT_PROTECTION_RECORD_TYPE 3
-#define ATOM_CONNECTOR_DEVICE_TAG_RECORD_TYPE 4
-#define ATOM_CONNECTOR_DVI_EXT_INPUT_RECORD_TYPE 5 //Obsolete, switch to use GPIO_CNTL_RECORD_TYPE
-#define ATOM_ENCODER_FPGA_CONTROL_RECORD_TYPE 6 //Obsolete, switch to use GPIO_CNTL_RECORD_TYPE
-#define ATOM_CONNECTOR_CVTV_SHARE_DIN_RECORD_TYPE 7
-#define ATOM_JTAG_RECORD_TYPE 8 //Obsolete, switch to use GPIO_CNTL_RECORD_TYPE
-#define ATOM_OBJECT_GPIO_CNTL_RECORD_TYPE 9
-#define ATOM_ENCODER_DVO_CF_RECORD_TYPE 10
-#define ATOM_CONNECTOR_CF_RECORD_TYPE 11
-#define ATOM_CONNECTOR_HARDCODE_DTD_RECORD_TYPE 12
-#define ATOM_CONNECTOR_PCIE_SUBCONNECTOR_RECORD_TYPE 13
-#define ATOM_ROUTER_DDC_PATH_SELECT_RECORD_TYPE 14
-#define ATOM_ROUTER_DATA_CLOCK_PATH_SELECT_RECORD_TYPE 15
-
-//Must be updated when new record type is added,equal to that record definition!
-#define ATOM_MAX_OBJECT_RECORD_NUMBER ATOM_CONNECTOR_CF_RECORD_TYPE
-
-typedef struct _ATOM_I2C_RECORD
-{
- ATOM_COMMON_RECORD_HEADER sheader;
- ATOM_I2C_ID_CONFIG sucI2cId;
- UCHAR ucI2CAddr; //The slave address, it's 0 when the record is attached to connector for DDC
-}ATOM_I2C_RECORD;
-
-typedef struct _ATOM_HPD_INT_RECORD
-{
- ATOM_COMMON_RECORD_HEADER sheader;
- UCHAR ucHPDIntGPIOID; //Corresponding block in GPIO_PIN_INFO table gives the pin info
- UCHAR ucPluggged_PinState;
-}ATOM_HPD_INT_RECORD;
-
-
-typedef struct _ATOM_OUTPUT_PROTECTION_RECORD
-{
- ATOM_COMMON_RECORD_HEADER sheader;
- UCHAR ucProtectionFlag;
- UCHAR ucReserved;
-}ATOM_OUTPUT_PROTECTION_RECORD;
-
-typedef struct _ATOM_CONNECTOR_DEVICE_TAG
-{
- ULONG ulACPIDeviceEnum; //Reserved for now
- USHORT usDeviceID; //This Id is same as "ATOM_DEVICE_XXX_SUPPORT"
- USHORT usPadding;
-}ATOM_CONNECTOR_DEVICE_TAG;
-
-typedef struct _ATOM_CONNECTOR_DEVICE_TAG_RECORD
-{
- ATOM_COMMON_RECORD_HEADER sheader;
- UCHAR ucNumberOfDevice;
- UCHAR ucReserved;
- ATOM_CONNECTOR_DEVICE_TAG asDeviceTag[1]; //This Id is same as "ATOM_DEVICE_XXX_SUPPORT", 1 is only for allocation
-}ATOM_CONNECTOR_DEVICE_TAG_RECORD;
-
-
-typedef struct _ATOM_CONNECTOR_DVI_EXT_INPUT_RECORD
-{
- ATOM_COMMON_RECORD_HEADER sheader;
- UCHAR ucConfigGPIOID;
- UCHAR ucConfigGPIOState; //Set to 1 when it's active high to enable external flow in
- UCHAR ucFlowinGPIPID;
- UCHAR ucExtInGPIPID;
-}ATOM_CONNECTOR_DVI_EXT_INPUT_RECORD;
-
-typedef struct _ATOM_ENCODER_FPGA_CONTROL_RECORD
-{
- ATOM_COMMON_RECORD_HEADER sheader;
- UCHAR ucCTL1GPIO_ID;
- UCHAR ucCTL1GPIOState; //Set to 1 when it's active high
- UCHAR ucCTL2GPIO_ID;
- UCHAR ucCTL2GPIOState; //Set to 1 when it's active high
- UCHAR ucCTL3GPIO_ID;
- UCHAR ucCTL3GPIOState; //Set to 1 when it's active high
- UCHAR ucCTLFPGA_IN_ID;
- UCHAR ucPadding[3];
-}ATOM_ENCODER_FPGA_CONTROL_RECORD;
-
-typedef struct _ATOM_CONNECTOR_CVTV_SHARE_DIN_RECORD
-{
- ATOM_COMMON_RECORD_HEADER sheader;
- UCHAR ucGPIOID; //Corresponding block in GPIO_PIN_INFO table gives the pin info
- UCHAR ucTVActiveState; //Indicating when the pin==0 or 1 when TV is connected
-}ATOM_CONNECTOR_CVTV_SHARE_DIN_RECORD;
-
-typedef struct _ATOM_JTAG_RECORD
-{
- ATOM_COMMON_RECORD_HEADER sheader;
- UCHAR ucTMSGPIO_ID;
- UCHAR ucTMSGPIOState; //Set to 1 when it's active high
- UCHAR ucTCKGPIO_ID;
- UCHAR ucTCKGPIOState; //Set to 1 when it's active high
- UCHAR ucTDOGPIO_ID;
- UCHAR ucTDOGPIOState; //Set to 1 when it's active high
- UCHAR ucTDIGPIO_ID;
- UCHAR ucTDIGPIOState; //Set to 1 when it's active high
- UCHAR ucPadding[2];
-}ATOM_JTAG_RECORD;
-
-
-//The following generic object gpio pin control record type will replace JTAG_RECORD/FPGA_CONTROL_RECORD/DVI_EXT_INPUT_RECORD above gradually
-typedef struct _ATOM_GPIO_PIN_CONTROL_PAIR
-{
- UCHAR ucGPIOID; // GPIO_ID, find the corresponding ID in GPIO_LUT table
- UCHAR ucGPIO_PinState; // Pin state showing how to set-up the pin
-}ATOM_GPIO_PIN_CONTROL_PAIR;
-
-typedef struct _ATOM_OBJECT_GPIO_CNTL_RECORD
-{
- ATOM_COMMON_RECORD_HEADER sheader;
- UCHAR ucFlags; // Future expnadibility
- UCHAR ucNumberOfPins; // Number of GPIO pins used to control the object
- ATOM_GPIO_PIN_CONTROL_PAIR asGpio[1]; // the real gpio pin pair determined by number of pins ucNumberOfPins
-}ATOM_OBJECT_GPIO_CNTL_RECORD;
-
-//Definitions for GPIO pin state
-#define GPIO_PIN_TYPE_INPUT 0x00
-#define GPIO_PIN_TYPE_OUTPUT 0x10
-#define GPIO_PIN_TYPE_HW_CONTROL 0x20
-
-//For GPIO_PIN_TYPE_OUTPUT the following is defined
-#define GPIO_PIN_OUTPUT_STATE_MASK 0x01
-#define GPIO_PIN_OUTPUT_STATE_SHIFT 0
-#define GPIO_PIN_STATE_ACTIVE_LOW 0x0
-#define GPIO_PIN_STATE_ACTIVE_HIGH 0x1
-
-typedef struct _ATOM_ENCODER_DVO_CF_RECORD
-{
- ATOM_COMMON_RECORD_HEADER sheader;
- ULONG ulStrengthControl; // DVOA strength control for CF
- UCHAR ucPadding[2];
-}ATOM_ENCODER_DVO_CF_RECORD;
-
-// value for ATOM_CONNECTOR_CF_RECORD.ucConnectedDvoBundle
-#define ATOM_CONNECTOR_CF_RECORD_CONNECTED_UPPER12BITBUNDLEA 1
-#define ATOM_CONNECTOR_CF_RECORD_CONNECTED_LOWER12BITBUNDLEB 2
-
-typedef struct _ATOM_CONNECTOR_CF_RECORD
-{
- ATOM_COMMON_RECORD_HEADER sheader;
- USHORT usMaxPixClk;
- UCHAR ucFlowCntlGpioId;
- UCHAR ucSwapCntlGpioId;
- UCHAR ucConnectedDvoBundle;
- UCHAR ucPadding;
-}ATOM_CONNECTOR_CF_RECORD;
-
-typedef struct _ATOM_CONNECTOR_HARDCODE_DTD_RECORD
-{
- ATOM_COMMON_RECORD_HEADER sheader;
- ATOM_DTD_FORMAT asTiming;
-}ATOM_CONNECTOR_HARDCODE_DTD_RECORD;
-
-typedef struct _ATOM_CONNECTOR_PCIE_SUBCONNECTOR_RECORD
-{
- ATOM_COMMON_RECORD_HEADER sheader; //ATOM_CONNECTOR_PCIE_SUBCONNECTOR_RECORD_TYPE
- UCHAR ucSubConnectorType; //CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D|X_ID_DUAL_LINK_DVI_D|HDMI_TYPE_A
- UCHAR ucReserved;
-}ATOM_CONNECTOR_PCIE_SUBCONNECTOR_RECORD;
-
-
-typedef struct _ATOM_ROUTER_DDC_PATH_SELECT_RECORD
-{
- ATOM_COMMON_RECORD_HEADER sheader;
- UCHAR ucMuxType; //decide the number of ucMuxState, =0, no pin state, =1: single state with complement, >1: multiple state
- UCHAR ucMuxControlPin;
- UCHAR ucMuxState[2]; //for alligment purpose
-}ATOM_ROUTER_DDC_PATH_SELECT_RECORD;
-
-typedef struct _ATOM_ROUTER_DATA_CLOCK_PATH_SELECT_RECORD
-{
- ATOM_COMMON_RECORD_HEADER sheader;
- UCHAR ucMuxType;
- UCHAR ucMuxControlPin;
- UCHAR ucMuxState[2]; //for alligment purpose
-}ATOM_ROUTER_DATA_CLOCK_PATH_SELECT_RECORD;
-
-// define ucMuxType
-#define ATOM_ROUTER_MUX_PIN_STATE_MASK 0x0f
-#define ATOM_ROUTER_MUX_PIN_SINGLE_STATE_COMPLEMENT 0x01
-
-/****************************************************************************/
-// ASIC voltage data table
-/****************************************************************************/
-typedef struct _ATOM_VOLTAGE_INFO_HEADER
-{
- USHORT usVDDCBaseLevel; //In number of 50mv unit
- USHORT usReserved; //For possible extension table offset
- UCHAR ucNumOfVoltageEntries;
- UCHAR ucBytesPerVoltageEntry;
- UCHAR ucVoltageStep; //Indicating in how many mv increament is one step, 0.5mv unit
- UCHAR ucDefaultVoltageEntry;
- UCHAR ucVoltageControlI2cLine;
- UCHAR ucVoltageControlAddress;
- UCHAR ucVoltageControlOffset;
-}ATOM_VOLTAGE_INFO_HEADER;
-
-typedef struct _ATOM_VOLTAGE_INFO
-{
- ATOM_COMMON_TABLE_HEADER sHeader;
- ATOM_VOLTAGE_INFO_HEADER viHeader;
- UCHAR ucVoltageEntries[64]; //64 is for allocation, the actual number of entry is present at ucNumOfVoltageEntries*ucBytesPerVoltageEntry
-}ATOM_VOLTAGE_INFO;
-
-
-typedef struct _ATOM_VOLTAGE_FORMULA
-{
- USHORT usVoltageBaseLevel; // In number of 1mv unit
- USHORT usVoltageStep; // Indicating in how many mv increament is one step, 1mv unit
- UCHAR ucNumOfVoltageEntries; // Number of Voltage Entry, which indicate max Voltage
- UCHAR ucFlag; // bit0=0 :step is 1mv =1 0.5mv
- UCHAR ucBaseVID; // if there is no lookup table, VID= BaseVID + ( Vol - BaseLevle ) /VoltageStep
- UCHAR ucReserved;
- UCHAR ucVIDAdjustEntries[32]; // 32 is for allocation, the actual number of entry is present at ucNumOfVoltageEntries
-}ATOM_VOLTAGE_FORMULA;
-
-typedef struct _ATOM_VOLTAGE_CONTROL
-{
- UCHAR ucVoltageControlId; //Indicate it is controlled by I2C or GPIO or HW state machine
- UCHAR ucVoltageControlI2cLine;
- UCHAR ucVoltageControlAddress;
- UCHAR ucVoltageControlOffset;
- USHORT usGpioPin_AIndex; //GPIO_PAD register index
- UCHAR ucGpioPinBitShift[9]; //at most 8 pin support 255 VIDs, termintate with 0xff
- UCHAR ucReserved;
-}ATOM_VOLTAGE_CONTROL;
-
-// Define ucVoltageControlId
-#define VOLTAGE_CONTROLLED_BY_HW 0x00
-#define VOLTAGE_CONTROLLED_BY_I2C_MASK 0x7F
-#define VOLTAGE_CONTROLLED_BY_GPIO 0x80
-#define VOLTAGE_CONTROL_ID_LM64 0x01 //I2C control, used for R5xx Core Voltage
-#define VOLTAGE_CONTROL_ID_DAC 0x02 //I2C control, used for R5xx/R6xx MVDDC,MVDDQ or VDDCI
-#define VOLTAGE_CONTROL_ID_VT116xM 0x03 //I2C control, used for R6xx Core Voltage
-#define VOLTAGE_CONTROL_ID_DS4402 0x04
-
-typedef struct _ATOM_VOLTAGE_OBJECT
-{
- UCHAR ucVoltageType; //Indicate Voltage Source: VDDC, MVDDC, MVDDQ or MVDDCI
- UCHAR ucSize; //Size of Object
- ATOM_VOLTAGE_CONTROL asControl; //describ how to control
- ATOM_VOLTAGE_FORMULA asFormula; //Indicate How to convert real Voltage to VID
-}ATOM_VOLTAGE_OBJECT;
-
-typedef struct _ATOM_VOLTAGE_OBJECT_INFO
-{
- ATOM_COMMON_TABLE_HEADER sHeader;
- ATOM_VOLTAGE_OBJECT asVoltageObj[3]; //Info for Voltage control
-}ATOM_VOLTAGE_OBJECT_INFO;
-
-typedef struct _ATOM_LEAKID_VOLTAGE
-{
- UCHAR ucLeakageId;
- UCHAR ucReserved;
- USHORT usVoltage;
-}ATOM_LEAKID_VOLTAGE;
-
-typedef struct _ATOM_ASIC_PROFILE_VOLTAGE
-{
- UCHAR ucProfileId;
- UCHAR ucReserved;
- USHORT usSize;
- USHORT usEfuseSpareStartAddr;
- USHORT usFuseIndex[8]; //from LSB to MSB, Max 8bit,end of 0xffff if less than 8 efuse id,
- ATOM_LEAKID_VOLTAGE asLeakVol[2]; //Leakid and relatd voltage
-}ATOM_ASIC_PROFILE_VOLTAGE;
-
-//ucProfileId
-#define ATOM_ASIC_PROFILE_ID_EFUSE_VOLTAGE 1
-#define ATOM_ASIC_PROFILE_ID_EFUSE_PERFORMANCE_VOLTAGE 1
-#define ATOM_ASIC_PROFILE_ID_EFUSE_THERMAL_VOLTAGE 2
-
-typedef struct _ATOM_ASIC_PROFILING_INFO
-{
- ATOM_COMMON_TABLE_HEADER asHeader;
- ATOM_ASIC_PROFILE_VOLTAGE asVoltage;
-}ATOM_ASIC_PROFILING_INFO;
-
-typedef struct _ATOM_POWER_SOURCE_OBJECT
-{
- UCHAR ucPwrSrcId; // Power source
- UCHAR ucPwrSensorType; // GPIO, I2C or none
- UCHAR ucPwrSensId; // if GPIO detect, it is GPIO id, if I2C detect, it is I2C id
- UCHAR ucPwrSensSlaveAddr; // Slave address if I2C detect
- UCHAR ucPwrSensRegIndex; // I2C register Index if I2C detect
- UCHAR ucPwrSensRegBitMask; // detect which bit is used if I2C detect
- UCHAR ucPwrSensActiveState; // high active or low active
- UCHAR ucReserve[3]; // reserve
- USHORT usSensPwr; // in unit of watt
-}ATOM_POWER_SOURCE_OBJECT;
-
-typedef struct _ATOM_POWER_SOURCE_INFO
-{
- ATOM_COMMON_TABLE_HEADER asHeader;
- UCHAR asPwrbehave[16];
- ATOM_POWER_SOURCE_OBJECT asPwrObj[1];
-}ATOM_POWER_SOURCE_INFO;
-
-
-//Define ucPwrSrcId
-#define POWERSOURCE_PCIE_ID1 0x00
-#define POWERSOURCE_6PIN_CONNECTOR_ID1 0x01
-#define POWERSOURCE_8PIN_CONNECTOR_ID1 0x02
-#define POWERSOURCE_6PIN_CONNECTOR_ID2 0x04
-#define POWERSOURCE_8PIN_CONNECTOR_ID2 0x08
-
-//define ucPwrSensorId
-#define POWER_SENSOR_ALWAYS 0x00
-#define POWER_SENSOR_GPIO 0x01
-#define POWER_SENSOR_I2C 0x02
-
-/**************************************************************************/
-// This portion is only used when ext thermal chip or engine/memory clock SS chip is populated on a design
-//Memory SS Info Table
-//Define Memory Clock SS chip ID
-#define ICS91719 1
-#define ICS91720 2
-
-//Define one structure to inform SW a "block of data" writing to external SS chip via I2C protocol
-typedef struct _ATOM_I2C_DATA_RECORD
-{
- UCHAR ucNunberOfBytes; //Indicates how many bytes SW needs to write to the external ASIC for one block, besides to "Start" and "Stop"
- UCHAR ucI2CData[1]; //I2C data in bytes, should be less than 16 bytes usually
-}ATOM_I2C_DATA_RECORD;
-
-
-//Define one structure to inform SW how many blocks of data writing to external SS chip via I2C protocol, in addition to other information
-typedef struct _ATOM_I2C_DEVICE_SETUP_INFO
-{
- ATOM_I2C_ID_CONFIG_ACCESS sucI2cId; //I2C line and HW/SW assisted cap.
