diff options
| -rw-r--r-- | shared-core/via_dma.c | 46 |
1 files changed, 40 insertions, 6 deletions
diff --git a/shared-core/via_dma.c b/shared-core/via_dma.c index 431738a9..63357107 100644 --- a/shared-core/via_dma.c +++ b/shared-core/via_dma.c @@ -406,6 +406,8 @@ static int via_hook_segment(drm_via_private_t * dev_priv, int paused, count; volatile uint32_t *paused_at = dev_priv->last_pause_ptr; uint32_t reader,ptr; + uint32_t data; + cycles_t time; paused = 0; via_flush_write_combine(); @@ -423,10 +425,17 @@ static int via_hook_segment(drm_via_private_t * dev_priv, while (!(paused = (VIA_READ(0x41c) & 0x80000000)) && count--); } + paused = VIA_READ(0x41c) & 0x80000000; if (paused && !no_pci_fire) { + uint32_t diff; reader = *(dev_priv->hw_addr_ptr); - if ((ptr - reader) == dev_priv->dma_diff) { - + diff = (uint32_t) (ptr - reader) - dev_priv->dma_diff; + diff &= (dev_priv->dma_high - 1); + if (diff != 0 && diff < (dev_priv->dma_high >> 1)) { + DRM_ERROR("Paused at incorrect address. " + "0x%08x, 0x%08x 0x%08x\n", + ptr, reader, dev_priv->dma_diff); + } else if (diff == 0) { /* * There is a concern that these writes may stall the PCI bus * if the GPU is not idle. However, idling the GPU first @@ -571,14 +580,14 @@ static void via_cmdbuf_jump(drm_via_private_t * dev_priv) uint32_t pause_addr_lo, pause_addr_hi; uint32_t jump_addr_lo, jump_addr_hi; volatile uint32_t *last_pause_ptr; - + uint32_t dma_low_save1, dma_low_save2; + agp_base = dev_priv->dma_offset + (uint32_t) dev_priv->agpAddr; via_align_cmd(dev_priv, HC_HAGPBpID_JUMP, 0, &jump_addr_hi, &jump_addr_lo, 0); dev_priv->dma_wrap = dev_priv->dma_low; - /* * Wrap command buffer to the beginning. */ @@ -590,15 +599,40 @@ static void via_cmdbuf_jump(drm_via_private_t * dev_priv) via_dummy_bitblt(dev_priv); via_dummy_bitblt(dev_priv); - last_pause_ptr = via_align_cmd(dev_priv, HC_HAGPBpID_PAUSE, 0, &pause_addr_hi, - &pause_addr_lo, 0) -1; + + last_pause_ptr = + via_align_cmd(dev_priv, HC_HAGPBpID_PAUSE, 0, &pause_addr_hi, + &pause_addr_lo, 0) - 1; via_align_cmd(dev_priv, HC_HAGPBpID_PAUSE, 0, &pause_addr_hi, &pause_addr_lo, 0); + *last_pause_ptr = pause_addr_lo; + dma_low_save1 = dev_priv->dma_low; + + /* + * Now, set a trap that will pause the regulator if it tries to rerun the old + * command buffer. (Which may happen if via_hook_segment detecs a command regulator pause + * and reissues the jump command over PCI, while the regulator has already taken the jump + * and actually paused at the current buffer end). + * There appears to be no other way to detect this condition, since the hw_addr_pointer + * does not seem to get updated immediately when a jump occurs. + */ + last_pause_ptr = + via_align_cmd(dev_priv, HC_HAGPBpID_PAUSE, 0, &pause_addr_hi, + &pause_addr_lo, 0) - 1; + via_align_cmd(dev_priv, HC_HAGPBpID_PAUSE, 0, &pause_addr_hi, + &pause_addr_lo, 0); + *last_pause_ptr = pause_addr_lo; + + dma_low_save2 = dev_priv->dma_low; + dev_priv->dma_low = dma_low_save1; via_hook_segment(dev_priv, jump_addr_hi, jump_addr_lo, 0); + dev_priv->dma_low = dma_low_save2; + via_hook_segment(dev_priv, pause_addr_hi, pause_addr_lo, 0); } + static void via_cmdbuf_rewind(drm_via_private_t * dev_priv) { via_cmdbuf_jump(dev_priv); |