- UCHAR ucSSChipID; //SS chip being used
- UCHAR ucSSChipSlaveAddr; //Slave Address to set up this SS chip
- UCHAR ucNumOfI2CDataRecords; //number of data block
- ATOM_I2C_DATA_RECORD asI2CData[1];
-}ATOM_I2C_DEVICE_SETUP_INFO;
-
-//==========================================================================================
-typedef struct _ATOM_ASIC_MVDD_INFO
-{
- ATOM_COMMON_TABLE_HEADER sHeader;
- ATOM_I2C_DEVICE_SETUP_INFO asI2CSetup[1];
-}ATOM_ASIC_MVDD_INFO;
-
-//==========================================================================================
-#define ATOM_MCLK_SS_INFO ATOM_ASIC_MVDD_INFO
-
-//==========================================================================================
-/**************************************************************************/
-
-typedef struct _ATOM_ASIC_SS_ASSIGNMENT
-{
- ULONG ulTargetClockRange; //Clock Out frequence (VCO ), in unit of 10Khz
- USHORT usSpreadSpectrumPercentage; //in unit of 0.01%
- USHORT usSpreadRateInKhz; //in unit of kHz, modulation freq
- UCHAR ucClockIndication; //Indicate which clock source needs SS
- UCHAR ucSpreadSpectrumMode; //Bit1=0 Down Spread,=1 Center Spread.
- UCHAR ucReserved[2];
-}ATOM_ASIC_SS_ASSIGNMENT;
-
-//Define ucSpreadSpectrumType
-#define ASIC_INTERNAL_MEMORY_SS 1
-#define ASIC_INTERNAL_ENGINE_SS 2
-#define ASIC_INTERNAL_UVD_SS 3
-
-typedef struct _ATOM_ASIC_INTERNAL_SS_INFO{
- ATOM_COMMON_TABLE_HEADER sHeader;
- ATOM_ASIC_SS_ASSIGNMENT asSpreadSpectrum[4];
-}ATOM_ASIC_INTERNAL_SS_INFO;
-
-//==============================Scratch Pad Definition Portion===============================
-#define ATOM_DEVICE_CONNECT_INFO_DEF 0
-#define ATOM_ROM_LOCATION_DEF 1
-#define ATOM_TV_STANDARD_DEF 2
-#define ATOM_ACTIVE_INFO_DEF 3
-#define ATOM_LCD_INFO_DEF 4
-#define ATOM_DOS_REQ_INFO_DEF 5
-#define ATOM_ACC_CHANGE_INFO_DEF 6
-#define ATOM_DOS_MODE_INFO_DEF 7
-#define ATOM_I2C_CHANNEL_STATUS_DEF 8
-#define ATOM_I2C_CHANNEL_STATUS1_DEF 9
-
-
-// BIOS_0_SCRATCH Definition
-#define ATOM_S0_CRT1_MONO 0x00000001L
-#define ATOM_S0_CRT1_COLOR 0x00000002L
-#define ATOM_S0_CRT1_MASK (ATOM_S0_CRT1_MONO+ATOM_S0_CRT1_COLOR)
-
-#define ATOM_S0_TV1_COMPOSITE_A 0x00000004L
-#define ATOM_S0_TV1_SVIDEO_A 0x00000008L
-#define ATOM_S0_TV1_MASK_A (ATOM_S0_TV1_COMPOSITE_A+ATOM_S0_TV1_SVIDEO_A)
-
-#define ATOM_S0_CV_A 0x00000010L
-#define ATOM_S0_CV_DIN_A 0x00000020L
-#define ATOM_S0_CV_MASK_A (ATOM_S0_CV_A+ATOM_S0_CV_DIN_A)
-
-
-#define ATOM_S0_CRT2_MONO 0x00000100L
-#define ATOM_S0_CRT2_COLOR 0x00000200L
-#define ATOM_S0_CRT2_MASK (ATOM_S0_CRT2_MONO+ATOM_S0_CRT2_COLOR)
-
-#define ATOM_S0_TV1_COMPOSITE 0x00000400L
-#define ATOM_S0_TV1_SVIDEO 0x00000800L
-#define ATOM_S0_TV1_SCART 0x00004000L
-#define ATOM_S0_TV1_MASK (ATOM_S0_TV1_COMPOSITE+ATOM_S0_TV1_SVIDEO+ATOM_S0_TV1_SCART)
-
-#define ATOM_S0_CV 0x00001000L
-#define ATOM_S0_CV_DIN 0x00002000L
-#define ATOM_S0_CV_MASK (ATOM_S0_CV+ATOM_S0_CV_DIN)
-
-#define ATOM_S0_DFP1 0x00010000L
-#define ATOM_S0_DFP2 0x00020000L
-#define ATOM_S0_LCD1 0x00040000L
-#define ATOM_S0_LCD2 0x00080000L
-#define ATOM_S0_TV2 0x00100000L
-#define ATOM_S0_DFP3 0x00200000L
-#define ATOM_S0_DFP4 0x00400000L
-#define ATOM_S0_DFP5 0x00800000L
-
-#define ATOM_S0_DFP_MASK ATOM_S0_DFP1 | ATOM_S0_DFP2 | ATOM_S0_DFP3 | ATOM_S0_DFP4 | ATOM_S0_DFP5
-
-#define ATOM_S0_FAD_REGISTER_BUG 0x02000000L // If set, indicates we are running a PCIE asic with
- // the FAD/HDP reg access bug. Bit is read by DAL
-
-#define ATOM_S0_THERMAL_STATE_MASK 0x1C000000L
-#define ATOM_S0_THERMAL_STATE_SHIFT 26
-
-#define ATOM_S0_SYSTEM_POWER_STATE_MASK 0xE0000000L
-#define ATOM_S0_SYSTEM_POWER_STATE_SHIFT 29
-
-#define ATOM_S0_SYSTEM_POWER_STATE_VALUE_AC 1
-#define ATOM_S0_SYSTEM_POWER_STATE_VALUE_DC 2
-#define ATOM_S0_SYSTEM_POWER_STATE_VALUE_LITEAC 3
-
-//Byte aligned defintion for BIOS usage
-#define ATOM_S0_CRT1_MONOb0 0x01
-#define ATOM_S0_CRT1_COLORb0 0x02
-#define ATOM_S0_CRT1_MASKb0 (ATOM_S0_CRT1_MONOb0+ATOM_S0_CRT1_COLORb0)
-
-#define ATOM_S0_TV1_COMPOSITEb0 0x04
-#define ATOM_S0_TV1_SVIDEOb0 0x08
-#define ATOM_S0_TV1_MASKb0 (ATOM_S0_TV1_COMPOSITEb0+ATOM_S0_TV1_SVIDEOb0)
-
-#define ATOM_S0_CVb0 0x10
-#define ATOM_S0_CV_DINb0 0x20
-#define ATOM_S0_CV_MASKb0 (ATOM_S0_CVb0+ATOM_S0_CV_DINb0)
-
-#define ATOM_S0_CRT2_MONOb1 0x01
-#define ATOM_S0_CRT2_COLORb1 0x02
-#define ATOM_S0_CRT2_MASKb1 (ATOM_S0_CRT2_MONOb1+ATOM_S0_CRT2_COLORb1)
-
-#define ATOM_S0_TV1_COMPOSITEb1 0x04
-#define ATOM_S0_TV1_SVIDEOb1 0x08
-#define ATOM_S0_TV1_SCARTb1 0x40
-#define ATOM_S0_TV1_MASKb1 (ATOM_S0_TV1_COMPOSITEb1+ATOM_S0_TV1_SVIDEOb1+ATOM_S0_TV1_SCARTb1)
-
-#define ATOM_S0_CVb1 0x10
-#define ATOM_S0_CV_DINb1 0x20
-#define ATOM_S0_CV_MASKb1 (ATOM_S0_CVb1+ATOM_S0_CV_DINb1)
-
-#define ATOM_S0_DFP1b2 0x01
-#define ATOM_S0_DFP2b2 0x02
-#define ATOM_S0_LCD1b2 0x04
-#define ATOM_S0_LCD2b2 0x08
-#define ATOM_S0_TV2b2 0x10
-#define ATOM_S0_DFP3b2 0x20
-
-#define ATOM_S0_THERMAL_STATE_MASKb3 0x1C
-#define ATOM_S0_THERMAL_STATE_SHIFTb3 2
-
-#define ATOM_S0_SYSTEM_POWER_STATE_MASKb3 0xE0
-#define ATOM_S0_LCD1_SHIFT 18
-
-// BIOS_1_SCRATCH Definition
-#define ATOM_S1_ROM_LOCATION_MASK 0x0000FFFFL
-#define ATOM_S1_PCI_BUS_DEV_MASK 0xFFFF0000L
-
-// BIOS_2_SCRATCH Definition
-#define ATOM_S2_TV1_STANDARD_MASK 0x0000000FL
-#define ATOM_S2_CURRENT_BL_LEVEL_MASK 0x0000FF00L
-#define ATOM_S2_CURRENT_BL_LEVEL_SHIFT 8
-
-#define ATOM_S2_CRT1_DPMS_STATE 0x00010000L
-#define ATOM_S2_LCD1_DPMS_STATE 0x00020000L
-#define ATOM_S2_TV1_DPMS_STATE 0x00040000L
-#define ATOM_S2_DFP1_DPMS_STATE 0x00080000L
-#define ATOM_S2_CRT2_DPMS_STATE 0x00100000L
-#define ATOM_S2_LCD2_DPMS_STATE 0x00200000L
-#define ATOM_S2_TV2_DPMS_STATE 0x00400000L
-#define ATOM_S2_DFP2_DPMS_STATE 0x00800000L
-#define ATOM_S2_CV_DPMS_STATE 0x01000000L
-#define ATOM_S2_DFP3_DPMS_STATE 0x02000000L
-#define ATOM_S2_DFP4_DPMS_STATE 0x04000000L
-#define ATOM_S2_DFP5_DPMS_STATE 0x08000000L
-
-#define ATOM_S2_DFP_DPM_STATE ATOM_S2_DFP1_DPMS_STATE | ATOM_S2_DFP2_DPMS_STATE | ATOM_S2_DFP3_DPMS_STATE | ATOM_S2_DFP4_DPMS_STATE | ATOM_S2_DFP5_DPMS_STATE
-
-#define ATOM_S2_DEVICE_DPMS_STATE (ATOM_S2_CRT1_DPMS_STATE+ATOM_S2_LCD1_DPMS_STATE+ATOM_S2_TV1_DPMS_STATE+\
- ATOM_S2_DFP_DPMS_STATE+ATOM_S2_CRT2_DPMS_STATE+ATOM_S2_LCD2_DPMS_STATE+\
- ATOM_S2_TV2_DPMS_STATE+ATOM_S2_CV_DPMS_STATE
-
-#define ATOM_S2_FORCEDLOWPWRMODE_STATE_MASK 0x0C000000L
-#define ATOM_S2_FORCEDLOWPWRMODE_STATE_MASK_SHIFT 26
-#define ATOM_S2_FORCEDLOWPWRMODE_STATE_CHANGE 0x10000000L
-
-#define ATOM_S2_VRI_BRIGHT_ENABLE 0x20000000L
-
-#define ATOM_S2_DISPLAY_ROTATION_0_DEGREE 0x0
-#define ATOM_S2_DISPLAY_ROTATION_90_DEGREE 0x1
-#define ATOM_S2_DISPLAY_ROTATION_180_DEGREE 0x2
-#define ATOM_S2_DISPLAY_ROTATION_270_DEGREE 0x3
-#define ATOM_S2_DISPLAY_ROTATION_DEGREE_SHIFT 30
-#define ATOM_S2_DISPLAY_ROTATION_ANGLE_MASK 0xC0000000L
-
-
-//Byte aligned defintion for BIOS usage
-#define ATOM_S2_TV1_STANDARD_MASKb0 0x0F
-#define ATOM_S2_CURRENT_BL_LEVEL_MASKb1 0xFF
-#define ATOM_S2_CRT1_DPMS_STATEb2 0x01
-#define ATOM_S2_LCD1_DPMS_STATEb2 0x02
-#define ATOM_S2_TV1_DPMS_STATEb2 0x04
-#define ATOM_S2_DFP1_DPMS_STATEb2 0x08
-#define ATOM_S2_CRT2_DPMS_STATEb2 0x10
-#define ATOM_S2_LCD2_DPMS_STATEb2 0x20
-#define ATOM_S2_TV2_DPMS_STATEb2 0x40
-#define ATOM_S2_DFP2_DPMS_STATEb2 0x80
-#define ATOM_S2_CV_DPMS_STATEb3 0x01
-#define ATOM_S2_DFP3_DPMS_STATEb3 0x02
-#define ATOM_S2_DFP4_DPMS_STATEb3 0x04
-#define ATOM_S2_DFP5_DPMS_STATEb3 0x08
-
-#define ATOM_S2_DEVICE_DPMS_MASKw1 0x3FF
-#define ATOM_S2_FORCEDLOWPWRMODE_STATE_MASKb3 0x0C
-#define ATOM_S2_FORCEDLOWPWRMODE_STATE_CHANGEb3 0x10
-#define ATOM_S2_VRI_BRIGHT_ENABLEb3 0x20
-#define ATOM_S2_ROTATION_STATE_MASKb3 0xC0
-
-
-// BIOS_3_SCRATCH Definition
-#define ATOM_S3_CRT1_ACTIVE 0x00000001L
-#define ATOM_S3_LCD1_ACTIVE 0x00000002L
-#define ATOM_S3_TV1_ACTIVE 0x00000004L
-#define ATOM_S3_DFP1_ACTIVE 0x00000008L
-#define ATOM_S3_CRT2_ACTIVE 0x00000010L
-#define ATOM_S3_LCD2_ACTIVE 0x00000020L
-#define ATOM_S3_TV2_ACTIVE 0x00000040L
-#define ATOM_S3_DFP2_ACTIVE 0x00000080L
-#define ATOM_S3_CV_ACTIVE 0x00000100L
-#define ATOM_S3_DFP3_ACTIVE 0x00000200L
-#define ATOM_S3_DFP4_ACTIVE 0x00000400L
-#define ATOM_S3_DFP5_ACTIVE 0x00000800L
-
-#define ATOM_S3_DEVICE_ACTIVE_MASK 0x000003FFL
-
-#define ATOM_S3_LCD_FULLEXPANSION_ACTIVE 0x00001000L
-#define ATOM_S3_LCD_EXPANSION_ASPEC_RATIO_ACTIVE 0x00002000L
-
-#define ATOM_S3_CRT1_CRTC_ACTIVE 0x00010000L
-#define ATOM_S3_LCD1_CRTC_ACTIVE 0x00020000L
-#define ATOM_S3_TV1_CRTC_ACTIVE 0x00040000L
-#define ATOM_S3_DFP1_CRTC_ACTIVE 0x00080000L
-#define ATOM_S3_CRT2_CRTC_ACTIVE 0x00100000L
-#define ATOM_S3_LCD2_CRTC_ACTIVE 0x00200000L
-#define ATOM_S3_TV2_CRTC_ACTIVE 0x00400000L
-#define ATOM_S3_DFP2_CRTC_ACTIVE 0x00800000L
-#define ATOM_S3_CV_CRTC_ACTIVE 0x01000000L
-#define ATOM_S3_DFP3_CRTC_ACTIVE 0x02000000L
-#define ATOM_S3_DFP4_CRTC_ACTIVE 0x04000000L
-#define ATOM_S3_DFP5_CRTC_ACTIVE 0x08000000L
-
-#define ATOM_S3_DEVICE_CRTC_ACTIVE_MASK 0x0FFF0000L
-#define ATOM_S3_ASIC_GUI_ENGINE_HUNG 0x20000000L
-#define ATOM_S3_ALLOW_FAST_PWR_SWITCH 0x40000000L
-#define ATOM_S3_RQST_GPU_USE_MIN_PWR 0x80000000L
-
-//Byte aligned defintion for BIOS usage
-#define ATOM_S3_CRT1_ACTIVEb0 0x01
-#define ATOM_S3_LCD1_ACTIVEb0 0x02
-#define ATOM_S3_TV1_ACTIVEb0 0x04
-#define ATOM_S3_DFP1_ACTIVEb0 0x08
-#define ATOM_S3_CRT2_ACTIVEb0 0x10
-#define ATOM_S3_LCD2_ACTIVEb0 0x20
-#define ATOM_S3_TV2_ACTIVEb0 0x40
-#define ATOM_S3_DFP2_ACTIVEb0 0x80
-#define ATOM_S3_CV_ACTIVEb1 0x01
-#define ATOM_S3_DFP3_ACTIVEb1 0x02
-#define ATOM_S3_DFP4_ACTIVEb1 0x04
-#define ATOM_S3_DFP5_ACTIVEb1 0x08
-
-#define ATOM_S3_ACTIVE_CRTC1w0 0xFFF
-
-#define ATOM_S3_CRT1_CRTC_ACTIVEb2 0x01
-#define ATOM_S3_LCD1_CRTC_ACTIVEb2 0x02
-#define ATOM_S3_TV1_CRTC_ACTIVEb2 0x04
-#define ATOM_S3_DFP1_CRTC_ACTIVEb2 0x08
-#define ATOM_S3_CRT2_CRTC_ACTIVEb2 0x10
-#define ATOM_S3_LCD2_CRTC_ACTIVEb2 0x20
-#define ATOM_S3_TV2_CRTC_ACTIVEb2 0x40
-#define ATOM_S3_DFP2_CRTC_ACTIVEb2 0x80
-#define ATOM_S3_CV_CRTC_ACTIVEb3 0x01
-#define ATOM_S3_DFP3_CRTC_ACTIVEb3 0x02
-#define ATOM_S3_DFP4_CRTC_ACTIVEb3 0x04
-#define ATOM_S3_DFP5_CRTC_ACTIVEb3 0x08
-
-#define ATOM_S3_ACTIVE_CRTC2w1 0xFFF
-
-#define ATOM_S3_ASIC_GUI_ENGINE_HUNGb3 0x20
-#define ATOM_S3_ALLOW_FAST_PWR_SWITCHb3 0x40
-#define ATOM_S3_RQST_GPU_USE_MIN_PWRb3 0x80
-
-// BIOS_4_SCRATCH Definition
-#define ATOM_S4_LCD1_PANEL_ID_MASK 0x000000FFL
-#define ATOM_S4_LCD1_REFRESH_MASK 0x0000FF00L
-#define ATOM_S4_LCD1_REFRESH_SHIFT 8
-
-//Byte aligned defintion for BIOS usage
-#define ATOM_S4_LCD1_PANEL_ID_MASKb0 0x0FF
-#define ATOM_S4_LCD1_REFRESH_MASKb1 ATOM_S4_LCD1_PANEL_ID_MASKb0
-#define ATOM_S4_VRAM_INFO_MASKb2 ATOM_S4_LCD1_PANEL_ID_MASKb0
-
-// BIOS_5_SCRATCH Definition, BIOS_5_SCRATCH is used by Firmware only !!!!
-#define ATOM_S5_DOS_REQ_CRT1b0 0x01
-#define ATOM_S5_DOS_REQ_LCD1b0 0x02
-#define ATOM_S5_DOS_REQ_TV1b0 0x04
-#define ATOM_S5_DOS_REQ_DFP1b0 0x08
-#define ATOM_S5_DOS_REQ_CRT2b0 0x10
-#define ATOM_S5_DOS_REQ_LCD2b0 0x20
-#define ATOM_S5_DOS_REQ_TV2b0 0x40
-#define ATOM_S5_DOS_REQ_DFP2b0 0x80
-#define ATOM_S5_DOS_REQ_CVb1 0x01
-#define ATOM_S5_DOS_REQ_DFP3b1 0x02
-#define ATOM_S5_DOS_REQ_DFP4b1 0x04
-#define ATOM_S5_DOS_REQ_DFP5b1 0x08
-
-#define ATOM_S5_DOS_REQ_DEVICEw0 0x03FF
-
-#define ATOM_S5_DOS_REQ_CRT1 0x0001
-#define ATOM_S5_DOS_REQ_LCD1 0x0002
-#define ATOM_S5_DOS_REQ_TV1 0x0004
-#define ATOM_S5_DOS_REQ_DFP1 0x0008
-#define ATOM_S5_DOS_REQ_CRT2 0x0010
-#define ATOM_S5_DOS_REQ_LCD2 0x0020
-#define ATOM_S5_DOS_REQ_TV2 0x0040
-#define ATOM_S5_DOS_REQ_DFP2 0x0080
-#define ATOM_S5_DOS_REQ_CV 0x0100
-#define ATOM_S5_DOS_REQ_DFP3 0x0200
-#define ATOM_S5_DOS_REQ_DFP4 0x0400
-#define ATOM_S5_DOS_REQ_DFP5 0x0800
-
-#define ATOM_S5_DOS_FORCE_CRT1b2 ATOM_S5_DOS_REQ_CRT1b0
-#define ATOM_S5_DOS_FORCE_TV1b2 ATOM_S5_DOS_REQ_TV1b0
-#define ATOM_S5_DOS_FORCE_CRT2b2 ATOM_S5_DOS_REQ_CRT2b0
-#define ATOM_S5_DOS_FORCE_CVb3 ATOM_S5_DOS_REQ_CVb1
-#define ATOM_S5_DOS_FORCE_DEVICEw1 (ATOM_S5_DOS_FORCE_CRT1b2+ATOM_S5_DOS_FORCE_TV1b2+ATOM_S5_DOS_FORCE_CRT2b2+\
- (ATOM_S5_DOS_FORCE_CVb3<<8))
-
-// BIOS_6_SCRATCH Definition
-#define ATOM_S6_DEVICE_CHANGE 0x00000001L
-#define ATOM_S6_SCALER_CHANGE 0x00000002L
-#define ATOM_S6_LID_CHANGE 0x00000004L
-#define ATOM_S6_DOCKING_CHANGE 0x00000008L
-#define ATOM_S6_ACC_MODE 0x00000010L
-#define ATOM_S6_EXT_DESKTOP_MODE 0x00000020L
-#define ATOM_S6_LID_STATE 0x00000040L
-#define ATOM_S6_DOCK_STATE 0x00000080L
-#define ATOM_S6_CRITICAL_STATE 0x00000100L
-#define ATOM_S6_HW_I2C_BUSY_STATE 0x00000200L
-#define ATOM_S6_THERMAL_STATE_CHANGE 0x00000400L
-#define ATOM_S6_INTERRUPT_SET_BY_BIOS 0x00000800L
-#define ATOM_S6_REQ_LCD_EXPANSION_FULL 0x00001000L //Normal expansion Request bit for LCD
-#define ATOM_S6_REQ_LCD_EXPANSION_ASPEC_RATIO 0x00002000L //Aspect ratio expansion Request bit for LCD
-
-#define ATOM_S6_DISPLAY_STATE_CHANGE 0x00004000L //This bit is recycled when ATOM_BIOS_INFO_BIOS_SCRATCH6_SCL2_REDEFINE is set,previously it's SCL2_H_expansion
-#define ATOM_S6_I2C_STATE_CHANGE 0x00008000L //This bit is recycled,when ATOM_BIOS_INFO_BIOS_SCRATCH6_SCL2_REDEFINE is set,previously it's SCL2_V_expansion
-
-#define ATOM_S6_ACC_REQ_CRT1 0x00010000L
-#define ATOM_S6_ACC_REQ_LCD1 0x00020000L
-#define ATOM_S6_ACC_REQ_TV1 0x00040000L
-#define ATOM_S6_ACC_REQ_DFP1 0x00080000L
-#define ATOM_S6_ACC_REQ_CRT2 0x00100000L
-#define ATOM_S6_ACC_REQ_LCD2 0x00200000L
-#define ATOM_S6_ACC_REQ_TV2 0x00400000L
-#define ATOM_S6_ACC_REQ_DFP2 0x00800000L
-#define ATOM_S6_ACC_REQ_CV 0x01000000L
-#define ATOM_S6_ACC_REQ_DFP3 0x02000000L
-#define ATOM_S6_ACC_REQ_DFP4 0x04000000L
-#define ATOM_S6_ACC_REQ_DFP5 0x08000000L
-
-#define ATOM_S6_ACC_REQ_MASK 0x0FFF0000L
-#define ATOM_S6_SYSTEM_POWER_MODE_CHANGE 0x10000000L
-#define ATOM_S6_ACC_BLOCK_DISPLAY_SWITCH 0x20000000L
-#define ATOM_S6_VRI_BRIGHTNESS_CHANGE 0x40000000L
-#define ATOM_S6_CONFIG_DISPLAY_CHANGE_MASK 0x80000000L
-
-//Byte aligned defintion for BIOS usage
-#define ATOM_S6_DEVICE_CHANGEb0 0x01
-#define ATOM_S6_SCALER_CHANGEb0 0x02
-#define ATOM_S6_LID_CHANGEb0 0x04
-#define ATOM_S6_DOCKING_CHANGEb0 0x08
-#define ATOM_S6_ACC_MODEb0 0x10
-#define ATOM_S6_EXT_DESKTOP_MODEb0 0x20
-#define ATOM_S6_LID_STATEb0 0x40
-#define ATOM_S6_DOCK_STATEb0 0x80
-#define ATOM_S6_CRITICAL_STATEb1 0x01
-#define ATOM_S6_HW_I2C_BUSY_STATEb1 0x02
-#define ATOM_S6_THERMAL_STATE_CHANGEb1 0x04
-#define ATOM_S6_INTERRUPT_SET_BY_BIOSb1 0x08
-#define ATOM_S6_REQ_LCD_EXPANSION_FULLb1 0x10
-#define ATOM_S6_REQ_LCD_EXPANSION_ASPEC_RATIOb1 0x20
-
-#define ATOM_S6_ACC_REQ_CRT1b2 0x01
-#define ATOM_S6_ACC_REQ_LCD1b2 0x02
-#define ATOM_S6_ACC_REQ_TV1b2 0x04
-#define ATOM_S6_ACC_REQ_DFP1b2 0x08
-#define ATOM_S6_ACC_REQ_CRT2b2 0x10
-#define ATOM_S6_ACC_REQ_LCD2b2 0x20
-#define ATOM_S6_ACC_REQ_TV2b2 0x40
-#define ATOM_S6_ACC_REQ_DFP2b2 0x80
-#define ATOM_S6_ACC_REQ_CVb3 0x01
-#define ATOM_S6_ACC_REQ_DFP3b3 0x02
-#define ATOM_S6_ACC_REQ_DFP4b3 0x04
-#define ATOM_S6_ACC_REQ_DFP5b3 0x08
-
-#define ATOM_S6_ACC_REQ_DEVICEw1 ATOM_S5_DOS_REQ_DEVICEw0
-#define ATOM_S6_SYSTEM_POWER_MODE_CHANGEb3 0x10
-#define ATOM_S6_ACC_BLOCK_DISPLAY_SWITCHb3 0x20
-#define ATOM_S6_VRI_BRIGHTNESS_CHANGEb3 0x40
-#define ATOM_S6_CONFIG_DISPLAY_CHANGEb3 0x80
-
-#define ATOM_S6_DEVICE_CHANGE_SHIFT 0
-#define ATOM_S6_SCALER_CHANGE_SHIFT 1
-#define ATOM_S6_LID_CHANGE_SHIFT 2
-#define ATOM_S6_DOCKING_CHANGE_SHIFT 3
-#define ATOM_S6_ACC_MODE_SHIFT 4
-#define ATOM_S6_EXT_DESKTOP_MODE_SHIFT 5
-#define ATOM_S6_LID_STATE_SHIFT 6
-#define ATOM_S6_DOCK_STATE_SHIFT 7
-#define ATOM_S6_CRITICAL_STATE_SHIFT 8
-#define ATOM_S6_HW_I2C_BUSY_STATE_SHIFT 9
-#define ATOM_S6_THERMAL_STATE_CHANGE_SHIFT 10
-#define ATOM_S6_INTERRUPT_SET_BY_BIOS_SHIFT 11
-#define ATOM_S6_REQ_SCALER_SHIFT 12
-#define ATOM_S6_REQ_SCALER_ARATIO_SHIFT 13
-#define ATOM_S6_DISPLAY_STATE_CHANGE_SHIFT 14
-#define ATOM_S6_I2C_STATE_CHANGE_SHIFT 15
-#define ATOM_S6_SYSTEM_POWER_MODE_CHANGE_SHIFT 28
-#define ATOM_S6_ACC_BLOCK_DISPLAY_SWITCH_SHIFT 29
-#define ATOM_S6_VRI_BRIGHTNESS_CHANGE_SHIFT 30
-#define ATOM_S6_CONFIG_DISPLAY_CHANGE_SHIFT 31
-
-// BIOS_7_SCRATCH Definition, BIOS_7_SCRATCH is used by Firmware only !!!!
-#define ATOM_S7_DOS_MODE_TYPEb0 0x03
-#define ATOM_S7_DOS_MODE_VGAb0 0x00
-#define ATOM_S7_DOS_MODE_VESAb0 0x01
-#define ATOM_S7_DOS_MODE_EXTb0 0x02
-#define ATOM_S7_DOS_MODE_PIXEL_DEPTHb0 0x0C
-#define ATOM_S7_DOS_MODE_PIXEL_FORMATb0 0xF0
-#define ATOM_S7_DOS_8BIT_DAC_ENb1 0x01
-#define ATOM_S7_DOS_MODE_NUMBERw1 0x0FFFF
-
-#define ATOM_S7_DOS_8BIT_DAC_EN_SHIFT 8
-
-// BIOS_8_SCRATCH Definition
-#define ATOM_S8_I2C_CHANNEL_BUSY_MASK 0x00000FFFF
-#define ATOM_S8_I2C_HW_ENGINE_BUSY_MASK 0x0FFFF0000
-
-#define ATOM_S8_I2C_CHANNEL_BUSY_SHIFT 0
-#define ATOM_S8_I2C_ENGINE_BUSY_SHIFT 16
-
-// BIOS_9_SCRATCH Definition
-#ifndef ATOM_S9_I2C_CHANNEL_COMPLETED_MASK
-#define ATOM_S9_I2C_CHANNEL_COMPLETED_MASK 0x0000FFFF
-#endif
-#ifndef ATOM_S9_I2C_CHANNEL_ABORTED_MASK
-#define ATOM_S9_I2C_CHANNEL_ABORTED_MASK 0xFFFF0000
-#endif
-#ifndef ATOM_S9_I2C_CHANNEL_COMPLETED_SHIFT
-#define ATOM_S9_I2C_CHANNEL_COMPLETED_SHIFT 0
-#endif
-#ifndef ATOM_S9_I2C_CHANNEL_ABORTED_SHIFT
-#define ATOM_S9_I2C_CHANNEL_ABORTED_SHIFT 16
-#endif
-
-
-#define ATOM_FLAG_SET 0x20
-#define ATOM_FLAG_CLEAR 0
-#define CLEAR_ATOM_S6_ACC_MODE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_ACC_MODE_SHIFT | ATOM_FLAG_CLEAR)
-#define SET_ATOM_S6_DEVICE_CHANGE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_DEVICE_CHANGE_SHIFT | ATOM_FLAG_SET)
-#define SET_ATOM_S6_VRI_BRIGHTNESS_CHANGE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_VRI_BRIGHTNESS_CHANGE_SHIFT | ATOM_FLAG_SET)
-#define SET_ATOM_S6_SCALER_CHANGE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_SCALER_CHANGE_SHIFT | ATOM_FLAG_SET)
-#define SET_ATOM_S6_LID_CHANGE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_LID_CHANGE_SHIFT | ATOM_FLAG_SET)
-
-#define SET_ATOM_S6_LID_STATE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_LID_STATE_SHIFT | ATOM_FLAG_SET)
-#define CLEAR_ATOM_S6_LID_STATE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_LID_STATE_SHIFT | ATOM_FLAG_CLEAR)
-
-#define SET_ATOM_S6_DOCK_CHANGE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_DOCKING_CHANGE_SHIFT | ATOM_FLAG_SET)
-#define SET_ATOM_S6_DOCK_STATE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_DOCK_STATE_SHIFT | ATOM_FLAG_SET)
-#define CLEAR_ATOM_S6_DOCK_STATE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_DOCK_STATE_SHIFT | ATOM_FLAG_CLEAR)
-
-#define SET_ATOM_S6_THERMAL_STATE_CHANGE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_THERMAL_STATE_CHANGE_SHIFT | ATOM_FLAG_SET)
-#define SET_ATOM_S6_SYSTEM_POWER_MODE_CHANGE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_SYSTEM_POWER_MODE_CHANGE_SHIFT | ATOM_FLAG_SET)
-#define SET_ATOM_S6_INTERRUPT_SET_BY_BIOS ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_INTERRUPT_SET_BY_BIOS_SHIFT | ATOM_FLAG_SET)
-
-#define SET_ATOM_S6_CRITICAL_STATE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_CRITICAL_STATE_SHIFT | ATOM_FLAG_SET)
-#define CLEAR_ATOM_S6_CRITICAL_STATE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_CRITICAL_STATE_SHIFT | ATOM_FLAG_CLEAR)
-
-#define SET_ATOM_S6_REQ_SCALER ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_REQ_SCALER_SHIFT | ATOM_FLAG_SET)
-#define CLEAR_ATOM_S6_REQ_SCALER ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_REQ_SCALER_SHIFT | ATOM_FLAG_CLEAR )
-
-#define SET_ATOM_S6_REQ_SCALER_ARATIO ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_REQ_SCALER_ARATIO_SHIFT | ATOM_FLAG_SET )
-#define CLEAR_ATOM_S6_REQ_SCALER_ARATIO ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_REQ_SCALER_ARATIO_SHIFT | ATOM_FLAG_CLEAR )
-
-#define SET_ATOM_S6_I2C_STATE_CHANGE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_I2C_STATE_CHANGE_SHIFT | ATOM_FLAG_SET )
-
-#define SET_ATOM_S6_DISPLAY_STATE_CHANGE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_DISPLAY_STATE_CHANGE_SHIFT | ATOM_FLAG_SET )
-
-#define SET_ATOM_S6_DEVICE_RECONFIG ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_CONFIG_DISPLAY_CHANGE_SHIFT | ATOM_FLAG_SET)
-#define CLEAR_ATOM_S0_LCD1 ((ATOM_DEVICE_CONNECT_INFO_DEF << 8 )| ATOM_S0_LCD1_SHIFT | ATOM_FLAG_CLEAR )
-#define SET_ATOM_S7_DOS_8BIT_DAC_EN ((ATOM_DOS_MODE_INFO_DEF << 8 )|ATOM_S7_DOS_8BIT_DAC_EN_SHIFT | ATOM_FLAG_SET )
-#define CLEAR_ATOM_S7_DOS_8BIT_DAC_EN ((ATOM_DOS_MODE_INFO_DEF << 8 )|ATOM_S7_DOS_8BIT_DAC_EN_SHIFT | ATOM_FLAG_CLEAR )
-
-/****************************************************************************/
-//Portion II: Definitinos only used in Driver
-/****************************************************************************/
-
-// Macros used by driver
-
-#define GetIndexIntoMasterTable(MasterOrData, FieldName) (((char*)(&((ATOM_MASTER_LIST_OF_##MasterOrData##_TABLES*)0)->FieldName)-(char*)0)/sizeof(USHORT))
-
-#define GET_COMMAND_TABLE_COMMANDSET_REVISION(TABLE_HEADER_OFFSET) ((((ATOM_COMMON_TABLE_HEADER*)TABLE_HEADER_OFFSET)->ucTableFormatRevision)&0x3F)
-#define GET_COMMAND_TABLE_PARAMETER_REVISION(TABLE_HEADER_OFFSET) ((((ATOM_COMMON_TABLE_HEADER*)TABLE_HEADER_OFFSET)->ucTableContentRevision)&0x3F)
-
-#define GET_DATA_TABLE_MAJOR_REVISION GET_COMMAND_TABLE_COMMANDSET_REVISION
-#define GET_DATA_TABLE_MINOR_REVISION GET_COMMAND_TABLE_PARAMETER_REVISION
-
-/****************************************************************************/
-//Portion III: Definitinos only used in VBIOS
-/****************************************************************************/
-#define ATOM_DAC_SRC 0x80
-#define ATOM_SRC_DAC1 0
-#define ATOM_SRC_DAC2 0x80
-
-
-#ifdef UEFI_BUILD
- #define USHORT UTEMP
-#endif
-
-typedef struct _MEMORY_PLLINIT_PARAMETERS
-{
- ULONG ulTargetMemoryClock; //In 10Khz unit
- UCHAR ucAction; //not define yet
- UCHAR ucFbDiv_Hi; //Fbdiv Hi byte
- UCHAR ucFbDiv; //FB value
- UCHAR ucPostDiv; //Post div
-}MEMORY_PLLINIT_PARAMETERS;
-
-#define MEMORY_PLLINIT_PS_ALLOCATION MEMORY_PLLINIT_PARAMETERS
-
-
-#define GPIO_PIN_WRITE 0x01
-#define GPIO_PIN_READ 0x00
-
-typedef struct _GPIO_PIN_CONTROL_PARAMETERS
-{
- UCHAR ucGPIO_ID; //return value, read from GPIO pins
- UCHAR ucGPIOBitShift; //define which bit in uGPIOBitVal need to be update
- UCHAR ucGPIOBitVal; //Set/Reset corresponding bit defined in ucGPIOBitMask
- UCHAR ucAction; //=GPIO_PIN_WRITE: Read; =GPIO_PIN_READ: Write
-}GPIO_PIN_CONTROL_PARAMETERS;
-
-typedef struct _ENABLE_SCALER_PARAMETERS
-{
- UCHAR ucScaler; // ATOM_SCALER1, ATOM_SCALER2
- UCHAR ucEnable; // ATOM_SCALER_DISABLE or ATOM_SCALER_CENTER or ATOM_SCALER_EXPANSION
- UCHAR ucTVStandard; //
- UCHAR ucPadding[1];
-}ENABLE_SCALER_PARAMETERS;
-#define ENABLE_SCALER_PS_ALLOCATION ENABLE_SCALER_PARAMETERS
-
-//ucEnable:
-#define SCALER_BYPASS_AUTO_CENTER_NO_REPLICATION 0
-#define SCALER_BYPASS_AUTO_CENTER_AUTO_REPLICATION 1
-#define SCALER_ENABLE_2TAP_ALPHA_MODE 2
-#define SCALER_ENABLE_MULTITAP_MODE 3
-
-typedef struct _ENABLE_HARDWARE_ICON_CURSOR_PARAMETERS
-{
- ULONG usHWIconHorzVertPosn; // Hardware Icon Vertical position
- UCHAR ucHWIconVertOffset; // Hardware Icon Vertical offset
- UCHAR ucHWIconHorzOffset; // Hardware Icon Horizontal offset
- UCHAR ucSelection; // ATOM_CURSOR1 or ATOM_ICON1 or ATOM_CURSOR2 or ATOM_ICON2
- UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE
-}ENABLE_HARDWARE_ICON_CURSOR_PARAMETERS;
-
-typedef struct _ENABLE_HARDWARE_ICON_CURSOR_PS_ALLOCATION
-{
- ENABLE_HARDWARE_ICON_CURSOR_PARAMETERS sEnableIcon;
- ENABLE_CRTC_PARAMETERS sReserved;
-}ENABLE_HARDWARE_ICON_CURSOR_PS_ALLOCATION;
-
-typedef struct _ENABLE_GRAPH_SURFACE_PARAMETERS
-{
- USHORT usHight; // Image Hight
- USHORT usWidth; // Image Width
- UCHAR ucSurface; // Surface 1 or 2
- UCHAR ucPadding[3];
-}ENABLE_GRAPH_SURFACE_PARAMETERS;
-
-typedef struct _ENABLE_GRAPH_SURFACE_PARAMETERS_V1_2
-{
- USHORT usHight; // Image Hight
- USHORT usWidth; // Image Width
- UCHAR ucSurface; // Surface 1 or 2
- UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE
- UCHAR ucPadding[2];
-}ENABLE_GRAPH_SURFACE_PARAMETERS_V1_2;
-
-typedef struct _ENABLE_GRAPH_SURFACE_PS_ALLOCATION
-{
- ENABLE_GRAPH_SURFACE_PARAMETERS sSetSurface;
- ENABLE_YUV_PS_ALLOCATION sReserved; // Don't set this one
-}ENABLE_GRAPH_SURFACE_PS_ALLOCATION;
-
-typedef struct _MEMORY_CLEAN_UP_PARAMETERS
-{
- USHORT usMemoryStart; //in 8Kb boundry, offset from memory base address
- USHORT usMemorySize; //8Kb blocks aligned
-}MEMORY_CLEAN_UP_PARAMETERS;
-#define MEMORY_CLEAN_UP_PS_ALLOCATION MEMORY_CLEAN_UP_PARAMETERS
-
-typedef struct _GET_DISPLAY_SURFACE_SIZE_PARAMETERS
-{
- USHORT usX_Size; //When use as input parameter, usX_Size indicates which CRTC
- USHORT usY_Size;
-}GET_DISPLAY_SURFACE_SIZE_PARAMETERS;
-
-typedef struct _INDIRECT_IO_ACCESS
-{
- ATOM_COMMON_TABLE_HEADER sHeader;
- UCHAR IOAccessSequence[256];
-} INDIRECT_IO_ACCESS;
-
-#define INDIRECT_READ 0x00
-#define INDIRECT_WRITE 0x80
-
-#define INDIRECT_IO_MM 0
-#define INDIRECT_IO_PLL 1
-#define INDIRECT_IO_MC 2
-#define INDIRECT_IO_PCIE 3
-#define INDIRECT_IO_PCIEP 4
-#define INDIRECT_IO_NBMISC 5
-
-#define INDIRECT_IO_PLL_READ INDIRECT_IO_PLL | INDIRECT_READ
-#define INDIRECT_IO_PLL_WRITE INDIRECT_IO_PLL | INDIRECT_WRITE
-#define INDIRECT_IO_MC_READ INDIRECT_IO_MC | INDIRECT_READ
-#define INDIRECT_IO_MC_WRITE INDIRECT_IO_MC | INDIRECT_WRITE
-#define INDIRECT_IO_PCIE_READ INDIRECT_IO_PCIE | INDIRECT_READ
-#define INDIRECT_IO_PCIE_WRITE INDIRECT_IO_PCIE | INDIRECT_WRITE
-#define INDIRECT_IO_PCIEP_READ INDIRECT_IO_PCIEP | INDIRECT_READ
-#define INDIRECT_IO_PCIEP_WRITE INDIRECT_IO_PCIEP | INDIRECT_WRITE
-#define INDIRECT_IO_NBMISC_READ INDIRECT_IO_NBMISC | INDIRECT_READ
-#define INDIRECT_IO_NBMISC_WRITE INDIRECT_IO_NBMISC | INDIRECT_WRITE
-
-typedef struct _ATOM_OEM_INFO
-{
- ATOM_COMMON_TABLE_HEADER sHeader;
- ATOM_I2C_ID_CONFIG_ACCESS sucI2cId;
-}ATOM_OEM_INFO;
-
-typedef struct _ATOM_TV_MODE
-{
- UCHAR ucVMode_Num; //Video mode number
- UCHAR ucTV_Mode_Num; //Internal TV mode number
-}ATOM_TV_MODE;
-
-typedef struct _ATOM_BIOS_INT_TVSTD_MODE
-{
- ATOM_COMMON_TABLE_HEADER sHeader;
- USHORT usTV_Mode_LUT_Offset; // Pointer to standard to internal number conversion table
- USHORT usTV_FIFO_Offset; // Pointer to FIFO entry table
- USHORT usNTSC_Tbl_Offset; // Pointer to SDTV_Mode_NTSC table
- USHORT usPAL_Tbl_Offset; // Pointer to SDTV_Mode_PAL table
- USHORT usCV_Tbl_Offset; // Pointer to SDTV_Mode_PAL table
-}ATOM_BIOS_INT_TVSTD_MODE;
-
-
-typedef struct _ATOM_TV_MODE_SCALER_PTR
-{
- USHORT ucFilter0_Offset; //Pointer to filter format 0 coefficients
- USHORT usFilter1_Offset; //Pointer to filter format 0 coefficients
- UCHAR ucTV_Mode_Num;
-}ATOM_TV_MODE_SCALER_PTR;
-
-typedef struct _ATOM_STANDARD_VESA_TIMING
-{
- ATOM_COMMON_TABLE_HEADER sHeader;
- ATOM_DTD_FORMAT aModeTimings[16]; // 16 is not the real array number, just for initial allocation
-}ATOM_STANDARD_VESA_TIMING;
-
-
-typedef struct _ATOM_STD_FORMAT
-{
- USHORT usSTD_HDisp;
- USHORT usSTD_VDisp;
- USHORT usSTD_RefreshRate;
- USHORT usReserved;
-}ATOM_STD_FORMAT;
-
-typedef struct _ATOM_VESA_TO_EXTENDED_MODE
-{
- USHORT usVESA_ModeNumber;
- USHORT usExtendedModeNumber;
-}ATOM_VESA_TO_EXTENDED_MODE;
-
-typedef struct _ATOM_VESA_TO_INTENAL_MODE_LUT
-{
- ATOM_COMMON_TABLE_HEADER sHeader;
- ATOM_VESA_TO_EXTENDED_MODE asVESA_ToExtendedModeInfo[76];
-}ATOM_VESA_TO_INTENAL_MODE_LUT;
-
-/*************** ATOM Memory Related Data Structure ***********************/
-typedef struct _ATOM_MEMORY_VENDOR_BLOCK{
- UCHAR ucMemoryType;
- UCHAR ucMemoryVendor;
- UCHAR ucAdjMCId;
- UCHAR ucDynClkId;
- ULONG ulDllResetClkRange;
-}ATOM_MEMORY_VENDOR_BLOCK;
-
-
-typedef struct _ATOM_MEMORY_SETTING_ID_CONFIG{
-#if ATOM_BIG_ENDIAN
- ULONG ucMemBlkId:8;
- ULONG ulMemClockRange:24;
-#else
- ULONG ulMemClockRange:24;
- ULONG ucMemBlkId:8;
-#endif
-}ATOM_MEMORY_SETTING_ID_CONFIG;
-
-typedef union _ATOM_MEMORY_SETTING_ID_CONFIG_ACCESS
-{
- ATOM_MEMORY_SETTING_ID_CONFIG slAccess;
- ULONG ulAccess;
-}ATOM_MEMORY_SETTING_ID_CONFIG_ACCESS;
-
-
-typedef struct _ATOM_MEMORY_SETTING_DATA_BLOCK{
- ATOM_MEMORY_SETTING_ID_CONFIG_ACCESS ulMemoryID;
- ULONG aulMemData[1];
-}ATOM_MEMORY_SETTING_DATA_BLOCK;
-
-
-typedef struct _ATOM_INIT_REG_INDEX_FORMAT{
- USHORT usRegIndex; // MC register index
- UCHAR ucPreRegDataLength; // offset in ATOM_INIT_REG_DATA_BLOCK.saRegDataBuf
-}ATOM_INIT_REG_INDEX_FORMAT;
-
-
-typedef struct _ATOM_INIT_REG_BLOCK{
- USHORT usRegIndexTblSize; //size of asRegIndexBuf
- USHORT usRegDataBlkSize; //size of ATOM_MEMORY_SETTING_DATA_BLOCK
- ATOM_INIT_REG_INDEX_FORMAT asRegIndexBuf[1];
- ATOM_MEMORY_SETTING_DATA_BLOCK asRegDataBuf[1];
-}ATOM_INIT_REG_BLOCK;
-
-#define END_OF_REG_INDEX_BLOCK 0x0ffff
-#define END_OF_REG_DATA_BLOCK 0x00000000
-#define ATOM_INIT_REG_MASK_FLAG 0x80
-#define CLOCK_RANGE_HIGHEST 0x00ffffff
-
-#define VALUE_DWORD SIZEOF ULONG
-#define VALUE_SAME_AS_ABOVE 0
-#define VALUE_MASK_DWORD 0x84
-
-#define INDEX_ACCESS_RANGE_BEGIN (VALUE_DWORD + 1)
-#define INDEX_ACCESS_RANGE_END (INDEX_ACCESS_RANGE_BEGIN + 1)
-#define VALUE_INDEX_ACCESS_SINGLE (INDEX_ACCESS_RANGE_END + 1)
-
-
-typedef struct _ATOM_MC_INIT_PARAM_TABLE
-{
- ATOM_COMMON_TABLE_HEADER sHeader;
- USHORT usAdjustARB_SEQDataOffset;
- USHORT usMCInitMemTypeTblOffset;
- USHORT usMCInitCommonTblOffset;
- USHORT usMCInitPowerDownTblOffset;
- ULONG ulARB_SEQDataBuf[32];
- ATOM_INIT_REG_BLOCK asMCInitMemType;
- ATOM_INIT_REG_BLOCK asMCInitCommon;
-}ATOM_MC_INIT_PARAM_TABLE;
-
-
-#define _4Mx16 0x2
-#define _4Mx32 0x3
-#define _8Mx16 0x12
-#define _8Mx32 0x13
-#define _16Mx16 0x22
-#define _16Mx32 0x23
-#define _32Mx16 0x32
-#define _32Mx32 0x33
-#define _64Mx8 0x41
-#define _64Mx16 0x42
-
-#define SAMSUNG 0x1
-#define INFINEON 0x2
-#define ELPIDA 0x3
-#define ETRON 0x4
-#define NANYA 0x5
-#define HYNIX 0x6
-#define MOSEL 0x7
-#define WINBOND 0x8
-#define ESMT 0x9
-#define MICRON 0xF
-
-#define QIMONDA INFINEON
-#define PROMOS MOSEL
-
-/////////////Support for GDDR5 MC uCode to reside in upper 64K of ROM/////////////
-
-#define UCODE_ROM_START_ADDRESS 0x1c000
-#define UCODE_SIGNATURE 0x4375434d // 'MCuC' - MC uCode
-
-//uCode block header for reference
-
-typedef struct _MCuCodeHeader
-{
- ULONG ulSignature;
- UCHAR ucRevision;
- UCHAR ucChecksum;
- UCHAR ucReserved1;
- UCHAR ucReserved2;
- USHORT usParametersLength;
- USHORT usUCodeLength;
- USHORT usReserved1;
- USHORT usReserved2;
-} MCuCodeHeader;
-
-//////////////////////////////////////////////////////////////////////////////////
-
-#define ATOM_MAX_NUMBER_OF_VRAM_MODULE 16
-
-#define ATOM_VRAM_MODULE_MEMORY_VENDOR_ID_MASK 0xF
-typedef struct _ATOM_VRAM_MODULE_V1
-{
- ULONG ulReserved;
- USHORT usEMRSValue;
- USHORT usMRSValue;
- USHORT usReserved;
- UCHAR ucExtMemoryID; // An external indicator (by hardcode, callback or pin) to tell what is the current memory module
- UCHAR ucMemoryType; // [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4;[3:0] reserved;
- UCHAR ucMemoryVenderID; // Predefined,never change across designs or memory type/vender
- UCHAR ucMemoryDeviceCfg; // [7:4]=0x0:4M;=0x1:8M;=0x2:16M;0x3:32M....[3:0]=0x0:x4;=0x1:x8;=0x2:x16;=0x3:x32...
- UCHAR ucRow; // Number of Row,in power of 2;
- UCHAR ucColumn; // Number of Column,in power of 2;
- UCHAR ucBank; // Nunber of Bank;
- UCHAR ucRank; // Number of Rank, in power of 2
- UCHAR ucChannelNum; // Number of channel;
- UCHAR ucChannelConfig; // [3:0]=Indication of what channel combination;[4:7]=Channel bit width, in number of 2
- UCHAR ucDefaultMVDDQ_ID; // Default MVDDQ setting for this memory block, ID linking to MVDDQ info table to find real set-up data;
- UCHAR ucDefaultMVDDC_ID; // Default MVDDC setting for this memory block, ID linking to MVDDC info table to find real set-up data;
- UCHAR ucReserved[2];
-}ATOM_VRAM_MODULE_V1;
-
-
-typedef struct _ATOM_VRAM_MODULE_V2
-{
- ULONG ulReserved;
- ULONG ulFlags; // To enable/disable functionalities based on memory type
- ULONG ulEngineClock; // Override of default engine clock for particular memory type
- ULONG ulMemoryClock; // Override of default memory clock for particular memory type
- USHORT usEMRS2Value; // EMRS2 Value is used for GDDR2 and GDDR4 memory type
- USHORT usEMRS3Value; // EMRS3 Value is used for GDDR2 and GDDR4 memory type
- USHORT usEMRSValue;
- USHORT usMRSValue;
- USHORT usReserved;
- UCHAR ucExtMemoryID; // An external indicator (by hardcode, callback or pin) to tell what is the current memory module
- UCHAR ucMemoryType; // [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4;[3:0] - must not be used for now;
- UCHAR ucMemoryVenderID; // Predefined,never change across designs or memory type/vender. If not predefined, vendor detection table gets executed
- UCHAR ucMemoryDeviceCfg; // [7:4]=0x0:4M;=0x1:8M;=0x2:16M;0x3:32M....[3:0]=0x0:x4;=0x1:x8;=0x2:x16;=0x3:x32...
- UCHAR ucRow; // Number of Row,in power of 2;
- UCHAR ucColumn; // Number of Column,in power of 2;
- UCHAR ucBank; // Nunber of Bank;
- UCHAR ucRank; // Number of Rank, in power of 2
- UCHAR ucChannelNum; // Number of channel;
- UCHAR ucChannelConfig; // [3:0]=Indication of what channel combination;[4:7]=Channel bit width, in number of 2
- UCHAR ucDefaultMVDDQ_ID; // Default MVDDQ setting for this memory block, ID linking to MVDDQ info table to find real set-up data;
- UCHAR ucDefaultMVDDC_ID; // Default MVDDC setting for this memory block, ID linking to MVDDC info table to find real set-up data;
- UCHAR ucRefreshRateFactor;
- UCHAR ucReserved[3];
-}ATOM_VRAM_MODULE_V2;
-
-
-typedef struct _ATOM_MEMORY_TIMING_FORMAT
-{
- ULONG ulClkRange; // memory clock in 10kHz unit, when target memory clock is below this clock, use this memory timing
- union{
- USHORT usMRS; // mode register
- USHORT usDDR3_MR0;
- };
- union{
- USHORT usEMRS; // extended mode register
- USHORT usDDR3_MR1;
- };
- UCHAR ucCL; // CAS latency
- UCHAR ucWL; // WRITE Latency
- UCHAR uctRAS; // tRAS
- UCHAR uctRC; // tRC
- UCHAR uctRFC; // tRFC
- UCHAR uctRCDR; // tRCDR
- UCHAR uctRCDW; // tRCDW
- UCHAR uctRP; // tRP
- UCHAR uctRRD; // tRRD
- UCHAR uctWR; // tWR
- UCHAR uctWTR; // tWTR
- UCHAR uctPDIX; // tPDIX
- UCHAR uctFAW; // tFAW
- UCHAR uctAOND; // tAOND
- union
- {
- struct {
- UCHAR ucflag; // flag to control memory timing calculation. bit0= control EMRS2 Infineon
- UCHAR ucReserved;
- };
- USHORT usDDR3_MR2;
- };
-}ATOM_MEMORY_TIMING_FORMAT;
-
-
-typedef struct _ATOM_MEMORY_TIMING_FORMAT_V1
-{
- ULONG ulClkRange; // memory clock in 10kHz unit, when target memory clock is below this clock, use this memory timing
- USHORT usMRS; // mode register
- USHORT usEMRS; // extended mode register
- UCHAR ucCL; // CAS latency
- UCHAR ucWL; // WRITE Latency
- UCHAR uctRAS; // tRAS
- UCHAR uctRC; // tRC
- UCHAR uctRFC; // tRFC
- UCHAR uctRCDR; // tRCDR
- UCHAR uctRCDW; // tRCDW
- UCHAR uctRP; // tRP
- UCHAR uctRRD; // tRRD
- UCHAR uctWR; // tWR
- UCHAR uctWTR; // tWTR
- UCHAR uctPDIX; // tPDIX
- UCHAR uctFAW; // tFAW
- UCHAR uctAOND; // tAOND
- UCHAR ucflag; // flag to control memory timing calculation. bit0= control EMRS2 Infineon
-////////////////////////////////////GDDR parameters///////////////////////////////////
- UCHAR uctCCDL; //
- UCHAR uctCRCRL; //
- UCHAR uctCRCWL; //
- UCHAR uctCKE; //
- UCHAR uctCKRSE; //
- UCHAR uctCKRSX; //
- UCHAR uctFAW32; //
- UCHAR ucReserved1; //
- UCHAR ucReserved2; //
- UCHAR ucTerminator;
-}ATOM_MEMORY_TIMING_FORMAT_V1;
-
-
-typedef struct _ATOM_MEMORY_FORMAT
-{
- ULONG ulDllDisClock; // memory DLL will be disable when target memory clock is below this clock
- union{
- USHORT usEMRS2Value; // EMRS2 Value is used for GDDR2 and GDDR4 memory type
- USHORT usDDR3_Reserved; // Not used for DDR3 memory
- };
- union{
- USHORT usEMRS3Value; // EMRS3 Value is used for GDDR2 and GDDR4 memory type
- USHORT usDDR3_MR3; // Used for DDR3 memory
- };
- UCHAR ucMemoryType; // [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4;[3:0] - must not be used for now;
- UCHAR ucMemoryVenderID; // Predefined,never change across designs or memory type/vender. If not predefined, vendor detection table gets executed
- UCHAR ucRow; // Number of Row,in power of 2;
- UCHAR ucColumn; // Number of Column,in power of 2;
- UCHAR ucBank; // Nunber of Bank;
- UCHAR ucRank; // Number of Rank, in power of 2
- UCHAR ucBurstSize; // burst size, 0= burst size=4 1= burst size=8
- UCHAR ucDllDisBit; // position of DLL Enable/Disable bit in EMRS ( Extended Mode Register )
- UCHAR ucRefreshRateFactor; // memory refresh rate in unit of ms
- UCHAR ucDensity; // _8Mx32, _16Mx32, _16Mx16, _32Mx16
- UCHAR ucPreamble; //[7:4] Write Preamble, [3:0] Read Preamble
- UCHAR ucMemAttrib; // Memory Device Addribute, like RDBI/WDBI etc
- ATOM_MEMORY_TIMING_FORMAT asMemTiming[5]; //Memory Timing block sort from lower clock to higher clock
-}ATOM_MEMORY_FORMAT;
-
-
-typedef struct _ATOM_VRAM_MODULE_V3
-{
- ULONG ulChannelMapCfg; // board dependent paramenter:Channel combination
- USHORT usSize; // size of ATOM_VRAM_MODULE_V3
- USHORT usDefaultMVDDQ; // board dependent parameter:Default Memory Core Voltage
- USHORT usDefaultMVDDC; // board dependent parameter:Default Memory IO Voltage
- UCHAR ucExtMemoryID; // An external indicator (by hardcode, callback or pin) to tell what is the current memory module
- UCHAR ucChannelNum; // board dependent parameter:Number of channel;
- UCHAR ucChannelSize; // board dependent parameter:32bit or 64bit
- UCHAR ucVREFI; // board dependnt parameter: EXT or INT +160mv to -140mv
- UCHAR ucNPL_RT; // board dependent parameter:NPL round trip delay, used for calculate memory timing parameters
- UCHAR ucFlag; // To enable/disable functionalities based on memory type
- ATOM_MEMORY_FORMAT asMemory; // describ all of video memory parameters from memory spec
-}ATOM_VRAM_MODULE_V3;
-
-
-//ATOM_VRAM_MODULE_V3.ucNPL_RT
-#define NPL_RT_MASK 0x0f
-#define BATTERY_ODT_MASK 0xc0
-
-#define ATOM_VRAM_MODULE ATOM_VRAM_MODULE_V3
-
-typedef struct _ATOM_VRAM_MODULE_V4
-{
- ULONG ulChannelMapCfg; // board dependent parameter: Channel combination
- USHORT usModuleSize; // size of ATOM_VRAM_MODULE_V4, make it easy for VBIOS to look for next entry of VRAM_MODULE
- USHORT usPrivateReserved; // BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!!
- // MC_ARB_RAMCFG (includes NOOFBANK,NOOFRANKS,NOOFROWS,NOOFCOLS)
- USHORT usReserved;
- UCHAR ucExtMemoryID; // An external indicator (by hardcode, callback or pin) to tell what is the current memory module
- UCHAR ucMemoryType; // [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4; 0x5:DDR5 [3:0] - Must be 0x0 for now;
- UCHAR ucChannelNum; // Number of channels present in this module config
- UCHAR ucChannelWidth; // 0 - 32 bits; 1 - 64 bits
- UCHAR ucDensity; // _8Mx32, _16Mx32, _16Mx16, _32Mx16
- UCHAR ucFlag; // To enable/disable functionalities based on memory type
- UCHAR ucMisc; // bit0: 0 - single rank; 1 - dual rank; bit2: 0 - burstlength 4, 1 - burstlength 8
- UCHAR ucVREFI; // board dependent parameter
- UCHAR ucNPL_RT; // board dependent parameter:NPL round trip delay, used for calculate memory timing parameters
- UCHAR ucPreamble; // [7:4] Write Preamble, [3:0] Read Preamble
- UCHAR ucMemorySize; // BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!!
- // Total memory size in unit of 16MB for CONFIG_MEMSIZE - bit[23:0] zeros
- UCHAR ucReserved[3];
-
-//compare with V3, we flat the struct by merging ATOM_MEMORY_FORMAT (as is) into V4 as the same level
- union{
- USHORT usEMRS2Value; // EMRS2 Value is used for GDDR2 and GDDR4 memory type
- USHORT usDDR3_Reserved;
- };
- union{
- USHORT usEMRS3Value; // EMRS3 Value is used for GDDR2 and GDDR4 memory type
- USHORT usDDR3_MR3; // Used for DDR3 memory
- };
- UCHAR ucMemoryVenderID; // Predefined, If not predefined, vendor detection table gets executed
- UCHAR ucRefreshRateFactor; // [1:0]=RefreshFactor (00=8ms, 01=16ms, 10=32ms,11=64ms)
- UCHAR ucReserved2[2];
- ATOM_MEMORY_TIMING_FORMAT asMemTiming[5];//Memory Timing block sort from lower clock to higher clock
-}ATOM_VRAM_MODULE_V4;
-
-#define VRAM_MODULE_V4_MISC_RANK_MASK 0x3
-#define VRAM_MODULE_V4_MISC_DUAL_RANK 0x1
-#define VRAM_MODULE_V4_MISC_BL_MASK 0x4
-#define VRAM_MODULE_V4_MISC_BL8 0x4
-#define VRAM_MODULE_V4_MISC_DUAL_CS 0x10
-
-typedef struct _ATOM_VRAM_MODULE_V5
-{
- ULONG ulChannelMapCfg; // board dependent parameter: Channel combination
- USHORT usModuleSize; // size of ATOM_VRAM_MODULE_V4, make it easy for VBIOS to look for next entry of VRAM_MODULE
- USHORT usPrivateReserved; // BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!!
- // MC_ARB_RAMCFG (includes NOOFBANK,NOOFRANKS,NOOFROWS,NOOFCOLS)
- USHORT usReserved;
- UCHAR ucExtMemoryID; // An external indicator (by hardcode, callback or pin) to tell what is the current memory module
- UCHAR ucMemoryType; // [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4; 0x5:DDR5 [3:0] - Must be 0x0 for now;
- UCHAR ucChannelNum; // Number of channels present in this module config
- UCHAR ucChannelWidth; // 0 - 32 bits; 1 - 64 bits
- UCHAR ucDensity; // _8Mx32, _16Mx32, _16Mx16, _32Mx16
- UCHAR ucFlag; // To enable/disable functionalities based on memory type
- UCHAR ucMisc; // bit0: 0 - single rank; 1 - dual rank; bit2: 0 - burstlength 4, 1 - burstlength 8
- UCHAR ucVREFI; // board dependent parameter
- UCHAR ucNPL_RT; // board dependent parameter:NPL round trip delay, used for calculate memory timing parameters
- UCHAR ucPreamble; // [7:4] Write Preamble, [3:0] Read Preamble
- UCHAR ucMemorySize; // BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!!
- // Total memory size in unit of 16MB for CONFIG_MEMSIZE - bit[23:0] zeros
- UCHAR ucReserved[3];
-
-//compare with V3, we flat the struct by merging ATOM_MEMORY_FORMAT (as is) into V4 as the same level
- USHORT usEMRS2Value; // EMRS2 Value is used for GDDR2 and GDDR4 memory type
- USHORT usEMRS3Value; // EMRS3 Value is used for GDDR2 and GDDR4 memory type
- UCHAR ucMemoryVenderID; // Predefined, If not predefined, vendor detection table gets executed
- UCHAR ucRefreshRateFactor; // [1:0]=RefreshFactor (00=8ms, 01=16ms, 10=32ms,11=64ms)
- UCHAR ucFIFODepth; // FIFO depth supposes to be detected during vendor detection, but if we dont do vendor detection we have to hardcode FIFO Depth
- UCHAR ucCDR_Bandwidth; // [0:3]=Read CDR bandwidth, [4:7] - Write CDR Bandwidth
- ATOM_MEMORY_TIMING_FORMAT_V1 asMemTiming[5];//Memory Timing block sort from lower clock to higher clock
-}ATOM_VRAM_MODULE_V5;
-
-typedef struct _ATOM_VRAM_INFO_V2
-{
- ATOM_COMMON_TABLE_HEADER sHeader;
- UCHAR ucNumOfVRAMModule;
- ATOM_VRAM_MODULE aVramInfo[ATOM_MAX_NUMBER_OF_VRAM_MODULE]; // just for allocation, real number of blocks is in ucNumOfVRAMModule;
-}ATOM_VRAM_INFO_V2;
-
-typedef struct _ATOM_VRAM_INFO_V3
-{
- ATOM_COMMON_TABLE_HEADER sHeader;
- USHORT usMemAdjustTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory vendor specific MC adjust setting
- USHORT usMemClkPatchTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory clock specific MC setting
- USHORT usRerseved;
- UCHAR aVID_PinsShift[9]; // 8 bit strap maximum+terminator
- UCHAR ucNumOfVRAMModule;
- ATOM_VRAM_MODULE aVramInfo[ATOM_MAX_NUMBER_OF_VRAM_MODULE]; // just for allocation, real number of blocks is in ucNumOfVRAMModule;
- ATOM_INIT_REG_BLOCK asMemPatch; // for allocation
- // ATOM_INIT_REG_BLOCK aMemAdjust;
-}ATOM_VRAM_INFO_V3;
-
-#define ATOM_VRAM_INFO_LAST ATOM_VRAM_INFO_V3
-
-typedef struct _ATOM_VRAM_INFO_V4
-{
- ATOM_COMMON_TABLE_HEADER sHeader;
- USHORT usMemAdjustTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory vendor specific MC adjust setting
- USHORT usMemClkPatchTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory clock specific MC setting
- USHORT usRerseved;
- UCHAR ucMemDQ7_0ByteRemap; // DQ line byte remap, =0: Memory Data line BYTE0, =1: BYTE1, =2: BYTE2, =3: BYTE3
- ULONG ulMemDQ7_0BitRemap; // each DQ line ( 7~0) use 3bits, like: DQ0=Bit[2:0], DQ1:[5:3], ... DQ7:[23:21]
- UCHAR ucReservde[4];
- UCHAR ucNumOfVRAMModule;
- ATOM_VRAM_MODULE_V4 aVramInfo[ATOM_MAX_NUMBER_OF_VRAM_MODULE]; // just for allocation, real number of blocks is in ucNumOfVRAMModule;
- ATOM_INIT_REG_BLOCK asMemPatch; // for allocation
- // ATOM_INIT_REG_BLOCK aMemAdjust;
-}ATOM_VRAM_INFO_V4;
-
-typedef struct _ATOM_VRAM_GPIO_DETECTION_INFO
-{
- ATOM_COMMON_TABLE_HEADER sHeader;
- UCHAR aVID_PinsShift[9]; //8 bit strap maximum+terminator
-}ATOM_VRAM_GPIO_DETECTION_INFO;
-
-
-typedef struct _ATOM_MEMORY_TRAINING_INFO
-{
- ATOM_COMMON_TABLE_HEADER sHeader;
- UCHAR ucTrainingLoop;
- UCHAR ucReserved[3];
- ATOM_INIT_REG_BLOCK asMemTrainingSetting;
-}ATOM_MEMORY_TRAINING_INFO;
-
-
-typedef struct SW_I2C_CNTL_DATA_PARAMETERS
-{
- UCHAR ucControl;
- UCHAR ucData;
- UCHAR ucSatus;
- UCHAR ucTemp;
-} SW_I2C_CNTL_DATA_PARAMETERS;
-
-#define SW_I2C_CNTL_DATA_PS_ALLOCATION SW_I2C_CNTL_DATA_PARAMETERS
-
-typedef struct _SW_I2C_IO_DATA_PARAMETERS
-{
- USHORT GPIO_Info;
- UCHAR ucAct;
- UCHAR ucData;
- } SW_I2C_IO_DATA_PARAMETERS;
-
-#define SW_I2C_IO_DATA_PS_ALLOCATION SW_I2C_IO_DATA_PARAMETERS
-
-/****************************SW I2C CNTL DEFINITIONS**********************/
-#define SW_I2C_IO_RESET 0
-#define SW_I2C_IO_GET 1
-#define SW_I2C_IO_DRIVE 2
-#define SW_I2C_IO_SET 3
-#define SW_I2C_IO_START 4
-
-#define SW_I2C_IO_CLOCK 0
-#define SW_I2C_IO_DATA 0x80
-
-#define SW_I2C_IO_ZERO 0
-#define SW_I2C_IO_ONE 0x100
-
-#define SW_I2C_CNTL_READ 0
-#define SW_I2C_CNTL_WRITE 1
-#define SW_I2C_CNTL_START 2
-#define SW_I2C_CNTL_STOP 3
-#define SW_I2C_CNTL_OPEN 4
-#define SW_I2C_CNTL_CLOSE 5
-#define SW_I2C_CNTL_WRITE1BIT 6
-
-//==============================VESA definition Portion===============================
-#define VESA_OEM_PRODUCT_REV '01.00'
-#define VESA_MODE_ATTRIBUTE_MODE_SUPPORT 0xBB //refer to VBE spec p.32, no TTY support
-#define VESA_MODE_WIN_ATTRIBUTE 7
-#define VESA_WIN_SIZE 64
-
-typedef struct _PTR_32_BIT_STRUCTURE
-{
- USHORT Offset16;
- USHORT Segment16;
-} PTR_32_BIT_STRUCTURE;
-
-typedef union _PTR_32_BIT_UNION
-{
- PTR_32_BIT_STRUCTURE SegmentOffset;
- ULONG Ptr32_Bit;
-} PTR_32_BIT_UNION;
-
-typedef struct _VBE_1_2_INFO_BLOCK_UPDATABLE
-{
- UCHAR VbeSignature[4];
- USHORT VbeVersion;
- PTR_32_BIT_UNION OemStringPtr;
- UCHAR Capabilities[4];
- PTR_32_BIT_UNION VideoModePtr;
- USHORT TotalMemory;
-} VBE_1_2_INFO_BLOCK_UPDATABLE;
-
-
-typedef struct _VBE_2_0_INFO_BLOCK_UPDATABLE
-{
- VBE_1_2_INFO_BLOCK_UPDATABLE CommonBlock;
- USHORT OemSoftRev;
- PTR_32_BIT_UNION OemVendorNamePtr;
- PTR_32_BIT_UNION OemProductNamePtr;
- PTR_32_BIT_UNION OemProductRevPtr;
-} VBE_2_0_INFO_BLOCK_UPDATABLE;
-
-typedef union _VBE_VERSION_UNION
-{
- VBE_2_0_INFO_BLOCK_UPDATABLE VBE_2_0_InfoBlock;
- VBE_1_2_INFO_BLOCK_UPDATABLE VBE_1_2_InfoBlock;
-} VBE_VERSION_UNION;
-
-typedef struct _VBE_INFO_BLOCK
-{
- VBE_VERSION_UNION UpdatableVBE_Info;
- UCHAR Reserved[222];
- UCHAR OemData[256];
-} VBE_INFO_BLOCK;
-
-typedef struct _VBE_FP_INFO
-{
- USHORT HSize;
- USHORT VSize;
- USHORT FPType;
- UCHAR RedBPP;
- UCHAR GreenBPP;
- UCHAR BlueBPP;
- UCHAR ReservedBPP;
- ULONG RsvdOffScrnMemSize;
- ULONG RsvdOffScrnMEmPtr;
- UCHAR Reserved[14];
-} VBE_FP_INFO;
-
-typedef struct _VESA_MODE_INFO_BLOCK
-{
-// Mandatory information for all VBE revisions
- USHORT ModeAttributes; // dw ? ; mode attributes
- UCHAR WinAAttributes; // db ? ; window A attributes
- UCHAR WinBAttributes; // db ? ; window B attributes
- USHORT WinGranularity; // dw ? ; window granularity
- USHORT WinSize; // dw ? ; window size
- USHORT WinASegment; // dw ? ; window A start segment
- USHORT WinBSegment; // dw ? ; window B start segment
- ULONG WinFuncPtr; // dd ? ; real mode pointer to window function
- USHORT BytesPerScanLine;// dw ? ; bytes per scan line
-
-//; Mandatory information for VBE 1.2 and above
- USHORT XResolution; // dw ? ; horizontal resolution in pixels or characters
- USHORT YResolution; // dw ? ; vertical resolution in pixels or characters
- UCHAR XCharSize; // db ? ; character cell width in pixels
- UCHAR YCharSize; // db ? ; character cell height in pixels
- UCHAR NumberOfPlanes; // db ? ; number of memory planes
- UCHAR BitsPerPixel; // db ? ; bits per pixel
- UCHAR NumberOfBanks; // db ? ; number of banks
- UCHAR MemoryModel; // db ? ; memory model type
- UCHAR BankSize; // db ? ; bank size in KB
- UCHAR NumberOfImagePages;// db ? ; number of images
- UCHAR ReservedForPageFunction;//db 1 ; reserved for page function
-
-//; Direct Color fields(required for direct/6 and YUV/7 memory models)
- UCHAR RedMaskSize; // db ? ; size of direct color red mask in bits
- UCHAR RedFieldPosition; // db ? ; bit position of lsb of red mask
- UCHAR GreenMaskSize; // db ? ; size of direct color green mask in bits
- UCHAR GreenFieldPosition; // db ? ; bit position of lsb of green mask
- UCHAR BlueMaskSize; // db ? ; size of direct color blue mask in bits
- UCHAR BlueFieldPosition; // db ? ; bit position of lsb of blue mask
- UCHAR RsvdMaskSize; // db ? ; size of direct color reserved mask in bits
- UCHAR RsvdFieldPosition; // db ? ; bit position of lsb of reserved mask
- UCHAR DirectColorModeInfo;// db ? ; direct color mode attributes
-
-//; Mandatory information for VBE 2.0 and above
- ULONG PhysBasePtr; // dd ? ; physical address for flat memory frame buffer
- ULONG Reserved_1; // dd 0 ; reserved - always set to 0
- USHORT Reserved_2; // dw 0 ; reserved - always set to 0
-
-//; Mandatory information for VBE 3.0 and above
- USHORT LinBytesPerScanLine; // dw ? ; bytes per scan line for linear modes
- UCHAR BnkNumberOfImagePages;// db ? ; number of images for banked modes
- UCHAR LinNumberOfImagPages; // db ? ; number of images for linear modes
- UCHAR LinRedMaskSize; // db ? ; size of direct color red mask(linear modes)
- UCHAR LinRedFieldPosition; // db ? ; bit position of lsb of red mask(linear modes)
- UCHAR LinGreenMaskSize; // db ? ; size of direct color green mask(linear modes)
- UCHAR LinGreenFieldPosition;// db ? ; bit position of lsb of green mask(linear modes)
- UCHAR LinBlueMaskSize; // db ? ; size of direct color blue mask(linear modes)
- UCHAR LinBlueFieldPosition; // db ? ; bit position of lsb of blue mask(linear modes)
- UCHAR LinRsvdMaskSize; // db ? ; size of direct color reserved mask(linear modes)
- UCHAR LinRsvdFieldPosition; // db ? ; bit position of lsb of reserved mask(linear modes)
- ULONG MaxPixelClock; // dd ? ; maximum pixel clock(in Hz) for graphics mode
- UCHAR Reserved; // db 190 dup (0)
-} VESA_MODE_INFO_BLOCK;
-
-// BIOS function CALLS
-#define ATOM_BIOS_EXTENDED_FUNCTION_CODE 0xA0 // ATI Extended Function code
-#define ATOM_BIOS_FUNCTION_COP_MODE 0x00
-#define ATOM_BIOS_FUNCTION_SHORT_QUERY1 0x04
-#define ATOM_BIOS_FUNCTION_SHORT_QUERY2 0x05
-#define ATOM_BIOS_FUNCTION_SHORT_QUERY3 0x06
-#define ATOM_BIOS_FUNCTION_GET_DDC 0x0B
-#define ATOM_BIOS_FUNCTION_ASIC_DSTATE 0x0E
-#define ATOM_BIOS_FUNCTION_DEBUG_PLAY 0x0F
-#define ATOM_BIOS_FUNCTION_STV_STD 0x16
-#define ATOM_BIOS_FUNCTION_DEVICE_DET 0x17
-#define ATOM_BIOS_FUNCTION_DEVICE_SWITCH 0x18
-
-#define ATOM_BIOS_FUNCTION_PANEL_CONTROL 0x82
-#define ATOM_BIOS_FUNCTION_OLD_DEVICE_DET 0x83
-#define ATOM_BIOS_FUNCTION_OLD_DEVICE_SWITCH 0x84
-#define ATOM_BIOS_FUNCTION_HW_ICON 0x8A
-#define ATOM_BIOS_FUNCTION_SET_CMOS 0x8B
-#define SUB_FUNCTION_UPDATE_DISPLAY_INFO 0x8000 // Sub function 80
-#define SUB_FUNCTION_UPDATE_EXPANSION_INFO 0x8100 // Sub function 80
-
-#define ATOM_BIOS_FUNCTION_DISPLAY_INFO 0x8D
-#define ATOM_BIOS_FUNCTION_DEVICE_ON_OFF 0x8E
-#define ATOM_BIOS_FUNCTION_VIDEO_STATE 0x8F
-#define ATOM_SUB_FUNCTION_GET_CRITICAL_STATE 0x0300 // Sub function 03
-#define ATOM_SUB_FUNCTION_GET_LIDSTATE 0x0700 // Sub function 7
-#define ATOM_SUB_FUNCTION_THERMAL_STATE_NOTICE 0x1400 // Notify caller the current thermal state
-#define ATOM_SUB_FUNCTION_CRITICAL_STATE_NOTICE 0x8300 // Notify caller the current critical state
-#define ATOM_SUB_FUNCTION_SET_LIDSTATE 0x8500 // Sub function 85
-#define ATOM_SUB_FUNCTION_GET_REQ_DISPLAY_FROM_SBIOS_MODE 0x8900// Sub function 89
-#define ATOM_SUB_FUNCTION_INFORM_ADC_SUPPORT 0x9400 // Notify caller that ADC is supported
-
-
-#define ATOM_BIOS_FUNCTION_VESA_DPMS 0x4F10 // Set DPMS
-#define ATOM_SUB_FUNCTION_SET_DPMS 0x0001 // BL: Sub function 01
-#define ATOM_SUB_FUNCTION_GET_DPMS 0x0002 // BL: Sub function 02
-#define ATOM_PARAMETER_VESA_DPMS_ON 0x0000 // BH Parameter for DPMS ON.
-#define ATOM_PARAMETER_VESA_DPMS_STANDBY 0x0100 // BH Parameter for DPMS STANDBY
-#define ATOM_PARAMETER_VESA_DPMS_SUSPEND 0x0200 // BH Parameter for DPMS SUSPEND
-#define ATOM_PARAMETER_VESA_DPMS_OFF 0x0400 // BH Parameter for DPMS OFF
-#define ATOM_PARAMETER_VESA_DPMS_REDUCE_ON 0x0800 // BH Parameter for DPMS REDUCE ON (NOT SUPPORTED)
-
-#define ATOM_BIOS_RETURN_CODE_MASK 0x0000FF00L
-#define ATOM_BIOS_REG_HIGH_MASK 0x0000FF00L
-#define ATOM_BIOS_REG_LOW_MASK 0x000000FFL
-
-// structure used for VBIOS only
-
-//DispOutInfoTable
-typedef struct _ASIC_TRANSMITTER_INFO
-{
- USHORT usTransmitterObjId;
- USHORT usSupportDevice;
- UCHAR ucTransmitterCmdTblId;
- UCHAR ucConfig;
- UCHAR ucEncoderID; //available 1st encoder ( default )
- UCHAR ucOptionEncoderID; //available 2nd encoder ( optional )
- UCHAR uc2ndEncoderID;
- UCHAR ucReserved;
-}ASIC_TRANSMITTER_INFO;
-
-typedef struct _ASIC_ENCODER_INFO
-{
- UCHAR ucEncoderID;
- UCHAR ucEncoderConfig;
- USHORT usEncoderCmdTblId;
-}ASIC_ENCODER_INFO;
-
-typedef struct _ATOM_DISP_OUT_INFO
-{
- ATOM_COMMON_TABLE_HEADER sHeader;
- USHORT ptrTransmitterInfo;
- USHORT ptrEncoderInfo;
- ASIC_TRANSMITTER_INFO asTransmitterInfo[1];
- ASIC_ENCODER_INFO asEncoderInfo[1];
-}ATOM_DISP_OUT_INFO;
-
-// DispDevicePriorityInfo
-typedef struct _ATOM_DISPLAY_DEVICE_PRIORITY_INFO
-{
- ATOM_COMMON_TABLE_HEADER sHeader;
- USHORT asDevicePriority[16];
-}ATOM_DISPLAY_DEVICE_PRIORITY_INFO;
-
-//ProcessAuxChannelTransactionTable
-typedef struct _PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS
-{
- USHORT lpAuxRequest;
- USHORT lpDataOut;
- UCHAR ucChannelID;
- union
- {
- UCHAR ucReplyStatus;
- UCHAR ucDelay;
- };
- UCHAR ucDataOutLen;
- UCHAR ucReserved;
-}PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS;
-
-#define PROCESS_AUX_CHANNEL_TRANSACTION_PS_ALLOCATION PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS
-
-//GetSinkType
-
-typedef struct _DP_ENCODER_SERVICE_PARAMETERS
-{
- USHORT ucLinkClock;
- union
- {
- UCHAR ucConfig; // for DP training command
- UCHAR ucI2cId; // use for GET_SINK_TYPE command
- };
- UCHAR ucAction;
- UCHAR ucStatus;
- UCHAR ucLaneNum;
- UCHAR ucReserved[2];
-}DP_ENCODER_SERVICE_PARAMETERS;
-
-// ucAction
-#define ATOM_DP_ACTION_GET_SINK_TYPE 0x01
-#define ATOM_DP_ACTION_TRAINING_START 0x02
-#define ATOM_DP_ACTION_TRAINING_COMPLETE 0x03
-#define ATOM_DP_ACTION_TRAINING_PATTERN_SEL 0x04
-#define ATOM_DP_ACTION_SET_VSWING_PREEMP 0x05
-#define ATOM_DP_ACTION_GET_VSWING_PREEMP 0x06
-#define ATOM_DP_ACTION_BLANKING 0x07
-
-// ucConfig
-#define ATOM_DP_CONFIG_ENCODER_SEL_MASK 0x03
-#define ATOM_DP_CONFIG_DIG1_ENCODER 0x00
-#define ATOM_DP_CONFIG_DIG2_ENCODER 0x01
-#define ATOM_DP_CONFIG_EXTERNAL_ENCODER 0x02
-#define ATOM_DP_CONFIG_LINK_SEL_MASK 0x04
-#define ATOM_DP_CONFIG_LINK_A 0x00
-#define ATOM_DP_CONFIG_LINK_B 0x04
-
-#define DP_ENCODER_SERVICE_PS_ALLOCATION WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS
-
-// DP_TRAINING_TABLE
-#define DPCD_SET_LINKRATE_LANENUM_PATTERN1_TBL_ADDR ATOM_DP_TRAINING_TBL_ADDR
-#define DPCD_SET_SS_CNTL_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 8 )
-#define DPCD_SET_LANE_VSWING_PREEMP_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 16 )
-#define DPCD_SET_TRAINING_PATTERN0_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 24 )
-#define DPCD_SET_TRAINING_PATTERN2_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 32)
-#define DPCD_GET_LINKRATE_LANENUM_SS_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 40)
-#define DPCD_GET_LANE_STATUS_ADJUST_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 48)
-#define DP_I2C_AUX_DDC_WRITE_START_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 60)
-#define DP_I2C_AUX_DDC_WRITE_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 64)
-#define DP_I2C_AUX_DDC_READ_START_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 72)
-#define DP_I2C_AUX_DDC_READ_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 76)
-#define DP_I2C_AUX_DDC_READ_END_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 80)
-
-
-typedef struct _PROCESS_I2C_CHANNEL_TRANSACTION_PARAMETERS
-{
- UCHAR ucI2CSpeed;
- union
- {
- UCHAR ucRegIndex;
- UCHAR ucStatus;
- };
- USHORT lpI2CDataOut;
- UCHAR ucFlag;
- UCHAR ucTransBytes;
- UCHAR ucSlaveAddr;
- UCHAR ucLineNumber;
-}PROCESS_I2C_CHANNEL_TRANSACTION_PARAMETERS;
-
-#define PROCESS_I2C_CHANNEL_TRANSACTION_PS_ALLOCATION PROCESS_I2C_CHANNEL_TRANSACTION_PARAMETERS
-
-//ucFlag
-#define HW_I2C_WRITE 1
-#define HW_I2C_READ 0
-
-
-/****************************************************************************/
-//Portion VI: Definitinos being oboselete
-/****************************************************************************/
-
-//==========================================================================================
-//Remove the definitions below when driver is ready!
-typedef struct _ATOM_DAC_INFO
-{
- ATOM_COMMON_TABLE_HEADER sHeader;
- USHORT usMaxFrequency; // in 10kHz unit
- USHORT usReserved;
-}ATOM_DAC_INFO;
-
-
-typedef struct _COMPASSIONATE_DATA
-{
- ATOM_COMMON_TABLE_HEADER sHeader;
-
- //============================== DAC1 portion
- UCHAR ucDAC1_BG_Adjustment;
- UCHAR ucDAC1_DAC_Adjustment;
- USHORT usDAC1_FORCE_Data;
- //============================== DAC2 portion
- UCHAR ucDAC2_CRT2_BG_Adjustment;
- UCHAR ucDAC2_CRT2_DAC_Adjustment;
- USHORT usDAC2_CRT2_FORCE_Data;
- USHORT usDAC2_CRT2_MUX_RegisterIndex;
- UCHAR ucDAC2_CRT2_MUX_RegisterInfo; //Bit[4:0]=Bit position,Bit[7]=1:Active High;=0 Active Low
- UCHAR ucDAC2_NTSC_BG_Adjustment;
- UCHAR ucDAC2_NTSC_DAC_Adjustment;
- USHORT usDAC2_TV1_FORCE_Data;
- USHORT usDAC2_TV1_MUX_RegisterIndex;
- UCHAR ucDAC2_TV1_MUX_RegisterInfo; //Bit[4:0]=Bit position,Bit[7]=1:Active High;=0 Active Low
- UCHAR ucDAC2_CV_BG_Adjustment;
- UCHAR ucDAC2_CV_DAC_Adjustment;
- USHORT usDAC2_CV_FORCE_Data;
- USHORT usDAC2_CV_MUX_RegisterIndex;
- UCHAR ucDAC2_CV_MUX_RegisterInfo; //Bit[4:0]=Bit position,Bit[7]=1:Active High;=0 Active Low
- UCHAR ucDAC2_PAL_BG_Adjustment;
- UCHAR ucDAC2_PAL_DAC_Adjustment;
- USHORT usDAC2_TV2_FORCE_Data;
-}COMPASSIONATE_DATA;
-
-/****************************Supported Device Info Table Definitions**********************/
-// ucConnectInfo:
-// [7:4] - connector type
-// = 1 - VGA connector
-// = 2 - DVI-I
-// = 3 - DVI-D
-// = 4 - DVI-A
-// = 5 - SVIDEO
-// = 6 - COMPOSITE
-// = 7 - LVDS
-// = 8 - DIGITAL LINK
-// = 9 - SCART
-// = 0xA - HDMI_type A
-// = 0xB - HDMI_type B
-// = 0xE - Special case1 (DVI+DIN)
-// Others=TBD
-// [3:0] - DAC Associated
-// = 0 - no DAC
-// = 1 - DACA
-// = 2 - DACB
-// = 3 - External DAC
-// Others=TBD
-//
-
-typedef struct _ATOM_CONNECTOR_INFO
-{
-#if ATOM_BIG_ENDIAN
- UCHAR bfConnectorType:4;
- UCHAR bfAssociatedDAC:4;
-#else
- UCHAR bfAssociatedDAC:4;
- UCHAR bfConnectorType:4;
-#endif
-}ATOM_CONNECTOR_INFO;
-
-typedef union _ATOM_CONNECTOR_INFO_ACCESS
-{
- ATOM_CONNECTOR_INFO sbfAccess;
- UCHAR ucAccess;
-}ATOM_CONNECTOR_INFO_ACCESS;
-
-typedef struct _ATOM_CONNECTOR_INFO_I2C
-{
- ATOM_CONNECTOR_INFO_ACCESS sucConnectorInfo;
- ATOM_I2C_ID_CONFIG_ACCESS sucI2cId;
-}ATOM_CONNECTOR_INFO_I2C;
-
-
-typedef struct _ATOM_SUPPORTED_DEVICES_INFO
-{
- ATOM_COMMON_TABLE_HEADER sHeader;
- USHORT usDeviceSupport;
- ATOM_CONNECTOR_INFO_I2C asConnInfo[ATOM_MAX_SUPPORTED_DEVICE_INFO];
-}ATOM_SUPPORTED_DEVICES_INFO;
-
-#define NO_INT_SRC_MAPPED 0xFF
-
-typedef struct _ATOM_CONNECTOR_INC_SRC_BITMAP
-{
- UCHAR ucIntSrcBitmap;
-}ATOM_CONNECTOR_INC_SRC_BITMAP;
-
-typedef struct _ATOM_SUPPORTED_DEVICES_INFO_2
-{
- ATOM_COMMON_TABLE_HEADER sHeader;
- USHORT usDeviceSupport;
- ATOM_CONNECTOR_INFO_I2C asConnInfo[ATOM_MAX_SUPPORTED_DEVICE_INFO_2];
- ATOM_CONNECTOR_INC_SRC_BITMAP asIntSrcInfo[ATOM_MAX_SUPPORTED_DEVICE_INFO_2];
-}ATOM_SUPPORTED_DEVICES_INFO_2;
-
-typedef struct _ATOM_SUPPORTED_DEVICES_INFO_2d1
-{
- ATOM_COMMON_TABLE_HEADER sHeader;
- USHORT usDeviceSupport;
- ATOM_CONNECTOR_INFO_I2C asConnInfo[ATOM_MAX_SUPPORTED_DEVICE];
- ATOM_CONNECTOR_INC_SRC_BITMAP asIntSrcInfo[ATOM_MAX_SUPPORTED_DEVICE];
-}ATOM_SUPPORTED_DEVICES_INFO_2d1;
-
-#define ATOM_SUPPORTED_DEVICES_INFO_LAST ATOM_SUPPORTED_DEVICES_INFO_2d1
-
-
-
-typedef struct _ATOM_MISC_CONTROL_INFO
-{
- USHORT usFrequency;
- UCHAR ucPLL_ChargePump; // PLL charge-pump gain control
- UCHAR ucPLL_DutyCycle; // PLL duty cycle control
- UCHAR ucPLL_VCO_Gain; // PLL VCO gain control
- UCHAR ucPLL_VoltageSwing; // PLL driver voltage swing control
-}ATOM_MISC_CONTROL_INFO;
-
-
-#define ATOM_MAX_MISC_INFO 4
-
-typedef struct _ATOM_TMDS_INFO
-{
- ATOM_COMMON_TABLE_HEADER sHeader;
- USHORT usMaxFrequency; // in 10Khz
- ATOM_MISC_CONTROL_INFO asMiscInfo[ATOM_MAX_MISC_INFO];
-}ATOM_TMDS_INFO;
-
-
-typedef struct _ATOM_ENCODER_ANALOG_ATTRIBUTE
-{
- UCHAR ucTVStandard; //Same as TV standards defined above,
- UCHAR ucPadding[1];
-}ATOM_ENCODER_ANALOG_ATTRIBUTE;
-
-typedef struct _ATOM_ENCODER_DIGITAL_ATTRIBUTE
-{
- UCHAR ucAttribute; //Same as other digital encoder attributes defined above
- UCHAR ucPadding[1];
-}ATOM_ENCODER_DIGITAL_ATTRIBUTE;
-
-typedef union _ATOM_ENCODER_ATTRIBUTE
-{
- ATOM_ENCODER_ANALOG_ATTRIBUTE sAlgAttrib;
- ATOM_ENCODER_DIGITAL_ATTRIBUTE sDigAttrib;
-}ATOM_ENCODER_ATTRIBUTE;
-
-
-typedef struct _DVO_ENCODER_CONTROL_PARAMETERS
-{
- USHORT usPixelClock;
- USHORT usEncoderID;
- UCHAR ucDeviceType; //Use ATOM_DEVICE_xxx1_Index to indicate device type only.
- UCHAR ucAction; //ATOM_ENABLE/ATOM_DISABLE/ATOM_HPD_INIT
- ATOM_ENCODER_ATTRIBUTE usDevAttr;
-}DVO_ENCODER_CONTROL_PARAMETERS;
-
-typedef struct _DVO_ENCODER_CONTROL_PS_ALLOCATION
-{
- DVO_ENCODER_CONTROL_PARAMETERS sDVOEncoder;
- WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved; //Caller doesn't need to init this portion
-}DVO_ENCODER_CONTROL_PS_ALLOCATION;
-
-
-#define ATOM_XTMDS_ASIC_SI164_ID 1
-#define ATOM_XTMDS_ASIC_SI178_ID 2
-#define ATOM_XTMDS_ASIC_TFP513_ID 3
-#define ATOM_XTMDS_SUPPORTED_SINGLELINK 0x00000001
-#define ATOM_XTMDS_SUPPORTED_DUALLINK 0x00000002
-#define ATOM_XTMDS_MVPU_FPGA 0x00000004
-
-
-typedef struct _ATOM_XTMDS_INFO
-{
- ATOM_COMMON_TABLE_HEADER sHeader;
- USHORT usSingleLinkMaxFrequency;
- ATOM_I2C_ID_CONFIG_ACCESS sucI2cId; //Point the ID on which I2C is used to control external chip
- UCHAR ucXtransimitterID;
- UCHAR ucSupportedLink; // Bit field, bit0=1, single link supported;bit1=1,dual link supported
- UCHAR ucSequnceAlterID; // Even with the same external TMDS asic, it's possible that the program seqence alters
- // due to design. This ID is used to alert driver that the sequence is not "standard"!
- UCHAR ucMasterAddress; // Address to control Master xTMDS Chip
- UCHAR ucSlaveAddress; // Address to control Slave xTMDS Chip
-}ATOM_XTMDS_INFO;
-
-typedef struct _DFP_DPMS_STATUS_CHANGE_PARAMETERS
-{
- UCHAR ucEnable; // ATOM_ENABLE=On or ATOM_DISABLE=Off
- UCHAR ucDevice; // ATOM_DEVICE_DFP1_INDEX....
- UCHAR ucPadding[2];
-}DFP_DPMS_STATUS_CHANGE_PARAMETERS;
-
-/****************************Legacy Power Play Table Definitions **********************/
-
-//Definitions for ulPowerPlayMiscInfo
-#define ATOM_PM_MISCINFO_SPLIT_CLOCK 0x00000000L
-#define ATOM_PM_MISCINFO_USING_MCLK_SRC 0x00000001L
-#define ATOM_PM_MISCINFO_USING_SCLK_SRC 0x00000002L
-
-#define ATOM_PM_MISCINFO_VOLTAGE_DROP_SUPPORT 0x00000004L
-#define ATOM_PM_MISCINFO_VOLTAGE_DROP_ACTIVE_HIGH 0x00000008L
-
-#define ATOM_PM_MISCINFO_LOAD_PERFORMANCE_EN 0x00000010L
-
-#define ATOM_PM_MISCINFO_ENGINE_CLOCK_CONTRL_EN 0x00000020L
-#define ATOM_PM_MISCINFO_MEMORY_CLOCK_CONTRL_EN 0x00000040L
-#define ATOM_PM_MISCINFO_PROGRAM_VOLTAGE 0x00000080L //When this bit set, ucVoltageDropIndex is not an index for GPIO pin, but a voltage ID that SW needs program
-
-#define ATOM_PM_MISCINFO_ASIC_REDUCED_SPEED_SCLK_EN 0x00000100L
-#define ATOM_PM_MISCINFO_ASIC_DYNAMIC_VOLTAGE_EN 0x00000200L
-#define ATOM_PM_MISCINFO_ASIC_SLEEP_MODE_EN 0x00000400L
-#define ATOM_PM_MISCINFO_LOAD_BALANCE_EN 0x00000800L
-#define ATOM_PM_MISCINFO_DEFAULT_DC_STATE_ENTRY_TRUE 0x00001000L
-#define ATOM_PM_MISCINFO_DEFAULT_LOW_DC_STATE_ENTRY_TRUE 0x00002000L
-#define ATOM_PM_MISCINFO_LOW_LCD_REFRESH_RATE 0x00004000L
-
-#define ATOM_PM_MISCINFO_DRIVER_DEFAULT_MODE 0x00008000L
-#define ATOM_PM_MISCINFO_OVER_CLOCK_MODE 0x00010000L
-#define ATOM_PM_MISCINFO_OVER_DRIVE_MODE 0x00020000L
-#define ATOM_PM_MISCINFO_POWER_SAVING_MODE 0x00040000L
-#define ATOM_PM_MISCINFO_THERMAL_DIODE_MODE 0x00080000L
-
-#define ATOM_PM_MISCINFO_FRAME_MODULATION_MASK 0x00300000L //0-FM Disable, 1-2 level FM, 2-4 level FM, 3-Reserved
-#define ATOM_PM_MISCINFO_FRAME_MODULATION_SHIFT 20
-
-#define ATOM_PM_MISCINFO_DYN_CLK_3D_IDLE 0x00400000L
-#define ATOM_PM_MISCINFO_DYNAMIC_CLOCK_DIVIDER_BY_2 0x00800000L
-#define ATOM_PM_MISCINFO_DYNAMIC_CLOCK_DIVIDER_BY_4 0x01000000L
-#define ATOM_PM_MISCINFO_DYNAMIC_HDP_BLOCK_EN 0x02000000L //When set, Dynamic
-#define ATOM_PM_MISCINFO_DYNAMIC_MC_HOST_BLOCK_EN 0x04000000L //When set, Dynamic
-#define ATOM_PM_MISCINFO_3D_ACCELERATION_EN 0x08000000L //When set, This mode is for acceleated 3D mode
-
-#define ATOM_PM_MISCINFO_POWERPLAY_SETTINGS_GROUP_MASK 0x70000000L //1-Optimal Battery Life Group, 2-High Battery, 3-Balanced, 4-High Performance, 5- Optimal Performance (Default state with Default clocks)
-#define ATOM_PM_MISCINFO_POWERPLAY_SETTINGS_GROUP_SHIFT 28
-#define ATOM_PM_MISCINFO_ENABLE_BACK_BIAS 0x80000000L
-
-#define ATOM_PM_MISCINFO2_SYSTEM_AC_LITE_MODE 0x00000001L
-#define ATOM_PM_MISCINFO2_MULTI_DISPLAY_SUPPORT 0x00000002L
-#define ATOM_PM_MISCINFO2_DYNAMIC_BACK_BIAS_EN 0x00000004L
-#define ATOM_PM_MISCINFO2_FS3D_OVERDRIVE_INFO 0x00000008L
-#define ATOM_PM_MISCINFO2_FORCEDLOWPWR_MODE 0x00000010L
-#define ATOM_PM_MISCINFO2_VDDCI_DYNAMIC_VOLTAGE_EN 0x00000020L
-#define ATOM_PM_MISCINFO2_VIDEO_PLAYBACK_CAPABLE 0x00000040L //If this bit is set in multi-pp mode, then driver will pack up one with the minior power consumption.
- //If it's not set in any pp mode, driver will use its default logic to pick a pp mode in video playback
-#define ATOM_PM_MISCINFO2_NOT_VALID_ON_DC 0x00000080L
-#define ATOM_PM_MISCINFO2_STUTTER_MODE_EN 0x00000100L
-#define ATOM_PM_MISCINFO2_UVD_SUPPORT_MODE 0x00000200L
-
-//ucTableFormatRevision=1
-//ucTableContentRevision=1
-typedef struct _ATOM_POWERMODE_INFO
-{
- ULONG ulMiscInfo; //The power level should be arranged in ascending order
- ULONG ulReserved1; // must set to 0
- ULONG ulReserved2; // must set to 0
- USHORT usEngineClock;
- USHORT usMemoryClock;
- UCHAR ucVoltageDropIndex; // index to GPIO table
- UCHAR ucSelectedPanel_RefreshRate;// panel refresh rate
- UCHAR ucMinTemperature;
- UCHAR ucMaxTemperature;
- UCHAR ucNumPciELanes; // number of PCIE lanes
-}ATOM_POWERMODE_INFO;
-
-//ucTableFormatRevision=2
-//ucTableContentRevision=1
-typedef struct _ATOM_POWERMODE_INFO_V2
-{
- ULONG ulMiscInfo; //The power level should be arranged in ascending order
- ULONG ulMiscInfo2;
- ULONG ulEngineClock;
- ULONG ulMemoryClock;
- UCHAR ucVoltageDropIndex; // index to GPIO table
- UCHAR ucSelectedPanel_RefreshRate;// panel refresh rate
- UCHAR ucMinTemperature;
- UCHAR ucMaxTemperature;
- UCHAR ucNumPciELanes; // number of PCIE lanes
-}ATOM_POWERMODE_INFO_V2;
-
-//ucTableFormatRevision=2
-//ucTableContentRevision=2
-typedef struct _ATOM_POWERMODE_INFO_V3
-{
- ULONG ulMiscInfo; //The power level should be arranged in ascending order
- ULONG ulMiscInfo2;
- ULONG ulEngineClock;
- ULONG ulMemoryClock;
- UCHAR ucVoltageDropIndex; // index to Core (VDDC) votage table
- UCHAR ucSelectedPanel_RefreshRate;// panel refresh rate
- UCHAR ucMinTemperature;
- UCHAR ucMaxTemperature;
- UCHAR ucNumPciELanes; // number of PCIE lanes
- UCHAR ucVDDCI_VoltageDropIndex; // index to VDDCI votage table
-}ATOM_POWERMODE_INFO_V3;
-
-
-#define ATOM_MAX_NUMBEROF_POWER_BLOCK 8
-
-#define ATOM_PP_OVERDRIVE_INTBITMAP_AUXWIN 0x01
-#define ATOM_PP_OVERDRIVE_INTBITMAP_OVERDRIVE 0x02
-
-#define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_LM63 0x01
-#define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_ADM1032 0x02
-#define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_ADM1030 0x03
-#define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_MUA6649 0x04
-#define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_LM64 0x05
-#define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_F75375 0x06
-#define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_ASC7512 0x07 // Andigilog
-
-
-typedef struct _ATOM_POWERPLAY_INFO
-{
- ATOM_COMMON_TABLE_HEADER sHeader;
- UCHAR ucOverdriveThermalController;
- UCHAR ucOverdriveI2cLine;
- UCHAR ucOverdriveIntBitmap;
- UCHAR ucOverdriveControllerAddress;
- UCHAR ucSizeOfPowerModeEntry;
- UCHAR ucNumOfPowerModeEntries;
- ATOM_POWERMODE_INFO asPowerPlayInfo[ATOM_MAX_NUMBEROF_POWER_BLOCK];
-}ATOM_POWERPLAY_INFO;
-
-typedef struct _ATOM_POWERPLAY_INFO_V2
-{
- ATOM_COMMON_TABLE_HEADER sHeader;
- UCHAR ucOverdriveThermalController;
- UCHAR ucOverdriveI2cLine;
- UCHAR ucOverdriveIntBitmap;
- UCHAR ucOverdriveControllerAddress;
- UCHAR ucSizeOfPowerModeEntry;
- UCHAR ucNumOfPowerModeEntries;
- ATOM_POWERMODE_INFO_V2 asPowerPlayInfo[ATOM_MAX_NUMBEROF_POWER_BLOCK];
-}ATOM_POWERPLAY_INFO_V2;
-
-typedef struct _ATOM_POWERPLAY_INFO_V3
-{
- ATOM_COMMON_TABLE_HEADER sHeader;
- UCHAR ucOverdriveThermalController;
- UCHAR ucOverdriveI2cLine;
- UCHAR ucOverdriveIntBitmap;
- UCHAR ucOverdriveControllerAddress;
- UCHAR ucSizeOfPowerModeEntry;
- UCHAR ucNumOfPowerModeEntries;
- ATOM_POWERMODE_INFO_V3 asPowerPlayInfo[ATOM_MAX_NUMBEROF_POWER_BLOCK];
-}ATOM_POWERPLAY_INFO_V3;
-
-
-
-/**************************************************************************/
-
-
-// Following definitions are for compatiblity issue in different SW components.
-#define ATOM_MASTER_DATA_TABLE_REVISION 0x01
-#define Object_Info Object_Header
-#define AdjustARB_SEQ MC_InitParameter
-#define VRAM_GPIO_DetectionInfo VoltageObjectInfo
-#define ASIC_VDDCI_Info ASIC_ProfilingInfo
-#define ASIC_MVDDQ_Info MemoryTrainingInfo
-#define SS_Info PPLL_SS_Info
-#define ASIC_MVDDC_Info ASIC_InternalSS_Info
-#define DispDevicePriorityInfo SaveRestoreInfo
-#define DispOutInfo TV_VideoMode
-
-
-#define ATOM_ENCODER_OBJECT_TABLE ATOM_OBJECT_TABLE
-#define ATOM_CONNECTOR_OBJECT_TABLE ATOM_OBJECT_TABLE
-
-//New device naming, remove them when both DAL/VBIOS is ready
-#define DFP2I_OUTPUT_CONTROL_PARAMETERS CRT1_OUTPUT_CONTROL_PARAMETERS
-#define DFP2I_OUTPUT_CONTROL_PS_ALLOCATION DFP2I_OUTPUT_CONTROL_PARAMETERS
-
-#define DFP1X_OUTPUT_CONTROL_PARAMETERS CRT1_OUTPUT_CONTROL_PARAMETERS
-#define DFP1X_OUTPUT_CONTROL_PS_ALLOCATION DFP1X_OUTPUT_CONTROL_PARAMETERS
-
-#define DFP1I_OUTPUT_CONTROL_PARAMETERS DFP1_OUTPUT_CONTROL_PARAMETERS
-#define DFP1I_OUTPUT_CONTROL_PS_ALLOCATION DFP1_OUTPUT_CONTROL_PS_ALLOCATION
-
-#define ATOM_DEVICE_DFP1I_SUPPORT ATOM_DEVICE_DFP1_SUPPORT
-#define ATOM_DEVICE_DFP1X_SUPPORT ATOM_DEVICE_DFP2_SUPPORT
-
-#define ATOM_DEVICE_DFP1I_INDEX ATOM_DEVICE_DFP1_INDEX
-#define ATOM_DEVICE_DFP1X_INDEX ATOM_DEVICE_DFP2_INDEX
-
-#define ATOM_DEVICE_DFP2I_INDEX 0x00000009
-#define ATOM_DEVICE_DFP2I_SUPPORT (0x1L << ATOM_DEVICE_DFP2I_INDEX)
-
-#define ATOM_S0_DFP1I ATOM_S0_DFP1
-#define ATOM_S0_DFP1X ATOM_S0_DFP2
-
-#define ATOM_S0_DFP2I 0x00200000L
-#define ATOM_S0_DFP2Ib2 0x20
-
-#define ATOM_S2_DFP1I_DPMS_STATE ATOM_S2_DFP1_DPMS_STATE
-#define ATOM_S2_DFP1X_DPMS_STATE ATOM_S2_DFP2_DPMS_STATE
-
-#define ATOM_S2_DFP2I_DPMS_STATE 0x02000000L
-#define ATOM_S2_DFP2I_DPMS_STATEb3 0x02
-
-#define ATOM_S3_DFP2I_ACTIVEb1 0x02
-
-#define ATOM_S3_DFP1I_ACTIVE ATOM_S3_DFP1_ACTIVE
-#define ATOM_S3_DFP1X_ACTIVE ATOM_S3_DFP2_ACTIVE
-
-#define ATOM_S3_DFP2I_ACTIVE 0x00000200L
-
-#define ATOM_S3_DFP1I_CRTC_ACTIVE ATOM_S3_DFP1_CRTC_ACTIVE
-#define ATOM_S3_DFP1X_CRTC_ACTIVE ATOM_S3_DFP2_CRTC_ACTIVE
-#define ATOM_S3_DFP2I_CRTC_ACTIVE 0x02000000L
-
-#define ATOM_S3_DFP2I_CRTC_ACTIVEb3 0x02
-#define ATOM_S5_DOS_REQ_DFP2Ib1 0x02
-
-#define ATOM_S5_DOS_REQ_DFP2I 0x0200
-#define ATOM_S6_ACC_REQ_DFP1I ATOM_S6_ACC_REQ_DFP1
-#define ATOM_S6_ACC_REQ_DFP1X ATOM_S6_ACC_REQ_DFP2
-
-#define ATOM_S6_ACC_REQ_DFP2Ib3 0x02
-#define ATOM_S6_ACC_REQ_DFP2I 0x02000000L
-
-#define TMDS1XEncoderControl DVOEncoderControl
-#define DFP1XOutputControl DVOOutputControl
-
-#define ExternalDFPOutputControl DFP1XOutputControl
-#define EnableExternalTMDS_Encoder TMDS1XEncoderControl
-
-#define DFP1IOutputControl TMDSAOutputControl
-#define DFP2IOutputControl LVTMAOutputControl
-
-#define DAC1_ENCODER_CONTROL_PARAMETERS DAC_ENCODER_CONTROL_PARAMETERS
-#define DAC1_ENCODER_CONTROL_PS_ALLOCATION DAC_ENCODER_CONTROL_PS_ALLOCATION
-
-#define DAC2_ENCODER_CONTROL_PARAMETERS DAC_ENCODER_CONTROL_PARAMETERS
-#define DAC2_ENCODER_CONTROL_PS_ALLOCATION DAC_ENCODER_CONTROL_PS_ALLOCATION
-
-#define ucDac1Standard ucDacStandard
-#define ucDac2Standard ucDacStandard
-
-#define TMDS1EncoderControl TMDSAEncoderControl
-#define TMDS2EncoderControl LVTMAEncoderControl
-
-#define DFP1OutputControl TMDSAOutputControl
-#define DFP2OutputControl LVTMAOutputControl
-#define CRT1OutputControl DAC1OutputControl
-#define CRT2OutputControl DAC2OutputControl
-
-//These two lines will be removed for sure in a few days, will follow up with Michael V.
-#define EnableLVDS_SS EnableSpreadSpectrumOnPPLL
-#define ENABLE_LVDS_SS_PARAMETERS_V3 ENABLE_SPREAD_SPECTRUM_ON_PPLL
-
-/*********************************************************************************/
-
-#pragma pack() // BIOS data must use byte aligment
-
-#endif /* _ATOMBIOS_H */